Instruction/ maintenance manual of the product W286L LG Electronics
Go to page of 33
User's Guide _V_ake sure to read the Impo_ant Precautions before using the product. Keep the User's Guide(CD)in an accessibleplacefor future reference.
This unit has been engineered and manufactured to ensure your personal safety, however improper use may result in potential electrical shock or fire hazards. In order to allow the proper operation of all safeguards incorporated in this display, observe the following basic rules for its installation, use, and servicing.
On Installation Do not allow anything to rest upon or roll over the power cord, and do not place the display where the power cord is subject to damage, Do not use this display near water such as near .
On Cleaning • Unplug the display before cleaning the face of the display screen, • Use a slightly damp (not wet) cloth, Do not use an aerosol directly on the display screen because over-spraying m.
!!! Thank for selecting LGE products !!! • Please make sure the following items are included with your monitor. If any items are missing, contact your dealer. User's Guide/Cards Power Cord DVI-D Signal Cable (This feature is not available in all countries.
• Before setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices is turned off. Connecting and Disassembling the stand 1, Place the monitor face down on the soft cloth. 2. Assemble the Stand Base into the Stand Body in the correct direction.
3. Turn the screw to the right to fix the Stand Body to the Stand Base. Screw Turn the screw by using the screw handle. 4, Then fold the screw handle flat. 5, Once assembled take the monitor up carefully and face the front side. 6. To disconnect the Stand Base from the Stand Body, unfold the screw handle and turn it to the left.
• Before setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices is turned off. Positioning your display After installation, adjust the angle as shown below. 1, Adjust the position of the panel in various ways for maximum comfort.
Connecting with the PC/AV equipment 1. Before setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices is turned off. 2. Connect the signal cable @. When attached, tighten the thumbscrews to secure the connection.
4, Gather the cables together and use the Cable Holder to arrange them as shown in the picture. Cable Holder !i: ¸ 5, Press the Power Button ((_) on the front panel to turn the power on. When monitor power is turned on, the 'Self Image Setting Function' is executed automatically.
Front Panel Controls srnOrt Button Use this button to enter CINEMA MODE, AUTO BRIGHT, TIME CONTROL, LIVE SENSOR or SMART menus. For more information, refer to page 16. F:U£1 Button Use this button to move to EZ ZOOMING, 4:3 IN WIDE and PHOTO EFFECT for D-SUB/DVI-D signal input.
Use these buttons select functions in the On A Buttons to or adjust Screen Display. .,f.ENGINE • Use this function to select optimal image conditions in accordance with the surrounding environment (Brightness, Image type). For more information, refer to page 19.
Power Indicator The indicator redifthe is power stays display running properly (On Mode). If the display is in Sleep Mode (Energy Saving), the power indicator is blinking red.
Screen Adjustment Making adjustments to the image size, position and operating parameters of the display is quick and easy with the On Screen Display Control system.
The following table indicates all the On Screen Display control, adjustment, and setting menus. : D-SUB(Analog signal) input DVI-D(Digital signal)input HDMI input To focus on the moving picture select.
MOVIE To select or customize desired image settings To adjust the brightness, contrast and gamma of the screen LANGUAGE OSD POSITION To customize the screen status for a use¢s operating environment.
The OSD screen will appear when you press the smOrt button on the front of the monitor. CONTR©/o I • MENU:Exit, • • •:Move, • SET :Select CINEMA MODE To focus on the moving picture selected.
,_;nn The OSD screen will appear when you press the FUN button on the front of the monitor. D-SUB/DVI-D input • MENU : Exit • • • : Move • SET :Select HDMI input EZ ZOOMING To select the display resolution. When you select 'EZ ZOOMING' in OSD, display resolution goes one step down so characters and images look bigger.
PHOTO EFFECT Use the AUTO/SET button to go to sub-menu. !_ PHoTo EFFECT To select the color effects of the screen. • NORMAL The PhotoEffect function is disabled. • GAUSSIAN BLUR This menu changes the screen to be more colorful and smoother. • SEPIA This menu changes the screen to be Sepia tone (brown color).
The OSD screen will appear when you touch the jI_ENGINE button on the left bottom of the monitor. These features let you easily select the best desired image condition optimized to the environment (ambient illumination, image types etc).
D-SUB/DVI-D input DEMO This is used for advertisingin the store. The screen will be divided to show the standard mode on the left and video mode on the right so that the consumerscan check the differenceafter applying the video mode. SPORTS Select this when you watching generalsports.
_ • You were introduced to the procedure of selecting and adjusting an item using the OSD system. Listed below are the icons, icon names, and icon descriptions of the all items shown on the Menu. Press the MENU Button, then the main menu of the OSD appears.
i _ PICTURE D-SUB/DVI-D input BRIGHTNESS CONTRAST GAMMA BLACK LEVEL To adjust the brightness of the screen. To adjust the contrast of the screen. Set your own gamma value. : -50 / 0 / 50 On the monitor, high gamma values display whitish images and low gamma values display blackish images.
TRACKING HORIZONTAL VERTICAL To move image left and right. To move image up and down. • MENU : Exit • • : Decrease • • :Increase • SET : Select another sub-menu CLOCK PHASE SHARPNESS To minimize any vertical bars or stripes visible on the screen background.
SETUP D-SUB input SETUP • MENU : Exit • • : Adjust • • • Adjust • SET • Select another sub-menu LANGUAGE OSD POSITION WHITE BALANCE OVERSCAN RTC POWER INDICATOR FACTORY RESET To choose the language in which the control names are displayed.
Check the following before calling for service. @ Is the power cord of the display connected? @ Is the power indicator light on? @ Is the power on and the power indicator red? @ Is the power indicator.
@ Display Position is incorrect. @ On the screen background, vertical bars or stripes are visible. @ Any horizontal noise appearing in any image or characters are not clearly portrayed. • Press the AUTO/SET button to automatically adjust your display image to the ideal setting.
@ The screen color is mono or abnormal. @ The screen blinks. • Check if the signal cable is properly connected and use a screwdriver to fasten if necessary. • Make sure the video card is properly insertedin the slot. • Set the color setting higherthan 24 bits (true color) at Control Panel - Settings.
21.995 inches _55.8673 cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size : 55.8673 cm 0.282 x 0.282 mm (Pixel Pitch) Horizontal Freq.
24 inches (60.97 cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size : 60.97 cm 0.2767 x 0.2767 mrr _Pixel Pitch) Horizontal Freq.
Preset Modes (Resolution)- D-sub(Analog) / DVI-D(Digital) INPUT W2286L 1 VGA 720 X 400 31.468 70 2 VESA 640 x 480 31.469 60 3 VESA 640 x 480 37.500 75 4 VESA 800 x 600 37.879 60 5 VESA 800 x 600 46.875 75 6 VESA 1024 x 768 48.363 60 7 VESA 1024 x 768 60.
HDMI Vedio INPUT 1 2 3 4 5 6 7 8 48op 31,5o 60 576p 31,25 50 72oP 37,50 50 72op 45,00 60 lO8Oi 28,12 50 lO8Oi 33,75 60 lo8oP 56,25 50 lo8oP 67,50 60 Indicator On Mode Red Sleep Mode Red Blinking Off M.
D[gffa[[y yours o o o o oooo.
An important point after buying a device LG Electronics W286L (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought LG Electronics W286L yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data LG Electronics W286L - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, LG Electronics W286L you will learn all the available features of the product, as well as information on its operation. The information that you get LG Electronics W286L will certainly help you make a decision on the purchase.
If you already are a holder of LG Electronics W286L, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime LG Electronics W286L.
However, one of the most important roles played by the user manual is to help in solving problems with LG Electronics W286L. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device LG Electronics W286L along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
