


TV
233–33319.020
Connect 42 · Connect 37 · Connect 32




Switch on / switch off to standby mode (page 12)
(page 20) Sound off/on
(page 52) LED display for current operating mode
Switch over to radio mode (1 (page 12, 36)
(page 11, 52) Switch over to TV mode
(page 52) Switch over to operate recorder (page 45) Timer overview on/off (page 22) Set picture format
Switch over to operate DVD player (page 52) Audio adjustment /with logged in amplifier: Sound via (page 20) Select station directly; MENU: Enter numbers of letters (page 18)
AV selection (page 19)
(page 16) "Assist+“ menu on/off
PIP on/off (picture in picture) (page 28)
(page 30) Electronic Programme Guide on/off
Index on/off (3 (page 16) MENU: Info texts on/off (page 15)
(page 32) Teletext on/off (3
(page 15) Menu on/off
Status display on/off (3 (page 23) MENU: Hide menu (page 15)
(page 20) V+/V– volume louder/quieter
P+/P– station selection up/down (page 18)
(page 29) PIP: Position of the PIP picture; (page 15) MENU: select/set
Station list on (page 18) MENU: confirm/call (page 15)
Yellow button: (3 Last station (page 22) Blue button: (3 Programme info on/off (page 22)
Select station up (2
Select station from (2 (3 (page 12) /in the wizard: Back
Still frame off (2
Still frame on (2
Still frame on/off (2
(1 Radio only for DVB reception, provided the station broadcasts
(3 If MHEG-5 is selected for the location of TV set UK or IRL during the
this. Otherwise switch-over to an audio input. (2 When equipped with Digital Recorder, these buttons have
first installation, the button has a different function.
different functions, see Digital Recorder user guide.
Direct recording · -


Display: = Standby = Operation = Operation without on-screen display (Radio, EPG data capture or timer recording)
The mains switch is located on the bottom of the set in the middle
Button R: Radio on/off (1 (back to TV mode) Switch on the radio from the standby mode
DR+ = Digital Recorder inactive (no recording, no playback) DR+ = Digital Recorder active (offset TV viewing or archive playback) DR+ = Digital Recorder active (archive recording)
(1 Radio only for DVB reception, provided the station broadcasts this.
Otherwise switch over to an audio input. (2 Only in sets with integrated Digital Recorder. (3 Only in sets with Network Mediaplayer (see operating manual Network Mediaplayer).
Display Connectivity (3 · -


Factory settings: AV1: DVD player AV2: DVD recorder You can change this during the initial installation (page 12) or in the connection wizard (page 37). Before you connect other devices or make any changes, please start the connection wizard (page 37) and the sound components wizard (page 41), and then follow the instructions that are displayed on the TV set.
USB connection 1 (USB stick/card reader)
(e.g. for camcorder)
Audio in right (AVS)
AUDIO IN1 L/R - audio input left/right (analogue) AUDIO OUT L/R - audio output left right (analogue)
LAN (2 - network connection
Connect antenna output with ANT-TV
AUDIO IN2 - audio input (analogue)
USB (1 - USB connection 2 (USB stick/card reader)
(1 See pages 58 and 59 for equipment and upgrade possibilities. (2 Only in sets with Network Mediaplayer (see operating manual Network Mediaplayer).


Factory settings: AV1: DVD player AV2: DVD recorder You can change this during the initial installation (page 12) or in the connection wizard (page 37). Before you connect other devic es or make any changes, please start the connection wizard (page 37) and the sound compo nents wizard (page 41), and then follow the instructions that are displayed on the TV set.
USB connection 1 (USB stick/card reader)
(e.g. for camcorder)
Audio in right (AVS)
AUDIO IN1 L/R - audio input left/right (analogue) AUDIO OUT L/R - audio output left right (analogue)
LAN (2 - network connection
Connect antenna output with ANT-TV
USB (1 - USB connection 2 (USB stick/card reader)
(1 See pages 58 and 59 for equipment and upgrade possibilities. (2 Only in sets with Network Mediaplayer (see operating manual Network Mediaplayer).

Thank you! Loewe sets high standards in technology, design and user friendliness. This applies equally for TV, video and accessories.
About this operating manual For many questions concerning the technology you will find an answer in the index of your TV set. If your question concerns TV set operation, you can access a function directly from the index of the Tv set. Owing to this possibility, this operating manual only explains the most important operating steps. The index/glossary from page 60 onwards gives explanations of certain terms used in the TV set and the operating manual. Sections beginning with the symbol ➠ indicate important instructions, hints or conditions for the following settings. Terms which you will find in the menu or printed on the remote control or the TV set are printed in bold letters. In the description, the necessary operating elements are located to the left of the text with the handling instructions. Depending on the connected accessory equipment the menus in the TV set can differ from those described here. All the station names, programme contents, the illustrated photos, titles, albums and album covers in this operating manual are examples.
Your new TV set is equipped for the TV standard "HDTV" (High Definition Television). With its high definition screen and the future-oriented digital interfaces HDMI (High Definition Multimedia Interface) it offers possibilities for watching HDTV broadcasts in an excellent picture quality. HDTV is a worldwide, digital standard in the 16:9 format which revolutionises normal TV viewing. It is broadcast with an up to five times greater resolution than conven tional signals and therefore creates an unexpectedly 3D image. The TV set is equipped for digital reception. You can use the everywhere TV (DVB-T) already broadcast many times as well as digital cable (DVB-C) and also digital satellite reception (DVB-S) with a upgrade. The Loewe Digital+ HD platform in sets with Digital Recorder even enables dual reception of uncoded stations of DVB-T, DVB-C and DVB-S. If MHEG-5 is selected for location of TV set UK or IRL, DVB-C und DVB-S reception is not possilbe, see also on page 13. The TV set can be upgraded with an AC3 module. You can then connect a speaker system (e.g. Loewe Individual Sound) and enjoy the movie sound. Dolby Digital, dts and MPEG are decoded. You can connect a card reader or a USB stick with digital photos and/or MP3 music files to the USB connection of your TV set and view your pho tos or play music via the integrated PhotoViewer/MusicBox software. All functions can be controlled with the Loewe remote control. We have designed the TV set in such a manner that you can easily operate it with the help of wizards and menus. Information about the menu settings is displayed automatically. You will quickly comprehend the context.
S
TV set equipment See the rating plate on the rear of the set for the precise product desig nation. The precise features are listed in the Integrated features item in the index of the TV set (see page 16).
Trademarks Made under licence by Dolby Laboratories. "Dolby“ and the double-D symbol are trademarks of Dolby Laboratories.
The screen font "LoeweL2700“ is based on the "Tavmjong Bah Arev (tavmjong.free.fr)“ font, which in turn is based on "Bitstream Vera“. Bitstream Vera is a trademark of Bitstream Inc. This set contains software based partly on the work of the Independent JPEG Group.
LCD TV set Power cable Antenna cable Table mount (assembled) Remote control Assist with two batteries Marketing and service card Additional antenna WLAN if the TV set is equipped with Network Mediaplayer (not in Connect 32 Media) Network Mediaplayer operating manual if the TV set is equipped with Network MediaPlayer. Digital Recorder operating manual if the TV set is equipped with Digital Recorder. This operating manual
Acknowledgements Loewe Opta GmbH Printed in Germany Industriestraße 11 Published on 12/07-2.0 TB/FP D-96317 Kronach TV SW: 5.0.0 / DVB SW: 5.0.0 www.loewe.de © Loewe Opta GmbH, Kronach
All rights including translation, technical modifications and errors re served.

Operating convenience with wizards
Assist+ You can select the most important operating modes directly with the Assist+ menu (ASSIST button). Selectable modes are: TV, Radio digital, Teletext, PhotoViewer, Index and when equipped with Digital Recorder or Network Mediaplayer also Digital Recorder archive or MediaNetwork (see page 16).
This TV set offers user prompting with wizards that take you through the settings step-by-step. You can return to the previous step or exit the wizard at any time.
Programming and managing recordings The recording wizard helps you to programme a video recording with a VCR, DVD or Digital Recorder, if installed (see page 44).
Initial installation The initial installation wizard helps you with the initial installation and connection of any existing equipment (see page 12).
Station list The station list is a list of all the stored stations. You can also use the station list for switching stations conveniently (see page 18).
Setting up the antenna You enter in the antenna wizard which antenna signals are available to you. The antenna wizard is called in initial installation (see page 12). You can also open the antenna wizard in the TV menu under Connections → Antenna DVB → Antenna DVB-S (1 or Antenna DVB-T.
Software update wizard You can load the latest software for your TV set via satellite (1 or with the aid of a USB stick (see page 35).
Search wizard If, after the initial installation, you want to search for new stations, or if you have set up your antenna for the first time, then you can handle this task with the help of the search wizard (see page 24). You will find the search wizard in the TV menu under Settings → Stations → Search wizard.
An information display for each menu item The info display automatically shows content-based info texts in the upper part of the screen for each menu item. It forms a convenient operating system with the index (see page 15).
Connecting external devices The connection wizard ensures that all devices are correctly registered and connected. It is started automatically at the end of the initial instal lation wizard but can also be called separately (see page 37). You will find the connection wizard in the TV menu under Connections → New devices/modifications.
An index in the TV set The index gives you an overview of the functional scope of your TV set. You can also start wizards and menu settings directly from here (see page 16).
Connecting sound components The sound component wizard ensures that the components which repro duce the TV sound are correctly registered, connected and set. It is started automatically at the end of the initial installation wizard but can also be called separately (see page 41). You will find the sound components wizard in the TV menu under Connections → Sound components.

You can select your language for operating the TV set.
Index Language Integrated features Repeat initial installation * Access code ASSIST+ Automatic dimmer Automatic station programming
Select letter Page ↓↑

For your own safety and to prevent unnecessary damage to your device, read and comply with the following safety instructions:
The wrong voltage can damage the set. This equipment must only be connected to a mains power supply which has the same voltage and frequency as that specified on the rating plate; use the power cable provided. The mains plug of the TV set must be easily accessible so that the device can be disconnected from the mains at any time. When you unplug the mains plug, do not pull on the cable rather pull on the plug housing. The cable in the mains plug could be damaged and cause a short circuit the next time it is plugged in. Lay out the power cable in such a manner that it cannot be damaged. The power cable may not be kinked or laid over sharp edges, stepped on or exposed to chemicals; The latter also applies for the entire equip ment. A power cable with damaged insulation can cause electrical shock and is a fire hazard.
Proper use and environmental conditions
This TV set is intended exclusively for the reception and reproduction of video and audio signals and designed for the home and office. It may not be used in rooms with high humidity (e.g. bathrooms, saunas) or high dust concentration (e.g. workshops). The manufacturer‘s warranty is only valid for use in the specified permissible environment.
If the set is used outdoors then ensure that it is protected against mois ture (rain, splashing water, or dew). High humidity and dust concentration cause creep currents in the set. This can cause electric shocks or fires.
If you have brought the set into a warm environment from the cold, then wait for about 1 hour before switching it on to avoid formation of con densation.
Air circulation and high temperatures

Do not place any objects filled with liquid or burning candles on the de vice. Protect the set against dripping and splashing water.
The vent slots on the rear panel of the set must always be kept free. Please do not place newspapers or cloths on/over the TV.
At least 10 cm clearance must be left at the sides and top for air circulation if the TV set is placed or hung in a cabinet or a shelf.

Never place the TV set in a position where it is exposed to vibrations. This can lead to material overload.
Like any electronic device, your TV set requires air for cooling. Ob struction of the air circulation can cause fires.
When rotating the TV set there is a danger of crushing between the TV housing and the table stand. Makes sure that your fingers or other objects are not in this area when rotating the TV set.
The set is suitable for different instal lation solutions. See the instructions for assembly for the different instal lation solutions.
Only transport the device in vertical position. Grasp the device on the upper and lower edges of the housing.
Stand the TV set with the table or floor stand only on a level, sturdy, horizontal base. Particularly ensure that the set does not protrude to the front when placed in or on pieces of furniture.
The LCD screen is made of glass or plastic and can break if not handled properly. If the LCD screen is damaged and liquid crystal is leaking, wear rubber gloves for handling the TV set. If there is skin contact immediately wash thoroughly with water.
Set up the device where it is not exposed to direct sunlight and where it is not exposed to additional warming through heating elements.
Prevent metal items, needles, paper clips, liquids, wax, or similar items, from getting into the interior of the device through the vent slots in the rear panel. Such objects can cause short circuits in the set, which could possibly cause a fire.
If something should get into the interior of the set then immediately unplug the mains plug of the device and contact customer service for more information.
Power supply · Transporting · -

Environmental protection
Energy consumption Your TV set is equipped with an eco-standby power supply. In the standby mode, the power consumption drops to low power (see technical data on page 57). If you want to save even more energy then switch the device off with the mains switch. However note that in this case, EPG (Electronic Programme Guide) data will be lost, and it may be that programmed timer recordings cannot be executed via the TV device. If you activate the automatic dimming (see page 21) your TV picture adapts to the ambient brightness. This reduces the power consumption of the TV set.
Never remove the back of the TV set yourself. Only have your TV device repaired or serviced by authorized television technicians. Only use original accessories such as Loewe stands if possible (see Ac cessories on page 58).
Do not allow children to use the TV set without supervision or to play in the immediate vicinity of the TV set. The set could tip over, be pushed off or pulled down from the stand surface and injure someone. Do not allow the switched-on TV set to run unattended.
Packaging and box You have made a decision to purchase a high-quality technical product with a long service life. For disposal of the packaging, in accordance with national legislation we have paid a fee to a commissioned recycler to pick up the packaging from the dealer. Nevertheless we recommend keeping the original box and packaging material on hand so that the device can be transported with optimal protection if necessary.
Loud music can lead to ear damage. Avoid extreme volume especially over long periods and when using headphones.
Use only a soft, clean, damp cloth to clean the TV, screen and remote control, do not use any caustic or abrasive cleaning agents. Connect TV sets with a high gloss surface may only be cleaned with a soft, clean antistatic cloth.
The EU directive 2002/96/EC regulates the proper way to recycle, handle and utilise used electronic devices. Old electronic devices consequently must be disposed of separately. Please do not dispose of this device in normal household trash! You may return your used set free of charge at designated recycling centres or at your specialist dealer whenever you purchase a new, comparable set. Further details about returning (also for non-EU countries) are available from your local authorities.
Pull out the mains plug and all connected antenna cables from the TV set in a thunderstorm. Overvoltage caused by lightning can damage the set via the antenna system, as well as via the mains power. The mains plug and all connected antenna cables should also be pulled out during long periods of absence.
The batteries supplied as initial equipment do not contain any pollutants such as cadmium, lead, or mercury. Used batteries should no longer be disposed of in the do mestic waste according to the Battery Ordinance. Dispose of your batteries at no charge in the collection containers that are set up for this purpose in retail stores.
The TV set you have purchased with LCD screen satisfies the most rigor ous quality requirements and has been inspected relative to pixel errors. In spite of the utmost care in manufacturing the display, for technical reasons the possibility that some pixels will have defects cannot be 100% excluded. Please understand that these types of effects, as long as they are within the standard of specified limits, cannot be considered as a device defect in terms of the guarantee.

Installing the TV set
Connecting the TV set
Install as manually rotatable table unit with the Table Stand included. See accessories (page 58) for other installation options.
Connecting to the mains
Connect the TV set to a 220-240V power outlet:
First plug the small plug of the power cable into the power connection on the rear of the TV, then plug the large power plug into a mains power outlet.
Inserting or replacing batteries
Press the embossed arrow and push down the battery compartment cover.
Analogue / DVB-C- / DVB-T antenna:
In sets with DR+: Plug the antenna plug of the antenna or cable system or the room antenna into the ANT2 socket. The connecting cable between ANT-TV and ANT OUT has already been plugged in at the factory. In sets without DR+: Plug the antenna plug of the antenna or cable system or the room antenna into the ANT-TV socket.
Insert two alkaline manganese LR 03 (AAA) batteries; ensure that the + and – poles are correctly positioned!
Slide the cover up from below.

Satellite antenna, if upgraded:
AAA LR03
Connect one antenna plug each, for example, from the antenna switch or the Twin-LNC of the satellite system to the ANT-SAT and ANT-SAT2 sockets (only for sets with DR+). If you only connect one SAT antenna cable, connect it to ANT-SAT.

Adjusting the remote control for operating the TV set

Press the TV button.
See page 52 to find out how to operate other Loewe equipment.
Connections on the back of the set (see also page 5 and 6).
Connect network (only for sets with Network Mediaplayer)
Connection and configuration of the network connection is described in the Network Mediaplayer operating manual.
When using a CA module and a Smart-Card to receive coded stations, please observe the handling of the CA module (see page 34).
Connecting the antenna · 220-240V~ 50/60Hz · Receiving coded stations

Turning the set on/off
First installation wizard
Switching the TV set to standby mode
Initial installation after switching on for the first time This wizard starts automatically after the set is switched on for the first time, however it can also be called later manually in the TV index, see Repeat initial installation on page 16.
Actuate the mains switch on the bottom of the set.
The display in the control panel on the front of the set will be illuminated red, the set is now in standby mode.

First installation wizard Which language do you want to use for operation?
Switching the TV on/off on the control unit
Press the centre of the on/off button to switch the TV set on/off.
Initial installation Language Sprache D Kieli FIN Language GB Jezik SLO Langue F Jazyk SK Lingua I Lisan TR Idioma E Språk S Taal NL Sprog DK Jazyk CZ Idioma P Γλώσσα GR Язык RUS Język PL Språk N Nyelv H
Meaning of the display color: Red: Standby mode Green: TV set is switched on Orange: Radio mode, set receives EPG data or timer
Switching the set on with the remote control
The first step with the wizard starts when selecting the language for the user prompts. From this point on follow the instructions on your TV set.
Press the on/off button.
Brief explanation of button functions:
or: numeric buttons (0–99).
Press the ring (up, down, left, right) to move the cursor and to select settings.
or: TV button.
By pressing the OK button a setting is confirmed and you will go to the next step.
or: OK button – station list is called.
With the yellow button you can select or remove the indi vidual items (see the example below). When an element is selected, it is marked by a checkmark .
or: Assist button – Assist+ menu is called.
Switching the set off with the remote control
Use this button to go back one step.
Exit the wizard with the END button (if available).
Press the on/off button.

Initial installation Connect antenna cable(s) Antenna cable(s) for: to antenna socket(s): Antenna/cable (analogue) ANT TV DVB-T ANT TV DVB-C ANT TV DVB-S (cable 1) ANT SAT DVB-S (cable 2) ANT SAT2 Proceed Connect/disconnect Back
➠ Before switching off the set with the mains switch, we
recommend you to switch it to standby mode.
Switch on in Radio mode
Press R on the TV control unit.
An example of multiple selection using the yellow button.
or: Press the RADIO button on the remote control (radio mode, see page 36).
Display · recording active

Explanations of the setting possibilities, including the upgradeable satellite reception:
LNC frequencies Low Band /
Normally, you do not need to change the values for high and low band, unless the LNC (LNB) of your satellite system uses a different oscillator frequency (important for the frequency display). After you have made these settings, you should receive the picture and sound of the selected satellites (only with Astra1 and HOTBIRD).
Select the country for country-specific pre-settings. If UK or IRL is selected for the location of TV set, it is pos sible to activate MHEG-5 (UK Freeview) for the TV set. A dialogue appears, where you can confirm to set the operating software to the selected location. If Yes is selected and confirmed with OK, the TV set turns off and on again automatically. First installation starts again after activating the operation software. If MHEG-5 was activated, DVB-C and DVB-S can not be used anymore. Only terrestrial/cable and DVB-T stations are available.
If you want to run the station search independently of the channel grid, select frequency search for the search method.
The symbol rates are specified by the satellite provider and do not normally need to be changed.
Select the signal source from a list, the station of which is to be at the top of your station list (starting with station slot 1).
Antenna/cable (analogue): analogue stations via cable/antenna DVB-T: digital, terrestrial stations DVB-C: digital stations via cable DVB-S (line 1): digital stations via satellite DVB-S (line 2): digital stations via satellite
Start the automatic station search with OK. First Tv stations, then radio stations are searched for. The stations found in the automatic search are divided into the appropriate station blocks depending on the previously selected antenna cables (signal sources). Subsequently the stations can only be re-sorted within these blocks. At the beginning of the station list you will find the block with the stations of the preferred signal source. Any mixed sorting of stations from different signal sources is only possible with the favourites list.
You can state whether coded stations are to be searched for in the search/update. Select yes then coded stations are also searched for. However, these stations can only be received in connection with a CA module and the appropriate Smart Card. Handling of the CA module is described on page 34.
If you are using an active antenna, then select yes (5V) for the antenna power supply.
➠ For TV sets with MHEG-5 software the stations are
tied to “Logical Channel Numbers” – “LCN” and sorted from 1-799. Digital stations without “LCN” are stored from 800 onwards. Analogue stations are stored from 1001.
The conventional settings will be derived from the selec tion of set location. Only change this if you know other symbol rates and modulation types or if you have to spec ify the network ID for your cable network (information available from your cable network provider). If you want to run the station search independently of the channel grid, select frequency search for the search method.
Then the connection and sound component wizard starts which helps you to log in, set and connect video recorders, decoders, a loudspeaker system or a HiFi/AV amplifier to your TV set. DVD players and DVD recorders are already registered at the factory. You can start the connection wizard and the sound components wizard manually later and add new devices. Further information is available from page 37 (Connection wizard) and page 41 (Sound components wizard).
Select which satellite(s) you receive from a list. For more than one satellite, select the type of your changeover switch or communal satellite system additionally. Ask your dealer in this regard.
Specify here whether the high band of the selected satel lite is to be searched in addition to the low band.

If you have logged in and connected a recorder in the connection wizard, the Digital Link Plus transmission starts when the sound component wizard closes. If a Digital Link Plus compatible recorder is connected, the station list of the analogue stations is transmitted to the external recorder. You can also call Digital Link Plus manually under TV menu → Connections → Digital Link Plus.
Positioning/aligning the DVB-T antenna If you receive one or more DVB-T stations with picture or sound interfer ence, you should change the position and alignment of the antenna. Ask your dealer to tell you which channels are used to broadcast the DVB-T stations in your region.
➠ In normal TV mode, without other displays.
A DVB-T station is received and selected.
Explanations of the DVB-T antenna:
Call TV menu.
34 Select Settings, 6 go to the menu line below.
With good reception conditions a room antenna can be used for DVB-T (socket ANT2).
Under less favourable reception conditions, an active antenna is recommended which must be set accordingly in the first time commissioning or in the TV menu → Con nections → Antenna DVB → Antenna DVB-T (see DVB-T Antenna on page 13).
34 Select Stations, 6 go to the menu line below.
34 Select Manual adjustment, OK call manual adjustment.

If the location is outside of the normal transmission range then a unidirectional antenna can be used to improve reception quality.
Signal source Select the area in which you want the broadcaster to search here. You can use the button to automatically select station by station.
Manual adjustment SIgnal source DVB-T DVB-C DVB-S A Channel E05 Frequency 177.50 MHz Bandwidth 7 MHz Name 12 Test C/N 81 Level 80 BER 0 E-7
The signal source is already on DVB-T due to the station preselection.
Position and align the antenna in such a manner that maximum values for C/N and Level are obtained.
Blue button: Start search.
Search for DVB-T stations one after another and compare values for C/N and Level. Then position/align the antenna to the weakest station so that maximum values for C/N and Level are obtained.
Thereafter perform an automatic search for all DVB-T stations, see page 24.
Explanation of the setting possibilities:
Depending on the selected channel and country the associated bandwidth of 7 or 8 MHz will be set auto matically.

General information on menu operation Menus for the individual operating modes (TV, Radio, PIP, EPG, Teletext, PhotoViewer, MusicBox and Digital Recorder, if installed) are called with the MENU button. Other menus can be opened with other buttons on the remote control. The menus are displayed at the bottom of the screen. At the top you get additional information about the selected menu item (see info display on the right).
The info display The info display shows a content-based info text for each menu item at the top edge of the screen to aid you in making the settings. In conjunc tion with the index it makes a convenient control system.
➠ A menu is displayed.
The factory setting is that the info display is shown auto matically for each menu item. In this case you can tempo rarily hide the info texts with the INFO button.
➠ In normal TV mode, without other displays.
Call TV menu.
The automatic info display can be hidden via a menu setting. Then it can be displayed temporarily by pressing the INFO button.
Picture Here you can adjust among other things: Contrast, colour, brightness, picture adjustment, sharpness, picture format.

Settings Here, you can search for stations automatically or manually as well as set the menu language, timer functions, parental lock, on-screen displays, etc.
Sound Connections Recording Settings Picture TV menu
Picture adjustment ...
Sound Picture ections Conne Recording Settings
Stations ...
34 Select Picture, 6 go to the menu line below.
An INFO icon at the bottom right above the menu bar also tells you that an info text is available. If a several page info text is available, Page↓↑ is display ed in the info window and you can scroll through the individual info pages with and .
34 Select Brightness, 6 go to the menu line below.
34 Set Brightness.
Permenantly display or hide the automatic info display Once you have become familiar with how to operate the TV set, you can switch off the automatic info display.
Return to the Brightness menu line
to make other picture settings.
34 Select more ..., OK call more ... functions.
➠ In normal TV mode, without other displays.
34 Select Auto format, 6 go to the menu line below.
Call TV menu.
34 Select Settings, 6 go to the menu line below.
34 Select on / off.
Conclude the settings.
34 Select Miscellaneous, 6 go to the menu line below.
Inputs with the numeric buttons
Letters have to be entered for specific functions. Like using a mobile phone keypad (1 to 9), press a numeric button until the desired character appears. The available letters are printed on the individual numeric buttons.
34 Select On-screen displays, 6 go to the menu line below.
34 Select Automatic info, 6 go to the menu line below: yes / no.
TV menu

The index in the TV set You can start all wizards and many operating functions directly from this point. The complete function scope of the TV set can thus be easily understood. Alphabetic sorting is preceded by the items Language, Integrated features and Repeat initial installation.
The Assist+ menu The most important additional functions of the TV set can be called directly by the Assist+ menu.
Call Assist+ menu.
56 Select additional functions. OK calls the function.
➠ In normal TV mode, without other displays.
Call Index.

You will see an info text for the highlighted keyword in the info display. If MHEG-5 is active, call the status-display with INFO and press INFO again for index.

You can select your language for operating the TV set.
Index Language Integrated features Repeat initial installation * Access code ASSIST+ Automatic dimmer Automatic station programming
Description of the individual functions:
TV mode see page 18 onwards.
Radio digital mode see page 36.
If an OK symbol appears in the marked line, this function can be called directly with OK.
Teletext mode see page 32 onwards.
DR archive, if TV set is equipped with Digital Recorder, see Digital-Recorder operating manual.
PhotoViewer see page 46 onwards.
Enter initial letters with the numeric buttons like with a mobile phone keypad (see page 15).
MusicBox see page 48 onwards.
or go with:
MediaNetwork, if TV set is equipped with Network Me diaplayer, see Network Mediaplayer operating manual.
34 to the preceding / next letters, 65 from line to line,
Index see left column.
P+/P– scroll backwards or forwards in whole pages.
setting with OK.
Call Assist+ · Call index · Selecting a keyword

TV menu – Overview diagram
Picture Sound Connections
Settings
Picture adjustment Contrast Colour intensity Colour temperature Brightness Sharpness Digital Noise Control (DNC) more...
Sound effects Sound adjustment Headphone volume Loudness more...
Manual adjustment Change stations Select/change favourites
Digital Link Plus Miscellaneous
Parental lock Timer functions
Manual adjustment of AV standard Assign digital audio input Allow switching voltage RGB insertion at AV2 Remote TV switch on via Digital Link HD
Switch off times (4
Auto volume AV output signal Maximum volume Switch on volume Volume adjustment for current station Balance
Image+ Picture format Move picture up/down (3
Wake up with Wake up signal volume
Auto format Film quality improvement (DMM) Automatic dimmer
Menu Subtitles (DVB) Audio (DVB)
Timer list Pre-record time Post-record time
On-screen display time On-screen display position Volume Automatic info
Time Deviation from Universal Time Date Beginning of daylight-saving time End of daylight-saving time
Sound effects Sound adjustment Headphone volume Loudness more...
Switch off times (4
Manual adjustment Change stations Select/change favourites
Wake up with Wake up signal volume
Subtitle mode Audio mode DVB character set
(1 A wizard is started here. (2 Menu items only appear for analogue stations. (3 Menu item only appears for certain picture formats (see page 22). (4 List of individual menu items. (5 Menu item only appears when a CA module is plugged in (see page 34). (6 Menu item only appears if a stand with motor drive is used (see page 58). (7 Menu item only appears in sets with DR+ or with logged in external recorder. (8 Menu item doesn´t appears for analogue stations. (9 Menu item only appears with certain settings in the audio component wizard (see page 20).
Auto volume Maximum volume Switch on volume Volume adjustment for current station Balance
Activate switch-off position Set switch-off position Basic adjustment

Select station
With the station list
➠ In normal TV mode, without other displays, no favour
With the keys P+ and P - on the remote control
ites selected:
P+/P– station up/down. The station display with sound identification is displayed briefly.
OK call Station list.
➠ If favourites are selected, the station in the favourites list
COMP. IN HDMI1/DVI HDMI2/DVI VGA AVS DVD VCR 0 VIDEO 1 Das Erste 2 ZDF 3 WDR Köln 4 Bayrisches FS
5 hr-fernsehen 6 Phoenix 7 BR-alpha 8 3sat 9 EinsExtra 10 EinsFestival 11 EinsPlus 12 ZDFinfokanal 13 ZDFdokukanal 14 ZDFtheaterkan 15 arte 16 DAS VIERTE
is switched over with P+/P– (see page 19). ➠ If other languages or DVB subtitles are available on DVB
stations, the language and subtitle selection is displayed under the station display. See also page 23: Additional selection possibilities for
DVB stations.
21:00 - 21:45 Urlaubsparadies - Toskana
Switch to ... Select station Favourites
Scan stations Change stations Sort alphabetically
With the numeric keys of the remote control
P+ P–
1-digit stations Keep the numeric button pressed for one second, the station changes immediately. or: Press numeric button briefly, the station changes after 2 seconds (immediate change for up to 9 stored stations).
P+/P– scroll in the pages of the station list.
78 Jump to the next station block.
5634 Mark stations.
or: Enter the number of the station with the numeric buttons. The marked station is shown as a small picture.
2-digit and 3-digit stations Press first (and second) numeric button briefly. Keep the last numeric button pressed for one second, the station changes immediately. or: Press all the numeric buttons briefly, the station changes after 2 seconds (changes immediately if up to 99 or 999 stations are stored).
OK the marked station is called.
alphabetical.
4-digit stations Press all four numeric buttons, the station changes imme diately.
Das Erste DSF DVD DVD-REC
Bayrisches FS BR-alpha BR
EinsExtra EinsFestival EinsPlus Eurosport
➠ If favourites are selected, you can switch to the station
in the favourites list with the numeric buttons (see page 19). Maximum two-digit station numbers are possible. ➠ When you select an empty memory location, the TV
21:00 - 21:45 Urlaubsparadies - Toskana Scan stations Change stations Sort numerically
Switch to ... Select letter Favourites
P+ P–
switches to the next available station.
Enter initial letters with the numeric buttons like with a mobile phone keypad (see page 15). The first station for the specified letters is marked.
Call last viewed station (for TV sets with MHEG-5 software)
56 You can switch back and forth quickly between
two stations using this buttons.
5634 Mark stations. OK the marked station is called.

With the favourites lists
Explanation of the icons following station names: Digital DVB-T station (terrestrial via antenna) Digital DVB-C station (via cable) Digital DVB-S station (via satellite) Coded station
You can save and call your favorite stations in 6 favourites lists (e.g. for multiple users). Each favourites list can contain up to 99 stations. After initial installation, 10 stations from the station list are already stored in the first list. Change the favourites list to suit your requirements (see Put together / change favourites lists on page 27).
➠ In normal TV mode, without other displays.

➠ Please make sure that the appropriate devices have been logged in
with the device wizard (see page 37).
With the AV selection
Call AV selection.
1 Das Erste 2 ZDF 3 WDR Köln 4 Bayrisches FS 5 hr-fernsehen 6 Phoenix 7 BR-alpha 8 3sat 9 EinsPlus 10 EinsExtra 11 MTV 12 VIVA
OK DVD-REC DVD AV selection
34 Select desired device or connection, OK to switch over.
A signal from the selected video source should now be visible.
With the station list
➠ In normal TV mode, without other displays.
OK call the station list. If the favourites list is displayed, switch to the
station list first.
P+/P– scroll in the pages of the favourites list.
The connections or devices are always at the top of the list in numerical sorting. In alphabetic sorting, the connections or devices are sorted in alphabetically.
34 Select other favourites list.
➠ Other favourites lists can only be selected if these
contain stations.

OK the marked station is called.
COMP. IN HDMI1/DVI HDMI2/DVI VGA AVS DVD VCR 0 VIDEO 1 Das Erste 2 ZDF 3 WDR Köln 4 Bayrisches FS
5 hr-fernsehen 6 Phoenix 7 BR-alpha 8 3sat 9 EinsExtra 10 EinsFestival 11 EinsPlus 12 ZDFinfokanal 13 ZDFdokukanal 14 ZDFtheaterkan 15 arte 16 DAS VIERTE
Red button: Back to the station list. Green button: Scan all stations of the currently selected
favourites list. Yellow button: Change the Favourites lists, see page 27.
Explanation of the favourites lists: The selection made with the red button (favourites list) is retained until you switch back to the station list with the red button. If favourites are selected, the name of the favourites list appears in the status display after the station name after changing stations.
5634 Select connection/device. OK to switch over.

Adjusting the sound
Explanations of the sound settings:
Playback over the TV speakers, active speakers, Loewe Auro, Loewe Sound Projector or an external hi-fi amplifier. The selection active speakers, hi-fi/AV amplifier or Sound Projector is only possible if these have been logged in in the audio component wizard. The Auro selection is only possible if a Loewe DVD Preceiver Auro is connected. The menu item Sound via does not appear if TV speak ers or TV speakers + active subwoofer is set in the audio components wizard.
Sound off; Sound on: Press button again or set volume V+.
V+/V– volume louder / quieter.
The volume bar will be shown briefly if no other menu is displayed.
Set sound effects Stereo, Panorama, 3D Surround. Panorama gives the stereo sound a virtual base widen ing. 3D Surround converts a stereo signal into a virtual surround signal.
Call Sound adjustment.
Speech, Classical, Pop, Custom music and film sound. You can set the treble and bass for music and movie sound.
Classical Sound adjustment ...
Speech off Pop Custom music sound
Select sound adjustment by pressing several times. or:
Headphones vol.
Adjust the headphones volume.
Proper boost of bass and treble tones at low volume.
34 Select sound adjustment.
more ...
call with OK.
Selection possibility Mono/Stereo or Sound 1 or Sound 2 for two-sound broadcasts separately for speakers and headphones. Only available with analogue stations.
Other sound settings in volume setting and sound adjustment
➠ As long as the volume bar or the selection of the sound
adjustment is still visible:
Reduces volume differences, e.g. for advertisements that are too loud.
5 Call additional sound settings.
Sound selection for two sound broadcasts.
Sound adjustment Sound effects Volume 24 Headphone vo
Determining the maximum volume that can be set.
34 Select sound setting, 6 Go to the menu line below.
Specify the volume that is set when switching on the TV set with the power switch. This does not affect switching the set on from standby mode.
34 Make changes.
Sound settings via the TV menu
The volume can differ according to the individual stations. If the sound is too loud or too quiet in relation to other stations, adapt the volume. When the menu is open, you can select the stations one after another with P+/P– and adjust every single station conveniently.
➠ In normal TV mode, without other displays.
Call TV menu.
34 Select Sound, 6 go to the menu line below.
Set Stereo balance so that the volume impression is identical on the left and right.
34 Select desired sound setting, 6 Go to the menu line below.
34 Make changes.


OK Picture adjustment Picture (personal values, TV digital) TV menu
Standard values (TV digital) Personal values (TV digital)
34 Select desired values for picture, OK call selected values for picture.
34 Select Picture, 6 go to the menu line below.
Explanations for Picture adjustment: Custom adjustments of contrast, colour intensity, colour temperature, brightness, sharpness and digital noise supression are saved in the custom values. Every signal source (TV analogue, TV digital, HD analogue, HD digital, PC, PhotoViewer) has its own personal values. By selecting Standard values the picture parameters are reset to factory values for the respective currently active signal source. See the glossary for an explanation of the signal sources: Signal input groups. In the index of the TV set, all the picture and sound adjustments can be reset to the factory values for all signal sources in one step under Reset picture/sound or Factory settings picture/sound.

Picture (standard values, TV digital) TV menu
Contrast C Colour intensity Picture adjustment
Standard values (TV digital) ...
34 Select the desired picture function, 6 go to the menu line below.
34 Make changes.
Explanations of the picture settings:
Switches the picture parameters between standard and personal values. Adjust contrast. Adjust the colour. Set warmer or colder tone for picture.
Changing the station on the TV set
Adjust the brightness of the picture. Adjust the contour sharpness of the picture. Removes or reduces the signal noise in the picture.
+ / – Station up/down.
Switching radio on or off or switching to radio
more ... Image+ Picture format
Call with OK. Picture improvement on/off and Demo mode for Image+. Set picture format (see page 22). Move picture vertically (see page 22).
R Radio on, or switch between TV and Radio.
Automatic detection and setting of the picture format for Cinemascope or widescreen movies. Reduce jolting. The TV picture adapts to the ambient brightness. The power consumption of the TV set is also reduced.
Calling the TV menu on the set
M call Direct control on TV set menu,
Brightness Volume Direct control on TV set
19 Contrast Picture format Stat election
– / + Select function.
Standard / personal values for picture adjustment
➠ Service is intended for the customer service.
Call TV menu.
M or R Go to the menu line below, – / + Make changes.
34 Select Picture, 6 go to the menu line below.
M go up one menu line, – / + Select other function.
34 Select Picture adjustment, 6 go to the menu line below.

Button functions Every operating mode of the TV set (TV, Radio, Teletext, EPG, PIP, PhotoViewer, MusicBox and DR archive, if equipped with Digital Recorder) has its own menu and own functions for the coloured buttons. The function of the coloured buttons is shown at the bottom of the menus and wizards. Below, some of the function are listed which you need in TV mode for the daily handling of your TV set.
Selecting the picture format
Press the Picture format button until the desired picture format is set or with
34 to select the desired picture format.
The Panorama picture format can be set between proportionally correct and format filling display. Black bars are visible on the left and right of the picture in the prportionally correct display. Switch: Keep the M button on the TV pressed, at the same time, press the Picture format button on the remote control briefly. Reset: Press the same button combination again.
Functions of the coloured buttons in TV mode
➠ The coloured buttons do not work as described below
for TV sets with MHEG-5 software, but they operate as described on page 33 (Digital Teletext). Red button: Freeze on/off In sets with Digital Recorder: DR archive on/off. For TV sets with MHEG-5 software you can open the DR archive via the menu Assist+ (see page 16). Green button: Open the Teletext functions menu.
Explanations of the picture formats:

➠ The setting options depend on the transmitted picture
on, with normal size ... Teletext subtitles Personal text pages Teletext functions
content. 16:9 Proportionally correct display of 16:9 broadcasts. 4:3 Proportionally correct display of 4:3 broadcasts. Panorama Proportionally correct or format filling display (as-delivered
34 Select Teletext subtitles or Personal text pages. 6 Go to the menu line below in Teletext subtitles. 34 Select the size of the Teletext subtitles, OK show Teletext subtitles. (display only if subtitles are available). END: Teletext subtitles off or select off in menu. OK in Personal text pages calls the teletext pages or
state) of 4:3 broadcasts on the 16:9 screen. Station logo and subtitles remain visible. See above for switching the Panorama mode. Cinema Proportionally correct, format filling display of 4:3 broad
casts on 16:9 screens. Station logo and subtitles usually not visible. Zoom Proportionally correct display. Maximum picture magni
the teletext page directly if only one page is noted (for defining pages, see page 33).
Yellow button: Go to the last viewed station. Use this button to quickly switch back and forth between two stations. For MHEG-5 see page 18 or on this page at the right lower column. Blue button: Show programme info. For MHEG-5, no programme info is available.
fication. PALplus Is a 4:3-compatible 16:9 picture broadcast supplied by
the station which is detected automatically.
If a high resolution video signal is displayed on the TV set or fed in via the interfaces PC IN, HDMI1/DVI, HDMI2/DVI oder COMP. IN, the picture formats 16:9 TV, 4:3 TV and 16:9 PC, 4:3 PC and Zoom can be set.

➠ In normal TV mode without other displays.
56 Move picture up/down.
To show subtitles or news tickers which have been cut off, the picture can be moved up or down in the picture formats Panorama, Cinema and Zoom (not with high resolution signal) with the arrow buttons 56.
Detailed info (teletext) Programme preview Detailed info Programme info 14:43
Permanent display of time
Press twice in rapid succession,the time is displayed permanently.
➠ For TV sets with MHEG-5 software you can switch
back and forth quickly between two stations using these buttons (see also on page 18).
14:42
K or END: Hide time.
Move picture vertically

Additional selection possibilities for DVB stations In the status display additional selection possibilities can be offered for specific programmes depending on the DVB programme provider.
➠ In normal TV mode, without other displays.
END: Show/hide status display. For MHEG-5, INFO-button.
➠ The coloured buttons do not work as described below
for TV sets with MHEG-5 software, but they operate as described on page 33 (Digital teletext).
1 Das Erste Dolby Digital 2 14:30 - 15:15 Toskana Language-/sound selection
14:42 Alarm time 20:00 Sleep timer 23:00
➠ If you press one of the coloured buttons or the TEXT
button while the status display is on, the appropriate selection menu is displayed.
You will see the number and name of the station and the title of the current broadcast (if available) and the sound identification in the top two lines. A selection (see right hand column), the time and, if acti vated, the alarm time and switch-off time appear at the bottom depending on the DVB station.
➠ The selection line is also displayed automatically when
a new broadcast with different options to the previous broadcast begins or when you switch stations.
The following options are possible:
Explanations of the sound identification:
Transmitted audio signal: Mono Mono audio transmission analogue 2-sound Two sound broadcast (Sound1/Sound2) analogue Stereo Stereo sound transmission analogue or digital (PCM) Dolby Digital Dolby Digital sound transmission (DD) dts dts sound transmission MPEG MPEG sound transmission ProLogicII Dolby Pro Logic II sound transmission
The selection menus are only available as long as the sta tus display is shown. However, you can call them again by pressing the END button.
Used loudspeakers: 2 Playback via TV loudspeakers (L/R Stereo).
Other setting options for DVB stations You can make general presettings for DVB stations under TV menu → Settings → Miscellaneous → DVB settings.
Here you can preset whether a subtitle is always to be displayed as soon as it is offered by the station. A special subtitle for impaired hearing can also be selected. Subtitles are not offered by all stations. Many stations only broadcast subtitles by teletext.
Here you can preset whether you always want to hear a special sound for impaired sight as soon as it is offered by the station.
Select the DVB character set so that the title of the broad cast of your favourite received station or the texts of your CA module are displayed correctly.

TV stations Various options for managing stations are available via the TV menu. For example the description for TV stations. For radio stations the same applies, except that the Radio menu is called in Radio mode (see also page 36). ➠ Station management is not possible if a programmed timer recording
Explanations of some search settings:
Select the country for country-specific defaults and sta tion sorting.
Here select antenna, cable, or satellite, depending on where you want to search for new stations. Here you can also call a configuration of the DVB-T and DVB-S antennae with the green button (see page 13).
is still pending.
Search/update stations – Search wizard In the search/update with the search wizard, new stations are searched for which have not yet been stored.
Antenna/cable:
With selection of set location the conventional TV standard/colour standard is the default. This should only be changed if stations with other standards are to be searched.
➠ You have to repeat the initial installation (see page 12)
and automatically search for new ones if you want to delete all the existing stations and automatically search for new ones. Do also use the first installation if you want to change to receiving MHEG-5 stations (attend restrictions for DVB software update, see page 35).
You can state whether coded stations are to be searched for in the search/update. Select yes then coded stations are also searched for. However, these stations can only be received in connection with a CA module and the ap propriate Smart Card. Ask your dealer which Smart Card you need to receive certain stations. Handling of the CA module is described on page 34.
Call TV menu.
34 Select Settings, 6 go to the menu line below.
If you want to run the station search independently of the channel grid, select frequency search for the search method.
34 Select Stations, 6 go to the menu line below.
34 Select Search wizard, 6 go to the menu line below.
With the selection of set location the conventional set tings will be preset. Only change this if you know other symbol rates and modulation types or if you have to specify the network ID for your cable network (informa tion available from your cable network provider). If you want to run the station search independently of the channel grid, select frequency search for the search method.
In the upper info text the current search settings will now be displayed:
Search wizard Your TV carries out the update of the station range (search for new stations; delete stations no longer broadcast) with the following settings: Location of TV set United Kingdom Signal source DVB-T
If you want to run the station search independently of the channel grid, select frequency search for the search method. The symbol rate is specified by the satellite provider and does not normally need to be adjusted.
TV menu Settings Stations
Start search/update Change search settings Search wizard
If you want to change these search settings:
34 Select Change search settings, OK wizard prompts search settings.
If you agree with these settings:
34 Select Start search/update, OK start search.
Red button: Abort current search/update.

Search for/update stations – handling of new and no longer found stations After the automatic search/update has been completed, the number of new found stations is displayed.
Search/update station – manual search
Call TV menu.
34 Select Settings, 6 go to the menu line below.
OK List of newly found stations.
34 Select Stations, 6 go to the menu line below.

Search wizard All stations marked with a are saved. Note: The newly found stations which you have already deleted are not marked.
34 Select Manual adjustment, OK call input box.
Search for/update station Newly found stations WDR-Köln EinsFestival MDR S-ANHALT Test-R ARD-Online-Kanal ARD-TEST-2 ARD-TEST-1 MDR THÜRINGEN
You can enter or edit the station data in the following lines:

Manual adjustment Signal source Antenna/cable (analogue) DVB-T DVB-C D Channel S21 Frequency 303.25 MHz Name KIKA TV stand. B/G Col. standard Autom.
Or: Blue button: Starts Search and searches for next station. Red button: Stores station.
OK saves the marked station.
Afterwards, if available, a list of the stations which are stored but temporarily not broadcasting or which no longer exist is displayed. The number of the used memory location is in front of the station. Please select the stations you want to delete permanently.
➠ Only the stations for the selected signal source are
stored which are not available in the station list.
➠ Stations which are already available for the selected
signal source in the station list are displayed with grey shaded station number and name. These stations can only be overwritten with the red button.

Search wizard The following stored stations were no longer found because they are not currently broadcasting a programme or no longer exist. Please mark those you want to delete completely. Those not marked are retained.
Explanations of some search settings: Various settings are possible depending on the selected signal source. Some settings have already been explained in first-time operation (see page 12 onwards).
Search for/update station Stations no longer found 112 S36 127 Test-R 134 TVOTEXT 142 ARD-Online...
Selection of the range in which you want to search for the station.
Direct input of the channel.
Direct input of the station frequency.
TV stand.
Input of the TV standard of the station, (B/G, I, L, D/K, M, N). Ask your dealer in this regard.
Col. standard
Input of the colour standard of the station, (PAL, SECAM, NTSC-V, PAL60, Autom.). Ask your dealer in this regard.
OK deletes the selected stations.
END: Exit search wizard.

Change, delete, move, rename, restore station
➠ Change station can also be called via the station list
➠ Not possible for MHEG-5 stations. ➠ DVB stations which also transmit the station name
(page 18).
cannot be renamed. In this case, the Rename function is hidden.
Call TV menu.
34 Select Settings, 6 go to the menu line below.
Blue button: Starts Rename station.
34 Select Stations, 6 go to the menu line below.
Under the 1st letter of the name you will see a line indicating the current input position. Input position one position to the right (also for
34 Select Change stations, OK call list of stations.
blanks). Input position one position to the left (deletes the

Change stations Here you can move stations, delete stations, restore stations you have deleted and enter and change names of analogue stations.
character).
Enter the letters one after another with the numeric buttons on the remote control. Like using a mobile phone keypad, press a numeric button until the desired charac ter appears. The available letters are printed respectively on the buttons. Different special characters can be selected with button 1.
13 WDR 3 14 BR 15 HR 16 MDR 3 17 KIKA 18 PHOENIX 19 BR-ALPHA 20 3SAT 21 KABEL 1 100 Das Erste 101 ZDF 102 WDR Köln Page ↑↓
1 ARD 2 ZDF 3 SAT.1 4 D Vierte 5 RTL 6 VOX 7 S-RTL 8 N-TV 9 DSF 10 EinsPlus 11 9Live 12 RTL2
Green button: Switch upper/lower case letters.
OK to save new name.
In this menu you can delete, move, rename or restore stations. 3456or numeric buttons: to select the appropriate station. Scroll with P+/P– if necessary.
Restore stations Stations which have been deleted from the station list can be restored.

Red button: Starts Delete station. 56 Select several stations to be deleted if necessary, OK to execute the delete.
Change stations Restore stations 3sat KIKA ZDF ZDFinfokanal ZDFdokukanal ZDFinfokanal Eurosport NONAME RTL Phoenix BRalpha NDR FS HH
Das Erste Das Vierte RTL Television 9Live WDR Köln VOX ProSieben Super RTL n-tv DSF RTL2 KABEL1
Move station / Change order
➠ Not possible for MHEG-5 stations. ➠ Stations can only be resorted within the signal source
block.
Yellow button: Starts Move station. 56 mark several stations if needed, OK selection ended, 56 Select insertion position from which the selected
The restored station is sorted in at the end of the respec tive signal block according to its signal source.
stations are to be inserted, OK to execute the move.
Rename station · Delete station

Put together / change favourites list
Add station to favourites list
➠ All stations (left column) must be selected.
Each favourites list can contain up to 99 stations. You can put together the favourites lists to suit your requirements (e.g. topic lists). Other persons using this TV set can create their own favourites lists. The favourites lists also have the advantage that the stations of different signal sources can be stored in the order you wish.
If not, change the list with 3.
P+/P– Scroll in the pages of the station list if necessary.
➠ Change favourites can also be called via the favourites
56 Mark station or select the station with the numeric buttons (enter the initial letters in case of alpha betical station order) which you want to enter in the favourites list.
list (page 19).
Call TV menu.
34 Select Settings, 6 go to the menu line below.
OK transfers the station to the favourites list.
The new station is inserted at the end of the favourites list. Proceed in the same manner with additional stations.
34 Select Stations, 6 go to the menu line below.
34 Select Select/change favourites, OK calls list of all stations and last active favourites list.
Delete station from favourites list

➠ Favourites list (right column) must be selected.
If not, change the list with 4.
1 Das Erste 2 ZDF 3 WDR Köln 4 Bayrisches FS 5 hr-fernsehen 6 Phoenix 7 BR-alpha 8 3sat 9 EinsExtra 10 EinsFestival 11 SAT.1 12 RTL
1 Das Erste 2 ZDF 3 WDR Köln 4 Bayrisches FS 5 hr-fernsehen 6 Phoenix 7 BR-alpha 8 3sat 9 EinsExtra 10 EinsFestival 11 SAT.1 12 RTL
56 mark station to be deleted. OK removes the marked station from the favourites list.
or:
Red button: Starts Clear favourites list.
Select station Next favourite list Clear favourite list Change sorting Page ↑↓
OK confirms clear favourites list.
Move / change order of stations in the favourites list
➠ Favourites list (right column) must be selected.
If not, change the list with 4.
56 mark station to be moved.
➠ Favourites list (right column) must be selected.
If not, change the list with 4.
Yellow button: Starts Move station.
Blue button: Starts Rename favourites list.
56 Select insertion position at which the selected
Numeric buttons: Enter new name (same procedure as under Rename station, see page 26).
station is to be inserted.
The insertion position can also be selected with
the numeric buttons.
OK to save new name.
OK to execute the move.
Rename favourites list

Picture in Picture (PIP) The concurrent display of two different images is referred to as Picture in Picture.
Swap contents of PIP and main picture
➠ The frame is green,
if not, press the green button.
➠ The coloured buttons do not work as described below for TV sets with MHEG-5 Software , but they operate as described on page 33 (Digital Teletext). ➠ A concurrent display of two HDTV signals is not possible. ➠ A concurrent display of two coded stations is not possible. ➠ Picture change and station selection is restricted during recording. ➠ In sets without Digital Recorder DR+, the PIP mode is restricted to AV-PIP
Yellow button: swaps contents of TV picture and PIP picture.
Select the PIP picture
➠ The frame is green,
if not, press the green button.
Select the station as usual.
(one TV station and one AV source). If a satellite tuner is upgraded in these sets, PIP mode from digital satellite picture and analogue picture via cable TV or house antenna is possible additionally.


Your TV set distinguishes between two PIP displays: Split Screen In this case screen is divided in the middle and the additonal
PIP image is shown on the right side of the screen. Both images are compressed horizontally and each gets half of the screen. Small PIP In this case a small PIP image is inserted in the TV picture.
2 ZDF 17.00 - 18.30 Flora & Fauna
The PIP operation distinguishes between two functionalities: Standard PIP Stations freely selectable and changeable for PIP and TV
Select the station for the main picture
picture (coloured buttons have PIP-specific meaning, see below). iPIP Only in sets with Digital Recorder: The TV picture is moved
➠ The frame is white,
if not, press the green button.
Select the station as usual.
to the PIP picture when you press the PIP button. The sta tion of the TV picture is now freely selectable. When you press the PIP button again, the PIP picture returns to the TV picture and the PIP window closes.

Start and end picture in picture mode
Show/hide PIP.
In the Standard PIP function a green frame indicates that the station selection acts on the PIP picture. A white frame means that the operation refers to the main picture. If the frame is blue, the station play is active in the PIP picture. If the iPIP function is activated, this is indicated by an orange frame.
1 ARD 17.30 - 20.00 Toskana
➠ For TV sets with MHEG-5 Software, you switch from the green bar/frame to the white by using the PIP key. The next time you press the PIP key, PIP is switched off.
Scan station in the PIP
➠ The frame is green,
if not, press the green button.
Blue button: Start Scan stations. The frame turns blue, the stations now change automatically.
➠ The frame is green, if not, press the green button.
Blue button: Stop Scan stations. The frame is green again.
Red button: Freeze picture in PIP on / off.

Configure Picture in Picture (PIP) mode In the PIP menu you can set the PIP type (Split Screen or Small PIP), the PIP function (Standard PIP or iPIP) and the position of the small picture.
Change position of the PIP small picture
➠ Nothing else is displayed on the screen apart from the
status line.

➠ PIP mode started,
if not, press PIP button.
➠ The frame is green,
if not, press the green button.
Call the PIP menu.


5634Move the PIP into a corner of the screen.
The position of the small picture can also be selected under Position in the PIP menu.
TV menu Settings PIP
Switch to iPIP / Standard PIP function
➠ PIP menu open.
Split screen ... Type
Switch to Small PIP / Split screen
➠ PIP menu open.
TV menu Settings PIP
34 Select Functions, 6 go to the menu line below.
TV menu Settings PIP
34 Select iPIP or Standard PIP. In iPIP the frame around the PIP picture is orange.
iPIP operation:
34 Select Type, 6 go to the menu line below.
When the iPIP function is set, the currently displayed picture becomes the PIP picture on pressing the PIP button. You can select other stations for the TV picture and still keep an eye on the PIP picture. You can tempo rarily “ban” commercials or programme sections to the PIP picture in this way.
34 Select Small PIP or Split screen.
The PIP picture becomes the TV picture again (PIP off).

Electronic Programme Guide – EPG EPG stands for Electronic Programme Guide and provides you with on-screen programme details. With the system, as with a printed pro gramme guide, you can learn about the current programme. In addition programmes can be sorted according to certain topics, memorised, and also recordings can be programmed.
Adjusting the programme list
➠ The selection is at the top of the specifications,
if not, press the blue button.
65 Select Date, Time, Stations or Topics. 34 Select defaults within the respective line.

Starting and ending EPG
Switching EPG on / off
arte 15:57-16:59 Charmed - Zauberhafte Hexen Das Erste 16:00-16:10 Tagesschau ZDF 16:00-16:10 heute - in Europa WDR Köln 16:00-16:15 WDR aktuell Bayerisches... 16:00-16:05 Rundschau hr-fernsehen 16:00-16:30 Schlemmerreise Spanien MDR FERNS... 16:00-16:15 Hier ab vier NDR FS HH 16:00-16:30 Tipps und Trends - Der Verbraucher... SWR Fernse... 16:00-16:05 Baden-Württemberg aktuell
➠ A wizard will guide you through the necessary presettings
the first time you start the EPG. If you have analogue reception, you enter the data capture for analogue stations after that (see next page). ➠ For TV sets with MHEG-5 software, EPG is only possi
ble for DVB-T stations.

Example If you are looking for the next news broadcast, select
today's date, until 17.00 for example for the time, all under Stations and News under Topics. Then all the news broadcasts to begin shortly are listed in the programme list below it. The type of station listing in the programme list depends
OK arte 15:57-16:59 Charmed - Zauberhafte Hexen Das Erste 16:00-16:10 Tagesschau ZDF 16:00-16:10 heute - in Europa WDR Köln 16:00-16:15 WDR aktuell Bayerisches... 16:00-16:05 Rundschau hr-fernsehen 16:00-16:30 Schlemmerreise Spanien MDR FERNS... 16:00-16:15 Hier ab vier NDR FS HH 16:00-16:30 Tipps und Trends - Der Verbraucher... SWR Fernse... 16:00-16:05 Baden-Württemberg aktuell
on the setting of sorting in the EPG menu (page 31). Time entry If the line Time is selected, then you can enter the time
after which the programmes will be displayed, via the numeric buttons of the remote control. The broadcasts are sorted according to the order of the station list within the selected time window. Stations If a favourites list has been selected, only the programmes
Detail View Record Page ↑↓ Select time Select date, ... , topics
The display of the programme guide is divided into two branches. The programme list (bottom) is influenced by certain specifications (top).
of stations from the favourites list are displayed in the programme list. If "...“ has been selected, a single sta tion can be selected. Then, only the programmes of this station are displayed. Tip Before pressing the blue button to leave the upper selec
Blue button: Switches between the upper default lines date, ..., topics and the lower programme list.
Switching and memorizing with the programme list
➠ In the programme list first all currently running
tion lines, select one of the preceding lines. If you then switch back to the programme list, you can change this menu line with 34, without having to leave the pro gramme list. If you have marked Time, then you can enter the time, after which the programmes will be displayed, with the numeric buttons of the remote control.
programmes are listed. ➠ You are in the lower programme list,
if not, press the blue button.
65 Select station, OK view / memorise.
Paging through the programme list
View The programme is in progress. The TV set switches to the
marked programme. Memorise The programme has not started yet and is memorised. A
P+/P– paging backwards / forwards.
In the entries for Date and Time, you will see changes in time as well as in date when paging. Scrolling in the programme list is also possible when the selection is at the top of the specifications.
appears in front of the programme. The TV set switches over automatically to the beginning of the programme or, if set in the EPG menu (page 31) on from standby mode.

Calling additional information about the programmes
You can remove certain stations from the programme guide. These stations must be deactivated in the Station selection. First, all stations for which programme infor mation can be provided are marked with a . Stations without a are not included in the programme guide. With the coloured buttons, you can select or deselect individual stations, select all stations at once or select only the stations in the favourites list. Marking the stations according to reception ranges: analogue stations via antenna/cable for the data
➠ Brief information about some of the programmes is
displayed below the programme list of the broadcasts.
You can call detailed information with the TEXT button if this function is offered by the TEXT icon in the lower left.
Programming a recording for a recorder
➠ The selection is in the lower programme list,
if not, press the blue button.
supplied by the current provider. digital terrestrial stations DVB-T, digital cable stations DVB-C, digital satellite stations DVB-S (1.
65 Mark the desired programme.
Red button: Starts recording wizard.
Change or confirm timer data if necessary (see page 44, "The direct way to record“).
If you want to use EPG for analogue and digital stations, select on (for DVB + analogue). If you want to use EPG and only have DVB reception, select on (only for DVB). If you are not using EPG and therefore do not want to receive any EPG data, select off. After making changes in the EPG menu, or each time the power switch has been switched off, the EPG data must first be captured. To do this switch on the device and select (for analogue stations) the station that you have defined as provider, and let the TV set run for about 1 hour with the selected station. Or switch the TV set to standby mode. After 2 minutes the display on the TV lights orange and the EPG data capture begins. When the data capture process has concluded the display will return to red. The data capture process is usually per formed between 2:00 am and 5:00 am, when the TV set is in standby mode.
Then a red dot will be displayed in front of this programme as identification.
Red button: Deletes the already programmed recording of the red marked programme from the timer. If the timer data have been transferred to an external recorder, then the timer must also be deleted there.
Start the EPG menu
➠ EPG mode is started,
if not, press the EPG button.
Call the EPG menu.
OK rovider Sortin Station selection EPG menu
Data capture Switch on TV when marked
Switch on TV when marked
If the TV set is switched on then if there are memorised programmes the TV set will switch over to these stations. If the TV set is in standby mode when a memorised pro gramme begins, then you can specify here whether the set should be turned on in this case. If you have set "yes" in the menu, the TV set will be switched on. If you are not in at the time, a safety prompt makes sure that the TV switches off automatically after 5 minutes without your acknowledgement.
Settings in the EPG menu: Select Provider (only for analogue stations), Station selec tion, Data capture, Switch on TV when marked, Sorting.
Explanations of setting possibilities in the EPG menu:
In analogue TV reception there may possibly be different providers who transmit the EPG data for certain station packages. To get another range of stations, you can change the provider with the Provider selection. If the provider you are looking for is not in the list, then use the yellow button to perform a Provider search. The stations offered by the provider will be displayed in a list.
The programmes can be sorted either according to their start time (sorting according to start time) or according to stations as in the station list (sorting according to station / favourites list).

Teletext
Additional page selection possibilities
Your TV set supports the two operating systems TOP Text and FLOF. Up to 2,000 pages are stored so that you have quick access.
1st possibility: Call overview page 100.
Starting and ending Teletext
2nd possibility: Directly enter the page number.
Switching Teletext on / off.
100 100 ARDtext Do 07. 09. 06 14 : 14 : 42 ARD Text
3rd possibility:
➠ The page includes 3-digit page numbers.
Politik: Die neuen Gesetzesentwürfe 120 Wird auch der Nahverkehr teurer? 121 Australien: Keine Zugeständnisse 122 Tote bei Zugunglück in Schweden 532
65 mark desired page number.
Tennis: Auftaktmatch wurde abgebrochen 204 Formel 1: Neues Reglement für Motoren 213 Fussball: Heimsieg für den Meister 204
Tennis: Auftaktmatch wurde abgebrochen 204 Formel 1: Neues Reglement für Motoren 213 Fussball: Heimsieg für den Meister 204
13:00 ARD-Mittagsmagazin 312 14:00 Tagesschau
13:00 ARD-Mittagsmagazin 312 14:00 Tagesschau
Tagesschau 110/112 Kultur 500 Wetter 170 Gesellschaft 530 Sport 200/600 Lotto/Toto 666 TV Guide 300/400 Wirtschaft 700
Tagesschau 110/112 Kultur 500 Wetter 170 Gesellschaft 530 Sport 200/600 Lotto/Toto 666 TV Guide 300/400 Wirtschaft 700
– + Inhalt tagesschau
– + Inhalt tagesschau
OK to call the page.
Page selection with the coloured buttons
Red button: back to the previously viewed page. Green button: on to next page. Yellow button: to next topic. Blue button: to next range of topics.
4th possibility:
➠ The page consists of several sub-pages indicated by the
selection option on the last line.
p TV Guide 300/400 Wirtschaft 700 – + Inhalt tagesschau 1 2 3 4 5
The coloured bars (for TOP) or the coloured text (for FLOF) in the second to last line indicate which coloured buttons you can use to page through topic areas and topics.
34 Page through sub-pages.
➠ The table can only be called for stations with the TOP
0 AV: Stop self changing pages.
operating system.
OK Call TOP table.
PIP button: Show / hide TV picture.
Wird auch der Nahverkehr teurer? 121 Australien: Keine Zugeständnisse 122 Tote bei Zugunglück in Schweden 532
TOP table ARD Text tagesschau Wetter Sport 1 Fußball TV Guide ARD heute ARD morgen Kultur weitere ...
Wetter Vorhersage Staedte Ballungsr. Reise

Tennis: Auftaktmatch wurde abgebrochen 204 Formel 1: Neues Reglement für Motoren 213 Fussball: Heimsieg für den Meister 204
13:00 ARD-Mittagsmagazin 312 14:00 Tagesschau
Politik: Die neuen Gesetzesentwürfe 120 Wird auch der Nahverkehr teurer? 121 Australien: Keine Zugeständnisse 122 Tote bei Zugunglück in Schweden 532
Tagesschau 110/112 Kultur 500 Wetter 170 Gesellschaft 530 Sport 200/600 Lotto/Toto 666 TV Guide 300/400 Wirtschaft 700
– + Inhalt tagesschau
Tennis: Auftaktmatch wurde abgebrochen . . . 204 Formel 1: Neues Reglement für Motoren 213 Fussball: Heimsieg für den Meister 204
65 mark topic area, 34 select topic column, 65 select topic,
13:00 ARD-Mittagsmagazin 312 14:00 Tagesschau
Tagesschau . . . 110/112 Kultur 500 Wetter 170 Gesellschaft 530 Sport 200/600 Lotto/Toto 666 TV Guide 300/400 Wirtschaft 700
– + Inhalt tagesschau
OK to call the page.

Programming timer recordings via Teletext
Explanations of the Teletext menu functions:
➠ Teletext is started,
A wizard for recording via teletext helps to programme an external recorder or the integrated Digital Recorder, see also left column.
if not, press the TEXT button.
Call the programme pages of the current station.
Other Teletext menu functions:
Green button: Go to the appropriate page.
Input of the first teletext programme preview page if this deviates from the factory setting (page 301).
65 Select the desired programme, OK to programme the recording.
Input of the teletext subtitle pages for every station if this deviates from the factory setting (page 150).
Change the appropriate recording data in the following menu Timer data (see also page 44, "The direct way to record“).
Define up to six teletext pages which can be opened later from a list in the menu Teletext functions → Personal text pages (in TV mode press green button, see page 22).
OK to confirm.
Teletext character set can be switched to other languages (Russian, Greek, Polish and Turkish).
Teletext menu In the Teletext menu you can activate messages, reveal pages and configure the teletext with the Settings menu function.
Improved graphic representation of the Teletext. (Not offered by all stations.)
Starting the Teletext menu
➠ Teletext is started, if not, press the TEXT button.
In the UK or Ireland, the teletext for DVB-T stations is transmitted as per the MHEG-5 standard. It contains text, graphics, functions and links.
Call the Teletext menu.
100 100 ARDtext Do 07. 09. 06 14 : 14 : 42 ARD Text
➠ Only for TV sets with MHEG-5 software. ➠ At the moment only available in United Kingdom and Ireland. ➠ Digital teletext is not available when DVB-subtitles are being displayed.
Politik: Die neuen Gesetzesentwürfe 120 Wird auch der Nahverkehr teurer? 121 Australien: Keine Zugeständnisse 122 Tote bei Zugunglück in Schweden 532
The operation of these menus depends on the particular provider. Normally after a station is changed, the provider broadcasting the digital teletext makes an introductory offer for this service on the screen via menu selection. Follow these notes.
Tennis: Auftaktmatch wurde abgebrochen 204 Formel 1: Neues Reglement für Motoren 213 Fussball: Heimsieg für den Meister 204
13:00 ARD-Mittagsmagazin 312 14:00 Tagesschau
Tagesschau 110/112 Kultur 500 Wetter 170 Gesellschaft 530 Sport 200/600 Lotto/Toto 666 TV Guide 300/400 Wirtschaft 700
Reveal Newsflash Teletext menu
– + Inhalt tagesschau
If no message appears telling you how to switch to digital teletext after switching to another station, press the TEXT key. If a selection for DVB subtitles is available, this item must be hidden before.
Explanations of the Teletext menu functions:
The current page is hidden when you activate New mess.. A symbol at the top left indicates that the function is ac tive. If the contents of the message are updated and it is a small newsflash, this is displayed in the TV picture. If it is a full screen page, the symbol is displayed in blue and the page can be called with the OK button.
Depending on the provider’s respective offer, you can use the 5634buttons and the OK button, the coloured keys, the END/TEXT button and sometimes even the numeric buttons.
If you want to close the digital teletext, just select a dif ferent station using the P+/P– buttons or follow the menu prompts on the screen.
Shows concealed information, e.g. for quiz questions or VPS pages in the programme preview pages.

Conditional Access module (CA module)
Searching for encrypted stations
➠ The search wizard must only be started when the
In order to be able to receive digital stations, a Conditional Access module (CA module) and a Smart Card must be inserted in the CI slot of your TV set (see pages 5 and 6). The CA module and the Smart Card are not part of the TV set's scope of delivery. They are usually available from your dealer. Loewe provides no guarantee for the functioning of the CA module.
setting possibility no has been selected for the search for coded stations in first-time start-up or no CA module has been inserted.
Call TV menu.
34 Select Settings, 6 go to the menu line below. 34 Select Stations, 6 go to the menu line below. 34 Select Search wizard, 6 go to the menu line below. 34 Select Change search settings, OK Wizard guides you through the search settings.
Inserting the smart card into the CA module Push the Smart Card into the CA module as far as it goes so that the side with the gold coloured contact chip is facing the side of the CA module marked with the provider's logo. Note the direction of the arrow printed on the Smart Card.

Description of the search settings, see page 24.
Calling CA module information
➠ This menu is available with digital stations only.
Call TV menu.
Inserting the CA module in the CI slot
34 Select Settings, 6 go to the menu line below. 34 Select Miscellaneous, 6 go to the menu line below. 34 Select CA module: xxx
➠ Switch off the TV set's power switch.
Open cover on the rear of the set.


(xxx corresponds to the CA module provider), OK Call information.
The content of this menu depends on the provider of the CA module.
Removing the CA module
➠ Switch off the TV set's power switch.
Open cover on the rear of the set.
Insert the CA module carefully into the CI slot with the contact side first. If you are standing in front of the TV set (display) then the logo on the CA module must be pointing to the rear. Do not use force. Make sure the module is not twisted in the process. The eject button protrudes slightly when the CA module is inserted correctly.
Press in the ejection button on the appropriate module drawer, the module is released.
Remove the module from the set.
Close the cover again.
Ejector button · Cover

Software update
Select software type: Select TV base software or DVB software, OK start search.
TV base software and DVB software Your TV offers you the option of updating the TV base and DVB software. The current software versions are broadcast by satellite (only via Astra1 at present) or can be installed in your set by a USB stick. Ask your dealer about the possibility of updating the software with a USB stick. ➠ Location of TV set UK or IRL: With the DVB software update either
The following on-screen message appears if new versions are available.
MHEG-5 or DVBi3 is updated depending on the selection during the first installation. After this update it is not possible any longer to switch between MHEG-5 or DVBi3 software via first installation. ➠ MHEG-5 software update only available via USB stick and DVB-T.
➠ New software available via search. ➠ If both a new TV and a new DVB software are available
in the automatic search for new software versions via satellite, you can select the software type which is to be updated.
Automatic search for new software via satellite If your set has a upgraded satellite tuner, it determines overnight whether a new software version is available via satellite. However, the TV set must remain in standby mode (do not switch off with the mains switch). If a new software version has been found, the set informs you with an on-screen message the next time it is switched on (see right column – Load new software).
Software update wizard A new software is available.
Please specify whether and, if so, when you want to load the new software.
Manual search for new software via USB /satellite If it is not automatically displayed that a new software is available when switching on the set, you can also run a manual search. The system first checks whether a software update is available on an inserted USB stick. If not, an updater is searched for via satellite if up graded.
Software update Update options
Load new software now Load new software after switch off to standby Keep current software
Select update option:
Load new software now Load new software after switching off to standby (update after switching off) Keep current software (no update desired). OK more or exit wizard. OK start software update.
Call TV menu.
34 Select Settings, 6 go to the menu line below. 34 Select Miscellaneous, 6 go to the menu line below. 34 Select Software update. OK calls software update wizard.
A bar is displayed to inform you about the progress of the load process. During the loading process do not switch off your device via the power switch! This may last up to 20 minutes. You will be informed when it is finished.
The software versions currently loaded in the set are listed.
Software update wizard Current TV base software: V4.3.0 Current DVB software: V4.3.0
At the end of loading: Turn off the TV set off with the power switch and turn it on again. This is unnecessary when the software is loaded with the Load new software after switching off to standby mode update option.
You can now search for new software. Please select the software type and start the search with the button.
If a new software has not been updated via satellite, you will be reminded of this several times when switching on the set.
Software update Software type
TV base software DVB software
Loading new software · OK Proceed · OK Proceed

Radio mode You can only receive radio stations via DVB. If you do not have DVB radio reception then you can play audio from an external device via the TV set using the audio/AV inputs. ➠ For TV sets with MHEG-5 software, the buttons may be configured
Switching the screen on/off
Red button: Switch off the screen.
The LED display on the set changes from green to orange.
Switch on the screen with the remote control: Red button, OK button or RADIO button.
differently by the provider.
Switch on the screen on the TV set: Press R on the TV set operating ring.

Radio menu In the Radio menu, you can set the sound, search for and store radio stations (automatically or manually), change stations and set switch off/alarm functions. The settings are made as described in TV mode.
Or: R on the operating ring on the TV set.
➠ Radio mode switched on,
if not, press the RADIO button.
You see and information window about the currently set station.
Call the Radio menu.
Stations Sound Radio menu
Minimise Radio dialogue to an info line / maximise.
Sound effects ...
Switch off radio mode
TV button on the remote control.
P+/P– or the numeric buttons of the remote control.
Or: R on the operating ring on the TV set.
Or: + / – on the TV set operating ring.
Or: OK call the station list / favourites.
EPG – Electronic Programme Guide (radio) For the DVB radio stations you can also use an electronic programme guide, if the station that is currently active supplies data.
➠ The selection of the stations / favourites is the same
as the procedure in TV mode (see page 18, 19).
Starting and ending EPG
V+/V– Volume louder / quieter. Other sound settings are the same as for the volume setting in TV mode (see page 20).
➠ Radio mode switched on,
if not, press the RADIO button.
Switching EPG on / off
➠ The EPG functions in radio mode are the same as in
TV mode. Read from page 30 onwards for further information.
Call Sound adjustment. Other settings as for TV mode (see page 20).

Device connection wizard

Connection wizard Specify all new AV devices to be connected and all connection changes to the existing devices here.
Connecting additional devices to the TV set The device connection wizard serves for connecting new devices to the TV set or changing the wiring.
DVD player DVD recorder Video recorder Satellite receiver SetTopBox/dBox Decoder Camcorder/camera Other device(s) to AV1/2/S Device to COMP.IN Device to HDMI1/DVI Device to HDMI2/DVI
➠ New devices should not be connected until they have
been logged in in the connection wizard.
Call TV menu.
34 Select Connections, 6 go to the menu line below.
34 Select New devices/modifications. OK Call wizard.
Yellow button: Place a check mark after the devices to be connected.
END: It is possible to run the wizard only partially at any time. You have to confirm changes on a page with OK.
OK Proceed. The connection plan is displayed again. Connect the devices to the back of the TV set (in this example the DVD player (DVD) to AV1, the DVD recorder (DVD•) to AV2).

Connection wizard Connect the satellite dishes or cable/terrestrial antennas of your AV equipment (recorder, decoder, ...) to the TV set according to the enclosed operating manual. The connection wizard assists you when you connect your equipment to the TV set via the AV sockets AV1, AV2 and AVS or via the SD/HD-COMPONENT IN or HDMI1/2(DVI)* socket.
New devices/modifications Signal type at socket AV1 Automatic CVBS/YC CVBS YC
Select the signal type of your set. Leave the setting on automatic if you are not sure.
Connection example of a DVD recorder

Follow the instructions on the TV set. The following illustrations provide an overview of the possible options.
to a set with Digital Recorder

Connection wizard Now the TV set assumes that you have connected the following equipment:
The connection diagram shows the devices that are cur rently configured. DVD player on AV1 and DVD recorder on AV2 are factory pre-sets.
➠ Use EURO AV cable with the right angled plugs.

Explanations of important settings
Proceed as follows (see also the operating manual of the connected recorder):
The signal type of the connectable devices may be very different. If you are uncertain, leave the setting for Signal on Autom.-CVBS/YC (e.g. for DVD player/recorder) or Au tom.VHS/SVHS (e.g. video recorder), otherwise select the appropriate signal type. See the glossary on page 60 for further information.
➠ Insert a DVD/cassette and press play.
Call AV selection.
34 Select VIDEO, OK to switch over.
If the picture from a connected device is to be displayed immediately on the TV set during playback, select yes. A switching voltage is allowed so that you do not have to switch over manually to see the picture of the connected device. (See the operating manual for the connected reproduction device.) When playing from Digital Link Plus devices, the picture is always displayed immediately, regardless of the setting.
If no picture is visible on the TV screen when playing the recorder, search for the recorder station automatically or set it manually.
To make sure no "normal" TV stations are found in the station search, pull the antenna plug out of the recorder antenna input temporarily (the cable to the antenna system).
Select the AV socket to which the device of which you want to hear the digital sound is connected. Connect the digital output of the external device to the digital input of the TV set (see page 43). If a device with digital audio is not connected then select no.
Manual recorder station search:
➠ VIDEO is selected by the AV selection.
Call TV menu.
34 Select Settings, 6 go to the menu line below.
Connection variants of a DVD/video recorder There are two possibilities for viewing the picture of the connected recorder:
34 Select Stations, 6 go to the menu line below.
34 Select Manal adjustment, OK to call other settings.
For Channel enter "E30“.
Blue button: Start search.
When you have found the recorder station:
Connecting an antenna to the DVD/video recorder If you want to receive and record analogue stations, it is useful to con nect the recorder in with the antenna cable (as shown in the connection example on page 37 bottom right). If the antenna connection is also used for the playback because the devicers are not connected by EURO-AV cables, you have to search for the recorder station and save it in the TV set.
Red button: Overwrite station slot.
Exit TV menu.
Plug the previously removed antenna plug back in.
If disturbances should now occur because a TV station is being broadcast on the same channel as the station of the recorder, then you must change the transmission channel on the recorder and scan for the recorder again on the TV set.

Connecting devices to the HDMI (DVI) connections and playback
Connecting devices to the PC IN connection and playback
The HDMI connections (High Definition Multimedia In terface) permit digital video and audio transmission via a connection cable from a player, e.g. from the Loewe ViewVision DVD recorder. The digital picture and sound data are transmitted without data compres sion and therefore lose none of their quality. Your TV set automatically shows 24p movies (see glossary page 60) output by a player connected via HDMI, e.g. Loewe BluTech Vision, in the original 24p format. Film quality improvement (DMM) must be set to on here (see page 21). Using a DVI/HDMI adapter cable, the digital video signals of a DVI player can also be played via the compatible HDMI connection. The sound must be fed in additionally. HDMI and DVI both use the same copy protection method HDCP.
You can connect a PC or a SetTopBox (STB) to the PC IN socket and thus use the screen of the TV set as an output device. ➠ When connecting the TV set to a PC, set one of the following screen
resolutions on the PC first: 800 x 600 60 Hz (SVGA) 1024 x 768 60 Hz (XGA) 1280 x 1024 60 Hz (SXGA) 1360 x 768 60 Hz (WXGA)
➠ When connecting a SetTop box, set the following screen resolutions
according to the possibilities of the SetTop-Box: SDTV: 720 x 576i 720 x 480i 720 x 576p 720 x 480p HDTV: 1280 x 720p 1920 x 1080i
Connecting the device Connect the device by an HDMI cable (type A, 19 pole) to the HDMI1/DVI or HDMI2/DVI socket of the TV set. If a DVI/HDMI adapter cable is used, the appropriate sound can be fed in via the audio input socket AUDIO IN1 (analogue) or AUDIO DIGITAL IN (digital) on the TV set. See also page 43. It is not necessary to log in HDMI devices in the connection wizard.
Connect the device via a VGA cable to the PC IN socket of the TV set (audio connection, see page 40). A log-in in the connection wizard is unnecessary.
Playback from the device

Playback from the device
Call AV selection.
OK DVD HDMI1/DVI AV selection VGA HDMI2/DVI VIDEO COMP. IN VCR
34 Select PC IN socket, OK to switch over.
34 Select HDMI1/DVI or HDMI2/DVI socket, OK to switch over. Start playback on the connected HDMI device. The best possible format for the picture will be detected and set automatically.
Adapting the geometry (only possible with certain signals) This is where the picture can be properly positioned and the position of the pic ture (horizontal and vertical) can be moved so that it fills the entire screen.
Call TV menu.
Digital Link HD in appropriately equipped HDMI devices As long as HDMI is selected as a memory location, all remote control commands which the connected HDMI unit can handle are passed on to it. The HDMI unit can therefore be installed in a concealed position and still be operated. Volume, Sound on/off, Sound adaptation and Picture format affect the operation of the TV set. Switch back to TV mode to the station last viewed with the TV button. Switch Digital Link HD on/off temporarily: Press the TV button for a little longer (approx. 1 second).
34 Selecting and adjusting the Geometry.
Setting the colour standard (only possible with certain signals)
Call TV menu.
34 Select Picture, 6 go to the menu line below. 34 Select and set colour standard: for PCs: RGB, für STB: Ycc (rare: Ypp or RGB) If the wrong standard is set then the colours will not be correctly displayed.
TV remote switch on via Digital Link HD In the TV menu under Connections → Miscellaneous → Remote TV switch on via Digital Link HD you can define that the TV set switches on auto matically from standby when a connected HDMI device displays a menu or a disk is inserted.
Connecting the device

Connecting the audio signal from the PC or from the SetTopBox
The sound will be reproduced via the TV set's speakers. Alternatively, connect the digital audio output of the ext. device to the AUDIO DIGITAL IN socket of the TV set.
Analogue audio signal: Connect the analogue audio signal from the PC or the SetTopBox via stereo cable to the AUDIO IN2 jack on the TV set.
Call TV menu.
34 Select Connections, 6 go to the menu line below.
The sound is played via the speakers connected to the TV set or a speaker system.
34 Select New devices/modifications.
OK calls the wizard.
the integrated Dolby Digital Decoder or via an exter nally connected digital audio amplifier.
OK continue to menu AV equipment selection. Select device at COMP. IN.
Connect the digital audio signal from the PC or the SetTop- Box via a simple cinch cable to the AUDIO DIGITAL IN socket on the TV set.
Yellow button: Activate COMP. IN.
For an analogue audio connection the audio is auto matically reproduced via the TV set's speakers. A digital audio signal must be assigned by TV menu → Connections → Miscellaneous → Assign digital audio input to the COMP. IN socket, see page 43.
The digital audio input can be assigned to the PC IN socket via the TV menu → Connections → Miscellaneous → Assign digital audio intput, see page 43.
For an external digital audio amplifier: ➠ External audio amplifier is already set in the sound compo
Playback from the device
nents wizard (see page 42).
Call AV selection.
Feed the digital audio signal of the AUDIO DIGITAL OUT socket on the TV set to the external amplifier.
OK DVD COMP. IN AV selection MI2/DVI VIDEO PC IN VCR AVS HDMI1
34 Select COMP. IN socket, OK to switch over.
Adapting the geometry (only possible with certain signals) This is where the picture can be properly positioned and the position of the picture (horizontal and vertical) can be moved so that it fills the entire screen.
DVD players/recorders with component video connec tions can also be connected to the Cb/Pb Cr/Pr Y sockets (SD/HD-COMPONENT) of the TV set instead of to the EURO AV sockets. The connecting cable with three cinch plugs transmits the picture informa tion in better quality than is transmitted by a EURO AV cable. You need an additional cable for audio transmission.
Call TV menu.
34 Select and adapt the Geometry.
Connect the component video outputs of the external device via a triple cinch cable to the Cb/Pb Cr/Pr Y sockets on the TV set.
Connect the analogue audio outputs of the external device to the AUDIO IN1 L/R sockets on the TV set.
Connecting the device

Sound components wizard
Play sound via TV speakers and active subwoofer
The sound components wizard helps you to configure the components used to play the TV sound. The TV speakers alone or with active subwoofer, active speakers, analogue or digital HiFi/AV amplifier or the Loewe Sound Projector can be configured depending on what you want to use. The sound components wizard is preset to playback via TV speakers at the factory. If a Loewe Preceiver Auro with link cable has been connected to the TV set, you can only select between TV speakers and Auro in the sound components wizard.
Connect your active subwoofer to one of the audio outputs AUDIO OUT L/R with cinch cables. Set the TV set to playback via TV speakers and an active subwoofer.
Call TV menu.
34 Select Connections, 6 go to the menu line below.
34 Select Sound components.
Upgradable Audio AC3 / dts / Decoder Your TV set may be equipped with an integrated Dolby Digital Decoder depending on the variant. This system has been introduced to the DVD video range and digital TV stations can also broadcast in digital multi- channel sound. For playback of 5 audio channels the surround sound is reinforced by the deepest frequencies from the subwoofer channel (SUB), (5.1 reproduction = 5 audio channels and 1 subwoofer). All 5 audio channels are reproduced with the full frequency range from 20- 20,000 hertz and generate the original theatre effect. The upgrade kit decodes Dolby Digital, dts and MPEG. Stereo signals can also be reproduced on multi-channel via Dolby Pro Logic and Dolby Pro Logic II. This is regardless of whether the signal is transmitted by an external device or received by the TV set. Equipment / upgrade of the different set variants and accessories see page 58 and 59.
OK calls the sound components wizard.
Select TV speakers + active subwoofer.
Sound components Sound playback via ...
OK TV speakers TV speakers + active subwoofer Active speakers HiFi/AV amplifier Sound projector Sound projector or TV speakers (swichable)
OK continue to the settings for the subwoofer.
Explanations of the setting options:
Adapt the volume of the subwoofer to the volume of the TV speakers.
Set the transfer frequency of the subwoofer so that it corresponds to the lower limit frequency of the TV speak ers. 90 Hz in this device.
Connect your active speakers to the audio outputs AUDIO OUT L/R of the TV set with cinch cables. Switch the TV set to playback via active speakers.
Switch to a station with music or start playback with music on a DVD player with P+/P–. Test both values (0° and 180°) with 34and select the one where you get a clearer bass reproduction.
Call TV menu.
34 Select Connections, 6 go to the menu line below.
34 Select Sound components. OK calls the sound components wizard.
Select Active speakers.
Sound components Sound playback via ...
TV speakers TV speakers + active subwoofer Active speakers HiFi/AV amplifier Sound projector Sound projector or TV speakers (swichable)
OK Exit wizard.

Connecting audio amplifiers
Connecting digital audio amplifiers
Continuation of the left column above ...
The sound component wizard permits configuration of different audio amplifiers (stereo amplifiers, surround amplifiers, analogue or digital) with different digital audio formats (Dolby Digital, dts, MPEG, and stereo/PCM). See the operating manual for the audio amplifier for more information.
For digital audio transmission: Select yes.
Connect the digital audio output of the TV set AUDIO DIGITAL OUT with the digital audio input of the amplifier via a cinch cable:
Call TV menu.
34 Select Connections, 6 go to the menu line below.

34 Select Sound components.
OK calls the sound components wizard.
Mark the HiFi/AV amplifier.

TV speakers TV speakers + active subwoofer Active speakers HiFi/AV amplifier Sound projector Sound projector or TV speakers (swichable)
Set sound formats, amplifier type and other settings, see explanations of the setting possibilities (left hand column).
OK continue. 34Select whether the sound is to be transmitted digitally or analogue to the the amplifier.
Connecting analogue audio amplifiers
Continuation of the left column above ...
Continue, depending on the amplifier, see right column.
For digital audio transmission: Select no.
Connect the analogue audio output of the TV device AUDIO OUT L/R via a stereo cinch cable to the analogue audio input of the amplifier:
Explanations of the setting possibilities:
Select the setting when an amplifier is connected and the TV speakers are not used. Playback can be switched between TV speakers and amplifiers in the sound menu after logging in a hi-fi amplifier under Sound via....

Specify sound formats which can be decoded with the digital amplifier (see operating manual of the used ampli fier).
Select either stereo or surround amplifier.
TV loudsp. as centre speaker
For every connected surround amplifier, select whether the TV speakers are to be used as centre speakers. If so, make a connection between the centre output of the amplifier and the centre input of the TV set AUDIO IN1 C with a cinch cable. Attention: Do not use the centre speaker connection of the amplifier, use the centre pre-amp output instead!
Select amplifier type and other settings, see explanations of the setting possibilities (left hand column).

Assignment of the digital audio input In order to be able to hear the digital sound of an external device con nected to an AV input, an AV input can be assigned to the digital audio input socket AUDIO DIGITAL IN. When switching to this AV input, the digital audio signal applied to the AUDIO DIGITAL IN input is passed on to the upgradable integrated Dolby Digital Decoder and the digital audio output socket AUDIO DIGITAL OUT. You will then hear the digital sound of the assigned AV input instead of the analogue sound if available.
The DVD player is already logged in at AV1 in the connec tion wizard at the factory.
If new devices are connected and registered in the connec tion wizard, the digital audio input AUDIO DIGITAL IN is assigned in the connection wizard (see page 38).
Connecting devices to the digital audio input For the digital audio playback from an external device, e.g. the DVD player, you have to feed the digital audio signal to the TV set. The external digital audio signal can be played back via the upgradable Dolby Digital Decoder in the TV set, via an externally connected digital audio amplifier or Loewe Auro.
External devices with DVI connection If an external device with DVI interface is connected to the HDMI1/DVI or HDMI2/DVI socket of the TV set by an HDMI/DVI adapter, you can con nect the digital sound of the external device to the digital audio input socket AUDIO DIGITAL IN. The assignment of the digital audio input to the corresponding HDMI socket of the TV set takes place as described in the column on the left. If you want to use the analogue sound of the external device, connect this to the AUDIO IN1 socket.
➠ An external audio amplifier must already be set in the
sound components wizard (see page 42).
Call TV menu.
External devices with HDMI connection If external devices with HDMI interface are connected to the HDMI1/DVI or HDMI2/DVI socket of the TV set, no assignment of the audio input is necessary because in HDMI the digital transmission of picture and sound takes place via one connection.
34 Select Connections, 6 go to the menu line below.
34 Select Miscellaneous, 6 go to the menu line below.
34 Select Assign digital audio input, 6 go to the menu line below.
34 Select AV input.
You can connect either the Loewe Individual Sound Projector or a home network system of different manufacturers (e.g. AMX, Crestron) to your TV set via the RS-232C interface. For the configuration of the RS-232C interface and further information about the different home networking systems, please contact your dealer.
TV menu Connections Miscellaneous
to AV2 to AV1 Assign digital audio input
to AVS to HDMI1/DVI to HDM no
To connect a DVD player to the digital audio input of the TV set for example, connect the digital output socket of the DVD player (DIGITAL OUT) via a cinch cable to the AUDIO DIGITAL IN socket on the TV set.

TV set

The direct way to record You can programme timer recordings for Digital Recorder or connected recorders available according to the equipment on the TV set. The record ing wizard is integrated at several places for programming a recording. You will find further information about recording with Digital Recorder in a separate user guide.
Timer data are displayed after selecting the broadcast you want to record. You can change these before confirming.

Recorder DVD-REC Station 01 Das Erste Date 14.09.2006 Recording time 17.15 until 17.45 VPS no Recording type once only
Programming a timer recording with the EPG
➠ You are in EPG mode;
if not, press the EPG button.

OK Confirm Timer data,
or change if necessary:
OK arte 15:57-16:59 Charmed - Zauberhafte Hexen Das Erste 16:00-16:10 Tagesschau ZDF 16:00-16:10 heute - in Europa WDR Köln 16:00-16:15 WDR aktuell Bayerisches... 16:00-16:05 Rundschau hr-fernsehen 16:00-16:30 Schlemmerreise Spanien MDR FERNS... 16:00-16:15 Hier ab vier NDR FS HH 16:00-16:30 Tipps und Trends - Der Verbraucher... SWR Fernse... 16:00-16:05 Baden-Württemberg aktuell
34 Select Recorder.
Select Date. Enter the recording date with the numeric buttons.
Select Recording time. Enter the recording time with the numeric buttons.
Detail View Record Page ↑↓ Select time Select date, ... , topics
Select VPS. 34 Set yes/no.
65 Mark the desired broadcast.
Select Recording type. 34 Set once only, Mon-Fri, daily, weekly.
Red button: Call Timer data. Change or confirm Timer data as necessary.
OK confirm the Timer data.
Programming a timer recording via teletext
➠ You are in teletext mode;
Setting possibilities in the Timer data menu:
if not, press the TEXT button.
Selection of the connected/integrated recorder.
301 302 ARDtext Do 14. 09. 06 09: 36 : 42
Do 14. 09. 06 Das Erste
Day of recording.
14.00 Tagesschau 14.10 In aller Freundschaft UT 316 Zweite Begegnung (D, 2005) 15.00 Tagesschau 15.10 Sturm der Liebe (221) 317 16.00 Tagesschau UT 16.10 Eisbär, Affe & Co 318 17.00 Tagesschau um fünf UT 17.15 Brisant 319 17.47 Tagesschau 17.55 Verbotene Liebe 320 18.20 Marienhof 321 18.50 Das Geheimnis meines 322 Vaters (19) 19.20 Das Quiz mit Jörg Pilawa 384 bis 19.50 Uhr
Time of recording.
Use VPS data, yes/no. (Some stations do not broadcast a VPS signal).
once, Mon–Fri, daily or weekly. In timer recordings via EPG, Serial can also be selected.
300 303
– + Jetzt im TV ARD morgen
➠ If you use an external recorder without Digital Link Plus, you have
to select the recording source (e.g. AUX) in the recorder. This is also the case when DVB broadcasts are to be recorded. The TV's receiver is used.
Call the programme pages of the current station. Change preset page numbers, see page 33.
Green button: Go to the appropriate page. 65 Select desired broadcast, OK calls Timer data. Change or confirm Timer data as necessary.
➠ When you use an external recorder with Digital Link Plus or a compa
rable system (e.g. P50), this is controlled automatically.

Programming the timer with the timer overview A timer recording can also be programmed manually.
➠ It is not possible to record HDTV broadcasts with external devices. Use
Call Timer list. You see a list of all previously programmed timers:
the internal Digital Recorder for this if it is installed.
Recorder with Digital Link Plus If you use an externally connected recorder with Digital Link Plus or a similar system, the TV set and connected recorder exchange data (e.g. compare station lists TV set/recorder or timer data of analogue stations). Please consult the operating manual of your recorder to find out of your recorder is Digital Link Plus compatible. In addition use only Euro AV cables for the connection between TV set and recorder.
Timer list Mon 31.07./11:28 Mon 14.09. 17:15-17:45 Das Erste Brisant Wed 16.09. 14:00-15:50 ZDF Biathlon-Weltcup Thu 22.09. 20:15-22:25 3sat wissen spezial
Analogue stations The timer data are transmitted automatgically from the TV set to the recorder after programming is complete. (For DVD recorders in addition the recording quality SQ or EQ is also transmitted.) The recording is then controlled by the recorder and the recorder tuner is used for reception of the programme. The recording data are not saved in the timer overview of the TV set. Consequently if you want to change or delete the timer data then you must do so on the recorder.
Change Delete New recording
Green button: Change timer recording.
Yellow button: Delete timer recording.
Red button: New timer recording.
Programming the timer manually
➠ The timer list is open.
Digital stations If you want to record digital stations with an externally connected recorder, then the DVB tuner is used and the TV device takes over control of the recorder. Then the station on the TV set is locked during the timer recording. It is not possible to switch over to another DVB station.
Red button: Call the Recording wizard.
Via teletext Via EPG Recording wizard
34 Select Manual, OK call Station selection.
34 Select station. OK Calls the Timer data.
Recorder without Digital Link Plus If the programmed timer cannot be transmitted to the external recorder (no Digital Link Plus) but supports Digital Link (Loewe-own system), the TV receiver is always used. Digital Link must be switched on on the recorder. Read the operating instructions of your Loewe recorder. In addition use only fully wired Euro AV cables for the connection between TV set and recorder.
For time data input, see page 44.
After confirming the timer data, the new recording is transferred to the timer overview.
Explanation of the setting possibilities of the recording wizard:
Via EPG Timer programming via EPG (see Programming a timer
Analogue and digital stations You can control the recording from the TV set. The recorder must be set manually to the AV input, to which the TV device is connect ed. The station on the TV set is locked during the timer recording. It is not possible to switch over to another station.
recording with the EPG, page 44).
Via Teletext Timer programming via Teletext (see Programming a timer
recording via teletext, page 44).
Manual Programming timer manually (see above).
Copy protection Copy-protected programmes will not be output on the EURO AV sockets for legal reasons.
Manual

PhotoViewer You can look at photos in standard JPEG format which are saved on a USB stick or a memory card in a card reader. You can also collect photos in a slide show.
➠ The photo overview is displayed.

➠ Certain USB memory media may not be supported by this set under
some circumstances.
Plug a card reader (via a USB cable) or a USB stick into the USB port on the TV set (see page 5 and 6). Use a USB extension cable (available from your dealer) for the USB stick if the USB socket is difficult to access (e.g. wall mounting) or the USB stick is too big to be plugged in.
5634Mark a photo, page with P+/P– if necessary. OK Display as full picture.
➠ No photos can be displayed which are available in progressive JPEG

format. A memory card or the USB stick should contain data in standard JPEG format with the file extension ".jpg“.
Call the Assist+ menu.
56 Mark PhotoViewer, OK continue.
If only one memory medium is available, the PhotoViewer is started. You see the first page of the photo overview (see right column).
or P+ next photo.
If several media are available, select with 34 memory medium and then with, OK start PhotoViewer.
or P– previous photo.
END: Show/hide photo information.
Yellow button: Zoom photo. Enlargement factors x2, x4, and x8 are possible. Press the key several times. At the 4th press return to original size.
Ending the PhotoViewer Remove used memory medium.
Or: Press END button (when photo list is displayed).
Select photo section in zoom mode with 5634. Exit the zoom mode to the photo overview with OK or the STOP button.
Or: Press TV or RADIO button.
34 Rotate picture by 90 degrees to the left/right. ➠ Photos shown in a slide show can only be turned to
Or: Press the Assist button and call another function in the Assist+ menu.
view in the pause mode.
OK or STOP button: Back to the photo overview.
Viewing photos · Connecting · Starting the PhotoViewer

Calling the PhotoViewer menu In the PhotoViewer menu you can make picture settings and select the memory medium.
➠ Folders will only be displayed if they were created on the
memory card / USB stick.
5634Mark a folder in the photo overview. OK Open folder. The photos in this folder are displayed.
➠ The photo overview is displayed.
Call PhotoViewer menu.


Picture display Picture crossovers Picture change Go to ... PhotoViewer menu
Explanations of the setting possibilities:
Marking photos for slide show Mark the photos that you want to display in a slide show.
Go to...
Within the folder select a photo directly or go to the beginning or end of the folder.
With Optimum size the photo is reduced or enlarged in size so that the screen is optimally filled. With Original resolution each pixel of the photo represents one pixel on the screen. If the photo resolution is higher than that of the screen, then portions of the photo will be cropped.
Set the display time per photo in a slide show to between 3 and 60 seconds. The loading time of the photo depends on the photo size, the number of saved files and the transmission speed of the memory medium. Therefore a photo change may take longer than specified.
➠ No pictures are marked: All photos of the folder that
was just opened will be displayed. ➠ Photos marked: Only marked photos will be displayed.
There is a chocie of four different photo transitions for changing slides. You can also have the photo transitions run in sequence.
Play button: Start / continue slide show.
OK calls the photo overview.
Display additional information about the picture: Recording time and date, resolution and picture size.
Pause button: Pause / continue the slide show.
Yellow button: Zoom picture (only in pause mode).
Set picture adjustment, contrast, colour intensity, colour temperature, brightness, sharpness, DNC.
34Rotate picture to left/right in 90º steps (only in
Pause mode).
Select whether or not the previously heard sound is to be heard during the PhotoViewer operation.
or P+ next photo.
Select memory medium from which the photos are to be reproduced. This menu item is only displayed if at least two memory media are available.
or P– previous photo.
STOP button: End slide show.

MusicBox You can play music files in MP3 format which are saved on a USB stick or a memory card in a card reader. You can also collect the music titles in play lists.
Select/play music After starting the MusicBox the content of the memory medium, the MusicBox list, is displayed.

Connection ➠ Certain USB memory media may not be supported by this device. ➠ Your memory medium should not exceed a total capacity of 8 GB. Larger
memory media may not be supported. The read-in time of the memory medium depends on the stored data volume. ➠ The file names must have the extension “.mp3”. Alternative specifications
such as MP3 Surround or similar are not supported.
Plug a card reader (with a USB cable) or a USB stick into the USB port on the TV set (see page 5 and 6).
56 Mark folder, scroll with P+/P- if necessary, OK open selected folder.
You see the music files (titles) and/or sub-folders in the opened folder.
Call Assist+ menu.
One folder level back:
56 Mark MusicBox, OK continue.

If there is only one memory medium the MusicBox is started with the MusicBox list (see right column). If several media are available select with
.. Title_01.mp3 Title_02.mp3 Title_03.mp3 Title_04.mp3 Title_05.mp3 Title_06.mp3 Title_07.mp3 Title_08.mp3 Title_09.mp3 Title_10.mp3 Title_11.mp3
34 memory medium and then with, OK start MusicBox.
Ending the MusicBox Remove used memory medium.
56 Mark title, scroll with P+/P- if necessary, OK play marked title. Then the MusicBox status window opens with
Or: Press TV or RADIO button.

Or: Press the Assist button and call another function in the Assist+ menu.
➠ If the file contains additional information (ID3 tags), the
➠ If the MusicBox is ended during playback the MusicBox
remembers the appropriate place in the title. If the TV set is not switched off or the memory medium removed in the meantime, the playback continues at this point the next time the MusicBox is called. The MusicBox then starts immediately on the MusicBox status window (see right column).
Starting the MusicBox


Functions of the control buttons
➠ Title is played.
Green button: show Artists. All music titles are sorted alphabetically according to artists (ID3 tags).
STOP button: once: resume stop, twice: stop.
Savatage Sido Sinatra Frank Starship Steel Pulse System Of A Down Texas Lightning Thin Lizzy
Play button: After resume stop: continue playing at place where playback was interrupted. After stop: start playing the first title according to the set sorting. For playback: start the current title from the beginning. For pause: Continue playback.
All Titles All Albums Files Select letter Albums by ... Titles by ... Page P+ P -
56 Mark artist, scroll with P+/P- if necessary or enter
the initial letter with numeric buttons like a mobile phone keypad (see page 15).
Pause button: pause / continue playback.
OK Albums by ... call artist. The albums of the selected artist are displayed sorted alphabetically. 56 Mark album and select with OK. 56 Select title in album and play with OK in MusicBox status window.
short: next title, long: wind.

Red button: Switch off TV screen. Press red button, INFO or OK to switch back on.
TEXT: Titles by ... call artist. The titles of the selected artist are displayed sorted alpha betically. 56 Select title and play with OK in MusicBox status window.
Reduce info window to one line / maximise again.
Sorting according to titles
Yellow button: Show All Titles. All available titles are sorted alphabetically by ID3 tags and displayed with the appropriate artist. 56 Select title and play with OK in MusicBox status window.
MusicBox – browse/sort You can browse or sort the contents of your memory medium with the coloured buttons according to certain criteria (file names, titles, artists, albums).
Sorting according to albums
➠ The MusicBox list is displayed.
Blue button: Show All Albums. All available albums are sorted alphabetically by ID3 tags and displayed with the appropriate artist. 56 Mark album and select with OK. 56Select title in album and play with OK in MusicBox status window.

Blue button: call Browse/sort. The MusicBox overview is sorted according to Files at the beginning. The sorting is based on the file names of the music files regardless of their ID3 tags.
56 Select file/folder and play/open with OK.
Track_04.mp3 Track_05.mp3 Track_06.mp3 Track_07.mp3 Track_08.mp3 Track_09.mp3 Track_10.mp3
Sorting according to files
Red button: Show file overview.
Exit search/sorting. The new sorting is retained in the MusicBox list.
Exit sorting

MusicBox – Play lists You can save and call your music titles in play lists. Change and create play lists as you like. The play lists are created on the memory medium in the common M3U format for simple exchange with the PC.
Create new play list / add title
➠ The play list overview is displayed. ➠ List selection (left column) must be selected.
If not, change the column with 3.
Blue button: Call Create play list. A new empty play list is created. The file selection is visible on the left.

Call / play play list
➠ The MusicBox list is displayed.

Abba ACDC Elton John Eros Ramazzotti Rolling Stones Title_1.mp3 Title_2.mp3 Title_3.mp3 Title_4.mp3 Title_5.mp3 Title_6.mp3 Title_7.mp3
Alternative 1 Bolero Maurice Ravel Instrumental 2 All Night Long Lionel Richie Jazz & Funk 3 Burn Deep Purple Metal 4 All The Small Things Blink 182 Oldies 5 Summer In The City Joe Cocker R’n’B / HipHop 6 In The Mood Glenn Miller Reggae / Ska 7 Rocket Man Elton John Rock 8 Fight For Your Right Beastie Boys Playlist 1 9 Paint It Black Rolling Stones Playlist 10 10 Me And Bobby Mc... Janis Joplin Playlist 11 11 Can’t Buy Me Love The Beatles Playlist 12 12 No Woman No Cry Bob Marley Playlist 13 13 Bad Moon Rising CCR
Adopt to play list Open folder Page P+ P -
56 Mark title/folder, scroll with P+/P- if necessary, OK Add marked title or complete folder contents to
Change play list Delete play list Create play list
the play list. To go to a sub-folder: Yellow button: Open folder
In the play list overview you see the created play lists on the left hand side of the dialog. On the right next to it you see the music files in the marked play list.
56 Select play list, scroll with P+/P- if necessary. OK The play list is played in the MusicBox status
Change play lists You can adapt the play lists as required. It is possible to move the titles in the play lists or remove them from the list. The play list can be renamed or deleted completely.
window starting with the first title. The name of the play list is displayed after the title.
OK The play list is displayed again. 4 Change from list selection to title selection.
➠ The play list overview is displayed.


Alternative 1 Bolero Maurice Ravel Instrumental 2 All Night Long Lionel Richie Jazz & Funk 3 Burn Deep Purple Metal 4 All The Small Things Blink 182 Oldies 5 Summer In The City Joe Cocker R’n’B / HipHop 6 In The Mood Glenn Miller Reggae / Ska 7 Rocket Man Elton John Rock 8 Fight For Your Right Beastie Boys Playlist 1 9 Paint It Black Rolling Stones Playlist 10 10 Me And Bobby Mc... Janis Joplin Playlist 11 11 Can’t Buy Me Love The Beatles Playlist 12 12 No Woman No Cry Bob Marley Playlist 13 13 Bad Moon Rising CCR
4 Go to the page of the play list (right column),
Abba ACDC Elton John Eros Ramazzotti Rolling Stones Title_1.mp3 Title_2.mp3 Title_3.mp3 Title_4.mp3 Title_5.mp3 Title_6.mp3 Title_7.mp3
1 Lay it Down 2 Fallin’ 3 Do that to Me One More... 4 Hero 5 Insatiable 6 There You’ll Be 7 Let’s Wait a While 8 What If 9 Stillness of Heart 10 Free-One 11 Stop Crying Your Heart 12 Separate Lives
Change play list Delete play list Create play list Page
56 Select title, scroll with P+/P- if necessary, OK The play list is played in the MusicBox status
window from the marked title.

MusicBox menü In the MusicBox menu you make sound settings, can select the memory medium and set the repeat mode.
➠ Play list (right column) must be selected. If not, change
column with4.
➠ MusicBox must be activated.
Blue button: Starts Rename play list.
Call MusicBox menu.
Numeric buttons: Enter new name (same procedure as for rename station, see page 26).
Repeat Select memory medium MusicBox menu
Sound USB1 ...
OK Save new name.
Explanations of the setting options:
Move titles in the play lists / change order
Select memory medium from which the audio files are to be used. This menu item is only displayed if at least two memory media are available.
➠ Play list (right column) must be selected.
56 Mark title to be moved.
The settings correspond to the sound settings in TV mode (page 20).
Yellow button: Starts Move title.
56 Select insertion position at which the marked title
Titles can be repeated in two ways: Title: Only the played title is repeated.
is to be inserted. OK Move title.
Folder or Play list: Only the titles from the currently selected folder or, if play list is activated, the current list are repeated.
Remove titles from play lists / clear play list
➠ Play list (right column) must be selected.
56 Mark title to be deleted. OK Remove marked title from play list. Or: Red button: Starts Clear play list.
Repeating is endless until the function is switched off in the MusicBox menu. The appropriate symbols for the repetition are displayed in the top right of the info window.

OK Confirm clearing play list.
Delete play list from memory medium
➠ The play list overview is displayed.
56 Mark play list to be deleted.
Yellow button: Starts Delete play list.
OK Confirm delete play list.
Exit play list overview
➠ The play list overview is displayed.
Red button: Call MusicBox list. Or: END: Call MusicBox status window.

Operating Loewe equipment

Using the remote control for the TV mode of the TV set
Press the TV button, the display above it will light for approx. 5 seconds.
Using the remote control for a recorder
Press the REC button, the display above it will light for approx. 5 seconds.
Using the remote control for a DVD player
Press the DVD button, the display above it will light for approx. 5 seconds.
Using the remote control for the radio mode of the TV set
Press the Radio button, the display above it will light for approx. 5 seconds.
As long as a button is pressed, the display of the selected operating mode lights up (TV – REC – DVD – RADIO). This allows you to check which operating mode the remote control is set to every time you press a button.
Setting the remote control to other Loewe devices The specified button combination must be kept pressed (for approx. 5 s) until one of the LEDs flashes twice.
Loewe Centros 1102 / 1172 +
Loewe Centros 2102 HD / ViewVision +
Loewe ViewVision DR+ / DVB-T +
Loewe ViewVision 8106 H +
Loewe Auro 2216 PS / 8116 DT +
Loewe Xemix 6222 PS +
The devices marked by are preset in the remote control supplied with the TV set.
Device Button combination · Loewe TV +

Functions for the Loewe DVD player (Auro 2216 PS, 8116 DT)
Functions for the Loewe DVD recorder (Centros 1202, 2102 HD, ViewVision DR+)
1 2 3 4 5 6 7 8 9 10 11
Sound off/on LED indicator for current operating mode Switch over to operate TV set Switch over to operate Recorder Sleep timer Set TV picture format; RADIO: Mono/Stereo DISC: Repeat; RADIO: display RDS name/frequency of station DISC: User interface of loaded DVD Show/hide menu; MENU: close window V–/V+ Volume down/up DISC: Title/Chapter overview; RADIO: station table MENU: confirm menu selection Green button: Title/Chapter selection Red button: DISC: camera position DISC: short: beginning of chapter/title previous chapter; long: search back; RADIO: short: fine tuning back long: search back no function Pause; single frame; slow motion Switch on/off - on stand by short: TV Radio Digital; long: Auro FM/AM-Radio Switch over to operate Auro Select sound format DISC: select chapter/title; RADIO: select stored station; MENU: enter digits MENU: enter numbers or letters DISC: Repeat A-B; RADIO: FM/AM-mode Select external audio source DISC: menu bar MENU: context help DISC: Status display; RADIO: station table MENU: hide menu P+/P– DISC: next/previous chapter; RADIO: station forward/back 56 DISC: chapter up/down; MENU: select up/down; 34 DISC: search back/forward; MENU: select left/right Yellow button: Zoom Blue button: Set marker Playback DISC: short: next chapter/title; long: search forward RADIO: short: fine tuning forward; long: search forward Stop
1 2 3 4 5 6
TV Sound off/on LED indicator for current operating mode Switch over to operate TV set Switch over to operate Recorder Timer recording menu; timer recording list menu STOP: Title List; PLAY: Edit thumbnail; CARD: Photo-, Music-, Film-Mode ViewVision DR+: Timeshift Mode STOP: Call AV selection (AV1-AV4,DV,TV) ViewVision DR+: PLAY: skip 15 Sec. User interface of loaded DVD MENU: original / playlist Show/hide menu V–/V+ TV Volume down/up Status display (TV, DVD) MENU: confirm the menu selection Green button: ShowView menu Red button: new chapter marker PLAY: press short: Start of current chapter/previous chapter; press long: search back; PAUSE: press short: slow motion back Record Pause /single frame Switch on/off - on stand by TV Radio Digital Switch over to operate DVD-Player TV Sound menu STOP: Select station directly MENU: enter numbers or letters MENU: enter numbers or letters ViewVision DR+: STOPP: Call AV selection Card Reader operation ViewVision DR+: „Home“ menu PIP (picture in picture) Info; PLAY: menu bar MENU: hide menu P+/P– PLAY: Next chapter; STOP: Select station up/down MENU: select/set Yellow button: Zoom Blue button: DISC: short: Set marker; long: Marker search Playback PLAY: Press short: next chapter; Press long: search forward PAUSE: Press short: slow motion forward Stop
15 16 17 18 19 20 21
15 16 17 18 19 20 21
22 23 24 25
24 25 26 27 28 29 30 31 32
29 30 31 32
9 10 11 · 12 13 14 · 12 13 14

Rotating the TV set (upgradable interface) Your TV set can be upgraded with the connection for a rotating foot control. If the set is assembled with a Loewe stand with motor drive, you can align it to suit your sitting position using the remote control.
Specifying the switch off position This is where you specify the position that the TV will take when it is switched off. In order for the TV set to return to the determined switch-off position when switching it off, this must be activated (see below).
➠ A motor unit is connected. ➠ In normal TV mode, without other displays.
Call TV menu.
34 Select Settings, 6 go to the menu line below.
34 Rotating the TV set.
Do not place any objects in the rotation range of the TV set that could obstruct the rotation or that could be knocked over by the rotation movement.
34 Select Miscellaneous, 6 go to the menu line below.
34 Select Rotate TV, 6 go to the menu line below.
Setting the range of rotation You can determine the range of rotation (maximum +/- 40°) of the TV set by setting the maximum right and left stop.
34 Select Set switch-off position, OK calls Set switch-off position.
Call TV menu.
TV menu Settings Miscellaneous Rotate TV
34 Select Settings, 6 go to the menu line below.
OK 0 Set switch-off position
34 Select Miscellaneous, 6 go to the menu line below.
34 Set the desired switch-off position. The TV set rotates in the process. OK Save the set position as the switch-off position.
34 Select Rotate TV, 6 go to the menu line below.
Close the menu.
34 Select Basic adjustment, OK calls the basic adjustment.
Activating the switch-off position
OK 21 Basic adjustment (right) Rotate TV
Call TV menu.
34 Select Settings, 6 go to the menu line below.
4 Basic adjustment (right)
Turn your TV set as far to the right as the installation position allows. This will be the maximum right rotation position in future. OK confirms basic adjustment to right.
34 Select Miscellaneous, 6 go to the menu line below.
34 Select Rotate TV, 6 go to the menu line below.
OK -30 Basic adjustment (left) Rotate TV
34 Select Activate switch-off position, 6 go to the menu line below.
End of basic adjustment
3 Basic adjustment (left)
34 Select yes.
Rotate your TV set as fasr to the left as the installation position allows. This will be the maximum left rotation position in future. OK ends the basic adjustment.
Close the menu.
If the TV set is switched off with the on/off key on the remote control or with the switch integrated in the display then it will turn to the defined siwtch-off position. When it is switched back on, it returns to the position last set.
Close the menu.
Adopt · Proceed

Problem Possible cause Remedy
All menus are displayed in the wrong language. The menu language was set incorrectly. Set the menu language: Press the INFO button in TV mode (Index). Mark the first key word and call it with OK. Then select the language and confirm it with OK.
In the TV menu, Connections cannot be called (displayed in grey).
A timer recording is in progress. Wait until the timer recording ends or delete the timer recording (page 45).
The control functions of the Loewe Recorder and the Timer are not working or are not working properly
a) The Digital Link function is not activated or
a) Activate Digital Link in the recorder (see
not possible in the recorder. b) EURO-AV cable is not connected. c) Recorder is not logged in.
operating instructions of the recorder). b) Connect EURO-AV cable (page 37). c) Register recorder (page 37).
General problems when connecting external devices via an AV input.
a) The device is not logged in to the connection
a) In the connection wizard (TV menu →
wizard or is connected differently than is shown in the connection diagram.
Connections → New devices/modifications) compare the connection diagram with the actual installation and connect as illustrated (page 37). b) Set the correct standard (page 17). c) Set the correct signal type (page 37). If for AV standard or AV signal "Automatic"
b) The AV standard is set incorrectly. c) The signal type is set incorrectly.
is set then this can cause errors to be detected with signals that do not comply with standards. In this case standard and signal must be set according to the information in the operating manual of the external device.
The connection of a decoder does not function or does not function properly.
a) The signal is not decoded because the correct
a) Follow the instructions in the connection
decoder stations have not been selected in the connection wizard.
wizard (TV menu → Connections → New devices/changes) and select the appropriate decoder transmitter (page 37). b) Follow the instructions in the connection
b) In decoder mode the sound is missing
wizard and select the right audio source (Decoder, TV oder Autom.) (page 37), see also decoder instructions.
because the wrong decoder sound has been assigned in the connection wizard.

Problem Possible cause Remedy
Digital Link Plus does not work. a) EURO-AV cable is not fully wired (pin 10 not
a) Replace the EURO-AV cable.
wired). b) Some recorders can only adopt stations
b) Restore the recorder to the as-delivered
during the initial installation of the TV set.
state (see recorder's operating manual).
With Teletext various character sets are displayed incorrectly.
The wrong character set has been set in the Teletext menu.
Set the right character set: Teletext menu → Settings → Character set: Select Standard or the appropriate character set.
No sound via the external digital audio amplifier.
a) The external digital audio amplifier does not
a) Set PCM stereo on the DVD player in the
support the selected sound format (Dolby Digital, dts, MPEG).
sound selection. For DVB stations on the TV set switch to stereo in the status display (END) – language/audio selection (Green button). b) Connect AUDIO DIGITAL OUT from the TV set
b) TV set and external digital audio amplifier are
to a Digital-In input of the external digital audio amplifier and select the appropriate input to this.
not connected with each other.
In the connection wizard (TV menu → Connections → New devices/modifications) compare the connection diagram with the actual installation and connect as illustrated (page 37).
The picture of a connected external recorder is visible but the timer cannot be called.
The device is not registered in the connection wizard or is connected differently to shown in the connection diagram.
In the connection wizard (TV menu → Connections → New devices/modifications) compare the connection diagram with the actual installation and connect as illustrated (page 37).
The picture of a connected external recorder is visible but the error message no recorder available is still output.
The device is not registered in the connection wizard or is connected differently to shown in the connection diagram.
Photo on the USB stick is not displayed correctly in the PhotoViewer or a "?“ appears.
The photo is not available in a displayable format.
Convert photo file into a standard JPG format on the PC.

General data
Type Connect 32 Connect 37 Connect 42 Article number 67406xxx 67403xxx 67407xxx Dimensions for device without stand (W x H x D) in cm Dimensions for device with stand (W x H x D) in cm
83,1 x 54,8 x 12,1 83,1 x 59,4 x 20,8 95,9 x 63,2 x 12,1 95,9 x 67,8 x 24,4 106,9 x 69,4 x 12,1 106,9 x 74,1 x 27,4 Weight for device without stand (approx.) in kg Weight for device with stand (approx.) in kg
17,6 19,6 20,7 23,0 31,2 33,7 Display HD-LCD technology FHD-LCD technology FHD-LCD technology Picture diagonal in cm/picture format 80 / 16:9 94 / 16:9 106 / 16:9 Resolution in pixels 1366 x 768 1920 x 1080 1920 x 1080 Dynamic contrast ratio 7,000:1 6,500:1 8,500:1 Static contrast ratio 1,300:1 1,000:1 1,300:1 Viewing angle horizontal and vertical 176° 178° 178° Power consumption (EN 62087) in operation (watt) in standby (watt)
80 / 85 (Media) / 95 (Media DR+) 1,2 95 / 100 (Media) / 120 (Media DR+) 1,2 115 / 120 (Media) / 130 (Media DR+) 1,2 Ambient temperature (Celsius) 5° – 35° Relative humidity (non-condensing) 20 – 80% Air pressure 800 – 1114 hPa (0 – 2000 m above sea level)
Electrical data Chassis designation: L 2710 Power supply: 220 V – 240 V/50–60 Hz Tuner: VHF/UHF/cable/hyperband Range: 45 MHz to 860 MHz Station storage locations incl. AV and radio: 4000 TV standards: B/G, I, L, D/K, M, N Colour standard: SECAM, PAL, NTSC, NTSC-V, PAL-V (60 Hz) Sound standard Mono/Stereo/2-Ton/Nicam B/G, I, L Audio nominal power (sine): 2 x 20 watt Lower limit frequency of the speakers 90 Hz Teletext: TOP/FLOF Level 2.5 Page memory 2000 Digtial teletext (only in UK / IRL with active MHEG-5 software) MHEG-5 Connections (max. equipment) Mains socket: Supply voltage EURO-AV 1 Video IN: Y/C (S-VHS/Hi 8) CVBS (VHS/8 mm) Video OUT: CVBS (VHS/8 mm) Y/C (S-VHS/Hi 8) Audio IN: L/R Audio OUT: L/R EURO-AV 2 Video IN: Y/C (S-VHS/Hi 8) CVBS (VHS/8 mm) RGB Video OUT: CVBS (VHS/8 mm) Y/C, (only with SVHS Link Plus) Audio IN: L/R Audio OUT: L/R
Jack 3.5 mm: Headphones 32-2000 ohm Mini-DIN (AVS) Video IN: Y/C (S-VHS/Hi 8) CVBS (VHS/8 mm) Cinch (yellow) Video IN: CVBS (VHS/8 mm) Cinch (white/red) Audio IN: L (white) / R (red) 2 x IEC socket 75 Ohm/5 V/80 mA: Antenna/cable/DVB-T/C (1 2 x F socket 75 Ohm 13/18 V/350 mA: ANT-SAT DVB-S/S2 (1 Cinch Audio IN max. 2Vrms: Centre 2 x Cinch AUDIO IN1: L (white) / R (red) Jack 3.5 mm AUDIO IN2: L/R 2 x Cinch AUDIO OUT (level configuration-dependent):...L (white) / R (red) Cinch COMPONENT IN: Cb/Pb signal Cinch COMPONENT IN: Cr/Pr signal Cinch COMPONENT IN: Y signal Cinch Audio Digital IN (SPDIF): Digital audio Cinch Audio Digital OUT (SPDIF): Digital audio SUB-D AUDIO LINK: Multi-sound (1 SUB-D PC IN: PC/STB video signal SUB-D RS-232C: Serial interface (1 Mini-DIN SERVICE: Service/L-Link Mini-DIN CONTROL: Rotating stand control (1 2 x USB USB 2.0: Standard JPEG/MP3 files (1 2 x HDMI Digital Video/Audio IN Type A 19pole Standard 1.3: Digital video and audio CI-Slot Common Interface: Slot for CA module Ethernet (8P8C) LAN: Network interface (2 SMA WLAN antenna: Connection additional antenna (2 (3
(1 Equipment variants and upgrade possibilities, see page 59. (2 only for sets wilth Network Mediaplayer. (3 not for Connect 32 Media.

Setup possibilities
Accessories
Loewe Equipmentboard: When using a Loewe Connect in connection with the Floor Stand Trapeze the Loewe equipment board offers the possibility of integrating a DVD player in the installation solution for example.
Loewe VESA-Adapter: The Loewe VESA adapter offers you the possibility of also using your TV set for other VESA-compatible fastening devices. Please only use the original LOEWE VESA adapter for your TV set and use the VESA-compatible fastening devices recommended by Loewe.
Wall Mount WM 54
Loewe Individual Sound: Your TV set can be perfectly supplemted by the Individual Sound speaker system in connection with the Audio AC3 / dts upgrade kit. Numerous speaker combination possibilities with standard speakers, staellite speak ers and a subwoofer can be implemented.
Floor Stand 4 (1 Floor Stand Trapeze
Floor Stand 5 MU (1 (2
Loewe Individual Sound Projector: With the Loewe Individual Sound Projector you can easily enjoy digital Surround Sound without expensive installation and connection of several speakers. The Sound Projector is easy to set and operate.
Table Stand ( delivery status) Wall Mount WM 54 Floor Stand 4 (1
Loewe DVD Recorder: The DVD recorders from Loewe feature forms and colours which match the Loewe TV sets, an adapted user operation and technology. Combined these devices form a system that offers many advantages.
Floor Stand 5 MU (1 (2
Floor Stand Trapeze C42
Table Stand ( delivery status) Wall Mount WM 54 Floor Stand 4 (1
Loewe Blu-ray Player: With the Loewe Blu-ray Player “BluTech Vision“ you are ideally equipped for the successor format to DVD. With the Loewe system integration you control BluTech Vision and your Loewe TV set simultaneously with the Assist+ remote control.
Floor Stand 5 MU (1 (2
Floor Stand Trapeze C37
Table Stand ( delivery status) Wall Mount WM 54 Floor Stand 4 (1
Floor Stand 5 MU (1 (2
Floor Stand Trapeze C32
(1 Only in conjunction with appropriate adapters that are sold separately. (2 Only in conjunction with Loewe Individual Sound Projector.
Subject to availability.

Equipment variants and upgrade kits
Upgrade kit Audio AC3 / dts (Art.No. 89781.080): A fully fledged Dolby Digital Decoder can be integrated in the TV set with the Audio AC3 / dts upgrade kit. A surround system such as Loewe Individual Sound can then be connected.
Upgrade kit Digital Single Satellite Tuner (Art.No. 89565.081): You can receive digital satellite and HDTV stations with the upgrade kit. The tuner is integrated in the TV set and is operated with the remote control/menu control. You will find the upgrade options for your set in the table. Upgrade kit Digital Single Satellite Tuner (Art.No. 89565.080): You can have two digital satellite tuners installed in sets with Digital Recorder. This enables reception of digital satellite and HDTV stations and extends the display of PIP and the recording possibilities of Digital Recorder for two digital satellite stations. You will find the upgrade options for your set in the table.
Adapter and cables: AUDIO LINK adapter cable 0,25 m Loewe Art.No. 89954.001 AUDIO LINK cable 1,5 m Loewe Art.No. 89952.001 AUDIO LINK cable 6 m Loewe Art.No. 89952.002 AUDIO LINK cable 10 m Loewe Art.No. 89952.003 Cubic connector cable 6 m Loewe Art.No. 90418.930
Upgrade kit Motor Unit/RS232C (Art.No. 89634.080): The Motor Unit / RS232C upgrade kit allows you to stand the TV set on a table or floor stand solution with a motor-controlled rotating foot. Then the Loewe Individual Sound Projector or a home network system can also be connected to the TV set (see page 43).

Article number 67406x80 67406x82 67406x42 67403x80 67403x82 67403x42 67407x80 67407x82 67407x42
Digital Recorder DR+ – – z – – z – – z
Media Network – z z – z z – z z
Single DVB-T/C z z – z z – z z –
Dual DVB-T/C – – z – – z – – z
USB-Anschluss 1x 2x 2x 1x 2x 2x 1x 2x 2x
{
– – { – – { – – {
– { { – { { – { {
– { { – { { – { {
The code number 3001 cancels a secret code
{ available as a upgrade kit
and thus the parental
lock. Please keep
in a safe place.
z ex factory · – not available

0-9 24p movie display: Modern movie makers produce movies with 24 (full) pictures per second (24p), conventional TV sets (and most DVDs) show 50 (half) pictures per second. To play the movie, the original number of pictures is doubled and the film sped up. This is optimal for sports broadcasts but for quieter movies it distorts the picture quality.
Dolby Digital: Digital multi-channel audio. The digital standard for high quality home movie systems. The individual channels are broadcast sepa rately in this standard. The three front channels right, left and centre, the two surround channels right and left and the external subwoofer channels are called a 5:1 signal. Another term for Dolby Digital is AC3. Digital Link HD: System for controlling devices via the HDMI connection of the Loewe TV set in the case of concealed installation. Dolby Pro Logic: Analogue multi-channel audio. Converts a Dolby- coded stereo signal into a surround sound. This usually contains four channels (front left, centre, front right, surround channel). A special subwoofer channel is not generated in this method. Dolby Pro Logic II: Analogue multi-channel audio. Dolby Pro Logic II is a further development of Dolby Pro Logic. This method generates a 6- channel spatial sound from a stereo or Pro-Logic signal (front left, centre, front right, surround left, surround right, subwoofer). Dolby Surround: Analogue multi-channel audio system that brings four audio channels down to two audio tracks with the aid of a matrix cod ing. Dolby Virtual Speaker: The Dolby Virtual Speaker technology simulates the surround playback of a real 5.1-channel playback with only two speakers. DTS: Digital Theater Systems; Digital multi-channel audio. DVB-C/-S/-T: Digital Video Broadcasting stands for digital television. Technical DVB is the standardised process for transmitting digital content (television, radio, multi-channel audio, room sound, EPG, Teletext, and other supplemental services) through digital technology. C stands for transmission via cable, S for distribution via satellite and T for terrestrial or antenna distribution. DVD: Abbreviation of Digital Video Disk and later Digital Versatile Disk. DVD-Preceiver: Combi-device of DVD player and radio without integrated amplifier. DVI: Digital Visual Interface, is an interface for transmitting digital video and graphic data (without audio). Dynamic contrast ratio: Here the light intensity of the display is adapted in case of a high black portion in the picture. The so-called backlights are dimmed automatically and the contrast ratio increases temporarily, i.e. dynamically.
A Active antenna: An antenna with its own power supply or amplification which can improve the reception is areas with a poor coverage. AV socket: Socket for audio and video signals. AV sources: Audio/video source. AVS: Audio/video sockets on the side of the TV set (cinch and mini-DIN).
B Band: Name for a transmission range.
C CA module: The Conditional Access module contains the coding system and compares the transmitted code with the one on the Smart Card. If they match, the appropriate stations or programmes are decoded. Cinch cable: Cable for transmitting audio or video. CI slot: See Common Interface. Common Interface: The Common Interface (CI slot) is a standardised interface. By inserting suitable decoding modules (CA modules) and a Smart Card coded digital programmes can be used. Component IN: Connection in which the video signal is transmitted via three separate cinch connections. It is made up of the brightness signal "Y“ and the colour difference signals "Pb“ and "Pr“. YPbPr is the original analogue version of the digital YCbCr in which video data saved on the DVD as well as transmitted via satellite, cable or antenna in DVB are colour coded. Conditional Access module: See CA module.
D Decoder: Analogue, coded TV signals are passed through a decoder and made visible again. Digital Link: System for controlling recorders (for video and DVD recorders from Loewe) via the Euro AV sockets of the Loewe TV set with concealed setup. Controlling the recorder for timer recordings. Digital Link Plus: System for controlling recorders according to protocol 50. For analogue stations the station and timer data are transmitted via the EURO-AV socket to the recorder. The timer recording is executed exclusively by the recorder. There is a different designation with different manufacturers.
E Electronic Programme Guide: See EPG. EPG: Electronic Programme Guide is the electronic variant of a printed TV guide. Using the EPG you can watch the TV programme of the TV sta tion, transfer the appropriate data. The list of programmes contains the title, beginning and end and duration of the programme. In addition brief descriptions of the content of the programmes is also displayed. Euro AV socket: Interface for connecting video devices to a TV set. This socket is also referred to as Scart socket.

F FLOF: Full Level One Facilities. Teletext system in which names and numbers of the jump destinations are transmitted in the bottom line on every page. This guides the reader to related topics for example. An information about which pages exist and which pages have sub-pages is not available in FLOF.
M MHEG-5: Digital teletext standard of the Multimedia and Hypermedia Expert Group. At the moment only available in United Kingdom and Ireland. Modulator: Transmitter in the video or DVD recorder so that the devices can receive signals via the tuner of the TV device. Mono: Single-channel audio. MPEG: Digital compression process for video. MP3: Data format for compressed audio files.
H HDCP: High-bandwidth Digital Content Protection. Coding system pro vided for the DVI and HDMI interfaces for secure transmission of audio and video data. HDMI: High Definition Multimedia Interface is a newly developed interface for full digital transmission of audio and video data. HDTV: High Definition Television is an umbrella term that covers a number of high resolution television standards. HD-Ready: A quality seal that is awarded to products that are capable of displaying high-definition television (HDTV). High band and Low band: Transmission ranges for satellites.
N Network ID: NID refers to the so-called programme ID number, also known as network ID – a number between 0 and 8191. This specification is necessary in specific cable networks of some countries. Then only DVB signals of this station network are searched for. NICAM: Audio standard. Is used in Denmark, England, France, Sweden, and Spain. NTSC: American colour standard.
I ID3 tags: Additional information for MP3 and WMA audio files. Informa tion about the singer, title, album and album cover can be saved here among other things. These data are edited on the PC by the ID3-Tag- Editor.
P Page Catching: For teletext, refers to going to and calling a page number. PAL: European standard. PCM: Pulse Code Modulation for digital sound. Picture in Picture: See PIP. PIP: Picture in Picture; a function which displays two pictures on the screen. Pixel: Denotes both the smallest unit of a digital graphic grid and its display on a screen with grid control. Pixel error: A pixel error is a defective pixel, usually on an LCD. Pixel errors may be caused by production errors. They are expressed for example by a constantly lit pixel or a constantly black pixel. Single defective pixels however are excluded from a guarantee. Progressive JPEG: Progressive JPEGs are built up gradually. The quality of the picture increases progressively during the loading process. ProScan/Progressive Scan: Progressive Scan (abbr. PS) or full picture method is a technique in the picture build-up of monitors, TV sets, beamers, and other display devices in which the output device is not sent line interlaced half pictures – unlike in the interlace technique – but real full pictures.
J JPEG: Joint Photographic Experts Group is a committee which has de veloped a standard method for the compression of digital photos. This method JPEG (JPG for short), named after the committee, is a commonly used graphic format for photos. JPG: See JPEG.
L LAN: Abbreviation for Local Area Network. Mainly used as a designation for networks with wiring (Ethernet). LCD: Liquid Crystal Display. LCN: Logical Channel Numbers. In stations with LCN, the channel location number belonging to the station is also transmitted by the provider. The stations are sorted according to these channel location numbers. L-Link: Intelligent system connection between Loewe devices for the automatic exchange of information. Makes the operation of TV and Loewe system components even more convenient. LNB/LNC: The crucial electronic component of a satellite antenna is referred to as an LNB (Low Noise Block Converter). It is mounted in the focal point of a parabolic antenna. The designation LNC (Low Noise Converter) indicates that conversion to lower intermediate frequency takes place. The supplemental block in the LNB refers to the fact that a whole frequency range (a block) is converted in each case.
R RGB: Colour signals red, green and blue.

S Satellite tuner: Receiver for satellite programmes. SDTV: Standard Definition TeleVision. Set-Top-Box: Set-Top-Box (STB for short) refers to a device in entertain ment electronics which is connected to another device, usually a TV set, and offers the user additional functional options. SECAM: French standard. Signal input groups: Depending on the applied signal, the signal sources are divided into different groups. All signal input groups with their cor responding signal types are the possible inputs are listed below.
T Terrestrial: In data transmission a wireless transmission that does not use satellites as intermediate station is referred to as terrestrial. TFT: Thin Film Transistor. One widely distributed application is control of liquid crystal flat screens, for which a signal transistor is used for each pixel. This design of display is also referred to as active matrix, however it is frequently also referred to as TFT display. TOP: Table of Pages. Teletext system in which the individual pages are divided into topics. The blocks stand for a higher hierarchy level (e.g. News, Sport, Programmes) and the groups for the level below (e.g. Home/Abroad, Football/Tennis). Abbreviations can be assigned to the pages which are displayed in colour on the bottom line and can be selected with the four coloured buttons on the remote control. Infor mation is also transmitted about which pages exist and which of them have sub-pages. Tuner: Another term for receiver.
TV analogue: Signal type: FBAS, YC, RGB-SD (480i/576i), Component-SD (480i/576i) Input: Tuner analogue, AV1, AV2, AVS, COMP. In
U USB: Universal Serial Bus. Serial bus system for connecting external devices (USB card reader, USB stick).
HD analogue: Signal type: RGB-HD (video mode: e.g.1920x1080, 1280x720), Component-HD (video modes: e.g. 1920x1080, 1280x720) Input: COMP. IN, PC IN
V VGA: PC interface for connecting a monitor. VPS: The Video Programme System (VPS) is a signal which transmits some (but not all) TV stations in the blanking gap. The signal is used by video and DVD recorders when recording programmes to react to delays in start time, programme changes and excesses of the planned programme time.
W WLAN: Abbreviation for Wireless Local Area Network. Also referred to in brief as wireless network.
PhotoViewer: Input: USB Signal strength: Strength of the received antenna signal. Signal quality: Quality of the incoming antenna signal. Smart Card: The Smart Card is an electronic chip card issued by the respec tive programme provider or by the certification-free Pay-TV operators. It contains the code which is decoded by the CA module. Static contrast ratio: Describes the difference between the brightest and darkest picture display. Stereo: Dual-channel audio. Switch voltage: Video devices specify this voltage to switch the TV device to playback. Symbol rate: Describes the transmission speed for data transmission.
Y Ycc/Ypp: Colour standards for Set Top Boxes. YCbCr: Digital colour model, see COMPONENT IN. YPbPr: Analogue colour model, see COMPONENT IN.



Loewe Opta GmbH, Customer Care Center Industriestraße 11 96317 Kronach, Deutschland Tel +49 1801–22256393 Fax +49 9261–99500 Email [email protected]
Loewe Austria GmbH Parkring 12 1010 Wien, Österreich Tel +43 - 1 22 88 633 - 0 Fax +43 - 1 22 88 633 - 90 Email loewe@loewe.co.at
ISSAGOGIKI EMBORIKI ELLADOS S.A. 321 Mesogion Av. 152 31 Chalandri-Athens, Hellas Tel +30 - 210 672 12 00 Fax +30 - 210 674 02 04 Email [email protected]
DONEO CO. LTD 34/36 Danny Cremona Street Hamrun, HMR02, Malta Tel +356 - 21 - 22 53 81 Fax +356 - 21 - 23 07 35 Email info@doneo.com.mt
Service Center Loewe ul. Verkhnaya Maslovka, d. 29 125083 Moscow, Россия Tel +7 - 495 612 50 43 Fax +7 - 495 612 47 10 Email [email protected]
International Dynamics Australasia Pty Ltd. 129 Palmer Street Richmond 3121, Victoria, Australia Tel +61 - 3 - 94 29 08 22 Fax +61 - 3 - 94 29 08 33 Email mail@international dynamics.com.au
SOMARA S.A. 377, Rue Mustapha El Maani 20000 Casablanca, Morocco Tel +212 - 22 22 03 08 Fax +212 - 22 26 00 06 Email [email protected]
Kjaerulff 1 AB Ridbanegatan 4, Box 9076 200 39 Malmø, Sverige Tel +46 - 4 06 79 74 00 Fax +46 - 4 06 79 74 01 Email Sweden@kjaerulff1.com
Kjaerulff 1 A/S C.F. Tietgens Boulevard 19 5220 Odense SØ, Denmark Tel +45 - 66 13 54 80 Fax +45 - 66 13 54 10 Email mail@kjaerulff1.com
Basys Magyarorszagi KFT Tó park u.9. 2045 Törökbálint, Magyar Tel +36 - 2341 56 37 (121) Fax +36 - 23 41 51 82 Email [email protected]
CableCom AS Ostre Kullerod 5 3241 Sandefjord, Norge Tel +47 - 33 48 33 48 Fax +47 - 33 44 60 44 Email [email protected]
BaSys Czech & Slovak s.r.o. Stará Vajnorská 17/A 831 04 Bratislava, Slovakia Tel + 421 2 49 10 66 18 Fax + 421 2 49 10 66 33 Email: [email protected]
Gaplasa S.A. Conde de Torroja, 25 28022 Madrid, España Tel +34 - 917 48 29 60 Fax +34 - 913 29 16 75 Email loewe@maygap.com
Plug&Play Bednjanska 8, 10000 Zagreb Hrvatska (Kroatia) Tel +385 1 4929 683 Fax +385 1 4929 682 Email [email protected]
Loewe Opta Benelux NV/SA Uilenbaan 84 2160 Antwerpen, België Tel +32 - 3 - 2 70 99 30 Fax +32 - 3 - 2 71 01 08 Email [email protected]
International Dynamics (NZ) Pty Ltd PO Box 109 317, Newmarket Auckland, New Zealand Tel +64 9 379 0179 Fax +64 9 379 0279 Email: enquiries@international dynamics.co.nz
ENKAY ELEKTRONIK SAN. Ve Tic. Ltd. Sti. Alemdag Cad: Site Yolu No.: 10 81230 Ümraniye/ Istanbul, Türkiye Tel +90 - 216 634 44 44 Fax +90 - 216 634 39 88 Email mhatipog@enkaygroup.com
Loewe Italiana SRL Largo del Perlar, 12 37135 Verona (VR), Italia Tel +39 - 045 82 51 611 Fax +39 - 045 82 51 622 Email Stefano.Borgognoni@ loewe.it
TEDRA TRADING OY Kuusemetsa 3 Saue 76506, Estonia Tel +372 - 50 14 817 Fax +372 - 67 09 611 Email raivo@futurehifi.com
Darlington Service Kn. Klementina Street, bl. 193 1618 Sofia, Bulgaria Tel +359 - 2 955 63 99 Fax +359 - 2 955 63 99 Email sac@audio-bg.com
Loewe Opta France S.A. 13 rue du Dépôt, Parc del l‘Europe, BP 10010 67014 Strasbourg Cédex, France Tel +33 - 3- 88 79 72 50 Fax +33 - 3- 88 79 72 59 Email [email protected]
Mayro Magnetics Portugal, Lda. Rua Professor Henrique de Barros Edifício Sagres, 2º. C 2685-338 Prior Velho, Portugal Tel +351 - 21 942 78 30 Fax +351 - 21 942 78 30 Email [email protected]
Dubai Audio Center P.O. Box 32836, Sheik Zayed Road Dubai, UAE Tel +971 - 4 343 14 41 Fax +971 - 4 343 77 48 Email dacdubai@emirates.net.ae
PL Trading (pz 2004) Ltd. 27, Aliat Hanoar St. Givataiim 53401, Israel Tel +972 - 3 - 57 27 155 Fax +972 - 3 - 57 27 150 Email zeev@loewe.co.il
Telion AG Rütistrasse 26 8952 Schlieren, Schweiz Tel +41 - 44 732 15 11 Fax +41 - 44 732 15 02 Email [email protected]
THE SOUNDLAB (PTY) LTD P.O. Box 31952, Kyalami 1684 Republic of South Africa Tel +27 - 1 14 66 47 00 Fax +27 - 1 14 66 42 85 Email loewe@mad.co.za
Origo Ltd Unit 23 Magna Drive Magna Business Park, City West Dublin 24, Republic of Ireland Tel +353-1-4666700 Fax +353-1-4666706 Email [email protected]
HADJIKYRIAKOS & SONS LTD. 121 Prodromos Str., P.O Box 21587 1511 Nicosia, Cyprus Tel +357 - 22 87 21 11 Fax +357 - 22 66 33 91 Email savvas@hadjikyriakos.com.cy
Kjaerulff 1 OY Uudenmaantie 100 20760 Piispanristi, Finland Tel +358 - 20 751 3800 Fax +358 - 20 751 3801 Email jari@kjaerulff1.com
DSV TRADING SA Plac Kaszubski 8 81-350 Gdynia, Polska Tel +48 - 58 - 6 61 28 00 Fax +48 - 58 - 6 61 44 70 Email market@dsv.com.pl
Loewe UK Limited Century Court, Riverside Way Riverside Business Park, Irvine, Ayrshire KA11 5DD, UK Tel +44 - 1294 315 000 Fax +44 - 1294 315 001 Email enquiries@loewe-uk.com
Avitech Co. SRL 1/II Pipera Tunari St. 007190 Voluntari, Ilfov, Romania Tel +40 - 21 200 64 64 Fax +40 - 21 200 64 65 Email [email protected]
A Cappella Ausros Vartu 5, Pasazo skg. 01129 Vilnius, Lithuania Tel +370 - 52 12 22 96 Fax +370 - 52 62 66 81 Email: [email protected]
K+B PROGRES A.S. U Expertu 91 25069 Klicany u Prahy, Česko Tel +420 2 72 12 21 11 (222) Fax +420 2 72 12 22 39 Email [email protected]
© by Loewe Opta 071205
Pages referenced in this manual — manufacturer, support and downloads.
Common problems, likely causes, and what to do.
| Problem | Possible cause | Remedy | |
|---|---|---|---|
| All menus are displayed in the wrong language. | The menu language was set incorrectly. | Set the menu language: Press the INFO button in TV mode (Index). Mark the first key word and call it with OK. Then select the language and confirm it with OK. | p.55 |
| In the TV menu, Connections cannot be called (displayed in grey). | A timer recording is in progress. | Wait until the timer recording ends or delete the timer recording (page 45). | p.55 |
| The control functions of the Loewe Recorder and the Timer are not working or are not working properly | a) The Digital Link function is not activated or not possible in the recorder. b) EURO-AV cable is not connected. c) Recorder is not logged in. | a) Activate Digital Link in the recorder (see operating instructions of the recorder). b) Connect EURO-AV cable (page 37). c) Register recorder (page 37). | p.55 |
| General problems when connecting external devices via an AV input. | a) The device is not logged in to the connection wizard or is connected differently than is shown in the connection diagram. b) The AV standard is set incorrectly. c) The signal type is set incorrectly. | a) In the connection wizard (TV menu → Connections → New devices/modifications) compare the connection diagram with the actual installation and connect as illustrated (page 37). b) Set the correct standard (page 17). c) Set the correct signal type (page 37). If for AV standard or AV signal "Automatic" is set then this can cause errors to be detected with signals that do not comply with standards. In this case standard and signal must be set according to the information in the operating manual of the external device. | p.55 |
| The connection of a decoder does not function or does not function properly. | a) The signal is not decoded because the correct decoder stations have not been selected in the connection wizard. b) In decoder mode the sound is missing because the wrong decoder sound has been assigned in the connection wizard. | a) Follow the instructions in the connection wizard (TV menu → Connections → New devices/changes) and select the appropriate decoder transmitter (page 37). b) Follow the instructions in the connection wizard and select the right audio source (Decoder, TV oder Autom.) (page 37), see also decoder instructions. | p.55 |
| The connection of a decoder does not function or does not function properly. | p.55 | ||
| Digital Link Plus does not work. | a) EURO-AV cable is not fully wired (pin 10 not wired). b) Some recorders can only adopt stations during the initial installation of the TV set. | a) Replace the EURO-AV cable. b) Restore the recorder to the as-delivered state (see recorder's operating manual). | p.56 |
| With Teletext various character sets are displayed incorrectly. | The wrong character set has been set in the Teletext menu. | Set the right character set: Teletext menu → Settings → Character set: Select Standard or the appropriate character set. | p.56 |
| No sound via the external digital audio amplifier. | a) The external digital audio amplifier does not support the selected sound format (Dolby Digital, dts, MPEG). b) TV set and external digital audio amplifier are not connected with each other. | a) Set PCM stereo on the DVD player in the sound selection. For DVB stations on the TV set switch to stereo in the status display (END) – language/audio selection (Green button). b) Connect AUDIO DIGITAL OUT from the TV set to a Digital-In input of the external digital audio amplifier and select the appropriate input to this. | p.56 |
| The picture of a connected external recorder is visible but the timer cannot be called. | The device is not registered in the connection wizard or is connected differently to shown in the connection diagram. | In the connection wizard (TV menu → Connections → New devices/modifications) compare the connection diagram with the actual installation and connect as illustrated (page 37). | p.56 |
| Photo on the USB stick is not displayed correctly in the PhotoViewer or a "?“ appears. | The photo is not available in a displayable format. | Convert photo file into a standard JPG format on the PC. | p.56 |
| Photo on the USB stick is not displayed correctly in the PhotoViewer or a "?“ appears. | p.56 |
Owners and our team usually reply within a day — and your question helps the next person too.
Be the first to ask — other owners or our team will answer.