Instruction/ maintenance manual of the product T360 Logan Graphic Products
Go to page of 4
Total Trimmer www.logangraphic.com General PurPose Trimmer For best results use only authentic Logan blades Purchase Date Model T300 Model T360 Instruction Manual Introduction The Logan T rimmer offers many unique features and durability that make it the best value trimmer/cutter available.
Identification Board A. Squaring Arm B. Squaring Arm Stop C. Lifter D. Cutting Head E. Cutting Bar F. Handle Bar Safety • Remove blades when servicing machine. • Do no place your fingers near blade when using machine. • Be sure lifter bar is down when cutting.
Operation 1. Raise cutting bar using lifter arm or raise to full open position. (Fig. 6) 2. Slide material onto board and against squar- ing arm. (Fig. 7) 3. Adjust Stop to desired dimension. (Fig. 8) 4. Lower Cutting Bar 5. Slide Cutting Head beyond end of material.
Fig. 12 Fig. 13 Fig. 14 Maintenance and Adjustment Cutting Head Bearings If cutting head is loose or wobbling, tighten three adjustment screws to eliminate the play and improve cut accuracy. (Fig. 12) Resquare Squaring Arm 1. Place a carpenter’s square against cutting bar first.
An important point after buying a device Logan Graphic Products T360 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Logan Graphic Products T360 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Logan Graphic Products T360 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Logan Graphic Products T360 you will learn all the available features of the product, as well as information on its operation. The information that you get Logan Graphic Products T360 will certainly help you make a decision on the purchase.
If you already are a holder of Logan Graphic Products T360, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Logan Graphic Products T360.
However, one of the most important roles played by the user manual is to help in solving problems with Logan Graphic Products T360. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Logan Graphic Products T360 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
