Instruction/ maintenance manual of the product MULTISET PRO MDC20 Lightolier
Go to page of 8
I NST ALLA TION AND O PERA TIONS M ANUAL M UL TI S ET P RO ® - P RE -W IRED D IMMING C ABINET MDC20 M UL TI S ET P RO ® - P RE -W IRED D IMMING C ABINET MDC20 ABCD 1 2 3 4 5 Made in U.S.A. For technical/sales assistance, call: 1-800-526-2731 www.lolcontrols.
CAUTION : Be sure that power to the load being controlled is disconnected by removing fuse or turning circuit breaker off. Installing MultiSet Pro® dimmers or Masters with power on may expose you to dangerous voltage and damage the device. A qualified electrician should perform this installation.
M UL TI S ET P RO ® - P RE -W IRED D IMMING C ABINET MDC20 Installation and Operation 3 Cabinet Installation 1 1 1 1 BACK Terminal Bl ocks (see descri ptions below ) Dimmer Detail C Interior: - Termi.
Replacing the Keypad Button Labels (Classic Series) MultiSet Pro® Classic Series Masters are supplied with over 260 labels to personalize the buttons for your own scene names. The buttons are labeled at the factory with letters. These button labels can easily be changed to customize your system: 1.
5 Dimmer/Switch Operating Instructions M UL TI S ET P RO ® D IMMER • T o T urn light on to preset level, tap top of rocker, the dimmer fades up at the 1.
6 Changing the Fade Rate MultiSet Pro® Dimmers can be programmed for 12 different fade rates. Dimmers can be programmed to have a different fade rate on each scene. The fade rate choices are: 1.5 seconds 1 minute 3 seconds 2 minutes 4.5 seconds 5 minutes 7.
Setting the Button Brightness (Ellipse Series) The brightness level of each Ellipse Master Control Station button can be programmed to 100% (factory default), 75%, 50%, or 25%.
Lightolier ® Controls A Genlyte Company 10911 Petal Street • Dallas, T exas 75238 18.0" 4.0" 1.5" 20.1" 45.5" 45.5" This product may be covered by one or more of the following U.
An important point after buying a device Lightolier MULTISET PRO MDC20 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Lightolier MULTISET PRO MDC20 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Lightolier MULTISET PRO MDC20 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Lightolier MULTISET PRO MDC20 you will learn all the available features of the product, as well as information on its operation. The information that you get Lightolier MULTISET PRO MDC20 will certainly help you make a decision on the purchase.
If you already are a holder of Lightolier MULTISET PRO MDC20, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Lightolier MULTISET PRO MDC20.
However, one of the most important roles played by the user manual is to help in solving problems with Lightolier MULTISET PRO MDC20. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Lightolier MULTISET PRO MDC20 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
