Instruction/ maintenance manual of the product M197WA LG Electronics
Go to page of 37
M ake sure to read the Safety Precautions before using the product. Keep the User's Guide(CD) in an accessible place for furture reference. S ee the label attached on the product and give the information to your dealer when you ask for service.
1 Before Connecting to the PC Stand Installation Before setting up the pr oduct, ensur e that the power supply , the computer system, and other attached devices is turned off. 1 2 3 Carefully place the product screen side down on a cushioned surface that will protect product and screen from damage.
2 Before Connecting to the PC Detaching Stand Before setting up the pr oduct, ensur e that the power supply , the computer system, and other attached devices is turned off. 1 2 3 Place the set screen side down on a cushion or soft cloth. Detach the monitor to the Stand Base by turning the screw to the left.
3 Before Connecting to the PC Before setting up the pr oduct, ensur e that the power supply , the computer system, and other attached devices is turned off. Positioning your display 1. Adjust the position of the panel in various ways for maximum comfort.
4 Before Connecting to the PC W ALL MOUNT :HORIZONT AL INST ALLA TION For proper ventilation,allow a clearance of 4 inches on each side and from the wall. Detailed installation instructions are available from your dealer,see the optional Tilt Wall Mounting Bracket Installation and Setup Guide.
5 Name and Function of the Parts Name of the Remote Control Buttons POWER INPUT PR PR OK MUTE LIST Q.VIEW SSM PSM VOL VOL I/II TV/PC 1. Take out the battery cap. 2. Insert the batteries with correct polarity (+/-). 3. Close the battery cap. • Dispose of used batteries in the recycle bin to prevent environmental pollution.
6 I/II : Bilingual choice and sound mode selection [TV] To switch from Stereo to Mono sound in case of stereo transmission, or from Nicam Stereo to Nicam Mono , in case of digital transmission. to switch from Nicam Dual I to Nicam Dual II or Nicam Dual I+II in case of Nicam Dual transmission.
7 Name and Function of the Parts Name of the Remote Control Buttons PR PR OK MENU SLEEP * VOL VOL ARC/ * PR ( ) Buttons Able to change channel. VOL ( ) Buttons Able to adjust sound. OK Button Use when functional adjustment is completed. Double press the OK button, then Auto Config.
8 HOLD Press the button to stop the automatically rotating of the sub pages. Press the button again to continue the automatic rotating again. SIZE Press the button repeatedly to display the upper part, the lower part and then to return to the normal page size.
9 REVEAL Press the button to reveal/conceal the hidden information, such as solutions to riddles and puzzles. Press this button again to remove the information from the display. INDEX To display the main index. MODE The mode will be switched in the Teletext mode.
10 Name and Function of the Parts Rear View AC IN AC IN AUDIO IN (RGB/DVI) VIDEO COMPONENT IN A V IN VIDEO AUDIO (MONO) S-VIDEO AUDIO Y P B P R L R DVI-D IN (PC) HDMI IN AC IN ANTENNA/ CABLE IN L R RGB IN (PC) AC IN Power Connector : Connect the power cord.
11 Name and Function of the Parts A V Input T erminal VIDEO AUDIO (MONO) S-VIDEO AC IN L R AC IN Audio Input Terminal Video Input Terminal S-Video Input Terminal.
12 AUDIO IN (RGB/DVI) DVI-D IN (PC) 12 Connecting to your PC First of all, see if the computer, product and the peripherals are turned off. Then, connect the signal input cable.
13 • Directly connect to a grounded power outlet on the wall or a power bar with a ground wire. Note Turn on the PC. 2 1 Rear side of the product. Connect the power cord. Select an input signal. Press the INPUT b ut t o n o n t h e r emote control to select the input signal.
14 Connecting to External Devices When using the RCA cable. • Connect the input terminal with a proper colour match. When u s i n g t h e S-Video cable.
15 Select an input signal. Press the INPUT b ut t o n o n t h e r emote control to select the input signal. Or, press the I NPUT bu tt o n a t t h e to p s id e o f t h e product. When connecting with a RCA cable. • Select AV When connecting with a S-Video cable.
16 Connecting to External Devices COMPONENT IN VIDEO AUDIO Y P B P R L R AUDIO COMPONENT IN VIDEO Y Pb Pr L R Rear side of the Product Component Cable (Not included) Connect the video/audio cable as shown in the figure below and then connect the power cord (See page 13).
17 Connecting to External Devices Connect the HDMI cable as shown in the below figure and then connect the power cord. (see page 13) When watching HDMI from the DVD/Set-top Box Select an input signal. Press the INPUT b ut t o n o n t h e r emote control to select the input signal.
18 Rear Side of the Product Antenna Cable (Not included.) Check if the antenna cable is connected at the rear side of the product and then, connect the power cord. When W atching TV Select an input signal. Press the INPUT b ut t o n o n t h e r emote control to select the input signal.
19 T o arrange cables using cable management 1. Tie cables together with a cable management as shown in the illustration. Cable management.
20 Name of the Buttons in the Screen Adjustment Unit • Adjust the volume. • Use this button to control the channel for the TV signal. • Use this button to select an icon or adjust the setting in the OSD screen. OSD Select/Adjust Button Adjusting the Screen Volume 30 • Use this button to turn the product on and off.
21 Adjusting the Screen Name of the Buttons in the Screen Adjustment Unit TV Television AV CVBS, S-Video Component HDTV, DVD RGB D-Sub analog signal DVI DVI Digital signal HDMI HDMI Digital signal INP.
22 O SD(On Screen Disp lay) The OSD function enables you to adjust the screen status conveniently since it provides graphical presentation. Note OSD (On Screen Display) Menu Icon Function Description Station Picture Sound Time Adjusting the time function.
23 Adjusting the Screen OSD (On Screen Display) Scree n T racking Order Press the MENU Button, then the main menu of the OSD will appear. To access a control, use the Buttons. When the icon you want becomes highlighted, press the OK Button. Use the Buttons to adjust the item to the desired level.
24 It should be set before run auto searching. Press the buttons to select the TV system of the country or part of the world from where you want to receive the TV channels. * Supporting channel : C(V/UHF 02~69) S(Cable 01~41) BG : PAL B/G, SECAM B/G (Europe/East Europe) I : PAL I/II (U.
25 Adjusting the Screen ST A TION ID set/Select the channel when using the TV Press the buttons to select a TV channel to be deleted. -> Press the red key on the remote control -> The background colour of the selected channel will change to red.
26 ST A TION ID set/Select the channel when using the TV Favourite programme This function lets you select your favourite programmes directly. (8 channel) Press the buttons to select a channel. * Yellow key (remote control) : Favourite Program On : Rotate favourite channel Favourite Program Off : To display the previously selected TV channel.
27 Adjusting the Screen PICTURE ID adjust the picture function(RGB/DVI) PSM The PSM function automatically adjusts the screen image quality. • Dynamic Select this option to display with a sharp image. • Standard The most general and natural screen display status.
28 PSM CSM The PSM function automatically adjusts the screen image quality. • Dynamic Select this option to display with a sharp image. • Standard The most general and natural screen display status. • Mild Select this option to display with a mild image.
29 Adjusting the Screen SSM AVL Balance SOUND ID to adjust the sound function The best sound tone quality will be selected automatically depending on the video type that you're currently watching. • Flat : The most commanding and natural audio.
30 TIME ID to adjust the time function • In the event of power interruption (disconnection or power failure), the Clock must be reset. • Two hours after the set is switched on by the On time function it will automatically switch back to off mode unless a button has been pressed.
31 Use the buttons to select On or Off . It can be set up so that it can only be used with the remote control. This feature can prevent unauthorized viewing. In order to lock the OSD screen adjustment, set the Child lock tab to the ' On ' position.
32 SCREEN ID to adjust the screen function Auto config. Manual config. ARC Reset Resolution This button is for the automatic adjustment of the screen Position , Clock and Phase . (It is not working in DVI.) This button is for the manual adjustment of the screen Position , Clock and Phase .
33 T roubleshooting • Install the product driver, which is provided with the product, or download it from the web site. (http://www.lge.com) • See if the plug&play function is supported by referring to the video card user's guide. ● Did you install the driver? 'Unknown Product' message appears when the product is connected.
34 • If you use a fixed image for a long time, the pixels may be damaged quickly. Use the screen saver function. ● After-image appears when the product is turned off.
35 • Set the colour resolution to more than 24 bits (true colour) Select Control Panel – Display – Settings – Colour Table menu in Windows. • Check the connection status of the signal cable.
36 Power Indicator Mode Product On Mode Sleep Mode Off Mode Blue Amber Off Specifications The product specifications can change without prior notice for product improvement. Screen Type 18.51 inches Wide (47.01 cm) TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel Visible diagonal size: 47.
An important point after buying a device LG Electronics M197WA (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought LG Electronics M197WA yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data LG Electronics M197WA - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, LG Electronics M197WA you will learn all the available features of the product, as well as information on its operation. The information that you get LG Electronics M197WA will certainly help you make a decision on the purchase.
If you already are a holder of LG Electronics M197WA, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime LG Electronics M197WA.
However, one of the most important roles played by the user manual is to help in solving problems with LG Electronics M197WA. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device LG Electronics M197WA along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
