
E320 User Guide



1-The power button is located on the left side of the printer.


1-The operator panel has 6 lights and 1 operator panel button.


1- Load paper with the top of the page pointing down, facing you in the tray as shown. 1- Load paper with the top of the page pointing down, facing you in the tray as shown.

2- From your software application, open the file you want to print. 3- Click File to open the file menu.

4- Click Print to open the printer menu.

5- If necessary, click the pull down menu and select the Lexmark E320 Printer. 5- If necessary, click the pull down menu and select the Lexmark E320 Printer.

5- Verify the correct printer is selected in the dialog box.

6- Click OK to print your document.

Canceling a print job From the printer operator panel 1- If the job you want to cancel is printing and the Ready/Data light is blinking,

Press the reset button for approximately 3 seconds This will reset the printer and cancel the job. From a Windows computer
1- Click Start → Settings → Printers


3- A list of available printers appears. Double-click the printer icon you are using to print the job. 3- A list of available printers appears. Double-click the printer icon you are using to print the job.



Clearing paper jams Clearing paper jams In Hawaii, due to the high humidity, paper can absorb moisture from the air. Moist paper can stick to each other causing paper jams. To avoid paper jams be sure to use fresh, dry paper.
In Hawaii, due to the high humidity, paper can absorb moisture from the air. Moist paper can stick to each other causing paper jams. To avoid paper jams be sure to use fresh, dry paper. If print media jams in the printer, the Paper Jam light prompts you to clear the paper path. If print media jams in the printer, the Paper Jam light prompts you to clear the paper path.


A -Pull the media out of the printer by pulling straight up
Solution-

B -Press the operator panel button B -Press the operator panel button

to resume printing. to resume printing.
2- If the jam occurs inside the printer: 2- If the jam occurs inside the printer:
A- Grasp the finger tabs on both sides of the printer cover and pull toward you. A- Grasp the finger tabs on both sides of the printer cover and pull toward you.


B- Grasp the cartridge handle and pull the print cartridge straight up and then
towards you. B- Grasp the cartridge handle and pull the print cartridge straight up and then
towards you.

C- Set the printer cartridge down carefully.

D- Carefully remove the paper. E- Reinstall the print cartridge and close the cover.

2- If the media is jammed tightly behind the roller, or if you just can’t get a grip on it. 2- If the media is jammed tightly behind the roller, or if you just can’t get a grip on it.

A- Open the front output door by pulling on the center tab B- Pull out the paper.
Owners and our team usually reply within a day — and your question helps the next person too.
Be the first to ask — other owners or our team will answer.