Instruction/ maintenance manual of the product PRUNER Little Wonder
Go to page of 15
© 2006 Mantis, Div . of Schiller -Pfeiffer Inc. All Rights Reserved. Owner s Manual and Saf ety Instr uctions Pr uner “E” System.
1 T able of Contents Important Information A. Introduction This attachment is designed for trimming light to medium size branches. B. Pruner Attachment Specification. C. Contents of the package 1. Pruner Attachment Assembly with plastic gear case cover 2.
2 Safety and W arnings A. Safety Decals Please pay particular attention to the warning and information decals found on various parts of this Pruner Attachment unit. They are an important part of the safety system. These decals must be replaced in time due to abrasion, etc.
3 General Safety Rules 1. Remove branches in sections. Maintain safe operating positions, to avoid risk of being struck by falling branches or by those that rebound after hitting the ground 2. Cover saw chain with guard during transport and storage. 3.
4 Extension cord chart ( minimum cord gauge (A WG) ) 17. Stay alert . W atch what you are doing. Use common sense. Do not operate tool when you are tired, ill or under the influence of alcohol or other drugs.
5 1. Unscrew the mounting nut from the Gear Case Cover . Open the cover . (Picture 3) 2. Mount the Chain Guide. Be sure that threaded pin fits into the opening in the guide bar . (Picture 4) 3. Fit the saw chain into the groove in the Chain Guide bar , and around the sprocket.
6 1. Loosen mounting nut and adjust the chain tension by turning the tensioner screw 2. Hold unit vertically , and tighten mounting nut 3. Move saw chain backwards on guide bar by hand. Saw chain should move freely on guide bar if it is in proper mesh with the sprocket.
7 Check the balance of the assembled unit. The handles and shoulder harness have been assembled at the factory and set according to the average size person. This can be adjusted to the operator ’ s preference by simple loosening the screws and sliding handles up or down the shaft.
8 Service Maintenance Guide Area Maintenance procedure Frequency Spline male/female connection of the inner drive shaft Lubricate 20-25 Hrs Gear case Use a grease gun to insert lubricant into the grease nipple of the gear case. Use EP2 lithium grease 20-25 Hrs Guide bar Inspect/Clean/Replace The guide bar opening should be always a square.
9 Area Maintenance procedure Frequency Oiling port Inspect/Clean Before each use Nose sprocket Clean/Lubricate Before each use Saw chain Inspect/Clean/Sharpen/lubricate/Replace Before each use Screws/.
10 • A Low-kickback Chain • Low-vibration Chain • Narrow-kerf Chain FILING TOOLS FOR FILING Saw Chain Sharpening Procedur e Square-Gr ound Filing WHO SHOULD PERFORM SQUARE-GROUND FILING? Most chain saw users will probably never need to use square ground chain, nor learn to perform square ground filing.
11 GULLET FILING Approximately every 5th sharpening, clean out gullets with a 7/32" round file. File gullets from the inside out (the side opposite from sharpening). Leave a 1/8" shelf behind the gullet. The depth-gauge setting for all square-ground chisel chain is .
12 48 48 2 2 4 4 3 3 6 6 5 5 8 8 7 7 9 9 5 5 12 12 13 13 1 1 1 1 14 14 15 15 16 16 17 17 16 16 18 18 19 19 20 20 21 21 22 22 23 23 25 25 24 24 26 26 27 27 28 28 29 29 30 30 31 31 32 32 33 33 34 34 36 .
KEY # DESCRIPTION P ART # QTY 1 GEAR CASE COVER 3331 100 1 2 BEARING 6001-2Z 331 101 1 3 GEAR CASE 331 102 1 4 BEARING 627 331 103 1 5 BOL T M5X12 331500 5 6 GREASE FITTING 331104 1 7 SCREW , TENSIONE.
Specifications, descriptions, and illustrative material in this literature are as accurate as known at the time of publication, but are subject to change without notice.
An important point after buying a device Little Wonder PRUNER (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Little Wonder PRUNER yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Little Wonder PRUNER - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Little Wonder PRUNER you will learn all the available features of the product, as well as information on its operation. The information that you get Little Wonder PRUNER will certainly help you make a decision on the purchase.
If you already are a holder of Little Wonder PRUNER, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Little Wonder PRUNER.
However, one of the most important roles played by the user manual is to help in solving problems with Little Wonder PRUNER. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Little Wonder PRUNER along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
