Instruction/ maintenance manual of the product 1923B Makita
Go to page of 16
Power Planer PI an in g width 82 mm (3-1/4”) MODEL 1923B ~ ~~~~ __ Planing Rabbeting No load 0 vera I I Net depth depth speed (RPM) length weight INSTRUCTION MANUAL 82 mm (3-1 /4”) SPEC I FI CAT IO N S 293 mm 2.
IMPORTANT SAFETY INSTRUCTIONS (For All Tools) WARNING: WHEN USING ELECTRIC TOOLS, BASIC SAFE- REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, AND PER- TY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO SONAL INJURY, INCLUDING THE FOLLOWING: READ ALL INSTRUCTIONS. 1.
14. REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see that keys and adjusting wrenches are removed from tool before turning it on. 15. AVOID UNINTENTIONAL STARTING. Don't carry plugged-in tool with finger on switch. Be sure switch is OFF when plugging in.
ADDITIONAL SAFETY RULES 1. Rags, cloth, cord, string and the like should never be left around the work 2. Avoid cutting nails. Inspect for and remove all nails from the workpiece be- 3. Handle the blades very carefully. 4. Be sure the blade installation bolts are securely tightened before operation.
Removing or installing planer blades CAUTION : Always be sure that the tool is switched off and unplugged before removing or installing the blade. To remove the blades on the drum, un- screw the three installation bolts with the socket wrench. The drum cover comes off together with the blades.
3. Set the adjust platehet plate on the gauge base so that the planer blade locating lugs on the set plate rest in the mini planer blade groove, then press in the heel of the adjust plate flush with the back side of the gauge base and tighten the pan head screws.
For shiplapping, the blade edge should be made to protrude outside slightly (0.3 mm - 0.6 mm: 1/64" - 1/32"). Otherwise, nicks and generally poor ship- lapping results. I 4 I I I II CAUTION : Tighten the blade installation bolts carefully when attaching the blades to the tool.
Adjusting depth of cut Depth of cut may be adjusted by simply turning the knob on the front of the tool. Switch action To start the tool, simply pull the trigger. Release the trigger to stop. For continuous operation, pull the trigger and then push in the lock button.
Shiplapping To make a stepped cut as shown at the right, use the edge fence. Cutting line I Adjust the edge fence until it comes in con- tact with the side of the workpiece, then secure it by tightening the screw. You may wish to add to the length of the fence by attaching an extra piece of wood.
Chamfering To make a cut as shown at the right, align the "V" groove in the front base with the edge of the workpiece and plane it as shown in the figure (A). Use of nozzle assembly Use of the special nozzle assembly will minimize chip scatter, making for a cleaner work area.
Sharpening planer blades 71 Always keep your blades sharp for the best performance possible. Use the sharpening holder to remove nicks and produce a fine edge. First, loosen the two wing nuts on the holder and insert the blades (A) and (B) so that they contact the sides (C) and (D).
MAINTENANCE CAUTION : Always be sure that the tool is switched off and unplugged before attempting to perform inspection or maintenance. Replacing carbon brushes Remove and check the carbon brushes regularly. Replace when they wear down to the limit mark.
ACCESSORIES CAUTION : These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injuty to persons. The accessories or attachments should be used only in the proper and intended manner.
Fsb.-20-'87 EN 82 mm (3-1/4") POWER PLANER Model 1923B Note: The switch, noise suppressor and other part configurations may differ from country to country.
MODEL 19238 Mar-02 '89 US 10 11 12 'yoM A& DESCRIPTION 12 21 31 41 51 66 71 81 91 1 1 1 '7,'o" DESCRIPTION 34 35 36 37 38 39 40 41 42 43 44 45 1 1 2 1 1 1 1 1 1 1 1 1 Pan .
c t MAKITA LIMITED ONE YEAR WARRANTY Warranty Policy Every Makita tool is thoroughly inspected and tested before leaving the factory. It is warranted to be free of defects from workmanship and materials for the period of ONE YEAR from the date of original purchase.
An important point after buying a device Makita 1923B (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Makita 1923B yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Makita 1923B - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Makita 1923B you will learn all the available features of the product, as well as information on its operation. The information that you get Makita 1923B will certainly help you make a decision on the purchase.
If you already are a holder of Makita 1923B, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Makita 1923B.
However, one of the most important roles played by the user manual is to help in solving problems with Makita 1923B. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Makita 1923B along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
