EN
Loewe logo
Official user manual

Loewe ConceptL26Basic

44 pages·5.8 MB·Flat Panel Television·PDF·ENDEFRITNLJA
Loewe ConceptL26Basic
Table of Contents 80 sections Operating instructions · TV · Contents · Remote control - TV functions · … ShowHide
Operating instructionsp.1TVp.1Contentsp.2Remote control - TV functionsp.3P–p.3P+p.3V+p.3Control Unitp.4Connections to rear panelp.5Welcomep.6Thank you!p.6Transportingp.6Installation optionsp.6As a desktop unitp.6As a wall-mounted unitp.6Integrated featuresp.6Scope of deliveryp.6Note on the LCD screenp.7Cleaningp.7Disposalp.7Packing and boxp.7The setp.7For your safetyp.8First installationp.9Remote controlp.9Connectionp.9Batteriesp.9Power mainsp.9Antennasp.9Note on disposing batteriesp.9Setting up the remote control for operating the TVp.9Using the Conditional Access module (Only for sets with CI slot)p.10Handling the fabric hose (optional)p.10Switching onp.10Automatic programmingp.11DVB-T ANT TVp.11DVB-C ANT TVp.11DVB-S ANT SATp.11Station sortingp.11Daily operationp.12Directing DVB-T antennap.12Switching on/offp.12RADIOp.12... via the station listp.13... with the numeric buttons of the remote controlp.13Call last viewed station (for DVB-T stations in GB)p.13Basics about the menu operationp.14Example of the menu operationp.14MENUp.14INFO ENDp.15INFOp.16ENDp.16P+ P–p.16This is how to select the index item:p.16AVp.16Picture settingsp.17Direct control on TV setp.17Switching station on the TV setp.17Other sound settings:p.17Operating modes – TVp.18How the coloured keys work in TV modep.18END INFOp.18Calling the indexp.18Show status displayp.18Call additional functionsp.19TV menup.19Call timer overviewp.19TEXTp.19Select picture formatp.19Under “Connections“ you will find the following functions:p.19Move picture up/downp.19Under “Settings“ you will find the following functions:p.20DVB subtitlesp.20Searching for new softwarep.21Inserting a new CA modulep.21Calling the CA module menup.21Downloading softwarep.21Installing new DVB softwarep.21Software is recognised automaticallyp.21Operating modes – PIPp.22
Page 1 of the Loewe ConceptL26Basic user manual — Operating instructions
Page 1 · click to enlarge
Page 1
Loewe ConceptL26Basic — Operating instructions diagram (page 1)
Fig. 1 · Operating instructions
Loewe ConceptL26Basic — Operating instructions diagram (page 1)
Fig. 2 · Operating instructions

Operating instructions

TV

Loewe ConceptL26Basic — Operating instructions diagram (page 1)
Fig. 3 · Operating instructions

Concept L 32 Basic

Concept L 26 Basic

233–32506.024

Loewe ConceptL26Basic — Operating instructions diagram (page 1)
Fig. 4 · Operating instructions

Concept L 32 · Concept L 26

Page 2 of the Loewe ConceptL26Basic user manual — Table of Contents
Page 2 · Contents
Contents

Contents

Operating instructionsp.1TVp.1Contentsp.2Remote control - TV functionsp.3P–p.3P+p.3V+p.3Control Unitp.4Connections to rear panelp.5Welcomep.6Thank you!p.6Transportingp.6Installation optionsp.6As a desktop unitp.6As a wall-mounted unitp.6Integrated featuresp.6Scope of deliveryp.6Note on the LCD screenp.7Cleaningp.7Disposalp.7Packing and boxp.7The setp.7For your safetyp.8First installationp.9Remote controlp.9Connectionp.9Batteriesp.9Power mainsp.9Antennasp.9Note on disposing batteriesp.9Setting up the remote control for operating the TVp.9Using the Conditional Access module (Only for sets with CI slot)p.10Handling the fabric hose (optional)p.10Switching onp.10Automatic programmingp.11DVB-T ANT TVp.11DVB-C ANT TVp.11DVB-S ANT SATp.11Station sortingp.11Daily operationp.12Directing DVB-T antennap.12Switching on/offp.12RADIOp.12... via the station listp.13... with the numeric buttons of the remote controlp.13Call last viewed station (for DVB-T stations in GB)p.13Basics about the menu operationp.14Example of the menu operationp.14MENUp.14INFO ENDp.15INFOp.16ENDp.16P+ P–p.16This is how to select the index item:p.16AVp.16Picture settingsp.17Direct control on TV setp.17Switching station on the TV setp.17Other sound settings:p.17Operating modes – TVp.18How the coloured keys work in TV modep.18END INFOp.18Calling the indexp.18Show status displayp.18Call additional functionsp.19TV menup.19Call timer overviewp.19TEXTp.19Select picture formatp.19Under “Connections“ you will find the following functions:p.19Move picture up/downp.19Under “Settings“ you will find the following functions:p.20DVB subtitlesp.20Searching for new softwarep.21Inserting a new CA modulep.21Calling the CA module menup.21Downloading softwarep.21Installing new DVB softwarep.21Software is recognised automaticallyp.21Operating modes – PIPp.22
Page 3 of the Loewe ConceptL26Basic user manual — V+
Page 3 · click to enlarge
Page 3

Remote control - TV functions

Loewe ConceptL26Basic — Remote control - TV functions diagram (page 3)
Fig. 5 · Remote control - TV functions

Switch on/off - on standby

Loewe ConceptL26Basic — Remote control - TV functions diagram (page 3)
Fig. 6 · Remote control - TV functions

Switch over to operate VCR

Switch over to operate DVD player

Switch over to operate TV set

Menu "Additional functions" on/off

Select station directly /in the menu: enter numbers or letters

Electronic Programme Guide Now&Next Programme Info (2

PIP on/off (picture in picture)

Status display on/off (2 /in the menu: hide menu

Teletext on/off (2 Show/hide menu

Open index /in the menuinfo texts on/off
Loewe ConceptL26Basic — Remote control - TV functions diagram (page 3)
Fig. 7 · Remote control - TV functions
Loewe ConceptL26Basic — Remote control - TV functions diagram (page 3)
Fig. 8 · Remote control - TV functions

P+/P– Select station up/down

P–

P–

P+

P+

for PIPPosition of the PIP picture / in the menu: select/set

Station list on /in the menu: confirm/call Blue button: (2 programme info off/on

V+

V+

Red button(2 freeze picture on/off
Green button(2 Standard settings
Yellow button(2 previous station

Select station down / in the Wizard: back

Select station up Freeze picture off

(2 with DVB-T stations in GB different function. The coloured keys do not work as described with DVB-T stations in GB, but they operate as described on page 27 (Digital Teletext).

(1 Radio only for DVB reception if broadcast by the station Alternative remote control

Show 13 more labels / short text on this page
Sound off/on · Picture menu on/off · Sound menu on/off · Call timer list · Radio on/off (1 · Set picture format · Call AV selection · V–/V+ Volume down/up · for picture/sound · Direct recording · Freeze picture on/off · Freeze picture on · -
Page 4 of the Loewe ConceptL26Basic user manual — Control Unit
Page 4 · click to enlarge
Page 4

Control Unit

Loewe ConceptL26Basic — Control Unit diagram (page 4)
Fig. 9 · Control Unit

LOEWE.

Loewe ConceptL26Basic — Control Unit diagram (page 4)
Fig. 10 · Control Unit

Audio input left Call the menu, in the menu: up/down

Display: red = standby green = operation orange = operation without screen display (radio mode, EPG data capture or timer recording)

Audio input right · -

Page 5 of the Loewe ConceptL26Basic user manual — Connections to rear panel
Page 5 · click to enlarge
Page 5

Connections to rear panel

Loewe ConceptL26Basic — Connections to rear panel diagram (page 5)
Fig. 11 · Connections to rear panel

R C AV 1 RGB / Y UV ( ) AV 2 ANT -TV

R C AV 1 RGB / YUV ( ) RGB / YUV AV 2 ANT-TV

C / P r r Y C / P b b

C / Pr / /P Y C / P b b / /P

(1 Set-specific equipment and retrofitting options for CI-Slot, PIP and satellite tuners, see pages 41 and 42.

Common Interface (1 · (CI-Slot) · -

Page 6 of the Loewe ConceptL26Basic user manual — Scope of delivery
Page 6 · click to enlarge
Page 6

Welcome

Thank you!

Transporting

At Loewe, we combine the highest standards of technology, design and user friendliness. This applies equally for TV, video and accessories. Your new TV set is ideally equipped for the TV standard of the future - ”HDTV” (High Definition Television). With its high-resolution screen and the future-proof digital interfaces HDMI , you have the option to view HD content with excellent picture quality. It therefore carries the European quality mark ”HD ready”. Digital TV is steadily spreading via terrestrial reception, in the cable network and via satellite. Loewe supplies sets equipped with DVB-T and DVB-C (DVB-C not for GB). A digital satellite tuner (DVB-S) can be retrofitted. The DVB integrated within the TV set is operated via the TV set menus using the remote control. We have designed this TV set so that it is easy to operate by using menus. Information about settings in menus is shown automatically; this enables you to understand the context quickly. You will find the answers to many of your technical queries in the index of your TV. If you want to operate the TV, you can access functions directly from the in dex. This saves you from having to read through detailed operating instructions and is the reason why this operating manual only explains the most important operating steps.

Only transport the unit in an upright position. Hold the set by the top and bot tom edges of the housing. The LCD screen is made of glass and/or plastic and may break if not handled carefully. Should the LCD screen become damaged or should the liquid crystal begin to leak, then it is imperative you wear rubber gloves when removing the set. Should the liquid come in contact with your skin, thoroughly rinse with water immediately.

Installation options

As a desktop unit

The foot is included in delivery.

As a wall-mounted unit

Wall holder WM55 for Concept L26 / Concept L26 Basic, Loewe order no. 65497 A00.

Wall holder WM54 for Concept L32 / Concept L32 Basic, Loewe order no. 65498 A00.

Integrated features

The maximum equipment is described in these operating instructions. Functions indicated by are not available in all TV sets. Menu contents may differ from the ones shown, depending on how your TV is equipped. You can display how your set is equipped in the “Integrated features“ index (press the INFO button in the TV mode if no menu is displayed; the “Integrated features“ menu item is also displayed in the index before the initial letter A).

Scope of delivery

LCD-TFT TV set Mains cable RC4 remote control with 2 batteries Table stand Marketing and service card These operating instructions

-

Page 7 of the Loewe ConceptL26Basic user manual — The set
Page 7 · click to enlarge
Page 7

Welcome

Note on the LCD screen

The TV set with an LCD screen you have purchased meets the highest quality requirements and has been tested for pixel errors. Despite the utmost caution in production of the displays, it cannot be totally ruled out that some of the pixels might be defective for technological reasons. Please understand that such effects cannot be considered a unit defect as defined by the warranty as long as they are within the limits specified by the standard.

Cleaning

Use only a soft, clean, damp cloth to clean the TV set, the screen and remote control (do not use any caustic or abrasive cleaning agents).

Disposal

Packing and box

You have chosen a long lasting technical product of very high quality. We have paid a fee to authorised recyclers who will collect the packing from your dealer for disposal, pursuant to domestic regulations. Nevertheless, we recommend you to keep the original box and packing material for optimum protection if you have to transport the set.

The set

Attention: The EU directive 2002/96/EC regulates the proper way to recycle, handle and utilise used electronic devices. Hence, all used electronic devices are to be disposed of separately. Please do not dispose of this set in the normal household rubbish. You may return your used set free of charge at designated recycling centres or at your specialist dealer whenever you purchase a new, comparable set. You can find out more about recycling (also for countries out side the EU) from your local government.

-

Page 8 of the Loewe ConceptL26Basic user manual — For your safety
Page 8 · click to enlarge
Page 8

For your safety

For your safety and to avoid unnecessary damage to your TV set, please read and observe the following safety instructions:

  • Prevent any metal parts, needles, paper clips, liquids, wax or the like from getting into the TV set through the air venting slits in the rear panel. This can lead to short-circuits and possibly to fire. If something should get into the inside of the TV set, pull out the plug immediately and notify customer service.
  • This TV set is designed exclusively for reception and reproduction of video and audio signals.
  • This equipment is designed for domestic and office environments and must not be used in rooms with high humidity (e.g. bathroom, sauna) or high concentrations of dust (e.g. workshops). If the equipment is used in the open air, ensure that it is protected against moisture (rain, drips, splashes, sprayed water or dew). Do not place any containers filled with liquids or lit candles on top of the TV. High levels of moisture and concentrations of dust cause leakage currents in the equipment, which can lead to danger of electric shock or fire. The manufacturer‘s warranty is only valid for use in the specified permissible environment.
  • Never remove the back of the TV set yourself. Repair and servicing of your TV set should only be carried out by authorised TV technicians.
  • Place the TV set on a level, firm base. The set should not protrude at the front when installing in cabinets or shelves. Only use original accessories if possible, e.g. Loewe wall holders and stands. Never let children handle the TV unattended. Do not allow children to play in the immediate vicinity of the TV, they could knock, shift or pull it over and injure someone. Never leave the TV on unsupervised.
Loewe ConceptL26Basic — For your safety diagram (page 8)
Fig. 12 · For your safety
Loewe ConceptL26Basic — For your safety diagram (page 8)
Fig. 13 · For your safety
  • Do not install the TV where there may be vibrations. Vibrations can lead to material stress.

LOEWE.

  • Pull out the power and antenna cables during thunderstorms. Surge volt ages caused by lightning strikes can damage the TV through the antenna system and the mains. Also remove the antenna and mains plugs in long periods of absence.
  • The mains plug of the TV set must be easily accessible so that the set can be disconnected at any time.
  • If you have moved the TV set out of the cold into a warm environment, leave it standing for about an hour since condensation may form.
  • Lay the mains cable in such a way that it will not be damaged. The power cable may not be kinked or laid over sharp edges, not stood on and not ex posed to chemicals, the latter also applies to the device as a whole. A mains cable with damaged insulation can lead to electric shocks and is a fire risk.
  • This equipment must only be connected to a mains power supply which has the same voltage and frequency as that specified on the rating plate; use the power cable provided. Incorrect voltages can damage the equipment.
  • Like all electronic equipment, your TV needs air for cooling. Obstruction of the air circulation can cause fires. Therefore the air vents on the back must always be kept free. Please do not place newspapers or cloths on/over the TV. If the TV is placed in a cabinet or on a shelf, leave at least 10 cm at the sides and 10 cm at the top to ensure suf ficient air circulation. Position the set so that it is not exposed to direct sunlight and additional heating from radiators.
  • When removing the mains plug, pull the plug housing and not the cable. The wires in the plug could be damaged and cause a short circuit the next time it is plugged in.

The rating plate of the TV is on the rear of the set.

Loewe ConceptL26Basic — For your safety diagram (page 8)
Fig. 14 · For your safety

10 cm 10 cm

LOEWE.

10 cm · -

Page 9 of the Loewe ConceptL26Basic user manual — Setting up the remote control for operating the TV
Page 9 · click to enlarge
Page 9

First installation

Remote control

Connection

Loewe ConceptL26Basic — First installation diagram (page 9)
Fig. 15 · First installation
Loewe ConceptL26Basic — First installation diagram (page 9)
Fig. 16 · First installation

Batteries

Power mains

To insert or change the batteries, press on the arrow. Slide the battery compart ment cover downwards and remove it. Insert LR 03 alkaline-manganese batter ies (AAA) and ensure that the + and - ends are positioned correctly.

Connect the TV set to a 220-240V/50- 60 hertz power outlet. Plug the small plug of the mains cable into the mains socket on the rear of the TV set; plug the large mains plug into a mains socket.

Antennas

Plug the antenna plug of your antenna/cable system or the room antenna for DVB-T into the ANT-TV socket.

Loewe ConceptL26Basic — Antennas diagram (page 9)
Fig. 17 · Antennas

Then push the cover back on from the bottom.

Note on disposing batteries

The batteries provided contain no harmful materials such as cadmium, lead or mercury. Regulations concerning used batteries stipulate that batteries may no longer be thrown out with the household rubbish. Deposit any used batteries free of charge into the designated collection containers set up at commercial businesses.

Setting up the remote control for operating the TV

Push the TV button. TV

How to operate other equipment is described as of page 36.

-

Page 10 of the Loewe ConceptL26Basic user manual — Switching on
Page 10 · click to enlarge
Page 10

First installation

If the reception conditions are good, then a room antenna may be used for DVB-T. Passive and active room antennas are available on the market. The power is supplied for an active antenna via the antenna connection. For auto matic programming or in “TV Menu – Connections – Antenna DVB – Antenna DVB-T,“ the distribution voltage (5 volts) is to be set correspondingly. It may be practical to use a nondirectional antenna. If the location is outside the normal transmitting range, then a unidirectional antenna may also be used to improve the reception quality. You can find out more on the digital stations that can be received in your area at your specialist dealer.

Using the Conditional Access module (Only for sets with CI slot)

In order to be able to receive encrypted digital stations, a Conditional Access module (CA-module (1) and a Smart Card (1, if necessary, must be inserted into the corresponding slot of your TV set. You can find the Common Interface slot (CI-Slot) on the back of your TV set, see the illustration on page 5.

1. Make sure the TV set is switched off with the mains switch on the set.
2. First push the Smart Card into the CA-module as far as it will go. Insert it so that the side with the golden contact chip faces the side of the module printed with the supplier‘s brand logo. Printed arrows indicate how to insert the card. Also follow the instal lation instructions included with the Smart Card.
Loewe ConceptL26Basic — Using the Conditional Access module (Only for sets with CI slot) diagram (page 10)
Fig. 18 · Using the Conditional Access module (Only for sets w…

If a set was retrofitted with a PIP tuner, then plug the antenna into the antenna input of the PIP tuner and connect the PIP tuner output with the ANT-TV socket (Tuner 1). See illustration on page 5. Set-specific equipment and retrofitting options for CI-Slot, PIP and satellite tun ers, see pages 41 and 42.

If a Digital Satellite Tuner has been retrofitted, connect your satellite antenna system to the ANT-SAT socket.

3. Push the CA module carefully into the slot contact side first. When you are standing in front of the TV set, the logo on the CA module must face the rear. Make sure the module is not twisted in the process. Do not use force. When the module locks, the eject button is pressed outwards.

When laying the cable, use the cable clips affixed beneath the TV set.

Handling the fabric hose (optional)

Use the fabric hose for tidy laying of the power cables, antenna cables or cables of other electronic components and lay the hose with the cables to the connecting sockets. This provides you with an elegant solution when laying cables. The diameter of the fabric hose increases when you push it to gether lengthwise (see illustration). This makes it easier for you to push through cables with plugs.

Loewe ConceptL26Basic — Handling the fabric hose (optional) diagram (page 10)
Fig. 19 · Handling the fabric hose (optional)

(1 The CA-module and the Smart Card are not included

in the scope of delivery of this set; you can usually obtain them at your specialist dealer.

Switching on

Switch the TV set to standby with the Mains switch on the front behind the flap. The red indicator on the set now lights up (standby mode).

You can obtain the fabric hose as an accessory from your Loewe dealer or Loewe Customer Service.

From standby (red LED lights) it is best to switch on the TV with the blue On/Off button or a numeric button on the remote control.

Show 4 more labels / short text on this page
Contact side · Eject button · CI-Slot · CA module
Page 11 of the Loewe ConceptL26Basic user manual — Station sorting
Page 11 · click to enlarge
Page 11

First installation

Automatic programming

If you only receive one satellite ... 8. In the following menu, specify whether the station search should take place in the high and low band (“Yes“) or only in the low band (“No“). Note: For most satellites, a station search is required in both bands. 9. For the low band and high band, the standard frequencies 9750 MHz (9.75 GHz) and 10600 MHz (10.6 GHz) are preset. If your satellite antenna is equipped with an LNC (LNB) with a divergent oscillator frequency, specify the corresponding frequency for low and high band respectively. Note: The correct display of the received frequencies in the “TV menu – Set tings – Stations – Manual adjustment“ depends upon this setting. 10. You should receive a picture with sound with the settings previously made (only for ASTRA 1 and HOTBIRD). Then press OK. 11. In the “Pre-programming“ menu, select the factory-set pre-programming to programme the satellite stations quickly. To ensure all stations that can be currently received are searched for and saved, select “No“ at this point. Symbol rates: The standard symbol rates 22000 and 27500 are preset. If you would like to receive stations with different symbol rates, specify the cor responding values here using the numeric buttons on your remote control. 12. Press OK to obtain an overview of the settings with which the automatic programming is to take place. 13. Press the OK button again and the station search will start. The TV set searches for, sorts and saves all the TV stations that can be received, accord ing to your settings and the antennas connected. 14. When the TV stations are saved, you will receive a corresponding message. 15. Press the OK button and the set then searches for the radio stations. 16. The TV set searches for, saves and sorts all radio stations which can be received with your antenna system. 17. Then log on your video equipment, decoder and audio system using the connection wizard and connect these to the TV according to the connection diagram displayed. If you want to connect other equipment later, you can find information as of page 29.

Automatic programming of the TV set is started the first time you switch it on. Follow the menus.

By pressing in one of the arrow directions, you can choose the settings ...

... and confirm your settings by pressing OK. You then go to the next menu.

Back to the previous menu.

1. First you have to select the menu language. 2. By pressing the OK button, you can call the menu “Connect antenna cable(s)“. If you want to receive digital stations via satellite, then choose “DVB-S“ - confirm using the yellow coloured key. If you also want to re ceive digital terrestrial stations (DVB- T), then select “DVB-T“. Also select “Antenna/cable (analogue)“ - this way the standard analogue stations can also be searched for and saved. If you can receive digital stations from the cable network, then select “DVB-C“ using the yellow coloured key. 3. For the country-specific station sorting and for presettings for DVB-T and DVB-C, enter the location at which the TV set is operated. 4. If you have selected “DVB-T“, you then reach the menu “Antenna DVB-T“. If you use an active antenna, then select “yes (5V)“. 5. If you have selected „DVB-C“, you generally leave the symbol rates and modulation types unchanged. If other symbol rates are used in your cable network for broadcasting, enter the values with the numeric buttons of the remote control. If only one symbol rate is used, enter the same value for both symbol rates. If other modulation types are used for broadcasting in your cable network, select them in the menu. If only one modulation is used, select „none“ for modula tion type 2. If necessary, ask your specialist dealer about the necessary settings for your cable network. 6. In the “Select satellite installation“ menu, make the selection that corre sponds to your satellite antenna installation. Note: If you have any questions on how your satellite antenna installation is configured and on the antenna settings, consult your antenna installer or your specialist dealer. 7. Select the satellite the antenna is directed at, such as ASTRA1.

Initial installation Connect antenna cable(s)

Antenna cable(s) forto antenna socket(s):

Antenna/cable (analogue) ANT TV

DVB-T ANT TV

DVB-C ANT TV

DVB-S ANT SAT

You can repeat the initial installation at any time, e.g. after moving house. Call the index using the INFO button (in the TV mode, if no menu is opened). Select the index item “Repeat initial installation“ (you will find this listed separately before the letter A). Press OK to start the initial installation.

Station sorting

Connect/disconnect · Proceed Back OK

Page 12 of the Loewe ConceptL26Basic user manual — RADIO
Page 12 · click to enlarge
Page 12

First installation

Daily operation

Directing DVB-T antenna

Switching on/off

Your TV is equipped with an eco-standby power supply unit. On standby, the power consumption drops to low power. If you want to save even more electric ity, switch the set off with the mains switch. However, please bear in mind that EPG data (electronic programme guide) will be lost and programmed timer recordings will not be performed by the TV.

Switching off If the TV set is switched on, you can switch it to standby using the blue ON/OFF button on the remote control. The red lamp on the TV set lights up. If the orange indicator lights up, a timer recording is being made, EPG data is being captured or radio operation without screen display is active.

ialist dealer to find out which channels and frequency bands used to broadcast the digital TV stations in your area. el, several digital stations are broadcast. annel enu“ via the MENU button. elect “Settings“, then use 6 to select the menu line s“, then use 6 to select the menu line underneath. TV menu TV menu Settings StationsINFO END Parental lock Timer functions Language Manual adjustment ...

Switching on the TV set From standby, it is best to switch the set back on using the blue On/Off button or by using the numeric buttons of the remote control (0 – 99). The green indicator on the TV set lights up.

Or switch on the TV set with OK, you can then see the station list and select a station.

Manual adjustment Signal source DVB-T Channel E 05 Fr e quenc y 177.50 MHz Name Te s t Bandwidth 7 MHzDVB-C Antenna/cable (analogue) C/N 96 Level 99 END ions, select “Signal source – DVB-T“.

Switching the radio on With the RADIO button on the remote control.

RADIO

If you switch off the TV set using the mains switch

on the set, the indicator no longer lights up.

If the TV set is switched off via the mains switch, you have to switch it into the standby mode fi rst via the mains switch and then switch it on using one of the above mentioned methods.

Page 13 of the Loewe ConceptL26Basic user manual — Call last viewed station (for DVB-T stations in GB)
Page 13 · click to enlarge
Page 13

Daily operation

Loewe ConceptL26Basic — Daily operation diagram (page 13)
Fig. 20 · Daily operation

... via the station list

Loewe ConceptL26Basic — ... via the station list diagram (page 13)
Fig. 21 · ... via the station list

COMP. IN HDMI/DVI VGA AVS DVD VCR 0 VIDEO 1 ARD 2 ZDF 3 SAT.1 4 RTL 5 VOX

6 3SAT 7 S–RTL 8 N–TV 9 DSF 10 TM3 11 PRO7 12 RTL 2 13 WDR 3 14 BR 15 HR 16 MDR 3 17 N 3

When changing, the station display is visible for a few seconds.

Switch to ... Scan stations 21:00 - 21:45 Eifellandschaft

If additional languages are broadcast with DVB stations, then the set displays the language/sound selection under the station display. Call the language/sound selection by using the green coloured key and select using 56.

Select the station (if possible, the selected station will be displayed as a small picture) or ...

... with the numeric buttons of the remote control

The set has a dynamic memory with 430 (with DVB 1680) station memory locations. If up to 9 stations are stored, you only need to enter one digit; up to 99 stations, two digits are needed; up to 999 stations, three digits are needed (refer to the station list to see how many stations have been stored).

1 digit stations Press buttons 0 -9 for one second, and the station changes instantly. Or press button 0 – 9 briefly, the station then changes after 2 seconds (the station changes immediately when only 9 stations are saved).

COMP. IN HDMI/DVI VGA AVS DVD VCR ARD BR-ALPHA BR3

CNN INT. CAM DELUXE DSF EUROSPRT HOT HR KIKA

2- and 3-digit stations After briefly pressing the fi rst numeric button(s), keep the last numeric button pressed for one second, the station then changes immediately. Or press all numeric buttons briefly, the station then changes after 2 seconds (the station changes immediately if up to 99 or 999 stations are saved).

Switch to ... Scan stations 21:00 - 21:45 Eifellandschaft

For an alphabetical display: Enter letters with the numeric button (like on a mobile phone keypad), select with 6534 and call with OK. For bouquet display (sorting according to broadcasting chains, only for DVB stations, not for DVB-T stations in GB): Enter bouquet number, select with 6534 and call with OK.

4 digit stations Press the four numeric buttons briefly, the station then changes immediately.

abc pqrstuv all short

Call last viewed station (for DVB-T stations in GB)

Digital DVB-T stations are indicated by T , DVB-C stations by C and DVB-S stations by S . Encrypted stations are additionally indicated by . Ask your specialist dealer about decoders or the use of a CA module and a Smart Card for the reception of encrypted stations.

You can switch back and forth quickly between two stations using this button.

Show 4 more labels / short text on this page
pqrs · long · abc pqrs · short short long
Page 14 of the Loewe ConceptL26Basic user manual — V+
Page 14 · click to enlarge
Page 14

Daily operation

Basics about the menu operation

Loewe ConceptL26Basic — Daily operation diagram (page 14)
Fig. 22 · Daily operation

Menus are called via the MENU button or via the button for special menus and can be hidden by using these buttons or by using the END button. The menu is displayed in the bottom section of the screen. At the top, you can see additional information for the menu point selected. In the menus, navigate by using the cursor5634. You can make settings by using 34. When you exit the menu, the settings are adopted.

If you want to make other sound settings, move up with 5 to “Bass“ and select with 34, e.g. “more...“. You can also move up further to “Sound“ by using 5 and select other set tings in the TV menu (such as, picture settings).

Example of the menu operation

We shall demonstrate how to navigate with the menus using the TV menu as an example. You can see which buttons you can use in the dark blue field on your TV set.

Open TV menu (in TV mode).

MENU

Loewe ConceptL26Basic — MENU diagram (page 14)
Fig. 23

Picture Here you can adjust among other things: Contrast, colour, brightness, picture adjustment, sharpness, picture format.

Select the sound setting using 34, e.g. “Auto volume“ and ...

... use 6 to select the auto volume option.

Loewe ConceptL26Basic — MENU diagram (page 14)
Fig. 24

Use 34 to select “on“ and activate the auto volume.

Select the function in the TV menu, e.g. “Sound“ (for sound settings). Use 4 to move the menu points displayed on the right into the dark blue field; use 3 to move the menu points displayed on the left.

Apart from the TV menu shown here, other menus can be opened in TV mode as follows:

Call the Sound menu directly.

Select the sound function below with 6 or OK; you will then see a list of the sound settings.

Call the Picture menu directly.

Quick calls for teletext subtitles, personal text pages, head phone volume, scan stations and to move the picture up and down.

Green coloured key: Call standard settings for picture and sound.

In the sound settings, also select the function with 34, e.g. “Bass“ (for increasing or reducing the bass tones).

Using the volume control, you can also open other sound settings, such as Sound via, Sound adjustment, Sound effects and Loudness. The key 5 or OK must be pressed for the duration of the volume display for this.

P–

P+

To set the bass tones, use 6 or OK to select the setting bar underneath.

V+

Page 15 of the Loewe ConceptL26Basic user manual — INFO END
Page 15 · click to enlarge
Page 15

Daily operation

For the info system ...

Use 6 to select the line below, for example “Search wizard“. OK

Search wizard Use this menu to search for stations automatically once certain settings have been made. If you want to search for stations with other than the displayed settings, select the "Change settings" menu.

For each menu point, an info text is displayed at the top of the picture to help you with the setting. This saves you from having to refer back to the operating instructions. We shall demonstrate this using the station search option as an example:

Call the TV menu. MENU

Select “Settings“. OK

Settings Here, you can search for the stations automatically or manually as well as set the menu language, timer functions, parental lock, on-screen displays, etc.

INFO END

Search wizard Manual adjustment Change stations Stations

The info text explains how you are to proceed.

Upon delivery, the TV set is configured so that the info texts are always dis played (Automatic info “yes“). In this case, you can hide the info texts by using the INFO button. You can also configure the TV set so that you call the info texts when needed by using the INFO button (Automatic info “no“). You can find the setting to switch the automatic info option on or off via “TV menu under Settings – Miscellane ous – On-screen displays – Automatic info – yes/no“.

INFO END

TV menu Settings Conne ections Recording Sound Picture

Stations ...

In this example, you can see the options available after “Settings“.

If you want to search for new stations, for example, use 6 to select “Stations“ in the line below.

Stations The menu contains the automatic station search and the manual station setting. You can re-sort stations, enter and change station names and delete stations.

INFO END

Timer functions Parental lock Stations Language Mi

Search wizard ...

The info text indicates which settings you can make in “Stations“.

TV menu Settings · TV menu Settings

Page 16 of the Loewe ConceptL26Basic user manual — V+
Page 16 · click to enlarge
Page 16

Daily operation

For the index ...

For example, you want to have the TV set switch off automatically:

Select the index item “Switch off“ – “Automatic“.

Using the index, you can access many operational functions directly. You can also find a great deal of information on technical terms about television. Before the alphabetical sorting, you can find the menu language option, the list of features integrated into the TV set and the repeat initial installation option.

You can set your TV set to switch off to stand-by mode once or every day at a given time.

INFO

Call the index in the TV mode (without any other on-screen displays).

Switch off Automatic Manual Symbol rate* Teletext Activate Character set FLOF

You can select your language for operating the TV set.

END

Activate Previous/next letter ... Select letter Page /

P+ P–

Language Integrated features Repeat initial installation * Access code Active window (PIP) Automatic channel programming (ACP) AV (Audio/Video) Activate Previous/next letter ... Select letter Page /

Use the OK button to call “Switch off“ – “Automatic“.

Switch off today only If you want your TV set to switch off once automatically (to stand-by mode) select "yes" and enter the time.

END

P+ P–

Info on the index item selected is visible at the top of the picture. If the OK symbol is displayed in the line selected, you can use the OK button to access the menu directly and carry out settings or selections.

TV menu Settings Timer functions

This is how to select the index item:

INFO END

One-time reminder Switch off daily Switch off today only Wake

Enter the first letter using the numeric buttons on the remote control (like on a mobile phone keypad); or

no ...

AV

The corresponding menu “Timer functions“ is displayed (in the TV menu – Set tings). You can now choose between “Switch off today only“ and “Switch off daily“ and enter the time.

use 34 to go to the previous/next letter, or

P–

P+

use P+/P– to scroll up or down through the pages

V+

and use 65 to go from line to line.

Show 6 more labels / short text on this page
Index · a z · Index · a z · abc · wxyz
Page 17 of the Loewe ConceptL26Basic user manual — INFO END
Page 17 · click to enlarge
Page 17
Loewe ConceptL26Basic — Picture settings diagram (page 17)
Fig. 25 · Picture settings

Picture settings

Open the Picture menu

mo Sharpness Colour Contrast Picture Picture adjustment3

INFO END

normal ...

use 34 to select the picture function to be set and use 6for the related selection ...

by using 5 or OK, you can call other sound settings ...

INFO END

... and use 34 to set/select.

Picture settings: Picture adjustment, Contrast, Colour, Brightness, Sharpness. Under “more ...“, you can find settings for Picture format, Move picture up/down and Auto format.

Direct control on TV set

... and use 34 to make the selection/setting there.

Sound adjustment allows you to adjust the sound characteristics to the station‘s sound. The Sound effects settings allow you to expand a Dolby Pro Logic Signal to a virtual surround signal by using “Dolby Virtual“; by using “Panorama“, you can enhance the foundation of the stereo sound virtually for the loudspeakers.

On page 4, you can find an illustration of the control unit located on the set.

Switching station on the TV set

Station upwith the button +
Loewe ConceptL26Basic — Switching station on the TV set diagram (page 17)
Fig. 26 · Switching station on the TV set

Sound off; Sound on: Press button again or adjust volume.

In the radio or TV operating modes, you can make settings for Volume, Brightness, Contrast, Picture format and Stations. “Service“ is intended for the customer service department.

Other sound settings:

Operating mode Contrast Picture fo Direct control on TV set

Call the Sound menu

more ... Sound

INFO END

use – or + to select the function to be set

use 34 to select the sound function to be set and use 6for the related selection ...

Volume g mode Contrast Brightness Picture format Stat Direct control on TV set

INFO END Sound Bass

and use 34 to select/set.

Sound settings: Treble and bass. Different menu items are displayed depend ing on the connected audio device (AURO, hi-fi amplifier). Under “more ...“ you will find the sound selection for loudspeakers and headphones, auto volume, headphone volume, AV audio signal, maximum volume and balance.

Use to move one level up; you can use – or + to select other functions.

Show 5 more labels / short text on this page
Brightness · Picture · Colour 6 · + · Bass Treble 4
Page 18 of the Loewe ConceptL26Basic user manual — END
Page 18 · click to enlarge
Page 18

Operating modes – TV

TV

For the status display, the DVB station providers may offer additional selection options for each station. Thus, the corresponding colour key or the TEXT button is displayed:

In initial installation and daily operation, the TV set is in TV mode. This is also the case when none of the other modes of operation, such as EPG, Teletext, PIP or Radio, have been selected. Each of these operating modes has a separate menu with separate functions for the coloured keys. Call the menu via the MENU button.

Red: channel selection for multi-channel providers.

Green: language/sound selection.

Yellow: time selection.

How the coloured keys work in TV mode

Blue: protection of minors.

DVB subtitles. TEXT

Red: the TV picture freezes. Pressing this button again starts the picture moving again.

If you press one of the coloured keys during the status display or you press the TEXT button, the related selection menu is displayed. The status display subtitles refer only to the “DVB subtitles“ and are not provided by all stations. The options you see depend on the particular station (many stations broadcast subtitles via teletext). The status display is displayed automatically when a new programme begins with options different to the previous one.

Green: Call personal settings/factory settings for picture and sound, save picture and sound settings as personal settings.

Call up factory settings Store as pers Standard settings pict./sound

END INFO

Call up personal settings OK

Yellow: call last station viewed. You can switch back and forth quickly between two stations using this button.

  • Notes:
  • In the sound mode, Mono! means that you have switched manually from stereo to mono, for example.
  • The selection menus are only available as long as the status display is displayed. You can call them again at any time by pressing the END button on your remote control.

Blue: call programme info.

1 ARD Eifelland 14:30 - 15:15

Calling the index

Calling the index INFO

You can select your language for operating the TV set.

Detailed info (teletext) Programme info 14:43 Detailed info Programme preview (t

END

Language Integrated features Repeat initial installation * Access code Active window (PIP) Automatic channel programming (ACP) AV (Audio/Video) Activate Previous/next letter ... Select letter Page /

Show status display

1 ARD Eifellandschaft 14:30 - 15:15 Stereo

14:42 Alarm time 20:00 Sleep timer 23:00 Language/sound selection

END

P+ P–

In the line above, you can see the name of the station and the sound mode. Dis played below are additional options (Time, Sound mode, Alarm time and Sleep timer) that can be selected in the “TV menu – Settings – Miscellaneous – On- screen displays“.

You can find more information on the index on page 16.

Show 4 more labels / short text on this page
OK Activate · Index · Show/hide status END · a z
Page 19 of the Loewe ConceptL26Basic user manual — Move picture up/down
Page 19 · click to enlarge
Page 19

Operating modes – TV

Call additional functions

TV menu

Select additional functions such as Teletext subtitles, Personal teletext pages, Headphone volume, Scan stations and to move the picture up and down.

MENU

Call up the TV menu

INFO END

Settings Connections Recording Sound TV menu Picture

Picture adjustment ...

Teletext subtitles Personal teletext pages Headphone volume Additional functions

INFO END

You will find a description of the picture and sound settings on page 17. The TV menu offers other options for recording, connections and settings of the TV set.

Call timer overview

For a recorder that is logged in, you can find the following menus in the “Recording“:

If timer recordings have been programmed, you will see when which station is recorded here.

  • Recording wizard - to programme new timer recordings
  • Via EPG
  • Via teletext
  • Manual You will find further information about timer recording on page 30.

Timer list Fri 12.09./14:12 12.09. 18:00-18:30 3SAT Die Köchin, die Putzfrau und d

Timer list Here you will find a list of programmes programmed for recording. You can change the recording data or delete programmed recordings and programme new recordings.

TEXT

Detail New recording Change

END

INFO

Pre-record time and Post record time For recordings without VPS/PDC, set a lead and lag time here so that the pro gramme is fully recorded despite any slight differences in the time.

Select picture format

The TV set sets the best picture format automatically when Auto format is switched on. If you want to set a different format, press this button until the desired format is selected or select the format with 34.

Under “Connections“ you will find the following functions:

New devices/modifications (connection wizard) The connection wizard helps you connect and log in additional equipment such as video recorders, DVD players/recorders, camcorders/digital cameras, pay TV decoders, equipment with component signals and digital HDMI/DVI signals.

Zoom Cinema Panorama 16:9 Picture format

4:3

  • Antenna DVB (only for sets with DVB)
  • Antenna DVB-T
  • Antenna DVB-S (1 You can find more information on pages 11 and 12.

You can switch the panorama picture over to distortion-free representation on your TV set. Dark margins are then visible on the left and right of the picture.

Switching over: Keep the button on the set pressed, at the same time press the ”Picture format” button on the remote control briefly.

Digital Link Plus Transmission of the station data from the TV set to the video/DVD recorder if a recorder with Digital Link Plus is connected.

Resetting: Press the same button combination again.

Move picture up/down

  • Miscellaneous (connections)
  • Set AV norm for the connections manually (if it is not recognised automati cally).
  • “Assign audio digital signals“ to one of the AV sockets.
  • “Allow switching voltage“ to display the signals of the connected device immediately on the screen via Euro AV during playback.
  • RGB insertions at AV2 to play back RGB signals at all station storage locations.
  • Select decoder stations and set sound encoding.

To make picture subtitles visible, you can use56to move the picture up or down with the picture formats “Panorama“, “Cinema“ and “Zoom“.

(1 only for sets with DVB-S

Delete

Page 20 of the Loewe ConceptL26Basic user manual — END
Page 20 · click to enlarge
Page 20

Operating modes – TV

Under “Settings“ you will find the following functions:

  • Western European
  • Polish
  • Standard.
  • Stations Here you can search for and store new stations automatically or manually. With “Change stations“, you can rearrange and delete the stations and change sta tion names (not for DVB-T stations in GB).
  • Search wizard
  • Manual adjustment
  • Change stations

DVB subtitles

If the station provides DVB subtitles, then you can have the TV display them permanently or suppress their display. You can also select between subtitles “for translation“ or “for the Hearing Impaired“.

Parental lock You can lock the TV “immediatley“, “daily“ for a certain period of time or “agerelated“ for DVB programmes with age restrictions. Here, you determine the PIN to enter if you want to watch locked programmes.

1. Call the “TV menu“ via the MENU button.
2. Select the “Settings“ line and confirm using OK .
  • Timer functions You can have your TV switch off at pre-programmed times or wake you/remind you with radio or TV. If you are not present at the time, a safety prompt makes sure the TV switches off again after 5 minutes.
  • Switch off today only
  • Switch off daily
  • One-time reminder
  • Wake up Mon-Fri
  • Wake up Sat
  • Wake up Sun
  • Wake up with
3. Select the “Miscellaneous“ line and confirm using OK .
4. Select the “DVB subtitles“ line and confirm using OK .

Subtitles off for impaired hearing for translation

END

INFO

  • Wake up signal volume

Language If “your“ menu language is not set, you have to select the “Language“ menu in a language that you do not understand. Therefore here is a simple way to set the right menu language: 1. Press the INFO button (index), select the first listing (this is above A). 2. Call the language selection by pressing the OK button. 3. Now select the desired language and confirm it by pressing the OK key. 4. Hide the menu again with the END button.

By using the END button, you can open the status display and you can display the subtitles again by using the TEXT button.

  • Call the status display by pressing the END button, if it is not yet displayed.
  • When the status display is visible, press the TEXT button. Select the desired language and confirm using OK . The presetting changes for the current programme.
  • Which subtitle languages can be selected depends on the provider.
  • The automatic shortlist is determined by the menu language and the selec tion made in the “DVB subtitles” settings menu.
  • By pressing the END button, you can hide the menu again.
  • Miscellaneous (settings) On-screen displays You can set the duration and position of the station and status display, define the content of the status display and switch the automatic info texts on or off:
  • On-screen display time
  • On-screen display position
  • Programme title
  • Sound mode
  • Time
  • Alarm time
  • Sleep timer
  • Automatic info

Time and date If you receive teletext, the set registers the time and date. These are required for timer recordings, timer functions and EPG. If you do not receive teletext, then you have to enter the date and time; you should not switch off the set using the mains switch since the settings will then be lost.

Update of DVB software via satellite (1.

  • Subtitles off
  • Subtitles for the Hearing Impaired
  • Subtitles as translation for foreign language programmes

(1 only for sets with DVB-S.

Show 4 more labels / short text on this page
DVB character set · DVB subtitles · DVB software · DVB subtitles
Page 21 of the Loewe ConceptL26Basic user manual — Software is recognised automatically
Page 21 · click to enlarge
Page 21

Operating modes – TV

Removing the CA module (Only for sets with CI slot)

Loewe ConceptL26Basic — Operating modes – TV diagram (page 21)
Fig. 27 · Operating modes – TV

Searching for new software

If you want to carry out a manual search for new software, proceed as follows:

1. Switch the TV set off with the mains switch. 2. Remove the cover from the back of the set on the upper left. 3. Press the eject button at the module slot; the CA module is unlocked. 4. Remove the CA module from the set.

Call the TV menu using the MENU button.

Confirm the “Settings” using OK.

Confirm the “Miscellaneous” using OK.

Select “DVB software” and press OK.

Inserting a new CA module

Update digital TV software

Current versionV3.x.x

After you insert a new CA module (CI module (1 is displayed in the menu) and switch the TV set on, the following dialogue is displayed:

You can search for a new software version with OK.

If you start the search using OK, the set checks if there is a new software version available.

Autom. station search

Your TV set has detected a new CI module. This requires a station search for all new receivable stations.

If there is a new version available, the set generates an on-screen message.

After you press the OK button, the system starts the wizard to carry out the automatic station search. Check the proposed search parameters and let the set search for new stations.

Update digital TV software

Current versionV3.x.x
New versionV3.1.0

Calling the CA module menu

Here you can call up information on the inserted Conditional Access module and the Smart Card. To do this, use the MENU button to call the TV menu, select the line “Settings”, “Miscellaneous” and then the entry “CI module - xxx” (in place of “xxx” stands the name of the provider which is output by the Smart Card. The term CI module (1 displayed in the menu refers to the CA module. The content of this menu depends on the particular supplier of the CA module.

Downloading software

If you press OK in the dialogue above, you can decide whether you want to download the new software immediately, when you switch off the set or not at all. We recommend you always carry out the update of the digital software. This is the only way to ensure your set is always up to date.

If you do decide to update, the software is initialised on your set and you are informed of the status with a grey bar. Do not switch your set off during this time. This process may take up to one hour. You will be informed when the process is completed.

Installing new DVB software

To ensure your DVB-S receiver is always performing at the state of the art, newly developed software versions are made available from time to time; these are broadcast via satellite and can be automatically installed on your set (only pos sible via ASTRA1).

After the software is updated, you will be asked to switch your TV set off and back on again using the on/standby switch.

If the update was not carried out, you will be asked several times when you switch on the set whether you want to carry out this update.

Software is recognised automatically

The set can determine whether a new software version is available. This occurs at night when your EPG is automatically updated. For this, your TV set has to re main in the standby mode (do not switch off using the on/off button on the set). If a new software version has been found, the set will indicate this with an on- screen message the next time the set is switched on: You can decide whether or not you want to download the new software. Confirm using OK, so that the new software can be loaded and installed via satellite. Continue as set out in the “Downloading software” section.

(1 CA module has established itself as the usual market name. This cannot be taken into consideration in the menu yet

CI-Slot · CA module

Page 22 of the Loewe ConceptL26Basic user manual — Interchanging PIP picture/TV picture
Page 22 · click to enlarge
Page 22

Operating modes – PIP

Picture in picture (PIP)

Select the station of the TV picture (main picture)

The bar/frame has to be white. If not, press the green col oured key. Then select the station as usual. Note: For GB sets, you switch from the green bar/frame to the white by using the PIP key. The next time you press the PIP key, PIP is switched off.

Picture in picture displays are possible if the set has an analogue PIP tuner or a digital satellite tuner in addition to the analogue TV cable tuner. You can have a PIP tuner or a digital satellite tuner retrofitted. Set-specific equipment and retrofitting options for CI-Slot, PIP and satellite tuners, see pages 41 and 42. If there is no other tuner installed, you can use PIP (AV-PIP) when playing a video recorder or DVD player. For a retrofitted PIP tuner, the following PIP displays are possible: Main picture analogue – PIP picture analogue, Main picture digital – PIP picture analogue. The following is not possible: Main picture digital – PIP picture digital, Main picture analogue – PIP picture digital. For “Split screen,” the PIP picture is displayed on the right side of the screen. Both pictures share the screen in two equal halves. For the “Small PIP” setting, a small picture is displayed in the TV picture. The green bar/frame indicates that the control commands have an effect on the PIP picture. The white bar/frame means that the control commands have an ef fect on the main picture. Use the green coloured key to switch between the PIP picture and the main picture, for example to change stations. The frame or bar between the pictures is green for the time being.

Loewe ConceptL26Basic — Select the station of the TV picture (main picture) diagram (page 22)
Fig. 28 · Select the station of the TV picture (main picture)

41 ZDF Eifellandschaften 21:00 – 21:45

PIP scan in the PIP picture

The bar/frame has to be green. If not, press the green col oured key. Start scanning the stations using the blue coloured key. The bar/frame turns blue.

PIP

PIP picture as freeze picture

The bar/frame has to be green. If not, press the green col oured key. If you press the red coloured key, the PIP picture freezes. Press again - moving picture.

The stations now change automatically. Stop scanning the stations by using the blue coloured key. The bar/frame turns green again.

Interchanging PIP picture/TV picture

Selecting the station of the PIP picture

The bar/frame has to be green. If not, press the green col oured key. Interchange the pictures by using the yellow coloured key.

The bar/frame has to be green. If not, press the green col oured key. Then select the station as usual.

Loewe ConceptL26Basic — Interchanging PIP picture/TV picture diagram (page 22)
Fig. 29 · Interchanging PIP picture/TV picture
Loewe ConceptL26Basic — Interchanging PIP picture/TV picture diagram (page 22)
Fig. 30 · Interchanging PIP picture/TV picture

41 ZDF Eifellandschaften 21:00 – 21:45 1 ARD Der Wilde Westen 21:15 – 22:15

1 ARD Der Wilde Westen 21:15 – 22:15

Show/hide PIP picture

Page 23 of the Loewe ConceptL26Basic user manual — INFO END
Page 23 · click to enlarge
Page 23

Operating modes – PIP

Functions in the PIP menu

Position of the PIP picture

In the PIP menu, you can set the PIP type (small picture or split screen) and the position of the small picture.

Move the PIP picture with the arrow keys to a corner of the TV picture. In this case, the frame around the PIP picture has to be green, and there should not be any other displays visible on the screen.

Call the PIP menu (PIP must be active, green bar/frame).

MENU

Loewe ConceptL26Basic — MENU diagram (page 23)
Fig. 31
Loewe ConceptL26Basic — MENU diagram (page 23)
Fig. 32

TV menu Settings PIP

INFO END

Split screen Sm mall PIP

Setting the PIP type

Switch to split screen:

You can have the PIP picture displayed as a small PIP or split screen.

You can have the PIP picture displayed on the right hand side of the screen. Both pictures share the screen in two equal halves. You will see a coloured verti cal bar between the pictures.

Switch to small PIP:

Select “Type” and then “Small PIP”

MENU

Call the PIP menu (PIP must be active, green frame).

Select “Type” and then “Split Screen”.

TV menu Settings PIP

INFO END

TV menu Settings PIP

INFO END

For the small PIP, you will see a coloured frame around the PIP picture.

Split screen Sm mall PIP

Show 4 more labels / short text on this page
Type · Small PIP Type · Split screen · Type
Page 24 of the Loewe ConceptL26Basic user manual — MENU
Page 24 · click to enlarge
Page 24

Operating modes – EPG

EPG - Programme guide

If programmes are displayed which have not yet started, you can mark these with the OK button. The TV set then switches automatically to this station at the given time. When receiving digital terrestrial and digital satellite stations, you may find that two identical EPG data are displayed in the “EPG (DVB)” menu for one station. If you call the EPG menu in the EPG mode by using the MENU button, then select “Station selection,” you can select the duplicate station and deactivate it by using OK). You have direct access to the selection lines above to pre-select the day, the time, the station and the topic.

EPG is an electronic programme guide. With this system, you can easily find the programmes that interest you (sorted according to day, time, stations and topics). You can mark programmes and programme recordings. Depending on whether you are receiving analogue stations by cable/antenna or digital stations, you will have different programme guides. A wizard is activated the first time you use EPG (not with DVB) which guides you through the necessary settings. Then run the data capture (see next page).

Blue coloured keyCall Select date/time/stations/topics

Using the EPG

Switch EPG on/off EPG

EPG (Electronic Programme Guide) Fri 10.09./14:14 Sat 11.09. Sun 12.09. Mon 13.09. 06:00 all all

EPG (Electronic Programme Guide) Fri 10.09./14:14 Fri 10.09. now soon 14:00 15:00 16:00 17:0 all all

06:00-06:20 ZDF Die Blobs 06:00-06:30 RTL Wunderbare Jahre 06:00-06:25 Kabel 1 Dennis 06:00-06:25 N3 Extra en español (5) 06:00-06:30 BR Goal. Speak English, Play Football 06:00-06:30 WDR Lokalzeit Südwestfalen 06:00-07:10 SuperRTL Infomercials 06:00-07:10 Kinderkan Reif für die Dodo-Insel (25) 14:00-14:20 9LIVE Reisetraum Comedyserie - Kandidaten mit gewissen Fehlern

13:20-14:15 Kabel 1 Die Waltons 13:30-14:15 H3 ARD-Buffet 13:55-14:20 Kinderkan Blaubär & Blöd (37) 14:00-14:15 ZDF heute - in Deutschland 14:00-15:00 RTL Das Strafgericht 14:00-15:00 Sat 1 Zwei bei Kallwass 14:00-15:00 Pro7 Das Geständnis - Heute s... 14:00-14:30 N3 DAS! ab 2 14:00-14:20 WDR Die kleinen Strolche (10) Familienserie - Sturzflug

END Change to programme list

MENU

Detail View Record Page / Select time Select date, ... , topics

TEXT

P+ P–

END OK

Use 65 to select the menu line for the date, time, stations or topics. Use 34 to select within the menu line. If, for example, you are looking for the next news, select today’s date, “Soon“ under Time, “All“ under Stations and “News“ under Topics. Then you get a list of all news programmes in the programme list below.

0 9 ...

MENU

The programme guide menu is divided into two areas: at the top, you can make the settings for the programme list (date, ..., topics); on the bottom, the programme list is displayed. Use the blue coloured key to switch between the two areas to make your selections. All programmes currently running are listed initially in the programme list. With the 65 buttons, select the programme you want to watch and switch over with the OK button. Brief information is shown below the programme list for some programmes. If more detailed information is available, you can call it using the TEXT button. Use P+/P– to scroll up or down through the pages of the programme guide. In the selection lines for date and time above, you will see the time change when scrolling; when you scroll further, the date also changes. When the “Time” line is selected, you can enter the time as of which the pro grammes are to be displayed; use the numeric buttons on your remote control to do this. Always enter four digits, such as 0900 for 9 a.m.

EPG (Electronic Programme Guide) Fri 10.09./14:14 Fri 10.09. soon all News Show Hobby Sport Child Kn

15:00-15:15 Das Erste Tagesschau um drei 15:00-15:05 hr-fernse hessen aktuell 15:00-15:15 ZDF heute - Sport 16:00-16:05 SÜDWEST Baden-Württemberg Aktuell 16:00-16:15 Das Erste Tagesschau um vier Nachrichten - News

END Change to programme list

MENU

If you want to mark one of these news programmes, return to the programme list using the blue coloured key, select the desired news programme by using 65and mark this by using OK.

Show 9 more labels / short text on this page
Date Time Stations · Date Time Stations · Topics · Topics · 24 Kabel 1 · 24 Kabel 1 · Date Time Stations · Topics · 24 Kabel 1
Page 25 of the Loewe ConceptL26Basic user manual — Switch on TV when marked
Page 25 · click to enlarge
Page 25

Operating modes – EPG

In front of the programme’s title, the system places an ✓ . This station is switched later to this programme when the set is switched on. If the TV is off, it switches on again automatically at the beginning of the marked programme if this has been set in the EPG menu. If you are out, a security prompt prevents the TV set staying on unattended. Before leaving the upper selection lines using the blue coloured key, select a specific line. If you have switched back to the programme list, you can change this menu line using 34 without having to leave the programme list.

If you want certain stations to be omitted from the programme guide, you can select and deactivate these via Station selection. Call the station selection by using the blue coloured key.

First, all stations are marked with the ✓ symbol so that their data is displayed in the programme guide (precondition: provided EPG data is broadcast for the respective station). Stations indicated by E are analogue terrestrial/cable sta tions, stations indicated by T are DVB-T stations, stations indicated by C are DVB-C stations and stations indicated by S are DVB-S stations. These stations are available for evaluation in the programme guide.

Programming recording for recorders

Select the stations you want to omit from the programme guide one after another and deactivate each one by using OK. The ✓ symbol is removed.

The programme marked using the 65 buttons can be prepared for recording by pressing the red coloured key. In the following menu, confirm the timer data or change them as required. Then, a red dot is set in front of this programme in the EPG programme list as an identification (if timer data is being transferred to the recorder, no red dot is set). If you select this programme, you can delete it from the timer using the red coloured key (if the timer data has been transferred to a recorder, the timer has to be deleted there).

Data capture

After these settings or after each time the set is switched off using the mains switch, the data must first be collected, before switching on the set. To do this, select the station you have defined as a provider and leave the TV set switched on for about one hour or switch the set to the standby mode. After about two minutes in standby mode, the indicator on the set turns orange. The data acquisition begins and lasts about 1 hour. When data acquisition is termi nated, the indicator turns red again. The data are also automatically captured between 2 a.m. and 5 a.m. when the TV is switched to standby. A prerequisite for data capture is that “Data capture“ is “on“ (for DVB + ana logue) in the EPG menu.

EPG menu

Call EPG menu MENU

INFO END

Switc Data capture Station select Timer list EPG menu Select provider OK

  • You will find the following settings in the EPG menu:
  • Select provider
  • Station selection
  • Timer list
  • Data capture
  • Switch on TV when marked

Selecting providers and stations

If you want to change the provider for analogue TV reception (the station which transmits EPG data) to have other stations evaluated, you can do this under “Select provider”.

Switch on TV when marked

You can have the TV switched on automatically from standby at the beginning of the marked programme. If you are not present at the time, a safety prompt makes sure the TV switches off again after 5 minutes.

Select “Select provider” and call this menu using OK. If the station you want to switch to is not listed in the “Select provider” list, then use the yellow coloured key to start the automatic search for stations with EPG data. This takes a while.

Or, if you know the station that transmits EPG data, press the blue coloured key to compile manually. Select the provider in the station list and adopt it by using OK and return to the provider selection using 7.

Select the provider in “Select provider” and adopt it using OK. Then a station list search is performed. The stations offered by the provider are displayed in a list.

Page 26 of the Loewe ConceptL26Basic user manual — PIP
Page 26 · click to enlarge
Page 26
Loewe ConceptL26Basic — Operating modes – PIP diagram (page 26)
Fig. 33 · Operating modes – PIP

Operating modes – Teletext

Analogue Teletext

In Multiple pages scroll using 34. You can see which multiples pages can be called in the bottom menu line.

Teletext transmits information such as news, weather, sports, programme previews and subtitles.

Zeitplan Fußball 1 2 3 4 5 6 7 8 9 10 11 12 – +

INFO TEXT

Call contents page 100

100 100 ARD-Text 10.09.04 14:14:42

ARD TEXT Teletext im Ersten

Call the TOP table The TOP table is a general list of teletext. You can only call the table for stations that use the TOP operating system.

Bulmahn: Bildung statt Eigenheim 120 Wird auch der Nahverkehr teurer? 121 Australien: Keine Zugeständnisse 122 Tote bei Zugunglück in Schweden 532

Bulmahn: Bildung statt Eigenheim 120 Wird auch der Nahverkehr teurer? 121 Australien: Keine Zugeständnisse 122 Tote bei Zugunglück in Schweden 532

Tennis: Haas unterliegt Hewitt 204 Formel 1: Schumacher erneut vorne 213

Tagesschau . . 110/112 Kultur 500 Wetter 170 Gesellschaft . . . 530 Sport 200/600 Lotto/Toto . . 666 TV Guide . . . 300/400 Wirtschaft 700 Internet: www.ard-text.de – + Inhalt tagesschau Page selection

Übersicht tagesschau Wetter Sport 1 TV Guide ARD heute ARD morgen FS-Sendungen TV Guide 2 more . . .

Wetter Vorhersage Städte Regional Reisen int. Städte Biowetter

Tennis: Haas unterliegt Hewitt 204 Formel 1: Schumacher erneut vorne 213

Tagesschau . . 110/112 Kultur 500 Wetter 170 Gesellschaft . . . 530 Sport 200/600 Lotto/Toto . . 666 TV Guide . . . 300/400 Wirtschaft 700 Internet: www.ard-text.de – + Inhalt tagesschau Seitenauswahl

END

Many stations use the TOP operating system, some use FLOF (e.g. CNN). Your TV supports both these systems. The pages are divided into topic groups and topics. After switching on the teletext, up to 1,500 pages, depending on type of set are stored for fast access (see technical data on page 40).

Use 65 to select the topic group. Select the topic column using 4. Select the topic with 65 and display page with OK.

Page selection with the coloured keys

The coloured bars (in TOP) or the coloured writing (in FLOF) in the next to the last line show you which coloured keys you can use to scroll to topic groups and topics.

Enter the page number directly

Displaying teletext pages

Redback to the previously seen page (not in FLOF)

AV

Stop self-turning pages (HOLD)

Greenon to the next page (not in FLOF)
Zoom pagetop part - bottom part - normal size (press button several times)
Yellowto the next topic (only in TOP and FLOF)

TV picture on/off (Split Text)

Blueto the next topic group (only in TOP and FLOF)
Loewe ConceptL26Basic — AV diagram (page 26)
Fig. 34

PIP

100 100 ARD-Text 10.09.04 14:14:42

ARD TEXT Teletext im Ersten

Select one page number specified on the page by using 65(Page Catching)

Bulmahn: Bildung statt Eigenheim 120 Wird auch der Nahverkehr teurer? 121 Australien: Keine Zugeständnisse 122 Tote bei Zugunglück in Schweden 532

Formel 1Schumacher erneut vorne . . . . . . . 213

Tennis: Haas unterliegt Hewitt 204 Formel 1: Schumacher erneut vorne 213

Tagesschau . . 110/112 Kultur 500 Wetter 170 Gesellschaft . . . 530 Sport 200/600 Lotto/Toto . . 666 TV Guide . . . 300/400 Wirtschaft 700 Internet: www.ard-text.de – + Inhalt tagesschau Page selection OK View

Tagesschau . . 110/112 Kultur 500 Wetter 170 Gesellschaft . . . 530 Sport 200/600 Lotto/Toto 666 TV Guide 300/400 Wirtschaft 700 Internet: www.ard-text.de – + Inhalt tagesschau Page selection

call.

Show 7 more labels / short text on this page
Teletext on/off · Index > 101 · TOP table · View OK · abc pqrs · wxyz · Index > 101
Page 27 of the Loewe ConceptL26Basic user manual — END INFO
Page 27 · click to enlarge
Page 27

Operating modes – Teletext

Programme timer recordings

Digital teletext operation (only for MHEG-5 device versions)

A video and/or DVD recorder must be connected and logged in in the connec tion wizard. Call the programme pages of the current station in teletext mode using the Direct recording button . Scroll to the teletext page in which the programme to be recorded is listed if necessary. Select the programme you want to record by with 65 and confirm with the OK button. For “Timer data,” select the VCR or DVD recorder and whether you want to record once or a series of times. Confirm with OK.

In the GB, the teletext for DVB-T stations is transmitted as per the MHEG-5 standard (standard of the Multimedia and Hypermedia Expert Group). It con tains text, graphics, functions and links. The operation of these menus depends on the particular provider. Normally after a station is changed, the provider broadcasting the digital teletext makes an introductory offer for this service on the screen via menu selection. Follow these notes. If no message appears telling you how to switch to digital teletext after switch ing to another station, press the TEXT key. If a selection for DVB subtitles is available, this item must be hidden before.

Teletext menu

Display teletext menu MENU

Loewe ConceptL26Basic — Teletext menu diagram (page 27)
Fig. 35 · Teletext menu

100 100 ARD-Text 10.09.04 14:14:42

ARD TEXT Teletext im Ersten

Bulmahn: Bildung statt Eigenheim 120 Wird auch der Nahverkehr teurer? 121 Australien: Keine Zugeständnisse 122 Tote bei Zugunglück in Schweden 532 Tennis: Haas unterliegt Hewitt 204 Formel 1: Schumacher erneut vorne 213

Tagesschau . . 110/112 Kultur 500 Wetter 170 Gesellschaft . . . 530 Sport 200/600 Lotto/Toto . . 666 TV Guide . . . 300/400 Wirtschaft 700 Internet: www.ard-text.de

END INFO

Reveal cording Re Settings Newsflash Personal text pages ...

  • Here you will find functions such as
  • “Newsflash”, this is an on-screen display of the latest messages (e.g. page 111).
  • “Reveal” concealed information, e.g. VPS pages in the station preview pages.
  • Programme wizard for recording via teletext.

Depending on the provider’s respective offer, you can use the 6534 buttons and the OK button, the coloured keys, the END/TEXT button and sometimes even the numeric buttons. If you want to close the digital teletext, just select a different station using the P+/P– buttons or follow the menu prompts on the screen.

In the settings, you will find menus to define the station preview pages, subtitle pages and personal text pages, and menus to set the character set selection as well as HiText graphics.

Digital teletext is not available when DVB-subtitles are being displayed. If a timer recording is programmed at the TV-set, at the start time of the recording the digital teletext mode is switched off automatically.

Show 4 more labels / short text on this page
Index > 101 · Menu · Inhalt tagesschau · • •
Page 28 of the Loewe ConceptL26Basic user manual — END
Page 28 · click to enlarge
Page 28

Operating modes – Radio

Radio

Radio menu

MENU

You can only receive radio stations via DVB. If you do not have any DVB radio reception, you can play a sound signal from an external device using the TV set via the sound/AV inputs.

Timer functions Stations Radio menu Sound

INFO END

Treble ...

Use the RADIO button on the remote control to switch the radio on or off.

RADIO

In the radio menu, as in TV mode, you can set the sound, search for radio stations and store them (automatically or manually – not with DVB-T mode in GB), delete stations from the list, rearrange them or change names and set the switching off and alarm functions.

Radio8 DLF Numerical

AUDIO IN AVS AV2 AV1 1 B5 AKTL S 2 BAYERN 1 S 3 BR4 KLSK S 4 SUNSHINE S 5 ROCK ANT S 6 ANTENNE S 7 DLR S 8 DLF S

9 HR-INFO S 10 MDR INFO S 11 MDR FIGA S 12 NDR KULT S 13 SWR1 S 14 SWR2 S 15 WDR3 S 16 WDR5 S 17 OESTER 1 S 18 MDR JUMP S 19 JAZZ RAD S 20 BLUSAT20 S

EPG - Programme guide

For the DVB radio stations, you can also use the programme guide if the station currently active supplies data.

18:00 - 18:10 Nachrichten

EPG

OK Switch to ... Scan stations Select station Previous station Screen off/on Change sorting

0 9 ...

END

MENU

EPG

You can see a station list of the radio stations or with DVB-T in GB the station logo. In this case you can call up the station list by using the OK or INFO key. Station list is sorted by LCN.

You can see a station list of the radio stations. Digital DVB-T stations are indicated by T , DVB-C stations by C and DVB-S stations by S . Encrypted stations are additionally indicated by . Ask your specialist dealer about decoders or the use of a CA module and a Smart Card for the reception of encrypted stations.

When time and title are sent by the marked station these data are displayed at the bottom of the station list.

When the station list is shown you can switch off the screen with the red coloured key. The LED indicator on the set changes from green to orange. You can switch the screen display back on by using the OK key, red or blue coloured keys, by using RADIO, MENU or END on the remote control.

Station switching with dark screen: by using – or + on the TV set or by using the remote control P– and P+ or by using the numeric buttons (for DVB-T operation in GB, the buttons may be configured differently by the provider).

The sound menu can be called in the radio mode using the button.

Call radio menu · Call Programme guide

Page 29 of the Loewe ConceptL26Basic user manual — Connecting video/DVD recorders
Page 29 · click to enlarge
Page 29

Operating additional equipment

Login and connect equipment

Search for and store the station of the video recorder (if no Euro-AV cable is available) Switch on the test station on the VCR or insert a recorded tape and start play back. In some video recorders the station must be switched on by activating the modulator.

You have logged in and connected all connected equipment in the initial instal lation. If you want to connect other equipment or disconnect equipment, call the connection wizard.

Call up the TV menu

MENU

Then call the AV selection on the TV set with 0 AV. Select the menu item “VIDEO” in the AV selection and call using OK. To prevent “normal” TV stations being found in the search, pull out the antenna plug from the antenna input of the VCR temporarily (the cable to the antenna system). If you cannot see the test station or playback from the cassette, the VCR is transmitting on a different channel. You then have to search for the station or set it manually.

Select the submenu line

Select “New devices/modifications” and ...

Call with OK.

1. Call the TV menu with the MENU button. 2. Select the “Settings” menu item with 34. 3. Select the line below using 6 and use 34 to select “Stations”. 4. Select the line below using 6and select “Manual adjustment” using 34 and call this menu using OK. 5. Enter channel “E30“ under the “Channel“ menu item (“Antenna/cable (analogue)”, select in this menu above if necessary). 6. Start search with the blue coloured key. 7. When the station has been found, change the name if needed, confirm with OK and save with the red coloured key. 8. A list of the stored stations is displayed. 9. Select 0 (VIDEO) here and overwrite this station storage location using the red coloured key. 10. Hide the menu again using the END button.

State what equipment you want to connect. State whether a piece of audio equipment is to be connected (more details as of page 31). The connection wiz ard then shows you which sockets you should connect this equipment to. Then connect the equipment to these sockets according to the connection diagram.

Connecting video/DVD recorders

In addition to the connection via the Euro-AV sockets, you also have to connect the antenna (only for terrestrial antenna or cable systems) through the VCR/DVD recorder to the TV set. The antenna signal is then available to the video/DVD recorder and the TV set. Note: Use Euro-AV cables with right-angled plugs as shown.

Loewe ConceptL26Basic — Connecting video/DVD recorders diagram (page 29)
Fig. 36 · Connecting video/DVD recorders

Plug the antenna plug back in.

If you now get interference because a TV station is transmitting on the same channel as the VCR station, you have to change the transmitting station on the VCR and search for the VCR station on the TV again.

Select “Connections”

Page 30 of the Loewe ConceptL26Basic user manual — Calling AV input via the station list
Page 30 · click to enlarge
Page 30

Operating additional equipment

Video playback

Timer recording with video or DVD recorder

There are several ways to see the picture and hear the sound of the VCR, DVD player/recorder or camcorder on your TV:

You can programme timer recordings on the TV set. Programming can be done with the EPG programme guide (not with DVB-T in GB), teletext or manually. Call the “Timer list” menu with the button and press the red coloured key for the “Recording wizard”. Select whether you want to programme the recording via EPG, teletext or manually. You also have the option to programme recordings directly from the EPG programme guide or teletext. Note: Copy-protected programmes are not output to the Euro-AV sockets for legal reasons. When you have connected the Euro-AV socket to a recorder which has Digital Link Plus or a comparable system from a different manufacturer, the timer data of analogue terrestrial stations are transmitted from the TV to the recorder. The recording quality SQ or EQ is transmitted for DVD recorders, in additional to the station, date and time. The recording is then controlled by the recorder and the recorder tuner is used for reception of the station. The recording data are not saved in the timer list of the TV set. You will only find the timer data in the recorder.

1. You can usually use the Euro-AV sockets on the TV set and on the VCR. For camcorders or digital cameras, use the AVS sockets on the TV set. DVD play ers/recorders and SetTopBoxes may have HDMI or component sockets for video and audio transmission. In this case, use the corresponding sockets on the TV set. When playing back from a video recorder using Euro-AV socket and Digital Link Plus (or a comparable system from another manufacturer), the picture from the VCR is shown at the current channel location. When playing back from another VCR, camcorder or digital camera, use the AV selection AV or the station list (OK) to select the AV socket/the device to which the VCR is connected. Video recorders transmit a switching voltage during playback, which the TV can evaluate (can be activated in the connection wizard or in the “TV menu – Connections – Miscellaneous – Allow switching voltage” - set to “yes”). Then the picture of the video recorder is shown during playback at the current station location. 2. You can use the antenna connection between the VCR and the TV without a Euro-AV socket. The sound is only transmitted in mono. Select the first menu item, e.g. VIDEO, in the AV selection.

If you want to record from digital stations, the TV tuner is used and the recorder is controlled by the TV set. Then the station is locked during the timer recording.

If you have connected a Loewe video recorder with Digital Link to the Euro-AV socket (without Digital Link Plus) and you are using the timer programming of the TV, the TV receiver is always used, for terrestrial stations as well. The TV controls the recording. You have to set the recorder to the AV input (signal source) to which the TV set is connected. Then the station on the TV set is locked during the timer recording. Digital Link must be switched on on the recorder. Read the operating instructions of your Loewe recorder for more information. Use only Euro-AV cables, which are completely wired, otherwise Digital Link/ Digital Link Plus will not work. Another advantage of Digital Link is that you can install the recorder in a con cealed place (e.g. in a rack). You can control the recorder with the TV set. If you have a Loewe recorder with both systems, you can use all the advantages. The advantages of Digital Link Plus are used for the timer recording; the advan tages of Digital Link for concealed installation of the recorder.

Calling AV inputs in the AV selection:

AV

AV selection VCR OK

HDMI/DVI COMP. IN AVS VGA DVD VIDEO

Select AV device/socket (or VIDEO if the video recorder has been connected only via the antenna socket) and use ...

to call.

Now you will see the playback from the connected AV device.

Calling AV input via the station list

Call the station list with the OK button in TV mode. In the numeric and alphabetical sorting, you will always find the AV sockets at the top of the list.

Call AV selection

Page 31 of the Loewe ConceptL26Basic user manual — Audio input “AUDIO DIGITAL IN”
Page 31 · click to enlarge
Page 31

Operating additional equipment

Assignment of digital audio inputs and outputs

Audio output “AUDIO DIGITAL OUT“

The digital audio signal is applied at the “AUDIO DIGITAL OUT” socket of the TV. For example, you can connect an external digital audio amplifier or the Loewe Auro system here.

Audio input “AUDIO DIGITAL IN”

An analogue audio signal from the TV set or another sound source which is received at one of the Euro-AV sockets of the TV set is converted into a digital signal (PCM) and output at the “AUDIO DIGITAL OUT“ socket. Conversion from external analogue AV sources to PCM is not possible if the TV’s loudspeakers are used as a centre channel. In this case, connect your audio amplifier additionally to the TV (AUDIO OUT L/R) with a cinch cable and switch the audio amplifier to analogue audio input. The digital TV sound or the digital sound of a connected auxiliary device is only audible via an external digital audio amplifier (e.g. Loewe Auro system).

The TV set has a coaxial digital audio input “AUDIO DIGITAL IN” and a coaxial digital audio output “AUDIO DIGITAL OUT”. If you are using an external digital surround amplifier for sound reproduction, you have to feed digital audio signals to the TV, e.g. from the DVD player.

Loewe ConceptL26Basic — Audio input “AUDIO DIGITAL IN” diagram (page 31)
Fig. 37 · Audio input “AUDIO DIGITAL IN”

Connect the output socket of the DVD player (DIG OUT) to the TV‘s “AUDIO DIGITAL IN” socket with a cinch cable. In the connection wizard, specify that audio transmission is to be digital. Specify that the digital sound is to be assigned for example to the Euro-AV socket 2 to feed the digital sound to the digital audio output of the TV set and via this to the external audio amplifier. Further information about this can be found on page 33.

Page 32 of the Loewe ConceptL26Basic user manual — Operating additional equipment
Page 32 · click to enlarge
Page 32

Operating additional equipment

Connecting Loewe DVD Preceiver Auro 2216 PS and Individual Sound loudspeaker system

Connect the digital audio output of the TV set “AUDIO DIGITAL OUT” to the “DIGITAL IN” input of the Preceiver using a cinch cable. Connect the TV socket “SERVICE“ to the TV-L-Link socket on the Preceiver using the L-Link cable (pro vided with the Preceiver). Switch on the TV set and the Preceiver. Via the L-Link, the TV recognises whether the Preceiver is connected. Select the “Tremo“ loudspeaker system in the DVD menu of the Preceiver, set the listener/speaker distances and adjust the speaker levels. Please consult the Preceiver manual. If you want to listen to the sound via the TV speakers temporarily, call the Sound menu, select “Sound via“ and then “TV“. If you want to listen to the sound via the Loewe Auro system, select “AURO“ under “Sound via“.

You can play audio signals from the TV or DVD player in cinema quality with these components. In addition to the subwoofer illustrated below the Individual Sound system includes up to 5 loudspeakers for the front, center and surround reproduc tion. The centre signal can be reproduced alternatively by the TV speakers. Connect the cubic socket on the DVD Preceiver to the “Master” cubic socket on the subwoofer. Use the cubic plug cable enclosed with the DVD Preceiver. Plug the white plug (without kink protection) into the cubic socket on the subwoofer. For TV as a centre loudspeaker, connect “AUDIO IN C” on the TV set to “PRE OUT C”on the DVD Preceiver using a cinch cable.

Loewe ConceptL26Basic — Operating additional equipment diagram (page 32)
Fig. 38 · Operating additional equipment

Audio cable cinch -> SCART (available in specialised trade)

Page 33 of the Loewe ConceptL26Basic user manual — Operating additional equipment
Page 33 · click to enlarge
Page 33

Operating additional equipment

Connecting other audio amplifiers or active speakers

Select “Analogue“ for “Sound transmission“ for analogue audio amplifiers. The sound for the analogue amplifier is transmitted via the AUDIO OUT L/R con nections of the TV to the audio amplifier. Connect the amplifier with two cinch cables. Specify under “Type of amplifier“ whether the analogue amplifier is a stereo or surround amplifier. If it is a surround amplifier, also specify whether or not the TV speakers are to be used as centre loudspeakers. Connect the centre output of the amplifier to the centre output of the TV using a cinch cable, if necessary. Note: do not use the centre loudspeaker connection on the amplifier; instead use the pre-amplifier centre output.

In the connection wizard, select “HiFi/AV amplifier” under “Equipment selec tion: audio component”. The connection wizard allows configuration of different audio amplifiers (stereo amplifiers, surround amplifiers, analogue or digital) with different sound formats (Dolby Digital, dts, MPEG and Stereo/PCM). Refer to the operating instructions for the audio amplifier to be connected.

Select “Digital“ under “Audio transmission“ for digital audio amplifiers. Con nect the digital audio output of the TV AUDIO DIGITAL OUT to the digital audio input of the digital amplifier.

Assign the digital audio input to the socket through which the corresponding picture is transmitted (e.g. AV2 if a DVD player is connected there). Then the digital sound is passed to the digital audio output of the TV set and fed to the external audio amplifier via this.

Loewe ConceptL26Basic — Operating additional equipment diagram (page 33)
Fig. 39 · Operating additional equipment

Specify which sound formats can be decoded with your digital amplifier (Dolby Digital, MPEG, dts).

Specify under “Type of amplifier“ whether the digital amplifier is a stereo or surround amplifier.

If it is a surround amplifier, specify whether or not the TV loudspeakers are to be used as centre loudspeakers. Connect the centre output of the amplifier to the centre output of the TV using a cinch cable, if necessary. Note: do not use the centre loudspeaker connection on the amplifier; instead use the pre-amplifier centre output.

Loewe ConceptL26Basic — Operating additional equipment diagram (page 33)
Fig. 40 · Operating additional equipment

If you want to listen to the sound via the TV loudspeakers temporarily, call the Sound menu using the button, select “Sound via“ and then “TV“.

When connecting active speakers, select “Active speakers” in the connection wizard under “Audio equipment selection”. The sound for the active speakers is transmitted via the AUDIO OUT L/R connections to the active speakers. Make connections to the active speakers using the cinch cables.

Make the audio settings on the TV set when active speakers are connected. When using an external audio amplifier, make the audio settings on the audio amplifier.

Page 34 of the Loewe ConceptL26Basic user manual — Setting colour standard
Page 34 · click to enlarge
Page 34

Operating additional equipment

HDMI (DVI) connection

VGA/XGA connection

The HDMI connection (High Definition Multimedia Interface) allows digital picture and sound transmission via a connecting cable, e.g. from Loewe DVD Recorder Centros 2102/2172 HD. The digital picture and sound data are transmitted without data compression and therefore lose none of their quality. In the equipment con nected, no analogue/digital conversion is necessary, which might also have lead to losses in quality. DVI signals can be also be reproduced by the HDMI connection using a DVI/HDMI adapter cable. This is possible because HDMI is based on DVI and is downwardly compatible. That means that the digital video signals are transmit ted via HDMI - no audio signals are transmitted, though. In addition, both use the same copy protection method HDCP.

You can connect a PC or a Set Top Box (STB) and therefore use the TV screen as an output device. Connect the PC/STB to the VGA/XGA socket on the TV using a VGA cable. When connecting to a PC, first set one of the following screen resolutions on your PC. 800x600 60Hz (SVGA) 1024x768 60Hz (XGA). When a Set Top Box is connected, set the following screen resolutions according to the options of the Set Top Box: SDTV: 720x576i (PAL), 720x480i (NTSC), 720x576p, 720x480p. HDTV: 1280x720p, 1920x1080i.

Connect the set with an HDMI connection using an HDMI cable (type A, 19-pin) to the HDMI socket of the TV set. Log in the HDMI connection in the connec tion wizard (TV menu - Connections - New devices/modifications).

Select the VGA/XGA connection in the AV selection.

Call AV selection AV

VIDEO COMP. IN VGA DVD AVS HDMI/DVI AV selection

Select the HDMI connection in the AV selection.

VCR OK

Call AV selection AV

Select VGA socket and use ... OK

VIDEO COMP. IN AVS VGA DVD HDMI/DVI AV selection

to call. OK

VCR OK

Select HDMI/DVI socket and use ... OK

Start the connected device.

to call. OK

Set geometry

Call the TV menu using the MENU button, select “Geometry“ using 34 and set: If the picture is not positioned correctly, you can move the picture horizontally and vertically here so that it fills the whole screen. You can also set the phase position so that the picture appears in the best possible quality.

Start playback on the device connected with HDMI connection. The set automatically recognises and sets the best possible format for the video. If transmission occurs via a DVI/HDMI adapter cable, then you can feed in the appropriate analogue audio via the audio input sockets AUDIO IN L/R on the TV set. The sound is reproduced via the TV speakers. If you have connected a digital external audio amplifier, you can select the digital audio signal in the connection wizard (TV menu - Connections - New devices/modifications) and assign it to the HDMI/DVI socket. You can make the other settings for the audio amplifier as described for digital amplifiers on page 33. The digital audio signal of the DVI audio source is fed in at the AUDIO DIGITAL IN socket on the TV. Feed the digital audio signal from the TV AUDIO DIGITAL OUT to the external amplifier.

Setting colour standard

Call the Picture menu using the button. Select “Colour standard“ using 34 and make your selection. The colour standard for a connected PC is RGB. In Set Top Boxes, you usually set Ycc as a colour standard. Other formats such as Ypp or RGB can also be output. Please consult the operating instructions of the device connected. If the wrong standard is selected, you will recognise this by the wrong colours in the display.

Set geometry: as described for the VGA/XGA connection.

Page 35 of the Loewe ConceptL26Basic user manual — VCR OK
Page 35 · click to enlarge
Page 35

Operating additional equipment

Sound from PC or Set Top Box

Component video connection

Feed the analogue audio signal from the PC or the STB to the sockets AUDIO IN L/R on the TV via a cinch cable. The sound is reproduced via the TV speakers. If you have connected a digital external audio amplifier, you can select the digital audio signal in the connection wizard (TV menu - Connections - New devices/modifications) and assign it to the VGA/XGA socket. You can make the other settings for the audio amplifier as described for digital amplifiers on page 33. The digital audio signal of the Set Top Box is fed in at the AUDIO DIGITAL IN socket on the TV. Feed the digital audio signal from the TV AUDIO DIGITAL OUT to the amplifier.

If you have a DVD player/recorder with Component OUT connec tions, you can connect it to the SD/HD-COMPONENT IN sockets of the TV instead of to the Euro-AV sockets. The connecting cable with three cinch plugs each transmits picture information. The playback is of a better quality than via the Euro-AV socket. You need another cinch cable for the analogue sound transmission. Connect the analogue audio outputs of the DVD player to the AUDIO IN L/R sockets on the TV set. The sound is reproduced via the TV speakers. If you want to use the digital sound of the DVD player with a digital audio amplifier connected to the TV, make a connection between AUDIO DIG OUT of the DVD player and AUDIO DIGITAL IN of the TV set. Log in the component/device in the connection wizard: Assign the AUDIO DIG IN input here to the COMP. IN socket, provided a digital audio amplifier is also connected. You can make the other settings for the audio amplifier as described for digital amplifiers on page 33. Set the signal at the component input in the connection wizard: Set to “Auto matic“ first. If the signal is not reproduced when playback is started, consult the operating instructions of the DVD device connected to find out what screen resolution is possible (SDTV, HDTV or ProScan).

Select the component connection in the AV selection.

Call AV selection AV

VIDEO COMP. IN AVS VGA DVD DMI/DVI HDMI/DV AV selection

VCR OK

Select COMP. IN sockets and use ... OK

to call. OK

Start playback on the connected device.

Set geometry and colour standard: as described for the VGA/XGA connection.

Page 36 of the Loewe ConceptL26Basic user manual — V+
Page 36 · click to enlarge
Page 36

Operating additional equipment

Operating Loewe video recorders and Loewe DVD players directly

When operating in the VCR or DVD mode, the indicator above the VCR or DVD button lights up. In DVD mode, the following DVD players can be operated: Xemix 6122DO, 8122DA and 6222PS.

You can switch over the remote control of the TV set to operate Loewe video recorders and Loewe DVD players. These devices can be operated directly. Select the device to be operated:

In VCR mode, the following VCRs can be operated: ViewVision 8106H, 8136H, 8176H, 6306H, 6336H, 6376H, 6396H, 4306H, 4376H, 2102M, 2302M, 4206, 4236, 4276.

press the VCR button, the indicator above lights for about 5 seconds. press the DVD button, the indicator above lights for about 5 seconds. Switch back to TV operation: Push the TV button.

For other Loewe equipment than that listed, please use the original remote control.

VCR

DVD

TV

Functions for Loewe DVD players (Xemix 6122DO, 8122DA, 6222PS) Functions for Loewe video recorders (VV 8106, 8136, 8176)

Loewe ConceptL26Basic — VCR diagram (page 36)
Fig. 41
Loewe ConceptL26Basic — VCR diagram (page 36)
Fig. 42

Switch DVD on / off on standby

Switch recorder on/off – in standby

Operating the TV set

TV DVD VCR

Operating the TV set

TV DVD VCR

Select picture and sound source

T-C

T-C

Select video and audio input

Display/close ShowView timer Menu

DISC-MENU

Set time display to 0:00:00

DISC-MENU

RADIO SV

RADIO

Switch to Long Play

SP/LP 000

SV SP/LP 000

Select station directly /in menuenter digits
Select Chapter; in menuenter digits

Call AV selection (TV)

EPG AV PIP

Set picture format (TV)

Call AV selection (TV)

EPG

AV PIP

Set picture format (TV)

Status display on/off in the menu: Close menu

Status display on; in menuclose menu
VCR menu on /in menuback

MENU

END

in menuback

MENU

END

TEXT

INFO

TEXT

INFO

DVD menu on, previous function activ; in menu: info on/off

Loewe ConceptL26Basic — MENU diagram (page 36)
Fig. 43
Loewe ConceptL26Basic — MENU diagram (page 36)
Fig. 44
Loewe ConceptL26Basic — MENU diagram (page 36)
Fig. 45

P+

Reverse play /in menuselect/set

P–

P+

P–

P+

on playbackSlow motion forward /in the menu: select/set or to the next menu
Title/Chapter Table; in menucall/confirm

Call up station list /in menu: call up/confirm

V– V+

/Chapter up/down in menu: select up/down / Search back/forward in menu: select left/right
/ at stopProgram up/down on playback: manual tracking in the menu: Select position

V+

V+

P–

Fast forward /search forwards Start playback

Next chapter /search forward

Beginning of chapter or

Pause /single frame, slow motion

Pause (still frame) /frame-by-frame advance

Show 35 more labels / short text on this page
Sound off/on (mute) · Sound off/on (mute) · Operating VCRs · Operating VCRs · Operating DVD players · Operating DVD players · Select chapter · Display/close Timer list · Set marker · Repeat · Select camera position · Zoom · User interface of · /Standard Play · loaded DVD on · abc def · abc def · ghi jkl mno · ghi · jkl mno · pqrs · tuv wxyz · pqrs · tuv wxyz · DVD menu on; · Status display on/off · V–/V+ volume quieter/louder · V–/V+ volume quieter/louder · Rewind /search backwards · previous chapter · Playback · /search back · Start recording · Stop tape · Stop
Page 37 of the Loewe ConceptL26Basic user manual — Problem Possible cause Remedy
Page 37 · click to enlarge
Page 37

What to do, if ...

Problem Possible cause Remedy

The “Recording” menu point is not displayed in the TV menu.

No video or DVD recorder logged in. Log in the video or DVD recorder in the connection wizard and connect the device.

“Connections” cannot be called in the TV menu (deactivated).

A time recording is in progress. Wait until the timer recording has ended or delete the timer.

The control of the Loewe video recorder and the timer do not work or do not work properly.

a) The Digital Link function is not activated or not

a) Activate Digital Link in the recorder (see operating

possible in the recorder.

instructions of the video recorder).

b) Euro-AV cable is not connected.

b) Connect the Euro-AV cable.

c) Recorder is not logged in.

c) Log in recorder.

General problems with connecting external equip ment via an AV input.

a) The device is not logged in to the connection

a) In the connection wizard (TV menu – Connec

wizard or is connected differently than is shown in the connection diagram.

tions – New devices/modifications), compare the connection diagram with the actual installation and connect as shown, if necessary.

b) The AV norm is set incorrectly.

b) Set the norm correctly.

c) The AV signal is set incorrectly.

c) Set the AV signal correctly.

If “Automatic” is set for AV norm or AV signal, this can lead to errors for signals which do not conform to the norm. Then the norm and the signal are to be set according to the specifications in the operating instructions of the external device.

A decoder connection does not function or is faulty. a) The signal is not decoded because the wrong

a) Follow the instructions in the connection wizard

decoder stations are selected in the connection wizard.

again (TV menu – Connections – New devices/ modifications) and select the corresponding decoder station.

b) The sound is missing in decoder mode because

b) Follow the instructions in the connection wizard

the wrong decoder sound is assigned in the con nection wizard.

again and select the right audio source (decoder, TV or autom.), see instructions of the decoder.

All menus appear in the wrong language. Menu language has been set incorrectly. Set your menu language: Press the INFO button in TV mode (index). Select the first index item and call it by using OK. Then select the language and confirm with OK.

Page 38 of the Loewe ConceptL26Basic user manual — Problem Possible cause Remedy
Page 38 · click to enlarge
Page 38

What to do, if ...

Problem Possible cause Remedy

Digital Link Plus does not function. a) Euro-AV cable is not fully wired (pin 10 not

a) Replace the Euro-AV cable.

wired).

b) Some recorders can only adopt stations during

b) Restore the recorder to the as-delivered state (see

the initial installation of the TV set.

recorder’s operating instructions).

c) All or some of the terrestrial and cable stations

c) Rearrange the terrestrial and cable stations so

are stored on station storage locations ≥ 99.

that they fall between 1 and 99.

Various characters are displayed incorrectly in the teletext.

The wrong character set is set in the teletext menu. Set the right character set: Teletext menu - Settings - Character set: standard or the appropriate character set.

No sound via external digital audio amplifier. a) The external digital audio amplifier does not sup

a) Set PCM stereo on the DVD player in the sound

port the selected sound format (Dolby Digital, dts, MPEG).

selection. For DVB stations, switch language/ sound selection (green coloured key) to Stereo on the TV set in the status display (END).

b) TV set and external digital audio amplifier are

b) Connect Digital-Out from the TV set to a Digital-In

not connected.

of the external digital audio amplifier and select the appropriate input to this.

Page 39 of the Loewe ConceptL26Basic user manual — Technical data
Page 39 · click to enlarge
Page 39

Technical data

General data

Loewe ConceptL26Basic — Technical data diagram (page 39)
Fig. 46 · Technical data

Type Concept L 26 Basic Concept L 26 Concept L 32 Basic Concept L 32

Versions TV terr. (analogue) Versions DVB-T/C Versions DVB-T CI (MHEG-5) Versions DVB-T/C CI

Set dimensions without stand (ca. cm WxHxD) Dimensions with stand (ca. cm WxHxD)

Set weight without stand (ca. kg) Set weight with stand (ca. kg)

Power consumption (IEC 62087) in operation (watt) in standby (watt)

Barometric pressure 800 – 1114 hPa (0 – 2000 m over NN)

The code number 3001 cancels out a

secret code and with it the child lock.

Please keep in a

safe place.

Page 40 of the Loewe ConceptL26Basic user manual — Connections
Page 40 · click to enlarge
Page 40

Technical data

Electrical data

Connections

Jack 3.5mm Headphones 32- 2000 ohm Mini-DIN (AVS) Video IN Y/C (S-VHS/Hi 8) CVBS (VHS/8 mm) Cinch (yellow) Video IN CVBS (VHS/8 mm) Cinch (white/red) Audio IN L/R IEC socket 75 Ohm/5 V/80 mA Antenna/cable/analogue PIP (1 /DVB-T/C F socket 75 Ohm 13/18 V/350 mA (1 ANT-SAT EURO-AV 1 Video IN Y/C (S-VHS/Hi 8) CVBS (VHS/8 mm) Video OUT CVBS (VHS/8 mm)

Chassis name L 2650 Power supply 220 V -240V/50- 60 Hz Tuner VHF/UHF/ cable Hyperband 8 MHz 41 MHz to 860 MHz Station storage locations 430 / for DVB 1680 TV standards B/G, I, L, D/K, M, N DVB-T, DVB-C, DVB-S

Colour standard SECAM, PAL, NTSC, NTSC-V, PAL-V (60Hz) Sound standard Mono/Stereo/Dual-channel

Y/C (S-VHS/Hi 8) Audio IN L/R Audio OUT L/R EURO-AV 2 Video IN Y/C (S-VHS/Hi 8) CVBS (VHS/8 mm)

Nicam B/G, I, L,

Virtual Dolby Rated audio power 2 x 20 watt Analogue Teletext TOP/FLOF Level 2.5 Page Memory (Concept L 26 / L 32) 1500 Page Memory (Concept L 26 Basic / L 32 Basic) 1000 Digital Teletext (only for MHEG-5 device versions) MHEG-5

RGB, YUV Video OUT CVBS Y/C, (only with SVHS Link Plus) Audio IN L/R Audio OUT L/R Cinch Audio IN max. 2Vrms Centre 2 x Cinch Audio IN L/R 2 x Cinch Audio OUT (level adjustable in active loud speakers) L/R Cinch COMPONENT IN: Cb/Pb signal Cinch COMPONENT IN: Cr/Pr signal Cinch COMPONENT IN: Y signal Cinch Digital Audio IN (SPDIF) Digital audio Cinch Digital Audio OUT (SPDIF) Digital audio HDMI/DVI Digital Video/Audio IN type A 19pin Digital video and audio VGA/XGA VGA/XGA IN PC/STB video signal Mini-DIN SERVICE Service/L-Link

(1 Set-specific equipment and retrofitting options for CI-Slot, PIP and satellite tuners, see pages 41 and 42.

TB/06/08/7.0 Subject to modifcations!

© by Loewe Opta 2006 Dolby and the double ´D´ symbol are trademarks of Dolby Laboratories

Printed in Germany

Page 41 of the Loewe ConceptL26Basic user manual — Common Interface (CI-Slot)
Page 41 · click to enlarge
Page 41

Accessories

Wall holders and stands

Loewe DVD players and recorders

Refer to the notes on the installations options on page 6.

The DVD players and recorders from Loewe are characterised by form and colour, which match Loewe TV sets, adapted user guidance and technology. A combination of the two devices forms a system which offers many advantages.

PIP tuner

The PIP tuner enables picture in picture displays (PIP) for analogue terrestrial and cable reception. You can retrofit either this PIP tuner or a digital satellite tuner. The PIP function is possible for both retrofit versions. You can find the retrofitting options for your set in the table on the next page. Loewe order no. 89442.080

Loewe audio system Auro and the active speaker system Individual Sound

The interplay of a Loewe TV with a Loewe audio system and a Loewe speaker system creates an excellently coordinated home cinema system. Advantages are high operating comfort, attractive design and adapted technology.

Digital Satellite tuner

You can have your TV set retrofitted with the digital satellite tuner. By using this tuner, you can receive DVB-S stations. The digital satellite tuner is completely integrated in the TV set (physically and logically) and is operated by the remote control/menu control of the TV. When you retrofit your TV set with the digital satellite tuner, your TV set auto matically has the PIP function. You can retrofit either this digital satellite tuner or a PIP tuner. You can find the retrofitting options for your set in the table on the next page. Loewe order no. 89361.056

Common Interface (CI-Slot)

The common interface (slot for CA-module) enables you to also receive en crypted stations. You can purchase the CA-module and Smart Card at your specialist dealer. You can find the retrofitting options for your set in the table on the next page. Loewe order no. 89346.080

Subject to delivery options.

Page 42 of the Loewe ConceptL26Basic user manual — Accessories
Page 42 · click to enlarge
Page 42

Accessories

Retrofitting options

The following table shows the equipment and retrofitting options for the individual device versions.

Device version / Equipment Item no. PIP tuner (1 Digital Single SAT-Tuner (2

Concept L 26 Basic 65433xxx – – –

Concept L 26 DVB-T CI 65421xxx (MHEG-5) – – ●

Concept L 26 DVB-T/C CI 65421xxx – ○ ●

Concept L 32 Basic 65434xxx – – –

Concept L 32 DVB-T CI 65442xxx (MHEG-5) – – ●

Concept L 32 DVB-T/C 66442xxx ○ ○ ○ ● available / installed ○ retrofittable / optionally available – retrofitting not possible

(1 You can retrofit either this PIP tuner or a digital satellite tuner.

(2 You can retrofit either this digital satellite tuner or a PIP tuner.

Common Interface (CI-slot)

Page 43 of the Loewe ConceptL26Basic user manual — Service
Page 43 · click to enlarge
Page 43

Service

Loewe Austria GmbH Parkring 10 1010 Wien, Österreich Tel.: +43 - 810/0810-24 (zum Ortstarif) E-Mail loewe@loewe.co.at

Kjaerulff 1 A/S C.F. Tietgens Boulevard 19 5220 Odense SØ, Denmark Tel. +45 - 66 13 54 80 Fax +45 - 66 13 54 10 Email mail@kjaerulff1.com

Loewe Italiana SRL Largo del Perlar, 12 37135 Verona (VR), Italia Tel. +39 - 045 82 51 619 Fax +39 - 045 82 51 622 Email [email protected]

DSV TRADING SA Plac Kaszubski 8 81-350 Gdynia, Polska Tel. +48 - 58 - 6 61 28 00 Fax +48 - 58 - 6 61 44 70 Email market@dsv.com.pl

International Dynamics Australasia Pty Ltd. 129 Palmer Street Richmond 3121, Victoria, Australia Tel. +61 - 3 - 94 29 08 22 Fax +61 - 3 - 94 29 08 33 Email mail@internationaldynamics.com.au

Gaplasa S.A. Conde de Torroja, 25 28022 Madrid, España Tel. +34 - 917 48 29 60 Fax +34 - 913 29 16 75 Email loewe@maygap.com

PL Trading (pz 2004) Ltd. 27, Aliat Hanoar St. Givataiim 53401, Israel Tel. +972 - 3 - 57 27 155 Fax +972 - 3 - 57 27 150 Email info@loewe.co.il

Service Center Loewe ul. Verkhnaya Maslovka, d. 29 125083 Moscow, Россия Tel. +7 - 495 612 50 43 Fax +7 - 495 612 47 10 Email [email protected]

Loewe Opta Benelux NV/SA Uilenbaan 84 2160 Antwerpen, België Tel. +32 - 3 - 2 70 99 30 Fax +32 - 3 - 2 71 01 08 Email [email protected]

Loewe Opta France S.A. 13 rue du Dépôt, Parc del l‘Europe, BP 10010 67014 Strasbourg Cédex, France Tel. +33 - 3- 88 79 72 50 Fax +33 - 3- 88 79 72 59 Email [email protected]

Mirage Holdings Ltd Flamingo Complex, Cannon Road Qormi, Malta Tel. +356 - 22 - 79 40 00 Fax +356 - 21 - 44 59 83 Email servicing@mirage.com.mt

Kjaerulff 1 AB Ridbanegatan 4, Box 9076 21377 Malmö, Sverige Tel. +46 - 4 06 79 74 00 Fax +46 - 4 06 79 74 01 Email Sweden@kjaerulff1.com

Telion AG Rütistrasse 26 8952 Schlieren, Schweiz Tel. +41 - 44 732 15 11 Fax +41 - 44 732 15 02 Email [email protected]

SOMARA S.A. 377, Rue Mustapha El Maani 20000 Casablanca, Morocco Tel. +212 - 22 22 03 08 Fax +212 - 22 26 00 06 Email [email protected]

BaSys Czech & Slovak s.r.o. Stará Vajnorská 17/A 831 04 Bratislava, Slovakia Tel.: + 421 2 49 10 66 18 Fax: + 421 2 49 10 66 33 Email: [email protected]

Kjaerulff 1 OY Artturinkatu 2 20200 Turku, Finland Tel. +358 - 2 284 1600 Fax +358 - 2 284 1601 Email Finland@kjaerulff1.com

Jadran Trgovsko Podjetje Partizanska cesta 69 6210 Sezana, Slovenija Tel. +386 - 57 31 04 40 Fax +386 - 57 31 04 42 Email [email protected]

HADJIKYRIAKOS & SONS LTD. Prodromou 121, P.O Box 21587 1511 Nicosia, Cyprus Tel. +357 - 22 87 21 11 Fax +357 - 22 66 33 91 Email Efthymios@hadjikyriakos.com.cy

CableCom AS Gneisveien 12 3221 Sandefjord, Norge Tel. +47 - 33 48 33 48 Fax +47 - 33 44 60 44 Email [email protected]

LinnSight Ltd. PO Box 8465 KA 7 2YF Prestwick, UK Tel. +44 - 12 92 - 47 15 57 Fax +44 - 12 92 - 47 15 54 Email helpline@linnsight.co.uk

Enkay Elektronik Servis Müdürlügü Alemdag Cad: Site Yolu No.: 10 Ümraniye/ Istanbul, Türkiye Tel. +90 - 216 634 44 44 Fax +90 - 216 634 39 88 Email mhatipog@enkaygroup.com

Ing. Ivo Tietz Dolní nám. 9 746 01 Opava, Česko Tel.: +420 553 624 944 Fax: +420 553 623 147 E-mail [email protected]

International Dynamics (NZ) Pty Ltd PO Box 109 317, Newmarket Auckland, New Zealand Tel.: +64 9 379 0179 Fax: +64 9 379 0279 E-mail: enquiries@internationaldynamics. co.nz

SIBA Engineering S.A. 6, Kifisou Av., 122 42 Aegaleo, Hellas Tel. +30 - 210 - 5913793 Fax +30 - 210 - 5317755 Email [email protected]

Loewe Opta GmbH, Customer Care Center Industriestraße 11 96317 Kronach, Deutschland Tel. +49 1801–22256393 Fax +49 9261–99500 Email [email protected]

Videonix (Pty) Ltd P.O. Box 31952, Kyalami 1684 Republic of South Africa Tel. +27 - 1 14 66 47 00 Fax +27 - 1 14 66 42 85 Email mail@loewe.co.za

Basys Magyarorszagi KFT Epitok utja 2–4 2040 Budaörs, Magyar Tel. +36 - 23 41 56 37 (121) Fax +36 - 23 41 51 82 Email [email protected]

Videoacústica Comercio e Representacoes de Equipamentos Electronicos S.A. Estrada Circunvalacao, Quinta do Paizinho, Arm. 5 2795-632 Carnaxide, Portugal Tel. +351 - 2 14 24 17 70 Fax +351 - 2 14 18 80 93 Email [email protected]

© by Loewe Opta 060502

Page 44 of the Loewe ConceptL26Basic user manual — Operating modes – PIP
Page 44 · click to enlarge
Page 44
Page 44 of the Loewe ConceptL26Basic user manual — Operating modes – PIP
Sources

References & links

Pages referenced in this manual — manufacturer, support and downloads.

Fix-it

Troubleshooting

Common problems, likely causes, and what to do.

ProblemPossible causeRemedy
The “Recording” menu point is not displayed in the TV menu.No video or DVD recorder logged in.Log in the video or DVD recorder in the connection wizard and connect the device. p.37
“Connections” cannot be called in the TV menu (deactivated).A time recording is in progress.Wait until the timer recording has ended or delete the timer. p.37
The control of the Loewe video recorder and the timer do not work or do not work properly.a) The Digital Link function is not activated or not possible in the recorder. b) Euro-AV cable is not connected. c) Recorder is not logged in.a) Activate Digital Link in the recorder (see operating instructions of the video recorder). b) Connect the Euro-AV cable. c) Log in recorder. p.37
General problems with connecting external equip­ ment via an AV input.a) The device is not logged in to the connection wizard or is connected differently than is shown in the connection diagram. b) The AV norm is set incorrectly. c) The AV signal is set incorrectly.a) In the connection wizard (TV menu – Connec­ tions – New devices/modifications), compare the connection diagram with the actual installation and connect as shown, if necessary. b) Set the norm correctly. c) Set the AV signal correctly. If “Automatic” is set for AV norm or AV signal, this can lead to errors for signals which do not conform to the norm. Then the norm and the signal are to be set according to the specifications in the operating instructions of the external device. p.37
A decoder connection does not function or is faulty.a) The signal is not decoded because the wrong decoder stations are selected in the connection wizard. b) The sound is missing in decoder mode because the wrong decoder sound is assigned in the con­ nection wizard.a) Follow the instructions in the connection wizard again (TV menu – Connections – New devices/ modifications) and select the corresponding decoder station. b) Follow the instructions in the connection wizard again and select the right audio source (decoder, TV or autom.), see instructions of the decoder. p.37
All menus appear in the wrong language.Menu language has been set incorrectly.Set your menu language: Press the INFO button in TV mode (index). Select the first index item and call it by using OK. Then select the language and confirm with OK. p.37
Digital Link Plus does not function.a) Euro-AV cable is not fully wired (pin 10 not wired). b) Some recorders can only adopt stations during the initial installation of the TV set. c) All or some of the terrestrial and cable stations are stored on station storage locations ≥ 99.a) Replace the Euro-AV cable. b) Restore the recorder to the as-delivered state (see recorder’s operating instructions). c) Rearrange the terrestrial and cable stations so that they fall between 1 and 99. p.38
Various characters are displayed incorrectly in the teletext.The wrong character set is set in the teletext menu.Set the right character set: Teletext menu - Settings - Character set: standard or the appropriate character set. p.38
No sound via external digital audio amplifier.a) The external digital audio amplifier does not sup­ port the selected sound format (Dolby Digital, dts, MPEG). b) TV set and external digital audio amplifier are not connected.a) Set PCM stereo on the DVD player in the sound selection. For DVB stations, switch language/ sound selection (green coloured key) to Stereo on the TV set in the status display (END). b) Connect Digital-Out from the TV set to a Digital-In of the external digital audio amplifier and select the appropriate input to this. p.38
No sound via external digital audio amplifier. p.38

Ask about the Loewe ConceptL26Basic

Owners and our team usually reply within a day — and your question helps the next person too.

Add your email to get notified when it’s answered — no spam, ever.

0 questions
No questions yet about the Loewe ConceptL26Basic

Be the first to ask — other owners or our team will answer.

Original document

Loewe ConceptL26Basic manual PDF

44 pages·5.8 MB·Flat Panel Television·PDF
Click any page above to open it here
Page 1 / …
100%
Loading pages…