EN
Lexmark logo
Official user manual

Lexmark 748de

107 pages·2.8 MB·Printer·PDF·ENDEFRITNLJA
Lexmark 748de
Table of Contents 51 sections Contents · Introduction · Understanding letters after model numbers · Learning about the printer · … ShowHide
Contentsp.3Introductionp.5Understanding letters after model numbersp.5Learning about the printerp.7Finding information about the printerp.7Printer Control Language (PCL) page formattingp.9Printable areasp.9Supported paper and envelope dimensionsp.10Printer Job Language (PJL)p.12PJL commands informationp.12PostScript (PS) emulationp.13Supported paper sizesp.13PostScript paper tray supportp.14PostScript envelope size supportp.15PostScript envelope tray supportp.16Printer specificationsp.18Airflow requirementp.18Noise emission levelsp.18Electrical specificationsp.19Power requirementsp.20Physical specificationsp.20Clearance requirementsp.21Environmental conditionsp.21Altitude and atmospheric pressure specificationsp.22Appendix A: PCL supportp.23PCL emulation commandsp.23GL/2 commandsp.29Appendix B: PJL supportp.32Common variables for both printer languagesp.32Lexmark-unique PJL variables for both printer languagesp.34Common variables for PostScript emulationp.36Lexmark-unique variables for PostScript emulationp.36Lexmark-unique LRESOURCE variablesp.36Status Readback commandsp.36USTATUS unsolicited status variablesp.37PJL messages for auto-continuable conditionsp.37PJL messages for attendance conditionsp.44PJL messages for paper handlingp.61PJL messages for paper jamsp.65Service errorsp.71Device attendance messagesp.71Lexmark-unique PJL commandsp.71Appendix C: PostScript supportp.74Supplemental operatorsp.74Page device parametersp.77User interpreter parametersp.81System interpreter parametersp.82Devices supportedp.85Device parametersp.87PostScript message keys commandsp.96Indexp.97
Page 1 of the Lexmark 748de user manual — December 2012 www.lexmark.com
Page 1 · click to enlarge
Page 1

C746n, C746dn, C746dtn, C748e, C748de, C748dte, X746de, X748de, X748dte

Technical Reference

December 2012 www.lexmark.com

Page 2 of the Lexmark 748de user manual — Edition notice
Page 2 · click to enlarge
Page 2

Edition notice

The following paragraph does not apply to any country where such provisions are inconsistent with local law: LEXMARK INTERNATIONAL, INC., PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain transactions; therefore, this statement may not apply to you.

This publication could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in later editions. Improvements or changes in the products or the programs described may be made at any time.

References in this publication to products, programs, or services do not imply that the manufacturer intends to make these available in all countries in which it operates. Any reference to a product, program, or service is not intended to state or imply that only that product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any existing intellectual property right may be used instead. Evaluation and verification of operation in conjunction with other products, programs, or services, except those expressly designated by the manufacturer, are the user’s responsibility.

For Lexmark technical support, visit http://support.lexmark.com. For information on supplies and downloads, visit www.lexmark.com. If you don't have access to the Internet, you can contact Lexmark by mail: Lexmark International, Inc. Bldg 004-2/CSC 740 New Circle Road NW Lexington, KY 40550 USA

© 2012 Lexmark International, Inc. All rights reserved.

Trademarks Lexmark and Lexmark with diamond design are trademarks of Lexmark International, Inc., registered in the United States and/or other countries. Mac and the Mac logo are trademarks of Apple Inc., registered in the U.S. and other countries. PCL® is a registered trademark of the Hewlett-Packard Company. All other trademarks are the property of their respective owners.

GOVERNMENT END USERS The Software Program and any related documentation are "Commercial Items," as that term is defined in 48 C.F.R. 2.101, "Computer Software" and "Commercial Computer Software Documentation," as such terms are used in 48 C.F.R. 12.212 or 48 C.F.R. 227.7202, as applicable. Consistent with 48 C.F.R. 12.212 or 48 C.F.R. 227.7202-1 through 227.7207-4, as applicable, the Commercial Computer Software and Commercial Software Documentation are licensed to the U.S. Government end users (a) only as Commercial Items and (b) with only those rights as are granted to all other end users pursuant to the terms and conditions herein.

December 2012

Page 3 of the Lexmark 748de user manual — Table of Contents
Page 3 · Contents
Contents

Contents

Contentsp.3Introductionp.5Understanding letters after model numbersp.5Learning about the printerp.7Finding information about the printerp.7Printer Control Language (PCL) page formattingp.9Printable areasp.9Supported paper and envelope dimensionsp.10Printer Job Language (PJL)p.12PJL commands informationp.12PostScript (PS) emulationp.13Supported paper sizesp.13PostScript paper tray supportp.14PostScript envelope size supportp.15PostScript envelope tray supportp.16Printer specificationsp.18Airflow requirementp.18Noise emission levelsp.18Electrical specificationsp.19Power requirementsp.20Physical specificationsp.20Clearance requirementsp.21Environmental conditionsp.21Altitude and atmospheric pressure specificationsp.22Appendix A: PCL supportp.23PCL emulation commandsp.23GL/2 commandsp.29Appendix B: PJL supportp.32Common variables for both printer languagesp.32Lexmark-unique PJL variables for both printer languagesp.34Common variables for PostScript emulationp.36Lexmark-unique variables for PostScript emulationp.36Lexmark-unique LRESOURCE variablesp.36Status Readback commandsp.36USTATUS unsolicited status variablesp.37PJL messages for auto-continuable conditionsp.37PJL messages for attendance conditionsp.44PJL messages for paper handlingp.61PJL messages for paper jamsp.65Service errorsp.71Device attendance messagesp.71Lexmark-unique PJL commandsp.71Appendix C: PostScript supportp.74Supplemental operatorsp.74Page device parametersp.77User interpreter parametersp.81System interpreter parametersp.82Devices supportedp.85Device parametersp.87PostScript message keys commandsp.96Indexp.97
Page 5 of the Lexmark 748de user manual — Understanding letters after model numbers
Page 5 · click to enlarge
Page 5

Introduction

Overview

This edition of the Technical Reference contains information about the following printers or multifunction printers (MFPs):

C746n C746dn C746dtn C748e C748de C748dte X746de X748de X748dte

Understanding letters after model numbers

Some LexmarkTM printers and MFP options may have one or more letters after the model number to indicate features.

AcronymMeaning dduplex1 deduplex and e-Task (electronic task) touch-screen interface dfeduplex, finisher/stapler, and e-Task touch-screen interface dheduplex, high-capacity drawer, and e-Task touch-screen interface dhnduplex, high-capacity drawer, and network dmeduplex, mailbox, and e-Task touch-screen interface dnduplex and network dnfduplex, network, and finisher/stapler dnw or dwduplex, network, and wireless dtduplex and additional tray2 dteduplex, additional tray2, and e-Task touch-screen interface dtfeduplex, additional tray2, finisher/stapler, and e-Task touch-screen interface dtmeduplex, additional tray2, mailbox, and e-Task touch-screen interface dtnduplex, additional tray2, and network dtpeduplex, additional tray2, finisher with hole punch, and e-Task touch-screen interface dttnduplex, tandem tray module, and network 1 Duplex (two‑sided) printing using an optional duplex unit or an internal duplex unit based on the product 2 The additional tray may be part of a drawer.
Lexmark 748de — Understanding letters after model numbers diagram (page 5)
Fig. 1 · Understanding letters after model numbers

Introduction 5

Page 6 of the Lexmark 748de user manual — Introduction
Page 6 · click to enlarge
Page 6
AcronymMeaning dtseduplex, additional tray2, stacker, and e-Task touch-screen interface dtweduplex, additional tray2, wireless, and e-Task touch-screen interface ee-Task touch-screen interface hdnhard disk, duplex, and network nnetwork nlnetwork light model ninetwork and ImageQuick tnnetwork and additional tray2 1 Duplex (two‑sided) printing using an optional duplex unit or an internal duplex unit based on the product 2 The additional tray may be part of a drawer.

Introduction 6

Page 7 of the Lexmark 748de user manual — Learning about the printer
Page 7 · click to enlarge
Page 7

Learning about the printer 7

Learning about the printer

Finding information about the printer

What are you looking for?Find it here Initial setup instructions: • Connecting the printer • Installing the printer softwareSetup documentation—The setup documentation came with the printer and is also available at http://support.lexmark.com. Additional setup and instructions for using the printer: • Selecting and storing paper and specialty media • Loading paper • Configuring printer settings • Viewing and printing documents and photos • Setting up and using the printer software • Configuring the printer on a network • Caring for and maintaining the printer • Troubleshooting and solving problemsUser's Guide and Quick Reference Guide—The guides may be available on the Software and Documentation CD. For more information, visit http://support.lexmark.com. Instructions for: • Connecting the printer to an Ethernet network • Troubleshooting printer connection problemsNetworking Guide—Open the Software and Documentation CD, and then navigate to: Documentation > User’s Guide and other publications > Networking Guide Help using the printer softwareWindows or Mac Help—Open a printer software program or application, and then click Help. ? Click to view context‑sensitive information. Notes: • Help is automatically installed with the printer software. • The printer software is located in the printer program folder or on the desktop, depending on your operating system.
Page 8 of the Lexmark 748de user manual — Learning about the printer
Page 8 · click to enlarge
Page 8

Learning about the printer 8

What are you looking for?Find it here The latest supplemental information, updates, and customer support: • Documentation • Driver downloads • Live chat support • E‑mail support • Voice supportLexmark Support Web site— http://support.lexmark.com Note: Select your country or region, and then select your product to view the appropriate support site. Support telephone numbers and hours of operation for your country or region can be found on the Support Web site or on the printed warranty that came with your printer. Record the following information (located on the store receipt and at the back of the printer), and have it ready when you contact customer support so that they may serve you faster: • Machine Type number • Serial number • Date purchased • Store where purchased Warranty informationWarranty information varies by country or region: • In the U.S.—See the Statement of Limited Warranty included with this printer, or at http://support.lexmark.com. • In other countries and regions—See the printed warranty that came with your printer.
Page 9 of the Lexmark 748de user manual — Printable areas
Page 9 · click to enlarge
Page 9

Printer Control Language (PCL) page formatting 9

Printer Control Language (PCL) page formatting

For more information on PCL, see the Printer Languages and Interfaces Technical Reference. It contains a complete listing with descriptions of PCL commands.

To determine which PCL commands your printer supports, see “Appendix A: PCL support” on page 23.

Printable areas

The printable areas and logical pages for PCL emulation (both portrait and landscape orientation) are illustrated below. See the legend that follows for definitions of areas A through I.

Legend: APortrait physical page width and landscape physical page length BPortrait physical page length and landscape physical page width CPortrait logical page width DLandscape logical page width EDistance between the side edge of the physical page and the logical page in portrait FDistance between the side edge of the physical page and the logical page in landscape GDistance between the top and bottom edge of the physical page and logical page HDistance between the left and right edge of the physical page and the printable area in portrait, or distance between the top and bottom edge of the physical page and printable area in landscape IDistance between the top and bottom edge of the physical page and the printable area in portrait, or distance between the left and right edge of the physical page and the printable area in landscape
Page 10 of the Lexmark 748de user manual — Supported paper and envelope dimensions
Page 10 · click to enlarge
Page 10

Printer Control Language (PCL) page formatting 10

Supported paper and envelope dimensions

The following table lists the page sizes and print area dimensions for all supported paper and envelope sizes. For more information about the printable areas and logical pages for PCL emulation, see “Printable areas” on page 9.

SelectionPaper/envelope dimensionsDimensions by area (pels)1 Page size parameters2NamemminchesABCDEFGHI Paper 2, 602Letter216 x 2798.5 x 1151006600480063601501200100100 3, 603Legal216 x 3568.5 x 1451008400480081601501200100100 12, 45, 612JIS B5182 x 2577.2 x 10.143006070400058301501200100100 26, 626A4 (198 mm)3210 x 2978.3 x 11.74960701446766778142118080100 26, 626A4 (203 mm)3210 x 2978.3 x 11.7496070144800677880118080100 1, 601Executive184.2 x 266.77.25 x 10.543506300405060601501200100100 13, 613A5148 x 2105.83 x 8.2734964960319647201421180100100 300Oficio (México)215.9 x 340.48.5 x 13.451008040480078001501200100100 4 or 10Folio216 x 3308.5 x 1351007800480075601501200100100 15Statement139.7 x 215.95.5 x 8.533005100300048601501200100100 24A6105 x 1484.13 x 5.8324803496219632601421180100100 101Universal216 x 12198.5 x 4851008400480081601501200100100 Envelope 807 3/4 Envelope98.4 x 190.53.875 x 7.523244500202442601501200100100 1 Pel dimensions are for 600 dpi. 2 Page Size Parameters are explained in the Page Control table in the PCL chapter of the Printer Language and Interfaces Technical Reference. 3 The width of the logical page for A4 paper can be changed from the printer control panel or your application. 4 For the Universal paper size, the area dimensions are listed in pel ranges. 5 Paper ID 99 will be supported for backward compatibility with other Lexmark printers. Paper ID 99 has the same logical paper size as ID 100 (compatible with HP LaserJet 5Si/5SiMx) but is 8 pels wider than the Lexmark 4039. 6 To support two‑sided printing, the Universal paper size length must be between 5.83 inches (148 mm) and 17 inches (431.8 mm); and the width must be between 8.27 inches (210 mm) and 11.69 inches (297 mm). Note: The explanation of the printable area assumes that the Print Area menu item is set to Normal. For more information, see “Print Area Menu Item” in the PCL chapter of the Printer Language and Interfaces Technical Reference.
Page 11 of the Lexmark 748de user manual — Supported paper and envelope dimensions
Page 11 · click to enlarge
Page 11

Printer Control Language (PCL) page formatting 11

SelectionPaper/envelope dimensionsDimensions by area (pels)1 Page size parameters2NamemminchesABCDEFGHI 899 Envelope98.4 x 225.43.875 x 8.87523245324202450841501200100100 8110 Envelope104.8 x 241.34.125 x 9.524745700217454601501200100100 90DL Envelope220 x 1108.66 x 4.3325985196231449601421180100100 91C5 Envelope229 x 1629.02 x 6.3838265408354251721421180100100 995, 100B5 envelope176.0 x 250.06.93 x 9.8441565904387256681421180100100 1 Pel dimensions are for 600 dpi. 2 Page Size Parameters are explained in the Page Control table in the PCL chapter of the Printer Language and Interfaces Technical Reference. 3 The width of the logical page for A4 paper can be changed from the printer control panel or your application. 4 For the Universal paper size, the area dimensions are listed in pel ranges. 5 Paper ID 99 will be supported for backward compatibility with other Lexmark printers. Paper ID 99 has the same logical paper size as ID 100 (compatible with HP LaserJet 5Si/5SiMx) but is 8 pels wider than the Lexmark 4039. 6 To support two‑sided printing, the Universal paper size length must be between 5.83 inches (148 mm) and 17 inches (431.8 mm); and the width must be between 8.27 inches (210 mm) and 11.69 inches (297 mm). Note: The explanation of the printable area assumes that the Print Area menu item is set to Normal. For more information, see “Print Area Menu Item” in the PCL chapter of the Printer Language and Interfaces Technical Reference.
Page 12 of the Lexmark 748de user manual — Printer Job Language (PJL)
Page 12 · click to enlarge
Page 12

Printer Job Language (PJL) 12

Printer Job Language (PJL)

PJL commands information

Your printer supports complete PJL commands, including certain commands that cause the printer to enter PCL emulation, PostScript emulation, and Personal Printer Data Stream (PPDS).

For a complete listing with descriptions of PJL commands, see the Printer Languages and Interfaces Technical Reference.

To determine which commands your printer supports, see “Appendix B: PJL support” on page 32.

Page 13 of the Lexmark 748de user manual — Supported paper sizes
Page 13 · click to enlarge
Page 13

PostScript (PS) emulation 13

PostScript (PS) emulation

Your printer supports complete PostScript emulation supplemental operators. For full, detailed descriptions of these operators, see the PostScript emulation chapter of the Printer Languages and Interfaces Technical Reference.

To determine which commands your printer supports, see “Appendix C: PostScript support” on page 83.

Supported paper sizes

X = Not supported

Paper sizes Printer model

Size Literal name Size (mm) Size (inches) Size (points) C746, C748 X746, X748

11 x 17 11x17 279.4 x 431.8 11 x 17 792 x 1224 X X

17 x 11 ledger 431.8 x 279.4 17 x 11 1224 x 792 X X

A3 a3 297 x 420 11.7 x 16.54 842 x 1191 X X

A4 a4 210.0 x 297.0 8.3 x 11.7 595 x 842

A5 a5 148.0 x 210.0 5.83 x 8.27 419 x 595

A6 a6 105.0 x 148.0 4.13 x 5.83 297 x 419

Executive executivepage 184.2 x 266.7 7.25 x 10.5 522 x 756

Folio folio 215.9 x 330.2 8.5 x 13.0 612 x 936

JIS B4 b4* 257 x 364 10.12 x 14.33 729 x 1032 X X

JIS B5 b5* 182.0 x 257.0 7.2 x 10.1 516 x 729

Legal legal 215.9 x 355.6 8.5 x 14.0 612 x 1008

Letter letter 215.9 x 279.4 8.5 x 11.0 612 x 792

Oficio oficio 215.9 x 340.4 8.5 x 13.4 612 x 965 (Lexmark‑unique size)

612 x 972 (official PostScript size)

Statement statement 139.7 x 215.9 5.5 x 8.5 396 x 612

Universal 216 x 1219 8.5 x 48 841.68 x 3456

* This is a Japanese Industry Standard (JIS) paper size. The same named designation is used by the JIS and International Organization for Standardization (ISO) for different paper sizes.

Page 14 of the Lexmark 748de user manual — C746, C748 X746, X748
Page 14 · click to enlarge
Page 14

PostScript (PS) emulation 14

PostScript paper tray support

When the printer receives one of the operators listed in “Tray selected with tray operators” on page 14, it performs the actions listed in this section. This paper tray selection process ends when a suitable paper source is chosen and paper is fed from this tray.

  • The printer checks the value of manualfeed in statusdict and the ManualFeed page device parameter. If either one is true, then the printer sends a message to load the requested size in the manual feeder or multipurpose feeder.
  • The PageSize Policy is set to 0 by means of setpagedevice .
  • The printer checks the paper size loaded in the current active source to determine if it matches the requested size. If the sizes match, then the paper is fed from the active source.
  • Note: The current active tray is the last source that was selected from the printer control panel or by the printer language.
  • If the requested size and the size loaded in the active source do not match, then the sources are searched in the order defined by the Priority array in the InputAttributes dictionary in the pagedevice dictionary.
  • If the requested media size is not found by the previous search, then the following search order is used: – Tray 1 – Tray 2 – Tray 3 – Multipurpose feeder – Tray 4 – Tray 5
  • If the requested size cannot be located in any automatic source, then a configurationerror is issued and the job is flushed.

For printers that support automatic two‑sided printing (duplexing):

  • Automatic two ‑ sided printing is not supported for custom-size paper or for envelopes in the multipurpose feeder. Automatic two ‑ sided printing is supported from the multipurpose feeder for all other papers.
  • If the paper source is changed before the back side of a two ‑ sided page prints, then a blank back page prints, the paper source changes, and the information for the back side of the page is printed on the front side of a page sent from the new paper source.

When these operators are used, it is equivalent to executing the following PostScript emulation sequence:

>>

where x y are the PageSize in points.

Tray selected with tray operators

Operator Tray selected (corresponding image size is set)

C746, C748 X746, X748

11x17tray Tray with 11 x 17‑size paper X X

a3tray Tray with A3‑size paper X X

setpagedevice

Page 15 of the Lexmark 748de user manual — Envelope sizes supported
Page 15 · click to enlarge
Page 15

PostScript (PS) emulation 15

Lexmark 748de — PostScript envelope size support diagram (page 15)
Fig. 2 · PostScript envelope size support

PostScript envelope size support

The literal names in “Envelope sizes supported” on page 15 are also supported as operators in userdict. These operators change the image size, but do not change the active paper source. Therefore, when these operators are used, part of the image may be clipped.

When these literal names are used as operators, it is equivalent to executing the following PostScript emulation sequence. The following example uses a 3.875 x 7.5 envelope.

>>setpagedevice

Envelope sizes supported

Lexmark 748de — Envelope sizes supported diagram (page 15)
Fig. 3 · Envelope sizes supported

Size name Literal name Size (mm) Size (inches) Size (points) C746, C748 X746,

7 3/4 3.875x7.5envelope 98.4 x 190.5 3.875 x 7.5 279 x 540

Commercial 9 3.875x8.875envelope 98.4 x 225.4 3.875 x 8.875 279 x 639

Page 16 of the Lexmark 748de user manual — PostScript envelope tray support
Page 16 · click to enlarge
Page 16

PostScript (PS) emulation 16

Lexmark 748de — PostScript envelope tray support diagram (page 16)
Fig. 4 · PostScript envelope tray support

Size name Literal name Size (mm) Size (inches) Size (points) C746, C748 X746,

Commercial 10 4.125x9.5envelope 104.8 x 241.3 4.125 x 9.5 297 x 684

International B5 176x250envelope 176 x 250 6.93 x 9.84 499 x 708

International C5 162x229envelope 162 x 229 6.38 x 9.01 459 x 649

International DL 110x220envelope 110 x 220 4.33 x 8.66 312 x 624

Other envelope otherenvelope 296.93 x 427.48 11.69 x 16.83 842 x 1212

Literal names supported

Lexmark 748de — Literal names supported diagram (page 16)
Fig. 5 · Literal names supported

Literal name Compatible literal name C746, C748 X746, X748

PostScript envelope tray support

If manualfeed in statusdict and the ManualFeed page device parameter are false when the printer receives one of the envelopetray operators listed in “Envelopetray operator selections” on page 17, then the following occurs:

  • The printer sets the PageSize Policy to 0 .
  • The printer checks the active source to see if it matches the requested envelope size. If the sizes match, then the envelope is fed from the active source.
  • Note: The active source is the last source selected from the printer control panel or data stream.
  • If the requested size and the size loaded in the active source do not match, then the sources are searched in the order defined by the Priority array in the InputAttributes dictionary in the pagedevice dictionary.
  • If the requested media size is not found by the previous search, then the following search order is used: – Envelope feeder – Multipurpose feeder
Page 17 of the Lexmark 748de user manual — Envelopetray operator selections
Page 17 · click to enlarge
Page 17

PostScript (PS) emulation 17

  • If the requested size and type are not available from any automatic source, then you are prompted to load the requested envelope size and type in the manual feed source.
  • If the size is still not available, then a configurationerror is issued, and the print job is flushed.

If manualfeed or ManualFeed is true, then the printer prompts you to load the requested size manually. If no manual feed exists on the printer, then a rangecheck error message is issued.

The envelope tray the printer selects when it receives an envelopetray operator is listed in “Envelopetray operator selections” on page 17. These operators are equivalent to executing the following PostScript emulation sequence:

setpagedevice

where x y are the PageSize in points.

Envelopetray operator selections

Lexmark 748de — Envelopetray operator selections diagram (page 17)
Fig. 6 · Envelopetray operator selections

Operator Tray selected (corresponding image size is set) C746, C748 X746, X748

110x220envelopetray Tray with 110 x 220‑size envelopes

dlenvelopetray Tray with 110 x 220‑size envelopes

162x229envelopetray Tray with 162 x 229‑size envelopes

c5envelopetray Tray with 162 x 229‑size envelopes

176x250envelopetray Tray with 176 x 250‑size envelopes

b5envelopetray Tray with 176 x 250‑size envelopes

3.875x7.5envelopetray Tray with 3.875 x 7.5‑size envelopes

monarcenvelopetray Tray with 3.875 x 7.5‑size envelopes

3.875x8.875envelopetray Tray with 3.875 x 8.875‑size envelopes

4.125x9.5envelopetray Tray with 4.125 x 9.5‑size envelopes

com10envelopetray Tray with 4.125 x 9.5‑size envelopes

Page 18 of the Lexmark 748de user manual — Noise emission levels
Page 18 · click to enlarge
Page 18

Printer specifications

Airflow requirement

The room should meet ASHRAE 62—1989 standards.

Noise emission levels

The following measurements were made in accordance with ISO 7779 and reported in conformance with ISO 9296.

Lexmark 748de — Noise emission levels diagram (page 18)
Fig. 7 · Noise emission levels

ADF color copy Not applicable Not applicable 58 58

ADF color scan Not applicable Not applicable 54 54

ADF mono copy Not applicable Not applicable 59 57

ADF mono scan Not applicable Not applicable 54 54

ADF color copy Not applicable Not applicable 7.2 7.2

ADF color scan Not applicable Not applicable 7.2 7.4

Printer specifications 18

Page 19 of the Lexmark 748de user manual — Electrical specifications
Page 19 · click to enlarge
Page 19
Lexmark 748de — Electrical specifications diagram (page 19)
Fig. 8 · Electrical specifications

ADF mono copy Not applicable Not applicable 7.4 7.5

ADF mono scan Not applicable Not applicable 7.2 7.4

Electrical specifications

Lexmark 748de — Electrical specifications diagram (page 19)
Fig. 9 · Electrical specifications

C746 SFP low‑voltage models 100–110 V at 50–60Hz, nominal

C748 SFP low‑voltage models 110–127 V at 50–60Hz, nominal

C746, C748 SFP high‑voltage models 220–240 V at 50–60Hz, nominal

X746, X748 MFP low‑voltage models 100–127 V at 50–60Hz, nominal

X746, X748 MFP high‑voltage models 220–240 V at 50–60Hz, nominal

Printer specifications 19

Page 20 of the Lexmark 748de user manual — Physical specifications
Page 20 · click to enlarge
Page 20

Power requirements

The following table specifies the nominal average power requirements for the base configuration, including fuser power.

Lexmark 748de — Power requirements diagram (page 20)
Fig. 10 · Power requirements

Print (simplex) 535 W 535 W 560 W 560 W

Print (duplex) 420 W 420 W 435 W 435 W

Off 0 W 0 W 0 W 0 W

Copy Not applicable Not applicable 600 W 600 W

ADF scan Not applicable Not applicable 85 W 85 W

Physical specifications

Single‑function printer dimensions (unpackaged)

Lexmark 748de — Physical specifications diagram (page 20)
Fig. 11 · Physical specifications

Printer model Height Width Depth Weight with cartridge (unpackaged)

C746 455 mm (17.9 in.) 435 mm (17.1 in.) 400 mm (15.7 in.) 25.2 kg (55.6 lb)

C748 455 mm (17.9 in.) 435 mm (17.1 in.) 400 mm (15.7 in.) 25.6 kg (56.4 lb)

Multiple‑function printer dimensions (unpackaged)

Lexmark 748de — Physical specifications diagram (page 20)
Fig. 12 · Physical specifications

Printer model Height Width Depth Weight with cartridge (unpackaged)

X746de 787 mm (31.0 in.) 546 mm (21.5 in.) 622 mm (24.5 in.) 44.0 kg (97.0 lb)

X748de 787 mm (31.0 in.) 546 mm (21.5 in.) 622 mm (24.5 in.) 44.2 kg (97.5 lb)

X748dte 909 mm (35.8 in.) 546 mm (21.5 in.) 622 mm (24.5 in.) 48.3 kg (106.5 lb)

Printer specifications 20

Page 21 of the Lexmark 748de user manual — Printer air temperature ranges
Page 21 · click to enlarge
Page 21

Dimensions of the C746, C748, X746, X748 hardware options (unpackaged)

Option Height Width Depth Weight with cartridge (unpackaged)

Optional 550‑sheet tray1

122 mm (4.8 in.) 435 mm (17.1 in.) 545 mm (21.5 in.) 4.5 kg (10.0 lb)

Optional 2000‑sheet tray2

345 mm (13.6 in.) 435 mm (17.1 in.) 545 mm (21.5 in.) 26.1 kg (57.5 lb)

Spacer1 122 mm (4.8 in.) 435 mm (17.1 in.) 545 mm (21.5 in.) 3.2 kg (7.0 lb)

Swivel cabinet 264 mm (10.38 in.) 476 mm (18.75 in.) 600 mm (23.63 in.) 21.82 kg (48.1 lb)

Caster base3 110 mm (4.3 in.) 654 mm (25.7 in.) 752 mm (29.6 in.) 31.8 kg (70 lb)

1 The 550‑sheet tray or spacer is approximately 169 mm (6.6 in,) high if the anti‑tip posts are included.

2 The 2000‑sheet tray is approximately 387 mm (15.2 in.) high if the anti‑tip posts are included.

3 The caster base is approximately 130 mm (5.1 in.) high if the anti‑tip posts are included.

Clearance requirements

Lexmark 748de — Clearance requirements diagram (page 21)
Fig. 13 · Clearance requirements

Printer model Left side Right side Front Rear Top

C746, C748 150 mm (5.9 in.) 100 mm (3.9 in.) 400 mm (15.7 in.) 100 mm (3.9 in.) 150 mm (5.9 in.)

Printer model Left side Right side Front Rear Top

X746, X748 100 mm (3.9 in.) 100 mm (3.9 in.) 483 mm (19 in.) 100 mm (3.9 in.) 394 mm (15.5 in.)

Environmental conditions

Printer air temperature ranges

Lexmark 748de — Printer air temperature ranges diagram (page 21)
Fig. 14 · Printer air temperature ranges

C746, C748 15.6 to 32.20°C (60 to 90°F) 10.0 to 40°C (50 to 104°F) ‑40 to 40°C (‑40 to 104°F)

X746, X748 15.6 to 32.0°C (60 to 90°F) 10.0 to 40°C (50 to 104°F) ‑40 to 40°C (‑40 to 104°F)

Printer specifications 21

Page 22 of the Lexmark 748de user manual — Altitude specifications
Page 22 · click to enlarge
Page 22

Values for the ambient operating environment

C746, C748

15.6 to 32.2°C (60 to 90°F)

8–80% RH

15.6 to 32.2°C (60 to 90°F)

8–80% RH

Printer humidity ranges

Air relative humidity (RH)

Operating value Shipping and storage value

C746, C748 8–80% 8–80% 5–95%

Cartridge air temperature ranges

Shipping and storage value

‑40 to 40°C (40 to 104°F)

C746, C748

‑40 to 40°C (40 to 104°F)

Altitude and atmospheric pressure specifications

Altitude specifications

Printer model Altitude (above sea level)

Operating value Shipping and storage value

C746, C748 0–3048 m (10000 ft) 0–10300 m (34000 ft)

X746, X748 0–3048 m (10000 ft) 0–10300 m (34000 ft)

Show 7 more labels / short text on this page
Printer specifications 22 · Printer model · Ambient operating environment · Printer model · Unpackaged Packaged · Printer model · Cartridges (packaged)
Page 23 of the Lexmark 748de user manual — Appendix A: PCL support
Page 23 · click to enlarge
Page 23
Appendix APCL support 23

Appendix A: PCL support

PCL emulation commands

Lexmark 748de — Appendix A: PCL support diagram (page 23)
Fig. 15 · Appendix A: PCL support
Page 24 of the Lexmark 748de user manual — Appendix A: PCL support
Page 24 · click to enlarge
Page 24
Appendix APCL support 24
Lexmark 748de — Appendix A: PCL support diagram (page 24)
Fig. 16 · Appendix A: PCL support

ESC&l#A [optional data] Set Page Size with Custom Load Messaging

ESC&l#C Set Vertical Motion Index (VMI)

Page 25 of the Lexmark 748de user manual — Appendix A: PCL support
Page 25 · click to enlarge
Page 25
Appendix APCL support 25
Lexmark 748de — Appendix A: PCL support diagram (page 25)
Fig. 17 · Appendix A: PCL support
Page 26 of the Lexmark 748de user manual — Appendix A: PCL support
Page 26 · click to enlarge
Page 26
Appendix APCL support 26
Lexmark 748de — Appendix A: PCL support diagram (page 26)
Fig. 18 · Appendix A: PCL support

ESC)#X Select Secondary Download Font (by Font ID)

ESC)s#V Secondary Font Height (Point Size) X X

Page 27 of the Lexmark 748de user manual — Appendix A: PCL support
Page 27 · click to enlarge
Page 27
Appendix APCL support 27
Lexmark 748de — Appendix A: PCL support diagram (page 27)
Fig. 19 · Appendix A: PCL support

ESC*l#W[data] Color Lookup Tables X X

ESC*p#X Set Horizontal Cursor Position (in PCL Units)

ESC*p#Y Set Vertical Cursor Position (in PCL Units)

Page 28 of the Lexmark 748de user manual — Appendix A: PCL support
Page 28 · click to enlarge
Page 28
Appendix APCL support 28
Lexmark 748de — Appendix A: PCL support diagram (page 28)
Fig. 20 · Appendix A: PCL support
Page 29 of the Lexmark 748de user manual — GL/2 commands
Page 29 · click to enlarge
Page 29
Appendix APCL support 29
Lexmark 748de — GL/2 commands diagram (page 29)
Fig. 21 · GL/2 commands

ESC%‑12345X Universal Exit Language (UEL) / Start of PJL

GL/2 commands

Lexmark 748de — GL/2 commands diagram (page 29)
Fig. 22 · GL/2 commands
Page 30 of the Lexmark 748de user manual — GL/2 commands
Page 30 · click to enlarge
Page 30
Appendix APCL support 30
Lexmark 748de — GL/2 commands diagram (page 30)
Fig. 23 · GL/2 commands
Page 31 of the Lexmark 748de user manual — GL/2 commands
Page 31 · click to enlarge
Page 31
Appendix APCL support 31
Lexmark 748de — GL/2 commands diagram (page 31)
Fig. 24 · GL/2 commands
Page 32 of the Lexmark 748de user manual — Common variables for both printer languages
Page 32 · click to enlarge
Page 32

Common variables for both printer languages

Lexmark 748de — Common variables for both printer languages diagram (page 32)
Fig. 25 · Common variables for both printer languages
Page 33 of the Lexmark 748de user manual — Appendix B: PJL support
Page 33 · click to enlarge
Page 33
Lexmark 748de — Appendix B: PJL support diagram (page 33)
Fig. 26 · Appendix B: PJL support
Page 34 of the Lexmark 748de user manual — Lexmark ‑ unique PJL variables for both printer languages
Page 34 · click to enlarge
Page 34
Lexmark 748de — Lexmark-unique PJL variables for both printer languages diagram (page 34)
Fig. 27 · Lexmark-unique PJL variables for both printer langua…

Lexmark ‑ unique PJL variables for both printer languages

Lexmark 748de — Lexmark ‑ unique PJL variables for both printer languages diagram (page 34)
Fig. 28 · Lexmark ‑ unique PJL variables for both printer lang…
Page 35 of the Lexmark 748de user manual — Lexmark-unique PJL variables for both printer languages
Page 35 · click to enlarge
Page 35
Lexmark 748de — Lexmark-unique PJL variables for both printer languages diagram (page 35)
Fig. 29 · Lexmark-unique PJL variables for both printer langua…
Page 36 of the Lexmark 748de user manual — Status Readback commands
Page 36 · click to enlarge
Page 36

Common variables for PostScript emulation

Lexmark 748de — Common variables for PostScript emulation diagram (page 36)
Fig. 30 · Common variables for PostScript emulation

Lexmark ‑ unique variables for PostScript emulation

Lexmark 748de — Lexmark ‑ unique variables for PostScript emulation diagram (page 36)
Fig. 31 · Lexmark ‑ unique variables for PostScript emulation

Lexmark ‑ unique LRESOURCE variables

Lexmark 748de — Lexmark ‑ unique LRESOURCE variables diagram (page 36)
Fig. 32 · Lexmark ‑ unique LRESOURCE variables

Status Readback commands

Lexmark 748de — Status Readback commands diagram (page 36)
Fig. 33 · Status Readback commands
Page 37 of the Lexmark 748de user manual — PJL messages for auto-continuable conditions
Page 37 · click to enlarge
Page 37
Lexmark 748de — USTATUS unsolicited status variables diagram (page 37)
Fig. 34 · USTATUS unsolicited status variables

USTATUS unsolicited status variables

Lexmark 748de — USTATUS unsolicited status variables diagram (page 37)
Fig. 35 · USTATUS unsolicited status variables

PJL messages for auto-continuable conditions

Lexmark 748de — PJL messages for auto-continuable conditions diagram (page 37)
Fig. 36 · PJL messages for auto-continuable conditions

Message Status code Return string C746, C748 X746, X748

30016 37 Insufficient memory, some Held Jobs were deleted

30016 37 Insufficient memory, some Held Jobs were deleted

Page 38 of the Lexmark 748de user manual — USTATUS unsolicited status variables
Page 38 · click to enlarge
Page 38
Lexmark 748de — USTATUS unsolicited status variables diagram (page 38)
Fig. 37 · USTATUS unsolicited status variables

Message Status code Return string C746, C748 X746, X748

30016 37 Insufficient memory, some Held Jobs will not be restored

30016 37 Insufficient memory for Flash Memory Defragment operation

Intervention Required - Held Jobs May Not Be Restored (57 Configuration Change)

30016 57 Configuration change, some held jobs were not restored

30016 37 Insufficient memory, some held jobs will not be restored

30017 39 Complex page, some data may not have printed

Page 39 of the Lexmark 748de user manual — USTATUS unsolicited status variables
Page 39 · click to enlarge
Page 39
Lexmark 748de — USTATUS unsolicited status variables diagram (page 39)
Fig. 38 · USTATUS unsolicited status variables

Message Status code Return string C746, C748 X746, X748

Page 40 of the Lexmark 748de user manual — USTATUS unsolicited status variables
Page 40 · click to enlarge
Page 40
Lexmark 748de — USTATUS unsolicited status variables diagram (page 40)
Fig. 39 · USTATUS unsolicited status variables

Message Status code Return string C746, C748 X746, X748

30076 35 Insufficient memory to support Resource Save feature

30076 35 Insufficient memory to support Resource Save feature

Page 41 of the Lexmark 748de user manual — USTATUS unsolicited status variables
Page 41 · click to enlarge
Page 41
Lexmark 748de — USTATUS unsolicited status variables diagram (page 41)
Fig. 40 · USTATUS unsolicited status variables

Message Status code Return string C746, C748 X746, X748

Page 42 of the Lexmark 748de user manual — USTATUS unsolicited status variables
Page 42 · click to enlarge
Page 42
Lexmark 748de — USTATUS unsolicited status variables diagram (page 42)
Fig. 41 · USTATUS unsolicited status variables

Message Status code Return string C746, C748 X746, X748

32002 52 Not enough free space in flash memory for resources

Page 43 of the Lexmark 748de user manual — USTATUS unsolicited status variables
Page 43 · click to enlarge
Page 43
Lexmark 748de — USTATUS unsolicited status variables diagram (page 43)
Fig. 42 · USTATUS unsolicited status variables

Message Status code Return string C746, C748 X746, X748

40048 [Pick up text from 'data1' and 'data2 but not 'userMessage1' and 'userMessage2']

40049 [Pick up text from 'data1' and 'data2' but not 'userMessage1' and 'userMessage2']

Page 44 of the Lexmark 748de user manual — PJL messages for attendance conditions
Page 44 · click to enlarge
Page 44
Lexmark 748de — PJL messages for attendance conditions diagram (page 44)
Fig. 43 · PJL messages for attendance conditions

Message Status code Return string C746, C748 X746, X748

PJL messages for attendance conditions

Lexmark 748de — PJL messages for attendance conditions diagram (page 44)
Fig. 44 · PJL messages for attendance conditions

Message Status code Return string C746, C748 X746, X748

* This message contains a subset of letters CMYK, where CMYK denotes Cyan, Magenta, Yellow, and Black cartridges, respectively.

Page 45 of the Lexmark 748de user manual — PJL messages for attendance conditions
Page 45 · click to enlarge
Page 45
Lexmark 748de — PJL messages for attendance conditions diagram (page 45)
Fig. 45 · PJL messages for attendance conditions

Message Status code Return string C746, C748 X746, X748

40019 Remove originals from the scanner automatic document feeder

* This message contains a subset of letters CMYK, where CMYK denotes Cyan, Magenta, Yellow, and Black cartridges, respectively.

Page 46 of the Lexmark 748de user manual — PJL messages for attendance conditions
Page 46 · click to enlarge
Page 46
Lexmark 748de — PJL messages for attendance conditions diagram (page 46)
Fig. 46 · PJL messages for attendance conditions

Message Status code Return string C746, C748 X746, X748

* This message contains a subset of letters CMYK, where CMYK denotes Cyan, Magenta, Yellow, and Black cartridges, respectively.

Page 47 of the Lexmark 748de user manual — PJL messages for attendance conditions
Page 47 · click to enlarge
Page 47
Lexmark 748de — PJL messages for attendance conditions diagram (page 47)
Fig. 47 · PJL messages for attendance conditions

Message Status code Return string C746, C748 X746, X748

40021 Cover Open, Close Top Covers, Close Door, or Insert Cartridge

* This message contains a subset of letters CMYK, where CMYK denotes Cyan, Magenta, Yellow, and Black cartridges, respectively.

Page 48 of the Lexmark 748de user manual — PJL messages for attendance conditions
Page 48 · click to enlarge
Page 48
Lexmark 748de — PJL messages for attendance conditions diagram (page 48)
Fig. 48 · PJL messages for attendance conditions

Message Status code Return string C746, C748 X746, X748

* This message contains a subset of letters CMYK, where CMYK denotes Cyan, Magenta, Yellow, and Black cartridges, respectively.

Page 49 of the Lexmark 748de user manual — PJL messages for attendance conditions
Page 49 · click to enlarge
Page 49
Lexmark 748de — PJL messages for attendance conditions diagram (page 49)
Fig. 49 · PJL messages for attendance conditions

Message Status code Return string C746, C748 X746, X748

Intervention Required - Install Env Feeder or Cancel Job

* This message contains a subset of letters CMYK, where CMYK denotes Cyan, Magenta, Yellow, and Black cartridges, respectively.

Page 50 of the Lexmark 748de user manual — PJL messages for attendance conditions
Page 50 · click to enlarge
Page 50
Lexmark 748de — PJL messages for attendance conditions diagram (page 50)
Fig. 50 · PJL messages for attendance conditions

Message Status code Return string C746, C748 X746, X748

* This message contains a subset of letters CMYK, where CMYK denotes Cyan, Magenta, Yellow, and Black cartridges, respectively.

Page 51 of the Lexmark 748de user manual — PJL messages for attendance conditions
Page 51 · click to enlarge
Page 51
Lexmark 748de — PJL messages for attendance conditions diagram (page 51)
Fig. 51 · PJL messages for attendance conditions

Message Status code Return string C746, C748 X746, X748

* This message contains a subset of letters CMYK, where CMYK denotes Cyan, Magenta, Yellow, and Black cartridges, respectively.

Page 52 of the Lexmark 748de user manual — PJL messages for attendance conditions
Page 52 · click to enlarge
Page 52
Lexmark 748de — PJL messages for attendance conditions diagram (page 52)
Fig. 52 · PJL messages for attendance conditions

Message Status code Return string C746, C748 X746, X748

* This message contains a subset of letters CMYK, where CMYK denotes Cyan, Magenta, Yellow, and Black cartridges, respectively.

Page 53 of the Lexmark 748de user manual — PJL messages for attendance conditions
Page 53 · click to enlarge
Page 53
Lexmark 748de — PJL messages for attendance conditions diagram (page 53)
Fig. 53 · PJL messages for attendance conditions

Message Status code Return string C746, C748 X746, X748

40129 84.xx Replace [color] imaging unit and [color] cartridge

* This message contains a subset of letters CMYK, where CMYK denotes Cyan, Magenta, Yellow, and Black cartridges, respectively.

Page 54 of the Lexmark 748de user manual — PJL messages for attendance conditions
Page 54 · click to enlarge
Page 54
Lexmark 748de — PJL messages for attendance conditions diagram (page 54)
Fig. 54 · PJL messages for attendance conditions

Message Status code Return string C746, C748 X746, X748

* This message contains a subset of letters CMYK, where CMYK denotes Cyan, Magenta, Yellow, and Black cartridges, respectively.

Page 55 of the Lexmark 748de user manual — PJL messages for attendance conditions
Page 55 · click to enlarge
Page 55
Lexmark 748de — PJL messages for attendance conditions diagram (page 55)
Fig. 55 · PJL messages for attendance conditions

Message Status code Return string C746, C748 X746, X748

* This message contains a subset of letters CMYK, where CMYK denotes Cyan, Magenta, Yellow, and Black cartridges, respectively.

Page 56 of the Lexmark 748de user manual — PJL messages for attendance conditions
Page 56 · click to enlarge
Page 56
Lexmark 748de — PJL messages for attendance conditions diagram (page 56)
Fig. 56 · PJL messages for attendance conditions

Message Status code Return string C746, C748 X746, X748

40309 32.xx Black cartridge part number unsupported by device

* This message contains a subset of letters CMYK, where CMYK denotes Cyan, Magenta, Yellow, and Black cartridges, respectively.

Page 57 of the Lexmark 748de user manual — PJL messages for attendance conditions
Page 57 · click to enlarge
Page 57
Lexmark 748de — PJL messages for attendance conditions diagram (page 57)
Fig. 57 · PJL messages for attendance conditions

Message Status code Return string C746, C748 X746, X748

40310 32.xx Cyan cartridge part number unsupported by device

40311 32.xx Magenta cartridge part number unsupported by device

40312 32.xx Yellow cartridge part number unsupported by device

* This message contains a subset of letters CMYK, where CMYK denotes Cyan, Magenta, Yellow, and Black cartridges, respectively.

Page 58 of the Lexmark 748de user manual — PJL messages for attendance conditions
Page 58 · click to enlarge
Page 58
Lexmark 748de — PJL messages for attendance conditions diagram (page 58)
Fig. 58 · PJL messages for attendance conditions

Message Status code Return string C746, C748 X746, X748

* This message contains a subset of letters CMYK, where CMYK denotes Cyan, Magenta, Yellow, and Black cartridges, respectively.

Page 59 of the Lexmark 748de user manual — PJL messages for attendance conditions
Page 59 · click to enlarge
Page 59
Lexmark 748de — PJL messages for attendance conditions diagram (page 59)
Fig. 59 · PJL messages for attendance conditions

Message Status code Return string C746, C748 X746, X748

40409 30.xx Missing black cartridge and/or black imaging unit

40410 30.xx Missing cyan cartridge and/or cyan imaging unit

* This message contains a subset of letters CMYK, where CMYK denotes Cyan, Magenta, Yellow, and Black cartridges, respectively.

Page 60 of the Lexmark 748de user manual — PJL messages for attendance conditions
Page 60 · click to enlarge
Page 60
Lexmark 748de — PJL messages for attendance conditions diagram (page 60)
Fig. 60 · PJL messages for attendance conditions

Message Status code Return string C746, C748 X746, X748

40411 30.xx Missing magenta cartridge and/or magenta imaging unit

40412 30.xx Missing yellow cartridge and/or yellow imaging unit

* This message contains a subset of letters CMYK, where CMYK denotes Cyan, Magenta, Yellow, and Black cartridges, respectively.

Page 61 of the Lexmark 748de user manual — PJL messages for paper handling
Page 61 · click to enlarge
Page 61

PJL messages for paper handling

Lexmark 748de — PJL messages for paper handling diagram (page 61)
Fig. 61 · PJL messages for paper handling

Message Status code Return string C746, C748 X746, X748

Intervention Required - Remove Paper From Standard Output Bin

Page 62 of the Lexmark 748de user manual — PJL messages for paper handling
Page 62 · click to enlarge
Page 62
Lexmark 748de — PJL messages for paper handling diagram (page 62)
Fig. 62 · PJL messages for paper handling

Message Status code Return string C746, C748 X746, X748

41xyy Load [paper source] with [paper type] [paper size]

Page 63 of the Lexmark 748de user manual — PJL messages for paper handling
Page 63 · click to enlarge
Page 63
Lexmark 748de — PJL messages for paper handling diagram (page 63)
Fig. 63 · PJL messages for paper handling

Message Status code Return string C746, C748 X746, X748

41xyy Load Manual Feeder with [paper type] [paper size]

41xyy Load single sheet feeder with [Custom Type Name]

41xyy Load single sheet feeder with [paper type] [paper size]

41xyy Change [paper source] to [Custom Type Name], load [orientation]

41xyy Change [paper source] to [Custom String] load [orientation]

41xyy Change [paper source] to [paper type] [paper size]

Page 64 of the Lexmark 748de user manual — PJL messages for paper handling
Page 64 · click to enlarge
Page 64
Lexmark 748de — PJL messages for paper handling diagram (page 64)
Fig. 64 · PJL messages for paper handling

Message Status code Return string C746, C748 X746, X748

41xyy Change [paper source] to [paper type] [paper size] load [orientation]

41xxy Load Manual Feeder with [paper type] [paper size]

Page 65 of the Lexmark 748de user manual — PJL messages for paper jams
Page 65 · click to enlarge
Page 65

PJL messages for paper jams

Lexmark 748de — PJL messages for paper jams diagram (page 65)
Fig. 65 · PJL messages for paper jams

w indicates that this message includes a letter indicating a door or cover that needs to be opened.

x represents the number of jammed pages in the printer.

Page 66 of the Lexmark 748de user manual — PJL messages for paper jams
Page 66 · click to enlarge
Page 66
Lexmark 748de — PJL messages for paper jams diagram (page 66)
Fig. 66 · PJL messages for paper jams

w indicates that this message includes a letter indicating a door or cover that needs to be opened.

x represents the number of jammed pages in the printer.

y represents the tray number. z represents the bin number.

Page 67 of the Lexmark 748de user manual — PJL messages for paper jams
Page 67 · click to enlarge
Page 67
Lexmark 748de — PJL messages for paper jams diagram (page 67)
Fig. 67 · PJL messages for paper jams

w indicates that this message includes a letter indicating a door or cover that needs to be opened.

x represents the number of jammed pages in the printer.

y represents the tray number. z represents the bin number.

Page 68 of the Lexmark 748de user manual — PJL messages for paper jams
Page 68 · click to enlarge
Page 68
Lexmark 748de — PJL messages for paper jams diagram (page 68)
Fig. 68 · PJL messages for paper jams

w indicates that this message includes a letter indicating a door or cover that needs to be opened.

x represents the number of jammed pages in the printer.

y represents the tray number. z represents the bin number.

Page 69 of the Lexmark 748de user manual — PJL messages for paper jams
Page 69 · click to enlarge
Page 69
Lexmark 748de — PJL messages for paper jams diagram (page 69)
Fig. 69 · PJL messages for paper jams

w indicates that this message includes a letter indicating a door or cover that needs to be opened.

x represents the number of jammed pages in the printer.

y represents the tray number. z represents the bin number.

Page 70 of the Lexmark 748de user manual — PJL messages for paper jams
Page 70 · click to enlarge
Page 70
Lexmark 748de — PJL messages for paper jams diagram (page 70)
Fig. 70 · PJL messages for paper jams

w indicates that this message includes a letter indicating a door or cover that needs to be opened.

x represents the number of jammed pages in the printer.

y represents the tray number. z represents the bin number.

Page 71 of the Lexmark 748de user manual — Lexmark ‑ unique PJL commands
Page 71 · click to enlarge
Page 71
Lexmark 748de — Service errors diagram (page 71)
Fig. 71 · Service errors

w indicates that this message includes a letter indicating a door or cover that needs to be opened.

x represents the number of jammed pages in the printer.

Service errors

Lexmark 748de — Service errors diagram (page 71)
Fig. 72 · Service errors

Device attendance messages

Lexmark 748de — Device attendance messages diagram (page 71)
Fig. 73 · Device attendance messages

Lexmark ‑ unique PJL commands

These commands are Lexmark extensions which have been added to the PJL command set to provide the user with remote control of many printer functions.

Lexmark 748de — Lexmark ‑ unique PJL commands diagram (page 71)
Fig. 74 · Lexmark ‑ unique PJL commands
Page 72 of the Lexmark 748de user manual — Service errors
Page 72 · click to enlarge
Page 72
Lexmark 748de — Service errors diagram (page 72)
Fig. 75 · Service errors
Page 73 of the Lexmark 748de user manual — LPROGRAM X X
Page 73 · click to enlarge
Page 73

Command C746, C748 X746, X748

  • LPRINTPSFONTS
  • LPRINTDIAG1TEST
  • LPRINTDIAG2TEST
  • LPRINTDIAG3TEST

LPROGRAM X X

LPROGRAMADAPTOR

LPROGRAMCOFF

LPROGRAMENG

LPROGRAMRIP

LWRITEOM

Page 74 of the Lexmark 748de user manual — Appendix C: PostScript support
Page 74 · click to enlarge
Page 74
Appendix CPostScript support 83

Appendix C: PostScript support

Supplemental operators

Lexmark 748de — Appendix C: PostScript support diagram (page 74)
Fig. 76 · Appendix C: PostScript support
Page 75 of the Lexmark 748de user manual — Appendix C: PostScript support
Page 75 · click to enlarge
Page 75
Appendix CPostScript support 84
Lexmark 748de — Appendix C: PostScript support diagram (page 75)
Fig. 77 · Appendix C: PostScript support
Page 76 of the Lexmark 748de user manual — Appendix C: PostScript support
Page 76 · click to enlarge
Page 76
Appendix CPostScript support 85
Lexmark 748de — Appendix C: PostScript support diagram (page 76)
Fig. 78 · Appendix C: PostScript support
Page 77 of the Lexmark 748de user manual — Page device parameters
Page 77 · click to enlarge
Page 77
Appendix CPostScript support 86
Lexmark 748de — Page device parameters diagram (page 77)
Fig. 79 · Page device parameters

Page device parameters

Lexmark 748de — Page device parameters diagram (page 77)
Fig. 80 · Page device parameters
Page 78 of the Lexmark 748de user manual — Page device parameters
Page 78 · click to enlarge
Page 78
Appendix CPostScript support 87
Lexmark 748de — Page device parameters diagram (page 78)
Fig. 81 · Page device parameters
Page 79 of the Lexmark 748de user manual — Page device parameters
Page 79 · click to enlarge
Page 79
Appendix CPostScript support 88
Lexmark 748de — Page device parameters diagram (page 79)
Fig. 82 · Page device parameters
Page 80 of the Lexmark 748de user manual — Page device parameters
Page 80 · click to enlarge
Page 80
Appendix CPostScript support 89
Lexmark 748de — Page device parameters diagram (page 80)
Fig. 83 · Page device parameters
Page 81 of the Lexmark 748de user manual — User interpreter parameters
Page 81 · click to enlarge
Page 81
Appendix CPostScript support 90
Lexmark 748de — User interpreter parameters diagram (page 81)
Fig. 84 · User interpreter parameters

User interpreter parameters

Lexmark 748de — User interpreter parameters diagram (page 81)
Fig. 85 · User interpreter parameters
Page 82 of the Lexmark 748de user manual — System interpreter parameters
Page 82 · click to enlarge
Page 82
Appendix CPostScript support 91
Lexmark 748de — System interpreter parameters diagram (page 82)
Fig. 86 · System interpreter parameters

System interpreter parameters

Lexmark 748de — System interpreter parameters diagram (page 82)
Fig. 87 · System interpreter parameters
Page 83 of the Lexmark 748de user manual — System interpreter parameters
Page 83 · click to enlarge
Page 83
Appendix CPostScript support 92
Lexmark 748de — System interpreter parameters diagram (page 83)
Fig. 88 · System interpreter parameters
Page 84 of the Lexmark 748de user manual — System interpreter parameters
Page 84 · click to enlarge
Page 84
Appendix CPostScript support 93
Lexmark 748de — System interpreter parameters diagram (page 84)
Fig. 89 · System interpreter parameters
Page 85 of the Lexmark 748de user manual — Devices supported
Page 85 · click to enlarge
Page 85
Appendix CPostScript support 94

Devices supported

Lexmark 748de — Devices supported diagram (page 85)
Fig. 90 · Devices supported
Page 86 of the Lexmark 748de user manual — Devices supported
Page 86 · click to enlarge
Page 86
Appendix CPostScript support 95
Lexmark 748de — Devices supported diagram (page 86)
Fig. 91 · Devices supported
Page 87 of the Lexmark 748de user manual — Device parameters
Page 87 · click to enlarge
Page 87
Appendix CPostScript support 96
Lexmark 748de — Device parameters diagram (page 87)
Fig. 92 · Device parameters

Device parameters

Lexmark 748de — Device parameters diagram (page 87)
Fig. 93 · Device parameters

Device Parameters for the Communication Device %Parallel%, %ParallelA%, %ParallelB%, %ParallelC%, %ParallelD%

Page 88 of the Lexmark 748de user manual — Device parameters
Page 88 · click to enlarge
Page 88
Appendix CPostScript support 97
Lexmark 748de — Device parameters diagram (page 88)
Fig. 94 · Device parameters

Device Parameters for the Communication Device %Serial%, %SerialA%, %SerialB%, %SerialC%, %SerialD%

Page 89 of the Lexmark 748de user manual — Device parameters
Page 89 · click to enlarge
Page 89
Appendix CPostScript support 98
Lexmark 748de — Device parameters diagram (page 89)
Fig. 95 · Device parameters

Device Parameters for the Communication Device %LocalTalk%, %LocalTalkA%, %LocalTalkB%, %LocalTalkC%, %LocalTalkD%

Device Parameters for the Communication Device %EtherTalk%, %EtherTalkA%, %EtherTalkB%, %EtherTalkC%, %EtherTalkD%

Page 90 of the Lexmark 748de user manual — Device parameters
Page 90 · click to enlarge
Page 90
Appendix CPostScript support 99
Lexmark 748de — Device parameters diagram (page 90)
Fig. 96 · Device parameters

Device Parameters for the Communication Device %IR%, %IR_A%, %IR_B%, %IR_C%, %IR_D%

Device Parameters for the Communication Device %USB%, %USB_A%, %USB_B%, %USB_C%, %USB_D%

Page 91 of the Lexmark 748de user manual — Device parameters
Page 91 · click to enlarge
Page 91
Appendix CPostScript support 100
Lexmark 748de — Device parameters diagram (page 91)
Fig. 97 · Device parameters

Device Parameters for the Communication Device %TokenTalk%, %TokenTalkA%, %TokenTalkB%, %TokenTalkC%, %TokenTalkD%

Device Parameters for the Communication Device %AppSocket%, %AppSocketA%, %AppSocketB%, %AppSocketC%, %AppSocketD%

Page 92 of the Lexmark 748de user manual — Device parameters
Page 92 · click to enlarge
Page 92
Appendix CPostScript support 101
Lexmark 748de — Device parameters diagram (page 92)
Fig. 98 · Device parameters

Device Parameters for the Communication Device %RemotePrinter%, %RemotePrinterA%, %RemotePrinterB%, %RemotePrinterC%, %RemotePrinterD%

Device Parameters for the Communication Device %PrintServer%, PrintServerA%, PrintServerB%, %PrintServerC%, %PrintServerD%

Device Parameters for the Communication Device %LPR%, %LPR_A%, %LPR_B%, %LPR_C%, %LPR_D%

Page 93 of the Lexmark 748de user manual — Device parameters
Page 93 · click to enlarge
Page 93
Appendix CPostScript support 102
Lexmark 748de — Device parameters diagram (page 93)
Fig. 99 · Device parameters

Device Parameters for the Communication Device %LexLink%, %LexLinkA%, %LexLinkB%, %LexLinkC%, %LexLinkD%

Device Parameters for the Communication Device %IP%, %IP_A%, %IP_B%, %IP_C%, %IP_D%

Device Parameters for the Communication Device %EthernetPhysical%, %EthernetPhysicalA%, %EthernetPhysicalB%, %EthernetPhysicalC%, %EthernetPhysicalD%

Device Parameters for the Communication Device %TokenRingPhysical%, %TokenRingPhysicalA%, %TokenRingPhysicalB%, %TokenRingPhysicalC%, %TokenRingPhysicalD%

Page 94 of the Lexmark 748de user manual — Device parameters
Page 94 · click to enlarge
Page 94
Appendix CPostScript support 103
Lexmark 748de — Device parameters diagram (page 94)
Fig. 100 · Device parameters

Device Parameters for the Parameters Device %Calendar%, %CalendarA%, %CalendarB%, %CalendarC%, %CalendarD%

Page 95 of the Lexmark 748de user manual — Device parameters
Page 95 · click to enlarge
Page 95
Appendix CPostScript support 104
Lexmark 748de — Device parameters diagram (page 95)
Fig. 101 · Device parameters
Page 96 of the Lexmark 748de user manual — PostScript message keys commands
Page 96 · click to enlarge
Page 96
Appendix CPostScript support 105
Lexmark 748de — PostScript message keys commands diagram (page 96)
Fig. 102 · PostScript message keys commands

PostScript message keys commands

Lexmark 748de — PostScript message keys commands diagram (page 96)
Fig. 103 · PostScript message keys commands
Page 98 of the Lexmark 748de user manual — Table of contents
Page 98 · click to enlarge
Page 98

Table of contents

Contentsp.3Introductionp.5Understanding letters after model numbersp.5Learning about the printerp.7Finding information about the printerp.7Printer Control Language (PCL) page formattingp.9Printable areasp.9Supported paper and envelope dimensionsp.10Printer Job Language (PJL)p.12PJL commands informationp.12PostScript (PS) emulationp.13Supported paper sizesp.13PostScript paper tray supportp.14PostScript envelope size supportp.15PostScript envelope tray supportp.16Printer specificationsp.18Airflow requirementp.18Noise emission levelsp.18Electrical specificationsp.19Power requirementsp.20Physical specificationsp.20Clearance requirementsp.21Environmental conditionsp.21Altitude and atmospheric pressure specificationsp.22Appendix A: PCL supportp.23PCL emulation commandsp.23GL/2 commandsp.29Appendix B: PJL supportp.32Common variables for both printer languagesp.32Lexmark-unique PJL variables for both printer languagesp.34Common variables for PostScript emulationp.36Lexmark-unique variables for PostScript emulationp.36Lexmark-unique LRESOURCE variablesp.36Status Readback commandsp.36USTATUS unsolicited status variablesp.37PJL messages for auto-continuable conditionsp.37PJL messages for attendance conditionsp.44PJL messages for paper handlingp.61PJL messages for paper jamsp.65Service errorsp.71Device attendance messagesp.71Lexmark-unique PJL commandsp.71Appendix C: PostScript supportp.74Supplemental operatorsp.74Page device parametersp.77User interpreter parametersp.81System interpreter parametersp.82Devices supportedp.85Device parametersp.87PostScript message keys commandsp.96Indexp.97
Sources

References & links

Pages referenced in this manual — manufacturer, support and downloads.

Ask about the Lexmark 748de

Owners and our team usually reply within a day — and your question helps the next person too.

Add your email to get notified when it’s answered — no spam, ever.

0 questions
No questions yet about the Lexmark 748de

Be the first to ask — other owners or our team will answer.

Original document

Lexmark 748de manual PDF

107 pages·2.8 MB·Printer·PDF
Click any page above to open it here
Page 1 / …
100%
Loading pages…