

TV
233–32399

Remote control – TV functions 3
Daily Handling 10 Switch on/off 10 Change per gram me 10 General menu control 11 Set sound 11 Set image 11 Operate device 11
What to do if... 21 – 22
Controls 4 – 5
Technical data 23 Mechanical data Electrical data
Welcome 6 Thank you Equipment of equipment Setting up and cleaning disposal
Operating modes 12 – 17 TV operation 12 Picture in picture 13 EPG operation 14 –15 Teletext operation 16 Video operation 17
For your safety 7 – 8
First start-up 9 Batteries – Remote control remote control to set the operation of TV, Connect on First commissioning
Operation of additional equipment 18 – 20 Sign-in and connect AV devices 18 video playback 19 Loewe Video Recorders and Loe we DVD players directly operate 20



Aventos/mode
Connections on the right side of the device

Sound inputs white = left, red = right
Video input AVS (Y/C, FBAS)
Readiness indicator Connections and operation on the right side of the device Operational indication On/Off button


Video input AVS (Y/C, FBAS)
Set program on/off /in the menu

Ms.

Service socket/connection Loewe Audio
for video recorders, DVDs, decoders etc.

✳ Antenna socket of the satellite tuner at Twin-Sat: antenna jack of the 2nd Satellite tuners at the digital-tuner DVB2S basic satellite: antenna jack
Digital audio inputs Dolby digital module ✳✷
IR ✳✷ Connection for IR-Link
✳ at Twin-Sat: antenna socket of the 1st. Satellite tuner antenna input of the terr. Digital TV Tuners (DVB2 T-CI) at the digital tuner DVB-2S Basic satellite: digital sound output
Digital sound output Dolby digital module ✳✷
Antenna output of the terr. Digital TV Tuners DVB2T-CI
/connect to the antenna socket of the PIP tuner
Connection for active center speaker Dolby Digital module ✳✷
Plug in antenna lead here if no PIP tuner/DVB-T tuner is installed
Connection for active surround speakers Dolby Digital module ✳✷
Or at the terr. digit Connecting Tuner DVB2T-Basic to the antenna system via an aerial switch
Plug in antenna socket of the PIP tuner/antenna feed line here
Connection for subwoofer in standing, Loewe loudspeaker system
Connection for special subwoofer Dolby Digital Module ✳✷
/or with the output of terr. Digital TV Tuners DVB2T-CI connect /or at terr. digit Connecting Tuner DVB2T-Basic to the antenna system via an aerial switch
or Home Automation✳
✳ depending on the type of device or retrofittable
✳✷ retrofittable at Nemos 32

Thank you very much,
Equipment of equipment
Cleaning
You have chosen a Loewe product. We are delighted to have won you as a customer.
In this operating manual, the ma xi - times from stat tung is described. Functions marked with ✳ are not included in all TV sets. Displayed menu content can vary depending on the equipment of the device. If the device is equipped with a digital recorder or DVB-T, another operating manual is included. You can query the equipment of your device in the main information – “equipment”.
Clean the TV and the remote - which nowg only with a damp, soft and clean cloth (without any sharp or shy de Rei nigungs using tel).
With Loewe, we combine the highest demands on technology, design and user-friendliness. This applies to TV, video and accessories similarly. Neither the technology nor the design should serve an end in itself, but rather convey to our customers a maximum possible enjoyment of sight and hearing. Also in design, we did not allow ourselves to be guided by short-term fashion trends. After all, you have acquired a high-quality device that should not make you tired of tomorrow and the day after.
Packaging and cardboard They have opted for a technically very high who - ti ges and durable product. For the disposal of packaging, we have paid a fee in accordance with national regulations to commissioned recyclers who collect the packaging from the specialist dealer. We recommend that you keep the original carton and packaging material well-built so that the device can be transported in an optimally protected manner if necessary.
Mimo TV sets have front side, left and right hand grip recesses. Wear the TV on these grip recesses.
We have designed the TV so that you can easily use it with menus. If you need In for ma tio nen to Be die - nung, hide a compartment with the INFO button the info texts, so get him hen quickly.
Please note that the feet of TV wheels are placed on softwood furniture (for example). spruce, tan ne, pine etc.), due to the weight, can be pressed backwards and that when the device slips traces are made. The plastic material of the feet contains soft-molds, which can singly sniff out the surface from gull to sol. In such cases, use a pressure-resistant base approximately the size of the standing surface of the TV set.
Attention: EU Directive 2002/96/EC regulates the proper take-back, treatment and recycling of used electronic equipment. Electronic waste must therefore be disposed of separately. Please do not throw this device into the normal household waste for disposal! You can send your old device free of charge to designated return points or, if necessary. You will drop it off at your dealer if you buy a comparable new device. Further details about the take-back (also for non-EU countries) can be obtained from your local administration.
You will find Ant worten in the keyword directory of your TV set for many questions about technology. If it concerns the operation of the TV set, you can access a function directly from the key word ver zeich nis. Thus, the reading-up in a detailed description of lending is superfluous; and therefore only the most important instructions are explained in this version.
Please also note and follow the Si cher - heits hinwei se on the following pages.
Make sure that no bright light or sun falls on the screen and thus clouds the image with Re fl e xio nen.
The remote control allows you to control three Loewe devices, in addition to this TV set also a LoeWE video recorder and a Loeswe DVD player.
The device

For your own safety and to prevent unnecessary damage from your device, read and observe the following security instructions:

Use is granted in the above-mentioned permitted environment.
The racks shall be provided with at least 5 cm of free space laterally and 10 cm above for air circulation. Set up the device so that it is not
Please do not put any water filled
direct sunlight and no additional heating by heating per.
Flower vases, no burning candles etc. on the television.


flat, stable base. The device must be on all feet. The device should not project out of the front, especially when placed in cabinets or shelves. When the device is placed on a platform
antenna and power plugs.
Make sure that it is larger than the basic surface of the device.
When the boots are in use, they will be used.
Use only Ori gi nal-Zube as far as possible
Make sure that the load capacity of the soils is sufficient.
horns such as e.g. Loewe Racks and Stands.
If the television is on a rolling console,

Move the rolling console carefully, because the rolled consule and device could tip. Rolling brackets can noticeably reduce the stability of devices placed thereon, and therefore only use rolling bricks provided for the device and tested. Do not leave children unto themselves
handling television sets.
Don't leave kids in the un with tel ba ren
playing around the television set, the device could be overturned, displaced or pulled down from the standing surface and injure people.

Remote control
Subsequent
Switch on
Batteries To insert or change the batteries, press on where the arrow is embossed. Push the bat te rie fach de kel down and take it off. Use Alkali Manganese LR 03 (AAA) batteries while keeping the + and – locations in place.
Power grid Connect the TV to a 230V/50–60 Hertz socket.
The display and the on/off switch are combined in one unit at Nemos.
Press the on/off button so that it latches.


Antennae At Mimo, pull the cover on the wheels - te Rück be te to the rear. Clamp the cables into the cable holder and move them down through the recess. Plug the antenna connector that comes out above the PIP antennas socket into the ante -nen buch se of the VHF/UHF tuner. The antenna plug of your antennas or Ka bel an la ge is inserted into the socket of the PIP tuner. When equipped with a DVB-T module 2 T -CI, connect your antenna systems to the socket of the DVb-T (IN) module and connect the lower socketing (OUT) to the Antennen input of the VHF/UHF tuner. If a ge mein sa me antenna for digital and analog signals is used when equipped with the terrestrial Digital-Tuner 2 T-Basic, close the tern. Digital tuner and analogue tuner via an anten nen weiche to the antens an la ge. If equipped with one or two satellite tuners, connect the satellite antennas to the SAT sockets (see Fig. 1). Page 5. Re-mount the cover at Mimo.
After the first switch-on, the audio recording of the TV set is performed. Follow the menus. First, you need to select the menu language for your device. Then specify which anten you have connected to your TV and in what country you operate it. Then start the search. The TV set searches, stores and sorts all at your Anten nen an la ge to emp fan - gen the Pro gram me. You will then see an overview of the stored programs, in which you can mark your favorite per gram me. Finally, log on your video devices, decoders, Loewe Audio system and home automation with the connection unit and connect them according to the illustrated connection scheme with the TV set.
Subsequently, push the lid back on from below.Note for disposal of battering:
The batteries of Er turausrüstung contain no pollutants such as cadmium, lead and mercury. According to the battery regulation, used batteries must no longer be disposed of in household waste. Throw used batteries and applicable into the collection containers placed on store when traded.
With the pressing of OK-Button in the direction of arrow select the Ein stel lun gen ...

... Confirm your A STEL - lun gen with OK. You will then come to the next menu...
Set remote control to the operation of the TV set
... Press this button if you need information about the settings.
How you operate other Loewe devices is described on page 20.
You can always get the first commissioning, e.g. after a move. Call in the main information (key) INFOThe word ver - show nis. Then select the keyword “First In be trieb nah me wie der ho len”. With OK Then start the “First commissioning”.
TV-Press the button

On/off switching
Change of programmes
... concerning the programme overview

Your TV is equipped with an eco-standby power supply. In standby mode, the power consumption drops to a low power. If you want to save even more power, turn the device off with the on/off button. But be sure that EPG data is lost and not executed per gram of timer recordings via the TV.
Programs up/down (only Lieb lings - per Gram me, if the Pro Gram view shows this).
P–
AVS AV2 AV1 0 VIDEO 1 ARD 2 ZDF 3 SAT.1 4 RTL 5 VOX 6 DNR
7 S–RTL 8 N–TV 9 DSF 10 TM3 11 PRO7 12 RTL 2 13 WDR 3 14 BR 3 15 HR 16 MDR 3
...with the number keys of the remote control The device has a dynamic memory with 220 (with DVB 1470) Speicher plätzen. If up to 9 programs are stored, you only need to enter one digit, up to 99 two digits, until 999 three cubes and over 999 four digit (please see the Program about view how many Per Gram me have been saved).
If the TV is on, you can turn it off with the blue On / Off button of Fern be die nung in Bereischaft. The red Be rid schafts an zei ge on the device lighted. If the green display also lights up, a timer recording is executed, an EPG data acquisition takes place or radio operation without image screening is active.

Mark program (if possible, the marker te program is displayed in the PIP image) or mark with numerical keys
1-digit programmes Press the 0 – 9 button for one second, and immediately change the program. Or press button 0 – 9 for a short time, then change program after 2 seconds (change immediately if only 9 programs are saved). 2-digit programmes Press the second number button for a second, and then change the program immediately. Or both number keys press briefly, then changes program after 2 seconds (immediately at up to 99 per gram men). 3-digit programmes Press the third number button for a second, and then change the program immediately. Or press the three number keys briefly, then change the program after 2 seconds (immediately at up to 999 per gram men). 4-digit programmes Press the four number keys briefly, and then change the program immediately. Depending on how many per gram me have been stored, you can also set one or more zeros before the number and select them. for programme 7 = 07 or 007 or 0007.
From the standby, it is best to switch on again with the blue On/Off button or with a digit key (program 0 - 9). The green operating indicator then lights up.
With OK Turn on the TV, see the program over - view and can choose a program.
Switch to radio mode.
If you turn off the TV with the on/off button on the device, none of the ads will light up.
Calling up audio/video programs – AV selection
for the reproduction of AV devices (see also page 19).
If the TV is turned off like this, you can turn it back on with the On/Off button.
VIDEO AV1 AV2 AVS AV selection
Select AV jack or VIDEO for transmitters of the video recorder.

General menu operation
Setting tone
Setting up the image
Using the TV menu and picture menus, we show you how to move in the menus. With which buttons you can operate, you will see each displayed at the bottom of the menu.
Call up the image menu, or with MENU Calling the TV menu...


via "other ..." you can select other tone settings and...
... and with OK Calling

clay from clay
Other sound settings:
The tone menu, or with MENU The TV menu...

)
(
... and with OK Calling
Volume, contrast and color
Press the function button until the desired function is marked

+ more loud strong ke, contrast or color
Sound settings: sound over the sound of the TV or other system, listening mode, tone adjustment, highs, lows, loudness and balance. Sound selection for speakers and headphones, AV output sound, volume of the head hörer, loud-strong ke automatic and max. Volume.
– less loud, stronger ke, contrast or color

TV operation
The Remote control declaration shows the function of each button in the various operating modes of the TV set and remote control.
Some Settlements In the TV menu: Child safety If you want your children to be unable to view all or certain programs once a day, then use parental controls.
At the first start-up and during everyday operation, the device is in TV mode. This is also the case if none of the other devices such as EPG, Teletext, PIP, video or radio are selected. Each of these modes has a menu that you can use with the MENU-key, and about own assignments of the color keys.
The Keyword list Answer many questions about the distance se hen. When it comes to the operation, you have direct access to the operating function from the key word ver - zeich nis.
Overlays You can reset the duration and position of the inserts, the content of the program and Status on denzei ge defi and activate or disable zap2text as an insert.
Loewe TV sets are supplied in various equipment variants. As your device is equipped, you will find under the menu item "Equipment”.
Colour keys function in TV mode The four color keys can be used with Funk ti-nen. Ex works, the following functions are set up:
Temporary services You can turn your TV on/off at times you set or have it remembered with a beep.
Once you have made all the settings and connections, you can use "Choice of Control" on “A little bit of a bee, nowg.” To the falcons. Then all Be triebs - ar ten menus "Ein stel lun gen" and "Anschluss" are no longer available. Turn off “Be die nung” again if you want to make settings.
Time and date When you receive Teletext, the correct setting of date and time is recorded by the device. Time is used for information purposes for timer recordings, time services and EPG. If you do not receive a teletext, set the date and time and don't turn off your device with the power button because these ones are lost.
In the TV menu “Settings” – “Funk ti ons ta sten”, you can use other functions to assign the buttons.
Language If once "your" menu language is not a quiz, you must select the "language" menus in a language that is unintelligible to you: Press MENU-Key (TV menu), mark the last menu point (A stel lungen), press the OK-Key and mark the last menu item on the last page (Spra che). Call this menu with the OK-Cast on. Now mark the desired language and confirm with the OK-Button.
Normal values Settings for image and sound that you have before ge - nom men can be saved in this menu and called up again later.
Time 20:15
Connectors For information, see the chapter “Login and Connect AV Devices” on page 18.
zap2text Some broadcasters use this service. If reference is made to teletext pages during a broadcast, this number of letters will be stored and/or displayed by the TV set. Call the teletext page with the button TEXT from the overlay during the broadcast or out of this menu.

Picture in the picture (PIP) ✳
Setting up “iPIP” Turn on PIP, with the button MENU Call the PIP menu.
The frame around the PIP image must be green. If not, press the green button. Start the program scan with the blue button. The PIP frame turns blue.
Standard PIP functions: In the case of standard PIP, a PIP image is faded into the TV picture currently displayed. The frame around the PIP image is initially green for standard PIP.
“Funk ti- o na lität”
Position functionality iPIP standard PIP
The Pro gram me now change automatically. Stop the program scan with the blue button. The PIP frame is green again.
The frame around the PIP image must be green. If not, press the green button. Press the red button, and the PIP image becomes a still picture. Press again – moving image.
The menu is set out in the iPIP function: With iPIP, the TV picture that is currently displayed becomes a PIP image. For the TV picture, select a different program and keep an eye on the PIP image. This allows you to temporarily “ban” advertising or program parts into the PIP image. In iPIP, the frame around the PIP image is orange.
The frame around the PIP image must be green. If not, press the green button. Change the images with the yellow button.
Change program of the PIP image
The frame around the PIP image must be green. If not, press the green button. Now, as usual, choose the program.
Call them with the MENU-Click the PIP menu.

Select “Position”.
The PIP image becomes the TV picture again when you turn off PIP.
Select the symbols for position.
Change the TV picture program
The frame around the PIP image must be white. If not, press the green button. Now, as usual, choose the program.


EPG operation
between per se similar topics, all themes and the individual main subjects such as film, news, show, music etc. The list of sen thun gen below is spre chend ak tua li siert. Then you can see the signs of a glory or an event that they want to watch.
Programming recording for video recorders The broadcast marked with the keys is to be carried forward for recording by pressing the red button.
EPG is the electronic programming system for television programmes. With this system, you can easily find the broadcasts that interest you (sorting by time, day, topic and program). You can save Sen Dungen and program recordings.
Call for detailed information When detailed information about the marked sending is offered, you see too much of it. TEXT-The key is shown. With this button you call up the detail-In for ma tio nen.
When using EPG for the first time (not at DVB), an assistant will activate, who guides you through the necessary settings. Then, let them do the data collection (see next page).
Favorite programs all ARD ...
14:03 ARD WunschBox -15:00 20:45 MDR The German Schlagermagazin 14:04 ARD WünscheBox
Other functions in the EPG menu: Call the EPG menu with the MENU-Button open.
Overview of pre-marked consignments The programmes you have registered can be found in an overview, also DVB-Ra dio sen dun gen.
Select and pre-mark with OK
Recording day (Sa 4.8./14:03) Topics (Music) Programs (Favorite-)
The frame turns blue when you press the blue button. The blue frames stands for Per gram-m from choice. Use the arrow key to choose between your favorite per gram men, all programs or the program you have just set. You can select another one per gram if you go to “...”, mark a program in the following selection and use it with OK store.
Turn on TV when you are ready At the time of the pre-registered broadcast, you can automatically turn on the TV set from the Bereit - schafts be drive. If you are not present at this time, a Si cher heits ab frage ensures that the TV set is switched off again after 5 minutes.
jetzt demnächst 21:00 22:00 23:00 00:00 01:00 02:00 03:00 04:00 ... EPG Aktuell: Fr 03.08./20:08
19:15 VOX Back to the past 19:30 ZDF WISO 19:30 BR3 Always further, always higher and then? 19:40 SAT1 is true! 19:40 RTL Good times, bad times –20:15 19:50 MDR Get started 20:00 ARD Tagesschau 20:00 HR3 Tagesschau 21:00 NDR Tagesschau 22:00 WDR Tages Schau
Select and watch with OK
Recording day (Fr 3.8./now) Topics (all topics) Programs (all)
Info Details Menu End
Report/start pre-registered consignment If the TV set is switched on at the time of the previously recorded broadcast, you can report the start of the broadcast or immediately change it.
The first line has a green frame. The Green framework stands for Time and date; with the green color button switch between time and day or, if the frame has a different color, back to the green. With the arrow keys you choose: now, next to it, the time or day for the beginning of Sen-dungen. Accordingly, the list of sensues below ak tua li siert is given. Then, they will be able to see the signs or watch them.
In addition to the operating instructions for the color keys, the current settings are displayed.
Direct time input You can also enter the time directly with the Zah len keys of the keyboard. After entering the first digit, the time next to the green key symbol is initially represented by stars and then replaced with a given number. The Mar kie rung jumps on the next possible broadcast. Enter four digits, e.g. 2100. If the time entered has elapsed, your input will be given to the next day.
Short info lines For many broadcasts, Kurz is transmitted in for ma tio nen. Set how many lines this information should contain, or turn off the short info lines.
EPG entry When you start the EPG operation, you can keep your last settings for theme and program - from choice or begin with all topics and programs.
Personal topics all - ... Hobby Sport Child Knows Music ...
12:00 NDR WunschBox -13:00 14:03 ARD WünscheBox 20:45 MDR The German Schlagermagazin 21:00 N DR Bi uns to Hus 01:25 NDR Bi us to Hues 12:00NDR Wunschbox 14:04 ARD WunschBox
View or pre-record the programme Then, the messages that are marked with the keys will be displayed by you. OK-Press the button. The symbol + is placed before the title of the broadcast. When the shipment is received, it will be switched to this shipment.
Select and pre-mark with OK
Recording day (Sa 4.8./12:00) Topics (Music) Programs (all)
The frame turns yellow when you press the yellow button. The Yellow frames stands for The Men - by Choice. With the arrow tasten select

Selecting Programs for EPG Select the programs for which information should be collected.
Performing data collection After these settings or after each switch-off with the power button, the data must first be collected. To do this, select the program that you have defined as a provider and leave it in shell for about 1 hour or switch off the device into the vehicle. After about 2 minutes, in addition to the red one, the green indicator lights up. The dates are about 1 hour, in the case of devices with a DVB module somewhat longer. At night between 2 and 5 o’clock, the data is automatically recorded when the device has been switched off.
If you want to change providers or have other programs evaluated, you can do this in the EPG menu.
0 VIDEO 1+ARD E 2+ZDF E 3+SAT.1 E 4+RTL E 5 VOX 6+S–RTL E 7+N–TV 8 DSF
9+S–RTL E 10+MDR 3 11 DSF 12 TM3 13+PRO7 E 14+RTL 2 E 15+WDR 3 E 16+BR 3 E 17+HR 3 E
18 KIKA 19 PHOENIX E 20 EUROPRT 21 CABLE 1 22 MTV 23 CNN INT. 24 HOT 25 TV 5 26 VIVA

Mark programs with OK
+ Mark All mark Only this mark.
Overview of the pre-registered programmes Provider/program selection Favorite programs Personal topics Selection Timer At Vormerkung TV turn on more ...
+ marked programs are favorite programs. For E (terrestrial, cable and analogue satellites) and D (digital), the provider provides data that is already marked (blue font).
Personal topics defi kidney The programs that interest you find faster if you never ren your personal topics de fi. You can run in the EPG menu “Personal li che The men from choice” and put together your own topics.
Marking/removal of the marking programme
10 3SAT 18 PRO7 19 RTL2 22 TV 5 25 TRT 1
Film News Show Hobby Sports Child Know Music Culture
Music in general Jazz Rock / Pop Classical folk music / Entertainment Musical / Opera Other
Select All Remove Everyone OK
Remove with OK from Selection
Start a provider search run (green button). This can take some time.
With the button RADIO Turn the radio on and off. Is at least one Sa tel li ten tuner and is e.g. a DVB module built into your TV set, radio programs are available to you. If none of these additional modules is built in, you can select the program over view or with the keys only the sound a goge and play it.

This is followed by a program offer search and a list of TV stations from which data are transmitted via tragen. Go with the OK- Continue to the provider selection button. If the program offer has met your wishes, go with the blue button to the selection of programs.
Other ... pre-registered shipment only report data acquisition from a short information line no EPG entry last setting
If you e.g. no EPG provider can receive and in the TV set is not a DVB built, you should scarf out the da ten er shades sung.

Teletext operation
Further functions for page selection Representations of the teletext pages
even changing sides (HOLD)
Teletext transmits information, such as e.g. Re-rect, weather, sports, watch pro grams before and subtitles.
a page on the page with a number of pages (page catching)
223 1O.3O A twin to many 314 12.OO daily show at twelve
Tagsschau 11O TV Guide. . 3OO/4OWeather 17O Culture 5OO Sport 2OO/6OO TXT Quiz 555 Lotto/Toto 666 Economy 7OO Index 1O1 Imprint 1O7 – + Content daily
1OO 1OO ARD-TEXT O1.O7.O1 1O:3O:42
ARD-Text Teletext in the first
Last report: Libyan Ambassador in London no longer excludes compensation for Lockerbie victims from football: Rolf Hüssmann is to be new sports director at VfB Stuttgart 223 1O.3O A twin too many 314 12.OO Tagesschau at twelve
1OO 1OO ARD-TEXT O1.O7.O1 1O:3O:42
ARD-Text Teletext in the first
Last report: Libyan Ambassador in London no longer excludes compensation for Lockerbie victims from football: Rolf Hüssmann is to be new sports director at VfB Stuttgart 223 1O.3O A twin too many 314 12.OO Tagesschau at twelve
Then, in the scriptures of the book. In the bottom menu line you can see which sub-areas are already accessible.
Tagsschau 11O TV Guide. . 3OO/4OO Weather 17O Culture 5OO Sport 2OO/6OO TXT Quiz 555 Lotto/Toto 666 Economy 7OO Index 1O1 Imprint 1O7 – + Content daily Page selection
Tagsschau 11O TV Guide. . 3OO/4OO Weather 17O Culture 5OO Sport 2OO/6OO TXT Quiz 555 Lotto/Toto 666 Economy 7OO Index 1O1 Imprint 1O7 – + Content daily Page selection
Money Options 2 1 2 3 4 5 6 7 8 9 1O – +
Programming timer recordings Call the On nah me button • in teletext operation, the programs of the current transmitter. Select the shipment you want to record and confirm with it OK-Button. For "Timer Data" select VCR, DVD Recorder or DR (if a digital recorder is built-in) and whether you want to have one-time recordings or series on genommen. Confirm with OK.
Many transmitters use the operating system TOP, some FLOF (e.g. CNN. Your device supports both systems. The pages are divided into the men be reiche and themes. After you flick in Teletext, up to 390 pages are speared so that you have quick access.
1OO 1OO ARD-TEXT O1.O7.O1 1O:3O:42
ARD-Text Teletext in the first
Side selection with the color keys The colored bars (in the case of TOP) or The colored font (at FLOF) in the penultimate line shows you with which colour keys you can be - rei chen to the men and brow themes further.
The TOP table is a readily available overview of Teletext. The table can only be called up for transmitters with the TOP operating system.
Calling up the TOP table topic area mar kie ren
Here you will find functions such as “New message”, “On decen” of hidden information, switch to other programs (if there is another tuner), enter 4-digit numbers directly (when they do not automatically change) and program video timer recordings via teletext. In the settings, you find menus to defie the preview pages, subtitle pages and teletext pages.
Lotto/Toto 666 Economy 7OO Index 1O1 Imprint 1O7 – + Content daily Page selection
Overview of Tagesschau Weather Sport 1 TV Guide ARD today ARD tomorrow FS broadcasts TV Guide 2 Culture Society more. . .
Weather forecast cities Regional travel int. Cities Bioweather
New after.
Program –/+ Subs. Recording timer
Choose the page and watch with OK OK MENU
Select topics column

Video operation
Pre-coiling (only for VCR) or Search for forward
In the menu “Timer” you can change timer data, delete or new On nah men per gram mie ren. In the “Recording” menu, you can find timer programming via EPG, Teletext or by hand. In the menu "An schlüs se" you can switch on or use other AV devices. log off. In the “Digital Link Plus Transmission” menu, the program data of the TV set (no satellites) are transferred to the Digital Link Plus video recorder. In the "Settings" menu, you can enter pre- and post-production time recordings and series on nah me t- o le ranz.
With the video control bars, you can use Loewe Video Recorders and LoeWE DVD players even if they are hidden. The Vi deo ge rä te must be registered via the Euro-AV sockets (Scart) an ge schlos sen and via the menu “Anschschlos se”. Digital Link must be switched on the Loewe video recorder. This is the only way you can use the control panel. Also for timer recordings of satellite programs controlled by the TV set, you need Digital Link. You can blow up to two control bars, but these are only displayed by ge mel deten video recorders and DVD players.
Next chapter (only on DVD)
Previous Chapter (only for DVD)
When you start a recording, the program just selected will be on ge nom men. You can not switch to another program now, it is locked. Only when the recording is finished, you can flake around. Exceptions: 1. You have several tuners (not PIP tuners) built into the TV set, then you can watch another program with the second tuner. 2. You can also view the signal via an AV connection (e.g. DVD player or a second video recorder. 3. In a video recorder with Digital Link Plus, the tuners of Vi deo re - cor ders are used for recording (not satellite programs).
Digital Link Plus Video recorders have the possibility to transmit program data from the TV set to the video channel via Euro-AV cable (not for satellite programs). After each change in the program of the TV set, it is asked whether a data should be passed through tragung. When recording with a Digital Link Plus video recorder, the reception part of the Vi deo re - cor ders is always used (no satellite transmitter), and the tuner of the TV set is available for television.
AUX VCR STOP
Info menu end OK
Select video control bar, if e.g. several video recorders or a DVD player and one Vi deo re cor which are at geschllos sen.
Loewe Video Recorders also have Digital Link, a system for controlling Loewe video recorders via the Euro-AV cable. If the Loewe video recorder only has Digital Link, the tuner of Fern seegerä tes is used for Auf nah me. If you have your Loewe Vi deo re cor, then with the Loe we Fern be die nung you can use the Vi de o re cor der. The operation via the video control bar funk tio also works with Digital Link.
Select video input (Euro-AV jack) for the video recorder
Digital link must be switched on at the Vi deo re cor.
Rewinding (only for VCR) or Searching Back
Info Back to End OK
Only use Euro-AV cables that are fully connected, otherwise Digital Link or Digital Link Plus will not work.
In the video menu you have the following possibility - keiten:

Registration of equipment Already at the first commissioning you have all connected devices (video recorder, camcorder / digital camera, DVD player, DVD recorder, Loewe audio system, pay-TV decoder and home automation) with the connection assistant to ge mel det and to Geschlosss sen. If you want to connect more or other devices, you have to call the connection assistant in the TV menu – “An-schlüs se”.
Find and store the VCR transmitter (if no Euro AV cable is available) Switch on the test transmitter at the video recorder or insert a recorded cassette and start recording. Then call up the program 0 on the TV set (set to channel 36 from work). Select the first Me nü point (VCR) for AV-off. To prevent the finding of “normal” TV stations during channel searches, temporarily unplug the antenna connector at the anchor input of the video recorder (the cable to the antorial system).
Search channel (blue button)
Channel E37 (E21...E69)
Frequency 599.25 MHz Name E37 TV standard B/G
If the transmitter was found:
Colour standard Autom.
Search run 0-9: Input
An overview of stored programs is displayed
Connect video/DVD recorders In addition to the connection via Euro-AV sockets, you also have to connect the antenna (only antennas or cable system) to the TV set via video/DVD recorder. This means that the anten - nen si gnal is available both to tuners in the Vi deo re cor der and also to those on TV. If a DVB-T module is installed, connect the Vi deo re cor der with the IN socket of the DVb-T Module using an antenna cable; if the DvB-D 2 Basic Tuner is installed you also use an anchor switch to connect the terrestrial tuner.

0 VIDEO 1 ARD 2 ZDF 3 SAT.1 4 RTL 5 VOX 6 S–RTL 7 N–TV 8 DSF
9 S–RTL 10 N–TV 11 DSF 12 TM3 13 PRO7 14 RTL 2 15 WDR 3 16 BR 3 17 HR 3
18 KIKA 19 PHOENIX 20 EUROPRT 21 CABLE 1 22 MTV 23 CNN INT. 24 HOT 25 TV 5 26 VIVA

“A stel lun gen” mar kie ren
Re-plug the previously removed Anten nen - stec ker on the video recorder. If there are any problems because a TV station is broadcasting on the same channel as the video recorder, you must change the transmission channel at the video recording device (see instruction manual for the video records) and re-search the transmitter of the Vi deo re cor dess at the television set.

Mark “Area” and select “UHF”

Video playback To see the image of your video recorder, DVD player or camcorder on your TV and hear its sound you have several options: 1. They use the Euro-AV sockets on the TV set and video recorder. This is the best of all possibilities – good quality of picture and sound. For camcorders and digital cameras, it is best to use the front socket AVS. Is used by a video recorder with digital link
Calling AV program via the AV selection
VIDEO AV1 AV2 AVS AV selection
Select AV jack or VIDEO for transmitters of the video recorder.
Now you see the playback from the on - lock the AV device.
Plus, the image of the video orecorder is displayed on the current Pro gram place. Is used by a standard video recorder,
Calling AV program via the programme overview
DVD player, camcorder or digital camera playback, select from the AV-off selection (key) 0 AV) or the program of view, the AV-jack to which the Vi deo guesses is at geschllossen. Video recorders are given at Wie der ga be
AVS AV2 AV1 0 VIDEO 1 ARD 2 ZDF 3 SAT.1 4 RTL 5 VOX 6 DNR
7 S–RTL 8 N–TV 9 DSF 10 TM3 11 PRO7 12 RTL 2 13 WDR 3 14 BR 3 15 HR 16 MDR 3
Switching voltage that the TV set can emit (can be activated in the connection assistant or set to “Yes” in the TV menu – Settings – AV-Ein stel lungen – Schaltspar nung). Then, in Wie der ga be, as with Digital Link Plus Vi deo re cor dern, the image of the video recorder on the current Pro gram place is a ge blen det. 2. Registered Loewe video recorders and DVD players can also be controlled via the Vi deo be dien - leis te. More on page 17. 3. They use the antenna connection between video recorder and TV set. The sound is sent only in mono. For this, select the first menu item in the AV selection, e.g. VIDEO.
0 9... Selection of programmes:
Change programs favorite program sort change
Select and switch with OK
When sorting numerically, always find the AV jacks at the beginning of the overview without program numbers.
Mark the AV jack
Then call the marked AV jack.
Now you see the playback from the on - lock the AV device.
Call AV Selection · View Program Overview · Info Menu End

Loewe Video Recorder and Loe we DVD Players Directly You can toggle the TV remote control for controlling Loewe video recorders and Loe we DVD players. These devices can be operated directly or, if concealed on set-up devices, via the TV. Then the function Digital Link must be switched on at the video recorder and DVD player.
Select the device to be operated:
The DVD players can be used in the following modes: Xemix 6122DO, 8122DA and 6222PS.
for video recorders: VCR-press button, the display above it lights up approx. 5 seconds
In VCR operation, the following video recording systems can be operated: ViewVision 8106H, 8136H,8176H, 6306H ,6336H .
DVD-press button, the display above it lights up approx. 5 seconds
Switch back to TV-die nung: TV-Press the button.
For devices other than the Loewe listed, please use the original remote control or video control bar.
When operating in VCR or DVD mode, the display above the key VCR and/or the illuminates. DVD.
Features for Loewe Video Recorder VV 8106H, VV8136H, vv8176H functions for Loeswe DVD player Xemix 6122DO, 8122DA, 6222PS


What to do if...
Various menu items are not call bar (shown in gray) or the menus for operating modes EPG and Teletext cannot be accessed
"Simplified operation" activated in the main in for m- a ti on
Deactivate "Simplified operation" in the main in for ma ti on. INFO-Press the button, select "Selection of scope" and use OK Calling. Set the "Simplified operation" to "no".
In the video menu, timer recording, change timers and delete timers do not appear
Sign up video recorders in the TV menu – An schlüs se.
In the video menu, "Connections" cannot be set to ge - ru fen (shown in gray)
a) It is just taking a timer recording
a) Wait until the timer recording is finished
or delete timer b) Wait until you stop recording.
b) You are currently recording from the TV
via the video control strip
In the TV menu, it is not possible to access the “Pro gram me” item and in the main information the point “Automatically search for Pro-gram me”.
The parental control is activated. If these menus were accessible, children could still set the programs.
Deactivate program-related parental controls: In the TV menu – Settings – Turn off parental safety or PIN a ge ben.
The control of the Loewe video recorder via the video operating bar and the timer funk tio - never runn or not right
a) In the video recorder, the function Digital Link
a) Activate the Digital Link in the video recorder (see
not activated or not possible b) Euro-AV cable not connected c Video recorder not logged in
Instructions for use of the Vi deo re cor dess) b Connect Euro-AV cable c Sign up video recorder.
General problems connecting external devices via an AV input
a) The device is not on in the menu "Connections"
a) In the “main information” under “An schlüs se”
ge mel det or otherwise than in the following diagram shown connected
The connection scheme with the actual installation swipe and give if connected as shown b correctly set standard c) adjust AV signal properly
b) The AV standard is set incorrectly c. The Av signal is set wrong
If the AV standard or AV signal is set to "automatic", this can lead to incorrect identifications for signals which do not conform to standards. Then the standard and signal must be set according to the specifications in the operating instructions of the external device.
TV set is placed on the southern part of the globe (e.g. Australia, South Africa
Adjust horizontal position: 1. Main information with INFO Calling 2. Keyword directory – Set image – Move horizontally – call 3. Adjust horizontal image position.

What to do if...
Connection of a decoder does not work or is not error-free
a) The signal is not decoded because in
a) Follow the instructions again in
TV menu – connections are not the correct decoder programs selected b) When operating a decoder, sound is missing because in the television
TV menu – connections and select the appropriate decoder programs. b) Follow the instructions again on TV-
Menu – Connections associated with the wrong decoder sound
Menu – Connections and select the correct sound source (decoder, TV or autom.), see instructions of decoders.
No sound on the TV speakers
a) In the tone menu, under "Ton" is the point "Tone".
a) Change setting to "TV"
over ..." not set to "TV b" For devices with 9 pins of the cube jack
b) Into the cube bushing must be either a blind
of the device rear side, nothing is plugged into this socket
Plug with bridges, Loewe loud-speaker systems or Homeautomation be a plugged in.
All menus appear in the wrong language
Menu language was accidentally wrong a ge - set
Setting your menu language: 1. Turn off picture in image (PIP) and turn all on - thin END) 2. Calling the TV menu (key) MENU) 3. Select the last menu item and OK-Press the key 4. Select the last menu item on the last page and OK-Press the button 5. Now choose the right language and 6 with OK confirmation.
Digital Link Plus does not work
a) The video recorder was not used as digital link
a) Under "Connections" the Digital Link Plus
Plus device logged in or connected to the wrong socket b) Euro-AV cable is not fully wired
Sign up and connect according to the sketch b) Exchange Euro-AV cable
(Pin 10 not occupied) c) Some video recorders can only
c) Release status of the video recorder again
when first commissioning from the TV set via Nehmen d All or some terrestrial and cable
make (see Recorder's manual) d terrestrial and cable programs so that
Programs are stored in program slots ≥ 99
Sort that you come between 1 and 99 to Lies Gen.
Teletext misrepresents different characters
In the Teletext menu, the wrong character set is set
Set the correct character set: Teletext Menu – Settings – Character Set – Standard or the corresponding character set.
Problem · Possible cause · Remedy

Mechanical data
Nemos 29 Art.No 63439 Dimensions (cm) approx. 78,0x62,0×53,0 (BxHxT) Weight (kg) approx. 46 Real Flat-Line Screen Class 4:3 72 cm, visible 68 cm
Connectors Mini-DIN (front) Video IN Y/C (S-VHS/Hi8) Cinch (Front) Video In FBAS (VHS / 8mm) Cinching (front), Audio IN L/R Klink 6,3mm (front): Headphones 32–200 Ohm IEC jacks 75 Ohm antenna/cable/DVB-T✳
Aventos 3770 ZW Art.No 63447 Aventos 3970 ZW Art.No 62407 Dimensions (cm) approx. 72,5x53,5x49,5 (BxHxT) Weight (kg) approx. 38.5 Real Flat-Line Screen Class 16:9 70 cm, visible 66 cm
F-jack 75 Ohm✳ SAT and SAT A/D AV 1 Video IN/OUT Y/C (S-VHS/Hi8) Video IN /OUT FBAS (VHS / 8mm) Audio IN/Out L/R AV 2 Video IN or OUT ✆✷Y/C(S- VHS/HI8) Video In/out FBA (VGS/8mm) Video IN RGB Audio IN or Out L/Cinch Audio OUT Level adjustable/fixed 9 pin cubic jack
Nemos 32 Art.No 65440 Nemos 32/DR+ 65440.42 Nemos 32/DVB-T 65440.14 Dimensions (cm) approx. 90,0x61,0x53,0 (BxHxT) Weight (kg) approx. 57 Real Flat-Line ray tube format 16:9 screen class 81 cm, visible 76 cm
Aventos 3772 Z Art.No 63449 Aventos 3972 ZP Art.No 62406 Dimensions (cm) approx. 74,0x59,5x49,5 (BxHxT) Weight (kg) approx. 44 Real Flat-Line Screen Class 4:3 72 cm, visible 68 cm
and Audio System Mini-DIN 8 pin service and L-Link Klinke 3,5mm✳ IR-Link OUT Cinchţ Center OUT Centre Signal Cinching✷ Subwoofer OUT LFE signal Cinches✶ Surround OUT Audio IN 1 multichannel signal Cinch✳ Dig. Audio IN 2 multichannel signal Cinch✳ Dig. Audio OUT multichannel signal
Aventos 3781 ZW Art.No 63454 Aventos 3981 ZW Art.No 64433 Aventos 81/DR+ Art. No 64433.42 Mode C 32 Art.No 64432 dimensions (cm) approx. 81.0x59,5x55,5 (BxHxT) Weight (kg) 53 Real Flat-Line Format 16:9 Screen class 81 cm, visible 76 cm
Chassis Designation Media Plus (Q2500/B)
Media Plus (Q2550/B) PAL/SECAM 100 Hz
PAL 60/NTSC 120 Hz Full Digital 100 AMD✳/DNC power supply 220V to 240V/50–60Hz power consumption in operation approx. 145 watts
Standby
✳ depending on equipment, type of device or
Mimo 28 Art.No 62432 Dimensions (cm) approx. 71,0x54,0×52,5 (BxHxT) Weight (kg) approx. 39 Real Flat-Line Screen Class 16:9 70 cm, visible 66 cm
✳✷ OUT only for Digital Link Plus Video Recorder
Mimo 29 Art.No 62431 Dimensions (cm) approx. 66,0x62,0×54,0 (BxHxT) Weight (kg) approx. 46 Real Flat-Line Screen Class 4:3 72 cm, visible 68 cm
Mono/stereo/2-tone audio rating 2 x 10 watts / 8 ohm audio music power 2 x 20 watt / 8 Ohm Teletext HiText (level 2.5)
Nemos 28 Art.No 63442 Dimensions (cm) approx. 80,5x55,0x53,0 (BxHxT) Weight (kg) approx. 44 Real Flat-Line Screen Class 16:9 70 cm, visible 66 cm
retrofittable

Racks for Aventos and Mode Ask your specialist dealer, he offers you the right rack from Loewe’s delivery range depending on the type of device.
Single-/Twin-Sat Tuner and Digital TV Decoder Your TV can be connected to the integrable SAT 6 or TWIN-SAT 6 and a di gi tal TV decoder. A combination of both components enables the reception of analogue and digital Sa tel li ten-Pro gram men. With the Digital TV Upgrade Kit 2 S-Basic, all unencrypted digital satellite programs can be received. With the Digital TV Upgrade Kit 2 T-Basic, all unencrypted digital terrestrial programs can be received. For the reception of encrypted (and unencryption) digital TV programs (e.g. Premiere) the following modules are available: The Digital TV upgrade kit 2 Sat/Twin-Sat CI P for satellite reception and the Digital TV Upgrade kit 2- T-CI for digital television programs. All modules are integrated into the TV set and operated with the remote control/menu control of the TV.
IR-Link (only for Nemos 32) This allows you to control a hidden video device from another manufacturer or the d-Box via the TV set with the original remote.
Racks for Mimo Mimo Rack 1 offers space for the accommodation of two components. Mimo Rack 2 is a setup solution for your TV as one-size- guesses. Both racks are designed and color-matched to your TV.
Loewe Video Recorder Loewe video recorders are designed, operated and technically tailored specifically to LoeWE TV sets. In the daily use of devices are clearly Ver ein - fa chungen noticeable.
Racks for Nemos The Nemos Rack is a positive design rack that can be rotated by ± 45o manually. The cables are laid hidden in the rack. It has space for three additional devices. The rack M13 is a steel rack with one floor. A further floor can be retrofitted. These racks include a cover for the connections of the TV set. If necessary, this cover (without rack) can be obtained from your specialist dealer (best). No 88705.009 platinum or 88706.020 anthracite
Loewe DVD Player and Recorder Loewe DVD players and recorders are characterized by shapes and colors matching Loe we TV sets, coordinated user guidance and technology. Together, both devices form a system that offers many advantages.
Loewe Audio Systems and Active Speaker Systems In the interaction of a Loewe TV set with a Loeswe audio system and a Loshe speaker system, an excellently coordinated Home Cinema system is created. Advantages are high operating comfort, suitable design and adapted technology.
Home automation Control of light switches, dimmers, roller blinds etc. with the menu on TV.
Dolby Digital Decoder (only on Nemos 32) For multi-channel playback from the DVD player in Dolby Digital cinema quality. The Dolby Digital Decoder is integrated into the TV.
Pay and thus the child safety. Please, please
Printed in Germany 1/03.05/5,0 Changes reserved!
True.
Safe place to be -
Owners and our team usually reply within a day — and your question helps the next person too.
Be the first to ask — other owners or our team will answer.