EN
Abit logo
Official user manual

Abit IS7-E2V

96 pages·4.2 MB·Computer Hardware·PDF·ENDEFRITNLJA
Abit IS7-E2V
Table of Contents 78 sections IS7 Series (IS7-G, IS7, IS7-E, IS7-E2, IS7-E2G, · IS7-E2V, IS7-M, IS7-V2) · Intel Pentium 4 System Board · Socket 478 · … ShowHide
IS7 Series (IS7-G, IS7, IS7-E, IS7-E2, IS7-E2G,p.1IS7-E2V, IS7-M, IS7-V2)p.1Intel Pentium 4 System Boardp.1Socket 478p.1Appendix B. Install Intel Application Accelerator RAID (IS7-G, IS7) ..............B-1p.4Appendix E. Install Silicon Serial ATA RAID Driver (IS7-G) ...........................E-1p.4Chapter 1. Introductionp.51-1. Features & Specificationsp.51-2. Layout Diagram (IS7-G/IS7/IS7-E)p.81-3. Layout Diagram (IS7-E2/IS7-E2G/IS7-E2V)p.91-4. Layout Diagram (IS7-M)p.101-5. Layout Diagram (IS7-V2)p.11Chapter 2. Hardware Setupp.132-1. Install The Motherboardp.132-2. Install Pentium ® 4 CPU and Heatsink Supporting-Basep.142-3. Install System Memoryp.15 IS7-G/IS7/IS7-E/IS7-M:p.15IS7-G/IS7/IS7-E: IS7-M:p.15 IS7-E2/IS7-E2G/IS7-E2V/IS7-V2:p.16IS7-E2/IS7-E2G/IS7-E2V: IS7-V2:p.162-4. Connectors, Headers and Switchesp.18IS7-G/IS7/IS7-E: IS7-M: IS7-E2/IS7-E2G/IS7-E2V:p.18IS7-V2:p.18IS7-G/IS7/IS7-E:p.20IS7-M: IS7-E2/IS7-E2G/IS7-E2V: IS7-V2p.20IS7-E2/IS7-E2G/IS7-E2V: IS7-V2p.21IS7-M:p.26IS7-G/IS7:p.271 TPA0 + 2 TPA0 -p.273 GND 4 GNDp.275 TPB0 + 6 TPB0 -p.277 +12V 8 +12Vp.279 NC 10 GNDp.27IS7-M: IS7-E2/IS7-E2G/IS7-E2V: IS7-V2:p.29IS7-M/IS7-E2/IS7-E2G/ IS7-E2V/IS7-V2:p.33IS7-E2/IS7-E2G/IS7-V2:p.39IS7-E2V:p.39Chapter 3. BIOS Setupp.41PRESS DEL TO ENTER SETUPp.413-1. SoftMenu Setupp.423-2. Standard CMOS Featuresp.443-3. Advanced BIOS Featuresp.473-4. Advanced Chipset Featuresp.503-5. Integrated Peripheralsp.52 SATA RAID ROM:p.53(SATA1)p.543-6. Power Management Setupp.593-7. PnP/PCI Configurationsp.623-8. PC Health Statusp.643-9. Load Fail-Safe Defaultsp.653-10. Load Optimized Defaultsp.653-11. Set Passwordp.653-12. Save & Exit Setupp.653-13. Exit Without Savingp.65Appendix A. Install Intel Chipset Software Utilityp.67Appendix B. Install Intel Application Acceleratorp.69RAID (IS7-G, IS7)p.69Intel Serial ATA RAID Configuration Utility (IS7-G, IS7)p.71Appendix C. Install Audio Driverp.73Appendix D. Install LAN Driverp.75Appendix E. Install Silicon Serial ATA RAID Driverp.77(IS7-G)p.77BIOS Setup for Serial ATA RAID (IS7-G)p.79RAID Configuration Utility Menup.79Appendix F. Install VGA Driver (IS7-M)p.81Appendix G. Install USB 2.0 Driverp.83Appendix H. ABIT EQ (The Hardware Doctor Utility)p.85Appendix I. FlashMenu (BIOS Update Utility)p.87Appendix J. Troubleshooting (Need Assistance?)p.89Q & A:p.89 Technical Support Formp.92CPU *p.92HDD IDE1 IDE2p.92ADD-ON CARDp.92Appendix K. How to Get Technical Supportp.93Thank Youp.96ABIT Computer Corporationp.96http://www.abit.com.twp.96
Page 1 of the Abit IS7-E2V user manual — IS7 Series (IS7-G, IS7, IS7-E, IS7-E2, IS7-E2G,
Page 1 · click to enlarge
Page 1

IS7 Series (IS7-G, IS7, IS7-E, IS7-E2, IS7-E2G,

IS7-E2V, IS7-M, IS7-V2)

Intel Pentium 4 System Board

Socket 478

4200-0375-11 Rev. 1.06

Page 2 of the Abit IS7-E2V user manual — IS7 Series (IS7-G, IS7, IS7-E, IS7-E2, IS7-E2G,
Page 2 · click to enlarge
Page 2

Copyright and Warranty Notice

The information in this document is subject to change without notice and does not represent a commitment on part of the vendor, who assumes no liability or responsibility for any errors that may appear in this manual.

No warranty or representation, either expressed or implied, is made with respect to the quality, accuracy or fitness for any particular part of this document. In no event shall the manufacturer be liable for direct, indirect, special, incidental or consequential damages arising from any defect or error in this manual or product.

Product names appearing in this manual are for identification purpose only and trademarks and product names or brand names appearing in this document are the property of their respective owners.

This document contains materials protected under International Copyright Laws. All rights reserved. No part of this manual may be reproduced, transmitted or transcribed without the expressed written permission of the manufacturer and authors of this manual.

If you do not properly set the motherboard settings, causing the motherboard to malfunction or fail, we cannot guarantee any responsibility.

Page 3 of the Abit IS7-E2V user manual — IS7 Series (IS7-G, IS7, IS7-E, IS7-E2, IS7-E2G,
Page 3 · click to enlarge
Page 3
Page 3 of the Abit IS7-E2V user manual — IS7 Series (IS7-G, IS7, IS7-E, IS7-E2, IS7-E2G,
Page 4 of the Abit IS7-E2V user manual — Appendix A. Install Intel Chipset Software Utility...............................................A-1
Page 4 · click to enlarge
Page 4

3-7. PnP/PCI Configurations 3-22 3-8. PC Health Status 3-24 3-9. Load Fail-Safe Defaults 3-25 3-10. Load Optimized Defaults 3-25 3-11. Set Password 3-25 3-12. Save & Exit Setup 3-25 3-13. Exit Without Saving 3-25

Appendix A. Install Intel Chipset Software Utility A-1

Appendix B. Install Intel Application Accelerator RAID (IS7-G, IS7) ..............B-1

Appendix C. Install Audio Driver.........................................................................C-1

Appendix D. Install LAN Driver...........................................................................D-1

Appendix E. Install Silicon Serial ATA RAID Driver (IS7-G) ...........................E-1

Appendix F. Install VGA Driver (IS7-M) ............................................................F-1

Appendix G. Install USB 2.0 Driver .....................................................................G-1

Appendix H. ABIT EQ (The Hardware Doctor Utility) .......................................H-1

Appendix I. FlashMenu (BIOS Update Utility)................................................... I-1

Appendix J. Troubleshooting (Need Assistance?)................................................J-1

Appendix K. How to Get Technical Support ........................................................K-1

Page 5 of the Abit IS7-E2V user manual — Chapter 1. Introduction
Page 5 · click to enlarge
Page 5

Chapter 1. Introduction

1-1. Features & Specifications

  • 1. CPU
  • Supports Intel Pentium 4 Socket 478 processor with 800MHz, 533MHz, and 400MHz (for Northwood only) System Data Bus
  • Supports Intel Hyper-Threading Technology
  • 2. Chipset
  • Intel 82865PE (MCH) + 82801ER (ICH5R) (IS7-G/IS7)
  • Intel 82865PE (MCH) + 82801EB (ICH5) (IS7-E/IS7-E2/IS7-E2G/IS7-E2V)
  • Intel 82865G (MCH) + 82801EB (ICH5) (IS7-M)
  • Intel 82848P (MCH) + 82801EB (ICH5) (IS7-V2)
  • Supports Hi-Speed Universal Serial Bus (USB 2.0)
  • Supports Ultra ATA/100/66/33 mode
  • Integrated Intel “ Extreme Graphics 2 ” graphics controller (IS7-M)
  • 3. Memory
  • Supports 4 DIMM single/dual channel DDR 400/333/266 (Max. 4GB) (IS7-G/IS7/IS7-E/IS7-M)
  • Supports 2 DIMM single/dual channel DDR 400/333/266 (Max. 2GB) (IS7-E2/IS7-E2G/IS7-E2V)
  • Supports 2 DIMM single channel DDR 400/333/266 (Max. 2GB) (IS7-V2)
4. AGP • Accelerated Graphics Port connector supports AGP 8X/4X Interface (0.8V/1.5V)
  • 5. LAN
  • Onboard 10/100/1000M LAN Controller (IS7-G/IS7-E2G)
  • Onboard 10/100M LAN Controller (IS7/IS7-E/IS7-M/IS7-E2/IS7-V2)
  • 6. Serial ATA RAID
  • Onboard 2 channels of Serial ATA 150MB/s data transfer rate with RAID function (RAID 0/RAID 1) via ICH5R South Bridge (IS7-G/IS7)
  • Onboard 2 channels of Serial ATA 150MB/s data transfer rate with RAID function (RAID 0/RAID 1) via Silicon Image PCI Chip (IS7-G)
  • Onboard 2 channels of Serial ATA 150MB/s data transfer rate via ICH5 South Bridge (IS7-E/IS7-M/IS7-E2/IS7-E2G/IS7-E2V/IS7-V2)
7. USB 2.0 • 8x USB 2.0 ports support 480 Mb/s data transfer rate
8. IEEE 1394 • Supports IEEE 1394a at 400/200/100 Mb/s data transfer rate (IS7-G/IS7)

Introduction 1-1

Page 6 of the Abit IS7-E2V user manual — Chapter 1. Introduction
Page 6 · click to enlarge
Page 6
  • 9. Audio
  • Onboard 6-Channel AC 97 CODEC
  • Professional digital audio interface supports S/PDIF In/Out (IS7-G/IS7/IS7-E)
  • 10. ABIT Engineered
  • ABIT SoftMenu ™ Technology
  • ABIT EQ ™ (IS7-G/IS7/IS7-E/IS7-E2/IS7-M/IS7-V2)
  • ABIT FANEQ ™ (IS7-G/IS7/IS7-E/IS7-M/IS7-E2)
  • ABIT FlashMenu ™
  • 11. Internal I/O Connectors
  • 1x AGP slot
  • 5x PCI slots
  • 1x Floppy port supports up to 2.88MB
  • 2x Ultra ATA/100/66/33 connectors
  • 4x Serial ATA 150 connectors (IS7-G)
  • 2x Serial ATA 150 connectors (IS7/IS7-E/IS7-M/IS7-E2/IS7-E2G/IS7-E2V/IS7-V2)
  • 2x USB 2.0 headers
  • 2x IEEE 1394a headers (IS7-G/IS7)
  • 1x FP-Audio header
  • 1x CD-IN header
  • 1x AUX-IN header (IS7-G/IS7/IS7-E/IS7-M)
  • 1x IrDA header (IS7-G/IS7/IS7-E/IS7-M)
  • 12. Back Panel I/O
  • 1x PS/2 Keyboard, 1x PS/2 mouse
  • 1x Serial port connectors, 1x Parallel port connector
  • 1x S/PDIF In connector (IS7-G/IS7/IS7-E)
  • 1x S/PDIF Out connector (IS7-G/IS7/IS7-E)
  • 1x VGA Out connector (IS7-M)
  • 1x AUDIO1 connector
  • 1x AUDIO2 connector (IS7-G/IS7/IS7-E/IS7-M)
  • 2x USB 2.0, 1x IEEE 1394 Connector (IS7-G/IS7)
  • 2x USB 2.0 Connectors (IS7-E/IS7-M/IS7-E2/IS7-E2G/IS7-E2V/IS7-V2)
  • 2x USB 2.0, 1x RJ-45 LAN Connector
  • 13. Miscellaneous
  • ATX form factor
  • Hardware Monitoring – including Fan Speed, Voltages, CPU and system temperature
  • Supports Wake Up by LAN, Modem Ring, RTC Alarm, Keyboard and Mouse Power On
  • Supports STR (Suspend to RAM)
Page 7 of the Abit IS7-E2V user manual — Chapter 1. Introduction
Page 7 · click to enlarge
Page 7
14. Order Information
Abit IS7-E2V — Chapter 1. Introduction diagram (page 7)
Fig. 1 · Chapter 1. Introduction
ModelChipsetLANSB SATAPCI SATAIEEE 1394 IS7-G865PE + ICH5R10/100/1000MRAID 0/1RAID 0/13 Ports IS7865PE + ICH5R10/100MRAID 0/1-3 Ports IS7-E865PE + ICH510/100M2 Ports-- IS7-E2865PE + ICH510/100M2 Ports-- IS7-E2G865PE + ICH510/100/1000M2 Ports-- IS7-E2V865PE + ICH5-2 Ports-- IS7-M865G + ICH510/100M2 Ports-- IS7-V2848P + ICH510/100M2 Ports--

Specifications and information contained herein are subject to change without notice.

Introduction 1-3

Page 8 of the Abit IS7-E2V user manual — 1-2. Layout Diagram (IS7-G/IS7/IS7-E)
Page 8 · click to enlarge
Page 8

1-2. Layout Diagram (IS7-G/IS7/IS7-E)

Abit IS7-E2V — 1-2. Layout Diagram (IS7-G/IS7/IS7-E) diagram (page 8)
Fig. 2 · 1-2. Layout Diagram (IS7-G/IS7/IS7-E)
Page 9 of the Abit IS7-E2V user manual — 1-3. Layout Diagram (IS7-E2/IS7-E2G/IS7-E2V)
Page 9 · click to enlarge
Page 9

1-3. Layout Diagram (IS7-E2/IS7-E2G/IS7-E2V)

Abit IS7-E2V — 1-3. Layout Diagram (IS7-E2/IS7-E2G/IS7-E2V) diagram (page 9)
Fig. 3 · 1-3. Layout Diagram (IS7-E2/IS7-E2G/IS7-E2V)

Introduction 1-5

Page 10 of the Abit IS7-E2V user manual — 1-4. Layout Diagram (IS7-M)
Page 10 · click to enlarge
Page 10

1-4. Layout Diagram (IS7-M)

Abit IS7-E2V — 1-4. Layout Diagram (IS7-M) diagram (page 10)
Fig. 4 · 1-4. Layout Diagram (IS7-M)
Page 11 of the Abit IS7-E2V user manual — 1-5. Layout Diagram (IS7-V2)
Page 11 · click to enlarge
Page 11

1-5. Layout Diagram (IS7-V2)

Abit IS7-E2V — 1-5. Layout Diagram (IS7-V2) diagram (page 11)
Fig. 5 · 1-5. Layout Diagram (IS7-V2)

Introduction 1-7

Page 12 of the Abit IS7-E2V user manual — 1-5. Layout Diagram (IS7-V2)
Page 12 · click to enlarge
Page 12

1-8 Chapter 1 1-8 Chapter 1

Abit IS7-E2V — 1-5. Layout Diagram (IS7-V2) diagram (page 12)
Fig. 6 · 1-5. Layout Diagram (IS7-V2)
Page 13 of the Abit IS7-E2V user manual — 2-1. Install The Motherboard
Page 13 · click to enlarge
Page 13

Chapter 2. Hardware Setup

Before the Installation: Turn off the power supply switch (fully turn off the +5V standby power), or disconnect the power cord before installing or unplugging any connectors or add-on cards. Failing to do so may cause the motherboard components or add-on cards to malfunction or damaged.

2-1. Install The Motherboard

Most computer chassis have a base with many mounting holes to allow motherboard to be securely attached on and at the same time, prevented from short circuits. There are two ways to attach the motherboard to the chassis base:

1. use with studs 2. or use with spacers
Abit IS7-E2V — 2-1. Install The Motherboard diagram (page 13)
Fig. 7 · 2-1. Install The Motherboard

In principle, the best way to attach the board is to use with studs. Only if you are unable to do this should you attach the board with spacers. Line up the holes on the board with the mounting holes on the chassis. If the holes line up and there are screw holes, you can attach the board with studs. If the holes line up and there are only slots, you can only attach with spacers. Take the tip of the spacers and insert them into the slots. After doing this to all the slots, you can slide the board into position aligned with slots. After the board has been positioned, check to make sure everything is OK before putting the chassis back on.

Abit IS7-E2V — 2-1. Install The Motherboard diagram (page 13)
Fig. 8 · 2-1. Install The Motherboard

Hardware Setup 2-1

Page 14 of the Abit IS7-E2V user manual — 2-2. Install Pentium ® 4 CPU and Heatsink Supporting-Base
Page 14 · click to enlarge
Page 14

2-2. Install Pentium ® 4 CPU and Heatsink Supporting-Base

This motherboard provides a ZIF (Zero Insertion Force) Socket 478 to install Intel® Pentium® 4 CPU. The CPU you bought should have a kit of heatsink and cooling fan along with. If that’s not the case, buy one specially designed for Pentium® 4 Socket 478.

Abit IS7-E2V — 2-2. Install Pentium ® 4 CPU and Heatsink Supporting-Base diagram (page 14)
Fig. 9 · 2-2. Install Pentium ® 4 CPU and Heatsink Supporting…
1. Locate the 478-pin ZIF socket on the motherboard. Fasten the Retention Module Base onto the motherboard.
2. Pull the CPU socket lever sideways away from the socket and then upwards to 90 degree. Insert the CPU with the correct orientation. Do not use extra force to insert CPU; it only fits in one orientation. Close down the socket lever while holding down the CPU.
3. Put the heatsink faces down onto the CPU until it completely covers the CPU.
4. Put the Fan and Retention Mechanism Assembly onto the heatsink. Make sure all the four Retention Locks at each side of the Fan and Retention Mechanism Assembly snap into the Retention Holes.
5. Push down the Retention Lock at both sides of the Fan and Retention Mechanism Assembly to lock up together with the Retention Module Base.
6. The Fan and Retention Mechanism Assembly and Retention Module Base should now firmly lock up with each other with the heatsink inside.
Page 15 of the Abit IS7-E2V user manual — IS7-G/IS7/IS7-E: IS7-M:
Page 15 · click to enlarge
Page 15

2-3. Install System Memory

IS7-G/IS7/IS7-E/IS7-M:

This motherboard provides four 184-pin DDR DIMM slots for Single/Dual Channel DDR 400/333/266 memory modules with memory expansion size up to 4GB.

To reach the performance of Dual Channel DDR, the following rules must be obeyed:

  • When installing TWO DIMM modules: Install DIMM modules of the same type and size for slots [DIMM1]+[DIMM3] or slots [DIMM2]+[DIMM4].
  • When installing FOUR DIMM modules: Install DIMM modules of the same type and size for slots [DIMM1]+[DIMM3], and slots [DIMM2]+[DIMM4].

IS7-G/IS7/IS7-E: IS7-M:

Abit IS7-E2V — IS7-G/IS7/IS7-E: IS7-M: diagram (page 15)
Fig. 10
Abit IS7-E2V — IS7-G/IS7/IS7-E: IS7-M: diagram (page 15)
Fig. 11
Abit IS7-E2V — IS7-G/IS7/IS7-E: IS7-M: diagram (page 15)
Fig. 12

Bank Memory Module Total Memory

Bank 0, 1 (DIMM1) 128, 256, 512MB, 1GB 128MB ~ 1GB

Bank 2, 3 (DIMM2) 128, 256, 512MB, 1GB 128MB ~ 1GB

Bank 4, 5 (DIMM3) 128, 256, 512MB, 1GB 128MB ~ 1GB

Bank 6, 7 (DIMM4) 128, 256, 512MB, 1GB 128MB ~ 1GB

Total System Memory 128MB ~ 4GB

Hardware Setup 2-3

Page 16 of the Abit IS7-E2V user manual — IS7-E2/IS7-E2G/IS7-E2V: IS7-V2:
Page 16 · click to enlarge
Page 16

IS7-E2/IS7-E2G/IS7-E2V/IS7-V2:

This motherboard provides 2 184-pin DDR DIMM sites for memory expansion available from minimum 128MB to maximum 2GB.

IS7-E2/IS7-E2G/IS7-E2V: IS7-V2:

Abit IS7-E2V — IS7-E2/IS7-E2G/IS7-E2V: IS7-V2: diagram (page 16)
Fig. 13
Abit IS7-E2V — IS7-E2/IS7-E2G/IS7-E2V: IS7-V2: diagram (page 16)
Fig. 14
Abit IS7-E2V — IS7-E2/IS7-E2G/IS7-E2V: IS7-V2: diagram (page 16)
Fig. 15

Bank Memory Module Total Memory

Bank 0, 1 (DIMM1) 128, 256, 512MB, 1GB 128MB ~ 1GB

Bank 2, 3 (DIMM2) 128, 256, 512MB, 1GB 128MB ~ 1GB

Total System Memory 128MB ~ 2GB

Page 17 of the Abit IS7-E2V user manual —  IS7-E2/IS7-E2G/IS7-E2V/IS7-V2:
Page 17 · click to enlarge
Page 17

Power off the computer and unplug the AC power cord before installing or removing memory modules.

1. Locate the DIMM slot on the board.
Abit IS7-E2V —  IS7-E2/IS7-E2G/IS7-E2V/IS7-V2: diagram (page 17)
Fig. 16
2. Hold two edges of the DIMM module carefully, keep away of touching its connectors.
3. Align the notch key on the module with the rib on the slot.
4. Firmly press the module into the slots until the ejector tabs at both sides of the slot automatically snaps into the mounting notch. Do not force the DIMM module in with extra force as the DIMM module only fit in one direction.
5. To remove the DIMM modules, push the two ejector tabs on the slot outward simultaneously, and then pull out the DIMM module.

Hardware Setup 2-5

Page 18 of the Abit IS7-E2V user manual — IS7-V2:
Page 18 · click to enlarge
Page 18

2-4. Connectors, Headers and Switches

Here we will show you all of the connectors, headers and switches, and how to connect them. Please read the entire section for necessary information before attempting to finish all the hardware installation inside the computer chassis. A complete enlarged layout diagram is shown in Chapter 1 for all the position of connectors and headers on the board that you may refer to.

ATX Power Input Connectors (1).

This motherboard provides two power connectors to connect to an ATX12V power supply with 300W, 20A +5VDC, and 720mA +5VSB capacity at least.

IS7-G/IS7/IS7-E: IS7-M: IS7-E2/IS7-E2G/IS7-E2V:

Abit IS7-E2V — IS7-G/IS7/IS7-E: IS7-M: IS7-E2/IS7-E2G/IS7-E2V: diagram (page 18)
Fig. 17
Abit IS7-E2V — IS7-G/IS7/IS7-E: IS7-M: IS7-E2/IS7-E2G/IS7-E2V: diagram (page 18)
Fig. 18
Abit IS7-E2V — IS7-G/IS7/IS7-E: IS7-M: IS7-E2/IS7-E2G/IS7-E2V: diagram (page 18)
Fig. 19

IS7-V2:

Abit IS7-E2V — IS7-V2: diagram (page 18)
Fig. 20
Abit IS7-E2V — IS7-V2: diagram (page 18)
Fig. 21
Page 19 of the Abit IS7-E2V user manual — IS7-V2:
Page 19 · click to enlarge
Page 19

(2). FAN Power Connectors

These 3-pin connectors each provide power to the cooling fans installed in your system.

The CPU must be kept cool by using a powerful fan with heatsink. The system is capable of monitoring the speed of the CPU fan.

  • CPUFAN1: CPU Fan Power Connector
  • NBFAN1: Chipset Fan Power Connector
  • SYSFAN1: System Fan Power Connector
  • AUXFAN1, AUXFAN2: Auxiliary Fan Power Connector

IS7-G/IS7/IS7-E: IS7-M: IS7-E2/IS7-E2G/IS7-E2V:

Abit IS7-E2V — IS7-G/IS7/IS7-E: IS7-M: IS7-E2/IS7-E2G/IS7-E2V: diagram (page 19)
Fig. 22
Abit IS7-E2V — IS7-G/IS7/IS7-E: IS7-M: IS7-E2/IS7-E2G/IS7-E2V: diagram (page 19)
Fig. 23
Abit IS7-E2V — IS7-G/IS7/IS7-E: IS7-M: IS7-E2/IS7-E2G/IS7-E2V: diagram (page 19)
Fig. 24

IS7-V2:

Abit IS7-E2V — IS7-V2: diagram (page 19)
Fig. 25

Hardware Setup 2-7

Page 20 of the Abit IS7-E2V user manual — IS7-M: IS7-E2/IS7-E2G/IS7-E2V: IS7-V2
Page 20 · click to enlarge
Page 20

(3). CMOS Memory Clearing Header

This header uses a jumper cap to clear the CMOS memory.

  • Pin 1-2 shorted (default): Normal operation.
  • Pin 2-3 shorted: Clear CMOS memory.

IS7-G/IS7/IS7-E:

Abit IS7-E2V — IS7-G/IS7/IS7-E: diagram (page 20)
Fig. 26
Abit IS7-E2V — IS7-G/IS7/IS7-E: diagram (page 20)
Fig. 27

IS7-M: IS7-E2/IS7-E2G/IS7-E2V: IS7-V2

Abit IS7-E2V — IS7-M: IS7-E2/IS7-E2G/IS7-E2V: IS7-V2 diagram (page 20)
Fig. 28
Abit IS7-E2V — IS7-M: IS7-E2/IS7-E2G/IS7-E2V: IS7-V2 diagram (page 20)
Fig. 29
Abit IS7-E2V — IS7-M: IS7-E2/IS7-E2G/IS7-E2V: IS7-V2 diagram (page 20)
Fig. 30
Abit IS7-E2V — IS7-M: IS7-E2/IS7-E2G/IS7-E2V: IS7-V2 diagram (page 20)
Fig. 31
Page 21 of the Abit IS7-E2V user manual — IS7-E2/IS7-E2G/IS7-E2V: IS7-V2
Page 21 · click to enlarge
Page 21

(4). Wake-up Header

These headers use a jumper cap to enable/disable the wake-up function.

  • PS2-PWR1: Pin 1-2 shorted (default): Disable wake-up function support at Keyboard/Mouse port. Pin 2-3 shorted: Enable wake-up function support at Keyboard/Mouse port
  • USB-PWR1: Pin 1-2 shorted (default): Disable wake-up function support at USB1 port. Pin 2-3 shorted: Enable wake-up function support at USB1 port.
  • USB-PWR2: Pin 1-2 shorted (default): Disable wake-up function support at USB2 port. Pin 2-3 shorted: Enable wake-up function support at USB2 port

IS7-G/IS7/IS7-E:

Abit IS7-E2V — IS7-G/IS7/IS7-E: diagram (page 21)
Fig. 32
Abit IS7-E2V — IS7-G/IS7/IS7-E: diagram (page 21)
Fig. 33

IS7-E2/IS7-E2G/IS7-E2V: IS7-V2

Abit IS7-E2V — IS7-E2/IS7-E2G/IS7-E2V: IS7-V2 diagram (page 21)
Fig. 34
Abit IS7-E2V — IS7-E2/IS7-E2G/IS7-E2V: IS7-V2 diagram (page 21)
Fig. 35
Abit IS7-E2V — IS7-E2/IS7-E2G/IS7-E2V: IS7-V2 diagram (page 21)
Fig. 36

Hardware Setup 2-9

Page 22 of the Abit IS7-E2V user manual — IS7-G/IS7/IS7-E: IS7-M:
Page 22 · click to enlarge
Page 22

(5). Front Panel Audio Connection Header

This header provides the connection to audio connector at front panel.

  • To use the audio connector at front panel, remove all the jumpers on this header, and then connect to front panel by the extension cable provided with the chassis.
  • To use the audio connector at rear panel, disconnect the extension cable, attach the jumpers back at pin 5-6, and pin 9-10 (default setting).

IS7-G/IS7/IS7-E: IS7-M:

Abit IS7-E2V — IS7-G/IS7/IS7-E: IS7-M: diagram (page 22)
Fig. 37
Abit IS7-E2V — IS7-G/IS7/IS7-E: IS7-M: diagram (page 22)
Fig. 38

Pin Pin Assignment Pin Pin Assignment 1 Audio Mic. 2 Ground 3 Audio Mic. Bias 4 VCC

5 Speaker Out Right Channel 6 Speaker Out Right Channel Return 7 X 8 NC

9 Speaker Out Left Channel 10 Speaker Out Left Channel Return 11 Ground 12 S/PDIF In

13 VCC 14 S/PDIF Out

Page 23 of the Abit IS7-E2V user manual — IS7-E2/IS7-E2G/IS7-E2V: IS7-V2
Page 23 · click to enlarge
Page 23

IS7-E2/IS7-E2G/IS7-E2V: IS7-V2

Abit IS7-E2V — IS7-E2/IS7-E2G/IS7-E2V: IS7-V2 diagram (page 23)
Fig. 39
Abit IS7-E2V — IS7-E2/IS7-E2G/IS7-E2V: IS7-V2 diagram (page 23)
Fig. 40

Pin Pin Assignment Pin Pin Assignment 1 Audio Mic. 2 Ground 3 Audio Mic. Bias 4 VCC

5 Speaker Out Right Channel 6 Speaker Out Right Channel Return 7 X 8 NC

9 Speaker Out Left Channel 10 Speaker Out Left Channel Return

Hardware Setup 2-11

Page 24 of the Abit IS7-E2V user manual — IS7-V2:
Page 24 · click to enlarge
Page 24

(6). Front Panel Switches & Indicators Headers

This header is used for connecting switches and LED indicators on the chassis front panel.

Watch the power LED pin position and orientation. The mark “+” align to the pin in the figure below stands for positive polarity for the LED connection. Please pay attention to connect these headers. A wrong orientation will only cause the LED not lighting, but a wrong connection of the switches could cause system malfunction.

IS7-G/IS7/IS7-E: IS7-M: IS7-E2/IS7-E2G/IS7-E2V:

Abit IS7-E2V — IS7-G/IS7/IS7-E: IS7-M: IS7-E2/IS7-E2G/IS7-E2V: diagram (page 24)
Fig. 41
Abit IS7-E2V — IS7-G/IS7/IS7-E: IS7-M: IS7-E2/IS7-E2G/IS7-E2V: diagram (page 24)
Fig. 42
Abit IS7-E2V — IS7-G/IS7/IS7-E: IS7-M: IS7-E2/IS7-E2G/IS7-E2V: diagram (page 24)
Fig. 43

IS7-V2:

Abit IS7-E2V — IS7-V2: diagram (page 24)
Fig. 44
Page 25 of the Abit IS7-E2V user manual — IS7-E2/IS7-E2G/IS7-E2V: IS7-V2
Page 25 · click to enlarge
Page 25
  • HLED (Pin 1, 3): Connects to the HDD LED cable of chassis front panel.
Abit IS7-E2V — IS7-E2/IS7-E2G/IS7-E2V: IS7-V2 diagram (page 25)
Fig. 45
  • RST (Pin 5, 7): Connects to the Reset Switch cable of chassis front panel.
  • SPK (Pin 15, 17, 19, 21): Connects to the System Speaker cable of chassis.
  • SLED (Pin 2, 4): Connects to the Suspend LED cable (if there is one) of chassis front panel.
  • PWR-ON (Pin 6, 8): Connects to the Power Switch cable of chassis front panel.
  • PLED (Pin 16, 18, 20): Connects to the Power LED cable of chassis front panel.

Hardware Setup 2-13

Page 26 of the Abit IS7-E2V user manual — IS7-M:
Page 26 · click to enlarge
Page 26

(7). Infrared Device Header

This header connects to an optional IR device attached to chassis. This motherboard supports standard IR transfer rates.

IS7-G/IS7/IS7-E:

Abit IS7-E2V — IS7-G/IS7/IS7-E: diagram (page 26)
Fig. 46
Abit IS7-E2V — IS7-G/IS7/IS7-E: diagram (page 26)
Fig. 47

IS7-M:

Abit IS7-E2V — IS7-M: diagram (page 26)
Fig. 48
Abit IS7-E2V — IS7-M: diagram (page 26)
Fig. 49
Page 27 of the Abit IS7-E2V user manual — 1 TPA0 + 2 TPA0 -
Page 27 · click to enlarge
Page 27

(8). Additional IEEE1394 Port Headers

These headers each provide one additional IEEE1394 port connection through an extension cable and bracket.

IS7-G/IS7:

Abit IS7-E2V — IS7-G/IS7: diagram (page 27)
Fig. 50

Pin Pin Assignment Pin Pin Assignment

1 TPA0 + 2 TPA0 -

3 GND 4 GND

5 TPB0 + 6 TPB0 -

7 +12V 8 +12V

9 NC 10 GND

Hardware Setup 2-15

Page 28 of the Abit IS7-E2V user manual — IS7-V2:
Page 28 · click to enlarge
Page 28

(9). Additional USB Port Headers

These headers each provide 2 additional USB 2.0 ports connection through an USB cable designed for USB 2.0 specifications.

IS7-G/IS7/IS7-E: IS7-M: IS7-E2/IS7-E2G/IS7-E2V:

Abit IS7-E2V — IS7-G/IS7/IS7-E: IS7-M: IS7-E2/IS7-E2G/IS7-E2V: diagram (page 28)
Fig. 51

IS7-V2:

Abit IS7-E2V — IS7-V2: diagram (page 28)
Fig. 52
Page 29 of the Abit IS7-E2V user manual — IS7-M: IS7-E2/IS7-E2G/IS7-E2V: IS7-V2:
Page 29 · click to enlarge
Page 29

(10). System Management Bus Headers

This header is reserved for system management bus (SM bus). The SM bus is a specific implementation of an I2C bus. I2C is a multi-master bus, which means that multiple chips can be connected to the same bus and each one can act as a master by initiating a data transfer. If more than one master simultaneously tries to control the bus, an arbitration procedure decides which master gets priority.

IS7-G/IS7/IS7-E:

Abit IS7-E2V — IS7-G/IS7/IS7-E: diagram (page 29)
Fig. 53
Abit IS7-E2V — IS7-G/IS7/IS7-E: diagram (page 29)
Fig. 54

IS7-M: IS7-E2/IS7-E2G/IS7-E2V: IS7-V2:

Abit IS7-E2V — IS7-M: IS7-E2/IS7-E2G/IS7-E2V: IS7-V2: diagram (page 29)
Fig. 55
Abit IS7-E2V — IS7-M: IS7-E2/IS7-E2G/IS7-E2V: IS7-V2: diagram (page 29)
Fig. 56
Abit IS7-E2V — IS7-M: IS7-E2/IS7-E2G/IS7-E2V: IS7-V2: diagram (page 29)
Fig. 57
Abit IS7-E2V — IS7-M: IS7-E2/IS7-E2G/IS7-E2V: IS7-V2: diagram (page 29)
Fig. 58

Hardware Setup 2-17

Page 30 of the Abit IS7-E2V user manual — IS7-M:
Page 30 · click to enlarge
Page 30

(11). Internal Audio Connectors

These connectors connect to the audio output of internal CD-ROM drive or add-on card.

IS7-G/IS7/IS7-E:

Abit IS7-E2V — IS7-G/IS7/IS7-E: diagram (page 30)
Fig. 59
Abit IS7-E2V — IS7-G/IS7/IS7-E: diagram (page 30)
Fig. 60

IS7-M:

Abit IS7-E2V — IS7-M: diagram (page 30)
Fig. 61
Abit IS7-E2V — IS7-M: diagram (page 30)
Fig. 62
Page 31 of the Abit IS7-E2V user manual — IS7-E2/IS7-E2G/IS7-E2V: IS7-V2:
Page 31 · click to enlarge
Page 31

IS7-E2/IS7-E2G/IS7-E2V: IS7-V2:

Abit IS7-E2V — IS7-E2/IS7-E2G/IS7-E2V: IS7-V2: diagram (page 31)
Fig. 63
Abit IS7-E2V — IS7-E2/IS7-E2G/IS7-E2V: IS7-V2: diagram (page 31)
Fig. 64
Abit IS7-E2V — IS7-E2/IS7-E2G/IS7-E2V: IS7-V2: diagram (page 31)
Fig. 65

Hardware Setup 2-19

Page 32 of the Abit IS7-E2V user manual — IS7-V2:
Page 32 · click to enlarge
Page 32

(12). Accelerated Graphics Port Slot

This slot supports an optional AGP graphics card up to AGP 4X/8X mode.

IS7-G/IS7/IS7-E: IS7-M: IS7-E2/IS7-E2G/IS7-E2V:

Abit IS7-E2V — IS7-G/IS7/IS7-E: IS7-M: IS7-E2/IS7-E2G/IS7-E2V: diagram (page 32)
Fig. 66
Abit IS7-E2V — IS7-G/IS7/IS7-E: IS7-M: IS7-E2/IS7-E2G/IS7-E2V: diagram (page 32)
Fig. 67
Abit IS7-E2V — IS7-G/IS7/IS7-E: IS7-M: IS7-E2/IS7-E2G/IS7-E2V: diagram (page 32)
Fig. 68

IS7-V2:

Abit IS7-E2V — IS7-V2: diagram (page 32)
Fig. 69
Abit IS7-E2V — IS7-V2: diagram (page 32)
Fig. 70
Page 33 of the Abit IS7-E2V user manual — IS7-M: IS7-E2/IS7-E2G/IS7-E2V: IS7-V2:
Page 33 · click to enlarge
Page 33

Floppy Disk Drive Connector (13).

This connector supports two standard floppy disk drives via a 34-pin 34-conductor ribbon cable.

Connecting the Floppy Disk Drive Cable:

1. Install one end of the ribbon cable into the FDC1 connector. The colored edge of the ribbon cable should be aligned with pin-1 of FDC1 connector.
2. Install the other end(s) of ribbon cable into the disk drive connector(s). The colored edge of the ribbon cable should be also aligned with pin-1 of disk drive connector. The endmost connector should be attached to the drive designated as Drive A.

IS7-G/IS7/IS7-E:

Abit IS7-E2V — IS7-G/IS7/IS7-E: diagram (page 33)
Fig. 71
Abit IS7-E2V — IS7-G/IS7/IS7-E: diagram (page 33)
Fig. 72

IS7-M/IS7-E2/IS7-E2G/ IS7-E2V/IS7-V2:

Abit IS7-E2V — IS7-M/IS7-E2/IS7-E2G/ IS7-E2V/IS7-V2: diagram (page 33)
Fig. 73

IS7-M: IS7-E2/IS7-E2G/IS7-E2V: IS7-V2:

Abit IS7-E2V — IS7-M: IS7-E2/IS7-E2G/IS7-E2V: IS7-V2: diagram (page 33)
Fig. 74
Abit IS7-E2V — IS7-M: IS7-E2/IS7-E2G/IS7-E2V: IS7-V2: diagram (page 33)
Fig. 75
Abit IS7-E2V — IS7-M: IS7-E2/IS7-E2G/IS7-E2V: IS7-V2: diagram (page 33)
Fig. 76

Hardware Setup 2-21

Page 34 of the Abit IS7-E2V user manual — IS7-V2:
Page 34 · click to enlarge
Page 34

(14). IDE Connectors

IS7-G/IS7/IS7-E: IS7-M: IS7-E2/IS7-E2G/IS7-E2V:

Abit IS7-E2V — IS7-G/IS7/IS7-E: IS7-M: IS7-E2/IS7-E2G/IS7-E2V: diagram (page 34)
Fig. 77
Abit IS7-E2V — IS7-G/IS7/IS7-E: IS7-M: IS7-E2/IS7-E2G/IS7-E2V: diagram (page 34)
Fig. 78
Abit IS7-E2V — IS7-G/IS7/IS7-E: IS7-M: IS7-E2/IS7-E2G/IS7-E2V: diagram (page 34)
Fig. 79

IS7-V2:

Abit IS7-E2V — IS7-V2: diagram (page 34)
Fig. 80
Abit IS7-E2V — IS7-V2: diagram (page 34)
Fig. 81
Abit IS7-E2V — IS7-V2: diagram (page 34)
Fig. 82

This motherboard provides two IDE ports to connect up to four IDE drives at Ultra ATA/100 mode by Ultra ATA/66 ribbon cables. Each cable has 40-pin 80-conductor and three connectors, providing two hard drives connection with motherboard. Connect the single end (blue connector) at the longer length of ribbon cable to the IDE port on motherboard, and the other two ends (gray and black connector) at the shorter length of the ribbon cable to the connectors on hard drives.

If you want to connect two hard drives together through one IDE channel, you must configure the second drive to Slave mode after the first Master drive. Please refer to the drives’ documentation for jumper settings. The first drive connected to IDE1 is usually referred to as “Primary Master”, and the second drive as “Primary Slave”. The first drive connected to IDE2 is referred to as “Secondary Master” and the second drive as “Secondary Slave”.

Keep away from connecting one legacy slow speed drive, like CD-ROM, together with another hard drive on the same IDE channel; this will drop your integral system performance.

Page 35 of the Abit IS7-E2V user manual — IS7-M:
Page 35 · click to enlarge
Page 35

(15). Serial ATA Connectors

These connectors are provided to attach one Serial ATA device at each channel via Serial ATA cable.

IS7-G/IS7/IS7-E(SATA3 and SATA4 are for IS7-G only)
Abit IS7-E2V — IS7-M/IS7-E2/IS7-E2G/ IS7-E2V/IS7-V2: diagram (page 35)
Fig. 83
Abit IS7-E2V — IS7-M/IS7-E2/IS7-E2G/ IS7-E2V/IS7-V2: diagram (page 35)
Fig. 84

IS7-M:

Abit IS7-E2V — IS7-M: diagram (page 35)
Fig. 85

Hardware Setup 2-23

Page 36 of the Abit IS7-E2V user manual — IS7-E2/IS7-E2G/IS7-E2V: IS7-V2:
Page 36 · click to enlarge
Page 36

IS7-E2/IS7-E2G/IS7-E2V: IS7-V2:

Abit IS7-E2V — IS7-E2/IS7-E2G/IS7-E2V: IS7-V2: diagram (page 36)
Fig. 86
Abit IS7-E2V — IS7-E2/IS7-E2G/IS7-E2V: IS7-V2: diagram (page 36)
Fig. 87

SATA1 and SATA2 are controlled by South Bridge. To enable the SATA1 and SATA2 controller, you have to enable the item “OnChip Serial ATA” first in the BIOS menu of “OnChip IDE Device”.

The following table displays the quantity of devices at IDE1, IDE2, SATA1 and SATA2 channel under different “OnChip Serial ATA” configuration:

WinXP / Windows .NET Server:

OnChip Serial ATA / OnChip Serial ATA Mode IDE1 IDE2 SATA1 SATA2

Enhanced Mode / IDE 2 2 1 1

DOS / Win2K / Win98 / WinME:

Abit IS7-E2V — IS7-E2/IS7-E2G/IS7-E2V: IS7-V2: diagram (page 36)
Fig. 88

OnChip Serial ATA / OnChip Serial ATA Mode IDE1 IDE2 SATA1 SATA2

For IS7-G: SATA3 and SATA4 are controlled by Silicon Image PCI Chip. To enable the SATA3 and SATA4 controller, you have to enable the item “Serial ATA Controller” first in the BIOS menu of “Onboard PCI Device”.

For more information on how to configure the function mode for SATA1 and SATA2, please refer to the item “Serial ATA 1 Mode” and “Serial ATA 2 Mode” in the BIOS menu of “OnChip IDE Device”.

Page 37 of the Abit IS7-E2V user manual — IS7-M:
Page 37 · click to enlarge
Page 37

(16). Status Indicator

  • 5VSB: This LED lights up when the power supply is connected with power source.
  • VCC: This LED lights up when the system power is on.

IS7-G/IS7/IS7-E:

Abit IS7-E2V — IS7-G/IS7/IS7-E: diagram (page 37)
Fig. 89
Abit IS7-E2V — IS7-G/IS7/IS7-E: diagram (page 37)
Fig. 90

IS7-M:

Abit IS7-E2V — IS7-M: diagram (page 37)
Fig. 91

Hardware Setup 2-25

Page 38 of the Abit IS7-E2V user manual — IS7-E2/IS7-E2G/IS7-E2V: IS7-V2:
Page 38 · click to enlarge
Page 38

IS7-E2/IS7-E2G/IS7-E2V: IS7-V2:

Abit IS7-E2V — IS7-E2/IS7-E2G/IS7-E2V: IS7-V2: diagram (page 38)
Fig. 92
Abit IS7-E2V — IS7-E2/IS7-E2G/IS7-E2V: IS7-V2: diagram (page 38)
Fig. 93
Page 39 of the Abit IS7-E2V user manual — IS7-E2V:
Page 39 · click to enlarge
Page 39

(17). Back Panel Connectors

IS7-G/IS7/IS7-E:

Abit IS7-E2V — IS7-G/IS7/IS7-E: diagram (page 39)
Fig. 94

IS7-M:

Abit IS7-E2V — IS7-M: diagram (page 39)
Fig. 95

IS7-E2/IS7-E2G/IS7-V2:

Abit IS7-E2V — IS7-E2/IS7-E2G/IS7-V2: diagram (page 39)
Fig. 96

IS7-E2V:

Abit IS7-E2V — IS7-E2V: diagram (page 39)
Fig. 97

Hardware Setup 2-27

Page 40 of the Abit IS7-E2V user manual — IS7-E2/IS7-E2G/IS7-V2:
Page 40 · click to enlarge
Page 40
  • Mouse: Connects to PS/2 mouse.
  • Keyboard: Connects to PS/2 keyboard.
  • LPT1: Connects to printer or other devices that support this communication protocol.
  • COM1: Connects to external modem, mouse or other devices that support this communication protocol.
  • OPT1: This connector provides an S/PDIF-In connection through optical fiber to digital multimedia devices. (IS7-G/IS7/IS7-E)
  • OPT2: This connector provides an S/PDIF-Out connection through optical fiber to digital multimedia devices. (IS7-G/IS7/IS7-E)
  • VGA1: Connects to monitor input. (IS7-M)
  • AUDIO1: (IS7-G/IS7/IS7-E/IS7-M)

R.L./R.R. (Rear Left / Rear Right): Connects to the rear left and rear right channel in the 5.1 channel audio system.

Cen./Sub. (Center / Subwoofer): Connects to the center and subwoofer channel in the 5.1 channel audio system.

  • AUDIO1: (IS7-E2/IS7-V2)

Mic In: Connects to the plug from external microphone.

Line In: Connects to the line out from external audio sources.

F.L./F.R. (Front Left / Front Right): Connects to the front left and front right channel in the 5.1-channel or regular 2-channel audio system.

  • AUDIO2: (IS7-G/IS7/IS7-E/IS7-M)

Mic In: Connects to the plug from external microphone.

Line In: Connects to the line out from external audio sources.

F.L./F.R. (Front Left / Front Right): Connects to the front left and front right channel in the 5.1-channel or regular 2-channel audio system.

  • IEEE1394: Connects to devices of IEEE1394 protocol. (IS7-G/IS7)
  • LAN: Connects to Local Area Network. (IS7-G/IS7/IS7-E/IS7-E2/IS7-E2G/IS7-M/IS7-V2)
  • USB1/USB2: Connects to USB devices such as scanner, digital speakers, monitor, mouse, keyboard, hub, digital camera, joystick etc.
Page 41 of the Abit IS7-E2V user manual — PRESS DEL TO ENTER SETUP
Page 41 · click to enlarge
Page 41

Chapter 3. BIOS Setup

This motherboard provides a programmable EEPROM that you can update the BIOS utility. The BIOS (Basic Input/Output System) is a program that deals with the basic level of communication between processor and peripherals. Use the BIOS Setup program only when installing motherboard, reconfiguring system, or prompted to “Run Setup”. This chapter explains the Setup Utility of BIOS utility.

After powering up the system, the BIOS message appears on the screen, the memory count begins, and then the following message appears on the screen:

PRESS DEL TO ENTER SETUP

If this message disappears before you respond, restart the system by pressing + + keys, or by pressing the Reset button on computer chassis. Only when it failed by these two methods can you restart the system by powering it off and then back on.

After pressing key, the main menu screen appears.

Abit IS7-E2V — PRESS DEL TO ENTER SETUP diagram (page 41)
Fig. 98

BIOS Setup 3-1

Page 42 of the Abit IS7-E2V user manual — 3-1. SoftMenu Setup
Page 42 · click to enlarge
Page 42

3-1. SoftMenu Setup

The SoftMenu utility is ABIT’s exclusive and ultimate solution in programming the CPU operating speed. All the parameters regarding CPU FSB speed, multiplier factor, the AGP & PCI clock, and even the CPU core voltage are all available at your fingertips.

Abit IS7-E2V — 3-1. SoftMenu Setup diagram (page 42)
Fig. 99 · 3-1. SoftMenu Setup

Brand Name:

This item displays the CPU model name, for example: Intel Pentium (R) 4.

Frequency:

This item displays the processor speed.

Cache Size:

This item displays the L2 cache size of your CPU.

CPU Operating Speed:

This item displays the CPU operating speed according to the type and speed of your CPU. You can also select the [User Define] option to enter the manual option.

User Define:

WARNING: The wrong settings of the multiplier and external clock in certain circumstances may cause CPU damage. Setting the working frequency higher than the PCI chipset or processor specs, may cause abnormal memory module functioning, system hangs, hard disk drive data lose, abnormal functioning of the VGA card, or abnormal functioning with other add-on cards. Using non-specification settings for your CPU is not the intention of this explanation. These should be used for engineering testing, not for normal applications.

There will be no guaranty for the settings beyond specification, any damage of any component on this motherboard or peripherals result therein is not our responsibility.

Ext. Clock (CPU/AGP/PCI):

This item selects the external clock frequency.

Page 43 of the Abit IS7-E2V user manual — 3-1. SoftMenu Setup
Page 43 · click to enlarge
Page 43

Multiplier Factor:

This item selects the multiplier factors for your CPU if it is not locked.

Estimated new CPU clock:

This item displays the frequency sum up from the previous item [Ext. Clock] and [Multiplier Factor].

N/B Strap CPU As:

This item sets the external hardware reset strap assigned to MCH (Memory Controller Hub). The options are: [PSB400], [PSB533], [PSB800], and [By CPU]. The default setting is By CPU.

To set this option manually:

  • Select [PSB400] for CPU of 100MHz FSB frequency.
  • Select [PSB533] for CPU of 133MHz FSB frequency.
  • Select [PSB800] for CPU of 200MHz FSB frequency.

DRAM Ratio (CPU:DRAM):

This item determines the frequency ratio between CPU and DRAM.

AGP Ratio (CPU:AGP:PCI): (For IS7-G, IS7, IS7-E, and IS7-M only)

This item determines the ratio among CPU, AGP, and PCI.

Fixed AGP/PCI Frequency:

This item determines the AGP/PCI bus frequency. This option allows you to keep your AGP/PCI clock at some fixed frequency to improve system stability.

CPU Power Supply:

This option allows you to switch between CPU default and user-defined voltages. Leave this setting to default unless the current CPU type and voltage setting cannot be detected or is not correct. The option “User Define” enables you to select the Core Voltage manually.

CPU Core Voltage:

This item selects the CPU core voltage.

DDR SDRAM Voltage:

This item selects the voltage for DRAM slot.

AGP Voltage:

This item selects the voltage for AGP slot.

BIOS Setup 3-3

Page 44 of the Abit IS7-E2V user manual — 3-2. Standard CMOS Features
Page 44 · click to enlarge
Page 44

3-2. Standard CMOS Features

This section contains the basic configuration parameters of the BIOS. These parameters include date, hour, VGA card, FDD, and HDD settings.

Abit IS7-E2V — 3-2. Standard CMOS Features diagram (page 44)
Fig. 100 · 3-2. Standard CMOS Features

Date (mm:dd:yy):

This item sets the date you specify (usually the current date) in the format of [Month], [Date], and [Year].

Time (hh:mm:ss):

This item sets the time you specify (usually the current time) in the format of [Hour], [Minute], and [Second].

IDE Channel 1 Master/Slave, IDE Channel 2 Master/Slave, IDE Channel 3

Master, IDE Channel 4 Master:

Click key to enter its submenu:

Abit IS7-E2V — 3-2. Standard CMOS Features diagram (page 44)
Fig. 101 · 3-2. Standard CMOS Features
Page 45 of the Abit IS7-E2V user manual — 3-2. Standard CMOS Features
Page 45 · click to enlarge
Page 45

IDE HDD Auto-Detection:

This item allows you to detect the parameters of IDE drives by pressing key. The parameters will be shown on the screen automatically.

IDE Channel 1 Master/Slave, IDE Channel 2 Master/Slave, Extended IDE Drive:

When set to [Auto], the BIOS will automatically check what kind of IDE drive you are using. If you want to define your own drive by yourself, set it to [Manual] and make sure you fully understand the meaning of the parameters. Please refer to the instruction manual provided by the device’s manufacturer to get the setting right.

Access Mode:

This item selects the mode to access your IDE devices. Leave this item to its default [Auto] setting to detect the access mode of your HDD automatically.

Capacity:

This item displays the approximate capacity of the disk drive. Usually the size is slightly greater than the size of a formatted disk given by a disk-checking program.

Cylinder:

This item configures the numbers of cylinders.

Head:

This item configures the numbers of read/write heads.

Precomp:

This item displays the number of cylinders at which to change the write timing.

Landing Zone:

This item displays the number of cylinders specified as the landing zone for the read/write heads.

Sector:

This item configures the numbers of sectors per track.

Back to Standard CMOS Features Setup Menu:

Drive A & Drive B:

This item sets the type of floppy drives (usually only Drive A) installed.

Floppy 3 Mode Support:

This item allows you to use “3 Mode Floppy Drive” in Japanese computer system by selecting drive A, B, or both. Leave this item to its default [Disabled] setting if you are not using this Japanese standard floppy drive.

Video(For IS7-G, IS7, IS7-E, and IS7-M only)

This item selects the type of video adapter used for the primary system monitor.

BIOS Setup 3-5

Page 46 of the Abit IS7-E2V user manual — 3-2. Standard CMOS Features
Page 46 · click to enlarge
Page 46

[EGA/VGA]: (Enhanced Graphics Adapter/Video Graphics Array) For EGA, VGA, SVGA and PGA monitor adapters.

[CGA 40]: (Color Graphics Adapter) Power up in 40-column mode.

[CGA 80]: (Color Graphics Adapter) Power up in 80-column mode.

[Mono]: (Monochrome adapter) Includes high-resolution monochrome adapters.

Halt On:

This item determines whether the system stops if an error is detected during system boot-up.

[All Errors]: The system-boot will stop whenever the BIOS detect a non-fatal error.

[No Errors]: The system-boot will not stop for any error detected.

[All, But Keyboard]: The system-boot will stop for all errors except a keyboard error.

[All, But Diskette]: The system-boot will stop for all errors except a diskette error.

[All, But Disk/Key]: The system-boot will stop for all errors except a diskette or keyboard error.

Base Memory:

This item displays the amount of base memory installed in the system. The value of the base memory is typically 640K for system with 640K or more memory size installed on the motherboard.

Extended Memory:

This item displays the amount of extended memory detected during system boot-up.

Total Memory:

This item displays the total memory available in the system.

Page 47 of the Abit IS7-E2V user manual — 3-3. Advanced BIOS Features
Page 47 · click to enlarge
Page 47

3-3. Advanced BIOS Features

Abit IS7-E2V — 3-3. Advanced BIOS Features diagram (page 47)
Fig. 102 · 3-3. Advanced BIOS Features

This item is used to enable the functionality of the processor with Hyper-Threading Technology and will appear only when using such processor.

The Hyper-Threading Technology helps your PC work more efficiently by maximizing processor resources and enabling a single processor to run two separate threads of software simultaneously, bringing forth greater performance and system responsiveness when running multiple applications at once.

Quick Power On Self Test:

When set to [Enabled], this item speeds up the Power On Self Test (POST) after powering on the system. The BIOS shorten or skip some check during the POST.

Hard Disk Boot Priority:

This item selects the hard disks booting priority. By pressing key, you can enter its submenu where the hard disks detected can be selected for the booting sequence to boot up system.

This item functions only when there is the option of [Hard Disk] in any one of the First/Second/Third Boot Device items.

Bootable Add-in Device(For IS7-G and IS7 only)

This item allows you to select the add-in device among the [PCI Slot Device], [OnChip SATA], and [Onboard SATA] channel to serve as the bootable device listed in the item “Hard Disk Boot Priority”.

HDD Change Message:

When set to [Enabled], a pop-up message will be displayed on the screen during the POST process if the hard drives installed in your system had been changed.

BIOS Setup 3-7 · Hyper-Threading Technology

Page 48 of the Abit IS7-E2V user manual — 3-3. Advanced BIOS Features
Page 48 · click to enlarge
Page 48

First Boot Device / Second Boot Device / Third Boot Device / Boot Other Device:

Select the drive to boot first, second and third in the [First Boot Device], [Second Boot Device], and [Third Boot Device] items respectively. The BIOS will boot the operating system according to the sequence of the drive selected. Set [Boot Other Device] to [Enabled] if you wish to boot from another device other than these three items.

CPU L3 Cache:

This item is used to enable the L3 cache (default setting), and appears only for certain CPU (Intel Pentium 4 processor with HT Technology Extreme Edition) that possesses L3 cache.

Swap Floppy Drive:

When set to [Enabled], and the system is booting from the floppy drive, the system will boot from drive B instead of the regular drive A. There must be two floppy drives connected in the system to use this function.

Boot Up Floppy Seek:

When set to [Enabled], the BIOS will check whether the floppy disk drive is installed or not.

Boot Up NumLock Status:

This item determines the default state of the numeric keypad at system booting up.

[On]: The numeric keypad functions as number keys.

[Off]: The numeric keypad functions as arrow keys.

Security Option:

This item determines when the system will prompt for password - every time the system boots or only when enters the BIOS setup.

[Setup]: The password is required only when accessing the BIOS Setup.

[System]: The password is required each time the computer boots up.

APIC Mode(For IS7-G, IS7, IS7-E, and IS7-M only)

Leave this item to its default setting.

MPS Version Ctrl For OS:

This item specifies which version of MPS (Multi-Processor Specification) this motherboard will use. Leave this item to its default setting.

OS Select For DRAM > 64MB: (For IS7-G, IS7, IS7-E, and IS7-M only)

This item allows you to access the memory that is over 64MB in OS/2. Leave this item to its default [Non-OS2] setting for operating system other than OS/2.

Page 49 of the Abit IS7-E2V user manual — 3-3. Advanced BIOS Features
Page 49 · click to enlarge
Page 49

Report No FDD For OS:

When set to [Yes], this item allows you to run some older operating system without floppy disk drive. Leave this item to its default setting.

Delay IDE Initial (Secs):

This item allows the BIOS to support some old or special IDE devices by prolonging this delay time. A larger value will give more delay time to the device for which to initialize and to prepare for activation.

Intel OnScreen Branding:

This item determines whether to display the “Intel Inside” logo or not at system boots up.

Disable Unused PCI Clock:

This option disables the clock of PCI slot that is not in use.

[Yes]: The system automatically detect the unused DIMM and PCI slots, and stop sending clock signal to these unused PCI slots.

[No]: The system always send clock signal to all PCI slots.

BIOS Setup 3-9

Page 50 of the Abit IS7-E2V user manual — 3-4. Advanced Chipset Features
Page 50 · click to enlarge
Page 50

3-4. Advanced Chipset Features

Abit IS7-E2V — 3-4. Advanced Chipset Features diagram (page 50)
Fig. 103 · 3-4. Advanced Chipset Features

DRAM Timing Selectable:

This item sets the optimal timings for the following four items, depending on the memory module you are using. The default setting “By SPD” configures these four items by reading the contents in the SPD (Serial Presence Detect) device. The EEPROM on the memory module stores critical parameter information about the module, such as memory type, size, speed, voltage interface, and module banks.

CAS Latency Time:

This item controls the latency between the DRAM read command and the time that the data becomes actually available.

Act to Precharge Delay:

This item controls the number of DRAM clocks used for the DRAM parameters.

DRAM RAS# to CAS# Delay

This item controls the latency between the DRAM active command and the read/write command.

DRAM RAS# Precharge:

This item controls the idle clocks after issuing a precharge command to the DRAM.

System BIOS Cacheable(For IS7-G, IS7, IS7-E, and IS7-M only)

When set to [Enabled], accesses to the system BIOS ROM addressed at F0000H-FFFFFH are cached, provided that the cache controller is enabled. The larger the range of the Cache RAM, the higher the efficiency of the system will be.

Video BIOS Cacheable:

As with caching the system BIOS, enabling the Video BIOS cache will allow access to video BIOS addressed at C0000H to C7FFFH to be cached, if the cache controller is also enabled. The larger the range of the Cache RAM, the faster the video performance will be.

Page 51 of the Abit IS7-E2V user manual — 3-4. Advanced Chipset Features
Page 51 · click to enlarge
Page 51

Memory Hole At 15M-16M:

When set to [Enabled], the memory address space at 15M-16M will be reserved for ISA expansion cards that specifically requires this setting. This makes the memory from 15MB and up unavailable to the system. Leave this item to its default setting.

Delay Prior to Thermal:

This item selects the delay time before thermal activation.

AGP Aperture Size:

This option specifies the amount of system memory that can be used by the AGP device. The aperture is a portion of the PCI memory address range dedicated for graphics memory address space.

Init Display First:

This item selects to initialize AGP or PCI Slot first when the system boots.

[AGP]: When the system boots, it will first initialize AGP.

[PCI Slot]: When the system boots, it will first initialize PCI.

AGP Data Rate Capability:

This item selects the data transfer rate of AGP device. A higher rate delivers faster and better graphics to your system. Make sure your graphics card supports the mode you select.

Game Accelerator(For IS7-G and IS7 only)

This item selects the mode for Game Accelerator among the options of [Auto], [Turbo], [Street Racer], and [F1].

Refresh Cycle Time:

This item determines the DRAM Refresh Cycle among [Auto], [Normal], [Enhanced], [Strengthened], and [Aggressive].

Read Delay (tRD):

This item determines the timing of DRAM Read Delay.

Read delay Adjust(tRDA):

This item determines to adjust the timing of DRAM Read Delay.

Command Per Clock(CPC):

This item determines the address command timing according to the DRAM strobe clock.

On-Chip VGA(For IS7-M only)

This option enables or disables the on-chip VGA controller.

On-Chip Frame Buffer Size(For IS7-M only)

This option selects the size of on-chip frame buffer.

BIOS Setup 3-11

Page 52 of the Abit IS7-E2V user manual — 3-5. Integrated Peripherals
Page 52 · click to enlarge
Page 52

3-5. Integrated Peripherals

Abit IS7-E2V — 3-5. Integrated Peripherals diagram (page 52)
Fig. 104 · 3-5. Integrated Peripherals

OnChip IDE Device:

Click key to enter its submenu:

Abit IS7-E2V — 3-5. Integrated Peripherals diagram (page 52)
Fig. 105 · 3-5. Integrated Peripherals

IDE Bus Master:

This option enables or disables the IDE bus mastering capability under the DOS environment.

OnChip IDE-1 Controller:

This item allows you to enable or disable the primary and secondary IDE controller. Select [Disabled] if you want to add a different hard drive controller.

Master/Slave Drive PIO Mode (For IS7-G, IS7, IS7-E, and IS7-M only)

The PIO (Programmed Input/Output) mode allows the BIOS to tell the controller what it wants and then let the controller and the CPU perform the complete task, rather than having the BIOS issue a series of commands to affect a transfer to or from the disk drive.

[Auto]: The BIOS will select the best available mode after checking your disk drive.

[Mode 0-4]: You can select a mode that matches your disk drive’s timing. Do not use the wrong setting or you will have drive errors.

Page 53 of the Abit IS7-E2V user manual —  SATA RAID ROM:
Page 53 · click to enlarge
Page 53

Master/Slave Drive Ultra DMA (For IS7-G, IS7, IS7-E, and IS7-M only)

This item allows you to set the Ultra DMA in use.

[Auto]: The BIOS will select the best available option after checking your hard drive or CD-ROM.

[Disabled]: The BIOS will not detect these categories. If problem arises in using Ultra DMA devices, try disabling this item.

OnChip IDE-2 Controller:

The description is same as the OnChip IDE-1 Controller.

OnChip Serial ATA Mode(For IS7-G and IS7 only)

This item determines the mode for on-chip Serial ATA.

[IDE]: The on-chip Serial ATA served as IDE Mode.

[RAID]: The on-chip Serial ATA served as RAID Mode.

SATA RAID ROM:

This item allows you to use the boot ROM of on-chip Serial ATA RAID to boot-up system.

OnChip Serial ATA:

This item determines the function for on-chip Serial ATA.

[Disabled]: Disable the Serial ATA controller.

[Auto]: Allows the Serial ATA controller to be arranged by BIOS automatically.

[Combined Mode]: Parallel ATA and Serial ATA are combined together. Supports up to 4 IDE drives.

[Enhanced Mode]: Enable both Parallel ATA and Serial ATA. Supports up to 6 IDE drives.

[SATA Only]: The SATA is operating in legacy mode.

BIOS Setup 3-13

Page 54 of the Abit IS7-E2V user manual — (SATA1)
Page 54 · click to enlarge
Page 54

Serial ATA 1 Mode / Serial ATA 2 Mode:

This item determines the function mode for Serial ATA Port 1 (i.e. The SATA1 connector in this model) and Serial ATA Port 2 (i.e. The SATA2 connector in this model). Both SATA1 and SATA2 will be served each as one single IDE connector after selected as the following modes:

Mode Serial ATA Port 1

Serial ATA Port 2

(SATA1)

  • SATA1 serves as IDE-3 Master
  • SATA2 serves as IDE-4 Master
  • OnChip IDE-1 and IDE-2 controller enabled Enhanced

IDE-3 Master IDE-4 Master

  • SATA1 serves as IDE-4 Master
  • SATA2 serves as IDE-3 Master
  • OnChip IDE-1 and IDE-2 controller enabled

IDE-4 Master IDE-3 Master

  • SATA1 serves as IDE-1 Master
  • SATA2 serves as IDE-1 Slave
  • OnChip IDE-1 controller disabled

IDE-1 Master IDE-1 Slave

  • SATA1 serves as IDE-1 Slave
  • SATA2 serves as IDE-1 Master
  • OnChip IDE-1 controller disabled

IDE-1 Slave IDE-1 Master

  • SATA1 serves as IDE-2 Master
  • SATA2 serves as IDE-2 Slave
  • OnChip IDE-2 controller disabled

IDE-2 Master IDE-2 Slave

  • SATA1 serves as IDE-2 Slave
  • SATA2 serves as IDE-2 Master
  • OnChip IDE-2 controller disabled

IDE-2 Slave IDE-2 Master

  • SATA1 serves as IDE-1 Master
  • SATA2 serves as IDE-2 Master
  • OnChip IDE-1 and IDE-2 controller disabled SATA Only

IDE-1 Master IDE-2 Master

  • SATA1 serves as IDE-2 Master
  • SATA2 serves as IDE-1 Master
  • OnChip IDE-1 and IDE-2 controller disabled

IDE-2 Master IDE-1 Master

(SATA2) Description · Combined

Page 55 of the Abit IS7-E2V user manual — (SATA1)
Page 55 · click to enlarge
Page 55

OnChip PCI Device:

Click key to enter its submenu:

Abit IS7-E2V — (SATA1) diagram (page 55)
Fig. 106

OnChip USB Controller:

This option enables or disables the USB controller.

USB 2.0 Controller:

This option enables or disables the USB 2.0 controller.

USB Keyboard Support Via:

This item allows you to select [BIOS] for using USB keyboard in DOS environment, or [OS] in OS environment.

USB Mouse Support Via:

This item allows you to select [BIOS] for using USB mouse in DOS environment, or [OS] in OS environment.

OnChip Audio Controller:

This option enables or disables the audio controller.

BIOS Setup 3-15

Page 56 of the Abit IS7-E2V user manual — (SATA1)
Page 56 · click to enlarge
Page 56

SuperIO Device:

Click key to enter its submenu:

Abit IS7-E2V — (SATA1) diagram (page 56)
Fig. 107

Onboard FDC Controller:

This option enables or disables the onboard FDC controller.

Onboard Serial Port:

This item determines which I/O addresses the onboard Serial Port controller will access.

[Auto]: The system automatically select an I/O address for the onboard Serial Port.

[3F8/IRQ4, 2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3]: Allows you to manually select an I/O address for the onboard Serial Port.

[Disabled]: Disables the onboard Serial Port.

Onboard IR Port(For IS7-G, IS7, IS7-E, and IS7-M only)

This item determines which I/O addresses the onboard IR Port controller will access.

[Auto]: The system automatically select an I/O address for the onboard IR Port.

[3F8/IRQ4, 2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3]: Allows you to manually select an I/O address for the onboard IR Port.

[Disabled]: Disables the onboard IR Port.

UART Mode Select:

This item selects the Infrared (IR) function mode.

RxD, TxD Active:

This item sets the IR transmission/reception polarity.

IR Transmission Delay:

This option enables or disables the IR transmission delay. When set to [Enabled], the transmission will be slower. This is recommended when transmission problem arise.

Page 57 of the Abit IS7-E2V user manual — (SATA1)
Page 57 · click to enlarge
Page 57

UR2 Duplex Mode:

This item selects the duplex mode required by the IR device connected to the IR port. Full-duplex mode permits simultaneous two-direction transmission. Half-duplex mode permits transmission in one direction only at a time. Refer to your IR KIT user's guide to find out which setting is correct.

Onboard Parallel Port:

This item specifies the I/O address used by the parallel port.

[Disabled]: This option prevents the parallel port from accessing any system resources. When the value of this option is set to [Disabled], the printer port becomes unavailable.

[378/IRQ7]: This option allows the parallel port to use [378/IRQ7] as its I/O port address. The majority of parallel ports on computer systems use IRQ7 and I/O Port 378H as the standard setting.

[278/IRQ5]: This option allows the parallel port to use [278/IRQ5] as its I/O port address.

[3BC/IRQ7]: This option allows the parallel port to use [3BC/IRQ7] as its I/O port address.

Parallel Port Mode:

This item specifies the parallel port mode.

[Normal]: Allows the standard parallel port mode to be used.

[SPP]: (Standard Parallel Port) Allows bi-directional parallel port operation at normal speed.

[EPP]: (Enhanced Parallel Port) Allows bi-directional parallel port operation at maximum speed.

[ECP]: (Extended Capabilities Port) Allows bi-directional parallel port operation at a speed faster than the normal mode’s data transfer rate.

[ECP+EPP]: Allows parallel port operation at ECP and EPP mode.

EPP Mode Select:

This item selects the EPP mode.

ECP Mode Use DMA:

This item selects the DMA channel of the parallel port.

BIOS Setup 3-17

Page 58 of the Abit IS7-E2V user manual —  SATA RAID ROM:
Page 58 · click to enlarge
Page 58

Onboard PCI Device:

Click key to enter its submenu:

Abit IS7-E2V — (SATA1) diagram (page 58)
Fig. 108
IEEE 1394 Controller(For IS7-G and IS7 only)

This option enables or disables the IEEE 1394 controller.

Serial ATA Controller(For IS7-G only)

This option enables or disables the Serial ATA controller of Silicon Image PCI Chip

SATA RAID ROM:

This item allows you to use the boot ROM of on-chip Serial ATA RAID to boot-up system.

Onboard LAN Controller(For IS7-G/IS7/IS7-E/IS7-E2/IS7-E2G/IS7-M/IS7-V2 only)

This option enables or disables the LAN controller.

LAN Boot ROM:

This item allows you to use the boot ROM (instead of a disk drive) to boot-up the system and access the local area network directly.

Enhance Performance:

This option enhances the LAN performance by making it as the first priority among the PCI devices.

Page 59 of the Abit IS7-E2V user manual — 3-6. Power Management Setup
Page 59 · click to enlarge
Page 59

3-6. Power Management Setup

Abit IS7-E2V — 3-6. Power Management Setup diagram (page 59)
Fig. 109 · 3-6. Power Management Setup

ACPI Suspend Type:

This item selects the type of Suspend mode.

[S1(PowerOn Suspend)]: Enables the Power On Suspend function.

[S3(Suspend To RAM)]: Enables the Suspend to RAM function.

Resume by USB From S3:

When set to [Enabled], this item allows you to use a USB device to wake up a system that is in the S3 (STR - Suspend To RAM) state. This item can be configured only if the item “ACPI Suspend Type” is set to [S3(STR)].

Power Button Function:

This item selects the method of powering off your system:

[Delay 4 Sec.]: Pushing the power button for more than 4 seconds will power off the system. This will prevent the system from powering off in case you accidentally hit or pushed the power button.

[Instant-Off]: Pressing and then releasing the power button at once will immediately power off the system.

This item controls the CPU speed by cutting down its regular power to a percentage during the STR (Suspend To RAM) state.

WakeUp by PME# of PCI:

When set to [Enabled], access to the onboard LAN or a PCI card such as a modem or LAN card will cause the system to wake up. The PCI card must support the wake up function.

WakeUp by Onboard Lan(For IS7-G/IS7/IS7-E/IS7-E2/IS7-E2G/IS7-M/IS7-V2 only)

When set to [Enabled], you can remotely wake up a PC in Soft-Off condition via a LAN card that support the wake up function.

BIOS Setup 3-19 · CPU THRM-Throttling

Page 60 of the Abit IS7-E2V user manual — 3-6. Power Management Setup
Page 60 · click to enlarge
Page 60

WakeUp by Alarm:

When set to [Enabled], you can set the date and time you would like the Soft-Off PC to power-on in the “Date (of Month) Alarm” and “Time (hh:mm:ss) Alarm” items. However, if the system is being accessed by incoming calls or the network (Resume On Ring/LAN) prior to the date and time set in these items, the system will give priority to the incoming calls or network instead.

Date (of Month) Alarm

[0]: This option power-on the system everyday according to the time set in the “Time (hh:mm:ss) Alarm” item.

[1-31]: This option selects a date you would like the system to power-on. The system will power-on on the date set, and the time set in the “Time (hh:mm:ss) Alarm” item.

Time (hh:mm:ss) Alarm

This item sets the time you would like the system to power-on.

POWER ON Function:

This item selects the way you want your system to power on.

[Password]: Use a password to power on the system, select this option then press . Enter your password. You can enter up to 5 characters. Type in exactly the same password to confirm, and then press .

[Hot KEY]: Use any of the function keys between to to power on the system.

[Mouse Left]: Double click the mouse left button to power on the system.

[Mouse Right]: Double click the mouse right button to power on the system.

[Any KEY]: Use any keyboard keys to power on the system.

[Button Only]: Use only the power button to power on the system.

[Keyboard 98]: Use the power-on button on the “Keyboard 98” compatible keyboard to power on the system.

KB Power ON Password:

This item sets the password required in order to power on your computer.

Page 61 of the Abit IS7-E2V user manual — 3-6. Power Management Setup
Page 61 · click to enlarge
Page 61

Hot Key Power ON:

This item powers on the system by pressing key plus one of each function key ( ~ ) simultaneously.

Restore On AC Power Loss:

This item selects the system action after an AC power failure.

[Power Off]: When power returns after an AC power failure, the system’s power remains off. You must press the Power button to power-on the system.

[Power On]: When power returns after an AC power failure, the system’s power will be powered on automatically.

[Last State]: When power returns after an AC power failure, the system will return to the state where you left off before power failure occurs. If the system’s power is off when AC power failure occurs, it will remain off when power returns. If the system’s power is on when AC power failure occurs, the system will power-on when power returns.

BIOS Setup 3-21

Page 62 of the Abit IS7-E2V user manual — 3-7. PnP/PCI Configurations
Page 62 · click to enlarge
Page 62

3-7. PnP/PCI Configurations

Abit IS7-E2V — 3-7. PnP/PCI Configurations diagram (page 62)
Fig. 110 · 3-7. PnP/PCI Configurations

Resources Controlled By:

This item configures all of the boot and Plug-and-Play compatible devices.

[Auto]: The system will automatically detect the settings.

[Manual]: Choose the specific IRQ resources in the “IRQ Resources” menu.

IRQ Resources:

Click key to enter its submenu:

This item sets each system interrupt to either [PCI Device] or [Reserved].

Abit IS7-E2V — 3-7. PnP/PCI Configurations diagram (page 62)
Fig. 111 · 3-7. PnP/PCI Configurations

PCI/VGA Palette Snoop:

This item determines whether the MPEG ISA/VESA VGA cards can work with PCI/VGA or not.

[Enabled]: MPEG ISA/VESA VGA cards work with PCI/VGA.

[Disabled]: MPEG ISA/VESA VGA cards do not work with PCI/VGA.

Allocate IRQ To Video(For IS7-G, IS7, IS7-E, and IS7-M only)

This item assigns an IRQ for the VGA card installed.

Page 63 of the Abit IS7-E2V user manual — 3-7. PnP/PCI Configurations
Page 63 · click to enlarge
Page 63

[Enabled]: Automatically assign an IRQ for the VGA card installed.

[Disabled]: The IRQ that was previously occupied by the VGA card will be available for new device.

Allocate IRQ To USB(For IS7-G, IS7, IS7-E, and IS7-M only)

This item assigns an IRQ for the USB device connected.

[Enabled]: Automatically assign an IRQ for the USB device connected.

[Disabled]: The IRQ that was previously occupied by the USB device connected will be available for new device.

PCI Latency Timer(CLK):

This item controls how long each PCI device can hold the bus before another takes over. When set to higher values, every PCI device can conduct transactions for a longer time and thus improve the effective PCI bandwidth. For better PCI performance, you should set the item to higher values.

PIRQ_0 Use IRQ No. ~ PIRQ_7 Use IRQ No.:

This item specifies the IRQ number manually or automatically for the devices installed on PCI slots.

For the relations between the hardware layout of PIRQ (the signals from the ICH chipset), INT# (means PCI slot IRQ signals) and devices, please refer to the table below:

Abit IS7-E2V — 3-7. PnP/PCI Configurations diagram (page 63)
Fig. 112 · 3-7. PnP/PCI Configurations

PIRQ_4 Assignment INT A INT D INT C INT B

PIRQ_5 Assignment INT B INT A INT D INT C

PIRQ_6 Assignment INT C INT B INT A INT D

PIRQ_7 Assignment INT D INT C INT B INT A

  • PCI slot 1 shares IRQ signals with IEEE-1394. (IS7-G, IS7).
  • If you want to install two PCI cards into those PCI slots that share IRQ with one another at the same time, you must make sure that your OS and PCI devices’ driver supports the IRQ sharing function.

BIOS Setup 3-23

Page 64 of the Abit IS7-E2V user manual — 3-8. PC Health Status
Page 64 · click to enlarge
Page 64

3-8. PC Health Status

Abit IS7-E2V — 3-8. PC Health Status diagram (page 64)
Fig. 113 · 3-8. PC Health Status

FAN Fail Alarm Selectable:

This item selects the fan that will be monitored for malfunction.

Shutdown When CPUFAN Fail:

When set to [Enabled], the system will be shut down if the CPU fan is not running.

CPU FanEQ Speed Control(For IS7-G/IS7/IS7-E/IS7-E2/IS7-E2G/IS7-E2V only)

This item allows you to control the CPU fan speed down to a specific percentage.

When set to a specific percentage, the CPU fan speed will run at the percentage you set in this item if the temperature limit set in the item “Active Temperature” is not exceeded.

The CPU fan speed will run at 100% regardless of what the percentage you set in this item if the temperature limit set in the item “Active Temperature” is exceeded.

Active Temperature:

This item sets the temperature limit that would activate the function of “CPU FanEQ Speed Control” option.

Shutdown Temperature:

This item sets the temperature that would shutdown the system automatically in order to prevent system overheats.

CPU Warning Temperature:

This item selects the CPU’s warning temperature limit. Once the system has detected that the CPU’s temperature exceeded the limit, warning beeps will sound.

Page 65 of the Abit IS7-E2V user manual — 3-13. Exit Without Saving
Page 65 · click to enlarge
Page 65

All Voltages, Fans Speed and Thermal Monitoring:

These unchangeable items list the current status of the CPU and environment temperatures, fan speeds, and system power voltage.

3-9. Load Fail-Safe Defaults

This option loads the BIOS default values for the most stable, minimal-performance system operations.

3-10. Load Optimized Defaults

This option loads the BIOS default values that are factory settings for optimal-performance system operations.

3-11. Set Password

This option protects the BIOS configuration or restricts access to the computer itself.

3-12. Save & Exit Setup

This option saves your selections and exits the BIOS setup menu.

3-13. Exit Without Saving

This option exits the BIOS setup menu without saving any change.

BIOS Setup 3-25

Page 66 of the Abit IS7-E2V user manual — 3-9. Load Fail-Safe Defaults
Page 66 · click to enlarge
Page 66

3-26 Chapter 3 3-26 Chapter 3

Page 67 of the Abit IS7-E2V user manual — Appendix A. Install Intel Chipset Software Utility
Page 67 · click to enlarge
Page 67

Install Intel Chipset Software Utility A-1

Appendix A. Install Intel Chipset Software Utility

The installation procedures and screen shots in this section are based on Windows XP operating system. For those of other OS, please follow its on-screen instruction.

Abit IS7-E2V — Appendix A. Install Intel Chipset Software Utility diagram (page 67)
Fig. 114 · Appendix A. Install Intel Chipset Software Utility

Insert the Driver & Utility CD into CD-ROM drive, it should execute the installation program automatically. If not, double-click the execution file at the main directory of this CD to enter the installation menu.

After entering the installation menu, move your curser to [Drivers] tab. Click [Intel Chipset Software Utility]. The following screen appears.

Click [Next]. 3.

Abit IS7-E2V — Appendix A. Install Intel Chipset Software Utility diagram (page 67)
Fig. 115 · Appendix A. Install Intel Chipset Software Utility
Abit IS7-E2V — Appendix A. Install Intel Chipset Software Utility diagram (page 67)
Fig. 116 · Appendix A. Install Intel Chipset Software Utility
1. Click [Next].
4. Choose [Yes, I want to restart my computer now.], and click [Finish] to complete setup.
Abit IS7-E2V — Appendix A. Install Intel Chipset Software Utility diagram (page 67)
Fig. 117 · Appendix A. Install Intel Chipset Software Utility
2. Click [Yes].
Page 68 of the Abit IS7-E2V user manual — Appendix A. Install Intel Chipset Software Utility
Page 68 · click to enlarge
Page 68

A-2 Appendix A A-2 Appendix A

Page 69 of the Abit IS7-E2V user manual — Appendix B. Install Intel Application Accelerator
Page 69 · click to enlarge
Page 69

Install Intel Application Accelerator RAID (IS7-G, IS7) B-1

Appendix B. Install Intel Application Accelerator

RAID (IS7-G, IS7)

The installation procedures and screen shots in this section are based on Windows XP operating system. For those of other OS, please follow its on-screen instruction.

Abit IS7-E2V — Appendix B. Install Intel Application Accelerator diagram (page 69)
Fig. 118 · Appendix B. Install Intel Application Accelerator

Insert the Driver & Utility CD into CD-ROM drive, it should execute the installation program automatically. If not, double-click the execution file at the main directory of this CD to enter the installation menu.

After entering the installation menu, move your curser to [Drivers] tab. Click [Intel Application Accelerator RAID]. The following screen appears.

Click [Next]. 2.

Abit IS7-E2V — Appendix B. Install Intel Application Accelerator diagram (page 69)
Fig. 119 · Appendix B. Install Intel Application Accelerator
Abit IS7-E2V — Appendix B. Install Intel Application Accelerator diagram (page 69)
Fig. 120 · Appendix B. Install Intel Application Accelerator

Click [Yes]. 3.

Abit IS7-E2V — Appendix B. Install Intel Application Accelerator diagram (page 69)
Fig. 121 · Appendix B. Install Intel Application Accelerator
1. Click [Next].

Click [Next]. 4.

Page 70 of the Abit IS7-E2V user manual — Appendix B. Install Intel Application Accelerator
Page 70 · click to enlarge
Page 70
Abit IS7-E2V — Appendix B. Install Intel Application Accelerator diagram (page 70)
Fig. 122 · Appendix B. Install Intel Application Accelerator

Click [Next]. 5.

Abit IS7-E2V — Appendix B. Install Intel Application Accelerator diagram (page 70)
Fig. 123 · Appendix B. Install Intel Application Accelerator

Click [Finish] to complete setup. 6.

B-2 Appendix B

Page 71 of the Abit IS7-E2V user manual — Intel Serial ATA RAID Configuration Utility (IS7-G, IS7)
Page 71 · click to enlarge
Page 71

BIOS Update Guide B-3

Intel Serial ATA RAID Configuration Utility (IS7-G, IS7)

This item allows you to create a RAID array.

Abit IS7-E2V — Intel Serial ATA RAID Configuration Utility (IS7-G, IS7) diagram (page 71)
Fig. 124 · Intel Serial ATA RAID Configuration Utility (IS7-G,…

The on-chip Serial ATA RAID supports the Stripe (RAID 0) and Mirror (RAID 1) RAID set. For the striped RAID set, the identical drives can read and write data in parallel to increase performance. The Mirrored RAID set creates a complete backup of your files. Striped and Mirrored RAID set requires 2 hard disks to do so.

Reboot your system. Press + key while booting up the system to enter the main menu of RAID Configuration Utility:

Name: This item displays the name of the RAID array. You can enter up to 16 characters in length. This name is case sensitive and cannot contain special characters.

Abit IS7-E2V — Intel Serial ATA RAID Configuration Utility (IS7-G, IS7) diagram (page 71)
Fig. 125 · Intel Serial ATA RAID Configuration Utility (IS7-G,…

Strip Size: This item displays the strip value.

RAID Level: This item displays the RAID type.

Capacity: This item displays the capacity of RAID array.

To select the option in this menu, you may:

  • Press < ↑↓ > (up, down arrow) to choose the option you want to confirm or to modify.
  • Press < Enter > to confirm the selection.
  • Press < Esc > to return to previous menu.

NOTE: If you want to create a RAID 0 (striping) array, all the data stored in the hard disks will first be erased! Please backup the hard disk data before starting to create the RAID array. If you want to create a RAID 1 (mirroring) array, please make sure which hard disk is the source disk and which one is the destination disk. If you make a mistake, you may copy the blank data to the source disk, which will result in both hard disks becoming blank!

Create RAID Volume · Main Menu

Page 72 of the Abit IS7-E2V user manual — Intel Serial ATA RAID Configuration Utility (IS7-G, IS7)
Page 72 · click to enlarge
Page 72

Reset Disks to Non-RAID

This item allows you to remove a RAID Array.

This item allows you to reset all RAID data. Type if you want to reset all RAID data.

Abit IS7-E2V — Intel Serial ATA RAID Configuration Utility (IS7-G, IS7) diagram (page 72)
Fig. 126 · Intel Serial ATA RAID Configuration Utility (IS7-G,…
Abit IS7-E2V — Intel Serial ATA RAID Configuration Utility (IS7-G, IS7) diagram (page 72)
Fig. 127 · Intel Serial ATA RAID Configuration Utility (IS7-G,…
  • Press < ↑↓ > (up, down arrow) to select the RAID array you want to delete.
  • Press < Del > to delete the volume.
  • Press < Esc > to return to previous menu.

This item allows you to exit the Intel Serial ATA RAID Configuration Utility. Type if you want to exit.

Abit IS7-E2V — Intel Serial ATA RAID Configuration Utility (IS7-G, IS7) diagram (page 72)
Fig. 128 · Intel Serial ATA RAID Configuration Utility (IS7-G,…

B-4 Appendix B · Delete RAID Volume · Exit

Page 73 of the Abit IS7-E2V user manual — Appendix C. Install Audio Driver
Page 73 · click to enlarge
Page 73

Install Audio Driver C-1

Appendix C. Install Audio Driver

The installation procedures and screen shots in this section are based on Windows XP operating system. For those of other OS, please follow its on-screen instruction.

Abit IS7-E2V — Appendix C. Install Audio Driver diagram (page 73)
Fig. 129 · Appendix C. Install Audio Driver

Insert the Driver & Utility CD into CD-ROM drive, it should execute the installation program automatically. If not, double-click the execution file at the main directory of this CD to enter the installation menu.

3. After the system restarted, a shortcut icon appears at the right corner of Windows task bar.

After entering the installation menu, move your curser to [Drivers] tab. Click [Audio Driver]. The following screen appears.

Abit IS7-E2V — Appendix C. Install Audio Driver diagram (page 73)
Fig. 130 · Appendix C. Install Audio Driver
1. Click [Next].
Abit IS7-E2V — Appendix C. Install Audio Driver diagram (page 73)
Fig. 131 · Appendix C. Install Audio Driver
2. Choose [Yes, I want to restart my computer now.], and click [Finish] to complete setup.
Page 74 of the Abit IS7-E2V user manual — Appendix C. Install Audio Driver
Page 74 · click to enlarge
Page 74

C-2 Appendix C C-2 Appendix C

Page 75 of the Abit IS7-E2V user manual — Appendix D. Install LAN Driver
Page 75 · click to enlarge
Page 75

Install LAN Driver D-1

Appendix D. Install LAN Driver

In spite of the various LAN chips that may be utilized on i865 (i848) series motherboard, the Driver & Utility CD came packed with this motherboard detects the one you have automatically.

To install the LAN driver, please insert the Driver & Utility CD into CD-ROM drive. It should execute the installation program automatically. If not, double-click the execution file at the main directory of this CD to enter the installation menu. The following screen appears.

Abit IS7-E2V — Appendix D. Install LAN Driver diagram (page 75)
Fig. 132 · Appendix D. Install LAN Driver

Click [LAN Driver], and then follow the on-screen instruction to complete the driver installation.

Page 76 of the Abit IS7-E2V user manual — Appendix D. Install LAN Driver
Page 76 · click to enlarge
Page 76

D-2 Appendix D

Page 77 of the Abit IS7-E2V user manual — Appendix E. Install Silicon Serial ATA RAID Driver
Page 77 · click to enlarge
Page 77

Install Silicon Serial ATA RAID Driver (IS7-G) E-1

Appendix E. Install Silicon Serial ATA RAID Driver

(IS7-G)

The installation procedures and screen shots in this section are based on Windows XP operating system. For those of other OS, please follow its on-screen instruction.

Abit IS7-E2V — Appendix E. Install Silicon Serial ATA RAID Driver diagram (page 77)
Fig. 133 · Appendix E. Install Silicon Serial ATA RAID Driver

Insert the Driver & Utility CD into CD-ROM drive, it should execute the installation program automatically. If not, double-click the execution file at the main directory of this CD to enter the installation menu.

Click [Yes]. 3.

After entering the installation menu, move your curser to [Drivers] tab. Click [Silicon Serial ATA RAID]. The following screen appears.

Abit IS7-E2V — Appendix E. Install Silicon Serial ATA RAID Driver diagram (page 77)
Fig. 134 · Appendix E. Install Silicon Serial ATA RAID Driver
Abit IS7-E2V — Appendix E. Install Silicon Serial ATA RAID Driver diagram (page 77)
Fig. 135 · Appendix E. Install Silicon Serial ATA RAID Driver

Click [Next]. 4.

1. Click [Next].
Abit IS7-E2V — Appendix E. Install Silicon Serial ATA RAID Driver diagram (page 77)
Fig. 136 · Appendix E. Install Silicon Serial ATA RAID Driver
Abit IS7-E2V — Appendix E. Install Silicon Serial ATA RAID Driver diagram (page 77)
Fig. 137 · Appendix E. Install Silicon Serial ATA RAID Driver

Click [Next]. 5.

2. Click [Continue Anyway].
Page 78 of the Abit IS7-E2V user manual — Appendix E. Install Silicon Serial ATA RAID Driver
Page 78 · click to enlarge
Page 78
Abit IS7-E2V — Appendix E. Install Silicon Serial ATA RAID Driver diagram (page 78)
Fig. 138 · Appendix E. Install Silicon Serial ATA RAID Driver
Abit IS7-E2V — Appendix E. Install Silicon Serial ATA RAID Driver diagram (page 78)
Fig. 139 · Appendix E. Install Silicon Serial ATA RAID Driver
6. Click [Finish].
9. To run the [SATARaid] application, click [Start] [All Programs] [SATARaid].
Abit IS7-E2V — Appendix E. Install Silicon Serial ATA RAID Driver diagram (page 78)
Fig. 140 · Appendix E. Install Silicon Serial ATA RAID Driver
Abit IS7-E2V — Appendix E. Install Silicon Serial ATA RAID Driver diagram (page 78)
Fig. 141 · Appendix E. Install Silicon Serial ATA RAID Driver
10. This is the SATALink configuration menu. For more information on how to operate, please refer to the “ Help ” menu.
7. Choose [Yes, I want to restart my computer now.], and click [Finish] to complete setup.
Abit IS7-E2V — Appendix E. Install Silicon Serial ATA RAID Driver diagram (page 78)
Fig. 142 · Appendix E. Install Silicon Serial ATA RAID Driver
8. Check [Device Manager]. [Silicon Image SiI 3112 SATARaid Controller] is successfully installed.

E-2 Appendix E

Page 79 of the Abit IS7-E2V user manual — RAID Configuration Utility Menu
Page 79 · click to enlarge
Page 79

Install Silicon Serial ATA RAID Driver (IS7-G) E-3

NOTE: If you want to create a RAID 0 (striping) array, all the data stored in the hard disks will first be erased! Please backup the hard disk data before starting to create the RAID array. If you want to create a RAID 1 (mirroring) array, please make sure which hard disk is the source disk and which one is the destination disk. If you make a mistake, you may copy the blank data to the source disk, which will result in both hard disks becoming blank!

BIOS Setup for Serial ATA RAID (IS7-G)

The Silicon Serial ATA controller supports the RAID array of both Striped (RAID 0) and Mirrored (RAID 1). For the striped RAID set, the identical drives can read and write data in parallel to increase performance. The Mirrored RAID set creates a complete backup of your files. Striped and Mirrored RAID set requires 2 hard disks to do so.

Option 1 Create RAID set

RAID Configuration Utility Menu

This item allows you to create a RAID array.

After you had selected the function from the main menu, press the key to enter the sub menu as shown below:

Abit IS7-E2V — RAID Configuration Utility Menu diagram (page 79)
Fig. 143 · RAID Configuration Utility Menu

Reboot your system. Press + or key while booting up the system to enter the BIOS setting menu. The main menu of BIOS Setting Utility appears as shown below:

Abit IS7-E2V — RAID Configuration Utility Menu diagram (page 79)
Fig. 144 · RAID Configuration Utility Menu
  • Array Mode:

This item allows you to select the appropriate RAID mode for the desired array. There are two modes to choose. When you choose a “Striped” or “Mirrored” RAID set, the utility will ask “Are You Sure?” before the Creating RAID process. Press to confirm.

To select the option in this menu, you may:

  • Press < ↑↓ > (up, down arrow) to choose the option you want to confirm or to modify.
  • Press < Enter > to confirm the selection.

Striping (RAID 0): This item is recommended for high performance usage. Requires at least 2 disks.

  • Press < Esc > to return to previous menu.
  • Press < Ctrl-E > to exit the RAID configuration utility.

Mirror (RAID 1): This item is recommended for data security usage. Requires at least 2 disks.

Main Menu

Page 80 of the Abit IS7-E2V user manual — BIOS Setup for Serial ATA RAID (IS7-G)
Page 80 · click to enlarge
Page 80

Option 2 Delete RAID set

This item allows you to remove a RAID Array on this onboard Serial ATA RAID controller.

Option 3 Rebuild Mirrored set

This item allows you to rebuild only “Mirrored” RAID set.

You need to check which hard disk is the source disk and which one is the destination disk when you decide to rebuild mirrored RAID set.

Option 4 Resolve Conflicts

When a RAID set is created, the metadata written to the disk includes drive connection information (Primary Channel, Secondary Channel).

If, after a disk failure, the replacement disk was previously part of a RAID set (or used in another system), it may have conflicting metadata, specifically in reference to the drive connection information. If so, this will prohibit the RAID set from being either created or rebuilt.

In order for the RAID set to function properly, this old metadata must be first overwritten with the new metadata. To resolve this, select “Resolve Conflict”. The correct metadata, including the correct drive connection information; will then be written to the replacement disk.

E-4 Appendix E

Page 81 of the Abit IS7-E2V user manual — Appendix F. Install VGA Driver (IS7-M)
Page 81 · click to enlarge
Page 81

Install VGA Driver (IS7-M) F-1

Appendix F. Install VGA Driver (IS7-M)

The installation procedures and screen shots in this section are based on Windows XP operating system. For those of other OS, please follow its on-screen instruction.

Abit IS7-E2V — Appendix F. Install VGA Driver (IS7-M) diagram (page 81)
Fig. 145 · Appendix F. Install VGA Driver (IS7-M)

Insert the Driver & Utility CD into CD-ROM drive, it should execute the installation program automatically. If not, double-click the execution file at the main directory of this CD to enter the installation menu.

After entering the installation menu, move your curser to [Drivers] tab. Click [Intel Extreme Graphics Driver]. The following screen appears.

3. Choose “ Yes, I want to restart my computer now ”, and click “ Finish ” to end the installation.
Abit IS7-E2V — Appendix F. Install VGA Driver (IS7-M) diagram (page 81)
Fig. 146 · Appendix F. Install VGA Driver (IS7-M)
1. Click “ Next> ”.
Abit IS7-E2V — Appendix F. Install VGA Driver (IS7-M) diagram (page 81)
Fig. 147 · Appendix F. Install VGA Driver (IS7-M)
2. Click “ Yes ”.
Page 82 of the Abit IS7-E2V user manual — Appendix F. Install VGA Driver (IS7-M)
Page 82 · click to enlarge
Page 82

F-2 Appendix F F-2 Appendix F

Page 83 of the Abit IS7-E2V user manual — Appendix G. Install USB 2.0 Driver
Page 83 · click to enlarge
Page 83

Install USB 2.0 Driver G-1

Appendix G. Install USB 2.0 Driver

To install the USB 2.0 driver for Windows 9x and ME, please insert the Driver & Utility CD into CD-ROM drive. It should execute the installation program automatically. If not, double-click the execution file at the main directory of this CD to enter the installation menu. The following screen appears.

Click [USB 2.0 Driver], and then follow the on-screen instruction to complete the driver installation.

Page 84 of the Abit IS7-E2V user manual — Appendix G. Install USB 2.0 Driver
Page 84 · click to enlarge
Page 84

G-2 Appendix G G-2 Appendix G

Page 85 of the Abit IS7-E2V user manual — Appendix H. ABIT EQ (The Hardware Doctor Utility)
Page 85 · click to enlarge
Page 85

ABIT EQ (The Hardware Doctor Utility) H-1

Appendix H. ABIT EQ (The Hardware Doctor Utility)

ABIT EQ is a self-diagnostic system for PC based on motherboards designed and manufactured by ABIT Computer Corporation. It will protect PC Hardware by monitoring critical items of Power Supply Voltage, CPU & System Fans Speed, and CPU & System Temperature.

The installation procedures and screen shots in this section are based on Windows XP operating system. For those of other OS, please follow its on-screen instruction.

Abit IS7-E2V — Appendix H. ABIT EQ (The Hardware Doctor Utility) diagram (page 85)
Fig. 148 · Appendix H. ABIT EQ (The Hardware Doctor Utility)

Insert the Driver & Utility CD into CD-ROM drive, it should execute the installation program automatically. If not, double-click the execution file at the main directory of this CD to enter the installation menu.

After entering the installation menu, move your curser to [ABIT Utility] tab. Click [ABIT EQ]. The following screen appears.

Click [Next]. 3.

Abit IS7-E2V — Appendix H. ABIT EQ (The Hardware Doctor Utility) diagram (page 85)
Fig. 149 · Appendix H. ABIT EQ (The Hardware Doctor Utility)
Abit IS7-E2V — Appendix H. ABIT EQ (The Hardware Doctor Utility) diagram (page 85)
Fig. 150 · Appendix H. ABIT EQ (The Hardware Doctor Utility)
1. Click [Next].
4. Choose [Yes, I want to restart my computer now.] and click [Finish] to complete setup.
Abit IS7-E2V — Appendix H. ABIT EQ (The Hardware Doctor Utility) diagram (page 85)
Fig. 151 · Appendix H. ABIT EQ (The Hardware Doctor Utility)
2. Click [Next].
Page 86 of the Abit IS7-E2V user manual — Appendix H. ABIT EQ (The Hardware Doctor Utility)
Page 86 · click to enlarge
Page 86
Abit IS7-E2V — Appendix H. ABIT EQ (The Hardware Doctor Utility) diagram (page 86)
Fig. 152 · Appendix H. ABIT EQ (The Hardware Doctor Utility)
5. Execute the ABIT EQ by entering the Windows Menu [Start] [Programs] [ABIT] [ABIT EQ].
Abit IS7-E2V — Appendix H. ABIT EQ (The Hardware Doctor Utility) diagram (page 86)
Fig. 153 · Appendix H. ABIT EQ (The Hardware Doctor Utility)
6. This screen appears. ABIT EQ shows you the status of Voltage, Fan Speed, and Temperature readings as well. (The item names in this screen shot are for reference only, may not be exactly the same as what you see on your monitor.)

H-2 Appendix H

Page 87 of the Abit IS7-E2V user manual — Appendix I. FlashMenu (BIOS Update Utility)
Page 87 · click to enlarge
Page 87

FlashMenu (BIOS Update Utility) I-1

Appendix I. FlashMenu (BIOS Update Utility)

ABIT FlashMenu is the most stable Windows-based BIOS flash available. No more worries from crashing. With one click of BIOS updating, ABIT users can flash their BIOS more easily and in less time.

Abit IS7-E2V — Appendix I. FlashMenu (BIOS Update Utility) diagram (page 87)
Fig. 154 · Appendix I. FlashMenu (BIOS Update Utility)

The installation procedures and screen shots in this section are based on Windows XP operating system. For those of other OS, please follow its on-screen instruction.

Insert the Driver & Utility CD into CD-ROM drive, it should execute the installation program automatically. If not, double-click the execution file at the main directory of this CD to enter the installation menu.

After entering the installation menu, move your curser to [ABIT Utility] tab. Click [FlashMenu]. The following screen appears.

Click [Next]. 3.

Abit IS7-E2V — Appendix I. FlashMenu (BIOS Update Utility) diagram (page 87)
Fig. 155 · Appendix I. FlashMenu (BIOS Update Utility)
Abit IS7-E2V — Appendix I. FlashMenu (BIOS Update Utility) diagram (page 87)
Fig. 156 · Appendix I. FlashMenu (BIOS Update Utility)
1. Click [Next].

Click [Finish] to complete setup. 4.

Abit IS7-E2V — Appendix I. FlashMenu (BIOS Update Utility) diagram (page 87)
Fig. 157 · Appendix I. FlashMenu (BIOS Update Utility)
Abit IS7-E2V — Appendix I. FlashMenu (BIOS Update Utility) diagram (page 87)
Fig. 158 · Appendix I. FlashMenu (BIOS Update Utility)
2. Click [Next].
5. Execute the FlashMenu by entering the Windows Menu [Start] [Programs] [ABIT] [FlashMenu].
Page 88 of the Abit IS7-E2V user manual — Appendix I. FlashMenu (BIOS Update Utility)
Page 88 · click to enlarge
Page 88
Abit IS7-E2V — Appendix I. FlashMenu (BIOS Update Utility) diagram (page 88)
Fig. 159 · Appendix I. FlashMenu (BIOS Update Utility)
6. This FlashMenu screen appears. You can easily update the BIOS from clicking [Update From File], [One Click LiveUpdate], or [LiveUpdate Step by Step] button.

I-2 Appendix I

Page 89 of the Abit IS7-E2V user manual — Q & A:
Page 89 · click to enlarge
Page 89

Troubleshooting (Need Assistance?) J-1

Appendix J. Troubleshooting (Need Assistance?)

Q & A:

Q: Do I need to clear the CMOS before I use a new motherboard to assemble my new computer

A: Yes, we highly recommend that you clear the CMOS before installing a new motherboard. Please

move the CMOS jumper from its default 1-2 position to 2-3 for a few seconds, and then back. When you boot up your system for the first time, follow the instructions in the user's manual to load the optimized defaults.

Q: If my systems hang when I update the BIOS or set the wrong CPU parameters, what should I

A: Whenever you update the BIOS or if the system hangs due to wrong CPU parameters setting, always

clear CMOS jumper before booting up again.

Q: Why the system failed to boot up and nothing was displayed on the screen after I did some

over-clocking or non-standard settings inside the BIOS? Is the motherboard dead? Do I need to return it to where I bought from or go through an RMA process?

A: It should not cause hardware or permanent damage to motherboard when BIOS settings were

changed from default to over-clocking or non-standard status. We suggest the following three troubleshooting methods to discharge CMOS data, recover the hardware default status, and then make the motherboard working again. No need to bother returning the motherboard to where you bought from or go through an RMA process.

1. Switch off the power supply unit and then switch it on again after one minute. If there is no

power switch on the power supply unit, disconnect its power cord for one minute and then connect it back.

Press and hold the key on the keyboard, press the power-on button to boot up system. If it works, loose the key and hit key to enter the BIOS setup page to do the correct settings.

If the situation remains the same, repeat the procedures in Step 1 for three times, or try Step 2.

2. Switch off the power supply unit or disconnect the power cord. Open the chassis cover.

Locate the CCMOS jumper near the button battery. Change the jumper position from default 1-2 to 2-3 for one minute to discharge the CMOS data, and then put it back to default 1-2 position.

Close the chassis and switch on the power supply unit or plug in the power cord. Press the power-on button to boot up system. If it works, hit key to enter the BIOS setup page to do the correct settings.

If the situation remains the same, try Step 3.

3. The same procedure as Step 2, but in the meantime of discharging the CMOS data, pull out

ATX power connectors from motherboard and remove the button battery during CMOS discharging.

system? · do?

Page 90 of the Abit IS7-E2V user manual — Appendix J. Troubleshooting (Need Assistance?)
Page 90 · click to enlarge
Page 90

Q: How can I get a quick response to my request for technical support?

A: Be sure to follow the guidelines as stated in the “Technical Support Form” section of this manual.

If you have a problem during operation, in order to help our technical support personnel quickly determine the problem with your motherboard and give you the answers you need, before filling in the technical support form, eliminate any peripheral that is not related to the problem, and indicate it on the form. Fax this form to your dealer or to the company where you bought the hardware in order to benefit from our technical support. (You can refer to the examples given below)

Example 1:

With a system including: motherboard (with CPU, DRAM, COAST...) HDD, CD-ROM, FDD, VGA CARD, MPEG CARD, SCSI CARD, SOUND CARD, etc. After the system is assembled, if you cannot boot up, check the key components of the system using the procedure described below. First remove all interface cards except the VGA card and try to reboot.

If you still cannot boot up: Try installing another brand/model VGA card and see if the system will start. If it still does not start, note the VGA card model, motherboard model, Bios identification number, CPU on the technical support form (refer to main instructions), and describe the problem in the problem description space provided.

If you can boot up: Insert the interface cards you have removed back into the system, one by one and try to start the system each time you insert a card, until the system will not start. Keep the VGA card and the interface card that caused the problem inserted on the motherboard, remove any other cards or peripheral, and start again. If you still cannot start, note the information related to both cards in the add-on Card space provided, and don’t forget to indicate the motherboard model, version, BIOS identification number, CPU (refer to main instructions), and give a description of the problem.

Example 2:

With a system including the motherboard (with CPU, DRAM, COAST...) HDD, CD-ROM, FDD, VGA CARD, LAN CARD, MPEG CARD, SCSI CARD, SOUND CARD, after assembly and after having installed the Sound Card Driver, when you restart the system, when it runs the Sound Card Driver, it resets automatically. This problem may be due to the Sound Card Driver. During the Starting DOS… procedure, press SHIFT (BY-PASS) key, to skip CONFIG.SYS and AUTOEXEC.BAT; edit CONFIG.SYS with a text editor, and in function the line that loads the Sound Card Driver, add a remark REM, in order to disable the Sound Card Driver. See the example below. CONFIG.SYS: DEVICE=C:\DOS\HIMEM.SYS DEVICE=C:\DOS\EMM386.EXE HIGHSCAN DOS=HIGH, UMB FILES=40 BUFFERS=36 REM DEVICEHIGH=C:\PLUGPLAY\DWCFGMG.SYS LASTDRIVE=Z Restart the system. If the system starts and does not reset, you can be sure that the problem is due to the Sound Card Driver. Write down the Sound Card model, motherboard model, BIOS identification number on the technical support file (refer to main instructions), and describe the problem in the space provided.

We will show you how to fill the “Technical Support Form”.

J-2 Appendix J

Page 91 of the Abit IS7-E2V user manual — Appendix J. Troubleshooting (Need Assistance?)
Page 91 · click to enlarge
Page 91

Troubleshooting (Need Assistance?) J-3

Main instructions:

To fill in this “Technical Support Form”, refer to the step-by-step instructions given below:

1*. MODEL: Note the model number given in your user’s manual.

ExampleIS7-G, IS7, IS7-E, IS7-E2, IS7-E2G, IS7-E2V, IS7-M, IS7-V2

2*. Motherboard model number (REV): Note the motherboard model number labeled on the motherboard as “REV:*.**”.

ExampleREV: 1.06

3*. BIOS ID and Part Number: See the on screen message.

4. DRIVER REV: Note the driver version number indicated on the DEVICE DRIVER disk (if any) as “Release *.**”. For example:
Abit IS7-E2V — Appendix J. Troubleshooting (Need Assistance?) diagram (page 91)
Fig. 160 · Appendix J. Troubleshooting (Need Assistance?)

5*. OS/APPLICATION: Indicate the operating system and applications you are running on the system.

Example: MS-DOS® 6.22, Windows® 98 SE, Windows® 2000, etc

6*. CPU: Indicate the brand and the speed (MHz) of your CPU.

Example:(A) In the “Brand” space, write “Intel”; in the “Specifications” space, write “Pentium® 4 1.9GHz”.

7. HDD: Indicate the brand and specifications of your HDD(s); specify if the HDD is using IDE1 or IDE2. If you know the disk capacity, indicate it and check (“ ”) “ ”; in case you give no indication, we will consider that your HDD is “ IDE1” Master.

Example: In the “HDD” space, check the box; in the Brand space, write “Seagate”; in the Specifications space, write “ST31621A (1.6GB)”.

8. CD-ROM Drive: Indicate the brand and specifications of your CD-ROM drive. Specify if it uses IDE1 or IDE2 , and check (“ ”) “ ”; in case you give no indication, we will consider that your CD-ROM is “ IDE2” Master.

Example: In the “CD-ROM drive” space, check the box, in the Brand space, write “Mitsumi”, in the Specifications space, write “FX-400D”.

9. System Memory (DDR SDRAM): Indicate the brand and specifications (DDR DIMM) of your system memory. Such as Density, Description, Module Components, Module Part Number, CAS Latency, and Speed (MHz).

For example: In the Brand space, write “Micron”; in the Specifications space, write: Density: 128MB, Description: SS 16 Megx72 2.5V ECC Gold, Module Components: (9) 16 Megx 8, Module Part Number: MT9VDDT1672AG, CAS Latency: 2, Speed (MHz): 200 MHz.

Please give us the detailed information of your DDR SDRAM module; it will help us to simulate the problems you met.

10. ADD-ON CARD: Indicate which add-on cards you are absolutely sure are related to the problem.

If you cannot identify the problem’s origin, indicate all the add-on cards inserted into your system.

Page 92 of the Abit IS7-E2V user manual — CPU *
Page 92 · click to enlarge
Page 92

Technical Support Form

Company Name Phone Number:
Contact Person Fax Number:

E-mail Address:

Model * BIOS ID # *

Motherboard Model No. DRIVER REV

Hardware Name Brand Specifications

CPU *

HDD IDE1 IDE2

ADD-ON CARD

Problem Description:

Show 4 more labels / short text on this page
J-4 Appendix J · OS/Application * · CD-ROM-Drive IDE1 IDE2 · System Memory
Page 93 of the Abit IS7-E2V user manual — Appendix K. How to Get Technical Support
Page 93 · click to enlarge
Page 93

Troubleshooting (Need Assistance?) K-1

Appendix K. How to Get Technical Support

(From our website) http://www.abit.com.tw (In North America) http://www.abit-usa.com (In Europe) http://www.abit.nl

Thank you for choosing ABIT products. ABIT sells all our products through distributors, resellers and system integrators; we have no direct sales to end-users. Before sending email for tech support please check with your resellers or integrators if you need any services, they are the ones who sold you your system and they should know best as to what can be done, how they serve you is a good reference for future purchases.

We appreciate every customer and would like to provide the best service to you. Providing fast service to our customers is our top priority. However we receive many phone calls and a huge amount of email from all over the world. At the present time it is impossible for us to respond to every single inquiry. Therefore it is quite possible that if you send an email to us that you may not receive a response.

We have done many compatibility tests and reliability tests to make sure our products have the best quality and compatibility. In case you need service or technical support, please understand the constraint we have and always check with the reseller who sold the product to you first.

To expedite service, we recommend that you follow the procedures outlined below before contacting us. With your help, we can meet our commitment to provide the best service to the greatest number of ABIT customers:

1. Check the Manual. It sounds simple but we have taken a lot of care in making a well-written and thorough manual. It is full of information that doesn't only pertain to motherboards. The CD-ROM included with your board will have the manual as well as drivers. If you don't have either one, go to our Program Download Area of the Website or FTP server.
2. Download latest BIOS, software or drivers. Please go to our Program Download area on our Website to check to see if you have the latest BIOS. They are developed over periods of time to fixes bugs or incompatibilities. Also please make sure you have the latest drivers from your peripheral cards makers!
3. Check the ABIT Technical Terms Guide and FAQ on our Website. We are trying to expand and make the FAQs more helpful and information rich. Let us know if you have any suggestions. For hot topics, check out our HOT FAQ!
Page 94 of the Abit IS7-E2V user manual — Appendix K. How to Get Technical Support
Page 94 · click to enlarge
Page 94
4. Internet Newsgroups. They are a great source of information and many people there can offer help. ABIT's Internet News group, alt.comp.periphs.mainboard.abit, is an ideal forum for the public to exchange information and discuss experiences they have had with ABIT products. Many times you will see that your question has already been asked before. This is a public Internet news group and it is reserved for free discussions. Here is a list of some of the more popular ones:

alt.comp.periphs.mainboard.abit comp.sys.ibm.pc.hardware.chips alt.comp.hardware.overclocking alt.comp.hardware.homebuilt alt.comp.hardware.pc-homebuilt

5. Ask your reseller. Your ABIT authorized distributor should be able to provide the fastest solution to your technical problem. We sell our products through distributors who sell to resellers and stores. Your reseller should be very familiar with your system configuration and should be able to solve your problem much more efficiently than we could. After all, your reseller regards you as an important customer who may purchase more products and who can urge your friends to buy from him or her as well. They integrated and sold the system to you. They should know best what your system configuration is and your problem. They should have reasonable return or refund policies. How they serve you is also a good reference for your next purchase.

6. Contacting ABIT. If you feel that you need to contact ABIT directly you can send email to the ABIT technical support department. First, please contact the support team for the branch office closest to you. They will be more familiar with local conditions and problems and will have better insight as to which resellers offer what products and services. Due to the huge number of emails coming in every day and other reasons, such as the time required for problem reproduction, we will not be able to reply to every email. Please understand that we are selling through distribution channels and don't have the resources to serve every end-user. However, we will try to do our best to help every customer. Please also remember that for many of our technical support team English is a second language, you will have a better chance of getting a helpful answer if your question can be understood in the first place. Be sure to use very, simple, concise language that clearly states the problem, avoid rambling or flowery language and always list your system components. Here is the contact information for our branch offices:

7. RMA Service. If your system has been working but it just stopped, but you have not installed any new software or hardware recently, it is likely that you have a defective component. Please contact the reseller from whom you bought the product. You should be able to get RMA service there.

K-2 Appendix K

Page 95 of the Abit IS7-E2V user manual — Appendix K. How to Get Technical Support
Page 95 · click to enlarge
Page 95

Troubleshooting (Need Assistance?) K-3

North America, South America ABIT Computer (U.S.A.) Corporation 45531 Northport Loop West, Fremont CA, 94538, U.S.A. Tel: 1-510-623-0500 Fax: 1-510-623-1092 Sales: sales@abit-usa.com Latin America Sales: ventas@abit-usa.com Marketing: marketing@abit-usa.com Web Site: http://www.abit-usa.com

RMA Center 46808 Lakeview Blvd. Fremont, CA 94538, U.S.A.

UK and Ireland ABIT Computer (U.K.) Corporation Ltd. Unit 3, 24-26 Boulton Road, Stevenage, Herts SG1 4QX, UK Tel: 44-1438-228888 Fax: 44-1438-226333 E-mail: sales@abitcomputer.co.uk

Germany and Benelux (Belgium,

AMOR Computer B.V. (ABIT's European Office) Van Coehoornstraat 7, 5916 PH Venlo, The Netherlands Tel: 31-77-3204428 Fax: 31-77-3204420 Sales: [email protected] Web Site: http://www.abit.nl

Netherlands, Luxembourg), France, Italy, Spain, Portugal,

Austria, Czech, Romania, Bulgaria, Slovakia, Croatia, Bosnia, Serbia, and Macedonia

Asguard Computer Ges.m.b.H Schmalbachstrasse 5, A-2201 Gerasdorf / Wien, Austria Tel: 43-1-7346709 Fax: 43-1-7346713 E-mail: [email protected]

Shanghai ABIT Computer (Shanghai) Co. Ltd. Tel: 86-21-6235-1829 Fax: 86-21-6235-1832 Web Site: http://www.abit.com.cn

Russia and CIS ABIT Computer (Russia) Co. Ltd. Sales: [email protected] Info: [email protected] Web Site: http://www.abit.ru

Greece, Denmark, Norway, · Sweden, Finland, and · Switzerland

Page 96 of the Abit IS7-E2V user manual — Thank You
Page 96 · click to enlarge
Page 96

Poland ABIT Computer (Poland) Co. Ltd. Przedstawicielstwo w Polsce ul. Wita Stwosza 28 50-149 Wrocław Tel: 48 71 780 78 65 / 66 Fax: 48 71 372 30 87

Japan Web Sitehttp://www.abit4u.jp

ABIT Computer Corporation No. 323, Yang Guang St., Neihu, Taipei, 114, Taiwan Tel: 886-2-8751-8888 Fax: 886-2-8751-3382 Sales: sales@abit.com.tw Marketing: market@abit.com.tw Web Site: http://www.abit.com.tw

(Serving all other territories

not listed above. Taiwan is 8+ GMT time, and may have different holiday

calendar from yours.)

8. Reporting Compatibility Problems to ABIT. Because of tremendous number of email messages we receive every day, we are forced to give greater weight to certain types of messages than to others. For this reason, any compatibility problem that is reported to us, giving detailed system configuration information and error symptoms will receive the highest priority. For the other questions, we regret that we may not be able to reply directly. But your questions may be posted to the Internet news group in order that a larger number of users can have the benefit of the information. Please check the news group from time to time.

Thank You

ABIT Computer Corporation

http://www.abit.com.tw

K-4 Appendix K · Taiwan Head Office

Sources

References & links

Pages referenced in this manual — manufacturer, support and downloads.

Ask about the Abit IS7-E2V

Owners and our team usually reply within a day — and your question helps the next person too.

Add your email to get notified when it’s answered — no spam, ever.

0 questions
No questions yet about the Abit IS7-E2V

Be the first to ask — other owners or our team will answer.

Original document

Abit IS7-E2V manual PDF

96 pages·4.2 MB·Computer Hardware·PDF
Click any page above to open it here
Page 1 / …
100%
Loading pages…