Instruction/ maintenance manual of the product CWL-6200 LG Electronics
Go to page of 15
CopyWriter Live CWL-6200 Audio Disc Recorder Instruction Manual Microboards Technology LLC 8150 Mallory Court Chanhassen, MN 55317 Version 2.3 www.microboards.
Microboards CopyWriter Live 2.
Microboards CopyWriter Live 3 Table of Contents Introduction ....................................................................................................................... 5 What’s Included: .................................................
Microboards CopyWriter Live 4 Important Safety Instructions • Read the User’s Manual completely • Observe all warnings • Do not connect or disconnect the power cord when your hands are wet • Keep unit and power cord aware from a ny heat source, such as radiators, stoves, or heat registers.
Microboards CopyWriter Live 5 Introduction The CopyWriter Live combines the flexibility of cassette tapes with the quality and longevity of CDs, in one low-cost, easy to use unit. You can record from practically any au dio source, including live feed fro m a microphone, a cassette deck, a mixer and many ot hers.
Microboards CopyWriter Live 6 Controls 1) Left CD Recorder Drive 2) Eject for Left CD Recorder Drive 3) Right CD Recorder Drive 4) Eject for Right CD Recorder drive 5) Power Button 6) Disc Change Butt.
Microboards CopyWriter Live 7 Connections Important Note : Make sure the power is turned off to the CopyWriter Live system when connecting or disconnecting any cables. Back Panel: XLR, RCA Out put, RCA Input 1, and Power Input connections can be made to the XLR c onnection on the back, or to the RCA Input 1 connection.
Microboards CopyWriter Live 8 Rack Mount Installation To mount the rack mount brackets on your CopyW riter Live system, please follow these steps: 1) If you system is turned on, turn off power a nd unplug the power cord from the back of the system. 2) Turn the system over and remove the four f eet from the bottom of the CopyWriter Live.
Microboards CopyWriter Live 9 If your audio source volume is too low, the m eter may show little or no activity. In that case, you should increase your input volume by pressing the Vol Up button.
Microboards CopyWriter Live 10 Copying a Disc To copy a disc, all you need to do is place a blank disc in one drive and the master disc in the other drive. It does not matter which drive contains the master and whic h drive contains the blank. Press the Disc Copy button on the CopyWriter Live front panel and the copy pro cess will begin.
Microboards CopyWriter Live 11 In order for a recorded disc to play back correctly in other players, the disc must be closed. If you press Stop to stop your recoding, then the disc is cl osed and can be played on other playback devices. If you press Pause while recording a disc, r ecording will stop , but the disc is not closed.
Microboards CopyWriter Live 12 Track Extraction This menu option allows you to extract tracks from one master and burn them to a blank disc. To use this feature, follow the direction s below: 1. Press Yes/Setup at the Track Extraction menu selection in the Setup m enu to begin.
Microboards CopyWriter Live 13 In the Setup menu, press the No button until System Update is sele cted. Press the Yes/Setup button and the left drive will eject, prompting you to place the firmware disc in the drive with the m essage Insert Program Disc .
Microboards CopyWriter Live 14 Troubleshooting Playback is not appearing on the screen. Confirm the RCA connections are correct. No Audio playback Confirm the RCA connections are correct. Check the playback volume and make sure it is not too low. Disc will not play back on other player Confirm the recorded disc is Closed.
Microboards CopyWriter Live 15 Contact Information For technical questions or support issues, c ontact Microboards Technol ogy technical support: United St ates PH: 952-556-1639 FAX: 952-556-1628 support@microbo ards.com www.microboard s.com Europe PH: +44 (0) 845 230 7800 www.
An important point after buying a device LG Electronics CWL-6200 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought LG Electronics CWL-6200 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data LG Electronics CWL-6200 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, LG Electronics CWL-6200 you will learn all the available features of the product, as well as information on its operation. The information that you get LG Electronics CWL-6200 will certainly help you make a decision on the purchase.
If you already are a holder of LG Electronics CWL-6200, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime LG Electronics CWL-6200.
However, one of the most important roles played by the user manual is to help in solving problems with LG Electronics CWL-6200. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device LG Electronics CWL-6200 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
