Instruction/ maintenance manual of the product N225WU LG Electronics
Go to page of 32
ww w .lg.c om O WNER'S MANU AL NET W ORK MONIT OR N19 5WU N225WU Please r ead the safe t y inf ormation carefully bef or e using the product . Network Monitor Models ENGLISH.
2 ENG ENGLISH T able of Contents T ABLE OF CONTENTS 3 ASSEMBLING AND PREP ARING 3 Unpacking 4 Parts and buttons 7 Lifting and moving the Monitor set 7 Setting Up the Monitor set 7 - Attaching the Stan.
3 ENG ENGLISH ASSEMBLING AND PREP ARING ASSEMBLING AND PREP ARING Unpacking Please check whether all the components are included in the box before using the product. If there are missing components, contact the retail store where you purchased the product.
4 ENG ENGLISH ASSEMBLING AND PREP ARING Parts and buttons Power Indicator y LED On : Power is on y LED Off: Power is of f Front Buttons Input Connectors (See p.13 to 14) (Power Button) Input Connectors (See p.15) y Keep radio away 10 cm from the front side buttons and power button.
5 ENG ENGLISH ASSEMBLING AND PREP ARING Power Indicator y LED On : Power is on y LED Off: Power is of f Front Buttons Input Connectors (See p.13 to 14) (Power Button) Input Connectors (See p.15) y Keep radio away 10 cm from the front side buttons and power button.
6 ENG ENGLISH ASSEMBLING AND PREP ARING Button Description MENU Activates the main menu. OSD Lock/Unlock Functions Locks/unlocks the OSD screen. y T o lock the OSD screen, press and hold the MENU button for several seconds. The "OSD LOCKED" message will be displayed and the screen will be locked.
7 ENG ENGLISH ASSEMBLING AND PREP ARING Setting Up the Monitor set Attaching the Stand Base 1 Place the monitor's screen face down. y T o protect the sc reen from scratches, cover the surface with a soft cloth. 3 Using a coin, turn the screw clockwise to se- cure the stand base.
8 ENG ENGLISH ASSEMBLING AND PREP ARING y The components appearing in the illustra- tions may look different from the actual prod- uct. y Do not carry the monitor upside-down as this may cause it to fall off its stand, resulting in damage or injury .
9 ENG ENGLISH ASSEMBLING AND PREP ARING Mounting on a table 1 Lift the monitor and place it on the table in an upright position. Install at least 10 cm away from the wall to ensure sufficient ventilation. 2 Connect the adaptor to the monitor , then plug the power cord into the wall outlet.
10 ENG ENGLISH ASSEMBLING AND PREP ARING Using the Kensington locking device The connector for the Kensington lock is located on the rear of the monitor . For more information on installation and usage, refer to the Kensington lock user manual or visit the website at http://www .
11 ENG ENGLISH ASSEMBLING AND PREP ARING Installing the wall mount plate This monitor has a VESA compatible mount on the back. Most mounts will require an LG mounting plate. Detaching the stand body 1 Place the monitor's screen face down. T o protect the screen from scratches, cover the surface with a soft cloth.
12 ENG ENGLISH ASSEMBLING AND PREP ARING 10 cm 10 cm 10 cm 10 cm y Unplug the power cord before moving or in- stalling the monitor to avoid electric shocks. y The wall mount kit includes the installation guide and necessary parts. y The wall mounting bracket is optional.
13 ENG ENGLISH USING THE MONITOR SET USING THE MONIT OR SET U s i n g P r i m a r y S t a t i o n y This monitor supports the *Plug and Play feature. *Plug and Play: A feature that allows you to add a device to your computer , without having to reconfigure anything or install any manual drivers.
14 ENG ENGLISH USING THE MONITOR SET NOTE NOTE U s i n g S t a n d a r d S t a t i o n s USB cable connection - PC The digital signal is transmitted from the PC to the monitor through the USB cable. Connect the PC and the monitor using the A-B type USB cable provided as shown in the picture below .
15 ENG ENGLISH USING THE MONITOR SET Peripheral device connection Connect peripheral devices to the monitor using USB, headphone, speaker , and microphone ports. Right Bottom y If a PS2 keyboard and mouse are connected to the PC audio device in a multi-computing environment (normal mode), the sound output will be supported through the analog port.
16 ENG ENGLISH CUSTOMIZING SETTINGS M E N U S M A RT + VO L U M E I N P UT EX I T MONITOR SETUP A U T O Front Side Buttons CUST OMIZING SETTINGS Accessing The Main Menus 1 Press any button on the front of the monitor to display the MONITOR SETUP OSD menu.
17 ENG ENGLISH CUSTOMIZING SETTINGS MENU Settings Picture 1 Press any button on the front of the monitor to display the MONITOR SETUP OSD menu. 2 Press the MENU button to display the options in the OSD menu. 3 Set the options by pressing the buttons on the front of the monitor .
18 ENG ENGLISH CUSTOMIZING SETTINGS Menu Analog (D-SUB) USB Description COLOR TEMP o o Allows PRESET or USER to be selected. PRESET o o W ARM Sets the screen color to a reddish tone. MEDIUM Sets the screen color between the reddish and bluish tone. COOL Sets the screen color to a bluish tone.
19 ENG ENGLISH CUSTOMIZING SETTINGS Menu Analog (D-SUB) USB Description HORIZONT AL o x Moves the display area left or right. VERTICAL o x Moves the display area up or down. CLOCK o x If vertical lines are shown on the screen, adjust the frequency to mini- mize the lines and adjust the screen's horizontal width.
20 ENG ENGLISH CUSTOMIZING SETTINGS EXIT MENU VOLUME Menu Analog (D-SUB) USB Description VOLUME x o T o adjust the volume of headphone/Speaker . (Only for USB input) V olume 1 Press any button on the front of the monitor to display the MONITOR SETUP OSD menu.
21 ENG ENGLISH CUSTOMIZING SETTINGS Menu Analog (D-SUB) USB Description LANGUAGE o o Sets the menu screen to the desired language. POWER OFF OSD x o Enables or disables the power off message when turning power of f. If it is set to "Off", the power of f message is not displayed while maintaining client connection.
22 ENG ENGLISH CUSTOMIZING SETTINGS Menu Analog (D-SUB) USB Description ON o o If select on,it automatically controls the brightness of display to best suit the surrounding working environment,providing the optimal viewing condition and maximized user convenience.
23 ENG ENGLISH CUSTOMIZING SETTINGS Menu Analog (D-SUB) USB Description WIDE o o Switch to full screen mode according to input image signal. ORIGINAL o o Change the input image signal ratio to original. This function works only if input resolution is lower than Monitor set ratio (16:9).
2 4 ENG ENGLISH CUSTOMIZING SETTINGS 1 Press any button on the front of the monitor to dis- play the MONITOR SETUP OSD menu. 2 Press the AUTO button to automatically adjust the screen. 3 Select EXIT to leave the OSD menu. T o return to the upper menu or set other menu items, use the up arrow ( ) button.
25 ENG ENGLISH T roubleshooting TROUBLESHOOTING Nothing is displayed on the screen I s t h e m o ni t o r' s po w e r c o rd p lu g g ed i n? y Check if the power cord is correctly plugged in to the outlet. Is the power indicator on? y Check the power indicator .
26 ENG ENGLISH T roubleshooting The image is displayed abnormally . Does the display area appear uncentered? Pressing the AUTO button will automatically optimize the screen to the current display mode. If you are not satisfied with the optimized screen, you can manually adjust the POSITION option in the OSD menu.
27 ENG ENGLISH Product Specication PRODUCT SPECIFICA TION LCD Screen T ype 470.1 mm (18.51 inch) TFT (Thin Film T ransistor) LCD (Liquid Crystal Display) Screen Diagonal length of the screen: 470.
28 ENG ENGLISH Specications LCD Screen T ype 546.8 mm (21.53 inch) TFT (Thin Film T ransistor) LCD (Liquid Crystal Display) Screen Diagonal length of the screen: 546.
29 ENG ENGLISH Product Specication Preset Mode Preset Mode Horizontal Frequency (kHz) V ertical Frequency (Hz) Polarity (H/V) Remark 720 x 400 31.468 70 -/+ 640 x 480 31.469 60 -/- 800 x 600 37.879 60 +/+ 1024 x 768 48.363 60 -/- 1360 x 768 47.712 60 +/+ 1366 x 768 47.
30 ENG ENGLISH Proper Posture PROPER POSTURE Proper posture for using the monitor Adjust the angle so that the screen is slightly lower than your eyes. y Using the monitor for a prolonged period of time can cause eye fatigue. T ake a 10-minute break every hour .
.
Make sur e to read the Saf et y Pr ecautions befor e using the product . Keep the Ow ner's Manual(CD ) in an accessible place for f uture ref erence. The model and serial number of the SET is located on the back and one side of the SET . R ecord it below should you ever need service.
An important point after buying a device LG Electronics N225WU (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought LG Electronics N225WU yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data LG Electronics N225WU - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, LG Electronics N225WU you will learn all the available features of the product, as well as information on its operation. The information that you get LG Electronics N225WU will certainly help you make a decision on the purchase.
If you already are a holder of LG Electronics N225WU, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime LG Electronics N225WU.
However, one of the most important roles played by the user manual is to help in solving problems with LG Electronics N225WU. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device LG Electronics N225WU along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
