Instruction/ maintenance manual of the product 32LY770M LG Electronics
Go to page of 102
LG Setup Wizard pages 12 – 13 Custom Master TV Setup pages 46 – 48 Cloning Procedures pages 53 – 58 EXPERIENCED INST ALLER Commercial Mode Setup Guide Note: Selected features shown in this guide may not be available on all models. Hospital Grade Interactive Pro:Centric ® TVs © Copyright 2015 LG Electronics U.
2 206-4271 MODEL and SERIAL NUMBER The model and serial numbers of this TV are located on the back of the cabinet. For future reference, LG suggests that you record those numbers here: Model No._________________ Serial No._______________ W ARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK).
3 206-4271 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water . 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accor- dance with the manufacturer ’ s instructions.
4 206-4271 (Continued from previous page) 22. Outdoor Antenna Grounding If an outside antenna or cable system is connected to the product, follow the precautions below .
5 206-4271 T able of Contents Safety W arnings ..................................... 2 Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . 3 – 4 T able of Contents .................................... 5 Commercial Mode Overview .
6 206-4271 Commercial Mode Overview This document describes how to set up L Y770M Pro:Centric ® TVs for Commercial Mode operation. LG commercial TV functionality is based on “ownership” of the.
7 206-4271 Commercial Mode Overview (Cont.) T ypical Installer Menu TV Setup Menus Installer Menu T o create a Master TV Setup, you will need to know how to access the commercial controller (PTC) Installer Menu and make changes to the default values as required.
8 206-4271 Commercial Mode Overview (Cont.) When the TV CPU is configured with an FTG Channel Map, the CPU controls and restricts the tuning operation of the TV , and when the EBL is configured with an FTG Channel Map, the EBL controls and restricts the tuning operation of the TV .
9 206-4271 Commercial Mode Overview (Cont.) While the TV is in FTG Mode: • Users can still access the Installer Menu using an LG Installer Remote; however , all Installer Menu items will be read-only .
10 206-4271 Pro:Centric Operation Pro:Centric Interactive Menu Features LG’s Pro:Centric application enables patients and visitors to locate and select television entertainment using an interactive channel guide, check the daily weather , and view hospital and surrounding amenities via custom billboards and points-of-interest maps.
11 206-4271 Pro:Centric Operation (Cont.) Pro:Centric Setup Administration and management options for the Pro:Centric server are described in detail in the Pro:Centric Server Admin Client User Guide .
12 206-4271 Note: After it is turned ON, the TV begins an initialization process, and it may take several minutes for the LG Setup Wizard to appear . The LG Setup Wizard, comprising EZ-Manager Wizard .
13 206-4271 LG Setup Wizard (Cont.) Initiate Conguration or Exit the LG Setup Wizard The Welcome screen provides a brief introduction to the LG Setup Wizard . WELCOM E TO LG’S SETUP WIZARD EXIT This wizard features two dierent setup options: .
14 206-4271 EZ-Manager Wizard Initiate the EZ-Manager Wizard After you select the “EZ-Manager” option from the Setup Wizard Welcome screen, an EZ-Manager Welcome screen provides a brief introduction to the EZ-Manager Wizard. Note: Each EZ-Manager Wizard step is allotted a time frame after which the wizard proceeds without user interaction.
15 206-4271 EZ-Manager Wizard (Cont.) EZ-Manager Wizard (Cont.) TV Conguration Options From the TV Conguration Options screen, you can choose how to proceed with the conguration of this TV (assuming you do not opt to exit the wizard, which you may also do at any time).
16 206-4271 EZ-Manager Wizard (Cont.) Note: Zoning features are only applicable for TVs that will be congured using a TLX le (local or remote conguration).
17 206-4271 EZ-Manager Wizard (Cont.) Congure Pro:Centric Settings Once you select “ NEXT ” from the TV Conguration Options screen, the Searching for Pro:Centric Server screen is displayed. Note: If any of the conguration steps fails, you will see a “Diagnostics” screen with an indication of the failure.
18 206-4271 (Continued from previous page) If the process is successful, no further user interaction is required, though, in some instances, where the option (for example “NEXT”) is available, you may manually move forward to subsequent steps within the wizard to speed up the process.
19 206-4271 EZ-Manager Wizard (Cont.) Pro:Centric Manual Configuration Screen with RF Media Fields Pro:Centric Manual Configuration Screen with IP Media Fields Manual Pro:Centric Conguration 1.
20 206-4271 * PCS150R and later Pro:Centric servers do not support HRC or IRC cable channel frequencies. (Continued from previous page) 3. Refer to the appropriate subsection below , depending on the Pro:Centric server conguration, to complete the remaining elds.
21 206-4271 EZ-Manager Wizard (Cont.) USB Conguration The TV Manager / USB Download Menu provides options that enable you to download individual conguration or software les to the TV , or you can use the Ez Download utility available from the menu to select and download multiple conguration or software les at one time.
22 206-4271 EZ-Manager Wizard (Cont.) (Continued from previous page) 2. U se the arrow keys on the Installer Remote to select USB CONFIGURA TION , and then press OK . Y ou will be redirected to the TV’ s TV Manager / USB Download Menu (see example below).
23 206-4271 Initiate the Express Script Note: While the Express Script enables you to set up TVs in lieu of cloning, you can also use an Express Script TV Setup for cloning purposes (clone programmer only), if desired. However , note that TV setup menu customization via the Express Script is limited to Channels Menu options.
24 206-4271 Express Script (Cont.) If you wish to proceed with the wizard without changing the default values for the Pro:Centric settings, you can simply select NEXT and press OK on the Installer Remote.
25 206-4271 Express Script (Cont.) (Continued from previous page) 1. In the Pro:Centric Mode eld, use the Left/Right arrow keys on the Installer Remote to select the appropriate Pro:Centric Application Mode—FLASH, GEM, HTML, or CONFIGURA TION ONL Y .
26 206-4271 Express Script (Cont.) Complete the TV Conguration The following procedure describes the remaining steps in the Express Script. Y ou can select the “BACK” button, where available, to check previous settings, as necessary . Note: If you choose to exit the Express Script from this point on, any settings made will not be retained.
27 206-4271 Express Script (Cont.) (Continued from previous page) Note: If an Aux input will not be used, it is advisable to disable it. After the TV setup is transferred to the PTC (see step 7), the only way to remove Aux inputs from the PTC Channel Map, is to go to the Channel Preview/Banks Setup Menu and select Normal-Deleted.
28 206-4271 Express Script (Cont.) (Continued from previous page) Note: Y ou MUST select RUN AUTO TUNING and press OK in order to run the channel scan. If you move on to the next step without running Auto T uning, there will be no analog or digital channels in the channel lineup.
29 206-4271 Express Script (Cont.) (Continued from previous page) Use the arrow keys to navigate between the elds in this screen: • Channel/Input: Edit the channel lineup, as necessary , to include only clear (non-encrypted) channels.
30 206-4271 Express Script (Cont.) (Continued from previous page) Note: It is recommended that you select “NO” to limit access to the channel lineup and prevent end users from accessing channel settings; i.e., the Channels options in the TV setup menus will be inaccessible/grayed out.
31 206-4271 Ez Download Utility The Ez Download utility , available from the TV Manager / USB Download Menu, enables you to select multiple les at one time from the les loaded on a USB memory device.
32 206-4271 (Continued from previous page) 3. If the TV is currently in Pass-through Mode, you would like to transfer (T each) a TLX le to the TV via the Ez Download utility , and you intend to use one or both of the TV’s Zoning feature(s), assign the appropriate TV Zone # and/or Wi-Fi Zone # in the TV at this time.
33 206-4271 Ez Download Utility (Cont.) (Continued from previous page) CANCEL BACK UPDA TE Channel T uning / Channel Banner Display Logical Physical TV SW Version 03.00.33 Update Version 03.00.34 EZ DO WNLO AD TV MANAGER Select USB Memory Device ˇ USB Device 1: Device Name Logo Image ˇ Splash Image 1920 X 1080 ProC.
34 206-4271 Ez Download Utility (Cont.) (Continued from previous page) 9. If a TLX le that includes an FTG Channel Map is selected, a Channel Tuning / Channel Banner Display eld will be displayed at the right of the screen.
35 206-4271 Installer Menu Use the Installer Menu to set up, change, or view operational settings. This section describes how to access, use, and exit the Installer Menu from the TV itself.
36 206-4271 As part of the Installer Menu header (in all modes), two 3-character acronyms are displayed to indicate the TV’s current conguration mode.
37 206-4271 Installer Menu (Cont.) Installer Menu Items 000 through 049 Item Function V alue Range Default V alue Brief Description of Function 000 INST ALLER SEQ 0 ~ 3 0 Leave default set to 0. 001 POWER MANAGE 0 ~ 7 0 Selects the number of hours of inactivity allowed before the TV automatically turns itself OFF .
38 206-4271 Installer Menu Items 053 through 122 Item Function V alue Range Default V alue Brief Description of Function 053 DIS. CH-TIME 0 / 1 0 Set to 1 to disable Channel-Time display . 069 EN. CH-T COL. 0 / 1 1 Set to 1 to enable custom color for the Channel-T ime display .
39 206-4271 Installer Menu (Cont.) 000 - INST ALLER SEQUENCE Species entry sequence to the Installer Menu. 0 = 9876 1 = 4321 2 = 1478 3 = 3698 001 - POWER MANAGE (Power Management) Energy saving feature.
40 206-4271 Installer Menu (Cont.) 008 - MIN VOLUME (Minimum V olume) This function determines the minimum volume level allowable with the V olume (VOL) Up/Down control. In this way , for example, someone cannot set the volume too low to hear . The value range is from 0 to 63.
41 206-4271 Installer Menu (Cont.) 023 - CAPTION LOCK If set to 0, captions are OFF when the TV is turned ON. Set to 1 to use the caption setting congured before the TV was turned OFF when the TV is turned ON.
42 206-4271 041 - SIMPLINK EN Set to 0 to disable the SIMPLINK feature. Set to 1 to enable SIMPLINK functionality (does not enable remote control access to the SIMPLINK Menu).
43 206-4271 078 - UPN MSB (UPN Most Signicant Byte) User programmable number , most signicant byte readable by MPI command. Note: Not linked to serial number . 079 - UPN MSB-1 (UPN Most Signicant Byte-1) User programmable number , most signicant byte-1 readable by MPI command.
44 206-4271 099 - BACK LIGHTING Sets the TV screen brightness at power up. Default setting is 255. • 1 (dimmest picture ) – 100 (brightest picture) Static Back Lighting • 101 (dimmest picture) .
45 206-4271 Installer Menu (Cont.) Note: Pro:Centric application updates are downloaded from the Pro:Centric server to the TV when the TV is turned ON ; however , TV E-Z Installation updates are downloaded to the TV when the TV is turned OFF . While E-Z Installation updates are in progress, it is not possible to turn ON the TV .
46 206-4271 Custom Master TV Setup This section describes how to create a customized Master TV Setup for cloning purposes when the TV is in Pass-through Mode. The Master TV Setup can used to configure either TVs that are to remain in Pass-through Mode or TVs that are to be configured for FTG Mode via CPU.
47 206-4271 Custom Master TV Setup (Cont.) Custom Master TV Setup Procedure 1. T urn ON the TV . The next step depends on whether the LG Setup Wizard appears on the screen when you turn ON the TV : • If the wizard is displayed , the TV is in the required factory default state.
48 206-4271 Custom Master TV Setup (Cont.) (Continued from previous page) 4. Set up TV features. On-screen setup menus control the features of the TV . Press MENU on the Installer Remote to access the TV setup menus, and then set Channel, Picture, Sound, etc.
49 206-4271 Channel Banks Setup Channel Banks Overview Channel Banks enable institution administrators to create tiered channel programming on patient in-room TVs. Each channel bank may offer a custom channel lineup for a pre-determined fee. L Y770M TVs are configured with four channel banks, i.
50 206-4271 Channel Status Options CHANNEL PREVIEW - BANK 1 CH 01 1-001 NORMAL-A DD ED Enter -> Change CC -> VCHIP Menu, Ch. Preview -> Exit • NORMAL-ADDED : The channel will appear in the channel lineup of the currently selected channel bank.
51 206-4271 Channel Banks Setup (Cont.) Inactive TV Setup T o create an inactive TV display on Channel Bank 4: 1. Press CH. BANK on the Installer Remote until Channel Bank 4 is selected, and then press CH. PREVIEW to display the Channel Preview/Banks Setup Menu.
52 206-4271 Date _____________ Installer _____________________________________ Page ___ of ____ Location ______________________________________________________________________ Channel Banks W orksheet.
53 206-4271 Cloning Procedures (Continued on next page) Cloning typically refers to the process of capturing a Master TV Setup and transferring it to a T arget TV . This section describes how to save (Learn) a Master TV Setup and transfer (T each) it to a T arget TV using a USB memory device / TLX le.
54 206-4271 Cloning Procedures (Cont.) (Continued from previous page) 6. Use the Up/Down arrow keys to select Learn From TV (TLX) , and then press OK . CANCEL TV MANAGER USB Download Menu Diagnostics Menu Ez Download Logo Image Download Update TV Software Update PTC Software T each T o TV ( TLX) Learn From TV (TLX) 7.
55 206-4271 Cloning Procedures (Cont.) (Continued from previous page) Learning status will be shown in a pop-up progress banner at the bottom of the Learn From TV (TLX) screen. This process may take a few minutes. Do NOT remove the USB device until Learning is complete.
56 206-4271 (Continued from previous page) • If the TLX le contains an FTG Channel Map that was Learned from a TV , the physical RF channels in the FTG Channel Map have been assigned logical channel numbers (see “Learning Conguration from a Master TV” above).
57 206-4271 (Continued from previous page) 3. If applicable (see also “Before Y ou Begin” above), make sure to assign the appropriate Zone designation(s) in the T arget TV at this time.
58 206-4271 Cloning Procedures (Cont.) (Continued from previous page) • If the TLX le includes an FTG Channel Map with RF channels and Aux inputs only , you can choose the format for the channel tuning/banner display .
59 206-4271 As indicated in the introduction to this document, there are two separate and distinct methods for configuring L Y770M TVs for FTG Mode of operation: one method is to configure the TV CPU for FTG Mode operation, while the other is to configure the TV EBL for FTG Mode operation.
60 206-4271 (Continued from previous page) Note: T o remove an individual item from the FTG Configuration List or the TV Setup Menu List, click on/ highlight the item to be removed, and then click the Remove Item button directly above the applicable “List” window .
61 206-4271 FTG CONFIGURA TION LIST Data to be saved in FTG Configuration (.tlx) file. FTG File Manager Utilities Overview Note: The data referenced in the FTG Conguration List is only a snap- shot of the current FTG Channel Map and FTG Installer Menu settings when copied to the list.
62 206-4271 FTG File Manager Utilities Overview (Cont.) FTG Channel Map Conguration Utility The FTG Channel Map Configuration Utility enables you to create, view , edit, and print a Logical Channel Map. PRINT MAP Click to display a printable FTG Channel Map Report.
63 206-4271 FTG File Manager Utilities Overview (Cont.) DELETE Click to remove highlighted channel from FTG Channel Map. ADD After defining a new Logical Channel, click to add channel to the FTG Channel Map. FTG Channel Map Editor The FTG Channel Map Editor shows a single Logical Channel’s data and the FTG Channel Map.
64 206-4271 FTG File Manager Utilities Overview (Cont.) CONFIGURA TION SETTINGS Select tabs for categories of Installer Menu items to set up TV . FTG Installer Menu Conguration Utility Note: The Pro:Centric tab enables you to set up Pro:Centric-specic parameters.
65 206-4271 IP Environment Setup The IP Environment Menu enables you to set up the network features of the TV . If you intend to create a Master TV Setup for cloning purposes (see Master TV Setup proc.
66 206-4271 * PCS150R and later Pro:Centric servers do not support HRC or IRC cable channel frequencies. (Continued from previous page) RF Conguration a) Select/highlight the Media T ype eld and press OK on the Installer Remote to display the drop-down list of options.
67 206-4271 (Continued from previous page) Pro:Centric Application Mode Conguration Select/highlight the Mode eld and and press OK on the Installer Remote to display the drop-down list of options. Then, use the Up/Down arrow keys to select the appropriate Pro:Centric Application Mode setting— Conguration Only , FLASH , GEM , or HTML .
68 206-4271 IP Environment Setup (Cont.) Conguring a Wired Network Connection Note: If desired, you can congure both wired and wireless connections.
69 206-4271 IP Environment Setup (Cont.) (Continued from previous page) If the network is connected successfully , a “Connected to Internet” message will appear just below the progress display . If the network connection is not successful, the progress display will identify the network element in which the connection failed.
70 206-4271 IP Stream Control If necessary , due to an audio and/or video stream delay , IP Stream Control options enable you to compensate for synchronization irregularities by allowing audio PTS and video PTS of fset modications. This menu also enables you to specify the IGMP version (2 or 3).
71 206-4271 IP Environment Setup (Cont.) MEDIA SHARE Smart Share ENABLE Screen Share DISABLE DMR DISABLE TV Name 409KCAS1Q856 Pro:Centric Network Pre-loaded Apps ^ Media Share Setup Media Share allows you to enable Smart Share ® , Screen Share, and DMR options on this TV .
72 206-4271 IP Environment Setup (Cont.) Pre-loaded Applications This option allows you to select which of the pre-loaded application icons to display in the TV’ s Smart Launcher , which appears along the bottom of the screen.
73 206-4271 Reference: Updating TV/PTC Software using a USB Memory Device This section describes how to update TV (CPU) and/or PTC software using the TV Manager / USB Download Menu “Update TV Software” and/or “Update PTC Software” option(s), respectively , though you may also use the Ez Download utility to update software, if desired.
74 206-4271 (Continued from previous page) 5. In the next screen (Update TV Software or Update PTC Software depending on your selection in step 4): • If more than one USB memory device is currently connected to the TV , be sure to select the USB device that contains the software le you wish to use.
75 206-4271 Reference: Downloading a Splash Screen Image using a USB Memory Device This section describes how to download a splash screen image using the TV Manager / USB Download Menu “Logo Image Download” option, though you may also use the Ez Download utility to download the splash image, if desired.
76 206-4271 (Continued from previous page) 5. In the Logo Image Download screen: • If more than one USB memory device is currently connected to the TV , be sure to select the USB device that contains the image le you wish to use.
77 206-4271 Reference: Power Consumption Settings The following tables assume that Installer Menu item 1 18 POWER SA VINGS is set to 3 (default) and Installer Menu item 099 BACK LIGHTING is set as shown below (default value is 255). Note: V alues are results of controlled experiments under laboratory conditions.
78 206-4271 Reference: TV Aux Input Conguration DIRECT ACCESS T uning * TV ENABLE MPI DA T A Installer Menu Item 046 ST ART AUX SRCE (Start Aux Source) V alue Installer Menu MPI DA T A ST A TUS TYP.
79 206-4271 Reference: b -LAN Setup & Overview A b -LAN enabled head end device, such as an LG FMA-LG101, broadcasts over the RF distribution system to communicate to multiple TVs. When the TV is first installed, it must be turned ON in order for its embedded b -LAN module to receive communication from the head end device.
80 206-4271 Reference: FTG Mode via EBL (Local Conguration) The following steps outline local FTG configuration of individual TV EBLs using a direct PC-to-TV (EBL) connection. Refer to the Free-T o-Guest (FTG) Device Configuration Application User Guide for further information.
81 206-4271 Reference: Auto Input(s) Sensing Feature This section provides detailed settings information for Installer Menu item 042 AUTO INPUTS. Note: When both item 042 AUTO INPUTS and item 041 SIMPLINK EN are enabled in the Installer Menu, HDMI inputs will be detected by SIMPLINK, but the Auto Input(s) Sensing Feature will not function.
82 206-4271 Reference: L Y770M Hospital Operations Hospital Features The following table identies when and how the L Y770M hospital features are supported in three different TV congurations. As indicated in the introduction to this document, LG commercial TV functionality is based on “ownership” of the Channel Map.
83 206-4271 Speaker Selection The following table outlines speaker settings as determined by Installer Menu items 027 HOSPIT AL MODE and 020 FEA TURE LEVEL.
84 206-4271 Reference: Restoring Factory Defaults on the TV(s) This section describes how to restore all factory defaults or just the Installer Menu factory defaults either on a single TV that is currently in Pass-through or FTG Mode or on multiple TVs that are currently in FTG Mode.
85 206-4271 Reference: Using the TV’ s Zoning Features This section describes the TV Zoning and Wi-Fi Zoning features available with the L Y770M model TVs.
86 206-4271 Reference: Using the TV’ s Zoning Features (Cont.) Note: While a channel can be restricted from up to eight Zones, a TV can only ever be in (set for) one Zone. See also the FTG Channel Map Editor overview on page 63. At the same time, keep in mind that the TV Zone designations are not mutually exclusive.
87 206-4271 Reference: Using the TV’ s Zoning Features (Cont.) Using the Wi-Fi Zoning Feature with Cloning Conguration A location-specic Wi-Fi conguration / TLX le may be saved (Learned) from an individual TV as part of a Master TV Setup and then be used during T eaching.
88 206-4271 (Continued from previous page) • Label: Allows you to select a North, South, East, or West text label for this TV . Select/highlight the Label eld and press OK . Then, use the Up/Down arrow keys to select the applicable label. Press OK when you are nished.
89 206-4271 Reference: Using Media Share Features When the TV’ s Smart Share, Screen Share, and DMR options are enabled in the IP Environment / Media Share Menu (see “Accessing the IP Environment .
90 206-4271 Reference: Using Media Share Features (Cont.) (Continued from previous page) 4. When you initially access the Wi-Fi Direct screen, the OFF/ON toggle button at the top right of the screen is selected/highlighted by default. If Wi-Fi Direct is currently OFF , press OK on the Installer Remote to turn Wi-Fi Direct ON.
91 206-4271 PILLOW SPEAKER ANTENNA/ CABLE IN SPEAKER OUT LINE OUT GAME CONTROL / MPI A V IN/AUDIO IN (DVI) LAN RESET RESET UPDA TE PTC SERVICE (SERVICE ONL Y) OPTICAL DIGIT AL AUDIO OUT SERVICE TV -LINK CFG VIDEO L/MONO - A UDIO- R Reference: L Y770M Rear and Side Jack Panels UPDA TE Restricted to software updates.
92 206-4271 Reference: External Stereo Speaker Specications 1 LEFT (T ip) 2 RIGHT (Ring) 3 GROUND (Sleeve) The SPEAKER OUT / LINE OUT 3.5 mm stereo jack on the L Y770M rear panel provides stereo speaker signal outputs (xed speaker , variable speaker , or xed line level [amplier]) for external audio equipment .
93 206-4271 Reference: Installer Remote Control T ypical Key Functions FLASHBK MENU POWER TV LG1 TV LG2 TV Z1 TV Z2 PORTAL INFO GUIDE CH. BANK CH. PREVIEW MUTE TIMER ALARM EXIT CC SAP OK VOL VOL CH CH + + Numbers (0 - 9) & DASH Use to enter a channel or program number .
94 206-4271 Reference: Pro:Centric Pillow Speaker and Patient Remote Options LG Pro:Centric pillow speakers and/or patient remotes are available for purchase (see examples at right). For additional information and/or to purchase a Pro:Centric pillow speaker or patient remote, please contact your LG service representative.
95 206-4271 Reference: Pillow Speaker Setup The pillow speaker will only be functional after the Express Script/Custom Master TV Setup and/or cloning procedures are complete. Note: When Installer Menu item 027 HOSPIT AL MODE is set to 254 (factory default value), there is no power (voltage) supplied to the pillow speaker .
96 206-4271 General Guidelines: Choosing a Location for Installing a VESA Standard Mount T o the right are some examples of VESA standard mounts. Since there are numerous types of stands and mounts available, only a few are shown here. Refer to the instruc- tions provided with the TV stand that will be used to mount the TV .
97 206-4271 T roubleshooting General T roubleshooting (Some Quick and Easy T ips for Resolving Problems) Installation Symptom Possible Cause(s) Possible Solution(s) Cannot direct enter channel number . (TV in Pass-through Mode) Installer Menu item 028 CH.
98 206-4271 T roubleshooting (Cont.) Commercial Mode Check / FTG Operation T roubleshooting TV turned ON? Ye s No Press POWER on Installer Remote. TV is not in Commercial Mode. Call T echnical Support for assistance. TV is in Commercial Mode. No On-screen menu display no longer toggles? Ye s Press MENU repeatedly as if to access the Installer Menu.
99 206-4271 Channel Preview/Banks Setup Menu CHANNEL PREVIEW - BANK 1 CH 01 1-001 NORMAL-A DD E D Enter -> Change CC -> VCHIP Menu, Ch. Preview -> Exit Symptom Possible Cause Possible Solution Cannot change channel status in menu. Channel Access was denied in Express Script.
100 206-4271 Glossary of T erms b -LAN SONIFI Solutions, Inc. proprietary RF communication system used to congure/ control TV via RF distribution system. Channel Lineup Channels set in the TV memory , via Auto T uning/manual editing. Cloning The process of capturing a Master TV Setup and transferring it to a T arget TV using a USB memory device.
101 206-4271 Document Revision History / Open Source Software Notice Document Revision History Date Description January 2015 Revision A: New document January 2015 Revision B: Installer Menu update January 2015 Revision C: T itle page update Product documentation is available online at: www .
206-4271 Revision C © Copyright 2015 LG Electronics U.S.A., Inc. For Customer Support/Service, please call: 1-888-865-3026 www .LGsolutions.com Pro:Idiom is a registered trademark of Zenith Electronics LLC. Pro:Centric and Smart Share are registered trademarks of LG Electronics In c.
An important point after buying a device LG Electronics 32LY770M (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought LG Electronics 32LY770M yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data LG Electronics 32LY770M - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, LG Electronics 32LY770M you will learn all the available features of the product, as well as information on its operation. The information that you get LG Electronics 32LY770M will certainly help you make a decision on the purchase.
If you already are a holder of LG Electronics 32LY770M, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime LG Electronics 32LY770M.
However, one of the most important roles played by the user manual is to help in solving problems with LG Electronics 32LY770M. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device LG Electronics 32LY770M along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
