Instruction/ maintenance manual of the product IM305-C Lincoln Electric
Go to page of 200
NA-5 A UTOMA TIC WELDING S Y S TEM 87 &.2&+$&0 For use with Models NA-5N #'&26&.
.-5&0&%&/3).+&,2 1.a. Turn the engine off before troubleshooting and maintenance work unless the maintenance work requires it to be running. ____________________________________________________ 1.b.
)) ! )) ARC R A Y S can bur n. 4.a. Use a shield with the proper filter and cover plates to protect your eyes from sparks and the rays of the arc when welding or observing open arc welding. Headshield and filter lens should conform to ANSI Z87.
))) ! ))) FOR ELECTRIC ALL Y pow ered equipment. 8.a. Turn off input power using the disconnect switch at the fuse box before working on the equipment. 8 .b . Install equipment in accordance with the U.S. National Electrical Code, all local codes and the manufacturer’s recommendations.
)4 ! )4 PRÉC A UTIONS DE SÛRETÉ Pour votre propre protection lire et observer toutes les instructions et les précautions de sûreté specifiques qui parraissent dans ce manuel aussi bien que les précautions de sûreté générales suiv- antes: Sûreté Pour Soudage A L’Arc 1.
NOTES.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
http://www .lincolnelectric.com/knowledge/articles/ content/steelhatconstruction.asp EW2357-A L 2.5. 10-A.
http://www .lincolnelectric.com/knowledge/articles/ content/speedfeeddrums.asp http://www .lincolnelectric.com/knowledge/articles/ content/drumhandling.asp Insulated friction free eyelet Speed Feed Drum Hat T urntable EW2357-A Sec. T2.5.7-A (Continued) File as Sec.
Sec. T2.5.7-B (FOR IM305) (File as Sec.L2.5.10-B for IM278) EW2357-B.
http://www .lincolnelectric.com/knowledge/articles/ content/speedfeeddrum.asp and view the Speed Sec. T2.5.7-B (File as Sec. L2.5.10-B for IM278) Assembly and Installation The Lincoln Electric Company.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
6-2-97 P-135-A P-135-A NA-5 SEC. T 7.1 – P ARTS LIST INDEX . RETURN TO MAIN INDEX Wire Feed Gear Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P-100-C Wire Feed Drive Roll Box (For Codes Below 8800 Only) .
.
Gear Box Asbly , (Includes Items 1-21) (95/1 Ratio): L5199-3 1 Gear Box Asbly , (Includes Items 1-21) (55/1 or 57/1 Ratio): L5199-2 1 Gear Box Asbly , (Includes Items 1-21) (142/1 Ratio): L5199-1 1 1 .
WIRE FEED DRIVE ROLL BOX P-100-D P-100-D 23 23 3 4 5 16 16 12 12 17 17 1 2 18 18 21 21 19 19 11 11 20 20 22 22 15 15 14 14 5 6 7 8 10 10 Part Numbers Part Numbers Part Numbers Part Numbers 09-27-2007.
1 Faceplate L4052 1 X X X 2* Idle Roll Assembly S12475 1 X X X 3* Incoming Guide T ube (3/32 thru 7/32”), Includes: S10168-4 1 X • • 3* Incoming Guide T ube (1/16 thru 3/32”), Includes: S10168-2 1 • X • 3* Incoming Guide T ube (.035 thru .
WIRE FEED DRIVE ROLL BOX (For Codes Above 8800) P-100-D.2 P-100-D.2 23 23 3 4 5 16 16 12 12 17 17 1 2 18 18 21 21 19 19 11 11 20 20 22 22 15 15 14 14 5 6 7 8 10 10 Part Numbers Part Numbers Part Numbe.
1 Gear Box Assembly See P-100-C 1X X X X 2 Face Plate L6987 1 X X X X 3* Idle Roll Assembly S12475 1 X X X X 4* Incoming Guide T ube (3/32 thru 7/32”) KP21 16-2 1 X • • • 4* Incoming Guide T ube (1/16 thru 3/32”) KP21 16-1 1 • X • • 4* Incoming Guide T ube [.
43 Head Support M8232 1 X X • Mounting Bracket (Not Used on T ractor Models) M6769 1 X • • Includes Items 68 thru 77 68 Welding Head Support Bracket, Includes: M4016 1 X X • 69 Draw Bolt (Head.
Wire Reel Shaft Asbly , Includes: M12908 1 1 1/2-13 x 1.00 HHCS CF000276 1 2 Lock W asher E106A-5 1 3 Plain W asher S9262-14 1 4 Plain W asher S9262-1 19 1 5 Brake Assembly , Includes: S14882 1 Brake .
NA-2, NA-2F & NA-2FV Cable Assembly (Power Source to Controls), Includes: K97* 1 Multi-Conductor Control Cable L41 12-1* 1 Electrode Cable L41 12-2* 1 Cable Assembly (Controls to Head), Includes: .
Cable Clamp S12024-1 2 Multi-Conductor Shielded Cable (T ach) Includes: L621 1-F* 1 Polarized Pin Connector S12020-17 1 Polarized Receptacle Connector S12023-10 1 Cable Clamp S12024-4 2 Electrode Cabl.
Wire Straightener , Includes: M10214 1 1 Body Assembly M1031 1 1 2 Bearing M9300-55 2 3 W asher S9262-140 1 4 Lock W asher E106A-3 1 5 5/16-18 HN CF000029 1 6 Socket Head Screw T9447-13 1 7 Rollpin T9967-30 2 8 Connecting Link T12141 1 9 Wire Guide S12551 1 10 #8-32 x .
09-27-2007 P-100-L P-100-L CROSS SEAM ADJUSTER F ACE PL ACE PL A TE TE 15 15 12 12 14 14 13 13 5 6 7 8 9 10 10 4 3 2 1 16 16 17 17 1 1 F ACE PL ACE PL A TE TE Part Numbers Part Numbers Part Numbers Part Numbers ITEM DESCRIPTION P ART NO.
Wire Straightener , Single Arc, Includes: M8269-1 1 X • Wire Straightener , T winarc, Includes: M8269-2 1 • X 24 Body M8268 1 X X 25 Cross Slide Screw S10159 1 X X 26 Bushing - Locates Slide Screw.
Wire Straightener , Includes: M12470 1 1 Body Assembly M1031 1-1 1 2 Bearing M9300-55 2 3 Roll Pin T9967-3 1 4 Lock W asher E106A-3 3 5 5/16-18 HN CF000029 1 6 Socket Head Screw T9447-20 1 7 Roll Pin T9967-30 2 8 Connecting Link T12141 1 9 Wire Guide M12469 1 10 #8-32 x .
K218 HORIZONT AL FILLET/LAP A TT ACHMENT P-101-C.a P-101-C.a 37 38 39 40 41 42 35 36 34 33 43 44 45 19 20 22 21 23 24 25 26 12 11 10 46 4 3 1 2 27 47 5 6 7 8 9 13 14 15 16 18 17 17 18 28 29 30 32 31 N.
1 Socket Head Screw T9447-10 4 2 Flat W asher S9262-23 4 3 Insulating W asher S10773-12 8 4 Insulating Bushing T8390 4 5 Nose Adapter M12478 1 6 Adapter Insulation T8391 1 7 Hex Jam Nut 5/16-18 1 8 Hex Head Cap Screw 5/16-18 x 1.
K233 (and K103) CONT ACT NOZZLE K104 LINC-FILL EXTENSION P-101-D.a P-101-D.a 1 2 4 5 3 6 7 8 10 11 9 1 2 3 4 5 6 9 10 7 8 NO TE A: The K103 nozzle f or the NA2 is identical to the K233 e xcept f or item A (nozzle inser t). For the NA2 use both the appropriate Item A and the appropriate outgoing guide tube (Item 15 of P-100-D).
Nozzle Assembly , Includes: K233 1 A Nozzle Insert, .035 - .052 Electrode S15106-.052 Note A 1 A Nozzle Insert, 1/16, 5/64 and 3/32 Electrode S15106-3/32 Note A 1 1 Nozzle Insulator S10493-1 1 2 Socke.
Horizontal Adjuster , Includes all Below K96 1 1 Cross Adjustment Block M13663 1 2 Cross Adjustment Screw Assembly S12734 1 3 End Cover Plate S10509-38 1 6 Head Lift Adjustment Shaft Assembly S10097 1.
Solenoid Assembly , Includes: K223 1 1 Solenoid Mounting Bracket L5276 1 2 Solenoid and V alve Assembly M1 1675-A 1 6 Strain Relief Grommet T9274-3 1 7 Cable Assembly M12664 1 9 Name Plate S13246 1 3-13-2000 ITEM DESCRIPTION P ART NO.
K129 SUBMERGED ARC TINY TWINARC ® P-101-G P-101-G 1 2 3 4 4 7 3 6 5 D C B A Spring Mounting Bracket Roll Pin Pressure Spring Asbly . Wing Screw Contact Pressure Shoe Part Numbers Part Numbers Part Nu.
T winarc - Complete - Includes All Below K129* 1 Nozzle Assembly - Stripped - Includes Items 1, 3, 5 & 6 M1 1609 1 .045 Wire Kit - Includes Items 2, 4, A & B KP1901-1 1 1/16 Wire Kit - Include.
K281 WIRE STRAIGHTENER FOR TINY TWINARC ® P-101-G.2.a P-101-G.2.a Part Numbers Part Numbers Part Numbers Part Numbers 05-10-2005 5A 5A 5 2 6 4A 4A 4 3 4B 4B 4C 4C 10 10 7 8 3C 3C 3B 3B 12 12 3A 3A 3B.
1 Base S15943 1 X X 2 T ension Arm S15946 1 X X 3 Roller Assembly , Includes: S15953-1 1 X • Roller Shaft (2 1/4” Shaft) T14099 1 X • Retaining Ring S9776-1 2 X • 3 Roller Assembly , Includes:.
FLUX HOPPER P-101-H P-101-H 241 237 250 252 SECTION AA 228 A 229 251 236 235 227 225 226 234 7 6 5 4 3 2 1 Part Numbers Part Numbers Part Numbers Part Numbers L3552 8-21-81P T12590 1-16-76H.
Flux Hopper Assembly , Includes: L3552-E 1 X • • Flux Hopper Assembly , Includes: (Standard) L3552-F 1 • X • Flux Hopper Assembly , Includes: L3552-G 1 • • X 225 Flux Hopper Base L3100 1 X.
K148 CONT ACT NOZZLE ASSEMBL Y K149 LINC-FILL EXTENSION ASSEMBL Y P-101-K P-101-K Part Numbers Part Numbers Part Numbers Part Numbers 1 1-4-98 5 7 13 13 14 14 8 17 17 14 14 6 23 23 18 18 15 15 16 16 4.
Nozzle Asbly (Wire Size 3/32 - .120-1/8), Includes: K148A 1 X • • • • Nozzle Asbly (Wire Size 5/32 - 3/16), Includes: K148B 1 • X • • • Nozzle Asbly (Wire Size .068 - 5/64), Includes: K148C 1 • • X • • Nozzle Asbly (Wire Size 5/32 - 3/16), Includes: L4621-4 & -6 1 • • • X • Nozzle Asbly (Wire Size 3/32 - .
K225 SUBMERGED ARC TWINARC KIT P-101-L P-101-L 129 101 102 108 125 126 127 109 107 11 9 120 11 8 11 7 11 6 11 5 121 11 3 11 4 128 124 11 2 103 104 105 106 11 0 123 122 111 Part Numbers Part Numbers Pa.
T winarc - Complete - Includes All Below K225 Nozzle Assembly - Includes Items 101 through 129 L5314-1 101 Adapter Plate M12478-1 1 102 Adapter Insulation T8391 1 103 Socket Head Screw T9447-10 4 104 .
K239 INNERSHIELD TWINARC KIT P-101-L.2 P-101-L.2 1 2 3 4 5 26 27 6 8 12 25 13 14 15 24 23 22 21 17 18 20 19 7 9 10 11 16 14 Part of item Socket HD. screw W ater cooled jacket asbly .
T winarc - Complete - Includes All Below K239 Nozzle Assembly L5421-1 ø 1 Adapter Plate & Roll Pin Assembly M12478-1 1 2 Hex Head Screw 5/16-18 x .
K231 (and K31*) CONT ACT NOZZLE ASSEMBL Y * For K31, order K231 assembly . All parts are interchangeable. P-101-M P-101-M Part Numbers Part Numbers Part Numbers Part Numbers 10-18-2006 125 125 118 118.
Nozzle Assembly , Includes Items 1 10 thru 125 as appropriate for wire size specified K231* 1 X • Nozzle Assembly , for L T34 ONL Y , Includes Items 1 10, 1 1 1, 1 18, 121 and 122; Order Items 1 19,.
K226 (and K32*) CONT ACT JA W ASSEMBL Y * For K32, order a K226 assembly . All parts are the same except Item 8. P-101-N P-101-N 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 25 26 27 20 23.
Contact Jaw Assembly - One Rectangular and One T apered Jaw - For 1/8 thru 7/32 Wire, Includes: K226-R 1 Contact Jaw Assembly - T wo T apered Jaws - For 3/32 and 1/8 Wire, Includes: K226-T 1 1 Socket .
TRA VEL CARRIAGE GENERAL ASSEMBL Y P-101-P (Supersedes P-52-C) P-101-P (Supersedes P-52-C) Part Numbers Part Numbers Part Numbers Part Numbers 3-8-82 89 88 91 901 93 94 91 92 93 94 19 1 C 21 20 B 73 7.
A Motor and Gear Box Assembly See P-101-R B Control Panel Assembly See P-101-O 1 Carriage Frame G1384 1 X X X 2 Upper Guide Wheel Assembly , Includes: T5335-1 4 X • • 2 Upper Guide Wheel Assembly .
33 Lockwasher E106A-4 2 X X X 34 Spring T5338 1 X X X 35 Shim - Swivel Motor Mount T10778-1 As Reqʼd XXX 35 Shim - Swivel Motor Mount T10778-2 4 X X X 37 Cable Clamp M8501 1 X X X 73 Choke Coil M8424.
C Head Mounting and Lift Mechanism (Includes all Below) L31 16 1 X • C Head Mounting and Lift Mechanism (Includes all Below) L5460 1 • X 10 Head Lift Mounting Plate S10292 1 X • 10 Head Lift Mou.
A Drive Motor and Gear Case Assembly , 144-1 Ratio, Includes All items in Column 1 Marked “X”. L3094-1* ø 1X • • A Drive Motor and Gear Case Assembly , 324-1 Ratio, Includes All items in Column 2 Marked “X”. L3094-2* 1 • X • A Drive Motor and Gear Case Assembly , 648-1 Ratio, Includes All items in Column 3 Marked “X”.
181 Caution Plate S10346 1 X X X 182 Round Head Screw - Dust Cap to Gear Case #10-24 x 1/2 4 X X X 183 Lock W asher E106A-1 4 X X X 184 Small Bearing Cage S10077 1 X X X 185 Small Bearing Cage Gasket .
K29 VERTICAL HEAD LIFT ASSEMBL Y NA1, 2, 3, 4 and 5 and LAF3, 4 and 5 P-101-S P-101-S 18 15 2 1 12 13 14 5 7 22 20 19 17 16 4 6 23 4 25 3 3 11 9 10 21 8 24 Part Numbers Part Numbers Part Numbers Part .
1 Head Lift Housing K29 1 X • 1 Head Lift Housing L5881 1 • X 2 Head Lift T ube M8228 1 X • 2 Head Lift T ube M8228-1 1 • X 3 Head Lift Lock Pin S16067 1 • X 3 Locating Key T12121 1 X • 4 .
HIGH FREQUENCY UNIT K238 P-101-T .a P-101-T .a TRANSFORMER RESISTOR T13260-3 CASE TERMINAL STRIP CAP ACIT OR RELA Y HI-FREQ CAP ACIT OR SP ARK GAP ASSBL Y AIR CORE TRANSFORMER SP ARK GAP M.
High Frequency Unit, Includes: K238 1 Capacitor S17571 1 T ransformer M15359 ø Resistor S10404-53 1 Case L3815-1 1 Case Cover L3816 1 Nameplate M9591 1 T erminal Strip S13323-1 1 Number Plate T10726-92 1 Relay S12807 1 Spark Gap Assembly S16501-3 1 Electrode T1 1236-1 4 R.
K386 NARROW GAP DEEP GROOVE SUBMERGED ARC NOZZLE P-101-U.a P-101-U.a 9 30 29 28 27 10 11 12 13 14 15 16 17 26 123456 8 31 7 18 19 20 21 22 23 24 25 N.E.
1 Nozzle T ip T14879-3/32 1 2 Hollow Set Screw T12932-2 1 3 Ceramic Insert T12576-1 1 4 Ceramic Insert T12576-2 4 5 Spring Liner T12931-35 1 6 Nozzle T ube Assembly S17543 1 7 Insulation Jacket S17545.
1 Nozzle T ip - .062 Wire Size S17614-062 1 1 Nozzle T ip - .068 Wire Size S17614-068 1 1 Nozzle T ip - 5/64 Wire Size S17614-5/64 1 1 Nozzle T ip - 3/32 Wire Size S17614-3/32 1 1 Nozzle T ip - .120 Wire Size S17614-120 1 2 Straight Nozzle Assembly .062 - 3/32 Wire Size M14808-1 1 2 Straight Nozzle Assembly .
NOTES.
Solid State Remote Field Control, Includes: K224 1 1 T op Door M10639-4 1 2 T erminal Strip S14530-1 1 Number Plate T10726-90 1 4 Capacitor S10593 1 5 Auto T ransformer M12702 ø 1 6 Box Assembly M127.
Concentric Flux cone, Includes: K285 1 X 1 Side Plate T14177 1 X 2 Thumb Screw T9078-1 1 X 3 Support Arm M13455 1 X 4 Sems Screw T10082-4 4 X 5 Flux Cone M13454 1 X 6 Hose Clamp S10888-31 2 X Items Not Illustrated Flux Hose T10642-10 1 X Flux Hose T ube T6996-9 1 X 10-28-98 ITEM DESCRIPTION P ART NO.
K278-1 SPREADARC – COMPLETE ASSEMBL Y P-1 14-K.2 P-1 14-K.2 Part Numbers Part Numbers Part Numbers Part Numbers 08-29-2006 1 2 12 12 8 3 4 11 11 5 9 13 13 14 14 15 15 5 7.
1 Carriage & T rack Assembly See P-1 14-L.2 1 2 Bottom Shield M13277-1 1 Thread Forming Screw S9225-70 4 3 T op Shield M20176 1 #10-24 x .50 HHCS CF000371 4 Lock W asher T9695-1 4 4 Proximity Sensor Bracket M20331 1 Grommet T12380-4 1 #10-24 X .
Carriage & T rack Asbly (L12002), Includes: NSS 1 Carriage Assembly See P-1 14-M.2 1 2 T rack Assembly (M20165), Includes: NSS 1 T rack Support Welded Assembly M20166 1 T rack S15882 2 3/8-16 x .
NOTES.
04-05-2006 P-1 14-M.1 P-1 14-M.1 SPREADARC CARRIAGE ASSEMBL Y (K278-1) 4A 4A 2B 2B 2C 2C 2D 2D 2E 2E 8C 8C 8D 8D 1 5 6 4C 4C 4B 4B 4D 4D 4E 4E 4F 4F 8B 8B 8A 8A 3A 3A 3C 3C 3B 3B 2A 2A 7E 7E 7C 7C 7A .
ITEM DESCRIPTION P ART NO. QTY . 12 34 5 6 7 89 Carriage Assembly (L12007), Includes NSS 1 Carriage M20174 1 2A Head Mounting Plate S15872 1 2B 1/2-13 x 2.
1 Box Welded Assembly S15316 1 X • 1 Box Welded Assembly S15316-1 ø 1• X 2 Box Cover S15347 1 X X Self T apping Screw S8025-12 2 X X 3 Box Connector T9639-2 1 or 2 X X 4 Grommet S10255-14 2 X •.
03-23-05 P-132-A P-132-A TC-3 SELF-PROPELLED TRA VEL CARRIAGE RETURN TO MAIN INDEX Parts Lists Index For K325-S, K325-F , (Use Column One on P-132-C, -D, & -F) For K325-HC, K325-HC-F , (Use Column T wo on P-132-C, -D, & -F) TC-3 General Assembly .
TC-3 GENERAL ASSEMBL Y P-132-C P-132-C 27 28 19 20 21 22 9 25 24 23 27 10 12 13 14 26 18 17 16 15 30 29 47 33 34 35 36 48 50 49 7 37 8 38 3 4 2 1 46 45 40 44 42 43 42 43 41 40 39 42 43 41 28 Part Numb.
Carriage Assembly (K325-S 5-75 in/min) Includes: (Below Code 8400) G1326-1 1 X • Carriage Assembly (K325-S 5-75 in/min) Includes: (Code 8400 to 9000) G1565-1 1 X • Carriage Assembly (K325-S 5-75 i.
TC-3 GENERAL ASSEMBL Y P-132-C.2 P-132-C.2 27 28 19 20 21 22 9 25 24 23 27 10 12 13 14 26 18 17 16 15 30 29 47 33 34 35 36 48 50 49 7 37 8 38 3 4 2 1 46 45 40 44 42 43 42 43 41 40 39 42 43 41 28 Part .
22 Lower Bearing Bar Assembly , Includes: M12980-1 1 • X 22 Lower Bearing Bar Assembly , Includes: M12980-2 1 X • Bearing M9300-67 2 • X Bearing M9300-6 2 X • 23 Drive Wheel (Rack T ooth-Std. Below Code 9000- Option Above 9000) T13586 1 X X 23 Drive Wheel (Helical T ooth-Std.
MOT OR AND GEAR BOX ASSEMBL Y P-132-D.a P-132-D.a 4 1 2 3 Part Numbers Part Numbers Part Numbers Part Numbers 9-1 1-86 L5197 9-1 1-86.
1 Motor & Adapter Assembly (K325S & K325HC-S) Includes: L5195-4 1 X • 1 Motor & Adapter Assembly (K325F & K325HC-F) Includes: L5195-1 1 • X Motor Assembly , Includes: L5198-3 1 X .
GEAR BOX ASSEMBL Y Gear Ratio is stenciled on the side of the gear case and on top of Item 12. P-132-E.a P-132-E.a 1 6 13 21 3 2 4 5 7 8 9 11 12 10 15 14 16 17 18 19 20 Part Numbers Part Numbers Part .
Gear Box Assembly (K325S & K325HC-S) (142/1 Ratio) L5199-4 1 X Gear Box Assembly (K325F & K325HC-F) (57/1 Ratio) L5199-5 1 X Gear Box Assembly (K579-1, K580 & K581) (21/1 Ratio) L5199-7 ø.
TRA VEL CONTROL BOX ASSEMBL Y P-132-F .a P-132-F .a 14 5 16 15 12 13 7 8 6 4 9 1 11 2 3 10 20 17 18 Part Numbers Part Numbers Part Numbers Part Numbers 1 1-2-84 M14172 6-25-82M.
1 T ravel Control Box S16128 1 X X 2 T ravel P .C. Board Insulation T14189 1 X X 3 T ravel P .C. Board L6944-1 1 X X 4 A.C. Relay S13929-2 1 X X 5 Circuit Breaker T12287-8 1 X X 6 Switch T10800-7 1 X X 7 Insulation T12792-1 1 X X 8 Potentiometer T10812-71 1 X X Knob T10491 1 X X 9 Resistor S10404-73 1 X X Round Head Screw #10-24 x 2.
NOTES.
Drive Motor & Connection Box Assembly , Includes: (57/1 Ratio W/O H.F .) M13902-1 1 Drive Motor & Connection Box Assembly , Includes: (95/1 Ratio W/O H.F .) M13902-2 1 Drive Motor & Connection Box Assembly , Includes: (142/1 Ratio W/O H.F .
1 Drive Motor Assembly , Includes: (57/1 Ratio W/O H.F .) L6440-1 1 Drive Motor Assembly , Includes: (95/1 Ratio W/O H.F .) L6440-2 1 Drive Motor Assembly , Includes: (142/1 Ratio W/O H.F) L6440-3 1 Drive Motor Assembly , Includes: (57/1 Ratio W/H.F .
1 Cover Assembly T14326 1 2 Motor Adapter Plate M10255-1 1 3 Flat Head Screw #8-32 x .75 3 4 Hose Clamp S10888-20 1 5 Connection Box Assembly M13901 1 6 Cable Assembly , Includes: L6209 1 Polarized Co.
CONTROL BOX ASSEMBL Y P-135-D P-135-D 10-7-96 G1555 7-24-81.
1 Door Assembly See P-135-E 1 2 Lead Clamp T12563-8 1 4 V olts Meter Printed Circuit Board L6685 1 5 Speed Meter Printed Circuit Board (Standard) L6233 1 5 Speed Meter Printed Circuit Board (High Spee.
1 Control Box Door (Below Code 1 1000) S16706 1 1 Control Box Door (Above Code 1 1000) S16706-1 1 3 Nameplate (Below Code 1 1000) L6243 1 3 Nameplate (Above Code 1 1000) L6243-1 1 5 Nameplate Cover S1.
1 Control Box Welded Assembly (Code 8205 Only) S16707 1 Control Box Welded Assembly (All Other Codes) S16991-1 1 2 Relay S22182 3 3 Plug Button T13597-1 3 4 Thread Cutting Screw S9225-36 1 Lock W ashe.
K349 MUL TI-PROCEDURE KIT P-135-G P-135-G 1-29-2002 12 11 13 8 7 19 10 9 14 17 15 16 3 4 1 2 5 6 17.
1 Control Box M14288 1 2 Control Box Cover S17147 1 3 Printed Circuit Board Insulation S17139 1 4 Multi-Procedure P .C. Board G1567-2 1 5 Remote Selection P .
NOTES.
.
G 1 5 5 3 A DIGITAL METER VOLTMETER BOARD SP EE D- METER BOARD 5 1 0 5 1 9 6 0 2 6 0 1 2 5 3 4 1 6 5 1 8 5 1 0 5 1 7 5 1 0 P 6 0 2 6 0 1 5 1 0 P 5 1 0 P 6 0 2 6 0 1 5 1 0 5 1 0 5 1 9 5 1 0 P 6 0 2 6 0 1 DIGITAL METER 2 5 3 4 1 6 WORK WELDING NOZZLE ARM.
.
L6227 DIMENSION PRINT.
L6228 DIMENSION PRINT.
.
.
.
K349 MUL TI-PROCEDURE KIT.
.
NOTES.
.
.
• Sales and Service through Subsidiaries and Distributors Worldwide • Cleveland, Ohio 44117-1199 U.S.A. TEL: 216.481.8100 FAX: 216.486.1751 WEB SITE: www.
An important point after buying a device Lincoln Electric IM305-C (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Lincoln Electric IM305-C yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Lincoln Electric IM305-C - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Lincoln Electric IM305-C you will learn all the available features of the product, as well as information on its operation. The information that you get Lincoln Electric IM305-C will certainly help you make a decision on the purchase.
If you already are a holder of Lincoln Electric IM305-C, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Lincoln Electric IM305-C.
However, one of the most important roles played by the user manual is to help in solving problems with Lincoln Electric IM305-C. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Lincoln Electric IM305-C along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
