Instruction/ maintenance manual of the product POWER WAVE POWER WAVE WELDING SYSTEMS Lincoln Electric
Go to page of 12
PO WER W A VE WELDING S Y S TEMS WITH PO WER FEED 10 AND 10 DU AL ™ ™ Pr emium MIG W elding Systems.
2 R R LISTED 170G U L Simple. Innovative. Technologically Advanced. These are all words that describe the Power Wave welding systems. These next generation systems utilize Waveform Control Technology™ for the finest welding arc in the industry.
TECHNICAL SPECIFICA TIONS Rated DC Output Input Amps at Rated DC Output Product Ordering Input AC Amps/Volts/ 208 230 380 415 460 575 Output Weight Dimensions Name Information Voltage Duty Cycle Range (net) HxWxD Power K1517-5 208/230/460 60 Hz: 5-570 247 lbs.
4 A CLOSER LOOK Large, Easy To Read Digital Meter Large, Easy To Use Voltage/ Trim Control Large, Easy To Use Wire Feed Speed/ Control Amperage Dual Head Select Panel (Standard on Power Feed 10 Dual M.
5 OPTIONAL CONTROL P ANELS DUAL PROCEDURE PANEL This panel stores two procedures in memory. The user may select procedure “A” or “B” at the switch with a separate gun mounted switch, or while welding with any welding gun. Order K1542-5. DUAL PROCEDURE / MEMORY Six different welding procedures and processes may be stored for recall.
6 M PANEL This optional control panel allows the user to select the type of output desired: CV-MIG/CV Gas-Shielded, Flux-Cored (Outershield,Metal-Cored), Flux-Cored (Innershield), or CC- Stick (Soft)/Gouge. The “Arc Control “ varies inductance in the CV modes and arc force in the CC-Stick mode.
NEW WIRE DRIVE ADV ANT AGES • Four gear driven rolls. No tools needed to snap rolls on or off. Each roll has two grooves of the same size to double feed life. • Revolutionary Split Wire Guide precisely aligns and supports wire through the entire system.
MAGNUM GUNS The following guns come pre-assembled with liner and gun connector that is compatible with the Tweco #2-#4 gun receiver bushing (K1500-2). They con- nect directly to the standard Power Feed 10 and 10 Dual. Gun cables are 15 ft. length: K471-21 Magnum 400 .
4 Roll, and Split Wire Guide Solid Steel Wire, Smooth V Groove .023-.030 (0.6-0.8mm) Solid KP1505-030S .035 (0.9mm) Solid KP1505-035S .040-.045 (1.0-1.2mm) Solid KP1505-045S .052 (1.4mm) Solid KP1505-052S 1/16” (1.6mm) Solid KP1505-1/16S Cored Steel Wire, Knurled V Groove .
10 RECOMMENDED OPTIONS SPINDLE ADAPTER For 14 lb. (6 kg) Innershield Coils Permits 14 lb. (6 kg) Innershield electrode coils to be mounted on 2” (51mm) O.D. spindles. Order K435. COIL ADAPTER 60 lb. Coil Adapter Adapts 60 lb. Lincoln coils of electrode to 2” (51mm) spindle.
Caster Kit - Light Duty Mounts to the wire reel stand on the Power Feed 10 and Power Feed 10 Dual. Allows for easy movement of wire feeder. Order K1556-1. Insulated Lift Bail Allows the entire wire feeder to be hung from a crane or hook. Order K1555-1.
THE LINCOLN ELECTRIC COMPANY Local Sales and Service through Global Subsidiaries and Distributors Cleveland, Ohio 44117-1199 U.S.A TEL: 216.481.8100 FAX: 216.486.1751 WEB SITE: www.lincolnelectric.com CC/CV Welders E5.160 12/99 DISTRIBUTED BY: SOFTW ARE Wave Designer Software Wave Designer software allows you to program your own waveforms.
An important point after buying a device Lincoln Electric POWER WAVE POWER WAVE WELDING SYSTEMS (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Lincoln Electric POWER WAVE POWER WAVE WELDING SYSTEMS yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Lincoln Electric POWER WAVE POWER WAVE WELDING SYSTEMS - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Lincoln Electric POWER WAVE POWER WAVE WELDING SYSTEMS you will learn all the available features of the product, as well as information on its operation. The information that you get Lincoln Electric POWER WAVE POWER WAVE WELDING SYSTEMS will certainly help you make a decision on the purchase.
If you already are a holder of Lincoln Electric POWER WAVE POWER WAVE WELDING SYSTEMS, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Lincoln Electric POWER WAVE POWER WAVE WELDING SYSTEMS.
However, one of the most important roles played by the user manual is to help in solving problems with Lincoln Electric POWER WAVE POWER WAVE WELDING SYSTEMS. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Lincoln Electric POWER WAVE POWER WAVE WELDING SYSTEMS along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
