Instruction/ maintenance manual of the product MT-60PZ12V/A/B/K/S, MT-60PZ14V/A/B/K/S, MZ-60PZ14V/A/B/K/S LG Electronics
Go to page of 59
PLASMA MONIT OR ON/OFF INPUT SELECT VOLUME P/NO : 3828V A0373E (NP00KB, 067M TX, 373-026H) PLASMA MONIT OR Please read this owner ’s manual carefully before operating the Monitor . Retain it for future reference. Record model number and serial number of the Monitor .
ON/OFF INPUT SELECT VOLUME The explanation about noise of 60" PDP In the same way that a fan is used in a PC to keep the CPU cool, the PDP is equipped with cooling fans to improve the reliability of this product. Therefore, a certain level of noise could occur when the fan is oper - ated.
ENGLISH After reading this manual, keep it in the place where the user can always contact easily . Contents First step Safety Instructions ....................................................4 Monitor Overview Controls of the Monitor .................
4 Safety Instructions - It is recommended that this product only be used at an altitude of less than 6562 feet (2000m) to get the best quality picture and sound. WARNING NOTES Do not place the Monitor in direct sunlight or near heat sources such as heat registers, stove and so on.
5 ENGLISH Do not place the Monitor in a built-in installation such as a bookcase or rack. - V entilation required. NOTES Do not pull the cord but the plug when unplugging. - This may cause a fire. Ensure the power cord doesn’t trail across any hot objects like a heater .
6 Safety Instructions WARNING Do not placing any- thing containing liquid on top of the Monitor . - This may cause a fire or could give an electric shock. Do not insert any object into the exhaust vent. - This may cause a fire or could give an electric shock.
7 ENGLISH Dispose of used batteries carefully to protect a child from eating them. - In case that it eats them, take it to see a doctor immediately . NOTES When moving the Monitor assembled with speakers do not carry holding the speak- ers.
8 Controls of the Monitor ON/OFF ON/OFF INPUT SELECT VOLUME INPUT SELECT VOLUME <Front Panel Controls> Main power button INPUT SELECT button Sub power button VOLUME ( F F , G G ) buttons Power s.
9 ENGLISH AUDIO (MONO) R L VIDEO Y P B R P AV INPUT AUDIO R L L (+) ( ) (+) ( ) R EXTERNAL SPEAKER (8 Ω ) AC INPUT AUDIO INPUT RS-232C S-VIDEO COMPONENT(480i/480p) RGB-PC INPUT (VGA/SVGA/XGA/SXGA) (.
10 Accessories D-sub 15 pin cable T ilt wall mounting bracket W all mounting bracket V ertical Wall mounting bracket AS mark LG TV Owner ’ s Manual 1.
11 ENGLISH Optional Extras Ceiling mounting bracket Floor type stand Desktop stand Speakers Speaker stand Floor type speaker stand V ideo cables Audio cables - Optional extras can be changed or modified for quality improvement without any notification new optional extras can be added.
12 Controls of the remote control - When using the remote control aim it at the remote control sensor of the Monitor . POWER SLEEP INPUT SELECT PSM SSM ARC STILL PIP / TWIN PICTURE PIP INPUT MENU MUTE OK VOL POWER STOP PLA Y FF REC REW P/STILL VOL POSITION POWER SLEEP (Refer to p.
13 ENGLISH INPUT SELECT SSM (Refer to p.41) STILL (Refer to p.43) POSITION (Refer to p.27) D D / E E selects a menu item. MUTE switches the sound on or off. TWIN PICTURE (Refer to p.29) INPUT SELECT button on the remote control Each press of this button changes the mode as shown below .
14 Monitor Installation - This model can be installed on a wall as shown below . W all mount is optional, and is not supplied with the monitor . - This plasma display is designed to be mounted horizontally or vertically . W all Mount: Horizontal Installation • The monitor can be installed on the wall as the picture above.
15 ENGLISH W all Mount: V ertical Installation • The monitor can be installed vertically on the wall as shown above. Caution: When installing the monitor vertically , the front panel controls must be in the left- down side position as shown above.
16 W atching VCR (+) ( ) (+) ( ) AUDIO (MONO) R L VIDEO Y P B R P AV INPUT AUDIO R L R L EXTERNAL SPEAKER (8 Ω ) AC INPUT AUDIO INPUT RS-232C S-VIDEO COMPONENT(480i/480p) RGB-PC INPUT (VGA/SVGA/XGA/.
17 ENGLISH W atching Cable TV - After subscribing to a cable TV service from a local provider and installing a converter , you can watch cable TV programming.
18 (+) ( ) (+) ( ) AUDIO (MONO) R L VIDEO Y P B R P AV INPUT AUDIO R L R L EXTERNAL SPEAKER (8 Ω ) AC INPUT AUDIO INPUT S-VIDEO COMPONENT(480i/480p) RGB-PC INPUT (VGA/SVGA/XGA/SXGA) (DVD INPUT) RS-2.
19 ENGLISH W atching DVD • Connect DVD video inputs to Y , P B , P R of COMPONENT (480i/480p) (DVD INPUT) and audio inputs to Audio sockets of A V INPUT . How to connect How to use • Press INPUT SELECT button on the remote control of the monitor to select COMPONENT .
INPUT SELECT On the remote control How to use (+) ( ) (+) ( ) AUDIO (MONO) R L VIDEO Y P B R P AV INPUT AUDIO R L R L EXTERNAL SPEAKER (8 Ω ) AC INPUT AUDIO INPUT S-VIDEO COMPONENT(480i/480p) RGB-PC.
21 ENGLISH Monitor Image Display Specifications 640x350 720x400 31.468 70.09 37.861 85.08 31.469 70.08 37.927 85.03 31.469 59.94 35.000 66.66 37.861 72.80 37.500 75.00 43.269 85.00 45.913 90.03 53.01 1 100.04 64.062 120.00 35.156 56.25 37.879 60.31 48.
22 3 2 Function checking in PC mode - Select RGB input source. - PIP/DW function is worked when the interface board is installed. Interface board (AP-60EA21) is not equipped on MT/Z-60PZ14 series models. 1 Press the MENU button. Press the G button and then press the D / E or F / G button to select a function you want to use.
23 ENGLISH 1 3 Adjusting in PC mode Press the D / E button to select SCREEN and then press the G button. If picture needs to be adjusted more after Auto adjustment, you can manually adjust the image position and PHASE . - Select RGB input source - Automatically adjusts picture position and eliminates any image shaking.
24 Adjusting in PC mode 3 2 1 Press the D / E button to select SCREEN and then press the G button. Adjusting horizontal / vertical position READY Press the D / E button to select V -POSITION or H-POSITION and then press the G button. • The adjustment range of V -POSITION is -50 ~ +50.
25 ENGLISH 3 2 1 Press the D / E button to select SCREEN and then press the G button. Adjusting phase READY - If the picture isn’t clear after auto adjustment and especially that characters are still trem- bling, then adjust the picture phase manually .
26 PIP function - Select RGB input source before pressing PIP - This function works only when the interface board is installed. Interface board (AP-60EA21) is not equipped on MT/Z-60PZ14 series models.
27 ENGLISH POSITION Moving the Sub picture Press the POSITION button in PIP mode. • Each press of the POSITION button will change the position of the sub picture on the screen as shown below . PIP INPUT Selecting the input signal Press the PIP INPUT button in PIP mode.
28 Selecting PIP sound options 3 2 1 Press the D / E button to select PIP / DW and then press the G button. READY Press the D / E button to select SOUND SELECT and then press the G button. Press the D / E button to select SOUND [ M ] or SOUND [ S ] and then press the OK button.
29 ENGLISH T win picture mode / TWIN PICTURE Press the ✱ /TWIN PICTURE button. • Each time you press ✱ / TWIN PICTURE or F / G button, you can select ON or OFF . <ON> <OFF> DW DW F OFF G F ON G • T o avoid showing a fixed image on the screen, sub picture moves every 2 hours.
30 T win picture mode PIP INPUT Selecting a source for the T win picture Press the PIP INPUT button in TWIN PICTURE mode. • Each time you press PIP INPUT button, you toggle VIDEO , S-VIDEO and COMPONENT . COMPONENT source only works with 480i signal input.
31 ENGLISH Using the remote control Inserting batteries • Open the battery compartment cover on the back side and insert the batteries with correct polarity . • Apply two 1.5V alkaline batteries of AAA type. Don’t mix the used batteries with new batteries.
32 T urning on the Monitor 3 2 1 2 1 - When using the remote control, aim it at its sensor on the Monitor . T urning on the Monitor just after installation T urning on the Monitor (power cord is still connected) Connect power cord correctly . Press the ON/OFF button on the Monitor .
33 ENGLISH Menu Rotation for V ertical V iewing 3 2 1 READY Press the D / E button to select OSD ROT A TE and then press the G button. Use the D / E button to select NOR- MAL or ROT A TE . • Select NORMAL if the monitor was installed horizontally . • Select ROT A TE if the monitor was installed vertically .
34 1 3 2 Press the MENU button. Press the D / E button. • Each time you press this button you can see menus shown below . MENU Function checking Press the G button and then press the D / E or F / G button to select a function you want to use. • Press the OK button to exit.
35 ENGLISH Setting sleep time Sleep T imer turns the Monitor off after a preset time Press the SLEEP button to set sleep time. Each time you press SLEEP button, the next preset setting time is changed as shown below . • T o release sleep time setting, press the SLEEP or F / G button repeatedly to select F --- G .
36 2 1 PSM PSM (Picture Status Memory) Press the PSM button. Press the PSM or F / G button to select your desired picture condition. • Each press of F / G button changes the screen display as shown below . • Y ou can also select DYNAMIC , MILD or USER in the PIC- TURE menu.
37 ENGLISH 2 1 READY Use the D / E button to select CON - TRAST and then press the G but ton. (to adjust contrast setting) • Adjust BRIGHTNESS , COLOUR , TINT , and SHARPNESS in the same way . OK VOL VOL Press the MENU button and then press the D / E button to select menu.
38 DRP (Digital Reality Picture) DRP allows you to select Clear or Soft for your picture appearance. 3 1 READY Press the D / E button to select DRP and then press the G button. Press the OK button. OK Press the MENU button and then press the D / E button to select menu.
39 ENGLISH Selecting menu options 3 2 1 READY Use the D / E button to select SCREEN and then press the G button. Use the D / E button to select TV or V CR . • Select the V CR option if watching a VCR. • Select the TV option for other equipment.(Except VCR) • Each time you press the D / E button you toggle between TV and V CR .
40 Adjusting sound 2 1 READY Use the D / E button to select TRE- BLE and then press the G button. (if adjusting treble) • Adjust BASS and BALANCE in the same way . Use the F / G button to make appro- priate adjustment and then press the OK button. • Press the D / E button to select other options.
41 ENGLISH Auto sound control SSM • This function lets you enjoy the best sound without any special adjust- ment because the Monitor automatically selects the appropriate sound option based on the program content. 1 SSM Press the SSM button. 2 Press the SSM or F / G button to select your desired sound.
42 A VL (Auto V olume Leveler) This feature maintains an equal volume level; even if you change channels. 3 1 READY Press the D / E button to select A VL and then press the G button. Press the OK button. OK Press the MENU button and then press the D / E button to select menu.
43 ENGLISH Using Still function 1 2 STILL Press the STILL button. • Y ou can still the current picture. • The sub picture is stilled in PIP or T win picture mode. <Moving image> <Still image> T o return to normal viewing, press the STILL button again.
44 Adjusting OSD T ransparency 3 2 1 READY Press the D / E button to select TRANSP ARENCY and then press the G button. Press the F / G button to adjust OSD transparency . • The adjustment range of TRANSP ARENCY is 0 ~ 5. Press the OK button. OK Press the MENU button and then press the D / E button to select menu.
45 ENGLISH Adjusting colour temperature 3 2 1 READY Press the D / E button to select COLOUR TEMP . and then press the G button. Press the D / E button to select RED and then press the G button. (to adjust RED setting) Use the F / G button to make appropriate adjustments and then press the OK button.
46 Setting picture format ARC Press the ARC button to select a desired picture format. • Y ou can also select 16:9 , 4:3 or ZOOM in the SPECIAL menu.
47 ENGLISH External Control Device Setup - Connect the RS-232C input jack to an external control device (such as a computer or an A/V control system) and control the Monitor ’ s functions externally .
48 T ype of connector : D-Sub 9-pin male * Use a null modem cable. Wire the 7-Wire cable so that each pair of data lines cross between the two devices. These data line pairs are RXD (Receive data) and TXD (T ransmit data), DTR (DTE side ready) and DSR (DCE side ready), and RTS (Ready to send) and CTS (Clear to send).
ENGLISH 49 RS-232C configurations 2 3 5 4 6 7 8 RXD TXD GND DTR DSR RTS CTS TXD RXD GND DSR DTR CTS RTS PC 7-wire configuration (Standard RS-232C cable) DB 9 Control line 3 2 5 6 4 8 7 PDP DB 9 2 3 5 .
50 1 Use the D / E buttons to select SET ID and then press the G button. • Use this function to specify a monitor ID number . Set ID READY 2 Use the F / G button to adjust SET ID to choose the desired monitor ID number . • The adjustment range of SET ID is 1 ~ 99.
ENGLISH 51 Communication Parameters Command Reference List - The RS-232C input jack is used to control the Monitor’s functions using an external control device.
52 External Control Device Adjustments 01. Power (Command:p) G T o control Power On/Off of the Monitor . T ransmission Data 0 : Power Off 1 : Power On * Example : Power on for set ID No.3. T ype : P 3 1 ‘0x0D’ [p][ ][Set ID][ ][Data][Cr] Acknowledgement Data 0 : Power Off 1 : Power On * In example : Monitor Acknowledges power on for set ID No.
ENGLISH 53 * Real data mapping 0 : Step 0 A : Step 10 F : Step 15 10 : Step 16 64 : Step 100 06. V olume control (Command:v) G T o adjust volume. Y ou can also adjust volume with the volume buttons on remote control. T ransmission Data Min : 0 ~ Max : 64 * Refer to ‘Real data mapping’ as shown below .
54 12. OSD select (Command:d) G T o select OSD (On Screen Display) on/off. T ransmission * The remote control and Monitor front panel controls (except main power) are not operable when the Monitor is set up to be controlled by the PC computer . * This function is “read only”.
ENGLISH 55 * COMPONENT source only works in 480i input signal. 16. PIP sound select (Command:u) G T o select main or sub (inset) sound for PIP/T win picture.
56 IR CODE (NEC Format) G Connect your wired remote control to remote control jack of the monitor . Set the CONTROL LOCK ‘ON’ on the monitor back panel to work wired remote control. Remote Control IR Code (NEC Format) How T o Connect G Output waveform Single pulse, modulated with 37.
57 ENGLISH IR CODE (NEC Format) UP ( D ) DOWN ( E ) VOL+ ( G ) VOL- ( F ) POWER POWER ON SYSTEM OFF MUTE INPUT SELECT RGB VIDEO S-VIDEO COMPONENT SLEEP OK ( ç ) MENU SSM PSM PIP (PIP) INPUT SELECT (P.
58 No output from one of the speakers • Adjust BALANCE in the SOUND menu. (Refer to p.40) Strange sound from the Monitor • T ypical sound due to normal Monitor operation, Monitor is not faulty . T roubleshooting check list No picture & No sound • Check whether the Monitor is turned on.
59 ENGLISH Product specifications MODEL W idth (inches / mm) Height (inches / mm) Depth (inches / mm) Weight (pounds / kg) Power requirement Resolution Colour T emperature Humidity MT -60PZ12V /A/B/K/S MT -60PZ14V /A/B/K/S MZ-60PZ14V/A/B/K/S 57.3 / 1455 34.
An important point after buying a device LG Electronics MT-60PZ12V/A/B/K/S, MT-60PZ14V/A/B/K/S, MZ-60PZ14V/A/B/K/S (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought LG Electronics MT-60PZ12V/A/B/K/S, MT-60PZ14V/A/B/K/S, MZ-60PZ14V/A/B/K/S yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data LG Electronics MT-60PZ12V/A/B/K/S, MT-60PZ14V/A/B/K/S, MZ-60PZ14V/A/B/K/S - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, LG Electronics MT-60PZ12V/A/B/K/S, MT-60PZ14V/A/B/K/S, MZ-60PZ14V/A/B/K/S you will learn all the available features of the product, as well as information on its operation. The information that you get LG Electronics MT-60PZ12V/A/B/K/S, MT-60PZ14V/A/B/K/S, MZ-60PZ14V/A/B/K/S will certainly help you make a decision on the purchase.
If you already are a holder of LG Electronics MT-60PZ12V/A/B/K/S, MT-60PZ14V/A/B/K/S, MZ-60PZ14V/A/B/K/S, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime LG Electronics MT-60PZ12V/A/B/K/S, MT-60PZ14V/A/B/K/S, MZ-60PZ14V/A/B/K/S.
However, one of the most important roles played by the user manual is to help in solving problems with LG Electronics MT-60PZ12V/A/B/K/S, MT-60PZ14V/A/B/K/S, MZ-60PZ14V/A/B/K/S. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device LG Electronics MT-60PZ12V/A/B/K/S, MT-60PZ14V/A/B/K/S, MZ-60PZ14V/A/B/K/S along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
