Instruction/ maintenance manual of the product 20EN33SS LG Electronics
Go to page of 35
www .lg.c om O WNER’S MANU AL LED L CD MONIT OR Please r ead this manual caref ully bef ore operating your se t and retain it for future r efer ence.
W ARNING : This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.
2 ENG ENGLISH T ABLE OF CONTENTS CONTENTS 3 ASSEMBLING AND PREP AR- ING 3 Unpacking 4 Parts and buttons 5 Setting up the Monitor set 5 - Attaching the Stand Base 5 - Detaching the Stand Base 6 - Mount.
3 ENG ENGLISH ASSEMBLING AND PREP ARING ASSEMBLING AND PREP ARING Unpacking Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may diff er from the actual product and accessories.
4 ENG ENGLISH ASSEMBLING AND PREP ARING Parts and buttons Power Indicator y L ig ht in g O n: T u rn ed o n y L ig ht in g O ff : T ur n ed o ff Connection panel (See p.
5 ENG ENGLISH ASSEMBLING AND PREP ARING Attach the Stand Body to the monitor set. Attach the Stand Base . T ighten the screw to the right with a coin. Setting up the Monitor set Attaching the Stand Base 1 Place the Monitor set with the screen side down on a flat and cushioned surface.
6 ENG ENGLISH ASSEMBLING AND PREP ARING Mounting on a table 1 Lift and tilt the Monitor set into its upright position on a table. Leave a 10 cm (minimum) space from the wall for proper ventilation. Using the cable holder 2 Connect the AC-DC Adapter and Power Cord to a wall outlet.
7 ENG ENGLISH ASSEMBLING AND PREP ARING Using the Kensington security system The Kensington security system connector is located at the back of the Monitor set. For more information of installation and using, refer to the manual supplied with the Kensington security system or visit http://www .
8 ENG ENGLISH ASSEMBLING AND PREP ARING Mounting on a wall For proper ventilation, allow a clearance of 10 cm on each side and from the wall. Detailed instructions are available from your dealer , see the optional T ilt Wall Mounting Bracket Installation and Setup Guide.
9 ENG ENGLISH USING THE MONITOR SET USING THE MONIT OR SET Connecting to a PC y Y our Monitor set supports Plug & Play*. *Plug & Play: A PC recognizes a connected device that users connect to a PC and turn on, without device configuration or user intervention.
10 ENG ENGLISH USING THE MONITOR SET y If you turn the Monitor set on while it is cold, the screen may flicker . This is normal. y Some red, green, or blue spots may appear on the screen. This is normal. y "Self Image Setting" Function. This function provides the user with optimal display settings.
11 ENG ENGLISH CUST OMIZING SETTINGS CUST OMIZING SETTINGS 1 Press the desired button on the bottom of the Monitor set. 2 Change the value of the menu item by pressing the buttons on the bottom of the Monitor set. T o return to the upper menu or set other menu items, use the up arrow ( ) button.
12 ENG ENGLISH CUST OMIZING SETTINGS Customizing Settings Menu Settings 1 Press MENU button on the bottom of the Monitor set to display the Menu OSD. 2 Set the options by pressing the ◄ or ► or ▼ buttons. 3 Select the " Next Menu " button to enter the more option settings.
13 ENG ENGLISH CUST OMIZING SETTINGS Picture 1 Press MENU button on the bottom of the Monitor set to display the Menu OSD. 2 Select the " Next Menu " button to enter the more option settings. 3 Enter to Picture by pressing the ▼ button. 4 Set the options by pressing the ◄ or ► or ▼ buttons.
14 ENG ENGLISH CUST OMIZING SETTINGS Color 1 Press MENU button on the bottom of the Monitor set to display the Menu OSD. 2 Select the " Next Menu " button to enter the more option settings. 3 Select Color by pressing the ► button. 4 Enter to Color by pressing the ▼ button.
15 ENG ENGLISH CUST OMIZING SETTINGS Display 1 Press MENU button on the bottom of the Monitor set to display the Menu OSD. 2 Select the " Next Menu " button to enter the more option settings. 3 Select Display by pressing the ► button. 4 Enter to Display by pressing the ▼ button.
16 ENG ENGLISH CUST OMIZING SETTINGS Others 1 Press MENU button on the bottom of the Monitor set to display the Menu OSD. 2 Select the " Next Menu " button to enter the more option settings. 3 Select Others by pressing the ► button. 4 Enter to Others by pressing the ▼ button.
17 ENG ENGLISH CUST OMIZING SETTINGS MY KEY Setting 1 Press MY KEY button on the bottom of the Monitor set to display the MY KEY OSD. 2 Set the options by pressing the ◄or►or▼buttons. 3 Select EXIT to leave the OSD menu. MY KEY Description MY KEY Setting MY KEY is short key .
18 ENG ENGLISH CUST OMIZING SETTINGS FUNC. Setting Picture Mode 1 Press FUNC. button on the bottom of the Monitor set to display the FUNC. OSD. 2 Enter to Picture Mode by pressing the ▼ button. 3 Set the options by pressing the ◄ or ► buttons. 4 Select EXIT to leave the OSD menu.
19 ENG ENGLISH CUST OMIZING SETTINGS SUPER ENERGY SA VING 1 Press FUNC. button on the bottom of the Monitor set to display the FUNC. OSD. 2 Select SUPER ENERGY SA VING by pressing the ► button. 3 Enter to SUPER ENERGY SA VING by pressing the ▼ button.
20 ENG ENGLISH CUST OMIZING SETTINGS NOTE y When monitor goes to power saving mode with pc saving option-> Pressing any button -> OSD appear and user should press dual button -> User can bring back to normal mode. DUAL DISPLA Y 1 Press FUNC. button on the bottom of the Monitor set to display the FUNC.
21 ENG ENGLISH CUST OMIZING SETTINGS Each option is explained below . MY KEY Setting 1 Press FUNC. button on the bottom of the Monitor set to display the FUNC. OSD. 2 Select MY KEY Setting by pressing the ► button. 3 Enter to MY KEY Setting by pressing the ▼ button.
22 ENG ENGLISH SPE CIFICA TIONS TROUBLESHOOTING Check the following before calling for service. No image appears Is the power cord of the display connected? y Check and see if the power cord is connected properly to the power outlet. Is the power indicator light on? y Press the Power button.
23 ENG ENGLISH SPE CIFICA TIONS Display image is incorrect The screen color is mono or abnormal. y Check if the signal cable is properly connected and use a screwdriver to fasten if necessary . y Make sure the video card is properly inserted in the slot.
2 4 ENG ENGLISH SPE CIFICA TIONS Display Screen T ype TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel,Anti-Glare coating 47.0 cm visible diagonal (18.5 inch) Pixel Pitch 0.3 mm x 0.3 mm (Pixel Pitch) Sync Input Horizontal Frequency 30 kHz to 61 kHz (Automatic) V ertical Frequency 56Hz to 75Hz (D-SUB) Input Form Separate Sync.
25 ENG ENGLISH SPE CIFICA TIONS Display Screen T ype TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel,Anti-Glare coating 48.2 cm visible diagonal (19 inch) Pixel Pitch 0.283 mm x 0.283 mm (Pixel Pitch) Sync Input Horizontal Frequency 30 kHz to 71 kHz (Automatic) V ertical Frequency 56Hz to 75Hz (D-SUB) Input Form Separate Sync.
26 ENG ENGLISH SPE CIFICA TIONS Display Screen T ype TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel,Anti-Glare coating 49.4 cm visible diagonal (19.5 inch) Pixel Pitch 0.271 mm x 0.262 mm (Pixel Pitch) Sync Input Horizontal Frequency 30 kHz to 83 kHz (Automatic) V ertical Frequency 56Hz to 75Hz (D-SUB) Input Form Separate Sync.
27 ENG ENGLISH SPE CIFICA TIONS Display Screen T ype TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel,Anti-Glare coating 50.8 cm visible diagonal (20 inch) Pixel Pitch 0.276 mm x 0.276 mm (Pixel Pitch) Sync Input Horizontal Frequency 30 kHz to 83 kHz (Automatic) V ertical Frequency 56Hz to 75Hz (D-SUB) Input Form Separate Sync.
28 ENG ENGLISH SPE CIFICA TIONS SPECIFICA TIONS Display Screen T ype TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel,Anti-Glare coating 54.
29 ENG ENGLISH SPE CIFICA TIONS Display Screen T ype TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel,Anti-Glare coating 58.4 cm visible diagonal (23 inch) Pixel Pitch 0.265 mm x 0.265 mm (Pixel Pitch) Sync Input Horizontal Frequency 30 kHz to 83 kHz (Automatic) V ertical Frequency 56 Hz to 75 Hz (D-SUB) Input Form Separate Sync.
30 ENG ENGLISH SPE CIFICA TIONS Display Screen T ype TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel,Anti-Glare coating 60.0 cm visible diagonal (23.6 inch) Pixel Pitch 0.272 mm x 0.272 mm (Pixel Pitch) Sync Input Horizontal Frequency 30 kHz to 83 kHz (Automatic) V ertical Frequency 56 Hz to 75 Hz (D-SUB) Input Form Separate Sync.
31 ENG ENGLISH SPE CIFICA TIONS Preset Modes (Resolution) 19EN33S Display Modes (Resolution) Horizontal Frequency(kHz) V ertical Frequency(Hz) Polarity(H/V) 720 x 400 31.468 70 -/+ 640 x 480 31.469 60 -/- 640 x 480 37.500 75 -/- 800 x 600 37.879 60 +/+ 800 x 600 46.
32 ENG ENGLISH SPE CIFICA TIONS 22EN33S/23EN33S/24EN33S Display Modes (Resolution) Horizontal Frequency(kHz) V ertical Frequency(Hz) Polarity(H/V) 720 x 400 31.468 70 -/+ 640 x 480 31.469 60 -/- 640 x 480 37.500 75 -/- 800 x 600 37.879 60 +/+ 800 x 600 46.
33 ENG ENGLISH PROPER POSTURE Proper posture for using the Monitor set. PROPER POSTURE Adjust the Monitor set and your posture to allow you to view images at the optimal viewing angle. Place your hands gently on the keyboard, keeping your arms bent at the elbows and horizontally outright.
Mak e sur e to re ad the Saf ety Pr ecau tio ns b ef ore using the p r oduct . K eep the Own er ’s Manua l ( CD) in an acc es sible plac e f or futu re r ef erenc e. The mo del a nd s erial numb er o f the SET is locat ed on the back and one s ide o f the SET .
An important point after buying a device LG Electronics 20EN33SS (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought LG Electronics 20EN33SS yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data LG Electronics 20EN33SS - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, LG Electronics 20EN33SS you will learn all the available features of the product, as well as information on its operation. The information that you get LG Electronics 20EN33SS will certainly help you make a decision on the purchase.
If you already are a holder of LG Electronics 20EN33SS, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime LG Electronics 20EN33SS.
However, one of the most important roles played by the user manual is to help in solving problems with LG Electronics 20EN33SS. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device LG Electronics 20EN33SS along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
