Instruction/ maintenance manual of the product CNC1020 LOREX Technology
Go to page of 5
Camera Features 2 Camera Features • Patented Mirroring Technology Makes Camera In visib le to the Human Eye Yet Allows The Camera to Properly View • Security Mirror Form Factor is Ideal for Commer.
Mounting Options 3 Mounting Options The Camera can be installed to a wall or ceiling, or can be ceiling flush mounted using included cable pass-through bracket. Wall Mounting: 1. Mount the camera to the desired mounting surface by firmly attaching the Mounting Bracket using 4 screws (at points listed as S crews 1~4 on the below diagram).
Installing the Camera & Optional Extensi on Cable 4 Ceiling Mounting: 1. Remove the Mounting Bracket from the back of the Camera (4 screws) 2. Drill a hole in the ceiling large enough to pass the BNC/Power Cable through. NOTE : If using the Ceiling Mounting method, run the Extension Cable to the location prior to mounting the Camera.
Installing the Camera & Optional Extensi on Cable 5 Installing the Camera & Optional Extension Cable 1. Connect the optional Extension cable to the Camera: • Connect the BNC & Power ends of the cable to the Camera • Connect the Power Adaptor connector to the AC Power Cable attached to the camera.
Camera Specifications 6 Camera Specifications Image Sensor Type 1/3” Color CCD Image Sensor Video Format NTSC Effective Pixels 510H x 492V (251K) Horizontal Resolution 420 TV Lines Scan System 525 Lines 2:1 Interlace Sync System Internal S/N Ratio More than 52dB without AGC Iris AES AES Shutter Speed 1/60 ~ 1/120,000 Min Illumination 0.
An important point after buying a device LOREX Technology CNC1020 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought LOREX Technology CNC1020 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data LOREX Technology CNC1020 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, LOREX Technology CNC1020 you will learn all the available features of the product, as well as information on its operation. The information that you get LOREX Technology CNC1020 will certainly help you make a decision on the purchase.
If you already are a holder of LOREX Technology CNC1020, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime LOREX Technology CNC1020.
However, one of the most important roles played by the user manual is to help in solving problems with LOREX Technology CNC1020. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device LOREX Technology CNC1020 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
