EN
Lexmark logo
Official user manual

Lexmark 356

257 pages·7.1 MB·Printer·PDF·ENDEFRITNLJA
Lexmark 356
Table of Contents 576 sections Contents · Safety information · Learning about the printer · Finding information about the printer · … ShowHide
Contentsp.2Safety informationp.10Learning about the printerp.12Finding information about the printerp.12Selecting a location for the printerp.13Printer configurationsp.15Basic functions of the scannerp.15Understanding the ADF and scanner glassp.16Understanding the printer control panelp.16Additional printer setupp.22Installing internal optionsp.22Available optionsp.22Accessing the system board to install internal optionsp.23Installing a memory cardp.25Installing a flash memory cardp.27Installing hardware optionsp.29Installing an optional tray or drawerp.29Attaching cablesp.30Verifying printer setupp.32Printing menu settings pagesp.32Printing a network setup pagep.32Setting up the printer softwarep.33Installing the printer softwarep.33Updating available options in the printer driverp.33Setting up wireless printingp.34Preparing to set up the printer on a wireless networkp.34Installing the printer on a wireless network (Windows)p.35Installing the printer on a wireless network (Macintosh)p.37Installing the printer on an Ethernet networkp.40Minimizing your printer's environmental impactp.43Saving paper and tonerp.43Using recycled paper and other office papersp.43Conserving suppliesp.44Saving energyp.45Using Eco-Modep.45Reducing printer noisep.45Adjusting Power Saverp.46Recyclingp.47Recycling Lexmark productsp.47Recycling Lexmark packagingp.47Returning Lexmark cartridges for reuse or recyclingp.47Loading paper and specialty mediap.48Linking and unlinking traysp.48Linking traysp.48Unlinking traysp.48Assigning a Custom Type namep.48Setting the Paper Size and Paper Typep.49Configuring Universal paper settingsp.49Loading the standard 250-sheet tray and optional 550-sheet trayp.50Loading the 650-sheet duo drawerp.53Using the multipurpose feederp.54Using the manual feederp.56Paper and specialty media guidep.58Paper guidelinesp.58Paper characteristicsp.58Unacceptable paperp.59Selecting paperp.59Selecting preprinted forms and letterheadp.59Storing paperp.60Supported paper sizes, types, and weightsp.60Paper sizes supported by the printerp.60Paper types supported by the printerp.61Paper types and weights supported by the printerp.62Paper capacitiesp.64Printingp.65Printing a documentp.65Printing on specialty mediap.65Tips on using letterheadp.65Tips on using transparenciesp.67Tips on using envelopesp.67Tips on using paper labelsp.68Tips on using card stockp.68Printing from a flash drivep.69Supported flash drives and file typesp.70Printing photos from a PictBridge-enabled digital camerap.71Printing information pagesp.71Printing a font sample listp.71Printing a directory listp.72Printing the print quality test pagesp.72Canceling a print jobp.72Canceling a print job from the printer control panelp.72Canceling a print job from the computerp.72Copyingp.74Making copiesp.74Making a quick copyp.74Copying using the ADFp.74Copying using the scanner glassp.75Copying photosp.75Copying on specialty mediap.75Copying to transparenciesp.75Copying to letterheadp.76Customizing copy settingsp.76Copying from one size to anotherp.76Making copies using paper from a selected trayp.77Copying on both sides of the paper (duplexing)p.77Reducing or enlarging copiesp.78Making a copy lighter or darkerp.78Adjusting copy qualityp.79Collating copiesp.79Placing separator sheets between copiesp.80Copying multiple pages onto a single sheetp.80Canceling a copy jobp.81Improving copy qualityp.81E-mailingp.82Getting ready to e-mailp.82Setting up the e-mail functionp.82Setting up the address bookp.83Creating an e-mail shortcut using the Embedded Web Serverp.83E-mailing a documentp.83Sending an e-mail using the keypadp.83Sending an e-mail using a shortcut numberp.84Sending an e-mail using the address bookp.85Canceling an e-mailp.85Faxingp.86Getting the printer ready to faxp.86Initial fax setupp.86Choosing a fax connectionp.87Connecting to an analog telephone linep.88Connecting to a DSL servicep.89Connecting to a PBX or ISDN systemp.89Connecting to a Distinctive Ring Servicep.90Connecting a telephone or answering machine to the same telephone linep.90Connecting to an adapter for your country or regionp.91Connecting to a computer with a modemp.97Setting the outgoing fax name and numberp.99Setting the date and timep.99Turning daylight saving time on or offp.99Sending a faxp.100Sending a fax using the printer control panelp.100Sending a fax using the computerp.100Creating shortcutsp.101Creating a fax destination shortcut using the Embedded Web Serverp.101Creating a fax destination shortcut using the printer control panelp.101Using shortcuts and the address bookp.102Using fax destination shortcutsp.102Using the address bookp.102Customizing fax settingsp.103Changing the fax resolutionp.103Making a fax lighter or darkerp.103Sending a fax at a scheduled timep.103Viewing a fax logp.104Canceling an outgoing faxp.104Understanding fax optionsp.105Original Sizep.105Contentp.105Sides (Duplex)p.105Resolutionp.105Darknessp.105Improving fax qualityp.106Forwarding a faxp.106Scanning to an FTP addressp.107Scanning to an FTP addressp.107Scanning to an FTP address using the keypadp.107Scanning to an FTP address using a shortcut numberp.108Creating an FTP shortcut using the Embedded Web Serverp.108Scanning to a computer or USB flash memory devicep.109Scanning to a computerp.109Scanning to a USB flash memory devicep.110Understanding scan to computer optionsp.111Sides (Duplex)p.111Darknessp.111Improving scan qualityp.111Using the Scan Center softwarep.111Understanding the Scan Center featuresp.111Using the ScanBack utilityp.112Using the ScanBack Utilityp.112Clearing jamsp.113Avoiding jamsp.113Understanding jam numbers and locationsp.114200 paper jamp.115201 paper jamp.115202 paper jamp.116230 paper jamp.118235 paper jamp.118242 and 243 paper jamsp.118250 paper jamp.119290 paper jamp.119Understanding printer menusp.121Menus listp.121Supplies menup.122Paper menup.122Default Source menup.122Size/Type menup.123Paper Texture menup.125Paper Weight menup.127Paper Loading menup.128Custom Types menup.129Custom Scan Sizes menup.130Universal Setup menup.130Reports menup.131Reports menup.131Network/Portsp.132Active NIC menup.132Network menup.132Wireless menup.134USB menup.134Settings menup.136General Settings menup.136Copy Settings menup.139Fax Settings menup.141Flash Drive menup.147Flash Drive menup.147Print Settingsp.150Setup menup.150Finishing menup.150Quality menup.152Utilities menup.154PDF menup.155PostScript menup.155PCL Emul menup.155Image menup.158PictBridge menup.158Set Date and Timep.159Understanding printer messagesp.162List of status and error messagesp.162Access USB after scanp.162Access USB nowp.162Busyp.162Calibratingp.162Call completep.162Cancel not availablep.162Cancelingp.162Check Config IDp.162Clock batteryp.162Close doorp.163<color> Lowp.163Dialingp.163DO NOT TOUCHp.163Fax completep.163Fax failedp.163Flushing bufferp.163File corruptp.163Hex Tracep.163Imaging Kitp.163Incoming callp.164Insert Tray <x>p.164Invalid Engine Codep.164Invalid Network Codep.164LADP connection errorp.164Line busyp.164Load <src> with <x>p.164Load single sheet feeder with <x>p.164Maintenancep.165Memory full, cannot send faxesp.165Menus disabledp.165No analog phone linep.165No answerp.165No dial tonep.165No recognized file typesp.165PC Kit Life Warningp.165Phone in Usep.166Picture too largep.166Power Saverp.166Printing errorp.166Programming Codep.166Reading datap.166Reading error (Remove drive)p.166Readyp.166Receiving pXXp.167Reload printed pages in Tray <x>p.167Remote Management Activep.167Remove originals from the scanner ADFp.167Remove packaging materialp.167Remove paper from standard output binp.167Replace <color> cartridgep.167Replace PC Kitp.167Scan Document Too Longp.167Scan to USB failedp.167Scanner ADF Cover Openp.168Sending pXXp.168Standard Exit Bin Fullp.168Tray <x> Emptyp.168Tray <x> Lowp.168Tray <x> Missingp.168Unsupported USB device, please removep.168Unsupported USB hub, please removep.168Unsupported Modep.168USB drive disabledp.169Use camera controls to printp.169Waitingp.169Waiting, too many eventsp.16930.yy <color> cartridge missingp.16931.yy Defective <color> Cartridgep.16931 Defective Imaging Kitp.16932.yy Replace Unsupported <color> Cartridgep.16934 Short paperp.16935 Insufficient memory to support Resource Save featurep.17037 Insufficient memory to collate jobp.17038 Memory Fullp.17039 Complex page, some data may not have printedp.17040 <color> Invalid refill, change cartridgep.17050 PPDS Font Errorp.17051 Defective flash detectedp.17052 Not enough free space in flash memory for resourcesp.17153 Unformatted flash detectedp.17154 Network <x> Software Errorp.17156 Standard USB Port Disabledp.17158 Too many flash options installedp.17158 Too many trays attachedp.17258 Input config errorp.17259 Incompatible tray <x>p.17282 Replace waste toner boxp.17282.yy Waste toner box missingp.17288.yy <color> Cartridge is lowp.17288.yy Replace <color> Cartridgep.172150 displayedp.173200.yy Paper jam <area name>p.173201.yy Paper jam <area name>p.173202.yy Paper jam <area name>p.173230.yy Paper jam <area name>p.173235 Paper Jam Check Duplexp.17324x Paper Jam Check Tray <x>p.174250.yy Paper jam <area name>p.174290–292 ADF Scanning Jamsp.174293 Paper Missingp.174293.02 Flatbed Cover Openp.174294 ADF Jamp.175840.01 Scanner Disabledp.175840.02 Scanner Auto Disabledp.175940.01p.175941.01p.175942.01p.175943.01p.176940.02p.176941.02p.176942.02p.176943.02p.176900–999 Service <message>p.176Maintaining the printerp.177Storing suppliesp.177Checking the status of suppliesp.177Checking the status of supplies from the printer control panelp.177Checking the status of supplies from a network computerp.177Ordering suppliesp.178Ordering toner cartridgesp.178Ordering imaging kitsp.179Ordering a waste toner bottlep.179Replacing suppliesp.180Replacing the waste toner bottlep.180Replacing a black imaging kitp.183Replacing a black and color imaging kitp.189Replacing a toner cartridgep.195Replacing a developer unitp.197Cleaning the exterior of the printerp.203Cleaning the scanner glassp.204Moving the printerp.204Before moving the printerp.204Moving the printer to another locationp.205Shipping the printerp.205Administrative supportp.206Finding advanced networking and administrator informationp.206Restoring the factory default settingsp.206Using the Embedded Web Serverp.206Setting up e-mail alertsp.207Viewing reportsp.207Troubleshootingp.208Solving basic printer problemsp.208Solving printing problemsp.208Multiple-language PDFs do not printp.208Printer control panel display is blank or displays only diamondsp.208Error message about reading USB drive appearsp.208Jobs do not printp.209Make sure the printer is ready to printp.209Check to see if the standard exit bin is fullp.209Check to see if the paper tray is emptyp.209Make sure the printer is connected to the networkp.209Make sure you are using a recommended USB or Ethernet cablep.209Make sure printer cables are securely connectedp.209Job takes longer than expected to printp.209Reduce the complexity of the print jobp.209Change the Page Protect setting to Offp.209Job prints from the wrong tray or on the wrong paperp.210Check the Paper Type settingp.210Incorrect or strange characters printp.210Tray linking does not workp.210Load the same size and type of paperp.210Use the same Paper Size and Paper Type settingsp.210Large jobs do not collatep.210Make sure Collate is set to Onp.210Reduce the complexity of the print jobp.210Make sure the printer has enough memoryp.211Unexpected page breaks occurp.211Solving copy problemsp.211Copier does not respondp.211Check the display for error messagesp.211Check the powerp.211Scanner unit does not closep.211Poor copy qualityp.212Check the display for error messagesp.212The toner may be lowp.212The scanner glass may be dirtyp.212The copy is too light or too darkp.212Check the quality of the original documentp.212Check the document placementp.213Unwanted toner is in the backgroundp.213Patterns (moiré) appear in the outputp.213Text is light or disappearingp.213The output appears washed out or overexposedp.213Partial document or photo copiesp.213Check the document placementp.213Check the Paper Size settingp.213Solving scanner problemsp.213Checking an unresponsive scannerp.213Scan was not successfulp.214Check the cable connectionsp.214An error may have occurred in the programp.214Scanning takes too long or freezes the computerp.214Other software programs may be interfering with scanningp.214The scan resolution may be set too highp.214Poor scanned image qualityp.214Check the display for error messagesp.214The scanner glass may be dirtyp.214Adjust the scan resolutionp.214Check the quality of the original documentp.214Check the document placementp.215Partial document or photo scansp.215Check the document placementp.215Check the paper size settingp.215Cannot scan from a computerp.215Check the display for error messagesp.215Check the powerp.215Check the cable connectionsp.215Solving fax problemsp.215Caller ID is not shownp.215Cannot send or receive a faxp.216Check the display for error messagesp.216Check the powerp.216Check the printer connectionsp.216Check the telephone wall jackp.216Review this digital phone service checklistp.216Check for a dial tonep.216Temporarily disconnect other equipmentp.217Check for jamsp.217Temporarily disable Call Waitingp.217Voice Mail service may be interfering with the fax transmissionp.217The printer memory may be fullp.217Can send but not receive faxesp.217Check to see if the paper tray is emptyp.217Check the ring count delay settingsp.217The toner may be lowp.218Can receive but not send faxesp.218Make sure the printer is in Fax modep.218Make sure the document is loaded properlyp.218Make sure the shortcut number is set up properlyp.218Received fax has poor print qualityp.218Re-send the documentp.218The toner may be lowp.218Make sure the fax transmission speed is not set too highp.218Blocking junk faxesp.219Solving option problemsp.219Option does not operate correctly or quits after it is installedp.219Reset the printerp.219Check to see if the option is connected to the printerp.219Make sure the option is installed correctlyp.219Make sure the option is selectedp.220Drawersp.220Make sure the paper is loaded correctlyp.220Reset the printerp.220Multipurpose feederp.220Check the multipurpose feederp.220Clear any jamsp.220Check the power cord connectionp.220Check the paperp.220Check the paper guidesp.220Check for service messagesp.221Memory cardp.221Solving paper feed problemsp.221Paper frequently jamsp.221Check the paperp.221Make sure there is not too much paper in the paper trayp.221Check the paper guidesp.221The paper may have absorbed moisture due to high humidityp.221Paper jam message remains after jam is clearedp.221Page that jammed does not reprint after you clear the jamp.221Solving print quality problemsp.222Blank pagesp.222Packing material may be on the print cartridgep.222The toner may be lowp.222Characters have jagged or uneven edgesp.222Clipped imagesp.223Check the guidesp.223Check the paper size settingp.223Dark linesp.223Gray backgroundp.223Check the Toner Darkness settingp.223Incorrect marginsp.224Check the paper guidesp.224Check the paper size settingp.224Light colored line, white line, or incorrectly colored linep.224A toner cartridge may be defectivep.224The imaging kit may be defectivep.224Paper curlp.225Check the Paper Type settingp.225Has the paper absorbed moisture due to high humidity?p.225Print irregularitiesp.225The paper may have absorbed moisture due to high humidityp.225Check the paper type settingp.225Check the paperp.225The toner may be lowp.225The fuser may be worn or defectivep.225Repeating defectsp.226Repeating marks occur multiple times on a pagep.226Skewed printp.226Check the paper guidesp.226Check the paperp.226Print is too lightp.226Calibrate the colorp.226Check the darkness, brightness, and contrast settingsp.227The paper may have absorbed moisture due to high humidityp.227Check the paperp.227Check the Paper Type settingp.227Make sure Color Saver is set to Offp.227A toner cartridge may be lowp.227A toner cartridge may be defectivep.227The imaging kit may be worn or defectivep.227Print is too darkp.228Calibrate the colorp.228Check the darkness, brightness, and contrast settingsp.228A toner cartridge may be defectivep.228Solid color pagesp.229Make sure the print cartridge is properly installedp.229The print cartridge may be defective or low on tonerp.229Toner fog or background shading appears on the pagep.229The imaging kit may be worn or defectivep.229Is there toner in the paper path?p.229Toner rubs offp.230Check the paper type settingp.230Check the Paper Texture settingp.230Toner specksp.230The print cartridge may be defectivep.230There is toner in the paper pathp.230Transparency print quality is poorp.231Check the transparenciesp.231Check the paper type settingp.231Uneven print densityp.231Solving color quality problemsp.232Color misregistrationp.232A toner cartridge may be defectivep.232Calibrate the colorp.232FAQ about color printingp.232Embedded Web Server does not openp.235Check the network connectionsp.235Check the network settingsp.235Contacting Customer Supportp.235Noticesp.236Product informationp.236Edition noticep.236GOVERNMENT END USERSp.236Trademarksp.237Federal Communications Commission (FCC) compliance information statementp.237Modular component noticep.237Noise emission levelsp.238Waste from Electrical and Electronic Equipment (WEEE) directivep.238Static sensitivity noticep.238ENERGY STARp.239Mercury statementp.239Temperature informationp.239Laser noticep.239Laser advisory labelp.239Power consumptionp.240Product power consumptionp.240Power Saverp.240Off modep.241Total energy usagep.241Notice to users of the US telephone network: FCC requirementsp.241Notice to users of the Canadian telephone networkp.242Notice to users of the New Zealand telephone networkp.243South Africa telecommunications noticep.243European Community (EC) directives conformityp.244Regulatory notices for wireless productsp.244Exposure to radio frequency radiationp.245Industry Canada (Canada)p.245Notice to users in the European Unionp.246STATEMENT OF LIMITED WARRANTY FOR LEXMARK LASER PRINTERS, LEXMARK LED PRINTERS, AND LEXMARK MULTIFUN ...p.248Patent acknowledgmentp.250Indexp.251
Page 1 of the Lexmark 356 user manual — November 2012 www.lexmark.com
Page 1 · click to enlarge
Page 1

X54x Series

User's Guide

November 2012 www.lexmark.com

Machine type: 7525 Model numbers: 131, 133, 138, 332, 333, 336, 337, 352, 356, 382, 383, 386, 387

Page 2 of the Lexmark 356 user manual — Table of Contents
Page 2 · Contents
Contents

Contents

Contentsp.2Safety informationp.10Learning about the printerp.12Finding information about the printerp.12Selecting a location for the printerp.13Printer configurationsp.15Basic functions of the scannerp.15Understanding the ADF and scanner glassp.16Understanding the printer control panelp.16Additional printer setupp.22Installing internal optionsp.22Available optionsp.22Accessing the system board to install internal optionsp.23Installing a memory cardp.25Installing a flash memory cardp.27Installing hardware optionsp.29Installing an optional tray or drawerp.29Attaching cablesp.30Verifying printer setupp.32Printing menu settings pagesp.32Printing a network setup pagep.32Setting up the printer softwarep.33Installing the printer softwarep.33Updating available options in the printer driverp.33Setting up wireless printingp.34Preparing to set up the printer on a wireless networkp.34Installing the printer on a wireless network (Windows)p.35Installing the printer on a wireless network (Macintosh)p.37Installing the printer on an Ethernet networkp.40Minimizing your printer's environmental impactp.43Saving paper and tonerp.43Using recycled paper and other office papersp.43Conserving suppliesp.44Saving energyp.45Using Eco-Modep.45Reducing printer noisep.45Adjusting Power Saverp.46Recyclingp.47Recycling Lexmark productsp.47Recycling Lexmark packagingp.47Returning Lexmark cartridges for reuse or recyclingp.47Loading paper and specialty mediap.48Linking and unlinking traysp.48Linking traysp.48Unlinking traysp.48Assigning a Custom Type namep.48Setting the Paper Size and Paper Typep.49Configuring Universal paper settingsp.49Loading the standard 250-sheet tray and optional 550-sheet trayp.50Loading the 650-sheet duo drawerp.53Using the multipurpose feederp.54Using the manual feederp.56Paper and specialty media guidep.58Paper guidelinesp.58Paper characteristicsp.58Unacceptable paperp.59Selecting paperp.59Selecting preprinted forms and letterheadp.59Storing paperp.60Supported paper sizes, types, and weightsp.60Paper sizes supported by the printerp.60Paper types supported by the printerp.61Paper types and weights supported by the printerp.62Paper capacitiesp.64Printingp.65Printing a documentp.65Printing on specialty mediap.65Tips on using letterheadp.65Tips on using transparenciesp.67Tips on using envelopesp.67Tips on using paper labelsp.68Tips on using card stockp.68Printing from a flash drivep.69Supported flash drives and file typesp.70Printing photos from a PictBridge-enabled digital camerap.71Printing information pagesp.71Printing a font sample listp.71Printing a directory listp.72Printing the print quality test pagesp.72Canceling a print jobp.72Canceling a print job from the printer control panelp.72Canceling a print job from the computerp.72Copyingp.74Making copiesp.74Making a quick copyp.74Copying using the ADFp.74Copying using the scanner glassp.75Copying photosp.75Copying on specialty mediap.75Copying to transparenciesp.75Copying to letterheadp.76Customizing copy settingsp.76Copying from one size to anotherp.76Making copies using paper from a selected trayp.77Copying on both sides of the paper (duplexing)p.77Reducing or enlarging copiesp.78Making a copy lighter or darkerp.78Adjusting copy qualityp.79Collating copiesp.79Placing separator sheets between copiesp.80Copying multiple pages onto a single sheetp.80Canceling a copy jobp.81Improving copy qualityp.81E-mailingp.82Getting ready to e-mailp.82Setting up the e-mail functionp.82Setting up the address bookp.83Creating an e-mail shortcut using the Embedded Web Serverp.83E-mailing a documentp.83Sending an e-mail using the keypadp.83Sending an e-mail using a shortcut numberp.84Sending an e-mail using the address bookp.85Canceling an e-mailp.85Faxingp.86Getting the printer ready to faxp.86Initial fax setupp.86Choosing a fax connectionp.87Connecting to an analog telephone linep.88Connecting to a DSL servicep.89Connecting to a PBX or ISDN systemp.89Connecting to a Distinctive Ring Servicep.90Connecting a telephone or answering machine to the same telephone linep.90Connecting to an adapter for your country or regionp.91Connecting to a computer with a modemp.97Setting the outgoing fax name and numberp.99Setting the date and timep.99Turning daylight saving time on or offp.99Sending a faxp.100Sending a fax using the printer control panelp.100Sending a fax using the computerp.100Creating shortcutsp.101Creating a fax destination shortcut using the Embedded Web Serverp.101Creating a fax destination shortcut using the printer control panelp.101Using shortcuts and the address bookp.102Using fax destination shortcutsp.102Using the address bookp.102Customizing fax settingsp.103Changing the fax resolutionp.103Making a fax lighter or darkerp.103Sending a fax at a scheduled timep.103Viewing a fax logp.104Canceling an outgoing faxp.104Understanding fax optionsp.105Original Sizep.105Contentp.105Sides (Duplex)p.105Resolutionp.105Darknessp.105Improving fax qualityp.106Forwarding a faxp.106Scanning to an FTP addressp.107Scanning to an FTP addressp.107Scanning to an FTP address using the keypadp.107Scanning to an FTP address using a shortcut numberp.108Creating an FTP shortcut using the Embedded Web Serverp.108Scanning to a computer or USB flash memory devicep.109Scanning to a computerp.109Scanning to a USB flash memory devicep.110Understanding scan to computer optionsp.111Sides (Duplex)p.111Darknessp.111Improving scan qualityp.111Using the Scan Center softwarep.111Understanding the Scan Center featuresp.111Using the ScanBack utilityp.112Using the ScanBack Utilityp.112Clearing jamsp.113Avoiding jamsp.113Understanding jam numbers and locationsp.114200 paper jamp.115201 paper jamp.115202 paper jamp.116230 paper jamp.118235 paper jamp.118242 and 243 paper jamsp.118250 paper jamp.119290 paper jamp.119Understanding printer menusp.121Menus listp.121Supplies menup.122Paper menup.122Default Source menup.122Size/Type menup.123Paper Texture menup.125Paper Weight menup.127Paper Loading menup.128Custom Types menup.129Custom Scan Sizes menup.130Universal Setup menup.130Reports menup.131Reports menup.131Network/Portsp.132Active NIC menup.132Network menup.132Wireless menup.134USB menup.134Settings menup.136General Settings menup.136Copy Settings menup.139Fax Settings menup.141Flash Drive menup.147Flash Drive menup.147Print Settingsp.150Setup menup.150Finishing menup.150Quality menup.152Utilities menup.154PDF menup.155PostScript menup.155PCL Emul menup.155Image menup.158PictBridge menup.158Set Date and Timep.159Understanding printer messagesp.162List of status and error messagesp.162Access USB after scanp.162Access USB nowp.162Busyp.162Calibratingp.162Call completep.162Cancel not availablep.162Cancelingp.162Check Config IDp.162Clock batteryp.162Close doorp.163<color> Lowp.163Dialingp.163DO NOT TOUCHp.163Fax completep.163Fax failedp.163Flushing bufferp.163File corruptp.163Hex Tracep.163Imaging Kitp.163Incoming callp.164Insert Tray <x>p.164Invalid Engine Codep.164Invalid Network Codep.164LADP connection errorp.164Line busyp.164Load <src> with <x>p.164Load single sheet feeder with <x>p.164Maintenancep.165Memory full, cannot send faxesp.165Menus disabledp.165No analog phone linep.165No answerp.165No dial tonep.165No recognized file typesp.165PC Kit Life Warningp.165Phone in Usep.166Picture too largep.166Power Saverp.166Printing errorp.166Programming Codep.166Reading datap.166Reading error (Remove drive)p.166Readyp.166Receiving pXXp.167Reload printed pages in Tray <x>p.167Remote Management Activep.167Remove originals from the scanner ADFp.167Remove packaging materialp.167Remove paper from standard output binp.167Replace <color> cartridgep.167Replace PC Kitp.167Scan Document Too Longp.167Scan to USB failedp.167Scanner ADF Cover Openp.168Sending pXXp.168Standard Exit Bin Fullp.168Tray <x> Emptyp.168Tray <x> Lowp.168Tray <x> Missingp.168Unsupported USB device, please removep.168Unsupported USB hub, please removep.168Unsupported Modep.168USB drive disabledp.169Use camera controls to printp.169Waitingp.169Waiting, too many eventsp.16930.yy <color> cartridge missingp.16931.yy Defective <color> Cartridgep.16931 Defective Imaging Kitp.16932.yy Replace Unsupported <color> Cartridgep.16934 Short paperp.16935 Insufficient memory to support Resource Save featurep.17037 Insufficient memory to collate jobp.17038 Memory Fullp.17039 Complex page, some data may not have printedp.17040 <color> Invalid refill, change cartridgep.17050 PPDS Font Errorp.17051 Defective flash detectedp.17052 Not enough free space in flash memory for resourcesp.17153 Unformatted flash detectedp.17154 Network <x> Software Errorp.17156 Standard USB Port Disabledp.17158 Too many flash options installedp.17158 Too many trays attachedp.17258 Input config errorp.17259 Incompatible tray <x>p.17282 Replace waste toner boxp.17282.yy Waste toner box missingp.17288.yy <color> Cartridge is lowp.17288.yy Replace <color> Cartridgep.172150 displayedp.173200.yy Paper jam <area name>p.173201.yy Paper jam <area name>p.173202.yy Paper jam <area name>p.173230.yy Paper jam <area name>p.173235 Paper Jam Check Duplexp.17324x Paper Jam Check Tray <x>p.174250.yy Paper jam <area name>p.174290–292 ADF Scanning Jamsp.174293 Paper Missingp.174293.02 Flatbed Cover Openp.174294 ADF Jamp.175840.01 Scanner Disabledp.175840.02 Scanner Auto Disabledp.175940.01p.175941.01p.175942.01p.175943.01p.176940.02p.176941.02p.176942.02p.176943.02p.176900–999 Service <message>p.176Maintaining the printerp.177Storing suppliesp.177Checking the status of suppliesp.177Checking the status of supplies from the printer control panelp.177Checking the status of supplies from a network computerp.177Ordering suppliesp.178Ordering toner cartridgesp.178Ordering imaging kitsp.179Ordering a waste toner bottlep.179Replacing suppliesp.180Replacing the waste toner bottlep.180Replacing a black imaging kitp.183Replacing a black and color imaging kitp.189Replacing a toner cartridgep.195Replacing a developer unitp.197Cleaning the exterior of the printerp.203Cleaning the scanner glassp.204Moving the printerp.204Before moving the printerp.204Moving the printer to another locationp.205Shipping the printerp.205Administrative supportp.206Finding advanced networking and administrator informationp.206Restoring the factory default settingsp.206Using the Embedded Web Serverp.206Setting up e-mail alertsp.207Viewing reportsp.207Troubleshootingp.208Solving basic printer problemsp.208Solving printing problemsp.208Multiple-language PDFs do not printp.208Printer control panel display is blank or displays only diamondsp.208Error message about reading USB drive appearsp.208Jobs do not printp.209Make sure the printer is ready to printp.209Check to see if the standard exit bin is fullp.209Check to see if the paper tray is emptyp.209Make sure the printer is connected to the networkp.209Make sure you are using a recommended USB or Ethernet cablep.209Make sure printer cables are securely connectedp.209Job takes longer than expected to printp.209Reduce the complexity of the print jobp.209Change the Page Protect setting to Offp.209Job prints from the wrong tray or on the wrong paperp.210Check the Paper Type settingp.210Incorrect or strange characters printp.210Tray linking does not workp.210Load the same size and type of paperp.210Use the same Paper Size and Paper Type settingsp.210Large jobs do not collatep.210Make sure Collate is set to Onp.210Reduce the complexity of the print jobp.210Make sure the printer has enough memoryp.211Unexpected page breaks occurp.211Solving copy problemsp.211Copier does not respondp.211Check the display for error messagesp.211Check the powerp.211Scanner unit does not closep.211Poor copy qualityp.212Check the display for error messagesp.212The toner may be lowp.212The scanner glass may be dirtyp.212The copy is too light or too darkp.212Check the quality of the original documentp.212Check the document placementp.213Unwanted toner is in the backgroundp.213Patterns (moiré) appear in the outputp.213Text is light or disappearingp.213The output appears washed out or overexposedp.213Partial document or photo copiesp.213Check the document placementp.213Check the Paper Size settingp.213Solving scanner problemsp.213Checking an unresponsive scannerp.213Scan was not successfulp.214Check the cable connectionsp.214An error may have occurred in the programp.214Scanning takes too long or freezes the computerp.214Other software programs may be interfering with scanningp.214The scan resolution may be set too highp.214Poor scanned image qualityp.214Check the display for error messagesp.214The scanner glass may be dirtyp.214Adjust the scan resolutionp.214Check the quality of the original documentp.214Check the document placementp.215Partial document or photo scansp.215Check the document placementp.215Check the paper size settingp.215Cannot scan from a computerp.215Check the display for error messagesp.215Check the powerp.215Check the cable connectionsp.215Solving fax problemsp.215Caller ID is not shownp.215Cannot send or receive a faxp.216Check the display for error messagesp.216Check the powerp.216Check the printer connectionsp.216Check the telephone wall jackp.216Review this digital phone service checklistp.216Check for a dial tonep.216Temporarily disconnect other equipmentp.217Check for jamsp.217Temporarily disable Call Waitingp.217Voice Mail service may be interfering with the fax transmissionp.217The printer memory may be fullp.217Can send but not receive faxesp.217Check to see if the paper tray is emptyp.217Check the ring count delay settingsp.217The toner may be lowp.218Can receive but not send faxesp.218Make sure the printer is in Fax modep.218Make sure the document is loaded properlyp.218Make sure the shortcut number is set up properlyp.218Received fax has poor print qualityp.218Re-send the documentp.218The toner may be lowp.218Make sure the fax transmission speed is not set too highp.218Blocking junk faxesp.219Solving option problemsp.219Option does not operate correctly or quits after it is installedp.219Reset the printerp.219Check to see if the option is connected to the printerp.219Make sure the option is installed correctlyp.219Make sure the option is selectedp.220Drawersp.220Make sure the paper is loaded correctlyp.220Reset the printerp.220Multipurpose feederp.220Check the multipurpose feederp.220Clear any jamsp.220Check the power cord connectionp.220Check the paperp.220Check the paper guidesp.220Check for service messagesp.221Memory cardp.221Solving paper feed problemsp.221Paper frequently jamsp.221Check the paperp.221Make sure there is not too much paper in the paper trayp.221Check the paper guidesp.221The paper may have absorbed moisture due to high humidityp.221Paper jam message remains after jam is clearedp.221Page that jammed does not reprint after you clear the jamp.221Solving print quality problemsp.222Blank pagesp.222Packing material may be on the print cartridgep.222The toner may be lowp.222Characters have jagged or uneven edgesp.222Clipped imagesp.223Check the guidesp.223Check the paper size settingp.223Dark linesp.223Gray backgroundp.223Check the Toner Darkness settingp.223Incorrect marginsp.224Check the paper guidesp.224Check the paper size settingp.224Light colored line, white line, or incorrectly colored linep.224A toner cartridge may be defectivep.224The imaging kit may be defectivep.224Paper curlp.225Check the Paper Type settingp.225Has the paper absorbed moisture due to high humidity?p.225Print irregularitiesp.225The paper may have absorbed moisture due to high humidityp.225Check the paper type settingp.225Check the paperp.225The toner may be lowp.225The fuser may be worn or defectivep.225Repeating defectsp.226Repeating marks occur multiple times on a pagep.226Skewed printp.226Check the paper guidesp.226Check the paperp.226Print is too lightp.226Calibrate the colorp.226Check the darkness, brightness, and contrast settingsp.227The paper may have absorbed moisture due to high humidityp.227Check the paperp.227Check the Paper Type settingp.227Make sure Color Saver is set to Offp.227A toner cartridge may be lowp.227A toner cartridge may be defectivep.227The imaging kit may be worn or defectivep.227Print is too darkp.228Calibrate the colorp.228Check the darkness, brightness, and contrast settingsp.228A toner cartridge may be defectivep.228Solid color pagesp.229Make sure the print cartridge is properly installedp.229The print cartridge may be defective or low on tonerp.229Toner fog or background shading appears on the pagep.229The imaging kit may be worn or defectivep.229Is there toner in the paper path?p.229Toner rubs offp.230Check the paper type settingp.230Check the Paper Texture settingp.230Toner specksp.230The print cartridge may be defectivep.230There is toner in the paper pathp.230Transparency print quality is poorp.231Check the transparenciesp.231Check the paper type settingp.231Uneven print densityp.231Solving color quality problemsp.232Color misregistrationp.232A toner cartridge may be defectivep.232Calibrate the colorp.232FAQ about color printingp.232Embedded Web Server does not openp.235Check the network connectionsp.235Check the network settingsp.235Contacting Customer Supportp.235Noticesp.236Product informationp.236Edition noticep.236GOVERNMENT END USERSp.236Trademarksp.237Federal Communications Commission (FCC) compliance information statementp.237Modular component noticep.237Noise emission levelsp.238Waste from Electrical and Electronic Equipment (WEEE) directivep.238Static sensitivity noticep.238ENERGY STARp.239Mercury statementp.239Temperature informationp.239Laser noticep.239Laser advisory labelp.239Power consumptionp.240Product power consumptionp.240Power Saverp.240Off modep.241Total energy usagep.241Notice to users of the US telephone network: FCC requirementsp.241Notice to users of the Canadian telephone networkp.242Notice to users of the New Zealand telephone networkp.243South Africa telecommunications noticep.243European Community (EC) directives conformityp.244Regulatory notices for wireless productsp.244Exposure to radio frequency radiationp.245Industry Canada (Canada)p.245Notice to users in the European Unionp.246STATEMENT OF LIMITED WARRANTY FOR LEXMARK LASER PRINTERS, LEXMARK LED PRINTERS, AND LEXMARK MULTIFUN ...p.248Patent acknowledgmentp.250Indexp.251
Page 10 of the Lexmark 356 user manual — Safety information
Page 10 · click to enlarge
Page 10

Safety information

Connect the power cord to a properly grounded electrical outlet that is near the product and easily accessible.

Do not place or use this product near water or wet locations.

This product uses a printing process that heats the print media, and the heat may cause the media to release emissions. You must understand the section in your operating instructions that discusses the guidelines for selecting print media to avoid the possibility of harmful emissions.

Use care when you replace a lithium battery.

  • CAUTION—POTENTIAL INJURY: Before moving the printer, follow these guidelines to avoid personal injury or printer damage:
  • Turn the printer off using the power switch, and then unplug the power cord from the electrical outlet.
  • Disconnect all cords and cables from the printer before moving it.
  • Lift the printer off the optional tray, and then set it aside instead of trying to lift the tray and printer at the same time.

Use only the power cord provided with this product or the manufacturer's authorized replacement.

Use only the telecommunications (RJ‑11) cord provided with this product or a 26 AWG or larger replacement when connecting this product to the public switched telephone network.

CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

This product is designed, tested, and approved to meet strict global safety standards with the use of specific manufacturer's components. The safety features of some parts may not always be obvious. The manufacturer is not responsible for the use of other replacement parts.

CAUTION—POTENTIAL INJURY: Do not twist, bind, crush, or place heavy objects on the power cord. Do not subject the power cord to abrasion or stress. Do not pinch the power cord between objects such as furniture and walls. If the power cord is misused, a risk of fire or electrical shock results. Inspect the power cord regularly for signs of misuse. Remove the power cord from the electrical outlet before inspecting it.

Safety information 10

Page 11 of the Lexmark 356 user manual — Safety information
Page 11 · click to enlarge
Page 11

Refer service or repairs, other than those described in the user documentation, to a professional service person.

SAVE THESE INSTRUCTIONS.

Safety information 11

Page 12 of the Lexmark 356 user manual — Learning about the printer
Page 12 · click to enlarge
Page 12

Learning about the printer 12

Learning about the printer

Finding information about the printer

What are you looking for?Find it here Initial setup instructions: • Connecting the printer • Installing the printer softwareSetup documentation—The setup documentation came with the printer and is also available at http://support.lexmark.com. Additional setup and instructions for using the printer: • Selecting and storing paper and specialty media • Loading paper • Configuring printer settings • Viewing and printing documents and photos • Setting up and using the printer software • Configuring the printer on a network • Caring for and maintaining the printer • Troubleshooting and solving problemsUser's Guide and Quick Reference Guide—The guides may be available on the Software and Documentation CD. For more information, visit http://support.lexmark.com. Instructions for: • Connecting the printer to an Ethernet network • Troubleshooting printer connection problemsNetworking Guide—Open the Software and Documentation CD, and then look for Printer and Software Documentation under the Pubs folder. From the list of publications, click the Networking Guide link. Help using the printer softwareWindows or Mac Help—Open a printer software program or application, and then click Help. ? Click to view context‑sensitive information. Notes: • Help is automatically installed with the printer software. • The printer software is located in the printer program folder or on the desktop, depending on your operating system.
Page 13 of the Lexmark 356 user manual — Selecting a location for the printer
Page 13 · click to enlarge
Page 13

Learning about the printer 13

What are you looking for? Find it here

The latest supplemental information, updates, and customer support:

Lexmark Support Web site— http://support.lexmark.com

  • Documentation
  • Driver downloads
  • Live chat support
  • E ‑ mail support
  • Voice support

Support telephone numbers and hours of operation for your country or region can be found on the Support Web site or on the printed warranty that came with your printer.

Record the following information (located on the store receipt and at the back of the printer), and have it ready when you contact customer support so that they may serve you faster:

  • Machine Type number
  • Serial number
  • Date purchased
  • Store where purchased

Warranty information Warranty information varies by country or region:

  • In the U.S. —See the Statement of Limited Warranty included with this printer, or at <a href="http://support.lexmark.com" rel="nofollow noopener" target="_blank">http://support.lexmark.com</a> .
  • In other countries and regions —See the printed warranty that came with your printer.

Selecting a location for the printer

When selecting a location for the printer, leave enough room to open trays, covers, and doors. If you plan to install any options, leave enough room for them also. It is important to:

  • Make sure airflow in the room meets the latest revision of the ASHRAE 62 standard.
  • Provide a flat, sturdy, and stable surface.
  • Keep the printer: – Away from the direct airflow of air conditioners, heaters, or ventilators – Free from direct sunlight, humidity extremes, or temperature fluctuations – Clean, dry, and free of dust
  • Allow the following recommended amount of space around the printer for proper ventilation:
Page 14 of the Lexmark 356 user manual — Selecting a location for the printer
Page 14 · click to enlarge
Page 14

Learning about the printer 14

Lexmark 356 — Selecting a location for the printer diagram (page 14)
Fig. 1 · Selecting a location for the printer

1 102 mm (4 in.)

2 508 mm (20 in.)

3 152 mm (6 in.)

4 76 mm (3 in.)

5 254 mm (10 in.)

Page 15 of the Lexmark 356 user manual — Basic functions of the scanner
Page 15 · click to enlarge
Page 15

Learning about the printer 15

Printer configurations

Basic models

Lexmark 356 — Basic models diagram (page 15)
Fig. 2 · Basic models
Lexmark 356 — Basic models diagram (page 15)
Fig. 3 · Basic models

8 650-sheet duo drawer with integrated multipurpose feeder (Tray 2)

Basic functions of the scanner

The scanner provides copy, fax, and scan-to-network capability for workgroups. You can:

  • Make quick copies, or change the settings on the printer control panel to perform specific copy jobs.
  • Send a fax using the printer control panel.
  • Send a fax to multiple fax destinations at the same time.
  • Scan documents and send them to your computer, an e-mail address, an FTP server, or a USB flash memory device.
Page 16 of the Lexmark 356 user manual — Understanding the printer control panel
Page 16 · click to enlarge
Page 16

Learning about the printer 16

Understanding the ADF and scanner glass

Lexmark 356 — Understanding the ADF and scanner glass diagram (page 16)
Fig. 4 · Understanding the ADF and scanner glass

Use the scanner glass for single pages, small items (such as postcards or photos), transparencies, photo paper, or thin media (such as magazine clippings).

You can use the ADF or the scanner glass to scan documents.

Using the ADF

The ADF can scan multiple pages including duplex (two‑sided) pages. When using the ADF:

  • Load the document into the ADF faceup, short edge first.
  • Load up to 50 sheets of plain paper into the ADF.
  • Scan sizes from 125 x 216 mm (4.9 x 8.5 in.) wide to 127 x 356 mm (5 x 14 in.) long.
  • Scan media weights from 52 to 120 g/m 2 (14 to 32 lb).
  • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF. Place these items on the scanner glass.

Using the scanner glass

The scanner glass can be used to scan or copy single pages or book pages. When using the scanner glass:

  • Place a document facedown on the scanner glass in the corner with the green arrow.
  • Scan or copy documents up to 215.9 x 355.6 mm (8.5 x 14 in.).
  • Copy books up to 12.7 mm (0.5 in.) thick.

Understanding the printer control panel

Page 17 of the Lexmark 356 user manual — Understanding the ADF and scanner glass
Page 17 · click to enlarge
Page 17

Learning about the printer 17

Lexmark 356 — Understanding the ADF and scanner glass diagram (page 17)
Fig. 5 · Understanding the ADF and scanner glass

Select a function such as Copy, Scan, Email, or Fax. Change default copy and scan settings such as the number of copies, duplex printing, copy options, and scaling. Use the address book when scanning to e‑mail.

2 Display area View scanning, copying, faxing, and printing options as well as status and error messages. Access the administration menus, start, stop, or cancel a print job.

3 Keypad area Enter numbers, letters, or symbols on the display, print using the USB flash memory device, or change the default fax settings.

Lexmark 356 — Understanding the ADF and scanner glass diagram (page 17)
Fig. 6 · Understanding the ADF and scanner glass
Lexmark 356 — Understanding the ADF and scanner glass diagram (page 17)
Fig. 7 · Understanding the ADF and scanner glass

1 Copy Press the Copy button to enter the copy function.

2 Content Press the Content button to enhance copy, scan, e‑mail, or fax quality. Choose from Text, Text/Photo, or Photo.

3 Copies Press the Copies button to enter the number of copies to print.

Page 18 of the Lexmark 356 user manual — Understanding the ADF and scanner glass
Page 18 · click to enlarge
Page 18

Learning about the printer 18

4 Scale Press the Scale button to change the size of the copied document to fit onto the currently selected paper size.

5 Options Press the Options button to change Original Size, Paper Source, Paper Saver, and Collate settings.

6 Address Book Press to enter the address book.

7 Darkness Press the Darkness button to adjust the current darkness settings.

8 Duplex 2-Sided Press the Duplex 2‑Sided button to scan or print on both sides of the paper.

9 Fax Press the Fax button to enter the fax function.

10 Scan/Email Press the Scan/Email button to enter the scan or scan to e‑mail function.

Lexmark 356 — Understanding the ADF and scanner glass diagram (page 18)
Fig. 8 · Understanding the ADF and scanner glass

5 7 9 10 6 8

Item Description

Page 19 of the Lexmark 356 user manual — Understanding the ADF and scanner glass
Page 19 · click to enlarge
Page 19

Learning about the printer 19

1 Menu Press to enter the administration menus.

2 Display View scanning, copying, faxing, and printing options as well as status and error messages

3 Stop/Cancel Press to stop all printer activity.

4 Color start Press to copy or scan in color.

5 Black start Press to copy or scan in black and white.

6 Right arrow Press to scroll right.

7 Select Press to accept menu selections and settings.

8 Left arrow Press to scroll left.

9 Indicator light Indicates the printer status:

  • Off —The power is off.
  • Blinking green —The printer is warming up, processing data, or printing.
  • Solid green —The printer is on, but idle.
  • Blinking red —Operator intervention is needed.

Item Description

Page 20 of the Lexmark 356 user manual — Understanding the ADF and scanner glass
Page 20 · click to enlarge
Page 20

Learning about the printer 20

Lexmark 356 — Understanding the ADF and scanner glass diagram (page 20)
Fig. 9 · Understanding the ADF and scanner glass

10 Back Press to return one screen at a time to the Ready screen.

Lexmark 356 — Understanding the ADF and scanner glass diagram (page 20)
Fig. 10 · Understanding the ADF and scanner glass
Lexmark 356 — Understanding the ADF and scanner glass diagram (page 20)
Fig. 11 · Understanding the ADF and scanner glass
  • 1 Redial/Pause
  • Press the Redial/Pause button to cause a twoor three-second dial pause in a fax number. In the Fax To: field, a Dial Pause is represented by a comma (,).
  • From the home screen, press the Redial/Pause button to redial a fax number.
  • The button functions only within the Fax menu or with fax functions. When outside of the Fax menu, fax function, or home screen, pressing the Redial/Pause button causes an error beep.
Page 21 of the Lexmark 356 user manual — #
Page 21 · click to enlarge
Page 21

Learning about the printer 21

3 Front USB port Lets you scan to a flash drive or print supported file types

Press # to enter the shortcut screen.

#

5 Hook Press to take the line off‑hook (like picking up a phone receiver). Press a second time to hang up the line.

6 Options Press the Options button to change Original Size, Broadcast, Delayed Send, and Cancel settings.

7 Resolution Press the Resolution button to select a dpi value for the scan.

Item Description · 4 Shortcuts

Page 22 of the Lexmark 356 user manual — Memory cards
Page 22 · click to enlarge
Page 22

Additional printer setup 22

Additional printer setup

Installing internal options

CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

You can customize your printer connectivity and memory capacity by adding optional cards. The instructions in this section explain how to install the available cards; you can also use them to locate a card for removal.

Available options

Memory cards

  • Printer memory
  • Flash memory
  • Font cards
Page 23 of the Lexmark 356 user manual — Accessing the system board to install internal options
Page 23 · click to enlarge
Page 23

Additional printer setup 23

Accessing the system board to install internal options

CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

1 Access the system board at the back of the printer.

2 Turn the screws counterclockwise to remove them.

Lexmark 356 — Accessing the system board to install internal options diagram (page 23)
Fig. 12 · Accessing the system board to install internal optio…

3 Gently pull the cover away from the printer, and then remove it.

Lexmark 356 — Accessing the system board to install internal options diagram (page 23)
Fig. 13 · Accessing the system board to install internal optio…
Page 24 of the Lexmark 356 user manual — Accessing the system board to install internal options
Page 24 · click to enlarge
Page 24

Additional printer setup 24

4 Locate the appropriate connector on the system board.

Lexmark 356 — Accessing the system board to install internal options diagram (page 24)
Fig. 14 · Accessing the system board to install internal optio…
Page 25 of the Lexmark 356 user manual — Installing a memory card
Page 25 · click to enlarge
Page 25

Additional printer setup 25

Installing a memory card

The system board has one connector for an optional memory card.

CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

1 Access the system board.

Lexmark 356 — Installing a memory card diagram (page 25)
Fig. 15 · Installing a memory card

2 Open both latches on the connector completely.

Lexmark 356 — Installing a memory card diagram (page 25)
Fig. 16 · Installing a memory card
Page 26 of the Lexmark 356 user manual — Installing a memory card
Page 26 · click to enlarge
Page 26

Additional printer setup 26

3 Unpack the memory card.

4 Align the notch on the memory card with the ridge on the connector.

5 Push the memory card straight into the connector until it snaps into place. Make sure each latch fits over the notch located on either side of the memory card.

Lexmark 356 — Installing a memory card diagram (page 26)
Fig. 17 · Installing a memory card

6 Reinstall the system board access cover.

Lexmark 356 — Installing a memory card diagram (page 26)
Fig. 18 · Installing a memory card

1 Notch · 2 Ridge

Page 27 of the Lexmark 356 user manual — Installing a flash memory card
Page 27 · click to enlarge
Page 27

Additional printer setup 27

Installing a flash memory card

CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

1 Access the system board.

Lexmark 356 — Installing a flash memory card diagram (page 27)
Fig. 19 · Installing a flash memory card

2 Unpack the memory card.

3 Holding the card by its sides, align the plastic pins on the card with the holes on the system board. This ensures the metal pins line up correctly as well.

Lexmark 356 — Installing a flash memory card diagram (page 27)
Fig. 20 · Installing a flash memory card
Page 28 of the Lexmark 356 user manual — Installing a flash memory card
Page 28 · click to enlarge
Page 28

Additional printer setup 28

4 Push the card firmly into place.

Lexmark 356 — Installing a flash memory card diagram (page 28)
Fig. 21 · Installing a flash memory card
  • The entire length of the connector on the card must touch and be flush against the system board.
  • Be careful not to damage the connectors.

5 Reinstall the system board cover.

Lexmark 356 — Installing a flash memory card diagram (page 28)
Fig. 22 · Installing a flash memory card

1 Plastic pins · 2 Metal pins

Page 29 of the Lexmark 356 user manual — Installing an optional tray or drawer
Page 29 · click to enlarge
Page 29

Additional printer setup 29

Installing hardware options

Installing an optional tray or drawer

The printer supports two additional input sources: an optional 550‑sheet tray and a 650‑sheet duo drawer (Tray 2) with an integrated multipurpose feeder.

CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

1 Unpack the optional 550‑sheet tray, and then remove all packing material and the dust cover.

2 Place the tray in the location chosen for the printer.

3 Align a 650‑sheet duo drawer with the optional 550‑sheet tray, and then lower it into place.

Lexmark 356 — Installing an optional tray or drawer diagram (page 29)
Fig. 23 · Installing an optional tray or drawer
Page 30 of the Lexmark 356 user manual — Attaching cables
Page 30 · click to enlarge
Page 30

Additional printer setup 30

4 Align the printer with the 650‑sheet duo drawer, and then lower the printer into place.

Lexmark 356 — Attaching cables diagram (page 30)
Fig. 24 · Attaching cables

5 Install the dust covers.

Attaching cables

  • 1 Connect the printer to a computer or a network.
  • For a local connection, use a USB cable.
  • For a network connection, use an Ethernet cable.
  • For fax connections, see “Initial fax setup” on page 86.
  • Make sure the software is installed before turning the printer on. For more information, see the Setup Guide .

2 Connect the power cord to the printer first and then to a wall outlet.

Page 31 of the Lexmark 356 user manual — Attaching cables
Page 31 · click to enlarge
Page 31

Additional printer setup 31

Lexmark 356 — Attaching cables diagram (page 31)
Fig. 25 · Attaching cables
Lexmark 356 — Attaching cables diagram (page 31)
Fig. 26 · Attaching cables
Page 32 of the Lexmark 356 user manual — Printing a network setup page
Page 32 · click to enlarge
Page 32

Additional printer setup 32

Verifying printer setup

Once all hardware and software options are installed and the printer is turned on, verify that the printer is set up correctly by printing the following:

  • Menu settings page —Use this page to verify that all printer options are installed correctly. A list of installed options appears toward the bottom of the page. If an option you installed is not listed, then it is not installed correctly. Remove the option and install it again.
  • Network setup page —If your printer is a network model and is attached to a network, print a network setup page to verify the network connection. This page also provides important information that aids network printing configuration.

Printing menu settings pages

Print menu settings pages to review the current menu settings and to verify printer options are installed correctly.

Note: If you have not made any menu item settings changes yet, then the menu settings pages list all the factory default settings. Once you select and save other settings from the menus, they replace the factory default settings as user default settings. A user default setting remains in effect until you access the menu again, choose another value, and save it. To restore the factory default settings, see “Restoring the factory default settings” on page 206.

1 Make sure the printer is on and Ready appears.

2 From the printer control panel, press .

3 Press the arrow buttons until Reports appears, and then press .

4 Press the arrow buttons until Menu Settings Page appears, and then press .

After the menu settings pages print, Ready appears.

Printing a network setup page

If the printer is attached to a network, print a network setup page to verify the network connection. This page also provides important information that aids network printing configuration.

1 Make sure the printer is on and Ready appears.

2 From the printer control panel, press .

3 Press the arrow buttons until Reports appears, and then press .

4 Press the arrow buttons until Network Setup Page appears, and then press .

After the network setup page prints, Ready appears.

5 Check the first section on the network setup page, and confirm that Status is “Connected.”

If Status is “Not Connected,” the LAN drop may not be active, or the network cable may be malfunctioning. Consult a system support person for a solution, and then print another network setup page.

Page 33 of the Lexmark 356 user manual — For Windows users
Page 33 · click to enlarge
Page 33

Additional printer setup 33

Setting up the printer software

Installing the printer software

  • If you installed the printer software on the computer before but need to reinstall the software, then uninstall the current software first.
  • Close all open software programs before installing the printer software.
  • 1 Obtain a copy of the software installer package.
  • From the Software and Documentation CD that came with your printer.
  • From our Web site: Go to <a href="http://support.lexmark.com" rel="nofollow noopener" target="_blank">http://support.lexmark.com</a> , and then navigate to: SUPPORT & DOWNLOAD > select your printer > select your operating system

2 Double‑click the software installer package.

Wait for the installation dialog to appear.

If you are using a Software and Documentation CD and the installation dialog does not appear, then do the following:

In Windows 8

From the Search charm, type run, and then navigate to:

Apps list > Run > type D:\setup.exe > OK.

In Windows 7 or earlier

or click Start, and then click Run. b In the Start Search or Run dialog, type D:\setup.exe.

c Press Enter, or click OK.

In Macintosh

Click the CD icon on the desktop.

3 Click Install, and then follow the instructions on the computer screen.

Updating available options in the printer driver

When any hardware options are installed, you may need to manually add the options in the printer driver to make them available for use.

For Windows users

1 Open the printers folder.

a Click

Page 34 of the Lexmark 356 user manual — Preparing to set up the printer on a wireless network
Page 34 · click to enlarge
Page 34

Additional printer setup 34

From the Search charm, type run, and then navigate to:

Apps list > Run > type control printers > OK

In Windows 7 or earlier

or click Start, and then click Run. b In the Start Search or Run dialog, type control printers.

c Press Enter, or click OK.

  • 2 Depending on your device, do either of the following:
  • Press and hold the printer you want to update.
  • Right ‑ click the printer you want to update.
  • 3 From the menu that appears, do either of the following:
  • For Windows 7 or later, select Printer properties .
  • For earlier versions, select Properties .

4 Click the Configuration tab.

  • 5 Do either of the following:
  • Click Update Now ‑ Ask Printer .
  • Under Configuration Options, manually add any installed hardware options.

6 Click Apply.

For Macintosh users

  • 1 From the Apple menu, navigate to either of the following:
  • System Preferences > Print & Scan > select your printer > Options & Supplies > Driver
  • System Preferences > Print & Fax > select your printer > Options & Supplies > Driver

2 Add any installed hardware options, and then click OK.

Setting up wireless printing

Preparing to set up the printer on a wireless network

  • Make sure your access point (wireless router) is turned on and is working properly.
  • Do not connect the installation or network cables until prompted to do so by the setup software.

Make sure you have the following information before setting up the printer on a wireless network:

  • SSID —The SSID is also referred to as the network name.
  • Wireless Mode (or Network Mode) —The mode is either infrastructure or ad hoc.

In Windows 8 · a Click

Page 35 of the Lexmark 356 user manual — Installing the printer on a wireless network (Windows)
Page 35 · click to enlarge
Page 35

Additional printer setup 35

  • Channel (for ad hoc networks) —The channel defaults to automatic for infrastructure networks.

Some ad hoc networks will also require the automatic setting. Check with your system support person if you are not sure which channel to select. • Security Method—There are four basic options for Security Method: – WEP key

If your network uses more than one WEP key, then enter up to four in the provided spaces. Select the key currently in use on the network by selecting the default WEP transmit key. – WPA or WPA2 preshared key or passphrase

WPA includes encryption as an additional layer of security. The choices are AES or TKIP. Encryption must be set for the same type on the router and on the printer, or the printer will not be able to communicate on the network. – 802.1X–RADIUS

If you are installing the printer on an 802.1X network, then you may need the following:

  • Authentication type
  • Inner authentication type
  • 802.1X user name and password
  • Certificates – No security

If your wireless network does not use any type of security, then you will not have any security information.

– If you do not know the SSID of the network that your computer is connected to, then launch the wireless utility

of the computer network adapter, and then look for the network name. If you cannot find the SSID or the security information for your network, then see the documentation that came with the access point or contact your system support person. – To find the WPA/WPA2 preshared key or passphrase for the wireless network, see the documentation that

came with the access point, see the Embedded Web Server associated with the access point, or consult your system support person.

Installing the printer on a wireless network (Windows)

Before installing the printer on a wireless network, make sure:

  • Your wireless network is set up and is working properly.
  • The computer you are using is connected to the same wireless network where you want to set up the printer.

1 Connect the power cord to the printer, then to a properly grounded electrical outlet, and then turn on the printer.

Page 36 of the Lexmark 356 user manual — In Windows 7 or earlier
Page 36 · click to enlarge
Page 36

Additional printer setup 36

Lexmark 356 — Installing the printer on a wireless network (Windows) diagram (page 36)
Fig. 27 · Installing the printer on a wireless network (Window…

1@!.

GHI 4

2 ABC

3 DEF

PQRS 7

5 JKL

8 TUV

9 WXYZ

6 MNO

  • 2 Obtain a copy of the software installer package.
  • From the Software and Documentation CD that came with your printer.
  • From our Web site: Go to <a href="http://support.lexmark.com" rel="nofollow noopener" target="_blank">http://support.lexmark.com</a> , and then navigate to: SUPPORT & DOWNLOAD > select your printer > select your operating system

3 Double‑click the software installer package.

Wait for the installation dialog to appear.

If you are using the Software and Documentation CD and the installation dialog does not appear, then do the following:

In Windows 8

From the Search charm, type run, and then navigate to:

Apps list > Run > type D:\setup.exe > OK

In Windows 7 or earlier

or click Start, and then click Run. b In the Start Search or Run dialog, type D:\setup.exe.

c Press Enter or click OK.

4 Click Install, and then follow the instructions on the computer screen.

5 Select Wireless connection when asked to choose a connection type.

6 From the Wireless Configuration dialog, select Guided Setup (Recommended).

* · # · a Click

Page 37 of the Lexmark 356 user manual — Enter the printer information
Page 37 · click to enlarge
Page 37

Additional printer setup 37

7 Temporarily connect a USB cable between the computer on the wireless network and the printer.

8 Follow the instructions on the computer screen.

Installing the printer on a wireless network (Macintosh)

Prepare to configure the printer

1 Connect the power cord to the printer, then to a properly grounded electrical outlet, and then turn on the printer.

Lexmark 356 — Prepare to configure the printer diagram (page 37)
Fig. 28 · Prepare to configure the printer

1@!.

GHI 4

5 JKL

2 ABC

3 DEF

PQRS 7

8 TUV

9 WXYZ

6 MNO

2 Locate the printer MAC address. a From the printer control panel, navigate to:

> Reports > > Network Setup Page > or

> Reports > Network Setup Page b In the Standard Network Card section, look for UAA (MAC).

Enter the printer information

1 Access the AirPort options:

In Mac OS X version 10.5 or later

From the Apple menu, navigate to either of the following:

  • System Preferences > Network > Wi ‑ Fi
  • System Preferences > Network > AirPort

* · #

Page 38 of the Lexmark 356 user manual — Configure your computer to use the printer wirelessly
Page 38 · click to enlarge
Page 38

Additional printer setup 38

In Mac OS X version 10.4

From the Finder, navigate to:

Applications > Internet Connect > AirPort

2 From the Network Name pop‑up menu, select print server [yyyyyy], where the y’s are the last six digits of the MAC address located on the MAC address sheet.

3 Open a Web browser.

4 From the Bookmarks menu, select Show or Show All Bookmarks.

5 Under COLLECTIONS, select Bonjour or Rendezvous, and then double‑click the printer name.

6 From the Embedded Web Server, navigate to the location of the wireless settings information.

Configure the printer for wireless access

1 Type the network name (SSID) in the appropriate field.

2 Select Infrastructure as your Network Mode setting if you are using an access point (wireless router).

3 Select the type of security you want to use to protect the wireless network.

4 Enter the security information necessary for the printer to connect to the wireless network.

5 Click Submit.

6 Open the AirPort application on the computer:

In Mac OS X version 10.5 or later

From the Apple menu, navigate to either of the following:

  • System Preferences > Network > Wi ‑ Fi
  • System Preferences > Network > AirPort

In Mac OS X version 10.4

From the Finder, navigate to:

Applications > Internet Connect > AirPort

7 From the Network pop‑up menu, select the name of the wireless network.

Configure your computer to use the printer wirelessly

To print on a network printer, each Macintosh user must install a custom printer driver file and create a print queue in the Printer Setup Utility or Print Center.

1 Install a printer driver file on the computer: a Obtain a copy of the software installer package.

  • From the Software and Documentation CD that came with your printer.
  • From our Web site: Go to <a href="http://support.lexmark.com" rel="nofollow noopener" target="_blank">http://support.lexmark.com</a> , and then navigate to: SUPPORT & DOWNLOAD > select your printer > select your operating system b Double ‑ click the installer package for the printer.

c Follow the instructions on the computer screen.

Page 39 of the Lexmark 356 user manual — Installing the printer on a wireless network (Macintosh)
Page 39 · click to enlarge
Page 39

Additional printer setup 39

d Select a destination, and then click Continue. e From the Easy Install screen, click Install.

f Type the user password, and then click OK. All necessary applications are installed in the computer. g Click Close when the installation is complete.

2 Add the printera For IP printing:

In Mac OS X version 10.5 or later

  • 1 From the Apple menu, navigate to either of the following:
  • System Preferences > Print & Scan
  • System Preferences > Print & Fax 2 Click + . 3 If necessary, click Add Printer or Scanner or Add Other Printer or Scanner . 4 Click the IP tab. 5 Type the IP address of the printer in the address field, and then click Add .

In Mac OS X version 10.4

1 From the Finder, navigate to: Applications > Utilities 2 Double‑click Printer Setup Utility or Print Center. 3 From the Printer List, choose Add, and then click IP Printer. 4 Type the IP address of the printer in the address field, and then click Add. b For AppleTalk printing:

  • Make sure AppleTalk is activated on your printer.
  • This feature is supported only in Mac OS X version 10.5 or earlier.

In Mac OS X version 10.5

1 From the Apple menu, navigate to: System Preferences > Print & Fax 2 Click +, and then navigate to: AppleTalk > select the printer from the list > Add

In Mac OS X version 10.4

1 From the Finder, navigate to: Applications > Utilities 2 Double‑click Printer Setup Utility or Print Center. 3 From the Printer List, click Add. 4 Click Default Browser tab > More Printers. 5 From the first pop‑up menu, select AppleTalk. 6 From the second pop‑up menu, select Local AppleTalk Zone. 7 Select the printer from the list, and then click Add.

Page 40 of the Lexmark 356 user manual — For Macintosh users
Page 40 · click to enlarge
Page 40

Additional printer setup 40

Installing the printer on an Ethernet network

For Windows users

  • 1 Obtain a copy of the software installer package.
  • From the Software and Documentation CD that came with your printer.
  • From our Web site: Go to <a href="http://support.lexmark.com" rel="nofollow noopener" target="_blank">http://support.lexmark.com</a> , and then navigate to: SUPPORT & DOWNLOAD > select your printer > select your operating system

2 Double‑click the software installer package.

Wait for the installation dialog to appear.

If you are using the Software and Documentation CD and the installation dialog does not appear, then do the following:

In Windows 8

From the Search charm, type run, and then navigate to:

Apps list > Run > type D:\setup.exe > OK

In Windows 7 or earlier

or click Start, and then click Run. b In the Start Search or Run dialog, type D:\setup.exe.

c Press Enter or click OK.

3 Click Install, and then follow the instructions on the computer screen.

4 Select Ethernet connection, and then click Continue.

5 Attach the Ethernet cable when instructed to do so.

6 Select the printer from the list, and then click Continue.

7 Follow the instructions on the computer screen.

For Macintosh users

1 Allow the network DHCP server to assign an IP address to the printer.

  • 2 Obtain the printer IP address either:
  • From the printer control panel
  • From the TCP/IP section in the Network/Ports menu

a Click

Page 41 of the Lexmark 356 user manual — In Mac OS X version 10.4 or earlier
Page 41 · click to enlarge
Page 41

Additional printer setup 41

  • By printing a network setup page or menu settings page, and then finding the TCP/IP section

3 Install the printer driver on the computer. a Double‑click the installer package for the printer. b Follow the instructions on the computer screen.

c Select a destination, and then click Continue. d From the Easy Install screen, click Install. e Type the user password, and then click OK.

All the necessary applications are installed on the computer. f Click Close when the installation is complete.

4 Add the printer. • For IP printing:

In Mac OS X version 10.5 or later

a From the Apple menu, navigate to either of the following:

– System Preferences > Print & Scan – System Preferences > Print & Fax b Click +.

c If necessary, click Add Printer or Scanner or Add Other Printer or Scanner. d Click the IP tab. e Type the printer IP address in the address field, and then click Add.

In Mac OS X version 10.4 or earlier

a From the Finder, navigate to:

Applications > Utilities b Double‑click Printer Setup Utility or Print Center.

c From the printer list, click Add, and then click IP Printer. d Type the scanner IP address in the address field, and then click Add. • For AppleTalk printing:

– Make sure AppleTalk is activated on your printer. – This feature is supported only in Mac OS X version 10.5 or earlier.

In Mac OS X version 10.5

a From the Apple menu, navigate to:

System Preferences > Print & Fax b Click +, and then navigate to:

AppleTalk > select your printer > Add

In Mac OS X version 10.4 or earlier

a From the Finder, navigate to:

Applications > Utilities b Double‑click Printer Setup Utility or Print Center.

Page 42 of the Lexmark 356 user manual — Installing the printer on an Ethernet network
Page 42 · click to enlarge
Page 42

Additional printer setup 42

c From the printer list, click Add. d Click Default Browser tab > More Printers. e From the first pop‑up menu, select AppleTalk.

f From the second pop‑up menu, select Local AppleTalk Zone. g Select the device from the list, and then click Add.

Page 43 of the Lexmark 356 user manual — Using recycled paper and other office papers
Page 43 · click to enlarge
Page 43

Minimizing your printer's environmental impact 43

Minimizing your printer's environmental impact

Lexmark is committed to environmental sustainability and is continually improving its printers to reduce their impact on the environment. We design with the environment in mind, engineer our packaging to reduce materials, and provide collection and recycling programs. For more information, see:

  • The Notices chapter
  • The Environmental Sustainability section of the Lexmark Web site at <a href="http://www.lexmark.com/environment" rel="nofollow noopener" target="_blank">www.lexmark.com/environment</a>
  • The Lexmark recycling program at <a href="http://www.lexmark.com/recycle" rel="nofollow noopener" target="_blank">www.lexmark.com/recycle</a>

By selecting certain printer settings or tasks, you may be able to reduce your printer's impact even further. This chapter outlines the settings and tasks that may yield a greater environmental benefit.

Saving paper and toner

Studies show that as much as 80% of the carbon footprint of a printer is related to paper usage. You can significantly reduce your carbon footprint by using recycled paper and the following printing suggestions, such as printing on both sides of the paper and printing multiple pages on one side of a single sheet of paper.

For information on how you can quickly save paper and energy using one printer setting, see "Using Eco-Mode".

Using recycled paper and other office papers

As an environmentally conscientious company, Lexmark supports the use of recycled paper produced specifically for use in laser (electrophotographic) printers.

While no blanket statement can be made that all recycled paper will feed well, Lexmark consistently tests papers that represent recycled cut size copier papers available on the global market. This scientific testing is conducted with rigor and discipline. Many factors are taken into consideration both separately and as a whole, including the following:

  • Amount of post-consumer waste (Lexmark tests up to 100% post-consumer waste content.)
  • Temperature and humidity conditions (Testing chambers simulate climates from all over the world.)
  • Moisture content (Business papers should have low moisture: 4–5%.)
  • Bending resistance and proper stiffness means optimum feeding through the printer.
  • Thickness (impacts how much can be loaded into a tray)
  • Surface roughness (measured in Sheffield units, impacts print clarity and how well toner fuses to the paper)
  • Surface friction (determines how easily sheets can be separated)
  • Grain and formation (impacts curling, which also influences the mechanics of how the paper behaves as it moves through the printer)
  • Brightness and texture (look and feel)

Recycled papers are better than ever; however, the amount of recycled content in a paper affects the degree of control over foreign matter. And while recycled papers are one good path to printing in an environmentally responsible manner, they are not perfect. The energy required to de-ink and deal with additives such as colorants and “glue” often generates more carbon emissions than does normal paper production. However, using recycled papers enables better resource management overall.

Lexmark concerns itself with the responsible use of paper in general based on life cycle assessments of its products. To gain a better understanding of the impact of printers on the environment, the company commissioned a number of life cycle assessments and found that paper was identified as the primary contributor (up to 80%) of carbon emissions

Page 44 of the Lexmark 356 user manual — Place multiple pages on one sheet of paper
Page 44 · click to enlarge
Page 44

Minimizing your printer's environmental impact 44

caused throughout the entire life of a device (from design to end-of-life). This is due to the energy-intensive manufacturing processes required to make paper.

Thus, Lexmark seeks to educate customers and partners on minimizing the impact of paper. Using recycled paper is one way. Eliminating excessive and unnecessary paper consumption is another. Lexmark is well-equipped to help customers minimize printing and copying waste. In addition, the company encourages purchasing paper from suppliers who demonstrate their commitment to sustainable forestry practices.

Lexmark does not endorse specific suppliers, although a converter’s product list for special applications is maintained. However, the following paper choice guidelines will help alleviate the environmental impact of printing:

1 Minimize paper consumption.

2 Be selective about the origin of wood fiber. Buy from suppliers who carry certifications such as the Forestry Stewardship Council (FSC) or The Program for the Endorsement of Forest Certification (PEFC). These certifications guarantee that the paper manufacturer uses wood pulp from forestry operators that employ environmentally and socially responsible forest management and restoration practices.

3 Choose the most appropriate paper for printing needs: normal 75 or 80 g/m2 certified paper, lower weight paper, or recycled paper.

Unacceptable paper examples

Test results indicate that the following paper types are at risk for use with laser printers:

  • Chemically treated papers used to make copies without carbon paper, also known as carbonless papers
  • Preprinted papers with chemicals that may contaminate the paper
  • Preprinted papers that can be affected by the temperature in the printer fuser
  • Preprinted papers that require a registration (the precise location on the page) greater than ± 2.3 mm (± 0.9 in.), such as optical character recognition (OCR) forms. In some cases, registration can be adjusted with a software application to successfully print on these forms.)
  • Coated papers (erasable bond), synthetic papers, thermal papers
  • Rough-edged, rough or heavily textured surface papers or curled papers
  • Recycled papers that fail EN12281:2002 (European testing)
  • Paper weighing less than 60 g/m 2 (16 lb)
  • Multiple part forms or documents

For more information about Lexmark, visit www.lexmark.com. General sustainability-related information can be found at the Environmental Sustainability link.

Conserving supplies

There are a number of ways you can reduce the amount of paper and toner you use when printing. You can:

Use both sides of the paper

If your printer model supports duplex printing, you can control whether print appears on one or two sides of the paper for a printed document by selecting 2‑sided printing from the Print dialog or the Lexmark Toolbar.

Place multiple pages on one sheet of paper

You can print up to 16 consecutive pages of a multiple‑page document onto one side of a single sheet of paper by selecting a setting from the Multipage printing (N‑Up) section of the Print dialog screen.

Page 45 of the Lexmark 356 user manual — Reducing printer noise
Page 45 · click to enlarge
Page 45

Minimizing your printer's environmental impact 45

Check your first draft for accuracy

Before printing or making multiple copies of a document:

  • Use the Lexmark preview feature, which you can select from the Print dialog or the Lexmark Toolbar to see what the document will look like before you print it.
  • Print one copy of the document to check its content and format for accuracy.

Avoid paper jams

Carefully select and load paper to avoid paper jams. For more information, see “Avoiding jams” on page 113.

Saving energy

Using Eco ‑ Mode

Use Eco‑Mode to quickly select one or more ways to reduce your printer's environmental impact.

Energy Reduce energy use, especially when the printer is idle.

  • Printer engine motors do not start until a job is ready to print. You may notice a short delay before the first page is printed.
  • The printer enters Power Saver mode after one minute of inactivity.

Paper Duplex is enabled on printer models supporting duplex.

Energy/Paper Use all the settings associated with Energy mode and Paper mode.

Off Use factory default settings for all settings associated with Eco‑Mode. This setting supports the performance specifications for your printer.

To select an Eco‑Mode setting:

1 From the printer control panel, press .

2 Press the arrow buttons until Settings appears, and then press .

3 Press the arrow buttons until General Settings appears, and then press .

4 Press the arrow buttons until Eco‑Mode appears, and then press .

5 Select the setting you want, and then press .

Submitting changes appears.

Reducing printer noise

Use Quiet Mode to reduce the printer noise.

Choose To

Page 46 of the Lexmark 356 user manual — Adjusting Power Saver
Page 46 · click to enlarge
Page 46

Minimizing your printer's environmental impact 46

On Reduce printer noise.

  • You may notice a reduction in processing speed.
  • Printer engine motors do not start until a job is ready to print. You may notice a short delay before the first page is printed.
  • Fans run at a reduced speed or are turned off.
  • If your printer has faxing capability, fax sounds are reduced or disabled, including those made by the fax speaker and ringer.

Off Use factory default settings. This setting supports the performance specifications for your printer.

To select a Quiet Mode setting:

1 From the printer control panel, press .

2 Press the arrow buttons until Settings appears, and then press .

3 Press the arrow buttons until General Settings appears, and then press .

4 Press the arrow buttons until Quiet Mode appears, and then press .

5 Select the setting you want, and then press .

Submitting changes appears.

Adjusting Power Saver

1 Make sure the printer is on and Ready appears.

2 From the printer control panel, press .

3 Press the arrow buttons until Settings appears, and then press .

4 Press the arrow buttons until General Settings appears, and then press .

5 Press the arrow buttons until Timeout appears, and then press .

6 Press the arrow buttons until Power Saver appears, and then press .

7 Press the arrow buttons to enter the number of minutes for the printer to wait before entering the Power Saver mode. Available settings range from 1–240 minutes.

8 Press .

Submitting changes appears.

9 Press , and then press until Ready appears.

Choose To

Page 47 of the Lexmark 356 user manual — Returning Lexmark cartridges for reuse or recycling
Page 47 · click to enlarge
Page 47

Minimizing your printer's environmental impact 47

Recycling

Lexmark provides collection programs and environmentally progressive approaches to recycling. For more information, see:

  • The Notices chapter
  • The Environmental Sustainability section of the Lexmark Web site at <a href="http://www.lexmark.com/environment" rel="nofollow noopener" target="_blank">www.lexmark.com/environment</a>
  • The Lexmark recycling program at <a href="http://www.lexmark.com/recycle" rel="nofollow noopener" target="_blank">www.lexmark.com/recycle</a>

Recycling Lexmark products

To return Lexmark products for recycling:

1 Go to www.lexmark.com/recycle.

2 Find the product type you want to recycle, and then select your country or region from the list.

3 Follow the instructions on the computer screen.

Recycling Lexmark packaging

Lexmark continually strives to minimize packaging. Less packaging helps to ensure that Lexmark printers are transported in the most efficient and environmentally sensitive manner and that there is less packaging to dispose of. These efficiencies result in fewer greenhouse emissions, energy savings, and natural resource savings.

Lexmark cartons are 100% recyclable where corrugated recycling facilities exist. Facilities may not exist in your area.

The foam used in Lexmark packaging is recyclable where foam recycling facilities exist. Facilities may not exist in your area.

When you return a cartridge to Lexmark, you can reuse the box that the cartridge came in. Lexmark will recycle the box.

Returning Lexmark cartridges for reuse or recycling

Lexmark Cartridge Collection Program diverts millions of Lexmark cartridges from landfills annually by making it both easy and free for Lexmark customers to return used cartridges to Lexmark for reuse or recycling. One hundred percent of the empty cartridges returned to Lexmark are either reused or demanufactured for recycling. Boxes used to return the cartridges are also recycled.

To return Lexmark cartridges for reuse or recycling, follow the instructions that came with your printer or cartridge and use the prepaid shipping label. You can also do the following:

1 Go to www.lexmark.com/recycle.

2 From the Toner Cartridges section, select your country or region.

3 Follow the instructions on the computer screen.

Page 48 of the Lexmark 356 user manual — Assigning a Custom Type name
Page 48 · click to enlarge
Page 48

Loading paper and specialty media 48

Loading paper and specialty media

This section explains how to use the 250-sheet tray, the manual feeder, an optional 550-sheet tray, and the 650-sheet duo drawer with an integrated multipurpose feeder. It also includes information about paper orientation, setting the Paper Size and Paper Type, and linking and unlinking trays.

Linking and unlinking trays

Linking trays

Tray linking is useful for large print jobs or multiple copies. When one linked tray is empty, paper feeds from the next linked tray. When the Paper Size and Paper Type settings are the same for any trays, the trays are automatically linked. The Paper Size setting for all trays must be set manually from the Paper Size menu. The Paper Type setting must be set for all trays from the Paper Type menu. The Paper Type menu and the Paper Size menu are both available from the Paper Size/Type menu.

Unlinking trays

Unlinked trays have settings that are not the same as the settings of any other tray.

To unlink a tray, change the following tray settings so that they do not match the settings of any other tray:

  • Paper Type (for example: Plain Paper, Letterhead, Custom Type <x>)

Paper Type names describe the paper characteristics. If the name that best describes your paper is used by linked trays, assign a different Paper Type name to the tray, such as Custom Type , or define your own custom name. • Paper Size (for example: letter, A4, statement)

Load a different paper size to change the Paper Size setting for a tray. Paper Size settings are not automatic; they must be set manually from the Paper Size menu.

Assigning a Custom Type name

Assign a Custom Type name to a tray to link or unlink it. Associate the same Custom Type name to each tray that you want to link. Only trays with the same custom names assigned will link.

1 Make sure the printer is on and Ready appears.

2 From the printer control panel, press .

3 Press the arrow buttons until Paper Menu appears, and then press .

4 Press the arrow buttons until Size/Type appears, and then press .

5 Press the arrow buttons, and then press to select the tray.

The Paper Size menu appears.

6 Press the arrow buttons until the Paper Type menu appears.

Page 49 of the Lexmark 356 user manual — Specify a unit of measurement
Page 49 · click to enlarge
Page 49

Loading paper and specialty media 49

7 Press .

8 Press the arrow buttons until Custom Type <x> or another custom name appears, and then press .

Submitting changes appears, followed by Paper Menu.

9 Press , and then press to return to the Ready state.

Setting the Paper Size and Paper Type

To change the Paper Size and Paper Type settings:

1 Make sure the printer is on and Ready appears.

2 From the printer control panel, press .

3 Press the arrow buttons until Paper Menu appears, and then press .

4 Press the arrow buttons until Size/Type appears, and then press .

5 Press the arrow buttons until the correct tray appears, and then press .

6 Press when Size appears.

7 Press the arrow buttons until the correct size appears, and then press .

Submitting changes appears, followed by Size.

8 Press the arrow buttons until Type appears, and then press .

9 Press the arrow buttons until the correct type appears, and then press .

Submitting changes appears, followed by Type.

10 Press , and then press to return to the Ready state.

Configuring Universal paper settings

The Universal Paper Size is a user‑defined setting that lets you print on paper sizes that are not preset in the printer menus. Set the Paper Size for the specified tray to Universal when the size you want is not available from the Paper Size menu. Then, specify all of the following Universal size settings for your paper:

  • Units of measure (inches or millimeters)
  • Portrait Height and Portrait Width
  • Feed Direction

Specify a unit of measurement

1 Make sure the printer is on and Ready appears.

2 From the printer control panel, press .

3 Press the arrow buttons until Paper Menu appears, and then press .

Page 50 of the Lexmark 356 user manual — Specify the paper height and width
Page 50 · click to enlarge
Page 50

Loading paper and specialty media 50

4 Press the arrow buttons until Universal Setup appears, and then press .

5 Press the arrow buttons until Units of Measure appears, and then press .

6 Press the arrow buttons until the correct unit of measure appears, and then press .

Submitting changes appears, followed by the Universal Setup menu.

Specify the paper height and width

Defining a specific height and width measurement for the Universal paper size (in the portrait orientation) allows the printer to support the size, including support for standard features such as duplex printing and printing multiple pages on one sheet.

1 From the Universal Setup menu, press the arrow buttons until Portrait Width or Portrait Height appears, and then press .

2 Press the arrow buttons to decrease or to increase the setting, and then press .

Submitting changes appears, followed by the Universal Setup menu.

Loading the standard 250‑sheet tray and optional 550‑sheet tray

The printer has one standard 250-sheet tray (Tray 1) with an attached manual feeder. The 250-sheet tray, the 650- sheet duo drawer, and the optional 550-sheet tray support the same paper sizes and types and are loaded in the same way.

1 Pull the tray out.

Page 51 of the Lexmark 356 user manual — Loading the standard 250-sheet tray and optional 550-sheet tray
Page 51 · click to enlarge
Page 51

Loading paper and specialty media 51

Lexmark 356 — Loading the standard 250-sheet tray and optional 550-sheet tray diagram (page 51)
Fig. 29 · Loading the standard 250-sheet tray and optional 550…

2 Squeeze the length guide tab inward as shown, and slide the guide to the correct position for the paper size being loaded.

Lexmark 356 — Loading the standard 250-sheet tray and optional 550-sheet tray diagram (page 51)
Fig. 30 · Loading the standard 250-sheet tray and optional 550…
Page 52 of the Lexmark 356 user manual — Loading the standard 250-sheet tray and optional 550-sheet tray
Page 52 · click to enlarge
Page 52

Loading paper and specialty media 52

3 If the paper is longer than letter‑size paper, then push the green tab at the back of the tray to elongate it.

Lexmark 356 — Loading the standard 250-sheet tray and optional 550-sheet tray diagram (page 52)
Fig. 31 · Loading the standard 250-sheet tray and optional 550…

4 Flex the sheets back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten the edges on a level surface.

Lexmark 356 — Loading the standard 250-sheet tray and optional 550-sheet tray diagram (page 52)
Fig. 32 · Loading the standard 250-sheet tray and optional 550…

5 Load the paper stack with the recommended print side faceup.

Lexmark 356 — Loading the standard 250-sheet tray and optional 550-sheet tray diagram (page 52)
Fig. 33 · Loading the standard 250-sheet tray and optional 550…

6 Make sure the paper guides are secure against the edges of the paper.

Page 53 of the Lexmark 356 user manual — Loading the 650 ‑ sheet duo drawer
Page 53 · click to enlarge
Page 53

Loading paper and specialty media 53

7 Insert the tray.

Lexmark 356 — Loading the 650-sheet duo drawer diagram (page 53)
Fig. 34 · Loading the 650-sheet duo drawer

8 If a different type or size of paper was loaded than the type or size previously loaded in the tray, change the Paper Type or Paper Size setting for the tray from the printer control panel.

Loading the 650 ‑ sheet duo drawer

The 650‑sheet duo drawer (Tray 2) consists of a 550‑sheet tray and an integrated 100‑sheet multipurpose feeder. The drawer is loaded in the same way as the 250‑sheet tray and the optional 550‑sheet tray, and supports the same paper types and sizes. The only differences are the look of the guide tabs and the location of the paper size indicators, as shown in the following illustration:

Lexmark 356 — Loading the 650 ‑ sheet duo drawer diagram (page 53)
Fig. 35 · Loading the 650 ‑ sheet duo drawer

1 Length guide tabs

3 Width guide tabs

2 Size indicators

Page 54 of the Lexmark 356 user manual — Using the multipurpose feeder
Page 54 · click to enlarge
Page 54

Loading paper and specialty media 54

Using the multipurpose feeder

1 Push the multipurpose feeder latch to the left.

Lexmark 356 — Using the multipurpose feeder diagram (page 54)
Fig. 36 · Using the multipurpose feeder

2 Open the multipurpose feeder.

3 Grasp the extension, and pull it straight out until it is fully extended.

4 Prepare the paper for loading. • Flex sheets of paper back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten the edges on a level surface.

Lexmark 356 — Using the multipurpose feeder diagram (page 54)
Fig. 37 · Using the multipurpose feeder
  • Hold transparencies by the edges and fan them. Straighten the edges on a level surface.
Page 55 of the Lexmark 356 user manual — Using the multipurpose feeder
Page 55 · click to enlarge
Page 55

Loading paper and specialty media 55

Lexmark 356 — Using the multipurpose feeder diagram (page 55)
Fig. 38 · Using the multipurpose feeder
  • Flex a stack of envelopes back and forth to loosen them, and then fan them. Straighten the edges on a level surface.

5 Locate the stack height limiter and tab.

Lexmark 356 — Using the multipurpose feeder diagram (page 55)
Fig. 39 · Using the multipurpose feeder

2 Stack height limiter

6 Load the paper, and then adjust the width guide to lightly touch the edge of the paper stack. • Load paper, card stock, and transparencies with the recommended print side facedown and the top edge entering first.

  • Load envelopes with the flap side up.
  • Do not load or close the multipurpose feeder while a job is printing.
  • Load only one size and type of paper at a time.

1 Tab · 3 Width guide · 4 Size indicators

Page 56 of the Lexmark 356 user manual — Using the manual feeder
Page 56 · click to enlarge
Page 56

Loading paper and specialty media 56

7 Make sure the paper is as far into the multipurpose feeder as it will go with very gentle pushing. Paper should lie flat in the multipurpose feeder. Make sure the paper fits loosely in the multipurpose feeder and is not bent or wrinkled.

8 From the printer control panel, set the Paper Size and Paper Type.

Using the manual feeder

The standard 250‑sheet tray has an integrated manual feeder that can be used to print on different types of paper one sheet at a time.

  • 1 Load a sheet of paper into the manual feeder.
  • Printable side facedown for one-sided printing.
  • Printable side faceup for two ‑ sided (duplex) printing.
Lexmark 356 — Using the manual feeder diagram (page 56)
Fig. 40 · Using the manual feeder

One‑sided printing using a letterhead Two‑sided printing using a letter‑head

  • Load envelopes with the flap side up and against the right side of the paper guide.
Lexmark 356 — Using the manual feeder diagram (page 56)
Fig. 41 · Using the manual feeder
Page 57 of the Lexmark 356 user manual — Using the manual feeder
Page 57 · click to enlarge
Page 57

Loading paper and specialty media 57

2 Feed paper into the manual feeder only to the point where its leading edge can contact the paper guides.

3 Adjust the paper guides to the paper width.

Lexmark 356 — Using the manual feeder diagram (page 57)
Fig. 42 · Using the manual feeder
Page 58 of the Lexmark 356 user manual — Grain direction
Page 58 · click to enlarge
Page 58

Paper and specialty media guide 58

Paper and specialty media guide

Additional information for printing on speciality medias may be found in the Cardstock and Label Guide available on Lexmark.com/publications.

Paper guidelines

Paper characteristics

The following paper characteristics affect print quality and reliability. Consider these characteristics when evaluating new paper stock.

Weight

The printer can automatically feed paper weights from 60 to 176 g/m2 (16 to 47 lb bond) grain long. Paper lighter than 75 g/m2 (20 lb) might not be stiff enough to feed properly, causing jams. For best performance, use 80 g/m2 (21 lb bond) grain long paper. For paper smaller than 182 x 257 mm (7.2 x 10.1 in.), we recommend 90 g/m2 or heavier paper.

Curl

Curl is the tendency for paper to curl at its edges. Excessive curl can cause paper feeding problems. Curl can occur after the paper passes through the printer, where it is exposed to high temperatures. Storing paper unwrapped in hot, humid, cold, or dry conditions, even in the trays, can contribute to paper curling prior to printing and can cause feeding problems.

Smoothness

Paper smoothness directly affects print quality. If paper is too rough, toner cannot fuse to it properly. If paper is too smooth, it can cause paper feeding or print quality issues. Always use paper between 100 and 300 Sheffield points; however, smoothness between 150 and 200 Sheffield points produces the best print quality.

Moisture content

The amount of moisture in paper affects both print quality and the ability of the printer to feed the paper correctly. Leave paper in its original wrapper until it is time to use it. This limits the exposure of paper to moisture changes that can degrade its performance.

Condition paper before printing by storing it in its original wrapper in the same environment as the printer for 24 to 48 hours before printing. Extend the time several days if the storage or transportation environment is very different from the printer environment. Thick paper may also require a longer conditioning period.

Grain direction

Grain refers to the alignment of the paper fibers in a sheet of paper. Grain is either grain long, running the length of the paper, or grain short, running the width of the paper.

For 60 to 176 g/m2 (16 to 47 lb bond) paper, use grain long fibers.

Page 59 of the Lexmark 356 user manual — Selecting preprinted forms and letterhead
Page 59 · click to enlarge
Page 59

Paper and specialty media guide 59

Fiber content

Most high‑quality xerographic paper is made from 100% chemically treated pulped wood. This content provides the paper with a high degree of stability resulting in fewer paper feeding problems and better print quality. Paper containing fibers such as cotton possesses characteristics that can negatively affect paper handling.

Unacceptable paper

The following paper types are not recommended for use with the printer:

  • Chemically treated papers used to make copies without carbon paper, also known as carbonless papers, carbonless copy paper (CCP), or no carbon required (NCR) paper
  • Preprinted papers with chemicals that may contaminate the printer
  • Preprinted papers that can be affected by the temperature in the printer fuser
  • Preprinted papers that require a registration (the precise print location on the page) greater than ±2.3 mm (±0.9 in.), such as optical character recognition (OCR) forms
  • In some cases, registration can be adjusted with a software application to successfully print on these forms.
  • Coated papers (erasable bond), synthetic papers, thermal papers
  • Rough ‑ edged, rough or heavily textured surface papers, or curled papers
  • Recycled papers that fail EN12281:2002 (European)
  • Paper weighing less than 60 g/m 2 (16 lb)
  • Multiple ‑ part forms or documents

Selecting paper

Using appropriate paper prevents jams and helps ensure trouble‑free printing.

To help avoid jams and poor print quality:

  • Always use new, undamaged paper.
  • Before loading paper, know the recommended print side of the paper. This information is usually indicated on the paper package.
  • Do not use paper that has been cut or trimmed by hand.
  • Do not mix paper sizes, types, or weights in the same source; mixing results in jams.
  • Do not use coated papers unless they are specifically designed for electrophotographic printing.

Selecting preprinted forms and letterhead

Use these guidelines when selecting preprinted forms and letterhead:

  • Use grain long for 60 to 176 g/m 2 weight paper.
  • Use only forms and letterhead printed using an offset lithographic or engraved printing process.
  • Avoid papers with rough or heavily textured surfaces.

Use papers printed with heat‑resistant inks designed for use in xerographic copiers. The ink must be able to withstand temperatures up to 200°C (392°F) without melting or releasing hazardous emissions. Use inks that are not affected by the resin in toner. Inks that are oxidation‑set or oil‑based generally meet these requirements; latex inks might not. When in doubt, contact the paper supplier.

Page 60 of the Lexmark 356 user manual — Paper sizes supported by the printer
Page 60 · click to enlarge
Page 60

Paper and specialty media guide 60

Preprinted papers such as letterhead must be able to withstand temperatures up to 200°C (392°F) without melting or releasing hazardous emissions.

Storing paper

Use these paper storage guidelines to help avoid jams and uneven print quality:

  • For best results, store paper where the temperature is 21°C (70°F) and the relative humidity is 40%. Most label manufacturers recommend printing in a temperature range of 18 to 24°C (65 to 75°F) with relative humidity between 40 and 60%.
  • Store paper in cartons when possible, on a pallet or shelf, rather than on the floor.
  • Store individual packages on a flat surface.
  • Do not store anything on top of individual paper packages.

Supported paper sizes, types, and weights

The following tables provide information on standard and optional paper sources and the types of paper they support.

Paper sizes supported by the printer

  • Your printer model may have a 650 ‑ sheet duo drawer, which consists of a 550 ‑ sheet tray and an integrated 100 ‑ sheet multipurpose feeder. The 550 ‑ sheet tray part of the 650 ‑ sheet duo drawer supports the same paper as the optional 550 ‑ sheet tray. The integrated multipurpose feeder supports different paper sizes, types, and weights.
  • The optional 550 ‑ sheet tray is not available for all printer models.
Lexmark 356 — Paper sizes supported by the printer diagram (page 60)
Fig. 43 · Paper sizes supported by the printer

Paper size Dimensions 250‑sheet tray Optional 550‑sheet tray Multipurpose feeder

A4 210 x 297 mm (8.3 x 11.7 in.)

A5 148 x 210 mm (5.83 x 8.3 in.)

JIS B5 182 x 257 mm (7.2 x 10.1 in.)

A6 105 x 148 mm (4.1 x 5.8 in.)

Statement 140 x 216 mm (5.5 x 8.5 in.)

Letter 216 x 279 mm (8.5 x 11 in.)

* When Universal is selected, the page is formatted for 216 x 356 mm (8.5 x 14 in.) unless the size is specified by the software program.

Page 61 of the Lexmark 356 user manual — Paper types supported by the printer
Page 61 · click to enlarge
Page 61

Paper and specialty media guide 61

Lexmark 356 — Paper types supported by the printer diagram (page 61)
Fig. 44 · Paper types supported by the printer

Paper size Dimensions 250‑sheet tray Optional 550‑sheet tray Multipurpose feeder

Folio 216 x 330 mm (8.5 x 13 in.)

Oficio (Mexico) 216 x 340 mm (8.5 x 13 in.)

Legal 216 x 356 mm (8.5 x 14 in.)

Executive 184 x 267 mm (7.3 x 10.5 in.)

Universal* 148 x 210 mm (5.8 x 8.3 in.) up to 216 x 356 mm (8.5 x 14 in.)

76 x 127 mm (3 x 5 in.) up to 216 x 356 mm (8.5 x 14 in.)

9 Envelope 98 x 225 mm (3.9 x 8.9 in.)

10 Envelope 105 x 241 mm (4.1 x 9.5 in.)

DL Envelope 110 x 220 mm (4.3 x 8.7 in.)

B5 Envelope 176 x 250 mm (6.9 x 9.8 in.)

C5 Envelope 162 x 229 mm (6.4 x 9 in.)

Monarch 105 x 241 mm (4.1 x 9.5 in.)

Other Envelope 98 x 162 mm (3.9 x 6.3 in.) up to 176 x 250 mm (6.9 x 9.8 in.)

* When Universal is selected, the page is formatted for 216 x 356 mm (8.5 x 14 in.) unless the size is specified by the software program.

Paper types supported by the printer

  • Your printer model may have a 650 ‑ sheet duo drawer, which consists of a 550 ‑ sheet tray and an integrated 100 ‑ sheet multipurpose feeder. The 550 ‑ sheet tray part of the 650 ‑ sheet duo drawer supports the same paper
Page 62 of the Lexmark 356 user manual — Paper types and weights supported by the printer
Page 62 · click to enlarge
Page 62

Paper and specialty media guide 62

as the optional 550‑sheet tray. The integrated multipurpose feeder supports different paper sizes, types, and weights. • The optional 550‑sheet tray is not available for all printer models.

Lexmark 356 — Paper types and weights supported by the printer diagram (page 62)
Fig. 45 · Paper types and weights supported by the printer

* Lexmark transparency part numbers 12A8240 and 12A8241 are supported from the standard tray, manual feeder, and the multipurpose feeder.

Paper types and weights supported by the printer

  • Your printer model may have a 650 ‑ sheet duo drawer, which consists of a 550 ‑ sheet tray and an integrated 100 ‑ sheet multipurpose feeder. The 550 ‑ sheet tray part of the 650 ‑ sheet duo drawer supports the same paper as the optional 550 ‑ sheet tray. The integrated multipurpose feeder supports different paper sizes, types, and weights.
  • The optional 550 ‑ sheet tray is not available for all printer models.

Paper type 250‑sheet tray Optional 550‑sheet tray

Multipurpose feeder Manual feeder

Light1, 2 60 to 74.9 g/m2 grain long (16 to 19.9 lb bond)

60 to 74.9 g/m2 grain long (16 to 19.9 lb bond)

60 to 74.9 g/m2 grain long (16 to 19.9 lb bond)

60 to 74.9 g/m2 grain long (16 to 19.9 lb bond)

Plain1, 2 75 to 89.9 g/m2 grain long (20 to 23.8 lb bond)

75 to 89.9 g/m2 grain long (20 to 23.8 lb bond)

75 to 89.9 g/m2 grain long (20 to 23.8 lb bond)

75 to 89.9 g/m2 grain long (20 to 23.8 lb bond)

1 Paper types must be set to match the supporting paper weights.

2 The duplex supports paper weights between 60–105 g/m2 (16–28 lb) grain long bond. The duplex does not support card stock, transparencies, envelopes, or labels.

3 For 60 to 176 g/m2 (16 to 47 lb bond) paper, we recommend grain long fibers.

4 Lexmark transparency part numbers 12A8240 and 12A8241 are supported from the 250‑sheet tray, manual feeder, and multipurpose feeder.

5 The pressure sensitive area must enter the printer first.

6 100 percent cotton content maximum weight is 90 g/m2 (24 lb) bond.

7 105 g/m2 (28 lb) bond envelopes are limited to 25 percent cotton content.

Page 63 of the Lexmark 356 user manual — Paper types and weights supported by the printer
Page 63 · click to enlarge
Page 63

Paper and specialty media guide 63

Paper type 250‑sheet tray Optional 550‑sheet tray

Multipurpose feeder Manual feeder

Heavy1, 2 90 to 104.9 g/m2 grain long (23.9 to 27.8 lb bond)

90 to 104.9 g/m2 grain long (23.9 to 27.8 lb bond)

90 to 104.9 g/m2 grain long (23.9 to 27.8 lb bond)

90 to 104.9 g/m2 grain long (23.9 to 27.8 lb bond)

Cardstock1, 2 105 to 176 g/m2 grain long (27.8 to 47 lb bond)

105 to 176 g/m2 grain long (27.8 to 47 lb bond)

105 to 176 g/m2 grain long (27.8 to 47 lb bond)

105 to 176 g/m2 grain long (27.8 to 47 lb bond)

Glossy papers Book—88 to 176 g/m2

Book—88 to 176 g/m2

Book—88 to 176 g/m2

Book—88 to 176 g/m2

grain long (60 to 120 lb book) Cover—162 to 176 g/m2 grain long (60 to 65 lb cover)

grain long (60 to 120 lb book) Cover—162 to 176 g/m2 grain long (60 to 65 lb cover)

grain long (60 to 120 lb book) Cover—162 to 176 g/m2 grain long (60 to 65 lb cover)

grain long (60 to 120 lb book) Cover—162 to 176 g/m2 grain long (60 to 65 lb cover)

Card stock—maximum (grain long)3

Index Bristol— 120 g/m2 (67 lb)

Index Bristol— 120 g/m2 (67 lb)

Index Bristol— 120 g/m2 (67 lb)

Index Bristol— 120 g/m2 (67 lb)

Tag—120 g/m2 (74 lb)

Tag—120 g/m2 (74 lb)

Tag—120 g/m2 (74 lb)

Tag—120 g/m2 (74 lb)

Cover—135 g/m2

Cover—135 g/m2

Cover—135 g/m2

Cover—135 g/m2

Card stock—maximum (grain short)1

Index Bristol— 163 g/m2 (90 lb)

Index Bristol— 163 g/m2 (90 lb)

Index Bristol— 163 g/m2 (90 lb)

Index Bristol— 163 g/m2 (90 lb)

Tag—163 g/m2 (100 lb)

Tag—163 g/m2 (100 lb)

Tag—163 g/m2 (100 lb)

Tag—163 g/m2 (100 lb)

Cover—176 g/m2

Cover—176 g/m2

Cover—176 g/m2

Cover—176 g/m2

Transparencies4 170–180 g/m2 (45 to 48 lb) N/A 170–180 g/m2 (45 to 48 lb) 170–180 g/m2 (45 to 48 lb)

Labels—maximum5 Paper—131 g/m2

Paper—131 g/m2 (35 lb bond)

Paper—131 g/m2

Paper—131 g/m2

Envelopes6,7 X X 60 to 105 g/m2 (16 to 28 lb bond) 60 to 105 g/m2 (16 to 28 lb bond)

1 Paper types must be set to match the supporting paper weights.

2 The duplex supports paper weights between 60–105 g/m2 (16–28 lb) grain long bond. The duplex does not support card stock, transparencies, envelopes, or labels.

3 For 60 to 176 g/m2 (16 to 47 lb bond) paper, we recommend grain long fibers.

4 Lexmark transparency part numbers 12A8240 and 12A8241 are supported from the 250‑sheet tray, manual feeder, and multipurpose feeder.

5 The pressure sensitive area must enter the printer first.

6 100 percent cotton content maximum weight is 90 g/m2 (24 lb) bond.

7 105 g/m2 (28 lb) bond envelopes are limited to 25 percent cotton content.

Show 11 more labels / short text on this page
(50 lb) · (50 lb) · (50 lb) · (50 lb) · (65 lb) · (65 lb) · (65 lb) · (65 lb) · (35 lb bond) · (35 lb bond) · (35 lb bond)
Page 64 of the Lexmark 356 user manual — Output capacity
Page 64 · click to enlarge
Page 64

Paper and specialty media guide 64

Paper capacities

Input capacities

  • Your printer model may have a 650 ‑ sheet duo drawer, which consists of a 550 ‑ sheet tray and an integrated 100 ‑ sheet multipurpose feeder. The 550 ‑ sheet tray part of the 650 ‑ sheet duo drawer supports the same paper as the optional 550 ‑ sheet tray. The integrated multipurpose feeder supports different paper sizes, types, and weights.
  • The optional 550 ‑ sheet tray is not available for all printer models.

Paper type 250‑sheet tray Optional 550‑sheet tray Multipurpose tray

Paper 250 sheets1 550 sheets1 100 sheets1

Labels 1002 2002 502

Transparencies 50 X 50

Envelopes X X 10

Other X X Various quantities3

1 Based on 75 g/m2 (20 lb) paper

2 Capacity varies depending on label material and construction.

3 Capacity varies depending on the weight and type of paper.

Output capacity

Paper type Standard output bin1

Paper 100 sheets2

1 Capacity may vary depending on media specifications and the printer operating environment.

2 Based on 75 g/m2 (20 lb) paper

Page 65 of the Lexmark 356 user manual — Tips on using letterhead
Page 65 · click to enlarge
Page 65

Printing

This chapter covers printing, printer reports, and job cancellation. Selection and handling of paper and specialty media can affect how reliably documents print. For more information, see "Avoiding jams" and "Storing print media."

Printing a document

1 Load paper into a tray or feeder.

2 From the printer control panel Paper menu, set the Paper Type and Paper Size to match the loaded paper.

3 Do one of the following:

For Windows users

a With a document open, click File > Print. b Click Properties, Preferences, Options, or Setup, and then adjust the settings as needed.

For Macintosh users

a Customize the settings as needed in the Page Setup dialog:

1 With a document open, choose File > Page Setup. 2 Choose a paper size or create a custom size to match the loaded paper. 3 Click OK. b Customize the settings as needed in the Print dialog:

1 With a document open, choose File > Print. If necessary, click the disclosure triangle to see more options. 2 From the Print dialog and pop‑up menus, adjust the settings as needed.

Printing on specialty media

Tips on using letterhead

Page orientation is important when printing on letterhead. Use the following table to determine which direction to load the letterhead:

Printing 65

Page 66 of the Lexmark 356 user manual — A B C
Page 66 · click to enlarge
Page 66

Source or process Print side and paper orientation

  • Standard 250 ‑ sheet tray
  • Optional 550 ‑ sheet tray
  • Simplex (one ‑ sided) printing from trays

Printed letterhead design is placed faceup. The top edge of the sheet with the logo is placed at the front of the tray.

A B C

Duplex (two‑sided) printing from trays

Printed letterhead design is placed facedown. The top edge of the sheet with the logo is placed at the back of the tray.

A B C

Manual feeder (simplex printing)

Preprinted letterhead design is placed facedown. The top edge of the sheet with the logo should enter the manual feeder first.

Printing 66 · Multipurpose feeder

Page 67 of the Lexmark 356 user manual — Tips on using envelopes
Page 67 · click to enlarge
Page 67
Lexmark 356 — Tips on using transparencies diagram (page 67)
Fig. 46 · Tips on using transparencies

Preprinted letterhead design is placed faceup. The top edge of the sheet with the logo should enter the manual feeder last.

Tips on using transparencies

Print samples on the transparencies being considered for use before buying large quantities.

When printing on transparencies:

  • Feed transparencies from the 250-sheet tray, manual feeder, or optional multipurpose feeder.
  • Use transparencies designed specifically for laser printers. Check with the manufacturer or vendor to ensure transparencies are able to withstand temperatures up to 200°C (392°F) without melting, discoloring, offsetting, or releasing hazardous emissions.
  • To prevent print quality problems, avoid getting fingerprints on the transparencies.
  • Before loading transparencies, fan the stack to prevent sheets from sticking together.
  • We recommend Lexmark part number 12A8240 for letter ‑ size transparencies and Lexmark part number 12A8241 for A4 ‑ size transparencies.

Tips on using envelopes

Print samples on the envelopes being considered for use before buying large quantities.

When printing on envelopes:

  • Feed envelopes from the manual feeder or optional multipurpose feeder.
  • Set the Paper Type to Envelope, and select the envelope size.
  • Use envelopes designed specifically for laser printers. Check with the manufacturer or vendor to ensure the envelopes can withstand temperatures up to 200°C (392°F) without sealing, wrinkling, curling excessively, or releasing hazardous emissions.
  • For the best performance, use envelopes made from 60 g/m 2 (16 lb bond) paper. Use up to 105 g/m 2 (28 lb bond) weight for envelopes as long as the cotton content is 25% or less. All ‑ cotton envelopes must not exceed 90 g/m 2

(24 lb bond) weight. • Use only new envelopes.

Printing 67

Page 68 of the Lexmark 356 user manual — Tips on using card stock
Page 68 · click to enlarge
Page 68
  • To optimize performance and minimize jams, do not use envelopes that: – Have excessive curl or twist – Are stuck together or damaged in any way – Have windows, holes, perforations, cutouts, or embossing – Have metal clasps, string ties, or folding bars – Have an interlocking design – Have postage stamps attached – Have any exposed adhesive when the flap is in the sealed or closed position – Have bent corners – Have rough, cockle, or laid finishes
  • Adjust the width guides to fit the width of the envelopes.

Tips on using paper labels

Print samples on the labels being considered for use before buying large quantities.

When printing on labels:

  • From MarkVision Professional, the printer software, or the printer control panel, set the Paper Type to Labels.
  • Use only letter ‑ , A4 ‑ , or legal ‑ size label sheets.
  • Use labels designed specifically for laser printers. Check with the manufacturer or vendor to verify that: – The labels can withstand temperatures up to 200°C (392°F) without sealing, excessive curling, wrinkling, or

releasing hazardous emissions. – Label adhesives, face sheet (printable stock), and topcoats can withstand up to 25 psi (172 kPa) pressure without

  • delaminating, oozing around the edges, or releasing hazardous fumes.
  • Do not use labels with slick backing material.
  • Use full label sheets. Partial sheets may cause labels to peel off during printing, resulting in a jam. Partial sheets also contaminate the printer and the cartridge with adhesive, and could void the printer and cartridge warranties.
  • Do not use labels with exposed adhesive.
  • Do not print within 1 mm (0.04 in.) of the edge of the label, of the perforations, or between die ‑ cuts of the label.
  • Be sure adhesive backing does not reach to the sheet edge. Zone coating of the adhesive at least 1 mm (0.04 in.) away from edges is recommended. Adhesive material contaminates the printer and could void the warranty.
  • If zone coating of the adhesive is not possible, remove a 1.6 mm (0.06 in.) strip on the leading and driver edge, and use a non ‑ oozing adhesive.
  • Portrait orientation works best, especially when printing bar codes.

Tips on using card stock

Card stock is heavy, single‑ply specialty media. Many of its variable characteristics, such as moisture content, thickness, and texture, can significantly impact print quality. Print samples on the card stock being considered for use before buying large quantities.

Printing 68

Page 69 of the Lexmark 356 user manual — Printing from a flash drive
Page 69 · click to enlarge
Page 69

When printing on card stock:

  • From MarkVision Professional, the printer software, or the printer control panel: 1 Set the Paper Type to Card Stock. 2 Set the Paper Weight to Card Stock Weight. 3 Set the Card Stock Weight to Normal or Heavy.
  • Be aware that preprinting, perforation, and creasing may significantly affect the print quality and cause jams or other paper handling problems.
  • Check with the manufacturer or vendor to ensure the card stock can withstand temperatures up to 200°C (392°F) without releasing hazardous emissions.
  • Do not use preprinted card stock manufactured with chemicals that may contaminate the printer. Preprinting introduces semi ‑ liquid and volatile components into the printer.
  • Use grain short card stock when possible.

Printing from a flash drive

A USB port is located on the printer control panel. Insert a flash drive to print supported file types.

  • When a USB flash drive is inserted into the printer, the printer can only scan to the flash drive or print files from the flash drive. All other printer functions are unavailable.
  • Before printing an encrypted .pdf file, enter the file password from the printer control panel.
  • You cannot print files for which you do not have printing permissions.

To print from a flash drive:

1 Make sure the printer is on and Ready or Busy appears.

2 Insert a flash drive into the USB port.

  • If you insert the flash drive when the printer requires attention, such as when a jam has occurred, the printer ignores the flash drive.

Printing 69

Page 70 of the Lexmark 356 user manual — Supported flash drives and file types
Page 70 · click to enlarge
Page 70
  • If you insert the flash drive while the printer is printing other jobs, Busy appears. After the other jobs are processed, you may need to view the held jobs list to print documents from the flash drive.

3 Press the arrow button until the document you want to print appears, and then press .

4 Press to print one copy, or enter the number of copies using the keypad, and then press to initiate the print job.

Supported flash drives and file types

Flash drive File type

Documents:

  • Lexar JumpDrive 2.0
  • Pro (256 MB, 512 MB, or 1G sizes) or
  • SanDisk Cruzer Mini (256 MB, 512 MB, or 1G sizes);
  • .pdf
  • .pcx
  • .xps
  • .dcx
  • Hi ‑ Speed USB flash drives must support the Full ‑ speed standard. Devices supporting only USB Low ‑ speed capabilities are not supported.
  • USB flash drives must support the FAT ( File Allocation Tables ) system. Devices formatted with NTFS ( New Technology File System ) or any other file system are not supported.

Images:

  • .gif
  • .JPEG
  • .bmp
  • .TIFF
  • .png

Printing 70

Page 71 of the Lexmark 356 user manual — Printing a font sample list
Page 71 · click to enlarge
Page 71

Printing photos from a PictBridge ‑ enabled digital camera

You can connect a PictBridge‑enabled digital camera to the printer, and use the buttons on the camera to select and print photos.

1 Insert one end of the USB cable into the camera.

2 Insert the other end of the USB cable into the USB port on the front of the printer.

Lexmark 356 — Printing photos from a PictBridge ‑ enabled digital camera diagram (page 71)
Fig. 47 · Printing photos from a PictBridge ‑ enabled digital…
  • Make sure the PictBridge ‑ enabled digital camera is set to the correct USB mode. See the camera documentation for more information.
  • If the PictBridge connection is successful, then a confirmation message appears on the printer display.

3 Follow the instructions on the camera to select and print photos.

Printing information pages

For more information on printing these pages, see “Printing menu settings pages” on page 32 and “Printing a network setup page” on page 32.

Printing a font sample list

To print samples of the fonts currently available for your printer:

1 Make sure the printer is on and Ready appears.

2 From the printer control panel, press .

3 Press the arrow buttons until Reports appears, and then press .

4 Press the arrow buttons until Print Fonts appears, and then press .

5 Press the arrow buttons until PCL Fonts, PostScript Fonts, or PPDS Fonts appears, and then press .

After the font sample list prints, Ready appears.

Printing 71

Page 72 of the Lexmark 356 user manual — For Windows users
Page 72 · click to enlarge
Page 72

Printing a directory list

A directory list shows the resources stored in flash memory or on the hard disk.

1 Make sure the printer is on and Ready appears.

2 From the printer control panel, press .

3 Press the arrow buttons until Reports appears, and then press .

4 Press the arrow buttons until Print Directory appears, and then press .

After the directory list prints, Ready appears.

Printing the print quality test pages

Print the print quality test pages to isolate print quality problems.

1 Turn the printer off.

2 Hold down and the right arrow button while turning the printer on.

3 Release the buttons when the dots appear, and wait for CONFIG MENU to appear.

4 Press the arrow buttons until PRINT_QUAL_TXT appears, and then press .

The print quality test pages print.

5 Press the arrow buttons until Exit Config Menu appears, and then press .

Resetting the Printer appears briefly, and then Ready appears.

Canceling a print job

Canceling a print job from the printer control panel

1 Press .

Stopping . . . appears, followed by Cancel Print Job.

2 Press .

Canceling appears.

Canceling a print job from the computer

For Windows users

1 Open the printers folder.

From the Search charm, type run, and then navigate to:

Apps list > Run > type control printers > OK

Printing 72 · In Windows 8

Page 73 of the Lexmark 356 user manual — For Macintosh users
Page 73 · click to enlarge
Page 73

In Windows 7 or earlier

or click Start, and then click Run. b In the Start Search or Run dialog, type control printers.

c Press Enter, or click OK.

2 Double‑click the printer icon.

3 Select the print job you want to cancel.

4 Click Delete.

For Macintosh users

  • 1 From the Apple menu, navigate to either of the following:
  • System Preferences > Print & Scan > select your printer > Open Print Queue
  • System Preferences > Print & Fax > select your printer > Open Print Queue

2 From the printer window, select the print job you want to cancel, and then delete it.

Printing 73 · a Click

Page 74 of the Lexmark 356 user manual — Copying using the ADF
Page 74 · click to enlarge
Page 74

Copying

Lexmark 356 — Copying diagram (page 74)
Fig. 48 · Copying

Use the scanner glass for single pages, small items (such as postcards or photos), transparencies, photo paper, or thin media (such as magazine clippings).

Making copies

Making a quick copy

1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.

2 If you are loading a document into the ADF, adjust the paper guides.

3 From the printer control panel, press for a black only copy or for a color copy.

4 If you placed the document on the scanner glass and have additional pages to copy, then place the next page on the scanner glass, and then press 1 on the numeric keypad. Otherwise, press 2 on the numeric keypad.

Copying using the ADF

1 Load an original document faceup, short edge first into the ADF.

2 Adjust the paper guides.

Copying 74

Page 75 of the Lexmark 356 user manual — Copying to transparencies
Page 75 · click to enlarge
Page 75

3 From the printer control panel, press the Copy button, or use the keypad to enter the number of copies.

4 Change the copy settings as needed.

5 From the printer control panel, press for a black only copy or for a color copy.

Copying using the scanner glass

1 Place an original document facedown on the scanner glass in the upper left corner.

2 From the printer control panel, press the Copy button, or use the keypad to enter the number of copies.

3 Change the copy settings as needed.

4 From the printer control panel, press for a black only copy or for a color copy.

5 Place the next document on the scanner glass, and then press 1 on the numeric keypad. Otherwise, press 2 on the numeric keypad.

Copying photos

1 Place a photo facedown on the scanner glass in the upper left corner.

2 From the printer control panel, press the Copy button.

3 Press the Content button until the light next to Photo comes on.

4 Change the copy settings as needed.

5 From the printer control panel, press for a black only copy or for a color copy.

6 Place the next document on the scanner glass, and then press 1 on the numeric keypad. Otherwise, press 2 on the numeric keypad.

Copying on specialty media

Copying to transparencies

1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.

2 If you are loading a document into the ADF, then adjust the paper guides.

3 From the printer control panel, press the Copy button.

4 From the Copy area, press the Options button.

5 Press the arrow buttons until Paper Source appears, and then press .

6 Press the arrow buttons until the tray or source containing the transparencies appears, and then press .

7 Change the copy settings as needed.

Copying 75

Page 76 of the Lexmark 356 user manual — Copying from one size to another
Page 76 · click to enlarge
Page 76

8 Press for a black only copy or for a color copy.

9 If you placed the document on the scanner glass and have additional pages to copy, then place the next page on the scanner glass, and then press 1 on the numeric keypad. Otherwise, press 2 on the numeric keypad.

Copying to letterhead

1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.

2 If you are loading a document into the ADF, then adjust the paper guides.

3 From the printer control panel, press the Copy button.

4 From the Copy area, press the Options button.

5 Press the arrow buttons until Paper Source appears, and then press .

6 Press the arrow buttons until the tray or source containing the letterhead appears, and then press .

7 Change the copy settings as needed.

8 Press for a black only copy or for a color copy.

9 If you placed the document on the scanner glass and have additional pages to copy, then place the next page on the scanner glass, and then press 1 on the numeric keypad. Otherwise, press 2 on the numeric keypad.

Customizing copy settings

Copying from one size to another

1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.

2 If you are loading a document into the ADF, then adjust the paper guides.

3 From the printer control panel, press the Copy button.

4 From the Copy area, press the Options button.

Original Size appears.

5 Press .

6 Press the arrow buttons until the size of the original document appears, and then press .

7 Press the arrow buttons until Paper Source appears, and then press .

8 Press the arrow buttons until the tray or source containing the size you want the copy to be appears, and then press .

Copying 76

Page 77 of the Lexmark 356 user manual — Copying on both sides of the paper (duplexing)
Page 77 · click to enlarge
Page 77

9 Change the copy settings as needed.

10 Press for a black only copy or for a color copy.

11 If you placed the document on the scanner glass and have additional pages to copy, then place the next page on the scanner glass, and then press 1 on the numeric keypad. Otherwise, press 2 on the numeric keypad.

12 Press to return to the Ready state.

Making copies using paper from a selected tray

During the copy process, you can select the tray that contains the paper type of choice. For example, if specialty media is loaded in the multipurpose feeder, and you want to make copies on that media:

1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.

2 If you are loading a document into the ADF, then adjust the paper guides.

3 From the printer control panel, press the Copy button.

4 From the Copy area, press the Options button.

5 Press the arrow buttons until Paper Source appears, and then press .

6 Press the arrow buttons until the tray or source containing the media you want the copy to be on appears, and then press .

7 Change the copy settings as needed.

8 Press for a black only copy or for a color copy.

9 If you placed the document on the scanner glass and have additional pages to copy, then place the next page on the scanner glass, and then press 1 on the numeric keypad. Otherwise, press 2 on the numeric keypad.

10 Press to return to the Ready state.

Copying on both sides of the paper (duplexing)

1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.

2 If you are loading a document into the ADF, then adjust the paper guides.

3 From the printer control panel, press the Copy button.

4 Press the Duplex/2‑Sided button.

5 Press the arrow buttons until 1 To 2 Sided appears, and then press .

The first number represents sides of the original documents; the second number represents sides of the copy. For example, select 1‑sided to 2‑sided if you have 1-sided original documents and you want 2‑sided copies.

Copying 77

Page 78 of the Lexmark 356 user manual — Making a copy lighter or darker
Page 78 · click to enlarge
Page 78

6 Press for a black only copy or for a color copy.

7 If you placed the document on the scanner glass and have additional pages to copy, then place the next page on the scanner glass, and then press 1 on the numeric keypad. Otherwise, press 2 on the numeric keypad.

Reducing or enlarging copies

Copies can be reduced to 25% of the original document size or enlarged to 400% of the original document size. The factory default setting for Scale is Auto. If you leave Scale set to Auto, then the content of your original document will be scaled to fit the size of the paper onto which you are copying.

To reduce or enlarge a copy:

1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.

2 If you are loading a document into the ADF, then adjust the paper guides.

3 From the printer control panel, press the Copy button.

4 Press the Scale button.

5 Press the arrow buttons until the scale option you want appears, and then press .

If you selected Custom then do the following:

a Press the arrow buttons to decrease or increase the size, or enter a number between 25 and 400 on the numeric

keypad. b Press .

6 Press for a black only copy or for a color copy.

7 If you placed the document on the scanner glass and have additional pages to copy, then place the next page on the scanner glass, and then press 1 on the numeric keypad. Otherwise, press 2 on the numeric keypad.

Making a copy lighter or darker

1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.

2 If you are loading a document into the ADF, then adjust the paper guides.

3 From the printer control panel, press the Copy button.

4 Press the Darkness button.

5 Press the arrow buttons to make the copy lighter or darker.

6 Press .

7 Press for a black only copy or for a color copy.

8 If you placed the document on the scanner glass and have additional pages to copy, then place the next page on the scanner glass, and then press 1 on the numeric keypad. Otherwise, press 2 on the numeric keypad.

Copying 78

Page 79 of the Lexmark 356 user manual — Collating copies
Page 79 · click to enlarge
Page 79

Adjusting copy quality

1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.

2 If you are loading a document into the ADF, then adjust the paper guides.

3 From the printer control panel, press the Copy button.

  • 4 Press the Content button until the light comes on next to the setting that best represents what you are copying:
  • Text —Used for original documents that are mostly text or line art
  • Text/Photo —Used when the original documents are a mixture of text and graphics or pictures
  • Photo —Used when the original document is a high-quality photograph or inkjet print

5 Press for a black only copy or for a color copy.

6 If you placed the document on the scanner glass and have additional pages to copy, then place the next page on the scanner glass, and then press 1 on the numeric keypad. Otherwise, press 2 on the numeric keypad.

7 Press to return to the Ready state.

Collating copies

If you print multiple copies of a document, then you can choose to print each copy as a set (collated) or to print the copies as groups of pages (not collated).

By default, Collate is set to On. If you do not want to collate your copies, then change the setting to Off.

To turn collation off:

1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.

2 If you are loading a document into the ADF, then adjust the paper guides.

3 From the printer control panel, press the Copy button.

4 From the Copy area, press the Options button.

5 Press the arrow buttons until Collate appears, and then press .

6 Press the arrow buttons until Off [1,1,1,2,2,2] appears, and then press .

7 Press for a black only copy or for a color copy.

8 If you placed the document on the scanner glass and have additional pages to copy, then place the next page on the scanner glass, and then press 1 on the numeric keypad. Otherwise, press 2 on the numeric keypad.

Copying 79 · Collated Not collated

Page 80 of the Lexmark 356 user manual — Copying multiple pages onto a single sheet
Page 80 · click to enlarge
Page 80

Placing separator sheets between copies

1 Type the printer IP address into the address field of your Web browser.

2 Click Settings.

3 Click Copy Settings.

4 Click Separator Sheets.

  • 5 Select one of the following:
  • Between pages
  • Between copies
  • Between jobs

6 Click Submit.

Copying multiple pages onto a single sheet

In order to save paper, you can copy either two or four consecutive pages of a multiple‑page document onto a single sheet of paper.

  • The Paper Size must be set to Letter, Legal, A4, or B5 JIS.
  • The Copy Size must be set to 100%.

1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.

2 If you are loading a document into the ADF, then adjust the paper guides.

3 From the printer control panel, press the Copy button.

4 From the Copy area, press the Options button.

5 Press the arrow buttons until Paper Saver appears, and then press .

6 Select the output you want.

For example, if you have four portrait-oriented original documents that you want copied to the same side of one sheet, stop at 4 on 1 Portrait, and then press .

7 Press for a black only copy or for a color copy.

8 If you placed the document on the scanner glass and have additional pages to copy, then place the next page on the scanner glass, and then press 1 on the numeric keypad. Otherwise, press 2 on the numeric keypad.

Copying 80

Page 81 of the Lexmark 356 user manual — Improving copy quality
Page 81 · click to enlarge
Page 81

Canceling a copy job

A copy job can be canceled when the document is in the ADF, on the scanner glass, or while the document is printing. To cancel a copy job:

1 From the printer control, panel press .

Stopping appears, followed by Cancel Job.

2 Press to cancel the job.

Canceling appears.

The printer clears all pages in the ADF or printer and then cancels the job. Once the job is canceled, the copy screen appears.

Improving copy quality

When should I use Text mode?

  • Use text mode when text preservation is the main goal of the copy, and preserving images copied from the original document is not a concern.
  • Text mode is recommended for receipts, carbon copy forms, and documents that contain only text or fine line art.

When should I use Text/Photo mode?

  • Use Text/Photo mode when copying an original document that contains a mixture of text and graphics.
  • Text/Photo mode is recommended for magazine articles, business graphics, and brochures.

When should I use Photograph mode?

Use Photograph mode when the original document is a high-quality photograph or inkjet print.

Copying 81 · Question Tip

Page 82 of the Lexmark 356 user manual — Setting up the e-mail function
Page 82 · click to enlarge
Page 82

E-mailing

Lexmark 356 — E-mailing diagram (page 82)
Fig. 49 · E-mailing

Use the scanner glass for single pages, small items (such as postcards or photos), transparencies, photo paper, or thin media (such as magazine clippings).

You can use the printer to e‑mail scanned documents to one or more recipients. There are three ways to send an e‑mail from the printer. You can type the e‑mail address, use a shortcut number, or use the address book.

Getting ready to e-mail

Setting up the e-mail function

For e-mail to operate, it must be turned on in the printer settings and have a valid IP address or gateway address. To set up the e-mail function:

1 Type the printer IP address into the address field of your Web browser.

2 Click Settings.

3 Click E-mail/FTP Settings.

4 Click E-mail Server Setup.

5 Change the e‑mail settings as needed.

6 Click Submit.

E-mailing 82

Page 83 of the Lexmark 356 user manual — Sending an e-mail using the keypad
Page 83 · click to enlarge
Page 83

Setting up the address book

1 Type the printer IP address into the address field of your Web browser.

2 Click Settings.

3 Click E-mail/FTP Settings.

4 Click Manage E-mail Shortcuts.

5 Change the e‑mail settings as needed.

6 Click Submit.

Creating an e-mail shortcut using the Embedded Web Server

1 Type the printer IP address into the address field of your Web browser.

2 Click Settings.

3 Click Manage Destinations.

4 Click E-mail Destination Setup.

5 Type a unique name for the recipient, and then enter the e-mail address.

6 Select the scan settings (Format, Content, Color, and Resolution).

7 Enter a shortcut number, and then click Add.

If you enter a number that is already in use, you are prompted to select another number.

E-mailing a document

Sending an e-mail using the keypad

1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.

2 If you are loading a document into the ADF, then adjust the paper guides.

3 From the printer control panel, press the Scan/Email button.

Scan to E‑mail appears.

E-mailing 83

Page 84 of the Lexmark 356 user manual — Sending an e ‑ mail using a shortcut number
Page 84 · click to enlarge
Page 84

4 Press .

Search or Manual Entry appears.

5 Press to search the address book or press the arrow buttons until Manual appears, and then press to select or enter an e‑mail address.

Using the address book

a After selecting Search on the printer control panel, press the arrow buttons until the address you want

appears, and then press . b Press 1 to search for another address or press 2 to end the search.

After you press 2, Press Start To Begin appears. c Press to send a black only copy or to send a color copy.

Manually entering an e‑mail address

After selecting Manual on the printer control panel, Entry Name appears on the first line and a blank line with a blinking cursor appears on the second line.

a Press the button on the numeric keypad that corresponds with the number or letter you want. The first time

you press the button, the number for that button appears. When you press the button again, one of the letters assigned to that button appears. b Press the right arrow button to move to the next space, or wait a few seconds and the cursor will move to the

next space. c Once the e‑mail address is entered, press . Another E‑mail? 1=Yes 2=NO appears. d Press 1 to enter another address, or press 2 to end the address entry.

After you press 2, Press Start To Begin appears. e Press to send a black only copy or to send a color copy.

Sending an e ‑ mail using a shortcut number

1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.

2 If you are loading a document into the ADF, then adjust the paper guides.

3 From the printer control panel, press the Scan/Email button.

Scan to E‑mail appears.

4 Press .

Search appears.

5 Press # , and then enter the recipient's shortcut number.

E-mailing 84

Page 85 of the Lexmark 356 user manual — Canceling an e-mail
Page 85 · click to enlarge
Page 85

6 Press 1 to enter another shortcut or press 2 to end the shortcut entry.

After you press 2, Press Start To Begin appears.

7 Press to send a black only e‑mail or to send a color e‑mail.

Sending an e-mail using the address book

1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.

2 If you are loading a document into the ADF, then adjust the paper guides.

3 From the printer control panel, press the Scan/Email button.

Scan to E‑mail appears.

4 Press .

Search appears.

5 Press to search the address book.

6 Press the arrow buttons until the address you want appears, and then press .

7 Press 1 to search for another address or press 2 to end the search.

After you press 2, Press Start To Begin appears.

8 Press to send a black only copy or to send a color copy.

Canceling an e-mail

An e‑mail can be canceled when the document is in the ADF or on the scanner glass. To cancel an e‑mail:

1 From the printer control panel, press .

Stopping appears, and then Cancel Job appears.

2 Press to cancel the job.

Canceling appears.

The printer clears all pages in the ADF and then cancels the job. Once the job is canceled, the copy screen appears.

E-mailing 85

Page 86 of the Lexmark 356 user manual — Getting the printer ready to fax
Page 86 · click to enlarge
Page 86

Faxing

Lexmark 356 — Faxing diagram (page 86)
Fig. 50 · Faxing

Use the scanner glass for single pages, small items (such as postcards or photos), transparencies, photo paper, or thin media (such as magazine clippings).

Getting the printer ready to fax

The following connection methods may not be applicable in all countries or regions.

Lexmark 356 — Getting the printer ready to fax diagram (page 86)
Fig. 51 · Getting the printer ready to fax

Faxing 86

Page 87 of the Lexmark 356 user manual — Choosing a fax connection
Page 87 · click to enlarge
Page 87

To enter your fax setup information, use the printer control panel, or use your browser to access the Embedded Web Server and then enter the Settings menu.

Using the printer control panel for fax setup

When the printer is turned on for the first time or if the printer has been off for an extended time, a series of start‑up screens appear. If the printer has fax capabilities, then the following screens appear:

Station Name Station Number

1 When Station Name appears, enter the name to be printed on all outgoing faxes. a Press the button on the numeric keypad that corresponds with the number or letter you want. The first time

you press the button, the number for that button appears. When you press the button again, one of the letters assigned to that button appears. b Press the right arrow button to move to the next space, or wait a few seconds and the cursor will move to the

next space.

2 After entering the Station Name, press .

The display changes to Station Number.

3 When Station Number appears, enter the printer fax number. a Press the button on the numeric keypad that corresponds with the number you want. b Press the right arrow button to move to the next space, or wait a few seconds and the cursor will move to the

next space.

4 After entering the Station Number, press .

Using the Embedded Web Server for fax setup

1 Type the printer IP address into the address field of your Web browser.

2 Click Settings.

3 Click Fax Settings.

4 Click Analog Fax Setup.

5 Click inside the Station Name box, and then enter the name to be printed on all outgoing faxes.

6 Click inside the Station Number box, and then enter the printer fax number.

7 Click Submit.

Choosing a fax connection

You can connect the printer with equipment such as a telephone, an answering machine, or a computer modem. To determine the best way to set up the printer, see the following table.

Faxing 87

Page 88 of the Lexmark 356 user manual — Connecting to an analog telephone line
Page 88 · click to enlarge
Page 88
  • The printer is an analog device that works best when directly connected to the wall outlet. Other devices (such as a telephone or answering machine) can be successfully attached to pass through the printer, as described in the setup steps.
  • If you want a digital connection such as ISDN, DSL, or ADSL, a third-party device (such as a DSL filter) is required. Contact your DSL provider for a DSL filter. The DSL filter removes the digital signal on the telephone line that can interfere with the ability of the printer to fax properly.
  • You do not need to attach the printer to a computer, but you do need to connect it to an analog telephone line to send and receive faxes.

Equipment and service options Fax connection setup

Connect directly to the telephone line See “Connecting to an analog telephone line” on page 88

Connect to a Digital Subscriber Line (DSL or ADSL) service See “Connecting to a DSL service” on page 89.

Connect to a Private Branch eXchange (PBX) or Integrated Services Digital Network (ISDN) system

See “Connecting to a PBX or ISDN system” on page 89.

Use a Distinctive Ring service See “Connecting to a Distinctive Ring Service” on page 90.

Connect to a telephone line, telephone, and answering machine

See “Connecting a telephone or answering machine to the same telephone line” on page 90

Connect through an adapter used in your area See “Connecting to an adapter for your country or region” on page 91.

Connect to a computer with a modem See “Connecting to a computer with a modem” on page 97.

Connecting to an analog telephone line

If your telecommunications equipment uses a US‑style (RJ11) telephone line, then follow these steps to connect the equipment:

1 Connect one end of the telephone cable that came with the printer to the top LINE port on the back of the printer.

2 Connect the other end of the telephone cable to an active analog telephone wall jack.

Lexmark 356 — Connecting to an analog telephone line diagram (page 88)
Fig. 52 · Connecting to an analog telephone line

Faxing 88

Page 89 of the Lexmark 356 user manual — Connecting to a PBX or ISDN system
Page 89 · click to enlarge
Page 89

Connecting to a DSL service

If you subscribe to a DSL service, then contact the DSL provider to obtain a DSL filter and telephone cord, and then follow these steps to connect the equipment:

1 Connect one end of the telephone cable that came with the printer to the top LINE port on the back of the printer.

2 Connect the other end of the telephone cable to the DSL filter.

3 Connect the DSL filter cable to an active telephone wall jack.

Lexmark 356 — Connecting to a DSL service diagram (page 89)
Fig. 53 · Connecting to a DSL service

Connecting to a PBX or ISDN system

If you use a PBX or ISDN converter or terminal adapter, then follow these steps to connect the equipment:

1 Connect one end of the telephone cable that came with the printer to the top LINE port on the back of the printer.

2 Connect the other end of the telephone cable to the port designated for fax and telephone use.

  • Make sure the terminal adapter is set to the correct switch type for your region.
  • Depending on the ISDN port assignment, you may have to connect to a specific port.
  • When using a PBX, make sure the call waiting tone is off.
  • When using a PBX system, dial the outside line prefix before dialing the fax number.
  • For more information on using the fax with a PBX system, see the documentation that came with your PBX system.

Faxing 89

Page 90 of the Lexmark 356 user manual — Connecting a telephone or answering machine to the same telephone line
Page 90 · click to enlarge
Page 90

Connecting to a Distinctive Ring Service

A distinctive ring service may be available from your telephone service provider. This service allows you to have multiple phone numbers on one telephone line with each phone number having a different ring pattern. This may be useful for distinguishing between fax and voice calls. If you subscribe to a distinctive ring service, follow these steps to connect the equipment:

1 Connect one end of the telephone cable that came with the printer to the top LINE port on the back of the printer.

2 Connect the other end of the telephone cable to an active analog telephone wall jack.

Lexmark 356 — Connecting to a Distinctive Ring Service diagram (page 90)
Fig. 54 · Connecting to a Distinctive Ring Service

3 Change the distinctive ring setting to match the setting you want the printer to answer. a From the printer control panel, press .

b Press the arrow buttons until Settings appears, and then press .

c Press the arrow buttons until Fax Settings appears, and then press .

d Press the arrow buttons until Distinctive Rings appears, and then press .

e Press the arrow buttons until the desired ring tone appears, and then press .

Connecting a telephone or answering machine to the same telephone line

1 Remove the plug from the bottom EXT port on the back of the printer.

Lexmark 356 — Connecting a telephone or answering machine to the same telephone line diagram (page 90)
Fig. 55 · Connecting a telephone or answering machine to the s…

Faxing 90

Page 91 of the Lexmark 356 user manual — Connecting to an adapter for your country or region
Page 91 · click to enlarge
Page 91

2 Connect your telecommunications equipment directly to the bottom EXT port on the back of the printer.

Lexmark 356 — Connecting to an adapter for your country or region diagram (page 91)
Fig. 56 · Connecting to an adapter for your country or region
Lexmark 356 — Connecting to an adapter for your country or region diagram (page 91)
Fig. 57 · Connecting to an adapter for your country or region
Lexmark 356 — Connecting to an adapter for your country or region diagram (page 91)
Fig. 58 · Connecting to an adapter for your country or region

Connecting to an adapter for your country or region

The following countries or regions may require a special adapter to connect the telephone cable to the wall outlet.

Faxing 91

Page 92 of the Lexmark 356 user manual — Countries or regions except Germany
Page 92 · click to enlarge
Page 92
  • Austria
  • Cyprus
  • Denmark
  • Finland
  • France
  • Germany
  • Ireland
  • Italy
  • New Zealand
  • Netherlands
  • Norway
  • Portugal
  • Sweden
  • Switzerland
  • United Kingdom

Countries or regions except Germany

For some countries or regions, a telephone line adapter is included in the box. Use this adapter to connect an answering machine, telephone, or other telecommunications equipment to the printer.

There is a plug installed in the bottom EXT port of the printer. This plug is necessary for the proper functioning of the adapter.

1 Connect one end of the telephone cable that came with the printer to the top LINE port on the back of the printer.

2 Connect the other end of the telephone cable to the adapter, and then connect the adapter to the wall jack.

Faxing 92 · Country/region

Page 93 of the Lexmark 356 user manual — Connecting to an adapter for your country or region
Page 93 · click to enlarge
Page 93
Lexmark 356 — Connecting to an adapter for your country or region diagram (page 93)
Fig. 59 · Connecting to an adapter for your country or region

Faxing 93

Page 94 of the Lexmark 356 user manual — Connecting to an adapter for your country or region
Page 94 · click to enlarge
Page 94

3 Connect the answering machine or telephone to the adapter

Lexmark 356 — Connecting to an adapter for your country or region diagram (page 94)
Fig. 60 · Connecting to an adapter for your country or region

Faxing 94

Page 95 of the Lexmark 356 user manual — Germany
Page 95 · click to enlarge
Page 95

Germany

There is a plug installed in the bottom EXT port of the printer. This plug is necessary for the proper functioning of the fax function and the proper operation of downstream phones.

1 Connect one end of the telephone cable that came with the printer to the top LINE port on the back of the printer.

2 Connect the other end of the telephone cable to the adapter, and then connect the adapter to the N slot of an active analog telephone wall jack.

Faxing 95

Page 96 of the Lexmark 356 user manual — Connecting to an adapter for your country or region
Page 96 · click to enlarge
Page 96
Lexmark 356 — Connecting to an adapter for your country or region diagram (page 96)
Fig. 61 · Connecting to an adapter for your country or region

3 If you would like to use the same line for both fax and telephone communication, then connect a second telephone line (not provided) between the telephone and the F slot of an active analog telephone wall jack.

Lexmark 356 — Connecting to an adapter for your country or region diagram (page 96)
Fig. 62 · Connecting to an adapter for your country or region

Faxing 96

Page 97 of the Lexmark 356 user manual — Connecting to a computer with a modem
Page 97 · click to enlarge
Page 97

4 If you would like to use the same line for recording messages on your answering machine, then connect a second telephone line (not provided) between the answering machine and the other N slot of the active analog telephone wall jack.

Lexmark 356 — Connecting to a computer with a modem diagram (page 97)
Fig. 63 · Connecting to a computer with a modem

Connecting to a computer with a modem

Connect the printer to a computer with a modem to send faxes from the software program.

  • 1 Make sure you have the following:
  • A telephone
  • A computer with a modem
  • Three telephone cords
  • A telephone wall jack

2 Connect a telephone cord into the top LINE port of the printer, and then plug it into an active telephone wall jack.

Lexmark 356 — Connecting to a computer with a modem diagram (page 97)
Fig. 64 · Connecting to a computer with a modem

Faxing 97

Page 98 of the Lexmark 356 user manual — Connecting to a computer with a modem
Page 98 · click to enlarge
Page 98

3 Remove the protective plug from the bottom EXT port of the printer.

Lexmark 356 — Connecting to a computer with a modem diagram (page 98)
Fig. 65 · Connecting to a computer with a modem

4 Connect a second telephone cord from the telephone to the computer modem.

Lexmark 356 — Connecting to a computer with a modem diagram (page 98)
Fig. 66 · Connecting to a computer with a modem

5 Connect a third telephone cord from the computer modem to the bottom EXT port of the printer.

Lexmark 356 — Connecting to a computer with a modem diagram (page 98)
Fig. 67 · Connecting to a computer with a modem

Faxing 98

Page 99 of the Lexmark 356 user manual — Turning daylight saving time on or off
Page 99 · click to enlarge
Page 99

Setting the outgoing fax name and number

To have the designated fax name and fax number printed on outgoing faxes:

1 Type the printer IP address into the address field of your Web browser.

2 Click Settings.

3 Click Fax Settings.

4 Click Analog Fax Setup.

5 Click inside the Station Name box, and then enter the name to be printed on all outgoing faxes.

6 Click inside the Station Number box, and then enter the printer fax number.

7 Click Submit.

Setting the date and time

You can set the date and time so that they are printed on every fax you send. If there is a power failure, you may have to reset the date and time. To set the date and time:

1 Type the printer IP address into the address field of your Web browser.

2 Click Settings.

3 Click Set Date and Time.

4 Click inside the Set Date & Time box, and then enter the current date and time.

5 Click Submit.

Turning daylight saving time on or off

The printer can be set to automatically adjust for daylight saving time:

1 Type the printer IP address into the address field of your Web browser.

2 Click Settings.

3 Click Set Date and Time.

4 In the Daylight Savings box, click on one of the following: Yes turns daylight saving on. No turns daylight saving off.

5 Click Submit.

Faxing 99

Page 100 of the Lexmark 356 user manual — Sending a fax using the computer
Page 100 · click to enlarge
Page 100

Sending a fax

Sending a fax using the printer control panel

1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.

2 If you are loading a document into the ADF, then adjust the paper guides.

3 From the printer control panel, press the Fax button.

To: appears on the first line, and the time and date appear on the second line.

4 Enter the fax number, and then press .

  • To place a dial pause within a fax number, press the Redial/Pause button. The dial pause appears as a comma on the Fax to: line. Use this feature if you need to dial an outside line first.
  • Press to move the cursor to the left and delete a number.
  • To use a fax shortcut, press , and then press the arrow buttons until the fax shortcut you want appears. Then, press .

5 Press 1 to enter another fax number, or press 2 to end fax number entry.

6 Press to send a black only fax or to send a color fax.

Sending a fax using the computer

The printer driver fax option lets you send a print job to the printer, which sends the job as a fax. The fax option works as a normal fax machine, but is controlled through the printer driver instead of the printer control panel.

1 With a document open, click File > Print.

2 Select the printer, and then click Properties, Preferences, Options, or Setup.

3 Navigate to:

Fax tab > Enable fax

4 Enter the recipient fax number or numbers in the “Fax number(s)” field.

5 If necessary, enter a prefix in the “Dialing prefix” field.

6 Select the appropriate paper size and page orientation.

7 If you want to include a cover page with the fax, then select Include cover page with fax, and then enter the appropriate information.

8 Click OK.

  • The Fax option is available for use only with the PostScript driver or the Universal Fax Driver. For information on installing these drivers, see the Software and Documentation CD.

Faxing 100

Page 101 of the Lexmark 356 user manual — Creating a fax destination shortcut using the printer control panel
Page 101 · click to enlarge
Page 101
  • The Fax option must be configured and enabled in the PostScript driver under the Configuration tab before it can be used.
  • If the Always display settings prior to faxing check box is selected, then you are prompted to verify the recipient information before the fax is sent. If this check box is cleared, then the queued document is sent automatically as a fax when you click OK on the Fax tab.

Creating shortcuts

Creating a fax destination shortcut using the Embedded Web Server

Instead of entering the entire phone number of a fax recipient on the printer control panel each time you want to send a fax, you can create a permanent fax destination and assign a shortcut number. You can create a shortcut to a single fax number or a group of fax numbers.

1 Type the printer IP address into the address field of your Web browser.

2 Click Settings.

3 Click Manage Destinations.

4 Click Fax Shortcut Setup.

5 Type a unique name for the shortcut, and then enter the fax number.

To create a multiple‑number shortcut, enter the fax numbers for the group.

6 Assign a shortcut number.

If you enter a number that is already in use, you are prompted to select another number.

7 Click Add.

Creating a fax destination shortcut using the printer control panel

1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.

2 If you are loading a document into the ADF, then adjust the paper guides.

3 From the printer control panel, press the Fax button.

To: appears on the first line, and the time and date appear on the second line.

4 Press .

Address Book Search appears.

5 Press the arrow buttons until Add appears, and then press .

Faxing 101

Page 102 of the Lexmark 356 user manual — Using the address book
Page 102 · click to enlarge
Page 102

6 Press the arrow buttons until Enter Fax Number appears, and then press .

7 Enter the fax number, and then press .

8 Press 1 to enter another fax number, or press 2 to end fax number entry.

9 After selecting 2=NO, Enter Name appears. a Press the button on the keypad that corresponds with the letter you want. The first time you press the button,

the number for that button appears. When you press the button again, one of the letters assigned to that button appears. b Press the right arrow button to move to the next space, or wait a few seconds and the cursor will move to the

next space. c Once the fax name is entered, press . Save as Shortcut appears. d Enter the shortcut number, and then press .

Using shortcuts and the address book

Using fax destination shortcuts

Fax destination shortcuts are just like the speed dial numbers on a telephone or fax machine. You can assign shortcut numbers when creating permanent fax destinations. Permanent fax destinations or speed dial numbers are created in the Manage Destinations link located under the Configuration tab on the Embedded Web Server. A shortcut number (1–99999) can contain a single recipient or multiple recipients. By creating a group fax destination with a shortcut number, you can quickly and easily fax broadcast information to an entire group.

1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.

2 If you are loading a document into the ADF, then adjust the paper guides.

3 Press # .

Enter Shortcut: appears.

4 Enter the shortcut number.

5 Press to send a black only fax or to send a color fax.

Using the address book

1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.

2 If you are loading a document into the ADF, then adjust the paper guides.

Faxing 102

Page 103 of the Lexmark 356 user manual — Sending a fax at a scheduled time
Page 103 · click to enlarge
Page 103

3 From the printer control panel, press the Fax button.

To: appears on the first line, and the time and date appear on the second line.

4 Press , and then press the arrow buttons until the fax number you want appears. Then, press .

Customizing fax settings

Changing the fax resolution

Adjusting the resolution setting changes the quality of the fax. Settings range from Standard (fastest speed) to Ultra Fine (slowest speed, best quality).

1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.

2 If you are loading a document into the ADF, then adjust the paper guides.

3 From the Fax area of the printer control panel, press the Resolution area.

4 Press the arrow buttons until the resolution value you want appears, and then press .

5 Press to send a black only copy or to send a color copy.

Making a fax lighter or darker

1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.

2 If you are loading a document into the ADF, then adjust the paper guides.

3 From the printer control panel, press the Darkness button.

4 Press the arrow buttons to make the fax lighter or darker.

5 Press .

6 Press to send a black only fax or to send a color fax.

Sending a fax at a scheduled time

1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.

2 If you are loading a document into the ADF, then adjust the paper guides.

3 From the printer control panel, press the Fax button.

To: appears on the first line, and the time and date appear on the second line.

4 Enter the fax number, and then press .

Faxing 103

Page 104 of the Lexmark 356 user manual — Canceling an outgoing fax
Page 104 · click to enlarge
Page 104

5 From the Fax area, press the Options button.

6 Press the arrow buttons until Delayed Send appears, and then press .

Set Send Time appears on the first line, and HH:MM with a blinking cursor appears on the second line.

7 Using the numeric keypad, enter the time you want to send the fax. After you enter the time, the cursor moves to the AM or PM field if the printer clock is set to 12 Hour format. Press the arrow buttons to change from AM to PM or PM to AM.

8 Press .

Set Send Date appears on the first line, and MM‑DD‑YYYY with a blinking cursor appears on the second line.

9 Using the numeric keypad, enter the date you want to send the fax.

10 Press .

11 Press to send a black only fax or to send a color fax.

Viewing a fax log

1 Open a Web browser.

2 In the address bar, type the IP address of the printer, and then press Enter.

3 Click Reports.

4 Click Fax Settings.

5 Click Fax Job Log or Fax Call Log.

Canceling an outgoing fax

A fax can be canceled when the document is in the ADF or on the scanner glass. To cancel a fax:

1 From the printer control panel, press .

Stopping appears, and then Cancel Job appears.

2 Press to cancel the job.

Canceling appears.

The printer clears all pages in the ADF and then cancels the job.

Faxing 104

Page 105 of the Lexmark 356 user manual — Darkness
Page 105 · click to enlarge
Page 105

Understanding fax options

Original Size

This option lets you choose the size of the documents you are going to fax.

1 From the Fax area of the printer control panel, press the Options button.

Original Size appears.

2 Press .

3 Press the arrow buttons until the size of the original document appears, and then press .

Content

This option tells the printer the original document type. Choose from Text, Text/Photo, or Photo. Content affects the quality and size of your scan.

  • Text —Emphasizes sharp, black, high-resolution text against a clean, white background
  • Text/Photo —Used when the original documents are a mixture of text and graphics or pictures
  • Photograph —Tells the scanner to pay extra attention to graphics and pictures. This setting increases the time it takes to scan, but emphasizes a reproduction of the full dynamic range of tones in the original document. This increases the amount of information saved.

Sides (Duplex)

This option informs the printer if the original document is simplex (printed on one side) or duplex (printed on both sides). This lets the scanner know what needs to be scanned for inclusion in the fax.

Resolution

This option increases how closely the scanner examines the document you want to fax. If you are faxing a photo, a drawing with fine lines, or a document with very small text, then increase the Resolution setting. This will increase the amount of time required for the scan and will increase the quality of the fax output.

  • Standard —Suitable for most documents
  • Fine —Recommended for documents with small print
  • Super fine —Recommended for original documents with fine detail

Darkness

This option adjusts how light or dark your faxes will turn out in relation to the original document.

Faxing 105

Page 106 of the Lexmark 356 user manual — Forwarding a fax
Page 106 · click to enlarge
Page 106

Improving fax quality

When should I use Text mode?

  • Use Text mode when text preservation is the main goal of the fax, and preserving images copied from the original document is not a concern.
  • Text mode is recommended for faxing receipts, carbon copy forms, and documents that contain only text or fine line art.

When should I use Text/Photo mode?

  • Use Text/Photo mode when faxing an original document that contains a mixture of text and graphics.
  • Text/Photo mode is recommended for magazine articles, business graphics, and brochures.

When should I use Photo mode?

Use Photo mode when faxing photos printed on a laser printer or taken from a magazine or newspaper.

Forwarding a fax

This option lets you print and forward received faxes to a fax number.

1 Type the printer IP address into the address field of your Web browser.

2 Click Settings.

3 Click Fax Settings.

4 Click Analog Fax Setup.

  • 5 Click inside the Fax Forwarding box, and then select one of the following:
  • Print
  • Print and Forward
  • Forward

6 From the Forward to list, select Fax.

7 Click inside the Forward to Shortcut box, and then enter the shortcut number where you want the fax forwarded.

8 Click Submit.

Faxing 106 · Question Tip

Page 107 of the Lexmark 356 user manual — Scanning to an FTP address using the keypad
Page 107 · click to enlarge
Page 107

Scanning to an FTP address 107

Scanning to an FTP address

Lexmark 356 — Scanning to an FTP address diagram (page 107)
Fig. 68 · Scanning to an FTP address

Use the scanner glass for single pages, small items (such as postcards or photos), transparencies, photo paper, or thin media (such as magazine clippings).

The scanner lets you scan documents directly to a File Transfer Protocol (FTP) server. Only one FTP address may be sent to the server at a time.

Once an FTP destination has been configured by your system support person, the name of the destination becomes available as a shortcut number, or it is listed as a profile under the Held Jobs icon. An FTP destination could also be another PostScript printer; for example, a color document can be scanned and then sent to a color printer. Sending a document to an FTP server is similar to sending a fax. The difference is that you are sending the information over your network instead of over the phone line.

Scanning to an FTP address

Scanning to an FTP address using the keypad

1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.

2 If you are loading a document into the ADF, then adjust the paper guides.

3 From the printer control panel, press the Scan/Email button.

4 Press the arrow buttons until FTP appears, and then press .

5 Type the FTP address.

6 Press to send a black‑only copy or to send a color copy.

Page 108 of the Lexmark 356 user manual — Creating an FTP shortcut using the Embedded Web Server
Page 108 · click to enlarge
Page 108

Scanning to an FTP address 108

Scanning to an FTP address using a shortcut number

1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.

2 If you are loading a document into the ADF, then adjust the paper guides.

3 From the printer control panel, press the Scan/Email button.

4 Press the arrow buttons until FTP appears, and then press .

5 Press # , and then enter the recipient's shortcut number.

6 Press 1 to enter another shortcut or press 2 to end the shortcut entry.

After you press 2, Press Start To Begin appears.

7 Press to send a black‑only copy or to send a color copy.

Creating an FTP shortcut using the Embedded Web Server

1 Type the printer IP address into the address field of your Web browser.

2 Click Settings.

3 Under Other Settings, click Manage Destinations.

4 Click FTP Shortcut Setup.

5 Select the scan settings (Format, Content, Color, and Resolution).

6 Enter a shortcut number, and then click Add.

If you enter a number that is already in use, you are prompted to select another number.

Page 109 of the Lexmark 356 user manual — Scanning to a computer
Page 109 · click to enlarge
Page 109

Scanning to a computer or USB flash memory device 109

Lexmark 356 — Scanning to a computer or USB flash memory device diagram (page 109)
Fig. 69 · Scanning to a computer or USB flash memory device

Scanning to a computer or USB flash memory device

Lexmark 356 — Scanning to a computer or USB flash memory device diagram (page 109)
Fig. 70 · Scanning to a computer or USB flash memory device

Use the scanner glass for single pages, small items (such as postcards or photos), transparencies, photo paper, or thin media (such as magazine clippings).

The scanner lets you scan documents directly to a computer or a USB flash memory device. The computer does not have to be directly connected to the printer for you to receive Scan to PC images. You can scan the document back to the computer over the network by creating a scan profile on the computer and then downloading the profile to the printer.

Scanning to a computer

1 Type the printer IP address into the address field of your Web browser.

2 Click Scan Profile.

3 Click Create Scan Profile.

4 Select your scan settings, and then click Next.

5 Select a location on your computer where you want to save the scanned output file.

6 Enter a profile name.

The profile name is also the user name, it is the name that appears in the Scan Profile list on the display.

7 Click Submit.

Page 110 of the Lexmark 356 user manual — Scanning to a USB flash memory device
Page 110 · click to enlarge
Page 110

Scanning to a computer or USB flash memory device 110

8 Scan your document.

A shortcut number was automatically assigned when you clicked Submit. Remember this shortcut number and use it when you are ready to scan your documents.

a Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.

c Press the Scan/Email button.

d Press the arrow buttons until Profiles appears, and then press .

e Press # .

Enter Shortcut: appears. f Enter the shortcut number.

g Press or to send the scanned image.

9 Return to the computer to view the file.

The output file is saved in the location you specified or launched in the program you specified.

Scanning to a USB flash memory device

1 Insert a USB flash memory device into the front USB port.

Access USB appears.

2 Press 1 on the keypad.

3 Press the arrow buttons until Scan to USB appears, and then press .

Press Start To Begin appears.

4 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.

5 If you are loading a document into the ADF, then adjust the paper guides.

6 Press or to send the scanned image.

Page 111 of the Lexmark 356 user manual — Understanding the Scan Center features
Page 111 · click to enlarge
Page 111

Scanning to a computer or USB flash memory device 111

Understanding scan to computer options

Sides (Duplex)

This option informs the printer if your original document is simplex (printed on one side) or duplex (printed on both sides). This lets the scanner know what needs to be scanned for inclusion in the document.

Darkness

This option adjusts how light or dark your scanned documents will turn out in relation to the original document.

Improving scan quality

When should I use Text mode?

  • Use Text mode when text preservation is the main goal of the scan, and preserving images copied from the original document is not a concern.
  • Text mode is recommended for receipts, carbon copy forms, and documents that only contain text or fine line art.

When should I use Text/Photo mode?

  • Use Text/Photo mode when scanning an original document that contains a mixture of text and graphics.
  • Text/Photo mode is recommended for magazine articles, business graphics, and brochures.

When should I use Photo mode?

Use Photo mode when scanning photos printed on a laser printer or taken from a magazine or newspaper.

Using the Scan Center software

Understanding the Scan Center features

The Scan Center software lets you modify scan settings and select where to send the scanned output. Scan settings modified with the Scan Center software can be saved and used for other scan jobs.

The following features are available:

  • Scan and send images to your computer
  • Convert scanned images to text
  • Preview the scanned image and adjust the brightness and contrast
  • Make larger scans without losing detail
  • Scan two ‑ sided documents

Question Tip

Page 112 of the Lexmark 356 user manual — Using the ScanBack Utility
Page 112 · click to enlarge
Page 112

Scanning to a computer or USB flash memory device 112

Using the ScanBack utility

Using the ScanBack Utility

You can use the Lexmark ScanBackTM Utility instead of the Embedded Web Server to create Scan to PC profiles. The ScanBack Utility is on the Software and Documentation CD.

1 Set up your Scan to PC profile. a Launch the ScanBack Utility. b Select the printer you want to use.

If no printers are listed, then see your system support person to obtain a list, or click the Setup button to manually search for an IP address or hostname. c Follow the instructions on the screens to define the type of document being scanned and what kind of output you want to create. d Make sure to select:

  • Show MFP Instructions —if you want to view or print the final directions
  • Create Shortcut —if you want to save this group of settings to use again e Click Finish .

A dialog box appears with your scan profile information and the status of the received images.

2 Scan your original documents. a Locate the printer you specified in the scan profile. b Load all pages in the ADF or on the scanner glass.

c From the printer control panel, press Scan/Email.

d Press the arrow buttons until Profiles appears, and then press .

e Press the arrow buttons until your scan profile name appears, and then press .

f Press or to send the scanned image.

Your output file is saved in a directory or launched in the application you specified.

Page 113 of the Lexmark 356 user manual — Envelope recommendations
Page 113 · click to enlarge
Page 113

Clearing jams

Avoiding jams

The following hints can help you avoid jams.

Paper tray recommendations

  • Make sure the paper lies flat in the tray.
  • Do not remove trays while the printer is printing.
  • Do not load trays, the multipurpose feeder, or the envelope feeder while the printer is printing. Load them prior to printing, or wait for a prompt to load them.
  • Do not load too much paper. Make sure the stack height does not exceed the indicated maximum height.
  • Make sure the guides in the paper trays, multipurpose feeder, or envelope feeder are properly positioned and are not pressing too tightly against the paper or envelopes.
  • Push all trays in firmly after loading paper.

Paper recommendations

  • Use only recommended paper or specialty media. For more information, see “Paper types and weights supported by the printer” on page 62.
  • Do not load wrinkled, creased, damp, bent, or curled paper.
  • Flex, fan, and straighten paper before loading it.
  • Do not use paper that has been cut or trimmed by hand.
  • Do not mix paper sizes, weights, or types in the same stack.
  • Make sure all sizes and types are set correctly in the printer control panel menus.
  • Store paper per the manufacturer's recommendations.

Envelope recommendations

  • To reduce wrinkling, use the Envelope Enhance menu in the Paper menu.
  • Do not feed envelopes that: – Have excessive curl or twist – Have windows, holes, perforations, cutouts, or embossing – Have metal clasps, string ties, or folding bars – Have an interlocking design – Have postage stamps attached – Have any exposed adhesive when the flap is in the sealed or closed position – Have bent corners – Have rough, cockle, or laid finishes – Are stuck together or damaged in any way

Clearing jams 113

Page 114 of the Lexmark 356 user manual — Understanding jam numbers and locations
Page 114 · click to enlarge
Page 114

Understanding jam numbers and locations

When a jam occurs, a message indicating the jam location appears. The following illustration and table list the paper jams that can occur and the location of each jam. Open doors and covers, and remove trays to access jam locations.

Lexmark 356 — Understanding jam numbers and locations diagram (page 114)
Fig. 71 · Understanding jam numbers and locations

1 200 Standard 250‑sheet tray and manual feeder (Tray 1)

1 Open the front door. Inspect the area behind the front door, and then remove any jams. 2 Open the fuser cover. Inspect the area under the cover, and then remove any jams. 3 Close the front door. 4 Pull Tray 1 out. Inspect the tray area, and then remove any jams. 5 Verify that the paper is loaded correctly. 6 Reinsert Tray 1.

2 201 Under the fuser

3 202 In the fuser

4 230 In the duplex

5 235 In the duplex

6 242 and 243 550‑sheet tray 1 Pull the 550-sheet tray out, and then remove any jams. 2 Reinsert the tray.

7 250 In the multipurpose feeder

1 Press the release latch to the left to release the multipurpose feeder. 2 Inspect the multipurpose feeder, and then remove any jams. 3 Close the multipurpose feeder.

8 290 ADF Open the ADF cover, and then remove the jam.

Clearing jams 114 · Jam number · Jam location Instructions

Page 115 of the Lexmark 356 user manual — 201 paper jam
Page 115 · click to enlarge
Page 115

200 paper jam

1 Grasp the handle, and pull the standard 250-sheet tray (Tray 1) and manual feeder out.

Lexmark 356 — 200 paper jam diagram (page 115)
Fig. 72 · 200 paper jam

2 Remove the jam.

3 Insert the tray.

4 Press .

201 paper jam

1 Grasp the front door at the side handholds, and then pull it toward you to open it.

Lexmark 356 — 201 paper jam diagram (page 115)
Fig. 73 · 201 paper jam

Clearing jams 115

Page 116 of the Lexmark 356 user manual — 202 paper jam
Page 116 · click to enlarge
Page 116

2 Remove the jammed paper.

Lexmark 356 — 202 paper jam diagram (page 116)
Fig. 74 · 202 paper jam
  • Make sure all paper fragments are removed.
  • There may be a second sheet jammed if 200.xx Paper Jam and 202.xx Paper Jam appear.

3 Close the front door.

4 Press .

202 paper jam

1 Grasp the front door at the side handholds, and then pull it toward you to open it.

Lexmark 356 — 202 paper jam diagram (page 116)
Fig. 75 · 202 paper jam

Clearing jams 116

Page 117 of the Lexmark 356 user manual — 202 paper jam
Page 117 · click to enlarge
Page 117

2 Grasp the green lever, and then pull the fuser cover toward you.

Lexmark 356 — 202 paper jam diagram (page 117)
Fig. 76 · 202 paper jam

3 Hold the fuser cover down, and then remove the jammed paper.

The fuser cover closes when released.

Lexmark 356 — 202 paper jam diagram (page 117)
Fig. 77 · 202 paper jam

4 Close the front door.

5 Press .

Clearing jams 117

Page 118 of the Lexmark 356 user manual — 242 and 243 paper jams
Page 118 · click to enlarge
Page 118

230 paper jam

1 Grasp the front door at the side handholds, and then pull it toward you to open it.

2 Remove the jam.

3 Press .

235 paper jam

This jam occurs when the paper is too short for the duplex unit.

1 Grasp the front door at the side handholds, and then pull it toward you to open it.

2 Remove the jam.

3 Load the tray with the correct paper size (A4, letter, legal, folio).

4 Insert the tray.

5 Close the front door.

6 Press .

242 and 243 paper jams

1 Grasp the handle, and pull the optional 550‑sheet tray out.

Lexmark 356 — 242 and 243 paper jams diagram (page 118)
Fig. 78 · 242 and 243 paper jams

2 Remove the jammed paper.

3 Insert the tray.

4 Press .

Clearing jams 118

Page 119 of the Lexmark 356 user manual — 290 paper jam
Page 119 · click to enlarge
Page 119

250 paper jam

1 Push the lever in the multipurpose feeder to access the paper jammed.

Lexmark 356 — 250 paper jam diagram (page 119)
Fig. 79 · 250 paper jam

2 Remove the jam.

3 Insert the tray.

4 Press .

290 paper jam

1 Remove all original documents from the ADF.

2 Open the ADF cover, and then remove any jammed paper.

Lexmark 356 — 290 paper jam diagram (page 119)
Fig. 80 · 290 paper jam

3 Close the ADF cover.

Clearing jams 119

Page 120 of the Lexmark 356 user manual — 250 paper jam
Page 120 · click to enlarge
Page 120

4 Open the scanner cover, and then remove any jammed pages.

Lexmark 356 — 250 paper jam diagram (page 120)
Fig. 81 · 250 paper jam

5 Close the scanner cover.

6 Press .

Clearing jams 120

Page 121 of the Lexmark 356 user manual — Understanding printer menus
Page 121 · click to enlarge
Page 121

Understanding printer menus 121

Understanding printer menus

Menus list

A number of menus are available to make it easy for you to change printer settings. These menus can be accessed from the printer control panel, Embedded Web Server, or the software application driver.

  • Certain menus are not available on selected printer models.
  • A setting with an * indicates it is the current default setting.

Supplies Menu Paper Menu Reports Network/Ports

Custom Scan Sizes Universal Setup

Fax Call Log Copy Shortcuts

E‑mail Shortcuts

Print Demo Asset Report

General Settings Copy Settings

Show 32 more labels / short text on this page
Cyan Cartridge · Default Source · Menu Settings Page · Active NIC · Magenta Cartridge · Size/Type · Device Statistics · Network Menu · Yellow Cartridge · Paper Texture · Network Setup Page · Wireless Menu · Black Cartridge · Paper Weight · Wireless Setup Page · USB Menu · Imaging Kit · Paper Loading · Shortcut List · Waste Toner Bottle · Custom Type · Fax Job Log · Fax Shortcuts · Profiles List · Print Fonts · Print Directory · Print Defects · Settings · Fax Settings · Flash Drive Menu · Print Settings · Set Date/Time
Page 122 of the Lexmark 356 user manual — Default Source menu
Page 122 · click to enlarge
Page 122

Understanding printer menus 122

Supplies menu

Cyan, Magenta, Yellow, or Black Toner Cartridges

Shows the status of the toner cartridges

Early Warning Low Invalid Replace Missing or Defective OK Unsupported

Shows the status of the imaging kit

OK Replace Black Imaging Kit Replace Black and Color Imaging Kit

Shows the status of the waste toner bottle

Near Full Replace Missing OK

Paper menu

Default Source menu

Sets a default paper source for all print jobs

Tray MP Feeder Manual Paper Manual Env

  • The 650 ‑ sheet ‑ duo drawer must be installed in order for MP Feeder to appear as a menu setting in the Paper Menu.
  • Tray 1 (standard tray) is the factory default setting.
  • Only installed paper sources will appear as menu settings.
  • A paper source selected by a print job will override the Default Source setting for the duration of the print job.
  • If the same size and type of paper are in more than one tray, and the Paper Size and Paper Type settings match, the trays are automatically linked. When one tray is empty, the job prints using the linked tray.
Show 5 more labels / short text on this page
Menu item Description · Imaging Kit · Waste Toner Box · Menu item Description · Default Source
Page 123 of the Lexmark 356 user manual — Size/Type menu
Page 123 · click to enlarge
Page 123

Understanding printer menus 123

Size/Type menu

Specifies the paper size loaded in each tray

Letter Legal Executive Oficio (Mexico) Folio Universal A4 A5 JIS B5

  • Letter is the US factory default setting. A4 is the international factory default setting.
  • If the same size and type of paper are in two trays and the Paper Size and Paper Type settings match, the trays are automatically linked. When one tray is empty, the job prints using paper from the linked tray.

Specifies the type of paper loaded in each tray

Plain Paper Card Stock Transparency Recycled Glossy Labels Bond Letterhead Preprinted Colored Paper Light Paper Heavy Paper Rough/Cotton Custom Type

  • Plain Paper is the factory default setting for Tray 1. Custom Type <x> is the factory default setting for all other trays.
  • If available, a user ‑ defined name will appear instead of Custom Type <x>.
  • Use this menu item to configure automatic tray linking.

Specifies the size of the paper being manually loaded

Letter Legal Executive Oficio (Mexico) Folio Statement Universal A4 A5 A5 JIS B5

Show 4 more labels / short text on this page
Menu item Description · Tray <x> Size · Tray <x> Type · Manual Paper Size
Page 124 of the Lexmark 356 user manual — Size/Type menu
Page 124 · click to enlarge
Page 124

Understanding printer menus 124

Specifies the type of paper being manually loaded

Plain Paper Card Stock Transparency Recycled Glossy Labels Bond Letterhead Preprinted Colored Paper Light Paper Heavy Paper Rough/Cotton Custom Type

Specifies the paper size loaded in the multipurpose feeder

Letter Legal Executive Oficio (Mexico) Folio Statement Universal A4 A5 A5 JIS B5

  • From the Paper menu, Configure MP must be set to Cassette in order for MP Feeder to appear as a menu setting.
  • Letter is the U.S. factory default setting. A4 is the international factory default setting.
  • The multipurpose feeder does not automatically sense paper size. The paper size value must be set.

Specifies the type of paper loaded in the multipurpose feeder.

Plain Paper Card Stock Transparency Recycled Glossy Labels Bond Letterhead Preprinted Colored Paper Light Paper Heavy Paper Rough/Cotton Custom Type

  • From the Paper menu, Configure MP must be set to Cassette in order for MP Feeder to appear as a menu setting.
  • Letter is the U.S. factory default setting. A4 is the international factory default setting.
Show 4 more labels / short text on this page
Menu item Description · Manual Paper Type · MP Feeder Size · MP Feeder Type
Page 125 of the Lexmark 356 user manual — Paper Texture menu
Page 125 · click to enlarge
Page 125

Understanding printer menus 125

Specifies the size of the envelope being manually loaded

10 Envelope DL Envelope C5 Envelope B5 Envelope Other Envelope 7 3/4 Envelope 9 Envelope

Specifies the type of envelope being manually loaded

Envelope Custom Type

Paper Texture menu

Specifies the relative texture of the paper loaded in a specific tray

Specifies the relative texture of the card stock loaded in a specific tray

  • Normal is the factory default setting.
  • Settings appear only if card stock is supported.

Specifies the relative texture of the transparencies loaded in a specific tray

Specifies the relative texture of the recycled paper loaded in a specific tray

Specifies the relative texture of the Glossy paper loaded in a specific tray

Specifies the relative texture of the labels loaded in a specific tray

Show 16 more labels / short text on this page
Menu item Description · Manual Envelope Size · Manual Envelope Type · Menu item Description · Plain Texture · Smooth Normal Rough · Card Stock Texture · Smooth Normal Rough · Transparency Texture · Smooth Normal Rough · Recycled Texture · Smooth Normal Rough · Glossy Texture · Smooth Normal Rough · Labels Texture · Smooth Normal Rough
Page 126 of the Lexmark 356 user manual — Paper Texture menu
Page 126 · click to enlarge
Page 126

Understanding printer menus 126

Specifies the relative texture of the paper loaded in a specific tray

Specifies the relative texture of the envelopes loaded in a specific tray

Specifies the relative texture of the paper loaded in a specific tray

Specifies the relative texture of the paper loaded in a specific tray

Specifies the relative texture of the colored paper loaded in a specific tray

Specifies the relative texture of the light paper loaded in a specific tray

  • Normal is the factory default setting.
  • Settings appear only if the custom type is supported.

Specifies the relative texture of the heavy paper loaded in a specific tray

  • Normal is the factory default setting.
  • Settings appear only if the custom type is supported.

Specifies the relative texture of the rough/cotton paper loaded in a specific tray

  • Rough is the factory default setting.
  • Settings appear only if the custom type is supported.

Specifies the relative texture of the custom paper loaded in a specific tray

  • Normal is the factory default setting.
  • Settings appear only if the custom type is supported.
Show 19 more labels / short text on this page
Menu item Description · Bond Texture · Smooth Normal Rough · Envelope Texture · Smooth Normal Rough · Letterhead Texture · Smooth Normal Rough · Preprinted Texture · Smooth Normal Rough · Colored Texture · Smooth Normal Rough · Light Paper · Smooth Normal Rough · Heavy Paper · Smooth Normal Rough · Rough/Cotton Paper · Rough · Custom <x> Paper · Smooth Normal Rough
Page 127 of the Lexmark 356 user manual — Paper Weight menu
Page 127 · click to enlarge
Page 127

Understanding printer menus 127

Paper Weight menu

Plain Weight, Glossy Weight, Bond Weight, Letterhead Weight, Preprinted Weight, or Colored Weight

Identifies the relative weight of the paper loaded in a specific tray

Identifies the relative weight of the transparencies loaded in a specific tray

Identifies the relative weight of the recycled paper loaded in a specific tray

Identifies the relative weight of the labels loaded in a specific tray

Identifies the relative weight of the envelopes loaded in a specific tray or feeder

Identifies the relative weight of the card stock loaded in a specific tray

  • Normal is the factory default setting.
  • Settings appear only if card stock is supported.

Identifies the relative weight of the light paper loaded in a specific tray

  • Light is the factory default setting.
  • Settings appear only if light paper is supported.

Identifies the relative weight of the heavy paper loaded in a specific tray

  • Heavy is the factory default setting.
  • Settings appear only if heavy paper is supported.
Show 16 more labels / short text on this page
Menu items Definition · Light Normal Heavy · Transparency Weight · Light Normal Heavy · Recycled Weight · Light Normal Heavy · Labels Weight · Light Normal Heavy · Envelope Weight · Light Normal Heavy · Card Stock Weight · Light Normal Heavy · Light Paper Weight · Light · Heavy Paper Weight · Heavy
Page 128 of the Lexmark 356 user manual — Paper Loading menu
Page 128 · click to enlarge
Page 128

Understanding printer menus 128

Identifies the relative weight of the rough/cotton paper loaded in a specific tray

  • Normal is the factory default setting.
  • Settings appear only if rough/cotton paper is supported.

Identifies the relative weight of the custom paper type loaded in a specific tray

  • Normal is the factory default setting.
  • Settings appear only if custom paper is supported.

Paper Loading menu

Determines whether 2‑sided printing occurs for all jobs that specify Recycled as the paper type

Determines whether 2‑sided printing occurs for all jobs that specify Glossy as the paper type

Determines whether 2‑sided printing occurs for all jobs that specify Bond as the paper type

Determines whether 2‑sided printing occurs for all jobs that specify Letterhead as the paper type

Determines whether 2‑sided printing occurs for all jobs that specify Preprinted as the paper type

Determines whether 2‑sided printing occurs for all jobs that specify Colored as the paper type

Determines whether 2‑sided printing occurs for all jobs that specify Light Paper as the paper type

Show 20 more labels / short text on this page
Menu items Definition · Rough/Cotton Paper Weight · Normal · Custom <x> · Light Normal Heavy · Menu item Description · Recycled Loading · Duplex Off · Glossy Loading · Duplex Off · Bond Loading · Duplex Off · Letterhead Loading · Duplex Off · Preprinted Loading · Duplex Off · Colored Loading · Duplex Off · Light Paper Loading · Duplex Off
Page 129 of the Lexmark 356 user manual — Custom Types menu
Page 129 · click to enlarge
Page 129

Understanding printer menus 129

Determines whether 2‑sided printing occurs for all jobs that specify Heavy Paper as the paper type

Determines whether 2‑sided printing occurs for all jobs that specify Rough/Cotton as the paper type

Determines whether 2‑sided printing occurs for all jobs that specify Custom as the paper type

  • Off is the factory default setting.
  • Custom <x> Loading is available only if the custom type is supported.

Custom Types menu

Associates a paper or specialty media type with a factory default Custom Type <x> name or a user‑defined Custom Name created from the Embedded Web Server or MarkVisionTM Professional. This user‑defined name displays instead of Custom Type <x>.

Paper Card Stock Transparency Glossy Labels Envelope Rough/Cotton

  • Paper is the factory default setting.
  • The custom media type must be supported by the selected tray or feeder in order for you to print from that source.

Specifies a paper type when the Recycled setting is selected in other menus

Paper Card Stock Transparency Glossy Labels Envelope Cotton

  • Paper is the factory default setting.
  • The Recycled type must be supported by the selected tray or feeder in order for you to print from that source.
Show 10 more labels / short text on this page
Menu item Description · Heavy Paper Loading · Duplex Off · Rough/Cotton Loading · Duplex Off · Custom <x> Loading · Duplex Off · Menu item Description · Custom Type <x> · Recycled
Page 130 of the Lexmark 356 user manual — Universal Setup menu
Page 130 · click to enlarge
Page 130

Understanding printer menus 130

Custom Scan Sizes menu

Specifies a non‑standard scan size.

1–14 inches (25–355.6 mm) Height

  • 4.83 inches is the US factory default setting for Width. 123 millimeters is the international factory default setting for Width.
  • 6.32 inches is the US factory default setting for Height. 161 millimeters is the international factory default setting for Height.
  • Landscape is the factory default setting for Orientation.
  • On is the factory default setting for 2 scans per side.

1–14 inches (25–355.6 mm) Orientation

Landscape Portrait 2 scans per side Off On

Custom Scan Size <x>

Specifies a custom scan size name and options. This name replaces a Custom Scan Size <x> name in the printer menus.

Scan Size Name Width

1–14 inches (25–355.6 mm) Height

  • 8.5 inches is the US factory default setting for Width. 216 millimeters is the international factory default setting for Width.
  • 14 inches is the US factory default setting for Height. 356 millimeters is the international factory default setting for Height.
  • Landscape is the factory default setting for Orientation.
  • Off is the factory default setting for 2 scans per side.

1–14 inches (25–355.6 mm) Orientation

Landscape Portrait 2 scans per side Off On

Universal Setup menu

These menu items are used to specify the height and width of the Universal Paper Size. The Universal Paper Size is a user‑defined paper size setting. It is listed with the other paper size settings and includes similar options, such as support for duplex printing and printing multiple pages on one sheet.

Identifies the units of measure

  • Inches is the US factory default setting.
  • Millimeters is the international factory default setting.
Show 6 more labels / short text on this page
Menu item Description · ID Card · Width · Menu item Description · Units of Measure · Inches Millimeters
Page 131 of the Lexmark 356 user manual — Reports menu
Page 131 · click to enlarge
Page 131

Understanding printer menus 131

Sets the portrait width

3–14.7 inches 76–360 mm

  • If the width exceeds the maximum, the printer uses the maximum width allowed.
  • 8.5 inches is the US factory default setting. Inches can be increased in 0.01 ‑ inch increments.
  • 216 mm is the international factory default setting. Millimeters can be increased in 1 ‑ mm increments.

Sets the portrait height

3–14.7 inches 76–360 mm

  • If the height exceeds the maximum, the printer uses the maximum height allowed.
  • 14 inches is the US factory default setting. Inches can be increased in 0.01 ‑ inch increments.
  • 356 mm is the international factory default setting. Millimeters can be increased in 1 ‑ mm increments.

Reports menu

Reports menu

Menu Settings Page Prints a report containing information about paper loaded into trays, installed memory, the total page count, alarms, timeouts, the printer control panel language, the TCP/IP address, the status of supplies, the status of the network connection, and other information

Device Statistics Prints a report containing printer statistics such as supply information and details about printed pages

Network Setup Page Prints a report containing information about the network printer settings, such as the TCP/IP address information

Shortcut List Prints a report containing information about configured shortcuts

Fax Job Log Prints a report containing information about the last 200 completed faxes

Fax Call Log Prints a report containing information about the last 100 attempted, received, and blocked calls

Copy Shortcuts Prints a report containing information about copy shortcuts

E‑mail Shortcuts Prints a report containing information about e‑mail shortcuts

Show 4 more labels / short text on this page
Menu item Description · Portrait Width · Portrait Height · Menu item Description
Page 132 of the Lexmark 356 user manual — Network menu
Page 132 · click to enlarge
Page 132

Understanding printer menus 132

Fax Shortcuts Prints a report containing information about fax shortcuts

Profiles List Prints a list of profiles stored in the printer

Print Fonts Prints a report of all the fonts available for the printer language currently set in the printer

Print Defects Prints a repeating defects page used as a diagnostic tool for identifying print problems

Print Demo Prints a resident demonstration page

Asset Report Prints a report containing asset information including the printer serial number and model name. The report contains text and UPC barcodes that can be scanned into an asset database.

Network/Ports

Active NIC menu

Shows the print server

Auto List of networks

Network menu

Sets the printer to automatically switch to PCL emulation when a print job requires it, regardless of the default printer language

  • On is the factory default setting.
  • When the Off setting is used, the printer does not examine incoming data.
  • When the Off setting is used, the printer uses PostScript emulation if PS SmartSwitch is set to On. It uses the default printer language specified in the Setup menu if PS SmartSwitch is set to Off.
Show 6 more labels / short text on this page
Menu item Description · Menu item Description · Active NIC · Menu item Description · PCL SmartSwitch · On Off
Page 133 of the Lexmark 356 user manual — Network/Ports
Page 133 · click to enlarge
Page 133

Understanding printer menus 133

Sets the printer to automatically switch to PS emulation when a print job requires it, regardless of the default printer language

  • On is the factory default setting.
  • When the Off setting is used, the printer does not examine incoming data.
  • When the Off setting is used, the printer uses PCL emulation if PCL SmartSwitch is set to On. It uses the default printer language specified in the Setup menu if PCL SmartSwitch is set to Off.

Sets the printer to perform the special processing required for bidirectional communication following the conventions defined by the NPA protocol

  • Auto is the factory default setting
  • Changing this setting from the printer control panel and then exiting the menus causes the printer to restart. The menu selection is updated.

Sets the size of the network input buffer

  • Auto is the factory default setting.
  • The value can be changed in 1 ‑ K increments.
  • The maximum size allowed depends on the amount of memory in the printer, the size of the other link buffers, and whether Resource Save is set to On or Off.
  • To increase the maximum size range for the Network Buffer, disable or reduce the size of the USB buffer.
  • Changing this setting from the printer control panel and then exiting the menus causes the printer to restart. The menu selection is updated.

Sets the printer to process Macintosh binary PostScript print jobs

  • Auto is the factory default setting.
  • The Off setting filters print jobs using the standard protocol.
  • The On setting processes raw binary PostScript print jobs.

Lists all the network setup menus, regardless of the active network of the printer

Reports Menu Network Card menu TCIP Menu IPv6 Menu Wireless menu AppleTalk menu

Show 10 more labels / short text on this page
Menu item Description · PS SmartSwitch · On Off · NPA Mode · Off Auto · Network Buffer · Disabled Auto · Mac Binary PS · On Off Auto · Network Setup
Page 134 of the Lexmark 356 user manual — USB menu
Page 134 · click to enlarge
Page 134

Understanding printer menus 134

Wireless menu

Use the following menu items to view or configure the wireless internal print server settings.

Lets you select a mode

  • Infrastructure mode makes the printer wireless network accessible through an access point.
  • Ad hoc mode configures the printer for peer ‑ to ‑ peer wireless networking.

Lets you select a setting that is compatible with your equipment

802.11n

802.11b/g

802.11b/g/n

Lets you select an available network for the printer to use

View Signal Quality Lets you view the strength of the wireless connection

View Security Mode Lets you view the security of the wireless connection

USB menu

Sets the printer to automatically switch to PCL emulation when a print job requires it, regardless of the default printer language

  • On is the factory default setting.
  • When the Off setting is used, the printer does not examine incoming data.
  • When the Off setting is used, the printer uses PostScript emulation if PS SmartSwitch is set to On. It uses the default printer language specified in the Setup menu if PS SmartSwitch is set to Off.

Sets the printer to automatically switch to PS emulation when a print job requires it, regardless of the default printer language

  • On is the factory default setting.
  • When the Off setting is used, the printer does not examine incoming data.
  • When the Off setting is used, the printer uses PCL emulation if PCL SmartSwitch is set to On. It uses the default printer language specified in the Setup menu if PCL SmartSwitch is set to Off.
Show 10 more labels / short text on this page
Menu item Description · Mode · Infrastructure Ad hoc · Compatibility · Choose Network · Menu item Description · PCL SmartSwitch · On Off · PS SmartSwitch · On Off
Page 135 of the Lexmark 356 user manual — Wireless menu
Page 135 · click to enlarge
Page 135

Understanding printer menus 135

Sets the printer to perform the special processing required for bidirectional communication following the conventions defined by the NPA protocol

  • Auto is the factory default setting.
  • Changing this setting from the printer control panel and then exiting the menus causes the printer to restart. The menu selection is updated.

Sets the size of the USB input buffer

  • Auto is the factory default setting.
  • Changing this setting from the printer control panel and then exiting the menus causes the printer to restart. The menu selection is updated.

Sets the printer to process Macintosh binary PostScript print jobs

  • Auto is the factory default setting.
  • The Off setting filters print jobs using the standard protocol.
  • The On setting processes raw binary PostScript print jobs.

ENA Address Sets the network address information for an external print server that is attached to the printer using a USB cable

ENA Netmask Sets the netmask information for an external print server that is attached to the printer using a USB cable

ENA Gateway Sets the gateway information for an external print server that is attached to the printer using a USB cable

Show 7 more labels / short text on this page
Menu item Description · NPA Mode · Off Auto · USB Buffer · Disabled Auto · Mac Binary PS · On Off Auto
Page 136 of the Lexmark 356 user manual — General Settings menu
Page 136 · click to enlarge
Page 136

Understanding printer menus 136

Settings menu

General Settings menu

Sets the language of the text appearing on the display

English Francais Deutsch Italiano Espanol Dansk Norsk Nederlands Svenska Portuguese Suomi Russian Polski Magyar Turkce Cesky Simplified Chinese Traditional Chinese Korean Japanese

Minimizes the use of energy, paper, or specialty media

Off Energy Energy/Paper Paper

  • Off is the factory default setting. Off resets the printer to its factory default settings.
  • The Energy setting minimizes the power used by the printer. Performance may be affected but quality is not.
  • Paper minimizes the amount of paper and specialty media needed for a print job. Performance may be affected but quality is not.
  • Energy/Paper minimizes the use of power and of paper and specialty media.

Reduces the amount of noise produced by the printer

  • Off is the factory default setting.
  • On configures the printer to produce as little noise as possible.
Show 5 more labels / short text on this page
Menu item Description · Display Language · Eco‑Mode · Quiet Mode · Off On
Page 137 of the Lexmark 356 user manual — Settings menu
Page 137 · click to enlarge
Page 137

Understanding printer menus 137

Instructs the printer to run the setup wizard

  • Yes is the factory default setting.
  • After completing the setup wizard by selecting Done at the Country select screen, the default setting becomes No.

Specifies the printer factory default measurements. The default setting is determined by the country selection in the initial setup wizard.

U.S. Metric

Scan to PC Port Range

Specifies a valid port range for printers behind a port blocking firewall. The valid ports are specified by two sets of numbers separated by a semicolon.

Sets the function the printer enters when Go, Content, Darkness, or any number is pressed on the printer control panel

Formats the printer date

MM‑DD‑YYYY DD‑MM‑YYYY YYYY‑MM‑DD

Formats the printer time

12 hour A.M./P.M. 24 hour clock

Sets an alarm to sound when the printer requires operator intervention. Available selections for each alarm type are:

Alarm Control Cartridge Alarm

  • Single is the factory default setting for Alarm Control. Single sounds three quick beeps.
  • Off means no alarm will sound.
  • Continuous repeats three beeps every 10 seconds.

Specifies the number of minutes of inactivity before some systems begin entering a minimum power state.

Sets the amount of time in seconds the printer waits before returning the printer display to a Ready state

Show 16 more labels / short text on this page
Menu item Description · Run Initial setup · Yes No · Paper Sizes · <port range> · Default Mode · Copy Fax · Date Format · Time Format · Alarms · Off Single Continuous · Timeouts · Power Saver · Disabled 1–240 · Timeouts · Screen Timeout
Page 138 of the Lexmark 356 user manual — Settings menu
Page 138 · click to enlarge
Page 138

Understanding printer menus 138

Sets the amount of time in seconds the printer waits to receive an end‑of‑job message before canceling the remainder of the print job

  • 90 seconds is the factory default setting.
  • When the timer expires, any partially printed page still in the printer is printed, and then the printer checks to see if any new print jobs are waiting.
  • Print Timeout is available only when using PCL or PPDS emulation. This setting has no effect on PostScript emulation print jobs.

Sets the amount of time in seconds the printer waits for additional data before canceling a print job

  • 40 seconds is the factory default setting.
  • Wait Timeout is available only when the printer is using PostScript emulation. This setting has no effect on PCL or PPDS emulation print jobs.

Lets the printer automatically continue printing from certain offline situations when not resolved within the specified time period

  • Disabled is the factory default setting.
  • 5–255 is a range of time in seconds.

Specifies whether the printer reprints jammed pages

  • Auto is the factory default setting. The printer reprints jammed pages unless the memory required to hold the pages is needed for other printer tasks.
  • On sets the printer to always reprint jammed pages.
  • Off sets the printer to never reprint jammed pages.

Lets the printer successfully print a page that may not have printed otherwise

  • Off is the factory default setting. Off prints a partial page when there is not enough memory to print the whole page.
  • On sets the printer to process the whole page so that the entire page prints.
Show 16 more labels / short text on this page
Menu item Description · Timeouts · Print Timeout · Disabled 1–255 · Timeouts · Wait Timeout · Disabled 15–65535 · Print Recovery · Auto Continue · Disabled 5–255 · Print Recovery · Jam Recovery · On Off Auto · Print Recovery · Page Protect · On Off
Page 139 of the Lexmark 356 user manual — Copy Settings menu
Page 139 · click to enlarge
Page 139

Understanding printer menus 139

Returns the printer settings to the factory default settings

Do Not Restore Restore Now

  • Do Not Restore is the factory default setting. Do Not Restore keeps the user ‑ defined settings.
  • Restore returns all printer settings to the factory default settings except Network/Ports menu settings. All downloads stored in RAM are deleted.

Copy Settings menu

Specifies the type of content contained in the copy job

  • Text emphasizes sharp, black, high-resolution text against a clean, white background.
  • Text/Photo is the factory default setting. Text/Photo is used when the original documents are a mixture of text and graphics or pictures.
  • Photograph tells the scanner to pay extra attention to graphics and pictures. This setting increases the time it takes to scan, but emphasizes a reproduction of the full dynamic range of tones in the original document. This increases the amount of information saved.

Specifies whether an original document is duplex (two‑sided) or simplex (one-sided), and then specifies whether the copy should be duplex or simplex

1 sided to 1 sided 1 sided to 2 sided 2 sided to 1 sided 2 sided to 2 sided

  • Duplex is not available on selected models.
  • 1 sided to 1 sided —The original page has printing on one side. The copied page will have printing on one side.
  • 1 sided to 2 sided —The original page has printing on one side. The copied page will have printing on both sides. For example, if the original is six sheets, the copy is three sheets with printing on both sides.
  • 2 sided to 1 sided —The original page has printing on both sides. The copied page will have printing on only one side. For example, if the original draft is three sheets of paper with an image on each side of each sheet, then the copy is six sheets with only one image on one side of each sheet.
  • 2 sided to 2 sided —The original page has printing on both sides. The copy mimics the original exactly.

Sets two or four sheets of an original document together on the same page

Off 2 on 1 Portrait 2 on 1 Landscape 4 on 1 Portrait 4 on 1 Landscape

Show 7 more labels / short text on this page
Menu item Description · Factory Defaults · Menu item Description · Content · Text Text/Photo Photograph · Sides (Duplex) · Paper Saver
Page 140 of the Lexmark 356 user manual — Copy Settings menu
Page 140 · click to enlarge
Page 140

Understanding printer menus 140

Specifies whether a border is printed around the edge of the page at the margins

Keeps the pages of a print job stacked in sequence when making multiple copies of the job

Specifies the paper size of the original document

Letter Legal Executive Folio Statement Universal ID Card 4 x 6 in. 3 x 5 in. Business Card Custom Scan Size A4 A5 Oficio (Mexico) A6 JIS B5

  • Letter is the US factory default setting. A4 is the international factory default setting.
  • A setting with an * indicates it is the current default setting.

Specifies the paper source for copy jobs

Tray Single Sheet Feeder Multi Sheet Feeder

Places a sheet of paper between transparencies

Places a sheet of paper between pages, copies, or jobs based on the value selected

None Between Copies Between Jobs Between Pages

Specifies a paper source

Tray Manual Feeder

Specifies the level of darkness for the copy job

‑4 to +4

1–999 Specifies the number of copies for the copy job

Show 13 more labels / short text on this page
Menu item Description · Print Page Borders · On Off · Collate · On Off · Original Size · Paper Source · Transparency Separators · On Off · Separator Sheets · Separator Source · Darkness · Number of Copies
Page 141 of the Lexmark 356 user manual — General Fax Settings
Page 141 · click to enlarge
Page 141

Understanding printer menus 141

Specifies overlay text that is printed on each page of the copy job

Off Confidential Copy Draft Urgent Custom

Allows interruption of a print job to copy a page or document

Adjusts the amount of background visible on a copy

‑4 to +4

Specifies the amount of color from ‑4 to +4.

Specifies the contrast used for the copy job

0–5 Best for content

Adjusts the amount of shadow detail visible on a copy

‑4 to +4

Specifies if the original document is scanned edge-to‑edge prior to copying

Scan edge to edge

1–5 Adjusts the amount of sharpness on a copy

Fax Settings menu

General Fax Settings

Station Name Specifies the name of the fax within the printer

Station Number Specifies a number associated with the fax

Specifies how the fax is identified

Station Name Station Number

Show 13 more labels / short text on this page
Menu item Description · Overlay · Allow priority copies · On Off · Background Removal · Color Balance · Cyan–Red Magenta–Green Yellow–Blue · Contrast · Shadow Detail · On Off · Sharpness · Menu item Description · Station ID
Page 142 of the Lexmark 356 user manual — Fax Send Settings
Page 142 · click to enlarge
Page 142

Understanding printer menus 142

Sets the printer to fax manually only, which requires a line splitter and a telephone hand set

  • Off is the factory default setting.
  • Use a regular telephone to answer an incoming fax job and to dial a fax number.
  • Touch # 0 on the numeric keypad to go directly to the Manual Fax function.

Defines the amount of non-volatile memory used to fax a job

All receive Mostly receive Equal Mostly sent All send

  • “All receive” specifies that all the memory is set to receive fax jobs.
  • “Mostly receive” specifies that most of the memory is set to receive fax jobs.
  • Equal is the factory default setting. Equal splits the memory for sending and receiving fax jobs into equal amounts.
  • “Mostly sent” specifies that most of the memory is set to send fax jobs.
  • “All send” specifies that all the memory is set to send fax jobs.

Specifies whether the printer may cancel fax jobs

Specifies the type of caller ID being used

FSK DTMF

Fax Send Settings

Specifies quality in dots per inch (dpi). A higher resolution gives greater print quality, but it increases the fax transmission time for outgoing faxes.

Standard Fine Super Fine Ultra Fine

Show 9 more labels / short text on this page
Menu item Description · Enable Manual Fax · On Off · Memory Use · Cancel Faxes · Allow Don't Allow · Caller ID · Menu item Description · Resolution
Page 143 of the Lexmark 356 user manual — Fax Settings menu
Page 143 · click to enlarge
Page 143

Understanding printer menus 143

Specifies the paper size of the document that is being scanned

Letter Legal Executive Mixed Letter/Legal Folio Statement A4 A5 A6 Oficio (Mexico) JIS B5 4 x 6 3 x 5 ID Card Universal Custom Scan Size Business Card

Specifies how the text and graphics are oriented on the page

Off Long edge Short edge

  • Off is the factory default setting.
  • Long edge assumes binding along the long edge of the page (left edge for portrait orientation and top edge for landscape orientation).
  • Short edge assumes binding along the short edge of the page (top edge for portrait orientation and left edge for landscape orientation).

Specifies the type of content that will be scanned to fax

  • Text is used when the document is mostly text.
  • Text/Photo is the factory default setting. Text/Photo is used when the documents are mostly text or line art.
  • Photograph is used when the document is a high-quality photograph or inkjet print.

Lightens or darkens the output

‑4 to +4

A numeric entry field is provided to enter numbers

0–9 Specifies the number of times the printer tries to send the fax to a specified number

1–200 Specifies the number of minutes between redials

Show 10 more labels / short text on this page
Menu item Description · Original Size · Duplex · Content · Text Text/Photo Photograph · Darkness · Dial Prefix · <none> · Automatic Redial · Redial Frequency
Page 144 of the Lexmark 356 user manual — Fax Settings menu
Page 144 · click to enlarge
Page 144

Understanding printer menus 144

Enables switchboard blind dialing without a dial tone

Enables Error Correction Mode for fax jobs

Lets you send faxes by scanning at the printer

Allows driver to fax jobs to be sent by the printer

Specifies the dialing sound, either as a tone or a pulse

Specifies the maximum speed in baud at which faxes are sent

2400 4800 9600 14400 33600

Adjusts the amount of background visible on a copy

‑4 to +4

Specifies the contrast of the output

Best for content 0–5

Adjusts the amount of shadow detail visible on a copy

‑4 to +4

Scan edge to edge

Specifies if the original document is scanned edge-to-edge

1–5 Adjusts the amount of sharpness on a fax

Enable Color Fax Scans

Auto Convert Color Faxes to Mono Faxes

Converts all outgoing faxes to black and white

Show 20 more labels / short text on this page
Menu item Description · Behind a PABX · Yes No · Enable ECM · Yes No · Enable Fax Scans · On Off · Driver to fax · Yes No · Dial Mode · Tone Pulse · Max Speed · Background Removal · Contrast · Shadow Detail · On Off · Sharpness · Enables color faxing · On Off · On Off
Page 145 of the Lexmark 356 user manual — Fax Receive Settings
Page 145 · click to enlarge
Page 145

Understanding printer menus 145

Fax Receive Settings

Allows fax jobs to be received by the printer

1–25 Specifies the number of rings before answering an incoming fax job

Allows the printer to answer an incoming fax job

1–9 Lets you enter a code on the telephone number pad to begin receiving a fax

  • This menu item is used when the printer shares a line with a telephone
  • 9 is the factory default setting

Scales an incoming fax job so it fits the size of the paper loaded in the designated fax source

Specifies the paper source selected to supply paper for the printer to print an incoming fax

Auto Size Match Tray Single Sheet Feeder Multi‑Page Feeder

Enables duplex (two-sided) printing for incoming fax jobs

Prints the transmission information at the bottom of each page from a received fax

Specifies the maximum speed in baud at which faxes are received

2400 4800 9600 14400 33600

Block No Name Fax

Enables blocking of incoming faxes sent from devices with no station ID specified

Show 16 more labels / short text on this page
Menu item Description · Enable Fax Receive · On Off · Rings to Answer · Auto Answer · Yes No · Manual Answer Code · Auto Reduction · On Off · Paper Source · Sides · On Off · Fax Footer · On Off · Max Speed · On Off
Page 146 of the Lexmark 356 user manual — Speaker Settings
Page 146 · click to enlarge
Page 146

Understanding printer menus 146

Fax Log Settings

Enables printing of a transmission log after each fax job

Print log Do not print log Print only for error

Enables printing of a receive error log following a receive error

Print Never Print on Error

Enables automatic printing of fax logs

Selects the source of the paper used for printing logs

Specifies whether printed logs display the dialed number or the station name

Remote Station Name Dialed Number

Enables access to the Fax Job log

Enables access to the Fax Call log

Speaker Settings

Always Off On until Connected Always On

  • Always Off turns the speaker off.
  • “On until Connected” is the factory default setting. The speaker is on and issues a noise until the fax connection is made.
  • Always On turns the speaker on.

Controls the volume setting

Controls the ringer volume for the fax speaker

Show 18 more labels / short text on this page
Menu item Description · Transmission Log · Receive Error Log · Auto Print Logs · On Off · Log Paper Source · Tray <x> · Logs Display · Enable Job Log · On Off · Enable Call Log · On Off · Menu item Description · Speaker Mode · Speaker Volume · High Medium Low · Ringer Volume · On Off
Page 147 of the Lexmark 356 user manual — Scan Settings
Page 147 · click to enlarge
Page 147

Understanding printer menus 147

Distinctive Rings

Answers calls with a one‑ring pattern

Answers calls with a double‑ring pattern

Triple Ring answers calls with a triple‑ring pattern

Flash Drive menu

Flash Drive menu

Enables or disables the USB port on the front of the printer

  • Certain options are not available on selected printer models.
  • Enable is the factory default setting

Enables or disables the ability of the printer to update its firmware code from a USB device

Scan Settings

Specifies the format of the file

PDF (.pdf) TIFF (.tif) JPEG (.jpg)

1.2–1.6 Sets the version of the PDF file that will be scanned to USB

Specifies the type of content that will be scanned to USB

  • Text is used when the document is mostly text.
  • Text/Photo is the factory default setting. Text/Photo is used when the documents are mostly text or line art.
  • Photograph is used when the document is a high-quality photograph or inkjet print.
Show 17 more labels / short text on this page
Menu item Description · Single Ring · On Off · Double Ring · On Off · Triple Ring · On Off · Menu item Description · Enable Drive · Enable Disable · Update Code · Enable Disable · Menu item Description · Format · PDF Version · Content · Text Text/Photo Photograph
Page 148 of the Lexmark 356 user manual — Flash Drive menu
Page 148 · click to enlarge
Page 148

Understanding printer menus 148

Specifies whether a job prints in grayscale or color

Specifies how many dots per inch are scanned

75 150 200 300 400 600

Lightens or darkens the output

‑4 to +4

Specifies the orientation of the scanned image

Specifies the paper size of the document that is being scanned

Letter Legal Executive Folio Statement Universal 4 x 6 in. 3 x 5 in. Business Card Custom Scan Size A4 A5 Oficio (Mexico) A6 JIS B5

Specifies how the text and graphics are oriented on the page

Off Long edge Short edge

  • Off is the factory default setting.
  • Long edge assumes binding along the long edge of the page (left edge for portrait orientation and top edge for landscape orientation).
  • Short edge assumes binding along the short edge of the page (top edge for portrait orientation and left edge for landscape orientation).
Show 9 more labels / short text on this page
Menu item Description · Color · Gray Color · Resolution · Darkness · Orientation · Portrait Landscape · Original Size · Sides (Duplex)
Page 149 of the Lexmark 356 user manual — Print Settings
Page 149 · click to enlarge
Page 149

Understanding printer menus 149

JPEG Quality Text or Text/Photo

5–90 Sets the quality of a JPEG text or text/photo image in relation to file size and the quality of the image.

  • 75 is the factory default setting.
  • 5 reduces the file size, but the quality of the image is lessened.
  • 90 provides the best image quality, but the file size is very large.

5–90 Sets the quality of a JPEG photo image in relation to file size and the quality of the image

  • 50 is the factory default setting.
  • 5 reduces the file size, but the quality of the image is lessened.
  • 90 provides the best image quality, but the file size is very large.

Use Multi‑Page TIFF

Provides a choice between single-page TIFF files and multiple‑page TIFF files. For a multiple-page scan to USB job, either one TIFF file is created containing all the pages, or multiple TIFF files are created with one file for each page of the job.

  • On is the factory default setting.
  • This menu item applies to all scan functions.

Enables the Text/Photo mode to have smaller file sizes by using 1‑bit images when Color is set to Off

8 bit 1 bit

Adjusts the amount of background visible on a copy

‑4 to +4

Specifies the contrast of the output

0–5 Best for content

Adjusts the amount of shadow detail visible on a scanned image

‑4 to +4

Scan edge to edge

Specifies if the original document is scanned edge-to-edge

1–5 Adjusts the sharpness of a scanned image

Print Settings

Copies Specifies the number of copies to print

Show 10 more labels / short text on this page
Menu item Description · Photo JPEG Quality · On Off · Scan bit Depth · Background Removal · Contrast · Shadow Detail · On Off · Sharpness · Menu item Description
Page 150 of the Lexmark 356 user manual — Finishing menu
Page 150 · click to enlarge
Page 150

Understanding printer menus 150

Enables duplex (two-sided) printing

2 sided 1 sided

Print Settings

Setup menu

Determines which printer language the print server uses to send data to the printer

PS Emulation PCL Emulation PPDS Emulation

Determines the print area on paper

Normal Fit to Page Whole Page

Collects permanent resources that have been downloaded on the printer and automatically writes them to the flash drive

Saves the permanently downloaded resources

Finishing menu

Specifies whether duplex (2‑sided) printing is set as the default for all print jobs

2 Sided 1 Sided

Defines the way duplexed pages are bound and how the printing on the back of the page is oriented in relation to the printing on the front of the page

Long Edge Short Edge

  • Long Edge is the factory default setting.
  • Long Edge specifies that binding be placed on the left edge of portrait pages and the top edge of landscape pages.
  • Short Edge specifies that binding be placed on the top edge of portrait pages and the left edge of landscape pages.
Show 12 more labels / short text on this page
Menu item Description · Sides (Duplex) · Menu item Description · Printer Language · Print Area · Download Target · RAM Flash · Resource Save · On Off · Menu item Description · Sides · Duplex Binding
Page 151 of the Lexmark 356 user manual — Print Settings
Page 151 · click to enlarge
Page 151

Understanding printer menus 151

1–999 Specifies a default number of copies for each print job

Specifies whether blank pages are inserted in a print job

Do Not Print Print

Stacks the pages of a print job in sequence when printing multiple copies

  • Off is the factory default setting. No pages will be collated.
  • The On setting stacks the print job sequentially.
  • Both settings print the entire job the number of times specified by the Copy menu setting.

Specifies whether blank separator sheets are inserted

None Between Copies Between Jobs Between Pages

  • None is the factory default setting.
  • Between Copies inserts a blank sheet between each copy of a print job if Collation is set to On. If Collation is set to Off, a blank page is inserted between each set of printed pages, such as after all page 1's, all page 2's, and so on.
  • Between Jobs inserts a blank sheet between print jobs.
  • Between Pages inserts a blank sheet between each page of the print job. This setting is useful when printing transparencies or inserting blank pages in a document for notes.

Specifies the paper source for separator sheets

Tray Multi‑Page Feeder

Specifies that multiple‑page images are printed on one side of a sheet of paper

Off 2 Up 4 Up 6 Up 9 Up 16 Up

  • The number selected is the number of page images that will print per side
  • Off is the factory default setting.

N‑Up Ordering

Specifies how the page images appear on the physical page

Horizontal Reverse Horizontal Reverse Vertical Vertical

Show 8 more labels / short text on this page
Menu item Description · Copies · Blank Pages · Collate · On Off · Separator Sheets · Separator Source · N‑Up
Page 152 of the Lexmark 356 user manual — Quality menu
Page 152 · click to enlarge
Page 152

Understanding printer menus 152

Specifies the orientation of a multiple‑page sheet

  • Auto is the factory default setting. The printer chooses between portrait and landscape.
  • Long Edge uses landscape.
  • Short Edge uses portrait.

N‑Up Border

Prints a border around each page image

Quality menu

Adjusts the color output on the printed page

  • Auto is the factory default setting. Auto applies different color conversion tables to each object on the printed page.
  • Off turns off color correction.
  • Manual allows customization of the color tables using the settings available from the Manual Color menu.
  • Due to the differences in additive and subtractive colors, certain colors that appear on computer monitors are impossible to duplicate on the printed page.

Specifies the printed output resolution

4800 CQ 1200 dpi

1–5 Lightens or darkens the printed output

  • 4 is the factory default setting.
  • Selecting a smaller number can help conserve toner.

Creates smoother lines with sharper edges

  • Off is the factory default setting.
  • This feature improves the printed output of CAD-type drawings (e.g. circuit diagrams, architectural prints, etc.).

Reduces the amount of toner used for graphics and images. The amount of toner used for text is not reduced.

  • Off is the factory default setting.
  • On overrides Toner Darkness settings.
Show 13 more labels / short text on this page
Menu item Description · Orientation · Auto Landscape Portrait · None Solid · Menu item Description · Color Correction · Auto Off Manual · Print Resolution · Toner Darkness · Enhance Fine Lines · On Off · Color Saver · On Off
Page 153 of the Lexmark 356 user manual — Quality menu
Page 153 · click to enlarge
Page 153

Understanding printer menus 153

Adjusts brightness in color outputs

‑6 to +6

  • 0 is the factory default setting.
  • This menu item does not affect files that use CMYK color specifications.

0–5 Adjusts contrast in color outputs

  • 0 is the factory default setting.
  • This menu item does not affect files that use CMYK color specifications.

0–5 Adjusts saturation in color outputs

  • 0 is the factory default setting.
  • This menu item does not affect files that use CMYK color specifications.

Lets you make subtle color adjustments to the printer output by individually altering the amount of toner being used for each color plane. Specifies the amount of color from ‑5 to +5.

Cyan Magenta Yellow Black Reset Defaults

Prints sample pages for each of the RGB and CMYK color conversion tables used in the printer

sRGB Display sRGB Vivid Display—True Black Vivid Off—RGB US CMYK Euro CMYK Vivid CMYK Off—CMYK

  • Selecting any setting prints the sample.
  • Color samples consist of a series of colored boxes along with the RGB or CMYK combination that creates the color observed. These pages can be used to help decide which combinations to use to get the desired printed output.
  • From a browser window, type the IP address of the printer to access a complete list of color sample pages from the Embedded Web Server.
Show 6 more labels / short text on this page
Menu item Description · RGB Brightness · RGB Contrast · RGB Saturation · Color Balance · Color Samples
Page 154 of the Lexmark 356 user manual — Utilities menu
Page 154 · click to enlarge
Page 154

Understanding printer menus 154

Customizes the RGB color conversions. The values for each setting are:

RGB Image RGB Text RGB Graphics

Vivid sRGB Display Display—True Black sRGB Vivid Off

  • Vivid applies a color conversion table that produces brighter, more saturated colors.
  • sRGB Display is the factory default setting for RGB Image. This applies a color conversion table to an output that matches the colors displayed on a computer monitor.
  • Display—True Black applies a color conversion table that uses only black toner for neutral gray colors.
  • sRGB Vivid is the factory default setting for RGB Text and RGB Graphics. sRGB Vivid applies a color table that increases saturation. This is preferred for business graphics and text.
  • Off turns off color conversion.

Customizes the CMYK color conversions. The values for each setting are:

CMYK Image CMYK Text CMYK Graphics

USCMYK EuroCMYK Vivid CMYK Off

  • USCMYK is the US factory default setting
  • EuroCMYK is the International factory default setting
  • Vivid CMYK applies a color conversion table that produces brighter, more saturated colors.
  • Off turns off color conversion.

Color Adjust Initiates an automatic color adjust calibration.

Utilities menu

Assists in isolating the source of a print job problem

  • When Hex Trace is activated, all data sent to the printer is printed in hexadecimal and character representation, and control codes are not executed.
  • To exit Hex Trace, turn the printer off.
Show 6 more labels / short text on this page
Menu item Description · Manual Color (RGB) · Manual Color (CMYK) · Menu item Description · Hex Trace · Activate
Page 155 of the Lexmark 356 user manual — PCL Emul menu
Page 155 · click to enlarge
Page 155

Understanding printer menus 155

Provides an estimate of the percentage coverage of cyan, magenta, yellow, and black on a page. The estimate is printed on a separator page.

  • Off is the factory default setting.
  • This menu item is not available on selected printer models.

PDF menu

Scales page content to fit the selected page size

Specifies whether to print annotations in the PDF

Do Not Print Print

PostScript menu

Prints a page containing the PostScript error

Enhances the contrast and sharpness of low‑resolution images and smooths their color transitions

  • Off is the factory default setting.
  • Image Smoothing has no effect on images that are 300 dpi or higher in resolution.

PCL Emul menu

Specifies the set of fonts used by the Font Name menu item

  • Resident is the factory default setting. It shows the factory default set of fonts downloaded into RAM.
  • Download shows all the fonts downloaded into RAM.
  • All shows all fonts available to any option.
Show 15 more labels / short text on this page
Menu item Description · Coverage Estimator · Off On · Menu item Description · Scale to Fit · No Yes · Annotations · Menu item Description · Print PS Error · On Off · Image Smoothing · On Off · Menu item Description · Font Source · Resident Download All
Page 156 of the Lexmark 356 user manual — 10U PC ‑ 8 12U PC ‑ 850
Page 156 · click to enlarge
Page 156

Understanding printer menus 156

Identifies a specific font and the option where it is stored

  • RO Courier is the factory default setting.
  • RO Courier shows the font name, font ID, and storage location in the printer. The font source abbreviation is R for Resident, F for Flash, and D for Download.

Specifies the symbol set for each font name

10U PC ‑ 8 12U PC ‑ 850

  • 10U PC ‑ 8 is the US factory default setting.
  • 12U PC ‑ 850 is the international factory default setting.
  • A symbol set is a set of alphabetic and numeric characters, punctuation, and special symbols. Symbol sets support the different languages or specific programs such as math symbols for scientific text. Only the supported symbol sets are shown.

Changes the point size for scalable typographic fonts

1.00–1008.00

  • 12 is the factory default setting.
  • Point Size refers to the height of the characters in the font. One point equals approximately 1/72 of an inch.
  • Point sizes can be increased or decreased in 0.25 ‑ point increments.

Specifies the font pitch for scalable monospaced fonts

0.08–100

  • 10 is the factory default setting.
  • Pitch refers to the number of fixed ‑ space characters per inch (cpi).
  • Pitch can be increased or decreased in 0.01 ‑ cpi increments.
  • For nonscalable monospaced fonts, the pitch appears on the display but cannot be changed.

Specifies the orientation of text and graphics on the page

  • Portrait is the factory default setting.
  • Portrait prints text and graphics parallel to the short edge of the page.
  • Landscape prints text and graphics parallel to the long edge of the page.

Specifies the number of lines that print on each page

  • 60 is the US factory default setting. 64 is the international factory default setting.
  • The printer sets the amount of space between each line based on the Lines per Page, Paper Size, and Orientation settings. Select the desired Paper Size and Orientation before setting Lines per Page.
Show 14 more labels / short text on this page
Menu item Description · Font Name · RO Courier · Symbol Set · PCL Emulation Settings · Point Size · PCL Emulation Settings · Pitch · PCL Emulation Settings · Orientation · Portrait Landscape · PCL Emulation Settings · Lines per Page · 1–255 60 64
Page 157 of the Lexmark 356 user manual — PDF menu
Page 157 · click to enlarge
Page 157

Understanding printer menus 157

Sets the printer to print on A4‑size paper

198 mm 203 mm

  • 198 mm is the factory default setting.
  • The 203 ‑ mm setting sets the width of the page to allow the printing of eighty 10 ‑ pitch characters.

Specifies whether the printer automatically performs a carriage return (CR) after a line feed (LF) control command

Auto CR after LF

  • Off is the factory default setting.
  • Setting alterations are duplicated in the PPDS menu.

Specifies whether the printer automatically performs a line feed (LF) after a carriage return (CR) control command

Auto LF after CR

  • Off is the factory default setting.
  • Setting alterations are duplicated in the PPDS menu.

Configures the printer to work with printer software or programs that use different source assignments for trays, drawers, and feeders

Off None 0–199 Assign Tray

  • Off is the factory default setting.
  • None is not an available selection. It is displayed only when it is selected by the PCL 5 interpreter.
  • None ignores the Select Paper Feed command.
  • 0–199 allows a custom setting to be assigned.

Off None 0–199 Assign Manual Paper

Off None 0–199 Assign Man Env

Displays the factory default setting assigned to each tray, drawer, or feeder

Returns all tray, drawer, and feeder assignments to the factory default settings

Show 16 more labels / short text on this page
Menu item Description · PCL Emulation Settings · A4 Width · PCL Emulation Settings · On Off · PCL Emulation Settings · On Off · Tray Renumber · Assign MP Feeder · Off None 0–199 · Tray Renumber · View Factory Def · None · Tray Renumber · Restore Defaults · Yes No
Page 158 of the Lexmark 356 user manual — PictBridge menu
Page 158 · click to enlarge
Page 158

Understanding printer menus 158

Image menu

Selects the optimal paper size, scaling, and orientation

  • On is the factory default setting.
  • The On setting overrides scaling and orientation settings for some images.

Inverts bi‑tonal monochrome images

  • Off is the factory default setting.
  • The font size can be increased in 1 ‑ point increments.
  • This setting does not apply to GIF or JPEG images.

Scales the image to fit the selected paper size

Anchor Top Left Best Fit Anchor Center Fit Height/Width Fit Height Fit Width

Sets the image orientation

Portrait Landscape Rev Portrait Rev Landscape

PictBridge menu

Controls the printed size of each photo printed from a PictBridge‑enabled device

Auto L 2L Hagaki Postcard Card Size 100 x 150 mm 4 x 6 in 8 x 10 in Letter A4 A5 JIS B5

  • Auto is the factory default setting.
  • If both the printer and the PictBridge ‑ enabled camera have a value for this setting, the value in the camera supersedes the value in the printer.
Show 9 more labels / short text on this page
Menu item Description · Auto Fit · On Off · Invert · On Off · Scaling · Orientation · Menu item Description · Photo Size
Page 159 of the Lexmark 356 user manual — Set Date and Time
Page 159 · click to enlarge
Page 159

Understanding printer menus 159

Determines the maximum number of images that can print on one side of paper

Auto Off 2 Up 3 Up 4 Up 6 Up 9 Up 12 Up 16 Up Index Print

  • Auto is the factory default setting.
  • If both the printer and the PictBridge ‑ enabled camera have a value for this setting, the value in the camera supersedes the value in the printer.

Determines which resolution, toner darkness, and color saver values the device uses when printing photos sent from a PictBridge‑enabled device

  • Normal is the factory default setting.
  • If both the printer and the PictBridge ‑ enabled camera have a value for this setting, the value in the camera supersedes the value in the printer.

Identifies the printer default input source when printing photos from a PictBridge‑enabled device

MP Feeder Tray Manual Paper

  • MP Feeder is the factory default setting.
  • A photo size larger than the size of the media installed in the printer input source cannot be selected.

Set Date and Time

View Date/Time Displays the time in YYYY‑MM‑DD HH:MM format

Instructs the printer to run the setup wizard

  • Yes is the factory default setting.
  • After completing the setup wizard by selecting Done at the Country/Region select screen, the default becomes No.
Show 8 more labels / short text on this page
Menu item Description · Layout · Quality · Normal Draft Fine · Paper Source · Menu item Description · Set Date/Time · Yes No
Page 160 of the Lexmark 356 user manual — Set Date and Time
Page 160 · click to enlarge
Page 160

Understanding printer menus 160

Time Zone (North, Central, and South America)

Specifies the time zone for the fax

Hawaii * Alaska Tijuana (PST) USA/Canada PST USA/Canada MST USA/Canada CST USA/Canada EST Canada AST Caracas (VET) Newfoundland (NST) Brasilia (BRT)

Time Zone (Europe and Africa)

Specifies the time zone for the fax

Azores (AZOT) Praia (CVT) * GMT (*) Dublin, Ireland London (BST) Western Europe Central Europe Eastern Europe Cairo (EET) Pretoria (SAST) * Moscow (MSK)

Specifies the time zone for the fax

Jerusalem (IST) Abu Dhabi GIST)* Kabul (AFT) * Islamabad (PKT) * New Delhi (IST) * Kathmandu (NPT) * Astana (ALMT) * Yangon (MMT) * Bangkok (ICT) * Beijing (CST) * Seoul (KST) * Tokyo (JST) *

Menu item Description · Time Zone (Asia)

Page 161 of the Lexmark 356 user manual — Set Date and Time
Page 161 · click to enlarge
Page 161

Understanding printer menus 161

Time Zone (Australia and the Pacific region)

Specifies the time zone for the fax

Australia WST Australia CST Darwin (CST) * Australia EST Queensland (EST) * Tasmania (EST) Wellington (NZST) Not Listed

Accommodates Daylight Savings Time changes

Lets the printer clock synchronize with the Network Time Protocol (NTP) server

Show 5 more labels / short text on this page
Menu item Description · Observe DST · On Off · Enable NTP · On Off
Page 162 of the Lexmark 356 user manual — Clock battery
Page 162 · click to enlarge
Page 162

Understanding printer messages 162

Understanding printer messages

List of status and error messages

Access USB after scan

A USB drive was inserted into the printer while the printer was scanning. From the keypad, press 1 to open the drive after scanning, or press 2 to ignore the USB drive.

Access USB now

A USB drive was inserted into the printer while the printer was setting up a job (copy, fax, e‑mail, or FTP) or while in the menus. From the keypad, press 1 to release job resources and access the USB drive directly, or press 2 to ignore the USB drive and return to the job being set up.

Busy

Wait for the message to clear.

Calibrating

Wait for the message to clear.

Call complete

A fax call is completed. Wait for the message to clear.

Cancel not available

Wait for the message to clear.

Canceling

Wait for the message to clear.

Check Config ID

The printer configuration ID is invalid. Contact Customer Support.

Clock battery

The real‑time clock in the printer has a malfunctioning battery. This message appears until the real‑time clock battery is replaced.

Page 163 of the Lexmark 356 user manual — Imaging Kit
Page 163 · click to enlarge
Page 163

Understanding printer messages 163

Close door

Close the upper and lower doors.

<color> Low

Replace the toner cartridge, and then wait for the message to clear.

Dialing

A fax number is dialed. If the number is too long to fit on the screen, only the word Dialing appears. Wait for the message to clear.

DO NOT TOUCH

The printer is receiving a code to update a file. Wait for the message to clear.

Fax complete

A fax that was sent or received is complete. Wait for the message to clear.

Fax failed

The fax failed to be sent. Wait for the message to clear.

Flushing buffer

Wait for the message to clear.

File corrupt

A file with a valid extension is detected, but the actual file type does not match the extension, or the file is corrupt.

Hex Trace

The printer is in Hex Trace mode.

With Hex Trace selected, all data sent to the printer is printed in hexadecimal and character representation. This is used to help isolate the source of a print job problem.

To exit Hex Trace, turn the printer off, wait about 10 seconds, and then turn the printer on.

Imaging Kit

Replace the imaging kit, and then press to clear the message and continue printing.

Page 164 of the Lexmark 356 user manual — Load single sheet feeder with <x>
Page 164 · click to enlarge
Page 164

Understanding printer messages 164

Incoming call

This message appears when using manual fax mode. Press to print a black only fax or to print a color fax.

Insert Tray <x>

Insert the specified tray into the printer.

Invalid Engine Code

The engine code is invalid. Contact Customer Support.

Invalid Network Code

The network code is invalid. Contact Customer Support.

LADP connection error

The LADP server information is present but the printer is unable to communicate with the server, or the communication ended before the return of the search results.

  • Wait for the message to clear and try searching for the address again.
  • Contact your system support person.

Line busy

A fax number is dialed, but the fax line is busy. Wait for the message to clear.

Load <src> with <x>

Try one or more of the following:

  • Load the paper tray or other source with the correct paper type and size.
  • Press , and then press to cancel printing.

Load single sheet feeder with <x>

Try one or more of the following:

  • Load the manual feeder with the correct paper type and size.

If no paper is in the manual feeder, load a sheet, and then press to clear the message and continue printing. • Press to clear the message and continue printing.

  • The printer manually overrides the manual request, and then the job prints from an automatic source.
  • Press , and then press to cancel printing.
  • Define a name for each custom type (Custom 1–6) using the MarkVision utility. When the printer is prompting for one of the custom types, which has been named, then only the custom name is displayed.
Page 165 of the Lexmark 356 user manual — PC Kit Life Warning
Page 165 · click to enlarge
Page 165

Understanding printer messages 165

Maintenance

The printer needs maintenance. Call for service.

Memory full, cannot send faxes

  • The printer fax memory is full. Press to clear the message and cancel the fax.
  • Reduce the fax resolution and try to send the fax again.
  • Reduce the number of pages in the fax and try to send the fax again.

Menus disabled

The printer menus are disabled. The printer settings cannot be changed from the printer control panel. Contact your system support person for help.

No analog phone line

The analog phone line was not detected; the fax is disabled. Connect the printer to an analog phone line.

No answer

A fax number is dialed, but no connection is made. Wait for the message to clear.

No dial tone

The printer does not have a dial tone. Wait for the message to clear.

No recognized file types

Either there are no files saved on the USB drive, or the files saved are not supported. Convert files to any of the following supported file types: .pdf, .gif, .jpeg, .jpg, .bmp, .png, .tiff, .tif, .pcx, or .dcx.

PC Kit Life Warning

This is the final warning message for the photoconductor kit. The photoconductor kit is near exhaustion. The printer continues printing unless the value for the Cartridge Alarm is changed from the printer control panel or set to On from the Supply Notifications Web page (located on the Embedded Web Server).

If the setting is On, then the printer stops printing. Press to select Continue. The printer continues to print until the photoconductor kit is completely exhausted. When the photoconductor kit is exhausted, replace it.

Page 166 of the Lexmark 356 user manual — Ready
Page 166 · click to enlarge
Page 166

Understanding printer messages 166

Phone in Use

The telephone attached to the printer is in use, or its handset is off the cradle.

1 Place the handset on the telephone cradle.

2 Press to send a black only fax or to send a color fax.

3 Enter the fax number.

Picture too large

The photo sent to the printer is larger than the current paper size. Press the arrow buttons until Closest photo size or Fit to page appears, and then press .

Power Saver

The printer is saving power while it waits for the next print job.

  • Send a job to print.
  • Touch to warm the printer to normal operating temperature. Afterwards, Ready appears.

Printing error

A job sent from a USB drive was not successfully received. Wait for the message to clear and then try sending the job again.

Programming Code

The printer is receiving a file that is a code update. Wait for the message to clear.

Reading data

A PictBridge enabled device is connected, and the printer is reading data from the device. Wait for the message to clear.

Reading error (Remove drive)

The printer was reading information from a USB drive and encountered an error. The USB drive must be removed from the printer to clear the message.

Ready

The printer is ready to receive print jobs.

Page 167 of the Lexmark 356 user manual — Scan to USB failed
Page 167 · click to enlarge
Page 167

Understanding printer messages 167

Receiving pXX

The printer is receiving a fax. pXX represents the number of pages received. Wait for the message to clear.

Reload printed pages in Tray <x>

  • Press to clear the message and continue processing the second side of the sheet.
  • Press , and then press to cancel printing.

Remote Management Active

The printer is offline while it configures settings. Wait for the message to clear.

Remove originals from the scanner ADF

Remove the paper from the ADF to clear the message and continue printing.

Remove packaging material

Check for and remove any packaging materials from the toner cartridges.

Remove paper from standard output bin

Remove the stack of paper from the standard exit bin.

Replace <color> cartridge

Replace the toner cartridge, and then press to clear the message and continue printing.

Replace PC Kit

This is the early warning message for the photoconductor kit. The printer continues printing unless the value for the Cartridge Alarm is changed from the printer control panel or set to On from the Supply Notifications Web page (located on the Embedded Web Server).

If the setting is On, then the printer stops printing. Press to select Continue and continue printing.

When the PC Kit Life Warning appears, order a new photoconductor kit.

Scan Document Too Long

The scan job exceeds the maximum number of pages. Press , and then press to cancel printing and clear the message.

Scan to USB failed

An attempt to create a file on the USB drive failed.

Page 168 of the Lexmark 356 user manual — Unsupported Mode
Page 168 · click to enlarge
Page 168

Understanding printer messages 168

Try one or more of the following:

  • Re ‑ send the job.
  • Reduce the scan resolution, and then try sending the job again.
  • Remove the USB drive, reconnect it, and then try sending the job again.

Scanner ADF Cover Open

The ADF cover is open. The message clears when the cover is closed.

Sending pXX

The printer is sending a fax. pXX represents the number of pages received. Wait for the message to clear.

Standard Exit Bin Full

Empty the standard exit bin to clear the message and continue printing.

Tray <x> Empty

Try one or more of the following:

  • Load the paper tray or other source with the correct paper type and size.
  • Press , and then press to cancel the current job.

Tray <x> Low

Wait until the printer is not printing, and then load the paper tray or other source with the correct paper type and size.

Tray <x> Missing

Insert the specified tray into the printer.

Unsupported USB device, please remove

Remove the unrecognized USB device.

Unsupported USB hub, please remove

Remove the unrecognized USB hub.

Unsupported Mode

Remove the camera, and then change the mode to PictBridge. Reconnect the camera.

Page 169 of the Lexmark 356 user manual — 34 Short paper
Page 169 · click to enlarge
Page 169

Understanding printer messages 169

USB drive disabled

A USB drive was inserted into the printer, and the port is disabled. Contact your system support person.

Use camera controls to print

A recognized PictBridge‑compatible camera is attached to the printer.

Waiting

The printer has received data to print, but is waiting for an End‑of‑Job command, a Form Feed command, or additional data.

Try one or more of the following:

  • Press to print the contents of the buffer.
  • Cancel the current print job.

Waiting, too many events

Wait for the message to clear.

30.yy <color> cartridge missing

Insert the missing toner cartridge to clear the message and continue printing.

31.yy Defective <color> Cartridge

Replace the defective toner cartridge with a new one.

31 Defective Imaging Kit

Replace the imaging kit.

32.yy Replace Unsupported <color> Cartridge

Replace the unsupported toner cartridge with a supported one.

34 Short paper

The printer paper size setting did not match the length of the paper that entered the printer.

Try one or more of the following:

  • Press to clear the message and continue printing.
  • Press , and then press to cancel printing.
  • Make sure the paper size setting matches the size of the paper in the tray.
Page 170 of the Lexmark 356 user manual — 51 Defective flash detected
Page 170 · click to enlarge
Page 170

Understanding printer messages 170

35 Insufficient memory to support Resource Save feature

The printer lacks sufficient memory to save settings. Install additional memory, or press to disable Resource Save and continue printing.

37 Insufficient memory to collate job

The printer prints the pages that were spooled prior to the collation message and collates the remainder of the print job.

Try one or more of the following:

  • Press to clear the message and continue printing.
  • Press , and then press to cancel printing.

38 Memory Full

The printer does not have enough memory available to continue printing. You cannot press because of this.

Try one or more of the following:

  • Press , and then press to cancel printing.
  • Simplify the print job by reducing the amount of text or graphics on a page and deleting unnecessary downloaded fonts or macros.
  • Install additional printer memory.

39 Complex page, some data may not have printed

The page is too complex to print. Press , and then press to cancel printing.

40 <color> Invalid refill, change cartridge

Replace the toner cartridge with a new one.

50 PPDS Font Error

The printer has encountered a font error because a specific font may not be installed.

Try one or more of the following:

  • Press to clear the message and continue printing.
  • The printer cannot find the requested font. From the PPDS menu, select Best Fit , and then select On . The printer will find a similar font and reformat the affected text.
  • Press , and then press to cancel printing.

51 Defective flash detected

Press to clear the message and continue printing.

Page 171 of the Lexmark 356 user manual — 58 Too many flash options installed
Page 171 · click to enlarge
Page 171

Understanding printer messages 171

52 Not enough free space in flash memory for resources

Try one or more of the following:

  • Press to clear the message and continue printing.
  • Delete fonts, macros, and other data stored in flash memory.
  • Upgrade to a larger capacity flash memory.
  • Press , and then press to cancel printing.

53 Unformatted flash detected

Try one or more of the following:

  • Press to clear the message and continue printing.
  • Format the flash memory. If the message remains, the flash memory may be defective and require replacing.

54 Network <x> Software Error

The printer detects that a network port is installed, but cannot communicate with it. The printer disables all communication to the associated network interface.

Try one or more of the following:

  • Press to clear the message and continue printing.
  • Turn the printer off and then back on to reset the printer.
  • Upgrade (flash) the network firmware in the printer or print server.

56 Standard USB Port Disabled

Try one or more of the following:

  • The printer discards any data received through the USB port. Press to clear the message and continue printing.
  • Make sure the USB Buffer menu item is not set to Disabled.

58 Too many flash options installed

Too many optional flash memory cards or too many optional firmware cards are installed on the printer.

Try one or more of the following:

  • Press to clear the message and continue printing.
  • Remove extra flash options: 1 Turn the printer off. 2 Unplug the power cord from the wall outlet. 3 Remove extra flash options. 4 Connect the power cord to a properly grounded outlet. 5 Turn the printer back on.
Page 172 of the Lexmark 356 user manual — 88.yy Replace <color> Cartridge
Page 172 · click to enlarge
Page 172

Understanding printer messages 172

58 Too many trays attached

1 Turn the printer off.

2 Unplug the power cord from the wall outlet.

3 Remove the additional trays.

4 Connect the power cord to a properly grounded outlet.

5 Turn the printer back on.

58 Input config error

1 Turn the printer off.

2 Unplug the power cord from the wall outlet.

3 Remove and re‑configure the additional trays.

4 Connect the power cord to a properly grounded outlet.

5 Turn the printer back on.

59 Incompatible tray <x>

Only options designed specifically for this printer are supported.

Try one or more of the following:

  • Remove the specified tray.
  • Press to clear the message and continue printing without using the specified tray.

82 Replace waste toner box

Replace the waste toner bottle. For more information, see “Replacing the waste toner bottle” on page 180.

82.yy Waste toner box missing

Replace the waste toner bottle, and then press to clear the message and continue printing.

88.yy <color> Cartridge is low

Press to clear the message and continue printing.

88.yy Replace <color> Cartridge

Replace the toner cartridge.

Page 173 of the Lexmark 356 user manual — 235 Paper Jam Check Duplex
Page 173 · click to enlarge
Page 173

Understanding printer messages 173

150 displayed

The USB drive contains more than 150 files; only 150 files will be displayed.

200.yy Paper jam <area name>

1 Clear the paper path.

2 Press to clear the message and continue printing.

201.yy Paper jam <area name>

1 Clear the paper path.

2 Remove the jammed paper below the fuser.

3 Press to clear the message and continue printing.

202.yy Paper jam <area name>

1 Clear the paper path.

2 Remove the jammed paper from the fuser.

3 Press to clear the message and continue printing.

230.yy Paper jam <area name>

1 Clear the paper path.

2 Open the front door, and then remove the jammed paper.

3 Close the front door.

4 Press to clear the message and continue printing.

235 Paper Jam Check Duplex

An unsupported paper size is jammed in the duplex unit.

1 Open the front door

2 Remove the jam.

3 Load the tray with the correct paper size.

4 Press to continue printing.

Page 174 of the Lexmark 356 user manual — 293.02 Flatbed Cover Open
Page 174 · click to enlarge
Page 174

Understanding printer messages 174

24x Paper Jam Check Tray <x>

1 Pull the tray out.

2 Remove the jammed paper.

3 Insert the tray.

If all jams are cleared, the printer resumes printing.

250.yy Paper jam <area name>

1 Clear the paper path.

2 Open the front door, and then remove the jammed paper.

3 Hold the fuser cover down, and then remove the jammed paper from inside the fuser.

4 Close the fuser cover, and then close the front door.

5 Press to clear the message and continue printing.

290–292 ADF Scanning Jams

The scanner failed to feed one or more pages through the ADF.

1 Remove all pages from the ADF.

2 Flex and fan the pages.

3 Place the pages in the ADF.

4 Adjust the ADF guides.

5 From the printer control panel, press to start a black only job or to start a color job.

293 Paper Missing

The scanner was instructed to scan using the ADF, but there is no paper in the ADF.

1 Flex and fan the pages.

2 Place the pages in the ADF.

3 Adjust the ADF guides.

4 From the printer control panel, press to start a black only job or to start a color job.

293.02 Flatbed Cover Open

Close the scanner cover.

Page 175 of the Lexmark 356 user manual — 840.02 Scanner Auto Disabled
Page 175 · click to enlarge
Page 175

Understanding printer messages 175

294 ADF Jam

This jam location may also be identified as 294.04 Duplex Sensor Off Jam, 294.05 Scan Sensor Off Jam, or 294.06 ADF Backfeed Jam. To clear this jam:

1 Remove all pages from the ADF.

2 Flex and fan the pages.

3 Place the pages in the ADF.

4 Adjust the ADF guides.

5 From the printer control panel, press to start a black only job or to start a color job.

840.01 Scanner Disabled

This message indicates that the scanner has been disabled by the system support person.

840.02 Scanner Auto Disabled

This message indicates the printer identified a problem with the scanner and automatically disabled it.

1 Remove all pages from the ADF.

2 Turn the printer off.

3 Wait 15 seconds and then turn the printer on.

4 Place the document in the ADF.

5 Press to start a black only job or to start a color job.

Press down on the cyan toner cartridge to make sure it is installed properly. Turn the printer off, wait about 10 seconds, and then turn the printer back on

Press down on the magenta toner cartridge to make sure it is installed properly. Turn the printer off, wait about 10 seconds, and then turn the printer back on.

Press down on the yellow toner cartridge to make sure it is installed properly. Turn the printer off, wait about 10 seconds, and then turn the printer back on

Page 176 of the Lexmark 356 user manual — 900–999 Service <message>
Page 176 · click to enlarge
Page 176

Understanding printer messages 176

Press down on the black toner cartridge to make sure it is installed properly. Turn the printer off, wait about 10 seconds, and then turn the printer back on

The cyan toner cartridge needs maintenance. Call for service.

The magenta toner cartridge needs maintenance. Call for service.

The yellow toner cartridge needs maintenance. Call for service.

The black toner cartridge needs maintenance. Call for service.

900–999 Service <message>

1 Turn the printer off.

2 Unplug the power cord from the wall outlet.

3 Check all cable connections.

4 Connect the power cord to a properly grounded outlet.

5 Turn the printer back on.

If the service message appears again, contact Customer Support, and report the message.

Page 177 of the Lexmark 356 user manual — Checking the status of supplies from a network computer
Page 177 · click to enlarge
Page 177

Maintaining the printer 177

Maintaining the printer

Periodically, certain tasks are required to maintain optimum print quality.

Storing supplies

Choose a cool, clean storage area for the printer supplies. Store supplies right side up in their original packing until you are ready to use them.

Do not expose supplies to:

  • Direct sunlight
  • Temperatures above 35°C (95°F)
  • High humidity above 80%
  • Salty air
  • Corrosive gases
  • Heavy dust

Checking the status of supplies

A message appears on the display when a replacement supply item is needed or when maintenance is required.

Checking the status of supplies from the printer control panel

You can check the status of printer supplies by printing a menu settings page:

1 Make sure the printer is on and Ready appears.

2 From the printer control panel, press .

3 Press the arrow buttons until Reports appears, and then press .

4 Press the arrow buttons until Menu Settings Page appears, and then press .

Checking the status of supplies from a network computer

1 Type the printer IP address into the address field of your Web browser.

2 Click Device Status. The Device Status page appears, displaying a summary of supply levels.

Page 178 of the Lexmark 356 user manual — Ordering toner cartridges
Page 178 · click to enlarge
Page 178

Maintaining the printer 178

Ordering supplies

To order supplies in the U.S., contact Lexmark at 1-800-539-6275 for information about Lexmark authorized supplies dealers in your area. In other countries or regions, visit the Lexmark Web Site at www.lexmark.com or contact the place where you purchased the printer.

Ordering toner cartridges

When 88 Cyan Cartridge Low, 88 Magenta Cartridge Low, 88 Yellow Cartridge Low, or 88 Black Cartridge low appears, order a new cartridge.

When 88 Replace Cyan Cartridge, 88 Replace Magenta Cartridge, 88 Replace Yellow Cartridge, or 88 Replace Black Cartridge appears, you must replace the specified toner cartridge.

Lexmark 356 — Ordering toner cartridges diagram (page 178)
Fig. 82 · Ordering toner cartridges

Part name Part number C540, C543, and X543 series C544, X544, and X546 series

Page 179 of the Lexmark 356 user manual — Ordering a waste toner bottle
Page 179 · click to enlarge
Page 179

Maintaining the printer 179

Lexmark 356 — Ordering imaging kits diagram (page 179)
Fig. 83 · Ordering imaging kits

Part name Part number C540, C543, and X543 series C544, X544, and X546 series

Ordering imaging kits

Lexmark 356 — Ordering imaging kits diagram (page 179)
Fig. 84 · Ordering imaging kits

Ordering a waste toner bottle

When 82 Replace Waste Toner appears, order a replacement waste toner bottle. The waste toner bottle must be replaced when 82 Replace Waste Toner appears.

Part name Part number

Waste toner bottle C540X75G

Page 180 of the Lexmark 356 user manual — Replacing the waste toner bottle
Page 180 · click to enlarge
Page 180

Maintaining the printer 180

Replacing supplies

Replacing the waste toner bottle

Replace the waste toner bottle when 82 Replace waste toner appears. The printer will not continue printing until the waste toner bottle is replaced.

1 Unpack the replacement waste toner bottle.

2 Grasp the front door at the side handholds, and then pull it toward you.

Lexmark 356 — Replacing the waste toner bottle diagram (page 180)
Fig. 85 · Replacing the waste toner bottle

3 Open the top door.

Lexmark 356 — Replacing the waste toner bottle diagram (page 180)
Fig. 86 · Replacing the waste toner bottle
Page 181 of the Lexmark 356 user manual — Replacing supplies
Page 181 · click to enlarge
Page 181

Maintaining the printer 181

4 Remove the right side cover.

Lexmark 356 — Replacing supplies diagram (page 181)
Fig. 87 · Replacing supplies

5 Press the green levers on each side of the waste toner bottle, and then remove it.

Lexmark 356 — Replacing supplies diagram (page 181)
Fig. 88 · Replacing supplies

6 Place the waste toner bottle in the enclosed packaging.

Page 182 of the Lexmark 356 user manual — Replacing supplies
Page 182 · click to enlarge
Page 182

Maintaining the printer 182

7 Insert the new waste toner bottle.

Lexmark 356 — Replacing supplies diagram (page 182)
Fig. 89 · Replacing supplies

8 Replace the right side cover.

Lexmark 356 — Replacing supplies diagram (page 182)
Fig. 90 · Replacing supplies

9 Close the top door.

Lexmark 356 — Replacing supplies diagram (page 182)
Fig. 91 · Replacing supplies
Page 183 of the Lexmark 356 user manual — Replacing a black imaging kit
Page 183 · click to enlarge
Page 183

Maintaining the printer 183

10 Close the front door.

Lexmark 356 — Replacing a black imaging kit diagram (page 183)
Fig. 92 · Replacing a black imaging kit

Replacing a black imaging kit

Replace the black imaging kit when Replace Black Imaging Kit appears.

1 Grasp the front door at the side handholds, and then pull it toward you.

Lexmark 356 — Replacing a black imaging kit diagram (page 183)
Fig. 93 · Replacing a black imaging kit
Page 184 of the Lexmark 356 user manual — Replacing a black imaging kit
Page 184 · click to enlarge
Page 184

Maintaining the printer 184

2 Open the top door.

Lexmark 356 — Replacing a black imaging kit diagram (page 184)
Fig. 94 · Replacing a black imaging kit

3 Remove the toner cartridges by lifting the handles, and then gently pulling away from the imaging kit.

Lexmark 356 — Replacing a black imaging kit diagram (page 184)
Fig. 95 · Replacing a black imaging kit

4 Remove the right side cover.

Lexmark 356 — Replacing a black imaging kit diagram (page 184)
Fig. 96 · Replacing a black imaging kit
Page 185 of the Lexmark 356 user manual — Replacing a black imaging kit
Page 185 · click to enlarge
Page 185

Maintaining the printer 185

5 Press the green levers on each side of the waste toner bottle, and then remove it.

Lexmark 356 — Replacing a black imaging kit diagram (page 185)
Fig. 97 · Replacing a black imaging kit

6 Lift the blue levers on the imaging kit, and then pull it toward you.

Lexmark 356 — Replacing a black imaging kit diagram (page 185)
Fig. 98 · Replacing a black imaging kit

7 Press down on the blue levers, grasp the green handles on the sides, and then pull the imaging kit out.

Lexmark 356 — Replacing a black imaging kit diagram (page 185)
Fig. 99 · Replacing a black imaging kit
Page 186 of the Lexmark 356 user manual — Replacing a black imaging kit
Page 186 · click to enlarge
Page 186

Maintaining the printer 186

8 Remove the yellow, cyan, and magenta developer units.

Lexmark 356 — Replacing a black imaging kit diagram (page 186)
Fig. 100 · Replacing a black imaging kit

9 Unpack the replacement black imaging kit.

Leave the packaging on the black developer unit.

10 Gently shake the black developer unit side to side.

11 Remove the red shipping cover from the black developer unit.

Lexmark 356 — Replacing a black imaging kit diagram (page 186)
Fig. 101 · Replacing a black imaging kit

12 Insert the black developer unit.

Lexmark 356 — Replacing a black imaging kit diagram (page 186)
Fig. 102 · Replacing a black imaging kit
Page 187 of the Lexmark 356 user manual — Replacing a black imaging kit
Page 187 · click to enlarge
Page 187

Maintaining the printer 187

13 Replace the yellow, cyan, and magenta developer units.

Lexmark 356 — Replacing a black imaging kit diagram (page 187)
Fig. 103 · Replacing a black imaging kit

14 Place the used black imaging kit in the enclosed package.

15 Align and insert the imaging kit.

Lexmark 356 — Replacing a black imaging kit diagram (page 187)
Fig. 104 · Replacing a black imaging kit

16 Rotate the blue levers down until the imaging kit drops into place.

Page 188 of the Lexmark 356 user manual — Replacing a black imaging kit
Page 188 · click to enlarge
Page 188

Maintaining the printer 188

17 Replace the waste toner bottle.

Lexmark 356 — Replacing a black imaging kit diagram (page 188)
Fig. 105 · Replacing a black imaging kit

18 Replace the right side cover.

Lexmark 356 — Replacing a black imaging kit diagram (page 188)
Fig. 106 · Replacing a black imaging kit

19 Replace the toner cartridges.

Lexmark 356 — Replacing a black imaging kit diagram (page 188)
Fig. 107 · Replacing a black imaging kit
Page 189 of the Lexmark 356 user manual — Replacing a black and color imaging kit
Page 189 · click to enlarge
Page 189

Maintaining the printer 189

20 Close the top door.

Lexmark 356 — Replacing a black and color imaging kit diagram (page 189)
Fig. 108 · Replacing a black and color imaging kit

21 Close the front door.

Lexmark 356 — Replacing a black and color imaging kit diagram (page 189)
Fig. 109 · Replacing a black and color imaging kit

Replacing a black and color imaging kit

Replace the black and color imaging kit when Replace Color Imaging Kit appears.

1 Grasp the front door at the side handholds, and then pull it toward you to open it.

Page 190 of the Lexmark 356 user manual — Replacing a black and color imaging kit
Page 190 · click to enlarge
Page 190

Maintaining the printer 190

Lexmark 356 — Replacing a black and color imaging kit diagram (page 190)
Fig. 110 · Replacing a black and color imaging kit

2 Open the top door.

Lexmark 356 — Replacing a black and color imaging kit diagram (page 190)
Fig. 111 · Replacing a black and color imaging kit

3 Remove the toner cartridges by lifting the handles, and then gently pulling away from the imaging kit.

Lexmark 356 — Replacing a black and color imaging kit diagram (page 190)
Fig. 112 · Replacing a black and color imaging kit
Page 191 of the Lexmark 356 user manual — Replacing a black and color imaging kit
Page 191 · click to enlarge
Page 191

Maintaining the printer 191

4 Remove the right side cover.

Lexmark 356 — Replacing a black and color imaging kit diagram (page 191)
Fig. 113 · Replacing a black and color imaging kit

5 Press the green levers on each side of the waste toner bottle, and remove it.

Lexmark 356 — Replacing a black and color imaging kit diagram (page 191)
Fig. 114 · Replacing a black and color imaging kit

6 Lift the blue levers on the imaging kit, and then pull it toward you.

Lexmark 356 — Replacing a black and color imaging kit diagram (page 191)
Fig. 115 · Replacing a black and color imaging kit

7 Press down on the blue levers, grasp the green handles on the sides, and then pull the imaging kit out.

Page 192 of the Lexmark 356 user manual — Replacing a black and color imaging kit
Page 192 · click to enlarge
Page 192

Maintaining the printer 192

Lexmark 356 — Replacing a black and color imaging kit diagram (page 192)
Fig. 116 · Replacing a black and color imaging kit

8 Unpack the replacement black and color imaging kit.

Leave the packaging on the developer units.

9 Gently shake the yellow, cyan, magenta, and black developer units side to side.

10 Remove the red shipping cover from the yellow, cyan, magenta, and black developer units.

Lexmark 356 — Replacing a black and color imaging kit diagram (page 192)
Fig. 117 · Replacing a black and color imaging kit

11 Insert the yellow, cyan, magenta, and black developer units.

Lexmark 356 — Replacing a black and color imaging kit diagram (page 192)
Fig. 118 · Replacing a black and color imaging kit

12 Place the used black and color imaging kit in the enclosed package.

Page 193 of the Lexmark 356 user manual — Replacing a black and color imaging kit
Page 193 · click to enlarge
Page 193

Maintaining the printer 193

13 Align and insert the imaging kit.

Lexmark 356 — Replacing a black and color imaging kit diagram (page 193)
Fig. 119 · Replacing a black and color imaging kit

14 Replace the waste toner bottle.

Lexmark 356 — Replacing a black and color imaging kit diagram (page 193)
Fig. 120 · Replacing a black and color imaging kit
Page 194 of the Lexmark 356 user manual — Replacing a black and color imaging kit
Page 194 · click to enlarge
Page 194

Maintaining the printer 194

15 Replace the right side cover.

Lexmark 356 — Replacing a black and color imaging kit diagram (page 194)
Fig. 121 · Replacing a black and color imaging kit

16 Replace the toner cartridges.

Lexmark 356 — Replacing a black and color imaging kit diagram (page 194)
Fig. 122 · Replacing a black and color imaging kit

17 Close the top door.

Lexmark 356 — Replacing a black and color imaging kit diagram (page 194)
Fig. 123 · Replacing a black and color imaging kit
Page 195 of the Lexmark 356 user manual — Replacing a toner cartridge
Page 195 · click to enlarge
Page 195

Maintaining the printer 195

18 Close the front door.

Lexmark 356 — Replacing a toner cartridge diagram (page 195)
Fig. 124 · Replacing a toner cartridge

Replacing a toner cartridge

Replace the specified toner cartridge (yellow, cyan, magenta, or black) when 88 Replace <color> Cartridge appears. The printer will not continue printing until the specified cartridge is replaced.

1 Make sure the printer is on and Ready or 88 Replace <color> Cartridge appears.

2 Unpack the new cartridge, and set it near the printer.

3 Open the top door.

Lexmark 356 — Replacing a toner cartridge diagram (page 195)
Fig. 125 · Replacing a toner cartridge
Page 196 of the Lexmark 356 user manual — Replacing a toner cartridge
Page 196 · click to enlarge
Page 196

Maintaining the printer 196

4 Remove the toner cartridge by lifting the handle, and then gently pulling away from the imaging kit.

Lexmark 356 — Replacing a toner cartridge diagram (page 196)
Fig. 126 · Replacing a toner cartridge

5 Align the new toner cartridge, and then press down until it is all the way into the slot.

Lexmark 356 — Replacing a toner cartridge diagram (page 196)
Fig. 127 · Replacing a toner cartridge
Page 197 of the Lexmark 356 user manual — Replacing a developer unit
Page 197 · click to enlarge
Page 197

Maintaining the printer 197

6 Close the top door.

Lexmark 356 — Replacing a developer unit diagram (page 197)
Fig. 128 · Replacing a developer unit

Replacing a developer unit

Replace a developer unit when a print quality defect occurs or when damage occurs to the printer.

1 Grasp the front door at the side handholds, and then pull it toward you to open it.

Lexmark 356 — Replacing a developer unit diagram (page 197)
Fig. 129 · Replacing a developer unit
Page 198 of the Lexmark 356 user manual — Replacing a developer unit
Page 198 · click to enlarge
Page 198

Maintaining the printer 198

2 Open the top door.

Lexmark 356 — Replacing a developer unit diagram (page 198)
Fig. 130 · Replacing a developer unit

3 Remove the toner cartridges by lifting the handles and then gently pulling away from the imaging kit.

Lexmark 356 — Replacing a developer unit diagram (page 198)
Fig. 131 · Replacing a developer unit

4 Remove the right side cover.

Lexmark 356 — Replacing a developer unit diagram (page 198)
Fig. 132 · Replacing a developer unit
Page 199 of the Lexmark 356 user manual — Replacing a developer unit
Page 199 · click to enlarge
Page 199

Maintaining the printer 199

5 Press the green levers on each side of the waste toner bottle, and then remove it.

Lexmark 356 — Replacing a developer unit diagram (page 199)
Fig. 133 · Replacing a developer unit

6 Lift the blue levers on the imaging kit, and then pull it toward you.

Lexmark 356 — Replacing a developer unit diagram (page 199)
Fig. 134 · Replacing a developer unit

7 Press down on the blue levers, grasp the handles on the sides, and then pull the imaging kit out.

Lexmark 356 — Replacing a developer unit diagram (page 199)
Fig. 135 · Replacing a developer unit
Page 200 of the Lexmark 356 user manual — Replacing a developer unit
Page 200 · click to enlarge
Page 200

Maintaining the printer 200

8 Remove the used developer unit.

Lexmark 356 — Replacing a developer unit diagram (page 200)
Fig. 136 · Replacing a developer unit

9 Place the used developer in the enclosed package.

10 Unpack the replacement developer unit.

Leave the packaging on the developer unit.

11 Gently shake the developer unit side to side.

12 Remove the red shipping cover from the developer unit.

Lexmark 356 — Replacing a developer unit diagram (page 200)
Fig. 137 · Replacing a developer unit

13 Insert the developer unit.

Lexmark 356 — Replacing a developer unit diagram (page 200)
Fig. 138 · Replacing a developer unit
Page 201 of the Lexmark 356 user manual — Replacing a developer unit
Page 201 · click to enlarge
Page 201

Maintaining the printer 201

14 Align and insert the imaging kit.

Lexmark 356 — Replacing a developer unit diagram (page 201)
Fig. 139 · Replacing a developer unit

15 Replace the waste toner bottle.

Lexmark 356 — Replacing a developer unit diagram (page 201)
Fig. 140 · Replacing a developer unit
Page 202 of the Lexmark 356 user manual — Replacing a developer unit
Page 202 · click to enlarge
Page 202

Maintaining the printer 202

16 Replace the right side cover.

Lexmark 356 — Replacing a developer unit diagram (page 202)
Fig. 141 · Replacing a developer unit

17 Replace the toner cartridges.

Lexmark 356 — Replacing a developer unit diagram (page 202)
Fig. 142 · Replacing a developer unit

18 Close the top door.

Lexmark 356 — Replacing a developer unit diagram (page 202)
Fig. 143 · Replacing a developer unit
Page 203 of the Lexmark 356 user manual — Cleaning the exterior of the printer
Page 203 · click to enlarge
Page 203

Maintaining the printer 203

19 Close the front door.

Lexmark 356 — Cleaning the exterior of the printer diagram (page 203)
Fig. 144 · Cleaning the exterior of the printer

Cleaning the exterior of the printer

1 Make sure that the printer is turned off and unplugged from the wall outlet.

2 Remove paper from the standard exit tray.

3 Dampen a clean, lint‑free cloth with water.

4 Wipe only the outside of the printer, making sure to include the standard exit tray.

5 Make sure the standard exit tray is dry before beginning a new print job.

Page 204 of the Lexmark 356 user manual — Before moving the printer
Page 204 · click to enlarge
Page 204

Maintaining the printer 204

Cleaning the scanner glass

Clean the scanner glass if you encounter print quality problems, such as streaks on copied or scanned images.

1 Slightly dampen a soft, lint-free cloth or paper towel with water.

2 Open the scanner cover.

Lexmark 356 — Cleaning the scanner glass diagram (page 204)
Fig. 145 · Cleaning the scanner glass

1 White underside ADF cover

2 White underside scanner glass cover

3 Wipe the scanner glass until it is clean and dry.

4 Wipe the white underside of the scanner cover until it is clean and dry.

5 Close the scanner cover.

Moving the printer

Before moving the printer

  • CAUTION—POTENTIAL INJURY: Before moving the printer, follow these guidelines to avoid personal injury or printer damage:
  • Turn the printer off using the power switch, and then unplug the power cord from the electrical outlet.
  • Disconnect all cords and cables from the printer before moving it.

3 Scanner glass · 4 ADF glass

Page 205 of the Lexmark 356 user manual — Shipping the printer
Page 205 · click to enlarge
Page 205

Maintaining the printer 205

  • Lift the printer off the optional tray, and then set it aside instead of trying to lift the tray and printer at the same time.

Moving the printer to another location

The printer and options can be safely moved to another location by following these precautions:

  • Any cart used to move the printer must have a surface able to support the full footprint of the printer. Any cart used to move the options must have a surface able to support the dimensions of the options.
  • Keep the printer in an upright position.
  • Avoid severe jarring movements.

Shipping the printer

When shipping the printer, use the original packaging or call the place of purchase for a relocation kit.

Page 206 of the Lexmark 356 user manual — Using the Embedded Web Server
Page 206 · click to enlarge
Page 206

Administrative support

Finding advanced networking and administrator information

This chapter covers basic administrative support tasks. For more advanced system support tasks, see the Networking Guide on the Software and Documentation CD and the Embedded Web Server Administrator's Guide on the Lexmark Web site at www.lexmark.com

Restoring the factory default settings

Menu settings marked with an asterisk (*) indicate the active settings. You can restore the original printer settings, often referred to as the factory default settings.

1 Make sure the printer is on and Ready appears.

2 From the printer control panel, press .

3 Press the arrow buttons until Settings appears, and then press .

4 Press the arrow buttons until General Settings appears, and then press .

5 Press the arrow buttons until Factory Defaults appears, and then press .

6 Press the arrow buttons until Restore Now appears, and then press .

Submitting changes appears briefly.

7 Press , and then press until Ready appears.

The following factory default settings are restored:

  • All downloaded resources in the printer memory are deleted. This includes fonts, macros, and symbol sets.
  • All settings return to the factory default settings except Printer Language in the Setup menu and custom settings in the Network and USB menus.

Using the Embedded Web Server

If the printer is installed on a network, the Embedded Web Server is available for a range of functions:

  • Configuring printer settings
  • Checking the status of the printer supplies
  • Configuring network settings
  • Viewing reports
  • Restoring the factory default settings
  • Viewing the virtual display
  • Setting Web page password protect
  • Setting Panel PIN protect
  • Setting the date and time

Administrative support 206

Page 207 of the Lexmark 356 user manual — Viewing reports
Page 207 · click to enlarge
Page 207

To access the Embedded Web Server:

1 Type the printer IP address into the address field of your Web browser.

If you do not know the IP address of the printer, you can:

  • View the IP address on the printer control panel in the TCP/IP section under the Networks/Ports menu.
  • Print a network setup page or the menu settings pages and locate the IP address in the TCP/IP section.

2 Click one of the tabs to access information about the printer, change settings, or view a report.

Setting up e ‑ mail alerts

You can have the printer send you an e‑mail when the supplies are getting low or when the paper needs to be changed, added, or unjammed.

To set up e‑mail alerts:

1 Type the printer IP address into the address field of your Web browser.

If you do not know the IP address of the printer, you can:

  • View the IP address on the printer control panel in the TCP/IP section under the Networks/Ports menu.
  • Print a network setup page or the menu settings pages and locate the IP address in the TCP/IP section.

2 Click Settings.

3 Under Other Settings, click E‑mail Alert Setup.

4 Select the items for notification and type in the e‑mail addresses that you want to receive e‑mail alerts.

5 Click Submit.

Viewing reports

You can view some reports from the Embedded Web Server. These reports are useful for assessing the status of the printer, the network, and supplies.

To view reports from a network printer:

1 Type the printer IP address into the address field of your Web browser.

If you do not know the IP address of the printer you can:

  • View the IP address on the printer control panel in the TCP/IP section under the Networks/Ports menu.
  • Print a network setup page or the menu settings pages and locate the IP address in the TCP/IP section.

2 Click Reports, and then click the type of report you want to view.

Administrative support 207

Page 208 of the Lexmark 356 user manual — Error message about reading USB drive appears
Page 208 · click to enlarge
Page 208

Troubleshooting

Solving basic printer problems

If there are basic printer problems, or the printer is unresponsive, make sure:

  • The power cord is plugged into the printer and a properly grounded electrical outlet.
  • The electrical outlet is not turned off by any switch or breaker.
  • The printer is not plugged into any surge protectors, uninterrupted power supplies, or extension cords.
  • Other electronic equipment plugged into the outlet is working.
  • The printer is turned on. Check the printer power switch.
  • The printer cable is securely attached to the printer and the host computer, print server, option, or other network device.
  • All options are properly installed.
  • The printer driver settings are correct.

Once you have checked each of these possibilities, turn the printer off, wait for about 10 seconds, and then turn the printer back on. This often fixes the problem.

Solving printing problems

Multiple ‑ language PDFs do not print

The documents contain unavailable fonts.

1 Open the document you want to print in Adobe Acrobat.

2 Click the printer icon.

The Print dialog appears.

3 Select Print as image.

4 Click OK.

Printer control panel display is blank or displays only diamonds

The printer self test failed. Turn the printer off, wait about 10 seconds, and then turn the printer back on.

If Performing Self Test and Ready do not appear, turn the printer off and contact Customer Support.

Error message about reading USB drive appears

Make sure the USB drive is supported. For information regarding tested and approved USB flash memory devices, visit the Lexmark Web site at www.lexmark.com.

Troubleshooting 208

Page 209 of the Lexmark 356 user manual — C HANGE THE P AGE P ROTECT SETTING TO O FF
Page 209 · click to enlarge
Page 209

Jobs do not print

These are possible solutions. Try one or more of the following:

M AKE SURE THE PRINTER IS READY TO PRINT

Make sure Ready or Power Saver appears on the display before sending a job to print. Press to return the printer to the Ready state.

C HECK TO SEE IF THE STANDARD EXIT BIN IS FULL

Remove the stack of paper from the standard exit bin, and then press .

C HECK TO SEE IF THE PAPER TRAY IS EMPTY

Load paper in the tray.

M AKE SURE THE PRINTER IS CONNECTED TO THE NETWORK

Print a network setup page and check that the status shows Connected. If the status is Not Connected, check the network cables, and then try printing the network setup page again. Contact your system support person to make sure the network is functioning correctly.

Copies of the printer software are also available on the Lexmark Web site at www.lexmark.com.

MAKE SURE YOU ARE USING A RECOMMENDED USB OR ETHERNET CABLE

For more information, visit the Lexmark Web site at www.lexmark.com.

M AKE SURE PRINTER CABLES ARE SECURELY CONNECTED

Check the cable connections to the printer and print server to make sure they are secure.

For more information, see the setup documentation that came with the printer.

Job takes longer than expected to print

These are possible solutions. Try one or more of the following:

R EDUCE THE COMPLEXITY OF THE PRINT JOB

Eliminate the number and size of fonts, the number and complexity of images, and the number of pages in the job.

C HANGE THE P AGE P ROTECT SETTING TO O FF

1 From the printer control panel, press .

2 Press the arrow buttons until Settings appears, and then press .

3 Press the arrow buttons until Setup Menu appears, and then press .

4 Press the arrow buttons until Print Recovery appears, and then press .

Troubleshooting 209

Page 210 of the Lexmark 356 user manual — R EDUCE THE COMPLEXITY OF THE PRINT JOB
Page 210 · click to enlarge
Page 210

5 Press the arrow buttons until Page Protect appears, and then press .

6 Press the arrow buttons until Off appears, and then press .

Job prints from the wrong tray or on the wrong paper

C HECK THE P APER T YPE SETTING

Make sure the Paper Type setting matches the paper loaded in the tray.

Incorrect or strange characters print

  • The print job may not have terminated properly. Turn the printer off and back on.
  • Make sure the printer is not in Hex Trace mode. If Ready Hex appears on the display, you must exit Hex Trace mode before you can print your job. Turn the printer off and back on to exit Hex Trace mode.

Tray linking does not work

These are possible solutions. Try one or more of the following:

L OAD THE SAME SIZE AND TYPE OF PAPER

  • Load the same size and type of paper in each tray to be linked.
  • Move the paper guides to the correct positions for the paper size loaded in each tray.

USE THE SAME PAPER SIZE AND PAPER TYPE SETTINGS

  • Print a menu settings page and compare the settings for each tray.
  • If necessary, adjust the settings from the Paper Size/Type menu.

Large jobs do not collate

These are possible solutions. Try one or more of the following:

M AKE SURE C OLLATE IS SET TO O N

From the printer control panel Finishing menu, Print Properties, or the Print dialog, set Collate to On.

R EDUCE THE COMPLEXITY OF THE PRINT JOB

Reduce the complexity of the print job by eliminating the number and size of fonts, the number and complexity of images, and the number of pages in the job.

Troubleshooting 210

Page 211 of the Lexmark 356 user manual — Scanner unit does not close
Page 211 · click to enlarge
Page 211

M AKE SURE THE PRINTER HAS ENOUGH MEMORY

Add printer memory.

Unexpected page breaks occur

Increase the Print Timeout value:

1 From the printer control panel, press .

2 Press the arrow buttons until Settings appears, and then press .

3 Press the arrow buttons until General Settings appears, and then press .

4 Press the arrow buttons until Timeouts appears, and then press .

5 Press the arrow buttons until Print Timeout appears, and then press .

6 Press the arrow buttons until the desired value appears, and then press .

Solving copy problems

Copier does not respond

These are possible solutions. Try one or more of the following:

C HECK THE DISPLAY FOR ERROR MESSAGES

Clear any error messages.

C HECK THE POWER

Make sure the printer is plugged in, the power is on, and Ready appears.

Scanner unit does not close

Make sure there are no obstructions:

1 Open the scanner cover.

2 Remove any obstruction keeping the scanner unit open.

3 Close the scanner cover.

Troubleshooting 211

Page 212 of the Lexmark 356 user manual — C HECK THE QUALITY OF THE ORIGINAL DOCUMENT
Page 212 · click to enlarge
Page 212
Lexmark 356 — Poor copy quality diagram (page 212)
Fig. 146 · Poor copy quality

Poor copy quality

These are some examples of poor copy quality:

  • Blank pages
  • Checkerboard pattern
  • Distorted graphics or pictures
  • Missing characters
  • Faded print
  • Dark print
  • Skewed lines
  • Smudges
  • Streaks
  • Unexpected characters
  • White lines in print

These are possible solutions. Try one or more of the following:

C HECK THE DISPLAY FOR ERROR MESSAGES

Clear any error messages.

T HE TONER MAY BE LOW

When 88 Cartridge low appears or when the print becomes faded, replace the toner cartridge.

T HE SCANNER GLASS MAY BE DIRTY

Clean the scanner glass with a clean, lint‑free cloth dampened with water.

T HE COPY IS TOO LIGHT OR TOO DARK

Adjust the copy darkness setting.

C HECK THE QUALITY OF THE ORIGINAL DOCUMENT

Make sure the quality of the original document is satisfactory.

Troubleshooting 212

Page 213 of the Lexmark 356 user manual — Checking an unresponsive scanner
Page 213 · click to enlarge
Page 213

C HECK THE DOCUMENT PLACEMENT

Make sure the document or photo is loaded facedown on the scanner glass in the upper left corner.

U NWANTED TONER IS IN THE BACKGROUND

  • Adjust the darkness to a lighter setting.
  • Change the Background Removal setting in the Copy Settings menu.

P ATTERNS ( MOIRÉ ) APPEAR IN THE OUTPUT

  • From the printer control panel, press the Content button until the light comes on next to Text/Photo or Photo.
  • Rotate the original document on the scanner glass.
  • From the printer control panel, press the Scale button and adjust the setting.

T EXT IS LIGHT OR DISAPPEARING

From the printer control panel, press the Content button until the light comes on next to Text or Text/Photo.

T HE OUTPUT APPEARS WASHED OUT OR OVEREXPOSED

  • From the printer control panel, press the Content button until the light comes on next to Text/Photo or Photo.
  • From the printer control panel, press the Darkness button and change to a darker setting.

Partial document or photo copies

These are possible solutions. Try one or more of the following:

C HECK THE DOCUMENT PLACEMENT

Make sure the document or photo is loaded facedown on the scanner glass in the upper left corner.

C HECK THE P APER S IZE SETTING

Make sure the Paper Size setting matches the paper loaded in the tray.

Solving scanner problems

Checking an unresponsive scanner

If your scanner is not responding, then make sure:

  • The printer is turned on.
  • The printer cable is securely attached to the printer and the host computer, print server, option, or other network device.
  • The power cord is plugged into the printer and a properly grounded electrical outlet.
  • The electrical outlet is not turned off by any switch or breaker.

Troubleshooting 213

Page 214 of the Lexmark 356 user manual — C HECK THE QUALITY OF THE ORIGINAL DOCUMENT
Page 214 · click to enlarge
Page 214
  • The printer is not plugged into any surge protectors, uninterrupted power supplies, or extension cords.
  • Other electrical equipment plugged into the outlet is working.

Once you have checked each of these possibilities, turn the printer off and then back on. This often fixes the problem with the scanner.

Scan was not successful

These are possible solutions. Try one or more of the following:

C HECK THE CABLE CONNECTIONS

Make sure the network or USB cable is securely connected to the computer and the printer.

A N ERROR MAY HAVE OCCURRED IN THE PROGRAM

Turn off and then restart the computer.

Scanning takes too long or freezes the computer

These are possible solutions. Try one or more of the following:

O THER SOFTWARE PROGRAMS MAY BE INTERFERING WITH SCANNING

Close all programs not being used.

T HE SCAN RESOLUTION MAY BE SET TOO HIGH

Select a lower scan resolution.

Poor scanned image quality

These are possible solutions. Try one or more of the following:

C HECK THE DISPLAY FOR ERROR MESSAGES

Clear any error messages.

T HE SCANNER GLASS MAY BE DIRTY

Clean the scanner glass with a clean, lint‑free cloth dampened with water. For more information, see “Cleaning the scanner glass” on page 204.

A DJUST THE SCAN RESOLUTION

Increase the resolution of the scan for a higher quality output.

C HECK THE QUALITY OF THE ORIGINAL DOCUMENT

Make sure the quality of the original document is satisfactory.

Troubleshooting 214

Page 215 of the Lexmark 356 user manual — Caller ID is not shown
Page 215 · click to enlarge
Page 215

C HECK THE DOCUMENT PLACEMENT

Make sure the document or photo is loaded facedown on the scanner glass in the upper left corner.

Partial document or photo scans

These are possible solutions. Try one or more of the following:

C HECK THE DOCUMENT PLACEMENT

Make sure the document or photo is loaded facedown on the scanner glass in the upper left corner.

C HECK THE PAPER SIZE SETTING

Make sure the paper size setting matches the paper loaded in the tray:

1 From the printer control panel, check the Paper Size setting from the Paper menu.

  • 2 Before sending the job to print, specify the correct size setting:
  • For Windows users, specify the size from Print Properties.
  • For Macintosh users, specify the size from the Page Setup dialog.

Cannot scan from a computer

These are possible solutions. Try one or more of the following:

C HECK THE DISPLAY FOR ERROR MESSAGES

Clear any error messages.

C HECK THE POWER

Make sure the printer is plugged in, the power is on, and Ready appears.

C HECK THE CABLE CONNECTIONS

Make sure the network or USB cable is securely connected to the computer and the printer.

Solving fax problems

Caller ID is not shown

Contact your telecommunications company to verify that your telephone line is subscribed to the caller ID service.

If your region supports multiple caller ID patterns, you may have to change the default setting. There are two settings available: FSK (pattern 1) and DTMF (pattern 2). The availability of these settings by way of the Fax menu depends on whether your country or region supports multiple caller ID patterns. Contact your telecommunications company to determine which pattern or switch setting to use.

Troubleshooting 215

Page 216 of the Lexmark 356 user manual — C HECK FOR A DIAL TONE
Page 216 · click to enlarge
Page 216

Cannot send or receive a fax

These are possible solutions. Try one or more of the following:

C HECK THE DISPLAY FOR ERROR MESSAGES

Clear any error messages.

C HECK THE POWER

Make sure the printer is plugged in, the power is on, and Ready appears.

C HECK THE PRINTER CONNECTIONS

Make sure the cable connections for the following hardware are secure, if applicable:

  • Telephone
  • Handset
  • Answering machine

C HECK THE TELEPHONE WALL JACK

1 Plug a telephone into the wall jack.

2 Listen for a dial tone.

3 If you do not hear a dial tone, then plug a different telephone into the wall jack.

4 If you still do not hear a dial tone, then plug a telephone into a different wall jack.

5 If you hear a dial tone, then connect the printer to that wall jack.

R EVIEW THIS DIGITAL PHONE SERVICE CHECKLIST

The fax modem is an analog device. Certain devices can be connected to the printer so that digital telephone services can be used.

  • If you are using an ISDN telephone service, then connect the printer to an analog telephone port (an R-interface port) on an ISDN terminal adapter. For more information and to request an R-interface port, contact your ISDN provider.
  • If you are using DSL, then connect to a DSL filter or router that will support analog use. For more information, contact your DSL provider.
  • If you are using a PBX telephone service, then make sure you are connecting to an analog connection on the PBX. If none exists, consider installing an analog telephone line for the fax machine.

C HECK FOR A DIAL TONE

  • Place a test call to the telephone number to which you want to send a fax to make sure that it is working correctly.
  • If the telephone line is being used by another device, then wait until the other device is finished before sending a fax.
  • If you are using the On Hook Dial feature, then turn up the volume to verify a dial tone.

Troubleshooting 216

Page 217 of the Lexmark 356 user manual — C HECK THE RING COUNT DELAY SETTINGS
Page 217 · click to enlarge
Page 217

T EMPORARILY DISCONNECT OTHER EQUIPMENT

To ensure the printer is working correctly, connect it directly to the telephone line. Disconnect any answering machines, computers with modems, or telephone line splitters.

C HECK FOR JAMS

Clear any jams, and then make sure that Ready appears.

T EMPORARILY DISABLE C ALL W AITING

Call Waiting can disrupt fax transmissions. Disable this feature before sending or receiving a fax. Call your telephone company to obtain the keypad sequence for temporarily disabling Call Waiting.

V OICE M AIL SERVICE MAY BE INTERFERING WITH THE FAX TRANSMISSION

Voice Mail offered through your local telephone company may disrupt fax transmissions. To enable both Voice Mail and the printer to answer calls, you may want to consider adding a second telephone line for the printer.

T HE PRINTER MEMORY MAY BE FULL

1 Dial the fax number.

2 Scan the original document one page at a time.

Can send but not receive faxes

These are possible solutions. Try one or more of the following:

C HECK TO SEE IF THE PAPER TRAY IS EMPTY

Load paper in the tray.

C HECK THE RING COUNT DELAY SETTINGS

The ring count delay sets the number of times the phone line rings before the printer answers. If you have extension phones on the same line as the printer, or subscribe to the telephone company's Distinctive Ring service, then keep the Ring Delay setting at 4.

1 Type the printer IP address into the address field of your Web browser.

2 Click Settings.

3 Click Fax Settings.

4 Click Analog Fax Setup.

5 In the Rings to Answer box, enter the number of times you want the phone to ring before answering.

6 Click Submit.

Troubleshooting 217

Page 218 of the Lexmark 356 user manual — M AKE SURE THE FAX TRANSMISSION SPEED IS NOT SET TOO HIGH
Page 218 · click to enlarge
Page 218

T HE TONER MAY BE LOW

88 <color> toner low appears when the toner is low.

Can receive but not send faxes

These are possible solutions. Try one or more of the following:

M AKE SURE THE PRINTER IS IN F AX MODE

From the printer control panel, press the Fax button to put the printer in Fax mode.

M AKE SURE THE DOCUMENT IS LOADED PROPERLY

Load the original document faceup, short edge first into the ADF or facedown on the scanner glass in the upper left corner.

M AKE SURE THE SHORTCUT NUMBER IS SET UP PROPERLY

  • Check to make sure the shortcut number has been programmed for the number that you want to dial.
  • As an alternative, dial the telephone number manually.

Received fax has poor print quality

These are possible solutions. Try one or more of the following:

R E ‑ SEND THE DOCUMENT

Ask the person who sent you the fax to:

  • Check that the quality of the original document is satisfactory.
  • Resend the fax. There may have been a problem with the quality of the telephone line connection.
  • Increase the fax scan resolution, if possible.

T HE TONER MAY BE LOW

When 88 <color> toner low appears or when you experience faded print, replace the cartridge(s).

M AKE SURE THE FAX TRANSMISSION SPEED IS NOT SET TOO HIGH

Decrease the incoming fax transmission speed:

1 Type the printer IP address into the address field of your Web browser.

2 Click Configuration.

3 Click Fax Settings.

Troubleshooting 218

Page 219 of the Lexmark 356 user manual — M AKE SURE THE OPTION IS INSTALLED CORRECTLY
Page 219 · click to enlarge
Page 219

4 Click Analog Fax Setup.

5 In the Max Speed box, click on one of the following: 2400 4800 9600 14400 33600

6 Click Submit.

Blocking junk faxes

1 Type the printer IP address into the address field of your Web browser.

2 Click Configuration.

3 Click Fax Settings.

4 Click Analog Fax Setup.

5 Click the No Name Fax option.

This option blocks all incoming faxes that have a private caller ID or no fax station name.

6 In the Banned Fax List field, enter the phone numbers or fax station names of specific fax callers you want to block.

Solving option problems

Option does not operate correctly or quits after it is installed

These are possible solutions. Try one or more of the following:

R ESET THE PRINTER

Turn the printer off, wait about 10 seconds, and then turn the printer on.

C HECK TO SEE IF THE OPTION IS CONNECTED TO THE PRINTER

1 Turn the printer off.

2 Unplug the printer.

3 Check the connection between the option and the printer.

M AKE SURE THE OPTION IS INSTALLED CORRECTLY

Print a menu settings page and check to see if the option is listed in the Installed Options list. If the option is not listed, then reinstall it. For more information, see the hardware setup documentation that came with the option, or go to www.lexmark.com/publications to view the option instruction sheet.

Troubleshooting 219

Page 220 of the Lexmark 356 user manual — C HECK THE PAPER GUIDES
Page 220 · click to enlarge
Page 220

M AKE SURE THE OPTION IS SELECTED

From the computer you are printing from, select the option. For more information, see “Updating available options in the printer driver” on page 33.

Drawers

M AKE SURE THE PAPER IS LOADED CORRECTLY

1 Open the paper tray.

2 Check for paper jams or misfeeds.

3 Make sure paper guides are aligned against the edges of the paper.

4 Make sure the paper tray closes properly.

5 Close the door.

R ESET THE PRINTER

Turn the printer off. Wait 10 seconds. Turn the printer back on.

Multipurpose feeder

C HECK THE MULTIPURPOSE FEEDER

Make sure the 650‑sheet duo drawer (multipurpose feeder) is installed properly.

C LEAR ANY JAMS

Clear any jams in the multipurpose feeder.

C HECK THE POWER CORD CONNECTION

Make sure:

  • The power cord is plugged into the printer and a properly grounded electrical outlet.
  • The outlet has power.

C HECK THE PAPER

Use recommended paper and specialty media. For more information, see the chapter about paper and specialty media guidelines.

C HECK THE PAPER GUIDES

Move the guides in the tray to the correct position for the size loaded.

Troubleshooting 220

Page 221 of the Lexmark 356 user manual — Page that jammed does not reprint after you clear the jam
Page 221 · click to enlarge
Page 221

C HECK FOR SERVICE MESSAGES

If a service message appears, turn the printer off, wait about 10 seconds, and then turn the printer back on. If the error recurs, call for service.

Memory card

Make sure the memory card is securely connected to the printer system board.

Solving paper feed problems

Paper frequently jams

These are possible solutions. Try one or more of the following:

C HECK THE PAPER

Use recommended paper and specialty media. For more information, see the chapter about paper and specialty media guidelines.

MAKE SURE THERE IS NOT TOO MUCH PAPER IN THE PAPER TRAY

Make sure the stack of paper you load does not exceed the maximum stack height indicated in the tray or on the multipurpose feeder.

C HECK THE PAPER GUIDES

Move the guides in the tray to the correct positions for the paper size loaded.

T HE PAPER MAY HAVE ABSORBED MOISTURE DUE TO HIGH HUMIDITY

  • Load paper from a fresh package.
  • Store paper in its original wrapper until you use it.

Paper jam message remains after jam is cleared

The paper path is not clear. Clear jammed paper from the entire paper path, and then press .

Page that jammed does not reprint after you clear the jam

In the Setup menu, Jam Recovery is set to Off. Set Jam Recovery to Auto or On:

1 Press .

2 Press the arrow buttons until Settings appears, and then press .

3 Press the arrow buttons until General settings appears, and then press .

4 Press the arrow buttons until Print Recovery appears, and then press .

Troubleshooting 221

Page 222 of the Lexmark 356 user manual — Characters have jagged or uneven edges
Page 222 · click to enlarge
Page 222

5 Press the arrow buttons until Jam Recovery appears, and then press .

6 Press the arrow buttons until On or Auto appears, and then press .

Solving print quality problems

The information in the following topics may help you solve print quality problems. If these suggestions still do not correct the problem, contact Customer Support. You may have a printer part that requires adjustment or replacement.

Blank pages

These are possible solutions. Try one or more of the following:

P ACKING MATERIAL MAY BE ON THE PRINT CARTRIDGE

Remove the print cartridge and make sure the packing material is properly removed. Reinstall the print cartridge.

T HE TONER MAY BE LOW

When 88 Cartridge low appears, order a new print cartridge.

If the problem continues, the printer may need to be serviced. For more information, contact Customer Support.

Characters have jagged or uneven edges

If you are using downloaded fonts, verify that the fonts are supported by the printer, the host computer, and the software program.

Troubleshooting 222

Page 223 of the Lexmark 356 user manual — Gray background
Page 223 · click to enlarge
Page 223

Clipped images

These are possible solutions. Try one or more of the following:

C HECK THE GUIDES

Move the width and length guides in the tray to the correct positions for the paper size loaded.

C HECK THE PAPER SIZE SETTING

Make sure the paper size setting matches the paper loaded in the tray:

1 From the printer control panel, check the Paper Size setting from the Paper menu.

  • 2 Before sending the job to print, specify the correct size setting:
  • For Windows users, specify the size from Print Properties.
  • For Macintosh users, specify the size from the Page Setup dialog.

Dark lines

ABCDE

ABCDE ABCDE

The imaging kit may be defective.

If Black and color imaging kit life warning orBlack imaging kit life warning appears, replace the imaging kit.

Gray background

ABCDE

ABCDE ABCDE

C HECK THE T ONER D ARKNESS SETTING

Select a lighter Toner Darkness setting:

  • From the printer control panel, change the setting from the Quality menu.
  • For Windows users, change the setting from Print Properties.
  • For Macintosh users, change the setting from the Print dialog.

Troubleshooting 223

Page 224 of the Lexmark 356 user manual — T HE IMAGING KIT MAY BE DEFECTIVE
Page 224 · click to enlarge
Page 224

Incorrect margins

ABCD ABCD ABCD

These are possible solutions. Try one or more of the following:

C HECK THE PAPER GUIDES

Move the guides in the tray to the correct positions for the paper size loaded.

C HECK THE PAPER SIZE SETTING

Make sure the paper size setting matches the paper loaded in the tray:

1 From the printer control panel, check the Paper Size setting from the Paper menu.

  • 2 Before sending the job to print, specify the correct size setting:
  • For Windows users, specify the size from Print Properties.
  • For Macintosh users, specify the size from the Page Setup dialog.

Light colored line, white line, or incorrectly colored line

These are possible solutions. Try one or more of the following:

A TONER CARTRIDGE MAY BE DEFECTIVE

Replace the defective toner cartridge.

T HE IMAGING KIT MAY BE DEFECTIVE

Replace the imaging kit.

Troubleshooting 224

Page 225 of the Lexmark 356 user manual — T HE FUSER MAY BE WORN OR DEFECTIVE
Page 225 · click to enlarge
Page 225

Paper curl

These are possible solutions. Try one or more of the following:

C HECK THE P APER T YPE SETTING

Make sure the Paper Type setting matches the paper loaded in the tray.

H AS THE PAPER ABSORBED MOISTURE DUE TO HIGH HUMIDITY ?

  • Load paper from a fresh package.
  • Store paper in its original wrapper until you use it.

Print irregularities

These are possible solutions. Try one or more of the following:

T HE PAPER MAY HAVE ABSORBED MOISTURE DUE TO HIGH HUMIDITY

  • Load paper from a fresh package.
  • Store paper in its original wrapper until you use it.

C HECK THE PAPER TYPE SETTING

Make sure the paper type setting matches the paper loaded in the tray:

1 From the printer control panel, check the Paper Type setting from the Paper menu.

  • 2 Before sending the job to print, specify the correct type setting:
  • For Windows users, specify the type from Print Properties.
  • For Macintosh users, specify the type from the Print dialog.

C HECK THE PAPER

Avoid textured paper with rough finishes.

T HE TONER MAY BE LOW

When 88 Cartridge low appears or when the print becomes faded, replace the print cartridge.

T HE FUSER MAY BE WORN OR DEFECTIVE

Replace the fuser.

Troubleshooting 225

Page 226 of the Lexmark 356 user manual — C ALIBRATE THE COLOR
Page 226 · click to enlarge
Page 226

Repeating defects

R EPEATING MARKS OCCUR MULTIPLE TIMES ON A PAGE

Print the Print defects guide and match the defects to the marks on one of the vertical lines. Follow the instructions on the Print defects guide to determine the cause of the repeating defects.

Skewed print

C HECK THE PAPER GUIDES

Move the guides in the tray to the correct positions for the paper size loaded.

C HECK THE PAPER

Make sure you are using paper that meets the printer specifications.

Print is too light

These are possible solutions. Try one or more of the following:

C ALIBRATE THE COLOR

The printer automatically calibrates the colors whenever a new imaging kit is detected. If a cartridge is replaced, then you can calibrate the colors manually:

1 From the printer control panel, press .

2 From the Admin menu, press the arrow buttons until Settings appears, and then press .

3 Press the arrow buttons until Print menu appears, and then press .

Show 5 more labels / short text on this page
Troubleshooting 226 · ) · ) · ) · )
Page 227 of the Lexmark 356 user manual — T HE IMAGING KIT MAY BE WORN OR DEFECTIVE
Page 227 · click to enlarge
Page 227

4 Press the arrow buttons until Quality menu appears, and then press .

5 Press the arrow buttons until Color Adjust appears, and then press .

Calibrating appears.

C HECK THE DARKNESS , BRIGHTNESS , AND CONTRAST SETTINGS

The Toner Darkness setting is too light, the RGB Brightness setting is too light, or the RGB Contrast setting is too low.

1 From the printer control panel, press .

2 From the Admin menu, press the arrow buttons until Settings appears, and then press .

3 Press the arrow buttons until Print menu appears, and then press .

4 Press the arrow buttons until Quality menu appears, and then press .

5 Press the arrow buttons until Toner Darkness, RGB Brightness, or RGB Contrast appears, and then press .

6 Change the selected setting to a lower value, and then press .

T HE PAPER MAY HAVE ABSORBED MOISTURE DUE TO HIGH HUMIDITY

  • Load paper from a fresh package.
  • Store paper in its original wrapper until you use it.

C HECK THE PAPER

Avoid textured paper with rough finishes.

C HECK THE P APER T YPE SETTING

Make sure the Paper Type setting matches the paper loaded in the tray.

M AKE SURE C OLOR S AVER IS SET TO O FF

Color Saver may be set to On.

A TONER CARTRIDGE MAY BE LOW

When 88 <color> Cartridge Low appears, order a new cartridge.

A TONER CARTRIDGE MAY BE DEFECTIVE

Replace the toner cartridge.

T HE IMAGING KIT MAY BE WORN OR DEFECTIVE

Replace the imaging kit.

Troubleshooting 227

Page 228 of the Lexmark 356 user manual — A TONER CARTRIDGE MAY BE DEFECTIVE
Page 228 · click to enlarge
Page 228

Print is too dark

These are possible solutions. Try one or more of the following:

C ALIBRATE THE COLOR

The printer automatically calibrates the colors whenever a new imaging kit is detected. If a cartridge is replaced, then you can calibrate the colors manually:

1 From the printer control panel, press .

2 From the Admin menu, press the arrow buttons until Settings appears, and then press .

3 Press the arrow buttons until Print menu appears, and then press .

4 Press the arrow buttons until Quality menu appears, and then press .

5 Press the arrow buttons until Color Adjust appears, and then press .

Calibrating appears.

C HECK THE DARKNESS , BRIGHTNESS , AND CONTRAST SETTINGS

The Toner Darkness setting is too dark, the RGB Brightness setting is too dark, or the RGB Contrast setting is too high.

1 From the printer control panel, press .

2 From the Admin menu, press the arrow buttons until Settings appears, and then press .

3 Press the arrow buttons until Print menu appears, and then press .

4 Press the arrow buttons until Quality menu appears, and then press .

5 Press the arrow buttons until Toner Darkness, RGB Brightness, or RGB Contrast appears, and then press .

6 Change the selected setting to a lower value, and then press .

A TONER CARTRIDGE MAY BE DEFECTIVE

Replace the toner cartridge.

Troubleshooting 228

Page 229 of the Lexmark 356 user manual — I S THERE TONER IN THE PAPER PATH ?
Page 229 · click to enlarge
Page 229

Solid color pages

These are possible solutions. Try one or more of the following:

M AKE SURE THE PRINT CARTRIDGE IS PROPERLY INSTALLED

Remove the print cartridge and shake it from side to side to redistribute the toner, and then reinstall it.

T HE PRINT CARTRIDGE MAY BE DEFECTIVE OR LOW ON TONER

Replace the used print cartridge with a new one. If the problem continues, the printer may need to be serviced. For more information, contact Customer Support.

Toner fog or background shading appears on the page

These are possible solutions. Try one or more of the following:

T HE IMAGING KIT MAY BE WORN OR DEFECTIVE

Replace the imaging kit.

I S THERE TONER IN THE PAPER PATH ?

Contact Customer Support.

Troubleshooting 229

Page 230 of the Lexmark 356 user manual — T HERE IS TONER IN THE PAPER PATH
Page 230 · click to enlarge
Page 230

Toner rubs off

These are possible solutions. Try one or more of the following:

C HECK THE PAPER TYPE SETTING

Make sure the paper type setting matches the paper loaded in the tray:

1 From the printer control panel, check the Paper Type setting from the Paper menu.

  • 2 Before sending the job to print, specify the correct type setting:
  • For Windows users, specify the type from Print Properties.
  • For Macintosh users, specify the type from the Print dialog.

C HECK THE P APER T EXTURE SETTING

From the printer control panel Paper menu, make sure the Paper Texture setting matches the paper loaded in the tray.

Toner specks

These are possible solutions. Try one or more of the following:

T HE PRINT CARTRIDGE MAY BE DEFECTIVE

Replace the print cartridge.

T HERE IS TONER IN THE PAPER PATH

Contact Customer Support.

Troubleshooting 230

Page 231 of the Lexmark 356 user manual — Uneven print density
Page 231 · click to enlarge
Page 231

Transparency print quality is poor

Try one or more of the following:

C HECK THE TRANSPARENCIES

Use only transparencies recommended by the printer manufacturer.

C HECK THE PAPER TYPE SETTING

Make sure the paper type setting matches the paper loaded in the tray:

1 From the printer control panel, check the Paper Type setting from the Paper menu.

  • 2 Before sending the job to print, specify the correct type setting:
  • For Windows users, specify the type from Print Properties.
  • For Macintosh users, specify the type from the Print dialog.

Uneven print density

ABCDE ABCDE ABCDE

Replace the black and color imaging kit.

Troubleshooting 231

Page 232 of the Lexmark 356 user manual — FAQ about color printing
Page 232 · click to enlarge
Page 232

Solving color quality problems

This section helps answer some basic color‑related questions and describes how some of the features provided in the Quality menu can be used to solve typical color problems.

Color misregistration

ABCDE ABCDE ABCDE ABCDE

Color has shifted outside of the appropriate area or has been superimposed over another color area. These are possible solutions. Try one or more of the following:

A TONER CARTRIDGE MAY BE DEFECTIVE

Remove and reinstall the toner cartridges.

C ALIBRATE THE COLOR

The printer will automatically calibrate the colors whenever a new imaging kit is detected. If a toner cartridge is replaced, a manual alignment will need to be performed.

1 From the printer control panel, press .

2 From the Admin menu, press the arrow buttons until Settings appears, and then press .

3 Press the arrow buttons until Print menu appears, and then press .

4 Press the arrow buttons until Quality menu appears, and then press .

5 Press the arrow buttons until Color Adjust appears, and then press .

Calibrating appears.

FAQ about color printing

What is RGB color?

Red, green, and blue light can be added together in various amounts to produce a large range of colors observed in nature. For example, red and green can be combined to create yellow. Televisions and computer monitors create colors in this manner. RGB color is a method of describing colors by indicating the amount of red, green, or blue needed to produce a certain color.

What is CMYK color?

Cyan, magenta, yellow, and black inks or toners can be printed in various amounts to produce a large range of colors observed in nature. For example, cyan and yellow can be combined to create green. Printing presses, inkjet printers, and color laser printers create colors in this manner. CMYK color is a method of describing colors by indicating the amount of cyan, magenta, yellow, and black needed to reproduce a particular color.

Troubleshooting 232

Page 233 of the Lexmark 356 user manual — Solving color quality problems
Page 233 · click to enlarge
Page 233

How is color specified in a document to be printed?

Software programs typically specify document color using RGB or CMYK color combinations. Additionally, they allow users to modify the color of each object in a document. For more information, see the software program Help topics.

How does the printer know what color to print?

When a user prints a document, information describing the type and color of each object is sent to the printer. The color information is passed through color conversion tables that translate the color into the appropriate amounts of cyan, magenta, yellow, and black toner needed to produce the desired color. The object information determines the application of color conversion tables. For example, it is possible to apply one type of color conversion table to text while applying a different color conversion table to photographic images.

Should I use PostScript or PCL emulation printer software? What settings should I use for the best color?

The PostScript driver is strongly recommended for best color quality. The default settings in the PostScript driver provide the preferred color quality for the majority of printouts.

Why doesn't the printed color match the color I see on the computer screen?

The color conversion tables used in Auto Color Correction mode generally approximate the colors of a standard computer monitor. However, because of technology differences that exist between printers and monitors, there are many colors that can also be affected by monitor variations and lighting conditions. For recommendations on how the printer color sample pages may be useful in solving certain color‑matching problems, see the question, “How can I match a particular color (such as a corporate logo)?”

The printed page appears tinted. Can I adjust the color?

Sometimes a printed page may appear tinted (for example, everything printed seems to be too red). This can be caused by environmental conditions, paper type, lighting conditions, or user preference. In these instances, adjust the Color Balance setting to create a more preferable color. Color Balance provides the user with the ability to make subtle adjustments to the amount of toner being used in each color plane. Selecting positive or negative values for cyan, magenta, yellow, and black (from the Color Balance menu) will slightly increase or decrease the amount of toner used for the chosen color. For example, if a printed page has a red tint, then decreasing both magenta and yellow could potentially improve the color balance.

My color transparencies seem dark when they are projected. Is there anything I can do to improve the color?

This problem most commonly occurs when projecting transparencies with reflective overhead projectors. To obtain the highest projected color quality, transmissive overhead projectors are recommended. If a reflective projector must be used, then adjusting the Toner Darkness setting to 1, 2, or 3 will lighten the transparency. Make sure to print on the recommended type of color transparencies.

What is manual color correction?

When manual color correction is enabled, the printer employs user‑selected color conversion tables to process objects. However, Color Correction must be set to Manual, or no user‑defined color conversion will be implemented. Manual color correction settings are specific to the type of object being printed (text, graphics, or images), and how the color of the object is specified in the software program (RGB or CMYK combinations).

  • Manual color correction is not useful if the software program does not specify colors with RGB or CMYK combinations. It is also not effective in situations in which the software program or the computer operating system controls the adjustment of colors.
  • The color conversion tables—applied to each object when Color Correction is set to Auto—generate preferred colors for the majority of documents.

Troubleshooting 233

Page 234 of the Lexmark 356 user manual — Manual Color menu
Page 234 · click to enlarge
Page 234

To manually apply a different color conversion table:

1 From the Quality menu, select Color Correction, and then select Manual.

2 From the Quality menu, select Manual Color, and then select the appropriate color conversion table for the affected object type.

Manual Color menu

Object type Color conversion tables

  • Vivid —Produces brighter, more saturated colors and may be applied to all incoming color formats.
  • sRGB Display —Produces an output that approximates the colors displayed on a computer monitor. Black toner usage is optimized for printing photographs.
  • Display—True Black —Produces an output that approximates the colors displayed on a computer monitor. Uses only black toner to create all levels of neutral gray.
  • sRGB Vivid —Provides an increased color saturation for the sRGB Display color correction. Black usage is optimized for printing business graphics.
  • Off —No color correction is implemented.
  • US CMYK —Applies color correction to approximate the SWOP (Specifications for Web Offset Publishing) color output.
  • Euro CMYK —Applies color correction to approximated EuroScale color output.
  • Vivid CMYK —Increases the color saturation of the US CMYK color correction setting.
  • Off —No color correction is implemented.

How can I match a particular color (such as a corporate logo)?

From the printer Quality menu, nine types of Color Samples sets are available. These are also available from the Color Samples page of the Embedded Web Server. Selecting any sample set generates a multiple‑page printout consisting of hundreds of colored boxes. Either a CMYK or RGB combination is located on each box, depending on the table selected. The observed color of each box is obtained by passing the CMYK or RGB combination labeled on the box through the selected color conversion table.

By examining Color Samples sets, a user can identify the box whose color is the closest to the desired color. The color combination labeled on the box can then be used for modifying the color of the object in a software program. For more information, see the software program Help topics. Manual color correction may be necessary to utilize the selected color conversion table for the particular object.

Selecting which Color Samples set to use for a particular color‑matching problem depends on the Color Correction setting being used (Auto, Off, or Manual), the type of object being printed (text, graphics, or images), and how the color of the object is specified in the software program (RGB or CMYK combinations). When the printer Color Correction setting is set to Off, the color is based on the print job information; and no color conversion is implemented.

Note: The Color Samples pages are not useful if the software program does not specify colors with RGB or CMYK combinations. Additionally, certain situations exist in which the software program or the computer operating system adjusts the RGB or CMYK combinations specified in the program through color management. The resulting printed color may not be an exact match of the Color Samples pages.

Show 7 more labels / short text on this page
Troubleshooting 234 · RGB Image · RGB Text · RGB Graphics · CMYK Image · CMYK Text · CMYK Graphics
Page 235 of the Lexmark 356 user manual — Contacting Customer Support
Page 235 · click to enlarge
Page 235

What are detailed Color Samples and how do I access them?

Detailed Color Samples sets are available only through the Embedded Web Server of a network printer. A detailed Color Samples set contains a range of shades (displayed as colored boxes) that are similar to a user‑defined RGB or CMYK value. The likeness of the colors in the set are dependent on the value entered in the RGB or CMYK Increment box.

To access a detailed Color Samples set from the Embedded Web Server:

1 Type the printer IP address into the address field of your Web browser.

2 Click Configuration.

3 Click Color Samples.

4 Click Detailed Options to narrow the set to one color range.

5 When the Detailed Options page appears, select a color conversion table.

6 Enter the RGB or CMYK color number.

7 Enter an Increment value from 1–255.

8 Click Print to print the detailed Color Samples set.

Embedded Web Server does not open

These are possible solutions. Try one or more of the following:

C HECK THE NETWORK CONNECTIONS

Make sure the printer and computer are turned on and connected to the same network.

C HECK THE NETWORK SETTINGS

Depending on the network settings, you may need to type https:// instead of http:// before the printer IP address to access the Embedded Web Server. For more information, see your system administrator.

Contacting Customer Support

When you call Customer Support, describe the problem you are experiencing, the message on the display, and the troubleshooting steps you have already taken to find a solution.

You need to know your printer model, type, and serial number. For more information, see the label on the inside top front cover of the printer. The serial number is also listed on the menu settings page.

In the U.S. or Canada, call 1‑800‑539‑6275. For other countries/regions, visit the Lexmark Web site at www.lexmark.com.

Troubleshooting 235

Page 236 of the Lexmark 356 user manual — GOVERNMENT END USERS
Page 236 · click to enlarge
Page 236

Notices

Product information

Product name:

Lexmark X543, X544, X544n, X544dn, X544dw, X544dtn, X546dtn

Machine type:

Model(s):

131, 133, 138, 332, 333, 336, 337, 352, 356, 382, 383, 386, 387, 392, 393, 396, 397

Edition notice

The following paragraph does not apply to any country where such provisions are inconsistent with local law: LEXMARK INTERNATIONAL, INC., PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain transactions; therefore, this statement may not apply to you.

This publication could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in later editions. Improvements or changes in the products or the programs described may be made at any time.

References in this publication to products, programs, or services do not imply that the manufacturer intends to make these available in all countries in which it operates. Any reference to a product, program, or service is not intended to state or imply that only that product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any existing intellectual property right may be used instead. Evaluation and verification of operation in conjunction with other products, programs, or services, except those expressly designated by the manufacturer, are the user’s responsibility.

For Lexmark technical support, visit http://support.lexmark.com.

For information on supplies and downloads, visit www.lexmark.com.

© 2012 Lexmark International, Inc.

All rights reserved.

GOVERNMENT END USERS

The Software Program and any related documentation are "Commercial Items," as that term is defined in 48 C.F.R. 2.101, "Computer Software" and "Commercial Computer Software Documentation," as such terms are used in 48 C.F.R. 12.212 or 48 C.F.R. 227.7202, as applicable. Consistent with 48 C.F.R. 12.212 or 48 C.F.R. 227.7202-1 through 227.7207-4, as applicable, the Commercial Computer Software and Commercial Software Documentation are licensed to the U.S. Government end users (a) only as Commercial Items and (b) with only those rights as are granted to all other end users pursuant to the terms and conditions herein.

7525, 4989 · November 2012

Page 237 of the Lexmark 356 user manual — Modular component notice
Page 237 · click to enlarge
Page 237

Trademarks

Lexmark, Lexmark with diamond design, and MarkVision are trademarks of Lexmark International, Inc., registered in the United States and/or other countries.

ScanBack is a trademark of Lexmark International, Inc.

PCL® is a registered trademark of the Hewlett-Packard Company. PCL is Hewlett-Packard Company’s designation of a set of printer commands (language) and functions included in its printer products. This printer is intended to be compatible with the PCL language. This means the printer recognizes PCL commands used in various application programs, and that the printer emulates the functions corresponding to the commands.

All other trademarks are the property of their respective owners.

Federal Communications Commission (FCC) compliance information statement

This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

The FCC Class B limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult your point of purchase or service representative for additional suggestions.

The manufacturer is not responsible for radio or television interference caused by using other than recommended cables or by unauthorized changes or modifications to this equipment. Unauthorized changes or modifications could void the user's authority to operate this equipment.

Any questions regarding this compliance information statement should be directed to:

Director of Lexmark Technology & Services Lexmark International, Inc. 740 West New Circle Road Lexington, KY 40550 (859) 232–3000

Modular component notice

Wireless‑equipped models contain the following modular component(s):

Lexmark Regulatory Type/Model LEX-M04-001, FCC ID: IYLLEXM04001; IC:2376A-M04001

Page 238 of the Lexmark 356 user manual — Static sensitivity notice
Page 238 · click to enlarge
Page 238

Noise emission levels

The following measurements were made in accordance with ISO 7779 and reported in conformance with ISO 9296.

1-meter average sound pressure, dBA

Values are subject to change. See www.lexmark.com for current values.

Waste from Electrical and Electronic Equipment (WEEE) directive

The WEEE logo signifies specific recycling programs and procedures for electronic products in countries of the European Union. We encourage the recycling of our products. If you have further questions about recycling options, visit the Lexmark Web site at www.lexmark.com for your local sales office phone number.

Static sensitivity notice

This symbol identifies static-sensitive parts. Do not touch in the areas near these symbols without first touching the metal frame of the printer.

Printing 48 dBA · Ready 32 dBA

Page 239 of the Lexmark 356 user manual — Laser advisory label
Page 239 · click to enlarge
Page 239

ENERGY STAR

Any Lexmark product bearing the ENERGY STAR emblem on the product or on a start-up screen is certified to comply with Environmental Protection Agency (EPA) ENERGY STAR requirements as configured when shipped by Lexmark.

Mercury statement

This product contains mercury in the lamp (

Temperature information

Ambient temperature 15.6C° – 32.2C°

Shipping and storage temperature ‑40.0C° – 60.0C°

Laser notice

The printer is certified in the U.S. to conform to the requirements of DHHS 21 CFR Subchapter J for Class I (1) laser products, and elsewhere is certified as a Class I laser product conforming to the requirements of IEC 60825-1.

Class I laser products are not considered to be hazardous. The printer contains internally a Class IIIb (3b) laser that is nominally a 7 milliwatt gallium arsenide laser operating in the wavelength of 655-675 nanometers. The laser system and printer are designed so there is never any human access to laser radiation above a Class I level during normal operation, user maintenance, or prescribed service condition.

Laser advisory label

A laser notice label may be affixed to this printer as shown:

Page 240 of the Lexmark 356 user manual — Power Saver
Page 240 · click to enlarge
Page 240

Opasnost - Nevidljivo lasersko zračenje kada su kasete uklonjene i poništena sigurnosna veza. Izbjegavati izlaganje zracima.

NEBEZPEČÍ - Když jsou vyjmuty kazety a je odblokována pojistka, ze zařízení je vysíláno neviditelné laserové záření. Nevystavujte se působení laserového paprsku.

FARE - Usynlig laserstråling, når patroner fjernes, og spærreanordningen er slået fra. Undgå at blive udsat for laserstrålen.

VAARA - Näkymätöntä lasersäteilyä on varottava, kun värikasetit on poistettu ja lukitus on auki. Vältä lasersäteelle altistumista.

ΚΙΝΔΥΝΟΣ - Έκλυση αόρατης ακτινοβολίας laser κατά την αφαίρεση των κασετών και την απασφάλιση της μανδάλωσης. Αποφεύγετε την έκθεση στην ακτινοβολία laser.

VESZÉLY – Nem látható lézersugárzás fordulhat elő a patronok eltávolításakor és a zárószerkezet felbontásakor. Kerülje a lézersugárnak való kitettséget. PERICOLO - Emissione di radiazioni laser invisibili durante la rimozione delle cartucce e del blocco. Evitare l´esposizione al raggio laser.

FARE – Usynlig laserstråling når kassettene tas ut og sperren er satt ut av spill. Unngå eksponering for laserstrålen.

ОПАСНО! Невидимое лазерное излучение при извлеченных картриджах и снятии блокировки. Избегайте воздействия лазерных лучей. Pozor – Nebezpečenstvo neviditeľného laserového žiarenia pri odobratých kazetách a odblokovanej poistke. Nevystavujte sa lúčom.

FARA – Osynlig laserstrålning när patroner tas ur och spärrmekanismen är upphävd. Undvik exponering för laserstrålen.

危险 - 当移除碳粉盒及互锁失效时会产生看不见的激光辐射,请避免暴露在激光光束下。

危險 - 移除碳粉匣與安全連續開關失效時會 產 生看不見的雷射輻射。請避免曝露在雷射光束下。

危険 - カートリッジが取り外され、内部ロックが無効になると、見えないレーザー光が放射されます。 このレーザー光に当たらないようにしてください。

Power consumption

Product power consumption

The following table documents the power consumption characteristics of the product.

Mode Description Power consumption (Watts)

Printing The product is generating hard‑copy output from electronic inputs. 540 W

Copying The product is generating hard‑copy output from hard‑copy original documents.

510 W

Scanning The product is scanning hard‑copy documents. 60 W

Ready The product is waiting for a print job. 50 W

Power Saver The product is in energy‑saving mode. 24 W

Off The product is plugged into a wall outlet, but the power switch is turned off. 0 W

The power consumption levels listed in the previous table represent time-averaged measurements. Instantaneous power draws may be substantially higher than the average.

Values are subject to change. See www.lexmark.com for current values.

Power Saver

This product is designed with an energy-saving mode called Power Saver. The Power Saver Mode is equivalent to the Sleep Mode. The Power Saver Mode saves energy by lowering power consumption during extended periods of inactivity. The Power Saver Mode is automatically engaged after this product is not used for a specified period of time, called the Power Saver Timeout.

Page 241 of the Lexmark 356 user manual — Notice to users of the US telephone network: FCC requirements
Page 241 · click to enlarge
Page 241

Factory default Power Saver Timeout for this product (in minutes): 110V = 45 minutes, 220V = 60 minutes

By using the configuration menus, the Power Saver Timeout can be modified between 1 minute and 240 minutes. Setting the Power Saver Timeout to a low value reduces energy consumption, but may increase the response time of the product. Setting the Power Saver Timeout to a high value maintains a fast response, but uses more energy.

Off mode

If this product has an off mode which still consumes a small amount of power, then to completely stop product power consumption, disconnect the power supply cord from the wall outlet.

Total energy usage

It is sometimes helpful to calculate the total product energy usage. Since power consumption claims are provided in power units of Watts, the power consumption should be multiplied by the time the product spends in each mode in order to calculate energy usage. The total product energy usage is the sum of each mode's energy usage.

Industry Canada compliance statement

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Standard ICES-003.

Avis de conformité aux normes de l’industrie du Canada

Cet appareil numérique de classe B est conforme aux exigences de la norme canadienne relative aux équipements pouvant causer des interférences NMB-003.

Notice to users of the US telephone network: FCC requirements

This equipment complies with Part 68 of the FCC rules and the requirements adopted by the Administrative Council for Terminal Attachments (ACTA). On the back of this equipment is a label that contains, among other information, a product identifier in the format US:AAAEQ##TXXXX. If requested, this number must be provided to your telephone company.

This equipment uses the RJ-11C Universal Service Order Code (USOC) jack.

A plug and jack used to connect this equipment to the premises’ wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. See your setup documentation for more information.

The Ringer Equivalence Number (REN) is used to determine the number of devices that may be connected to a telephone line. Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most but not all areas, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact your local telephone company. For products approved after July 23, 2001, the REN for this product is part of the product identifier that has the format US:AAAEQ##TXXXX. The digits represented by ## are the REN without a decimal point (for example, 03 is a REN of 0.3). For earlier products, the REN is shown separately on the label.

Page 242 of the Lexmark 356 user manual — Notice to users of the Canadian telephone network
Page 242 · click to enlarge
Page 242

If this equipment causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. If advance notice is not practical, the telephone company will notify the customer as soon as possible. You will also be advised of your right to file a complaint with the FCC.

The telephone company may make changes in its facilities, equipment, operations or procedures that could affect the operation of this equipment. If this happens, the telephone company will provide advance notice in order for you to make necessary modifications to maintain uninterrupted service.

If you experience trouble with this equipment, for repair or warranty information, contact Lexmark International, Inc. at www.lexmark.com or your Lexmark representative. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved.

This equipment contains no user serviceable parts. For repair and warranty information, contact Lexmark International, Inc. See the previous paragraph for contact information.

Connection to party line service is subject to state tariffs. Contact the state public utility commission, public service commission, or corporation commission for information.

If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this equipment does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer.

Telephone companies report that electrical surges, typically lightning transients, are very destructive to customer terminal equipment connected to AC power sources. This has been identified as a major nationwide problem. It is recommended that the customer install an appropriate AC surge arrestor in the AC outlet to which this device is connected. An appropriate AC surge arrestor is defined as one that is suitably rated, and certified by UL (Underwriter's Laboratories), another NRTL (Nationally Recognized Testing Laboratory), or a recognized safety certification body in the country/region of use. This is to avoid damage to the equipment caused by local lightning strikes and other electrical surges.

The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other electronic device, including fax machines, to send any message unless said message clearly contains in a margin at the top or bottom of each transmitted page or on the first page of the transmission, the date and time it is sent and an identification of the business or other entity, or other individual sending the message, and the telephone number of the sending machine or such business, other entity, or individual. (The telephone number provided may not be a 900 number or any other number for which charges exceed local or long-distance transmission charges.)

See your user documentation in order to program this information into your fax machine.

Notice to users of the Canadian telephone network

This product meets the applicable Industry Canada technical specifications. The Ringer Equivalence Number (REN) is an indication of the maximum number of terminals allowed to be connected to a telephone interface. The terminus of an interface may consist of any combination of devices, subject only to the requirement that the sum of the RENs of all the devices does not exceed five. The modem REN is located on the rear of the equipment on the product labeling.

Telephone companies report that electrical surges, typically lightning transients, are very destructive to customer terminal equipment connected to AC power sources. This has been identified as a major nationwide problem. It is recommended that the customer install an appropriate AC surge arrestor in the AC outlet to which this device is connected. An appropriate AC surge arrestor is defined as one that is suitably rated, and certified by UL (Underwriter’s Laboratories), another NRTL (Nationally Recognized Testing Laboratory), or a recognized safety certification body in the country/region of use. This is to avoid damage to the equipment caused by local lightning strikes and other electrical surges.

This equipment uses CA11A telephone jacks.

Page 243 of the Lexmark 356 user manual — South Africa telecommunications notice
Page 243 · click to enlarge
Page 243

Avis réservé aux utilisateurs du réseau téléphonique du Canada

Ce produit est conforme aux spécifications techniques d’Industrie Canada. Le numéro REN (ringer equivalence number : numéro d’équivalence de sonnerie) fournit une indication du nombre maximum de terminaux pouvant être connectés à l’interface téléphonique. En bout de ligne, le nombre d’appareils qui peuvent être connectés n’est pas directement limité, mais la somme des REN de ces appareils ne doit pas dépasser cinq. Le numéro REN du modem est indiqué sur l’étiquette produit située à l’arrière de l’équipement.

Les compagnies de téléphone constatent que les surtensions électriques, en particulier celles dues à la foudre, entraînent d'importants dégâts sur les terminaux privés connectés à des sources d’alimentation CA. Il s’agit-là d’un problème majeur d’échelle nationale. En conséquence, il vous est recommandé de brancher un parasurtenseur dans la prise de courant à laquelle l’équipement est connecté. Utilisez un parasurtenseur répondant à des caractéristiques nominales satisfaisantes et certifié par le laboratoire d’assureurs UL (Underwriter’s Laboratories), un autre laboratoire agréé de type NRTL (Nationally Recognized Testing Laboratory) ou un organisme de certification agréé dans votre région ou pays. Ceci prévient tout endommagement de l’équipement causé par les orages et autres surtensions électriques.

Cet équipement utilise des prises de téléphone CA11A.

Notice to users of the New Zealand telephone network

The following are special conditions for the Facsimile User Instructions. The grant of a telepermit for any item of terminal equipment indicates only that Telecom has accepted that the item complies with minimum conditions for connection to its network. It indicates no endorsement of the product by Telecom, nor does it provide any sort of warranty. Above all, it provides no assurance that any item will work correctly in all respects with another item of telepermitted equipment of a different make or model, nor does it imply that any product is compatible with all of Telecom's network services.

This equipment shall not be set up to make automatic calls to the Telecom's 111 Emergency Service.

This equipment may not provide for the effective hand-over of a call to another device connected to the same line.

This equipment should not be used under any circumstances that may constitute a nuisance to other Telecom customers.

Some parameters required for compliance with Telecom's telepermit requirements are dependent on the equipment associated with this device. The associated equipment shall be set to operate within the following limits for compliance to Telecom's specifications:

  • There shall be no more than 10 call attempts to the same number within any 30 minute period for any single manual call initiation, and
  • The equipment shall go on-hook for a period of not less than 30 seconds between the end of one attempt and the beginning of the next call attempt.
  • The equipment shall be set to ensure that automatic calls to different numbers are spaced such that there is not less than 5 seconds between the end of one call attempt and the beginning of another.

South Africa telecommunications notice

This modem must be used in conjunction with an approved surge protection device when connected to the PSTN.

Page 244 of the Lexmark 356 user manual — Regulatory notices for wireless products
Page 244 · click to enlarge
Page 244

Using this product in Switzerland

This product requires a Swiss billing tone filter (Lexmark part number 14B5109 or 80D1877) to be installed on any line which receives metering pulses in Switzerland. The Lexmark filter must be used, as metering pulses are present on all analog telephone lines in Switzerland.

Utilisation de ce produit en Suisse

Cet appareil nécessite l’utilisation d’un filtre de tonalité de facturation suisse (nº de référence Lexmark : 14B5109 ou 80D1877) devant être installé sur toute ligne recevant des impulsions de comptage en Suisse. Ce filtre doit être utilisé pour toute installation car ces impulsions existent sur toutes les lignes téléphoniques suisses.

Verwendung dieses Produkts in der Schweiz

Für dieses Produkt muss ein schweizerischer Billing Tone Filter zur Zählzeichenübertragung (Lexmark Teilenummer 14B5109 oder 80D1877) für jede Leitung installiert werden, über die in der Schweiz Zeitsteuertakte übertragen werden. Die Verwendung des Lexmark Filters ist obligatorisch, da in allen analogen Telefonleitungen in der Schweiz Zeitsteuertakte vorhanden sind.

Uso del prodotto in Svizzera

Questo prodotto richiede un filtro toni Billing svizzero, (codice Lexmark 14B5109 o 80D1877) da installare su tutte le linee che ricevono impulsi remoti in Svizzera. È necessario utilizzare il filtro Lexmark poiché gli impulsi remoti sono presenti su tutte le linee analogiche in Svizzera.

European Community (EC) directives conformity

This product is in conformity with the protection requirements of EC Council directives 2004/108/EC, 2006/95/EC and 2009/125/EC on the approximation and harmonization of the laws of the Member States relating to electromagnetic compatibility, safety of electrical equipment designed for use within certain voltage limits and the ecodesign of energy- related products.

The manufacturer of this product is: Lexmark International, Inc., 740 West New Circle Road, Lexington, KY, 40550 USA. The authorized representative is: Lexmark International Technology Hungária Kft., 8 Lechner Ödön fasor, Millennium Tower III, 1095 Budapest HUNGARY, A declaration of conformity to the requirements of the Directives is available upon request from the Authorized Representative.

This product satisfies the Class B limits of EN 55022 and safety requirements of EN 60950.

Regulatory notices for wireless products

This section contains the following regulatory information pertaining to wireless products that contain transmitters, for example, but not limited to, wireless network cards or proximity card readers.

Page 245 of the Lexmark 356 user manual — Industry Canada (Canada)
Page 245 · click to enlarge
Page 245

Exposure to radio frequency radiation

The radiated output power of this device is far below the radio frequency exposure limits of the FCC and other regulatory agencies. A minimum separation of 20 cm (8 inches) must be maintained between the antenna and any persons for this device to satisfy the RF exposure requirements of the FCC and other regulatory agencies.

Industry Canada (Canada)

This device complies with Industry Canada specification RSS-210. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

This device has been designed to operate only with the antenna provided. Use of any other antenna is strictly prohibited per regulations of Industry Canada.

To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing.

The installer of this radio equipment must ensure that the antenna is located or pointed such that it does not emit RF fields in excess of Health Canada limits for the general population; consult Safety Code 6, obtainable from Health Canada's Web site www.hc-sc.gc.ca/rpb

The term "IC:" before the certification/registration number only signifies that the Industry Canada technical specifications were met.

Industry Canada (Canada)

Cet appareil est conforme à la norme RSS-210 d'Industry Canada. Son fonctionnement est soumis aux deux conditions suivantes :

(1) cet appareil ne doit pas provoquer d'interférences et (2) il doit accepter toute interférence reçue, y compris celles risquant d'altérer son fonctionnement.

Cet appareil a été conçu pour fonctionner uniquement avec l'antenne fournie. L'utilisation de toute autre antenne est strictement interdite par la réglementation d'Industry Canada.

En application des réglementations d'Industry Canada, l'utilisation d'une antenne de gain supérieur est strictement interdite.

Pour empêcher toute interférence radio au service faisant l'objet d'une licence, cet appareil doit être utilisé à l'intérieur et loin des fenêtres afin de garantir une protection optimale.

Si le matériel (ou son antenne d'émission) est installé à l'extérieur, il doit faire l'objet d'une licence.

L'installateur de cet équipement radio doit veiller à ce que l'antenne soit implantée et dirigée de manière à n'émettre aucun champ HF dépassant les limites fixées pour l'ensemble de la population par Santé Canada. Reportez-vous au Code de sécurité 6 que vous pouvez consulter sur le site Web de Santé Canada www.hc-sc.gc.ca/rpb

Le terme « IC » précédant le numéro de d'accréditation/inscription signifie simplement que le produit est conforme aux spécifications techniques d'Industry Canada.

Page 246 of the Lexmark 356 user manual — RO SE SI SK TR UK
Page 246 · click to enlarge
Page 246

Notice to users in the European Union

This product is in conformity with the protection requirements of EC Council directives 2004/108/EC, 2006/95/EC, 1999/5/EC, and 2009/125/EC on the approximation and harmonization of the laws of the Member States relating to electromagnetic compatibility, safety of electrical equipment designed for use within certain voltage limits, radio equipment and telecommunications terminal equipment and on the ecodesign of energy-related products.

Compliance is indicated by the CE marking.

The manufacturer of this product is: Lexmark International, Inc., 740 West New Circle Road, Lexington, KY, 40550 USA. The authorized representative is: Lexmark International Technology Hungária Kft., 8 Lechner Ödön fasor, Millennium Tower III, 1095 Budapest HUNGARY, A declaration of conformity to the requirements of the Directives is available upon request from the Authorized Representative.

This product satisfies the Class B limits of EN 55022 and safety requirements of EN 60950.

Products equipped with 2.4GHz Wireless LAN option are in conformity with the protection requirements of EC Council directives 2004/108/EC, 2006/95/EC, 1999/5/EC, and 2009/125/EC on the approximation and harmonization of the laws of the Member States relating to electromagnetic compatibility, safety of electrical equipment designed for use within certain voltage limits and on radio equipment and telecommunications terminal equipment and on the ecodesign of energy-related products.

Compliance is indicated by the CE marking.

Operation is allowed in all EU and EFTA countries, but is restricted to indoor use only.

The manufacturer of this product is: Lexmark International, Inc., 740 West New Circle Road, Lexington, KY, 40550 USA. The authorized representative is: Lexmark International Technology Hungária Kft., 8 Lechner Ödön fasor, Millennium Tower III, 1095 Budapest HUNGARY, A declaration of conformity to the requirements of the Directives is available upon request from the Authorized Representative.

This product may be used in the countries indicated in the table below.

AT BE BG CH CY CZ DE DK EE

EL ES FI FR HR HU IE IS IT

LI LT LU LV MT NL NO PL PT

RO SE SI SK TR UK

Česky Společnost Lexmark International, Inc. tímto prohlašuje, že výrobek tento výrobek je ve shodě se základními požadavky a dalšími příslušnými ustanoveními směrnice 1999/5/ES.

Dansk Lexmark International, Inc. erklærer herved, at dette produkt overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF.

Page 247 of the Lexmark 356 user manual — Notice to users in the European Union
Page 247 · click to enlarge
Page 247

Deutsch Hiermit erklärt Lexmark International, Inc., dass sich das Gerät dieses Gerät in Übereinstimmung mit den grundlegenden Anforderungen und den übrigen einschlägigen Bestimmungen der Richtlinie 1999/5/EG befindet.

Ελληνική ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ Η LEXMARK INTERNATIONAL, INC. ΔΗΛΩΝΕΙ ΟΤΙ ΑΥΤΟ ΤΟ ΠΡΟΪΟΝ ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/ΕΚ.

English Hereby, Lexmark International, Inc., declares that this type of equipment is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.

Español Por medio de la presente, Lexmark International, Inc. declara que este producto cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE.

Eesti Käesolevaga kinnitab Lexmark International, Inc., et seade see toode vastab direktiivi 1999/5/EÜ põhinõuetele ja nimetatud direktiivist tulenevatele muudele asjakohastele sätetele.

Suomi Lexmark International, Inc. vakuuttaa täten, että tämä tuote on direktiivin 1999/5/EY oleellisten vaatimusten ja muiden sitä koskevien direktiivin ehtojen mukainen.

Français Par la présente, Lexmark International, Inc. déclare que l'appareil ce produit est conforme aux exigences fondamentales et autres dispositions pertinentes de la directive 1999/5/CE.

Magyar Alulírott, Lexmark International, Inc. nyilatkozom, hogy a termék megfelel a vonatkozó alapvetõ követelményeknek és az 1999/5/EC irányelv egyéb elõírásainak.

Íslenska Hér með lýsir Lexmark International, Inc. yfir því að þessi vara er í samræmi við grunnkröfur og aðrar kröfur, sem gerðar eru í tilskipun 1999/5/EC.

Italiano Con la presente Lexmark International, Inc. dichiara che questo questo prodotto è conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE.

Latviski Ar šo Lexmark International, Inc. deklarē, ka šis izstrādājums atbilst Direktīvas 1999/5/EK būtiskajām prasībām un citiem ar to saistītajiem noteikumiem.

Lietuvių Šiuo Lexmark International, Inc. deklaruoja, kad šis produktas atitinka esminius reikalavimus ir kitas 1999/5/EB direktyvos nuostatas.

Malti Bil-preżenti, Lexmark International, Inc., jiddikjara li dan il-prodott huwa konformi mal-ħtiġijiet essenzjali u ma dispożizzjonijiet oħrajn relevanti li jinsabu fid-Direttiva 1999/5/KE.

Nederlands Hierbij verklaart Lexmark International, Inc. dat het toestel dit product in overeenstemming is met de essentiële

eisen en de andere relevante bepalingen van richtlijn 1999/5/EG.

Norsk Lexmark International, Inc. erklærer herved at dette produktet er i samsvar med de grunnleggende krav og øvrige relevante krav i direktiv 1999/5/EF.

Polski Niniejszym Lexmark International, Inc. oświadcza, że niniejszy produkt jest zgodny z zasadniczymi wymogami oraz pozostałymi stosownymi postanowieniami Dyrektywy 1999/5/EC.

Português A Lexmark International Inc. declara que este este produto está conforme com os requisitos essenciais e outras disposições da Diretiva 1999/5/CE.

Slovensky Lexmark International, Inc. týmto vyhlasuje, že tento produkt spĺňa základné požiadavky a všetky

príslušné ustanovenia smernice 1999/5/ES.

Slovensko Lexmark International, Inc. izjavlja, da je ta izdelek v skladu z bistvenimi zahtevami in ostalimi

relevantnimi določili direktive 1999/5/ES.

Svenska Härmed intygar Lexmark International, Inc. att denna produkt står i överensstämmelse med de väsentliga egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv 1999/5/EG.

Page 248 of the Lexmark 356 user manual — Limited warranty service
Page 248 · click to enlarge
Page 248

STATEMENT OF LIMITED WARRANTY FOR LEXMARK LASER PRINTERS,

LEXMARK LED PRINTERS, AND LEXMARK MULTIFUNCTION LASER PRINTERS

Lexmark International, Inc., Lexington, KY

This limited warranty applies to the United States and Canada. For customers outside the U.S., refer to the country- specific warranty information that came with your product.

This limited warranty applies to this product only if it was originally purchased for your use, and not for resale, from Lexmark or a Lexmark Remarketer, referred to in this statement as “Remarketer.”

Limited warranty

Lexmark warrants that this product:

—Is manufactured from new parts, or new and serviceable used parts, which perform like new parts

—Is, during normal use, free from defects in material and workmanship

If this product does not function as warranted during the warranty period, contact a Remarketer or Lexmark for repair or replacement (at Lexmark's option).

If this product is a feature or option, this statement applies only when that feature or option is used with the product for which it was intended. To obtain warranty service, you may be required to present the feature or option with the product.

If you transfer this product to another user, warranty service under the terms of this statement is available to that user for the remainder of the warranty period. You should transfer proof of original purchase and this statement to that user.

Limited warranty service

The warranty period starts on the date of original purchase as shown on the purchase receipt and ends 12 months later provided that the warranty period for any supplies and for any maintenance items included with the printer shall end earlier if it, or its original contents, are substantially used up, depleted, or consumed. Fuser Units, Transfer/Transport Units, Paper Feed items, if any, and any other items for which a Maintenance Kit is available are substantially consumed when the printer displays a “Life Warning” or “Scheduled Maintenance” message for such item.

To obtain warranty service you may be required to present proof of original purchase. You may be required to deliver your product to the Remarketer or Lexmark, or ship it prepaid and suitably packaged to a Lexmark designated location. You are responsible for loss of, or damage to, a product in transit to the Remarketer or the Lexmark designated location.

When warranty service involves the exchange of a product or part, the item replaced becomes the property of the Remarketer or Lexmark. The replacement may be a new or repaired item.

The replacement item assumes the remaining warranty period of the original product.

Replacement is not available to you if the product you present for exchange is defaced, altered, in need of a repair not included in warranty service, damaged beyond repair, or if the product is not free of all legal obligations, restrictions, liens, and encumbrances.

As part of your warranty service and/or replacement, Lexmark may update the firmware in your printer to the latest version. Firmware updates may modify printer settings and cause counterfeit and/or unauthorized products, supplies, parts, materials (such as toners and inks), software, or interfaces to stop working. Authorized use of genuine Lexmark products will not be impacted.

Page 249 of the Lexmark 356 user manual — Limitation of liability
Page 249 · click to enlarge
Page 249

Before you present this product for warranty service, remove all print cartridges, programs, data, and removable storage media (unless directed otherwise by Lexmark).

For further explanation of your warranty alternatives and the nearest Lexmark authorized servicer in your area contact Lexmark on the World Wide Web.

Remote technical support is provided for this product throughout its warranty period. For products no longer covered by a Lexmark warranty, technical support may not be available or only be available for a fee.

Extent of limited warranty

Lexmark does not warrant uninterrupted or error-free operation of any product or the durability or longevity of prints produced by any product.

Warranty service does not include repair of failures caused by:

—Modification or unauthorized attachments

—Accidents, misuse, abuse or use inconsistent with Lexmark user’s guides, manuals, instructions or guidance

—Unsuitable physical or operating environment

—Maintenance by anyone other than Lexmark or a Lexmark authorized servicer

—Operation of a product beyond the limit of its duty cycle

—Use of printing media outside of Lexmark specifications

—Refurbishment, repair, refilling or remanufacture by a third party of products, supplies or parts

—Products, supplies, parts, materials (such as toners and inks), software, or interfaces not furnished by Lexmark

TO THE EXTENT PERMITTED BY APPLICABLE LAW, NEITHER LEXMARK NOR ITS THIRD PARTY SUPPLIERS OR REMARKETERS MAKE ANY OTHER WARRANTY OR CONDITION OF ANY KIND, WHETHER EXPRESS OR IMPLIED, WITH RESPECT TO THIS PRODUCT, AND SPECIFICALLY DISCLAIM THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND SATISFACTORY QUALITY. ANY WARRANTIES THAT MAY NOT BE DISCLAIMED UNDER APPLICABLE LAW ARE LIMITED IN DURATION TO THE WARRANTY PERIOD. NO WARRANTIES, EXPRESS OR IMPLIED, WILL APPLY AFTER THIS PERIOD. ALL INFORMATION, SPECIFICATIONS, PRICES, AND SERVICES ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE.

Limitation of liability

Your sole remedy under this limited warranty is set forth in this document. For any claim concerning performance or nonperformance of Lexmark or a Remarketer for this product under this limited warranty, you may recover actual damages up to the limit set forth in the following paragraph.

Lexmark's liability for actual damages from any cause whatsoever will be limited to the amount you paid for the product that caused the damages. This limitation of liability will not apply to claims by you for bodily injury or damage to real property or tangible personal property for which Lexmark is legally liable. IN NO EVENT WILL LEXMARK BE LIABLE FOR ANY LOST PROFITS, LOST SAVINGS, INCIDENTAL DAMAGE, OR OTHER ECONOMIC OR CONSEQUENTIAL DAMAGES. This is true even if you advise Lexmark or a Remarketer of the possibility of such damages. Lexmark is not liable for any claim by you based on a third party claim.

This limitation of remedies also applies to claims against any Suppliers and Remarketers of Lexmark. Lexmark's and its Suppliers' and Remarketers' limitations of remedies are not cumulative. Such Suppliers and Remarketers are intended beneficiaries of this limitation.

Page 250 of the Lexmark 356 user manual — Patent acknowledgment
Page 250 · click to enlarge
Page 250

Additional rights

Some states do not allow limitations on how long an implied warranty lasts, or do not allow the exclusion or limitation of incidental or consequential damages, so the limitations or exclusions contained above may not apply to you.

This limited warranty gives you specific legal rights. You may also have other rights that vary from state to state.

Patent acknowledgment

The use of this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for Elliptic Curve Cryptography (ECC) Cipher Suites for Transport Layer Security (TLS) implemented in the product or service.

The use of this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for TLS Elliptic Curve Cipher Suites with SHA-256/382 and AES Galois Counter Mode (GCM) implemented in the product or service.

The use of this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for TLS Suite B Profile for Transport Layer Security (TLS) implemented in the product or service.

The use of this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for Addition of the Camellia Cipher Suites to Transport Layer Security (TLS) implemented in the product or service.

The use of certain patents in this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for AES-CCM ECC Cipher Suites for TLS implemented in the product or service.

The use of this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for IKE and IKEv2 Authentication Using the Eliptic Curve Digital Signature Algorithm (ECDSA) implemented in the product or service.

The use of this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for Suite B Cryptographic Suites for IPSec implemented in the product or service.

The use of this product or service is subject to the reasonable, non-discriminatory terms in the Intellectual Property Rights (IPR) Disclosure of Certicom Corp. at the IETF for Algorithms for Internet Key Exchange version 1 (IKEv1) implemented in the product or service.

Page 252 of the Lexmark 356 user manual — Table of contents
Page 252 · click to enlarge
Page 252

Table of contents

Contentsp.2Safety informationp.10Learning about the printerp.12Finding information about the printerp.12Selecting a location for the printerp.13Printer configurationsp.15Basic functions of the scannerp.15Understanding the ADF and scanner glassp.16Understanding the printer control panelp.16Additional printer setupp.22Installing internal optionsp.22Available optionsp.22Accessing the system board to install internal optionsp.23Installing a memory cardp.25Installing a flash memory cardp.27Installing hardware optionsp.29Installing an optional tray or drawerp.29Attaching cablesp.30Verifying printer setupp.32Printing menu settings pagesp.32Printing a network setup pagep.32Setting up the printer softwarep.33Installing the printer softwarep.33Updating available options in the printer driverp.33Setting up wireless printingp.34Preparing to set up the printer on a wireless networkp.34Installing the printer on a wireless network (Windows)p.35Installing the printer on a wireless network (Macintosh)p.37Installing the printer on an Ethernet networkp.40Minimizing your printer's environmental impactp.43Saving paper and tonerp.43Using recycled paper and other office papersp.43Conserving suppliesp.44Saving energyp.45Using Eco-Modep.45Reducing printer noisep.45Adjusting Power Saverp.46Recyclingp.47Recycling Lexmark productsp.47Recycling Lexmark packagingp.47Returning Lexmark cartridges for reuse or recyclingp.47Loading paper and specialty mediap.48Linking and unlinking traysp.48Linking traysp.48Unlinking traysp.48Assigning a Custom Type namep.48Setting the Paper Size and Paper Typep.49Configuring Universal paper settingsp.49Loading the standard 250-sheet tray and optional 550-sheet trayp.50Loading the 650-sheet duo drawerp.53Using the multipurpose feederp.54Using the manual feederp.56Paper and specialty media guidep.58Paper guidelinesp.58Paper characteristicsp.58Unacceptable paperp.59Selecting paperp.59Selecting preprinted forms and letterheadp.59Storing paperp.60Supported paper sizes, types, and weightsp.60Paper sizes supported by the printerp.60Paper types supported by the printerp.61Paper types and weights supported by the printerp.62Paper capacitiesp.64Printingp.65Printing a documentp.65Printing on specialty mediap.65Tips on using letterheadp.65Tips on using transparenciesp.67Tips on using envelopesp.67Tips on using paper labelsp.68Tips on using card stockp.68Printing from a flash drivep.69Supported flash drives and file typesp.70Printing photos from a PictBridge-enabled digital camerap.71Printing information pagesp.71Printing a font sample listp.71Printing a directory listp.72Printing the print quality test pagesp.72Canceling a print jobp.72Canceling a print job from the printer control panelp.72Canceling a print job from the computerp.72Copyingp.74Making copiesp.74Making a quick copyp.74Copying using the ADFp.74Copying using the scanner glassp.75Copying photosp.75Copying on specialty mediap.75Copying to transparenciesp.75Copying to letterheadp.76Customizing copy settingsp.76Copying from one size to anotherp.76Making copies using paper from a selected trayp.77Copying on both sides of the paper (duplexing)p.77Reducing or enlarging copiesp.78Making a copy lighter or darkerp.78Adjusting copy qualityp.79Collating copiesp.79Placing separator sheets between copiesp.80Copying multiple pages onto a single sheetp.80Canceling a copy jobp.81Improving copy qualityp.81E-mailingp.82Getting ready to e-mailp.82Setting up the e-mail functionp.82Setting up the address bookp.83Creating an e-mail shortcut using the Embedded Web Serverp.83E-mailing a documentp.83Sending an e-mail using the keypadp.83Sending an e-mail using a shortcut numberp.84Sending an e-mail using the address bookp.85Canceling an e-mailp.85Faxingp.86Getting the printer ready to faxp.86Initial fax setupp.86Choosing a fax connectionp.87Connecting to an analog telephone linep.88Connecting to a DSL servicep.89Connecting to a PBX or ISDN systemp.89Connecting to a Distinctive Ring Servicep.90Connecting a telephone or answering machine to the same telephone linep.90Connecting to an adapter for your country or regionp.91Connecting to a computer with a modemp.97Setting the outgoing fax name and numberp.99Setting the date and timep.99Turning daylight saving time on or offp.99Sending a faxp.100Sending a fax using the printer control panelp.100Sending a fax using the computerp.100Creating shortcutsp.101Creating a fax destination shortcut using the Embedded Web Serverp.101Creating a fax destination shortcut using the printer control panelp.101Using shortcuts and the address bookp.102Using fax destination shortcutsp.102Using the address bookp.102Customizing fax settingsp.103Changing the fax resolutionp.103Making a fax lighter or darkerp.103Sending a fax at a scheduled timep.103Viewing a fax logp.104Canceling an outgoing faxp.104Understanding fax optionsp.105Original Sizep.105Contentp.105Sides (Duplex)p.105Resolutionp.105Darknessp.105Improving fax qualityp.106Forwarding a faxp.106Scanning to an FTP addressp.107Scanning to an FTP addressp.107Scanning to an FTP address using the keypadp.107Scanning to an FTP address using a shortcut numberp.108Creating an FTP shortcut using the Embedded Web Serverp.108Scanning to a computer or USB flash memory devicep.109Scanning to a computerp.109Scanning to a USB flash memory devicep.110Understanding scan to computer optionsp.111Sides (Duplex)p.111Darknessp.111Improving scan qualityp.111Using the Scan Center softwarep.111Understanding the Scan Center featuresp.111Using the ScanBack utilityp.112Using the ScanBack Utilityp.112Clearing jamsp.113Avoiding jamsp.113Understanding jam numbers and locationsp.114200 paper jamp.115201 paper jamp.115202 paper jamp.116230 paper jamp.118235 paper jamp.118242 and 243 paper jamsp.118250 paper jamp.119290 paper jamp.119Understanding printer menusp.121Menus listp.121Supplies menup.122Paper menup.122Default Source menup.122Size/Type menup.123Paper Texture menup.125Paper Weight menup.127Paper Loading menup.128Custom Types menup.129Custom Scan Sizes menup.130Universal Setup menup.130Reports menup.131Reports menup.131Network/Portsp.132Active NIC menup.132Network menup.132Wireless menup.134USB menup.134Settings menup.136General Settings menup.136Copy Settings menup.139Fax Settings menup.141Flash Drive menup.147Flash Drive menup.147Print Settingsp.150Setup menup.150Finishing menup.150Quality menup.152Utilities menup.154PDF menup.155PostScript menup.155PCL Emul menup.155Image menup.158PictBridge menup.158Set Date and Timep.159Understanding printer messagesp.162List of status and error messagesp.162Access USB after scanp.162Access USB nowp.162Busyp.162Calibratingp.162Call completep.162Cancel not availablep.162Cancelingp.162Check Config IDp.162Clock batteryp.162Close doorp.163<color> Lowp.163Dialingp.163DO NOT TOUCHp.163Fax completep.163Fax failedp.163Flushing bufferp.163File corruptp.163Hex Tracep.163Imaging Kitp.163Incoming callp.164Insert Tray <x>p.164Invalid Engine Codep.164Invalid Network Codep.164LADP connection errorp.164Line busyp.164Load <src> with <x>p.164Load single sheet feeder with <x>p.164Maintenancep.165Memory full, cannot send faxesp.165Menus disabledp.165No analog phone linep.165No answerp.165No dial tonep.165No recognized file typesp.165PC Kit Life Warningp.165Phone in Usep.166Picture too largep.166Power Saverp.166Printing errorp.166Programming Codep.166Reading datap.166Reading error (Remove drive)p.166Readyp.166Receiving pXXp.167Reload printed pages in Tray <x>p.167Remote Management Activep.167Remove originals from the scanner ADFp.167Remove packaging materialp.167Remove paper from standard output binp.167Replace <color> cartridgep.167Replace PC Kitp.167Scan Document Too Longp.167Scan to USB failedp.167Scanner ADF Cover Openp.168Sending pXXp.168Standard Exit Bin Fullp.168Tray <x> Emptyp.168Tray <x> Lowp.168Tray <x> Missingp.168Unsupported USB device, please removep.168Unsupported USB hub, please removep.168Unsupported Modep.168USB drive disabledp.169Use camera controls to printp.169Waitingp.169Waiting, too many eventsp.16930.yy <color> cartridge missingp.16931.yy Defective <color> Cartridgep.16931 Defective Imaging Kitp.16932.yy Replace Unsupported <color> Cartridgep.16934 Short paperp.16935 Insufficient memory to support Resource Save featurep.17037 Insufficient memory to collate jobp.17038 Memory Fullp.17039 Complex page, some data may not have printedp.17040 <color> Invalid refill, change cartridgep.17050 PPDS Font Errorp.17051 Defective flash detectedp.17052 Not enough free space in flash memory for resourcesp.17153 Unformatted flash detectedp.17154 Network <x> Software Errorp.17156 Standard USB Port Disabledp.17158 Too many flash options installedp.17158 Too many trays attachedp.17258 Input config errorp.17259 Incompatible tray <x>p.17282 Replace waste toner boxp.17282.yy Waste toner box missingp.17288.yy <color> Cartridge is lowp.17288.yy Replace <color> Cartridgep.172150 displayedp.173200.yy Paper jam <area name>p.173201.yy Paper jam <area name>p.173202.yy Paper jam <area name>p.173230.yy Paper jam <area name>p.173235 Paper Jam Check Duplexp.17324x Paper Jam Check Tray <x>p.174250.yy Paper jam <area name>p.174290–292 ADF Scanning Jamsp.174293 Paper Missingp.174293.02 Flatbed Cover Openp.174294 ADF Jamp.175840.01 Scanner Disabledp.175840.02 Scanner Auto Disabledp.175940.01p.175941.01p.175942.01p.175943.01p.176940.02p.176941.02p.176942.02p.176943.02p.176900–999 Service <message>p.176Maintaining the printerp.177Storing suppliesp.177Checking the status of suppliesp.177Checking the status of supplies from the printer control panelp.177Checking the status of supplies from a network computerp.177Ordering suppliesp.178Ordering toner cartridgesp.178Ordering imaging kitsp.179Ordering a waste toner bottlep.179Replacing suppliesp.180Replacing the waste toner bottlep.180Replacing a black imaging kitp.183Replacing a black and color imaging kitp.189Replacing a toner cartridgep.195Replacing a developer unitp.197Cleaning the exterior of the printerp.203Cleaning the scanner glassp.204Moving the printerp.204Before moving the printerp.204Moving the printer to another locationp.205Shipping the printerp.205Administrative supportp.206Finding advanced networking and administrator informationp.206Restoring the factory default settingsp.206Using the Embedded Web Serverp.206Setting up e-mail alertsp.207Viewing reportsp.207Troubleshootingp.208Solving basic printer problemsp.208Solving printing problemsp.208Multiple-language PDFs do not printp.208Printer control panel display is blank or displays only diamondsp.208Error message about reading USB drive appearsp.208Jobs do not printp.209Make sure the printer is ready to printp.209Check to see if the standard exit bin is fullp.209Check to see if the paper tray is emptyp.209Make sure the printer is connected to the networkp.209Make sure you are using a recommended USB or Ethernet cablep.209Make sure printer cables are securely connectedp.209Job takes longer than expected to printp.209Reduce the complexity of the print jobp.209Change the Page Protect setting to Offp.209Job prints from the wrong tray or on the wrong paperp.210Check the Paper Type settingp.210Incorrect or strange characters printp.210Tray linking does not workp.210Load the same size and type of paperp.210Use the same Paper Size and Paper Type settingsp.210Large jobs do not collatep.210Make sure Collate is set to Onp.210Reduce the complexity of the print jobp.210Make sure the printer has enough memoryp.211Unexpected page breaks occurp.211Solving copy problemsp.211Copier does not respondp.211Check the display for error messagesp.211Check the powerp.211Scanner unit does not closep.211Poor copy qualityp.212Check the display for error messagesp.212The toner may be lowp.212The scanner glass may be dirtyp.212The copy is too light or too darkp.212Check the quality of the original documentp.212Check the document placementp.213Unwanted toner is in the backgroundp.213Patterns (moiré) appear in the outputp.213Text is light or disappearingp.213The output appears washed out or overexposedp.213Partial document or photo copiesp.213Check the document placementp.213Check the Paper Size settingp.213Solving scanner problemsp.213Checking an unresponsive scannerp.213Scan was not successfulp.214Check the cable connectionsp.214An error may have occurred in the programp.214Scanning takes too long or freezes the computerp.214Other software programs may be interfering with scanningp.214The scan resolution may be set too highp.214Poor scanned image qualityp.214Check the display for error messagesp.214The scanner glass may be dirtyp.214Adjust the scan resolutionp.214Check the quality of the original documentp.214Check the document placementp.215Partial document or photo scansp.215Check the document placementp.215Check the paper size settingp.215Cannot scan from a computerp.215Check the display for error messagesp.215Check the powerp.215Check the cable connectionsp.215Solving fax problemsp.215Caller ID is not shownp.215Cannot send or receive a faxp.216Check the display for error messagesp.216Check the powerp.216Check the printer connectionsp.216Check the telephone wall jackp.216Review this digital phone service checklistp.216Check for a dial tonep.216Temporarily disconnect other equipmentp.217Check for jamsp.217Temporarily disable Call Waitingp.217Voice Mail service may be interfering with the fax transmissionp.217The printer memory may be fullp.217Can send but not receive faxesp.217Check to see if the paper tray is emptyp.217Check the ring count delay settingsp.217The toner may be lowp.218Can receive but not send faxesp.218Make sure the printer is in Fax modep.218Make sure the document is loaded properlyp.218Make sure the shortcut number is set up properlyp.218Received fax has poor print qualityp.218Re-send the documentp.218The toner may be lowp.218Make sure the fax transmission speed is not set too highp.218Blocking junk faxesp.219Solving option problemsp.219Option does not operate correctly or quits after it is installedp.219Reset the printerp.219Check to see if the option is connected to the printerp.219Make sure the option is installed correctlyp.219Make sure the option is selectedp.220Drawersp.220Make sure the paper is loaded correctlyp.220Reset the printerp.220Multipurpose feederp.220Check the multipurpose feederp.220Clear any jamsp.220Check the power cord connectionp.220Check the paperp.220Check the paper guidesp.220Check for service messagesp.221Memory cardp.221Solving paper feed problemsp.221Paper frequently jamsp.221Check the paperp.221Make sure there is not too much paper in the paper trayp.221Check the paper guidesp.221The paper may have absorbed moisture due to high humidityp.221Paper jam message remains after jam is clearedp.221Page that jammed does not reprint after you clear the jamp.221Solving print quality problemsp.222Blank pagesp.222Packing material may be on the print cartridgep.222The toner may be lowp.222Characters have jagged or uneven edgesp.222Clipped imagesp.223Check the guidesp.223Check the paper size settingp.223Dark linesp.223Gray backgroundp.223Check the Toner Darkness settingp.223Incorrect marginsp.224Check the paper guidesp.224Check the paper size settingp.224Light colored line, white line, or incorrectly colored linep.224A toner cartridge may be defectivep.224The imaging kit may be defectivep.224Paper curlp.225Check the Paper Type settingp.225Has the paper absorbed moisture due to high humidity?p.225Print irregularitiesp.225The paper may have absorbed moisture due to high humidityp.225Check the paper type settingp.225Check the paperp.225The toner may be lowp.225The fuser may be worn or defectivep.225Repeating defectsp.226Repeating marks occur multiple times on a pagep.226Skewed printp.226Check the paper guidesp.226Check the paperp.226Print is too lightp.226Calibrate the colorp.226Check the darkness, brightness, and contrast settingsp.227The paper may have absorbed moisture due to high humidityp.227Check the paperp.227Check the Paper Type settingp.227Make sure Color Saver is set to Offp.227A toner cartridge may be lowp.227A toner cartridge may be defectivep.227The imaging kit may be worn or defectivep.227Print is too darkp.228Calibrate the colorp.228Check the darkness, brightness, and contrast settingsp.228A toner cartridge may be defectivep.228Solid color pagesp.229Make sure the print cartridge is properly installedp.229The print cartridge may be defective or low on tonerp.229Toner fog or background shading appears on the pagep.229The imaging kit may be worn or defectivep.229Is there toner in the paper path?p.229Toner rubs offp.230Check the paper type settingp.230Check the Paper Texture settingp.230Toner specksp.230The print cartridge may be defectivep.230There is toner in the paper pathp.230Transparency print quality is poorp.231Check the transparenciesp.231Check the paper type settingp.231Uneven print densityp.231Solving color quality problemsp.232Color misregistrationp.232A toner cartridge may be defectivep.232Calibrate the colorp.232FAQ about color printingp.232Embedded Web Server does not openp.235Check the network connectionsp.235Check the network settingsp.235Contacting Customer Supportp.235Noticesp.236Product informationp.236Edition noticep.236GOVERNMENT END USERSp.236Trademarksp.237Federal Communications Commission (FCC) compliance information statementp.237Modular component noticep.237Noise emission levelsp.238Waste from Electrical and Electronic Equipment (WEEE) directivep.238Static sensitivity noticep.238ENERGY STARp.239Mercury statementp.239Temperature informationp.239Laser noticep.239Laser advisory labelp.239Power consumptionp.240Product power consumptionp.240Power Saverp.240Off modep.241Total energy usagep.241Notice to users of the US telephone network: FCC requirementsp.241Notice to users of the Canadian telephone networkp.242Notice to users of the New Zealand telephone networkp.243South Africa telecommunications noticep.243European Community (EC) directives conformityp.244Regulatory notices for wireless productsp.244Exposure to radio frequency radiationp.245Industry Canada (Canada)p.245Notice to users in the European Unionp.246STATEMENT OF LIMITED WARRANTY FOR LEXMARK LASER PRINTERS, LEXMARK LED PRINTERS, AND LEXMARK MULTIFUN ...p.248Patent acknowledgmentp.250Indexp.251
Page 253 of the Lexmark 356 user manual — Table of contents
Page 253 · click to enlarge
Page 253

Table of contents

Contentsp.2Safety informationp.10Learning about the printerp.12Finding information about the printerp.12Selecting a location for the printerp.13Printer configurationsp.15Basic functions of the scannerp.15Understanding the ADF and scanner glassp.16Understanding the printer control panelp.16Additional printer setupp.22Installing internal optionsp.22Available optionsp.22Accessing the system board to install internal optionsp.23Installing a memory cardp.25Installing a flash memory cardp.27Installing hardware optionsp.29Installing an optional tray or drawerp.29Attaching cablesp.30Verifying printer setupp.32Printing menu settings pagesp.32Printing a network setup pagep.32Setting up the printer softwarep.33Installing the printer softwarep.33Updating available options in the printer driverp.33Setting up wireless printingp.34Preparing to set up the printer on a wireless networkp.34Installing the printer on a wireless network (Windows)p.35Installing the printer on a wireless network (Macintosh)p.37Installing the printer on an Ethernet networkp.40Minimizing your printer's environmental impactp.43Saving paper and tonerp.43Using recycled paper and other office papersp.43Conserving suppliesp.44Saving energyp.45Using Eco-Modep.45Reducing printer noisep.45Adjusting Power Saverp.46Recyclingp.47Recycling Lexmark productsp.47Recycling Lexmark packagingp.47Returning Lexmark cartridges for reuse or recyclingp.47Loading paper and specialty mediap.48Linking and unlinking traysp.48Linking traysp.48Unlinking traysp.48Assigning a Custom Type namep.48Setting the Paper Size and Paper Typep.49Configuring Universal paper settingsp.49Loading the standard 250-sheet tray and optional 550-sheet trayp.50Loading the 650-sheet duo drawerp.53Using the multipurpose feederp.54Using the manual feederp.56Paper and specialty media guidep.58Paper guidelinesp.58Paper characteristicsp.58Unacceptable paperp.59Selecting paperp.59Selecting preprinted forms and letterheadp.59Storing paperp.60Supported paper sizes, types, and weightsp.60Paper sizes supported by the printerp.60Paper types supported by the printerp.61Paper types and weights supported by the printerp.62Paper capacitiesp.64Printingp.65Printing a documentp.65Printing on specialty mediap.65Tips on using letterheadp.65Tips on using transparenciesp.67Tips on using envelopesp.67Tips on using paper labelsp.68Tips on using card stockp.68Printing from a flash drivep.69Supported flash drives and file typesp.70Printing photos from a PictBridge-enabled digital camerap.71Printing information pagesp.71Printing a font sample listp.71Printing a directory listp.72Printing the print quality test pagesp.72Canceling a print jobp.72Canceling a print job from the printer control panelp.72Canceling a print job from the computerp.72Copyingp.74Making copiesp.74Making a quick copyp.74Copying using the ADFp.74Copying using the scanner glassp.75Copying photosp.75Copying on specialty mediap.75Copying to transparenciesp.75Copying to letterheadp.76Customizing copy settingsp.76Copying from one size to anotherp.76Making copies using paper from a selected trayp.77Copying on both sides of the paper (duplexing)p.77Reducing or enlarging copiesp.78Making a copy lighter or darkerp.78Adjusting copy qualityp.79Collating copiesp.79Placing separator sheets between copiesp.80Copying multiple pages onto a single sheetp.80Canceling a copy jobp.81Improving copy qualityp.81E-mailingp.82Getting ready to e-mailp.82Setting up the e-mail functionp.82Setting up the address bookp.83Creating an e-mail shortcut using the Embedded Web Serverp.83E-mailing a documentp.83Sending an e-mail using the keypadp.83Sending an e-mail using a shortcut numberp.84Sending an e-mail using the address bookp.85Canceling an e-mailp.85Faxingp.86Getting the printer ready to faxp.86Initial fax setupp.86Choosing a fax connectionp.87Connecting to an analog telephone linep.88Connecting to a DSL servicep.89Connecting to a PBX or ISDN systemp.89Connecting to a Distinctive Ring Servicep.90Connecting a telephone or answering machine to the same telephone linep.90Connecting to an adapter for your country or regionp.91Connecting to a computer with a modemp.97Setting the outgoing fax name and numberp.99Setting the date and timep.99Turning daylight saving time on or offp.99Sending a faxp.100Sending a fax using the printer control panelp.100Sending a fax using the computerp.100Creating shortcutsp.101Creating a fax destination shortcut using the Embedded Web Serverp.101Creating a fax destination shortcut using the printer control panelp.101Using shortcuts and the address bookp.102Using fax destination shortcutsp.102Using the address bookp.102Customizing fax settingsp.103Changing the fax resolutionp.103Making a fax lighter or darkerp.103Sending a fax at a scheduled timep.103Viewing a fax logp.104Canceling an outgoing faxp.104Understanding fax optionsp.105Original Sizep.105Contentp.105Sides (Duplex)p.105Resolutionp.105Darknessp.105Improving fax qualityp.106Forwarding a faxp.106Scanning to an FTP addressp.107Scanning to an FTP addressp.107Scanning to an FTP address using the keypadp.107Scanning to an FTP address using a shortcut numberp.108Creating an FTP shortcut using the Embedded Web Serverp.108Scanning to a computer or USB flash memory devicep.109Scanning to a computerp.109Scanning to a USB flash memory devicep.110Understanding scan to computer optionsp.111Sides (Duplex)p.111Darknessp.111Improving scan qualityp.111Using the Scan Center softwarep.111Understanding the Scan Center featuresp.111Using the ScanBack utilityp.112Using the ScanBack Utilityp.112Clearing jamsp.113Avoiding jamsp.113Understanding jam numbers and locationsp.114200 paper jamp.115201 paper jamp.115202 paper jamp.116230 paper jamp.118235 paper jamp.118242 and 243 paper jamsp.118250 paper jamp.119290 paper jamp.119Understanding printer menusp.121Menus listp.121Supplies menup.122Paper menup.122Default Source menup.122Size/Type menup.123Paper Texture menup.125Paper Weight menup.127Paper Loading menup.128Custom Types menup.129Custom Scan Sizes menup.130Universal Setup menup.130Reports menup.131Reports menup.131Network/Portsp.132Active NIC menup.132Network menup.132Wireless menup.134USB menup.134Settings menup.136General Settings menup.136Copy Settings menup.139Fax Settings menup.141Flash Drive menup.147Flash Drive menup.147Print Settingsp.150Setup menup.150Finishing menup.150Quality menup.152Utilities menup.154PDF menup.155PostScript menup.155PCL Emul menup.155Image menup.158PictBridge menup.158Set Date and Timep.159Understanding printer messagesp.162List of status and error messagesp.162Access USB after scanp.162Access USB nowp.162Busyp.162Calibratingp.162Call completep.162Cancel not availablep.162Cancelingp.162Check Config IDp.162Clock batteryp.162Close doorp.163<color> Lowp.163Dialingp.163DO NOT TOUCHp.163Fax completep.163Fax failedp.163Flushing bufferp.163File corruptp.163Hex Tracep.163Imaging Kitp.163Incoming callp.164Insert Tray <x>p.164Invalid Engine Codep.164Invalid Network Codep.164LADP connection errorp.164Line busyp.164Load <src> with <x>p.164Load single sheet feeder with <x>p.164Maintenancep.165Memory full, cannot send faxesp.165Menus disabledp.165No analog phone linep.165No answerp.165No dial tonep.165No recognized file typesp.165PC Kit Life Warningp.165Phone in Usep.166Picture too largep.166Power Saverp.166Printing errorp.166Programming Codep.166Reading datap.166Reading error (Remove drive)p.166Readyp.166Receiving pXXp.167Reload printed pages in Tray <x>p.167Remote Management Activep.167Remove originals from the scanner ADFp.167Remove packaging materialp.167Remove paper from standard output binp.167Replace <color> cartridgep.167Replace PC Kitp.167Scan Document Too Longp.167Scan to USB failedp.167Scanner ADF Cover Openp.168Sending pXXp.168Standard Exit Bin Fullp.168Tray <x> Emptyp.168Tray <x> Lowp.168Tray <x> Missingp.168Unsupported USB device, please removep.168Unsupported USB hub, please removep.168Unsupported Modep.168USB drive disabledp.169Use camera controls to printp.169Waitingp.169Waiting, too many eventsp.16930.yy <color> cartridge missingp.16931.yy Defective <color> Cartridgep.16931 Defective Imaging Kitp.16932.yy Replace Unsupported <color> Cartridgep.16934 Short paperp.16935 Insufficient memory to support Resource Save featurep.17037 Insufficient memory to collate jobp.17038 Memory Fullp.17039 Complex page, some data may not have printedp.17040 <color> Invalid refill, change cartridgep.17050 PPDS Font Errorp.17051 Defective flash detectedp.17052 Not enough free space in flash memory for resourcesp.17153 Unformatted flash detectedp.17154 Network <x> Software Errorp.17156 Standard USB Port Disabledp.17158 Too many flash options installedp.17158 Too many trays attachedp.17258 Input config errorp.17259 Incompatible tray <x>p.17282 Replace waste toner boxp.17282.yy Waste toner box missingp.17288.yy <color> Cartridge is lowp.17288.yy Replace <color> Cartridgep.172150 displayedp.173200.yy Paper jam <area name>p.173201.yy Paper jam <area name>p.173202.yy Paper jam <area name>p.173230.yy Paper jam <area name>p.173235 Paper Jam Check Duplexp.17324x Paper Jam Check Tray <x>p.174250.yy Paper jam <area name>p.174290–292 ADF Scanning Jamsp.174293 Paper Missingp.174293.02 Flatbed Cover Openp.174294 ADF Jamp.175840.01 Scanner Disabledp.175840.02 Scanner Auto Disabledp.175940.01p.175941.01p.175942.01p.175943.01p.176940.02p.176941.02p.176942.02p.176943.02p.176900–999 Service <message>p.176Maintaining the printerp.177Storing suppliesp.177Checking the status of suppliesp.177Checking the status of supplies from the printer control panelp.177Checking the status of supplies from a network computerp.177Ordering suppliesp.178Ordering toner cartridgesp.178Ordering imaging kitsp.179Ordering a waste toner bottlep.179Replacing suppliesp.180Replacing the waste toner bottlep.180Replacing a black imaging kitp.183Replacing a black and color imaging kitp.189Replacing a toner cartridgep.195Replacing a developer unitp.197Cleaning the exterior of the printerp.203Cleaning the scanner glassp.204Moving the printerp.204Before moving the printerp.204Moving the printer to another locationp.205Shipping the printerp.205Administrative supportp.206Finding advanced networking and administrator informationp.206Restoring the factory default settingsp.206Using the Embedded Web Serverp.206Setting up e-mail alertsp.207Viewing reportsp.207Troubleshootingp.208Solving basic printer problemsp.208Solving printing problemsp.208Multiple-language PDFs do not printp.208Printer control panel display is blank or displays only diamondsp.208Error message about reading USB drive appearsp.208Jobs do not printp.209Make sure the printer is ready to printp.209Check to see if the standard exit bin is fullp.209Check to see if the paper tray is emptyp.209Make sure the printer is connected to the networkp.209Make sure you are using a recommended USB or Ethernet cablep.209Make sure printer cables are securely connectedp.209Job takes longer than expected to printp.209Reduce the complexity of the print jobp.209Change the Page Protect setting to Offp.209Job prints from the wrong tray or on the wrong paperp.210Check the Paper Type settingp.210Incorrect or strange characters printp.210Tray linking does not workp.210Load the same size and type of paperp.210Use the same Paper Size and Paper Type settingsp.210Large jobs do not collatep.210Make sure Collate is set to Onp.210Reduce the complexity of the print jobp.210Make sure the printer has enough memoryp.211Unexpected page breaks occurp.211Solving copy problemsp.211Copier does not respondp.211Check the display for error messagesp.211Check the powerp.211Scanner unit does not closep.211Poor copy qualityp.212Check the display for error messagesp.212The toner may be lowp.212The scanner glass may be dirtyp.212The copy is too light or too darkp.212Check the quality of the original documentp.212Check the document placementp.213Unwanted toner is in the backgroundp.213Patterns (moiré) appear in the outputp.213Text is light or disappearingp.213The output appears washed out or overexposedp.213Partial document or photo copiesp.213Check the document placementp.213Check the Paper Size settingp.213Solving scanner problemsp.213Checking an unresponsive scannerp.213Scan was not successfulp.214Check the cable connectionsp.214An error may have occurred in the programp.214Scanning takes too long or freezes the computerp.214Other software programs may be interfering with scanningp.214The scan resolution may be set too highp.214Poor scanned image qualityp.214Check the display for error messagesp.214The scanner glass may be dirtyp.214Adjust the scan resolutionp.214Check the quality of the original documentp.214Check the document placementp.215Partial document or photo scansp.215Check the document placementp.215Check the paper size settingp.215Cannot scan from a computerp.215Check the display for error messagesp.215Check the powerp.215Check the cable connectionsp.215Solving fax problemsp.215Caller ID is not shownp.215Cannot send or receive a faxp.216Check the display for error messagesp.216Check the powerp.216Check the printer connectionsp.216Check the telephone wall jackp.216Review this digital phone service checklistp.216Check for a dial tonep.216Temporarily disconnect other equipmentp.217Check for jamsp.217Temporarily disable Call Waitingp.217Voice Mail service may be interfering with the fax transmissionp.217The printer memory may be fullp.217Can send but not receive faxesp.217Check to see if the paper tray is emptyp.217Check the ring count delay settingsp.217The toner may be lowp.218Can receive but not send faxesp.218Make sure the printer is in Fax modep.218Make sure the document is loaded properlyp.218Make sure the shortcut number is set up properlyp.218Received fax has poor print qualityp.218Re-send the documentp.218The toner may be lowp.218Make sure the fax transmission speed is not set too highp.218Blocking junk faxesp.219Solving option problemsp.219Option does not operate correctly or quits after it is installedp.219Reset the printerp.219Check to see if the option is connected to the printerp.219Make sure the option is installed correctlyp.219Make sure the option is selectedp.220Drawersp.220Make sure the paper is loaded correctlyp.220Reset the printerp.220Multipurpose feederp.220Check the multipurpose feederp.220Clear any jamsp.220Check the power cord connectionp.220Check the paperp.220Check the paper guidesp.220Check for service messagesp.221Memory cardp.221Solving paper feed problemsp.221Paper frequently jamsp.221Check the paperp.221Make sure there is not too much paper in the paper trayp.221Check the paper guidesp.221The paper may have absorbed moisture due to high humidityp.221Paper jam message remains after jam is clearedp.221Page that jammed does not reprint after you clear the jamp.221Solving print quality problemsp.222Blank pagesp.222Packing material may be on the print cartridgep.222The toner may be lowp.222Characters have jagged or uneven edgesp.222Clipped imagesp.223Check the guidesp.223Check the paper size settingp.223Dark linesp.223Gray backgroundp.223Check the Toner Darkness settingp.223Incorrect marginsp.224Check the paper guidesp.224Check the paper size settingp.224Light colored line, white line, or incorrectly colored linep.224A toner cartridge may be defectivep.224The imaging kit may be defectivep.224Paper curlp.225Check the Paper Type settingp.225Has the paper absorbed moisture due to high humidity?p.225Print irregularitiesp.225The paper may have absorbed moisture due to high humidityp.225Check the paper type settingp.225Check the paperp.225The toner may be lowp.225The fuser may be worn or defectivep.225Repeating defectsp.226Repeating marks occur multiple times on a pagep.226Skewed printp.226Check the paper guidesp.226Check the paperp.226Print is too lightp.226Calibrate the colorp.226Check the darkness, brightness, and contrast settingsp.227The paper may have absorbed moisture due to high humidityp.227Check the paperp.227Check the Paper Type settingp.227Make sure Color Saver is set to Offp.227A toner cartridge may be lowp.227A toner cartridge may be defectivep.227The imaging kit may be worn or defectivep.227Print is too darkp.228Calibrate the colorp.228Check the darkness, brightness, and contrast settingsp.228A toner cartridge may be defectivep.228Solid color pagesp.229Make sure the print cartridge is properly installedp.229The print cartridge may be defective or low on tonerp.229Toner fog or background shading appears on the pagep.229The imaging kit may be worn or defectivep.229Is there toner in the paper path?p.229Toner rubs offp.230Check the paper type settingp.230Check the Paper Texture settingp.230Toner specksp.230The print cartridge may be defectivep.230There is toner in the paper pathp.230Transparency print quality is poorp.231Check the transparenciesp.231Check the paper type settingp.231Uneven print densityp.231Solving color quality problemsp.232Color misregistrationp.232A toner cartridge may be defectivep.232Calibrate the colorp.232FAQ about color printingp.232Embedded Web Server does not openp.235Check the network connectionsp.235Check the network settingsp.235Contacting Customer Supportp.235Noticesp.236Product informationp.236Edition noticep.236GOVERNMENT END USERSp.236Trademarksp.237Federal Communications Commission (FCC) compliance information statementp.237Modular component noticep.237Noise emission levelsp.238Waste from Electrical and Electronic Equipment (WEEE) directivep.238Static sensitivity noticep.238ENERGY STARp.239Mercury statementp.239Temperature informationp.239Laser noticep.239Laser advisory labelp.239Power consumptionp.240Product power consumptionp.240Power Saverp.240Off modep.241Total energy usagep.241Notice to users of the US telephone network: FCC requirementsp.241Notice to users of the Canadian telephone networkp.242Notice to users of the New Zealand telephone networkp.243South Africa telecommunications noticep.243European Community (EC) directives conformityp.244Regulatory notices for wireless productsp.244Exposure to radio frequency radiationp.245Industry Canada (Canada)p.245Notice to users in the European Unionp.246STATEMENT OF LIMITED WARRANTY FOR LEXMARK LASER PRINTERS, LEXMARK LED PRINTERS, AND LEXMARK MULTIFUN ...p.248Patent acknowledgmentp.250Indexp.251
Page 254 of the Lexmark 356 user manual — Table of contents
Page 254 · click to enlarge
Page 254

Table of contents

Contentsp.2Safety informationp.10Learning about the printerp.12Finding information about the printerp.12Selecting a location for the printerp.13Printer configurationsp.15Basic functions of the scannerp.15Understanding the ADF and scanner glassp.16Understanding the printer control panelp.16Additional printer setupp.22Installing internal optionsp.22Available optionsp.22Accessing the system board to install internal optionsp.23Installing a memory cardp.25Installing a flash memory cardp.27Installing hardware optionsp.29Installing an optional tray or drawerp.29Attaching cablesp.30Verifying printer setupp.32Printing menu settings pagesp.32Printing a network setup pagep.32Setting up the printer softwarep.33Installing the printer softwarep.33Updating available options in the printer driverp.33Setting up wireless printingp.34Preparing to set up the printer on a wireless networkp.34Installing the printer on a wireless network (Windows)p.35Installing the printer on a wireless network (Macintosh)p.37Installing the printer on an Ethernet networkp.40Minimizing your printer's environmental impactp.43Saving paper and tonerp.43Using recycled paper and other office papersp.43Conserving suppliesp.44Saving energyp.45Using Eco-Modep.45Reducing printer noisep.45Adjusting Power Saverp.46Recyclingp.47Recycling Lexmark productsp.47Recycling Lexmark packagingp.47Returning Lexmark cartridges for reuse or recyclingp.47Loading paper and specialty mediap.48Linking and unlinking traysp.48Linking traysp.48Unlinking traysp.48Assigning a Custom Type namep.48Setting the Paper Size and Paper Typep.49Configuring Universal paper settingsp.49Loading the standard 250-sheet tray and optional 550-sheet trayp.50Loading the 650-sheet duo drawerp.53Using the multipurpose feederp.54Using the manual feederp.56Paper and specialty media guidep.58Paper guidelinesp.58Paper characteristicsp.58Unacceptable paperp.59Selecting paperp.59Selecting preprinted forms and letterheadp.59Storing paperp.60Supported paper sizes, types, and weightsp.60Paper sizes supported by the printerp.60Paper types supported by the printerp.61Paper types and weights supported by the printerp.62Paper capacitiesp.64Printingp.65Printing a documentp.65Printing on specialty mediap.65Tips on using letterheadp.65Tips on using transparenciesp.67Tips on using envelopesp.67Tips on using paper labelsp.68Tips on using card stockp.68Printing from a flash drivep.69Supported flash drives and file typesp.70Printing photos from a PictBridge-enabled digital camerap.71Printing information pagesp.71Printing a font sample listp.71Printing a directory listp.72Printing the print quality test pagesp.72Canceling a print jobp.72Canceling a print job from the printer control panelp.72Canceling a print job from the computerp.72Copyingp.74Making copiesp.74Making a quick copyp.74Copying using the ADFp.74Copying using the scanner glassp.75Copying photosp.75Copying on specialty mediap.75Copying to transparenciesp.75Copying to letterheadp.76Customizing copy settingsp.76Copying from one size to anotherp.76Making copies using paper from a selected trayp.77Copying on both sides of the paper (duplexing)p.77Reducing or enlarging copiesp.78Making a copy lighter or darkerp.78Adjusting copy qualityp.79Collating copiesp.79Placing separator sheets between copiesp.80Copying multiple pages onto a single sheetp.80Canceling a copy jobp.81Improving copy qualityp.81E-mailingp.82Getting ready to e-mailp.82Setting up the e-mail functionp.82Setting up the address bookp.83Creating an e-mail shortcut using the Embedded Web Serverp.83E-mailing a documentp.83Sending an e-mail using the keypadp.83Sending an e-mail using a shortcut numberp.84Sending an e-mail using the address bookp.85Canceling an e-mailp.85Faxingp.86Getting the printer ready to faxp.86Initial fax setupp.86Choosing a fax connectionp.87Connecting to an analog telephone linep.88Connecting to a DSL servicep.89Connecting to a PBX or ISDN systemp.89Connecting to a Distinctive Ring Servicep.90Connecting a telephone or answering machine to the same telephone linep.90Connecting to an adapter for your country or regionp.91Connecting to a computer with a modemp.97Setting the outgoing fax name and numberp.99Setting the date and timep.99Turning daylight saving time on or offp.99Sending a faxp.100Sending a fax using the printer control panelp.100Sending a fax using the computerp.100Creating shortcutsp.101Creating a fax destination shortcut using the Embedded Web Serverp.101Creating a fax destination shortcut using the printer control panelp.101Using shortcuts and the address bookp.102Using fax destination shortcutsp.102Using the address bookp.102Customizing fax settingsp.103Changing the fax resolutionp.103Making a fax lighter or darkerp.103Sending a fax at a scheduled timep.103Viewing a fax logp.104Canceling an outgoing faxp.104Understanding fax optionsp.105Original Sizep.105Contentp.105Sides (Duplex)p.105Resolutionp.105Darknessp.105Improving fax qualityp.106Forwarding a faxp.106Scanning to an FTP addressp.107Scanning to an FTP addressp.107Scanning to an FTP address using the keypadp.107Scanning to an FTP address using a shortcut numberp.108Creating an FTP shortcut using the Embedded Web Serverp.108Scanning to a computer or USB flash memory devicep.109Scanning to a computerp.109Scanning to a USB flash memory devicep.110Understanding scan to computer optionsp.111Sides (Duplex)p.111Darknessp.111Improving scan qualityp.111Using the Scan Center softwarep.111Understanding the Scan Center featuresp.111Using the ScanBack utilityp.112Using the ScanBack Utilityp.112Clearing jamsp.113Avoiding jamsp.113Understanding jam numbers and locationsp.114200 paper jamp.115201 paper jamp.115202 paper jamp.116230 paper jamp.118235 paper jamp.118242 and 243 paper jamsp.118250 paper jamp.119290 paper jamp.119Understanding printer menusp.121Menus listp.121Supplies menup.122Paper menup.122Default Source menup.122Size/Type menup.123Paper Texture menup.125Paper Weight menup.127Paper Loading menup.128Custom Types menup.129Custom Scan Sizes menup.130Universal Setup menup.130Reports menup.131Reports menup.131Network/Portsp.132Active NIC menup.132Network menup.132Wireless menup.134USB menup.134Settings menup.136General Settings menup.136Copy Settings menup.139Fax Settings menup.141Flash Drive menup.147Flash Drive menup.147Print Settingsp.150Setup menup.150Finishing menup.150Quality menup.152Utilities menup.154PDF menup.155PostScript menup.155PCL Emul menup.155Image menup.158PictBridge menup.158Set Date and Timep.159Understanding printer messagesp.162List of status and error messagesp.162Access USB after scanp.162Access USB nowp.162Busyp.162Calibratingp.162Call completep.162Cancel not availablep.162Cancelingp.162Check Config IDp.162Clock batteryp.162Close doorp.163<color> Lowp.163Dialingp.163DO NOT TOUCHp.163Fax completep.163Fax failedp.163Flushing bufferp.163File corruptp.163Hex Tracep.163Imaging Kitp.163Incoming callp.164Insert Tray <x>p.164Invalid Engine Codep.164Invalid Network Codep.164LADP connection errorp.164Line busyp.164Load <src> with <x>p.164Load single sheet feeder with <x>p.164Maintenancep.165Memory full, cannot send faxesp.165Menus disabledp.165No analog phone linep.165No answerp.165No dial tonep.165No recognized file typesp.165PC Kit Life Warningp.165Phone in Usep.166Picture too largep.166Power Saverp.166Printing errorp.166Programming Codep.166Reading datap.166Reading error (Remove drive)p.166Readyp.166Receiving pXXp.167Reload printed pages in Tray <x>p.167Remote Management Activep.167Remove originals from the scanner ADFp.167Remove packaging materialp.167Remove paper from standard output binp.167Replace <color> cartridgep.167Replace PC Kitp.167Scan Document Too Longp.167Scan to USB failedp.167Scanner ADF Cover Openp.168Sending pXXp.168Standard Exit Bin Fullp.168Tray <x> Emptyp.168Tray <x> Lowp.168Tray <x> Missingp.168Unsupported USB device, please removep.168Unsupported USB hub, please removep.168Unsupported Modep.168USB drive disabledp.169Use camera controls to printp.169Waitingp.169Waiting, too many eventsp.16930.yy <color> cartridge missingp.16931.yy Defective <color> Cartridgep.16931 Defective Imaging Kitp.16932.yy Replace Unsupported <color> Cartridgep.16934 Short paperp.16935 Insufficient memory to support Resource Save featurep.17037 Insufficient memory to collate jobp.17038 Memory Fullp.17039 Complex page, some data may not have printedp.17040 <color> Invalid refill, change cartridgep.17050 PPDS Font Errorp.17051 Defective flash detectedp.17052 Not enough free space in flash memory for resourcesp.17153 Unformatted flash detectedp.17154 Network <x> Software Errorp.17156 Standard USB Port Disabledp.17158 Too many flash options installedp.17158 Too many trays attachedp.17258 Input config errorp.17259 Incompatible tray <x>p.17282 Replace waste toner boxp.17282.yy Waste toner box missingp.17288.yy <color> Cartridge is lowp.17288.yy Replace <color> Cartridgep.172150 displayedp.173200.yy Paper jam <area name>p.173201.yy Paper jam <area name>p.173202.yy Paper jam <area name>p.173230.yy Paper jam <area name>p.173235 Paper Jam Check Duplexp.17324x Paper Jam Check Tray <x>p.174250.yy Paper jam <area name>p.174290–292 ADF Scanning Jamsp.174293 Paper Missingp.174293.02 Flatbed Cover Openp.174294 ADF Jamp.175840.01 Scanner Disabledp.175840.02 Scanner Auto Disabledp.175940.01p.175941.01p.175942.01p.175943.01p.176940.02p.176941.02p.176942.02p.176943.02p.176900–999 Service <message>p.176Maintaining the printerp.177Storing suppliesp.177Checking the status of suppliesp.177Checking the status of supplies from the printer control panelp.177Checking the status of supplies from a network computerp.177Ordering suppliesp.178Ordering toner cartridgesp.178Ordering imaging kitsp.179Ordering a waste toner bottlep.179Replacing suppliesp.180Replacing the waste toner bottlep.180Replacing a black imaging kitp.183Replacing a black and color imaging kitp.189Replacing a toner cartridgep.195Replacing a developer unitp.197Cleaning the exterior of the printerp.203Cleaning the scanner glassp.204Moving the printerp.204Before moving the printerp.204Moving the printer to another locationp.205Shipping the printerp.205Administrative supportp.206Finding advanced networking and administrator informationp.206Restoring the factory default settingsp.206Using the Embedded Web Serverp.206Setting up e-mail alertsp.207Viewing reportsp.207Troubleshootingp.208Solving basic printer problemsp.208Solving printing problemsp.208Multiple-language PDFs do not printp.208Printer control panel display is blank or displays only diamondsp.208Error message about reading USB drive appearsp.208Jobs do not printp.209Make sure the printer is ready to printp.209Check to see if the standard exit bin is fullp.209Check to see if the paper tray is emptyp.209Make sure the printer is connected to the networkp.209Make sure you are using a recommended USB or Ethernet cablep.209Make sure printer cables are securely connectedp.209Job takes longer than expected to printp.209Reduce the complexity of the print jobp.209Change the Page Protect setting to Offp.209Job prints from the wrong tray or on the wrong paperp.210Check the Paper Type settingp.210Incorrect or strange characters printp.210Tray linking does not workp.210Load the same size and type of paperp.210Use the same Paper Size and Paper Type settingsp.210Large jobs do not collatep.210Make sure Collate is set to Onp.210Reduce the complexity of the print jobp.210Make sure the printer has enough memoryp.211Unexpected page breaks occurp.211Solving copy problemsp.211Copier does not respondp.211Check the display for error messagesp.211Check the powerp.211Scanner unit does not closep.211Poor copy qualityp.212Check the display for error messagesp.212The toner may be lowp.212The scanner glass may be dirtyp.212The copy is too light or too darkp.212Check the quality of the original documentp.212Check the document placementp.213Unwanted toner is in the backgroundp.213Patterns (moiré) appear in the outputp.213Text is light or disappearingp.213The output appears washed out or overexposedp.213Partial document or photo copiesp.213Check the document placementp.213Check the Paper Size settingp.213Solving scanner problemsp.213Checking an unresponsive scannerp.213Scan was not successfulp.214Check the cable connectionsp.214An error may have occurred in the programp.214Scanning takes too long or freezes the computerp.214Other software programs may be interfering with scanningp.214The scan resolution may be set too highp.214Poor scanned image qualityp.214Check the display for error messagesp.214The scanner glass may be dirtyp.214Adjust the scan resolutionp.214Check the quality of the original documentp.214Check the document placementp.215Partial document or photo scansp.215Check the document placementp.215Check the paper size settingp.215Cannot scan from a computerp.215Check the display for error messagesp.215Check the powerp.215Check the cable connectionsp.215Solving fax problemsp.215Caller ID is not shownp.215Cannot send or receive a faxp.216Check the display for error messagesp.216Check the powerp.216Check the printer connectionsp.216Check the telephone wall jackp.216Review this digital phone service checklistp.216Check for a dial tonep.216Temporarily disconnect other equipmentp.217Check for jamsp.217Temporarily disable Call Waitingp.217Voice Mail service may be interfering with the fax transmissionp.217The printer memory may be fullp.217Can send but not receive faxesp.217Check to see if the paper tray is emptyp.217Check the ring count delay settingsp.217The toner may be lowp.218Can receive but not send faxesp.218Make sure the printer is in Fax modep.218Make sure the document is loaded properlyp.218Make sure the shortcut number is set up properlyp.218Received fax has poor print qualityp.218Re-send the documentp.218The toner may be lowp.218Make sure the fax transmission speed is not set too highp.218Blocking junk faxesp.219Solving option problemsp.219Option does not operate correctly or quits after it is installedp.219Reset the printerp.219Check to see if the option is connected to the printerp.219Make sure the option is installed correctlyp.219Make sure the option is selectedp.220Drawersp.220Make sure the paper is loaded correctlyp.220Reset the printerp.220Multipurpose feederp.220Check the multipurpose feederp.220Clear any jamsp.220Check the power cord connectionp.220Check the paperp.220Check the paper guidesp.220Check for service messagesp.221Memory cardp.221Solving paper feed problemsp.221Paper frequently jamsp.221Check the paperp.221Make sure there is not too much paper in the paper trayp.221Check the paper guidesp.221The paper may have absorbed moisture due to high humidityp.221Paper jam message remains after jam is clearedp.221Page that jammed does not reprint after you clear the jamp.221Solving print quality problemsp.222Blank pagesp.222Packing material may be on the print cartridgep.222The toner may be lowp.222Characters have jagged or uneven edgesp.222Clipped imagesp.223Check the guidesp.223Check the paper size settingp.223Dark linesp.223Gray backgroundp.223Check the Toner Darkness settingp.223Incorrect marginsp.224Check the paper guidesp.224Check the paper size settingp.224Light colored line, white line, or incorrectly colored linep.224A toner cartridge may be defectivep.224The imaging kit may be defectivep.224Paper curlp.225Check the Paper Type settingp.225Has the paper absorbed moisture due to high humidity?p.225Print irregularitiesp.225The paper may have absorbed moisture due to high humidityp.225Check the paper type settingp.225Check the paperp.225The toner may be lowp.225The fuser may be worn or defectivep.225Repeating defectsp.226Repeating marks occur multiple times on a pagep.226Skewed printp.226Check the paper guidesp.226Check the paperp.226Print is too lightp.226Calibrate the colorp.226Check the darkness, brightness, and contrast settingsp.227The paper may have absorbed moisture due to high humidityp.227Check the paperp.227Check the Paper Type settingp.227Make sure Color Saver is set to Offp.227A toner cartridge may be lowp.227A toner cartridge may be defectivep.227The imaging kit may be worn or defectivep.227Print is too darkp.228Calibrate the colorp.228Check the darkness, brightness, and contrast settingsp.228A toner cartridge may be defectivep.228Solid color pagesp.229Make sure the print cartridge is properly installedp.229The print cartridge may be defective or low on tonerp.229Toner fog or background shading appears on the pagep.229The imaging kit may be worn or defectivep.229Is there toner in the paper path?p.229Toner rubs offp.230Check the paper type settingp.230Check the Paper Texture settingp.230Toner specksp.230The print cartridge may be defectivep.230There is toner in the paper pathp.230Transparency print quality is poorp.231Check the transparenciesp.231Check the paper type settingp.231Uneven print densityp.231Solving color quality problemsp.232Color misregistrationp.232A toner cartridge may be defectivep.232Calibrate the colorp.232FAQ about color printingp.232Embedded Web Server does not openp.235Check the network connectionsp.235Check the network settingsp.235Contacting Customer Supportp.235Noticesp.236Product informationp.236Edition noticep.236GOVERNMENT END USERSp.236Trademarksp.237Federal Communications Commission (FCC) compliance information statementp.237Modular component noticep.237Noise emission levelsp.238Waste from Electrical and Electronic Equipment (WEEE) directivep.238Static sensitivity noticep.238ENERGY STARp.239Mercury statementp.239Temperature informationp.239Laser noticep.239Laser advisory labelp.239Power consumptionp.240Product power consumptionp.240Power Saverp.240Off modep.241Total energy usagep.241Notice to users of the US telephone network: FCC requirementsp.241Notice to users of the Canadian telephone networkp.242Notice to users of the New Zealand telephone networkp.243South Africa telecommunications noticep.243European Community (EC) directives conformityp.244Regulatory notices for wireless productsp.244Exposure to radio frequency radiationp.245Industry Canada (Canada)p.245Notice to users in the European Unionp.246STATEMENT OF LIMITED WARRANTY FOR LEXMARK LASER PRINTERS, LEXMARK LED PRINTERS, AND LEXMARK MULTIFUN ...p.248Patent acknowledgmentp.250Indexp.251
Page 255 of the Lexmark 356 user manual — Table of contents
Page 255 · click to enlarge
Page 255

Table of contents

Contentsp.2Safety informationp.10Learning about the printerp.12Finding information about the printerp.12Selecting a location for the printerp.13Printer configurationsp.15Basic functions of the scannerp.15Understanding the ADF and scanner glassp.16Understanding the printer control panelp.16Additional printer setupp.22Installing internal optionsp.22Available optionsp.22Accessing the system board to install internal optionsp.23Installing a memory cardp.25Installing a flash memory cardp.27Installing hardware optionsp.29Installing an optional tray or drawerp.29Attaching cablesp.30Verifying printer setupp.32Printing menu settings pagesp.32Printing a network setup pagep.32Setting up the printer softwarep.33Installing the printer softwarep.33Updating available options in the printer driverp.33Setting up wireless printingp.34Preparing to set up the printer on a wireless networkp.34Installing the printer on a wireless network (Windows)p.35Installing the printer on a wireless network (Macintosh)p.37Installing the printer on an Ethernet networkp.40Minimizing your printer's environmental impactp.43Saving paper and tonerp.43Using recycled paper and other office papersp.43Conserving suppliesp.44Saving energyp.45Using Eco-Modep.45Reducing printer noisep.45Adjusting Power Saverp.46Recyclingp.47Recycling Lexmark productsp.47Recycling Lexmark packagingp.47Returning Lexmark cartridges for reuse or recyclingp.47Loading paper and specialty mediap.48Linking and unlinking traysp.48Linking traysp.48Unlinking traysp.48Assigning a Custom Type namep.48Setting the Paper Size and Paper Typep.49Configuring Universal paper settingsp.49Loading the standard 250-sheet tray and optional 550-sheet trayp.50Loading the 650-sheet duo drawerp.53Using the multipurpose feederp.54Using the manual feederp.56Paper and specialty media guidep.58Paper guidelinesp.58Paper characteristicsp.58Unacceptable paperp.59Selecting paperp.59Selecting preprinted forms and letterheadp.59Storing paperp.60Supported paper sizes, types, and weightsp.60Paper sizes supported by the printerp.60Paper types supported by the printerp.61Paper types and weights supported by the printerp.62Paper capacitiesp.64Printingp.65Printing a documentp.65Printing on specialty mediap.65Tips on using letterheadp.65Tips on using transparenciesp.67Tips on using envelopesp.67Tips on using paper labelsp.68Tips on using card stockp.68Printing from a flash drivep.69Supported flash drives and file typesp.70Printing photos from a PictBridge-enabled digital camerap.71Printing information pagesp.71Printing a font sample listp.71Printing a directory listp.72Printing the print quality test pagesp.72Canceling a print jobp.72Canceling a print job from the printer control panelp.72Canceling a print job from the computerp.72Copyingp.74Making copiesp.74Making a quick copyp.74Copying using the ADFp.74Copying using the scanner glassp.75Copying photosp.75Copying on specialty mediap.75Copying to transparenciesp.75Copying to letterheadp.76Customizing copy settingsp.76Copying from one size to anotherp.76Making copies using paper from a selected trayp.77Copying on both sides of the paper (duplexing)p.77Reducing or enlarging copiesp.78Making a copy lighter or darkerp.78Adjusting copy qualityp.79Collating copiesp.79Placing separator sheets between copiesp.80Copying multiple pages onto a single sheetp.80Canceling a copy jobp.81Improving copy qualityp.81E-mailingp.82Getting ready to e-mailp.82Setting up the e-mail functionp.82Setting up the address bookp.83Creating an e-mail shortcut using the Embedded Web Serverp.83E-mailing a documentp.83Sending an e-mail using the keypadp.83Sending an e-mail using a shortcut numberp.84Sending an e-mail using the address bookp.85Canceling an e-mailp.85Faxingp.86Getting the printer ready to faxp.86Initial fax setupp.86Choosing a fax connectionp.87Connecting to an analog telephone linep.88Connecting to a DSL servicep.89Connecting to a PBX or ISDN systemp.89Connecting to a Distinctive Ring Servicep.90Connecting a telephone or answering machine to the same telephone linep.90Connecting to an adapter for your country or regionp.91Connecting to a computer with a modemp.97Setting the outgoing fax name and numberp.99Setting the date and timep.99Turning daylight saving time on or offp.99Sending a faxp.100Sending a fax using the printer control panelp.100Sending a fax using the computerp.100Creating shortcutsp.101Creating a fax destination shortcut using the Embedded Web Serverp.101Creating a fax destination shortcut using the printer control panelp.101Using shortcuts and the address bookp.102Using fax destination shortcutsp.102Using the address bookp.102Customizing fax settingsp.103Changing the fax resolutionp.103Making a fax lighter or darkerp.103Sending a fax at a scheduled timep.103Viewing a fax logp.104Canceling an outgoing faxp.104Understanding fax optionsp.105Original Sizep.105Contentp.105Sides (Duplex)p.105Resolutionp.105Darknessp.105Improving fax qualityp.106Forwarding a faxp.106Scanning to an FTP addressp.107Scanning to an FTP addressp.107Scanning to an FTP address using the keypadp.107Scanning to an FTP address using a shortcut numberp.108Creating an FTP shortcut using the Embedded Web Serverp.108Scanning to a computer or USB flash memory devicep.109Scanning to a computerp.109Scanning to a USB flash memory devicep.110Understanding scan to computer optionsp.111Sides (Duplex)p.111Darknessp.111Improving scan qualityp.111Using the Scan Center softwarep.111Understanding the Scan Center featuresp.111Using the ScanBack utilityp.112Using the ScanBack Utilityp.112Clearing jamsp.113Avoiding jamsp.113Understanding jam numbers and locationsp.114200 paper jamp.115201 paper jamp.115202 paper jamp.116230 paper jamp.118235 paper jamp.118242 and 243 paper jamsp.118250 paper jamp.119290 paper jamp.119Understanding printer menusp.121Menus listp.121Supplies menup.122Paper menup.122Default Source menup.122Size/Type menup.123Paper Texture menup.125Paper Weight menup.127Paper Loading menup.128Custom Types menup.129Custom Scan Sizes menup.130Universal Setup menup.130Reports menup.131Reports menup.131Network/Portsp.132Active NIC menup.132Network menup.132Wireless menup.134USB menup.134Settings menup.136General Settings menup.136Copy Settings menup.139Fax Settings menup.141Flash Drive menup.147Flash Drive menup.147Print Settingsp.150Setup menup.150Finishing menup.150Quality menup.152Utilities menup.154PDF menup.155PostScript menup.155PCL Emul menup.155Image menup.158PictBridge menup.158Set Date and Timep.159Understanding printer messagesp.162List of status and error messagesp.162Access USB after scanp.162Access USB nowp.162Busyp.162Calibratingp.162Call completep.162Cancel not availablep.162Cancelingp.162Check Config IDp.162Clock batteryp.162Close doorp.163<color> Lowp.163Dialingp.163DO NOT TOUCHp.163Fax completep.163Fax failedp.163Flushing bufferp.163File corruptp.163Hex Tracep.163Imaging Kitp.163Incoming callp.164Insert Tray <x>p.164Invalid Engine Codep.164Invalid Network Codep.164LADP connection errorp.164Line busyp.164Load <src> with <x>p.164Load single sheet feeder with <x>p.164Maintenancep.165Memory full, cannot send faxesp.165Menus disabledp.165No analog phone linep.165No answerp.165No dial tonep.165No recognized file typesp.165PC Kit Life Warningp.165Phone in Usep.166Picture too largep.166Power Saverp.166Printing errorp.166Programming Codep.166Reading datap.166Reading error (Remove drive)p.166Readyp.166Receiving pXXp.167Reload printed pages in Tray <x>p.167Remote Management Activep.167Remove originals from the scanner ADFp.167Remove packaging materialp.167Remove paper from standard output binp.167Replace <color> cartridgep.167Replace PC Kitp.167Scan Document Too Longp.167Scan to USB failedp.167Scanner ADF Cover Openp.168Sending pXXp.168Standard Exit Bin Fullp.168Tray <x> Emptyp.168Tray <x> Lowp.168Tray <x> Missingp.168Unsupported USB device, please removep.168Unsupported USB hub, please removep.168Unsupported Modep.168USB drive disabledp.169Use camera controls to printp.169Waitingp.169Waiting, too many eventsp.16930.yy <color> cartridge missingp.16931.yy Defective <color> Cartridgep.16931 Defective Imaging Kitp.16932.yy Replace Unsupported <color> Cartridgep.16934 Short paperp.16935 Insufficient memory to support Resource Save featurep.17037 Insufficient memory to collate jobp.17038 Memory Fullp.17039 Complex page, some data may not have printedp.17040 <color> Invalid refill, change cartridgep.17050 PPDS Font Errorp.17051 Defective flash detectedp.17052 Not enough free space in flash memory for resourcesp.17153 Unformatted flash detectedp.17154 Network <x> Software Errorp.17156 Standard USB Port Disabledp.17158 Too many flash options installedp.17158 Too many trays attachedp.17258 Input config errorp.17259 Incompatible tray <x>p.17282 Replace waste toner boxp.17282.yy Waste toner box missingp.17288.yy <color> Cartridge is lowp.17288.yy Replace <color> Cartridgep.172150 displayedp.173200.yy Paper jam <area name>p.173201.yy Paper jam <area name>p.173202.yy Paper jam <area name>p.173230.yy Paper jam <area name>p.173235 Paper Jam Check Duplexp.17324x Paper Jam Check Tray <x>p.174250.yy Paper jam <area name>p.174290–292 ADF Scanning Jamsp.174293 Paper Missingp.174293.02 Flatbed Cover Openp.174294 ADF Jamp.175840.01 Scanner Disabledp.175840.02 Scanner Auto Disabledp.175940.01p.175941.01p.175942.01p.175943.01p.176940.02p.176941.02p.176942.02p.176943.02p.176900–999 Service <message>p.176Maintaining the printerp.177Storing suppliesp.177Checking the status of suppliesp.177Checking the status of supplies from the printer control panelp.177Checking the status of supplies from a network computerp.177Ordering suppliesp.178Ordering toner cartridgesp.178Ordering imaging kitsp.179Ordering a waste toner bottlep.179Replacing suppliesp.180Replacing the waste toner bottlep.180Replacing a black imaging kitp.183Replacing a black and color imaging kitp.189Replacing a toner cartridgep.195Replacing a developer unitp.197Cleaning the exterior of the printerp.203Cleaning the scanner glassp.204Moving the printerp.204Before moving the printerp.204Moving the printer to another locationp.205Shipping the printerp.205Administrative supportp.206Finding advanced networking and administrator informationp.206Restoring the factory default settingsp.206Using the Embedded Web Serverp.206Setting up e-mail alertsp.207Viewing reportsp.207Troubleshootingp.208Solving basic printer problemsp.208Solving printing problemsp.208Multiple-language PDFs do not printp.208Printer control panel display is blank or displays only diamondsp.208Error message about reading USB drive appearsp.208Jobs do not printp.209Make sure the printer is ready to printp.209Check to see if the standard exit bin is fullp.209Check to see if the paper tray is emptyp.209Make sure the printer is connected to the networkp.209Make sure you are using a recommended USB or Ethernet cablep.209Make sure printer cables are securely connectedp.209Job takes longer than expected to printp.209Reduce the complexity of the print jobp.209Change the Page Protect setting to Offp.209Job prints from the wrong tray or on the wrong paperp.210Check the Paper Type settingp.210Incorrect or strange characters printp.210Tray linking does not workp.210Load the same size and type of paperp.210Use the same Paper Size and Paper Type settingsp.210Large jobs do not collatep.210Make sure Collate is set to Onp.210Reduce the complexity of the print jobp.210Make sure the printer has enough memoryp.211Unexpected page breaks occurp.211Solving copy problemsp.211Copier does not respondp.211Check the display for error messagesp.211Check the powerp.211Scanner unit does not closep.211Poor copy qualityp.212Check the display for error messagesp.212The toner may be lowp.212The scanner glass may be dirtyp.212The copy is too light or too darkp.212Check the quality of the original documentp.212Check the document placementp.213Unwanted toner is in the backgroundp.213Patterns (moiré) appear in the outputp.213Text is light or disappearingp.213The output appears washed out or overexposedp.213Partial document or photo copiesp.213Check the document placementp.213Check the Paper Size settingp.213Solving scanner problemsp.213Checking an unresponsive scannerp.213Scan was not successfulp.214Check the cable connectionsp.214An error may have occurred in the programp.214Scanning takes too long or freezes the computerp.214Other software programs may be interfering with scanningp.214The scan resolution may be set too highp.214Poor scanned image qualityp.214Check the display for error messagesp.214The scanner glass may be dirtyp.214Adjust the scan resolutionp.214Check the quality of the original documentp.214Check the document placementp.215Partial document or photo scansp.215Check the document placementp.215Check the paper size settingp.215Cannot scan from a computerp.215Check the display for error messagesp.215Check the powerp.215Check the cable connectionsp.215Solving fax problemsp.215Caller ID is not shownp.215Cannot send or receive a faxp.216Check the display for error messagesp.216Check the powerp.216Check the printer connectionsp.216Check the telephone wall jackp.216Review this digital phone service checklistp.216Check for a dial tonep.216Temporarily disconnect other equipmentp.217Check for jamsp.217Temporarily disable Call Waitingp.217Voice Mail service may be interfering with the fax transmissionp.217The printer memory may be fullp.217Can send but not receive faxesp.217Check to see if the paper tray is emptyp.217Check the ring count delay settingsp.217The toner may be lowp.218Can receive but not send faxesp.218Make sure the printer is in Fax modep.218Make sure the document is loaded properlyp.218Make sure the shortcut number is set up properlyp.218Received fax has poor print qualityp.218Re-send the documentp.218The toner may be lowp.218Make sure the fax transmission speed is not set too highp.218Blocking junk faxesp.219Solving option problemsp.219Option does not operate correctly or quits after it is installedp.219Reset the printerp.219Check to see if the option is connected to the printerp.219Make sure the option is installed correctlyp.219Make sure the option is selectedp.220Drawersp.220Make sure the paper is loaded correctlyp.220Reset the printerp.220Multipurpose feederp.220Check the multipurpose feederp.220Clear any jamsp.220Check the power cord connectionp.220Check the paperp.220Check the paper guidesp.220Check for service messagesp.221Memory cardp.221Solving paper feed problemsp.221Paper frequently jamsp.221Check the paperp.221Make sure there is not too much paper in the paper trayp.221Check the paper guidesp.221The paper may have absorbed moisture due to high humidityp.221Paper jam message remains after jam is clearedp.221Page that jammed does not reprint after you clear the jamp.221Solving print quality problemsp.222Blank pagesp.222Packing material may be on the print cartridgep.222The toner may be lowp.222Characters have jagged or uneven edgesp.222Clipped imagesp.223Check the guidesp.223Check the paper size settingp.223Dark linesp.223Gray backgroundp.223Check the Toner Darkness settingp.223Incorrect marginsp.224Check the paper guidesp.224Check the paper size settingp.224Light colored line, white line, or incorrectly colored linep.224A toner cartridge may be defectivep.224The imaging kit may be defectivep.224Paper curlp.225Check the Paper Type settingp.225Has the paper absorbed moisture due to high humidity?p.225Print irregularitiesp.225The paper may have absorbed moisture due to high humidityp.225Check the paper type settingp.225Check the paperp.225The toner may be lowp.225The fuser may be worn or defectivep.225Repeating defectsp.226Repeating marks occur multiple times on a pagep.226Skewed printp.226Check the paper guidesp.226Check the paperp.226Print is too lightp.226Calibrate the colorp.226Check the darkness, brightness, and contrast settingsp.227The paper may have absorbed moisture due to high humidityp.227Check the paperp.227Check the Paper Type settingp.227Make sure Color Saver is set to Offp.227A toner cartridge may be lowp.227A toner cartridge may be defectivep.227The imaging kit may be worn or defectivep.227Print is too darkp.228Calibrate the colorp.228Check the darkness, brightness, and contrast settingsp.228A toner cartridge may be defectivep.228Solid color pagesp.229Make sure the print cartridge is properly installedp.229The print cartridge may be defective or low on tonerp.229Toner fog or background shading appears on the pagep.229The imaging kit may be worn or defectivep.229Is there toner in the paper path?p.229Toner rubs offp.230Check the paper type settingp.230Check the Paper Texture settingp.230Toner specksp.230The print cartridge may be defectivep.230There is toner in the paper pathp.230Transparency print quality is poorp.231Check the transparenciesp.231Check the paper type settingp.231Uneven print densityp.231Solving color quality problemsp.232Color misregistrationp.232A toner cartridge may be defectivep.232Calibrate the colorp.232FAQ about color printingp.232Embedded Web Server does not openp.235Check the network connectionsp.235Check the network settingsp.235Contacting Customer Supportp.235Noticesp.236Product informationp.236Edition noticep.236GOVERNMENT END USERSp.236Trademarksp.237Federal Communications Commission (FCC) compliance information statementp.237Modular component noticep.237Noise emission levelsp.238Waste from Electrical and Electronic Equipment (WEEE) directivep.238Static sensitivity noticep.238ENERGY STARp.239Mercury statementp.239Temperature informationp.239Laser noticep.239Laser advisory labelp.239Power consumptionp.240Product power consumptionp.240Power Saverp.240Off modep.241Total energy usagep.241Notice to users of the US telephone network: FCC requirementsp.241Notice to users of the Canadian telephone networkp.242Notice to users of the New Zealand telephone networkp.243South Africa telecommunications noticep.243European Community (EC) directives conformityp.244Regulatory notices for wireless productsp.244Exposure to radio frequency radiationp.245Industry Canada (Canada)p.245Notice to users in the European Unionp.246STATEMENT OF LIMITED WARRANTY FOR LEXMARK LASER PRINTERS, LEXMARK LED PRINTERS, AND LEXMARK MULTIFUN ...p.248Patent acknowledgmentp.250Indexp.251
Page 256 of the Lexmark 356 user manual — Table of contents
Page 256 · click to enlarge
Page 256

Table of contents

Contentsp.2Safety informationp.10Learning about the printerp.12Finding information about the printerp.12Selecting a location for the printerp.13Printer configurationsp.15Basic functions of the scannerp.15Understanding the ADF and scanner glassp.16Understanding the printer control panelp.16Additional printer setupp.22Installing internal optionsp.22Available optionsp.22Accessing the system board to install internal optionsp.23Installing a memory cardp.25Installing a flash memory cardp.27Installing hardware optionsp.29Installing an optional tray or drawerp.29Attaching cablesp.30Verifying printer setupp.32Printing menu settings pagesp.32Printing a network setup pagep.32Setting up the printer softwarep.33Installing the printer softwarep.33Updating available options in the printer driverp.33Setting up wireless printingp.34Preparing to set up the printer on a wireless networkp.34Installing the printer on a wireless network (Windows)p.35Installing the printer on a wireless network (Macintosh)p.37Installing the printer on an Ethernet networkp.40Minimizing your printer's environmental impactp.43Saving paper and tonerp.43Using recycled paper and other office papersp.43Conserving suppliesp.44Saving energyp.45Using Eco-Modep.45Reducing printer noisep.45Adjusting Power Saverp.46Recyclingp.47Recycling Lexmark productsp.47Recycling Lexmark packagingp.47Returning Lexmark cartridges for reuse or recyclingp.47Loading paper and specialty mediap.48Linking and unlinking traysp.48Linking traysp.48Unlinking traysp.48Assigning a Custom Type namep.48Setting the Paper Size and Paper Typep.49Configuring Universal paper settingsp.49Loading the standard 250-sheet tray and optional 550-sheet trayp.50Loading the 650-sheet duo drawerp.53Using the multipurpose feederp.54Using the manual feederp.56Paper and specialty media guidep.58Paper guidelinesp.58Paper characteristicsp.58Unacceptable paperp.59Selecting paperp.59Selecting preprinted forms and letterheadp.59Storing paperp.60Supported paper sizes, types, and weightsp.60Paper sizes supported by the printerp.60Paper types supported by the printerp.61Paper types and weights supported by the printerp.62Paper capacitiesp.64Printingp.65Printing a documentp.65Printing on specialty mediap.65Tips on using letterheadp.65Tips on using transparenciesp.67Tips on using envelopesp.67Tips on using paper labelsp.68Tips on using card stockp.68Printing from a flash drivep.69Supported flash drives and file typesp.70Printing photos from a PictBridge-enabled digital camerap.71Printing information pagesp.71Printing a font sample listp.71Printing a directory listp.72Printing the print quality test pagesp.72Canceling a print jobp.72Canceling a print job from the printer control panelp.72Canceling a print job from the computerp.72Copyingp.74Making copiesp.74Making a quick copyp.74Copying using the ADFp.74Copying using the scanner glassp.75Copying photosp.75Copying on specialty mediap.75Copying to transparenciesp.75Copying to letterheadp.76Customizing copy settingsp.76Copying from one size to anotherp.76Making copies using paper from a selected trayp.77Copying on both sides of the paper (duplexing)p.77Reducing or enlarging copiesp.78Making a copy lighter or darkerp.78Adjusting copy qualityp.79Collating copiesp.79Placing separator sheets between copiesp.80Copying multiple pages onto a single sheetp.80Canceling a copy jobp.81Improving copy qualityp.81E-mailingp.82Getting ready to e-mailp.82Setting up the e-mail functionp.82Setting up the address bookp.83Creating an e-mail shortcut using the Embedded Web Serverp.83E-mailing a documentp.83Sending an e-mail using the keypadp.83Sending an e-mail using a shortcut numberp.84Sending an e-mail using the address bookp.85Canceling an e-mailp.85Faxingp.86Getting the printer ready to faxp.86Initial fax setupp.86Choosing a fax connectionp.87Connecting to an analog telephone linep.88Connecting to a DSL servicep.89Connecting to a PBX or ISDN systemp.89Connecting to a Distinctive Ring Servicep.90Connecting a telephone or answering machine to the same telephone linep.90Connecting to an adapter for your country or regionp.91Connecting to a computer with a modemp.97Setting the outgoing fax name and numberp.99Setting the date and timep.99Turning daylight saving time on or offp.99Sending a faxp.100Sending a fax using the printer control panelp.100Sending a fax using the computerp.100Creating shortcutsp.101Creating a fax destination shortcut using the Embedded Web Serverp.101Creating a fax destination shortcut using the printer control panelp.101Using shortcuts and the address bookp.102Using fax destination shortcutsp.102Using the address bookp.102Customizing fax settingsp.103Changing the fax resolutionp.103Making a fax lighter or darkerp.103Sending a fax at a scheduled timep.103Viewing a fax logp.104Canceling an outgoing faxp.104Understanding fax optionsp.105Original Sizep.105Contentp.105Sides (Duplex)p.105Resolutionp.105Darknessp.105Improving fax qualityp.106Forwarding a faxp.106Scanning to an FTP addressp.107Scanning to an FTP addressp.107Scanning to an FTP address using the keypadp.107Scanning to an FTP address using a shortcut numberp.108Creating an FTP shortcut using the Embedded Web Serverp.108Scanning to a computer or USB flash memory devicep.109Scanning to a computerp.109Scanning to a USB flash memory devicep.110Understanding scan to computer optionsp.111Sides (Duplex)p.111Darknessp.111Improving scan qualityp.111Using the Scan Center softwarep.111Understanding the Scan Center featuresp.111Using the ScanBack utilityp.112Using the ScanBack Utilityp.112Clearing jamsp.113Avoiding jamsp.113Understanding jam numbers and locationsp.114200 paper jamp.115201 paper jamp.115202 paper jamp.116230 paper jamp.118235 paper jamp.118242 and 243 paper jamsp.118250 paper jamp.119290 paper jamp.119Understanding printer menusp.121Menus listp.121Supplies menup.122Paper menup.122Default Source menup.122Size/Type menup.123Paper Texture menup.125Paper Weight menup.127Paper Loading menup.128Custom Types menup.129Custom Scan Sizes menup.130Universal Setup menup.130Reports menup.131Reports menup.131Network/Portsp.132Active NIC menup.132Network menup.132Wireless menup.134USB menup.134Settings menup.136General Settings menup.136Copy Settings menup.139Fax Settings menup.141Flash Drive menup.147Flash Drive menup.147Print Settingsp.150Setup menup.150Finishing menup.150Quality menup.152Utilities menup.154PDF menup.155PostScript menup.155PCL Emul menup.155Image menup.158PictBridge menup.158Set Date and Timep.159Understanding printer messagesp.162List of status and error messagesp.162Access USB after scanp.162Access USB nowp.162Busyp.162Calibratingp.162Call completep.162Cancel not availablep.162Cancelingp.162Check Config IDp.162Clock batteryp.162Close doorp.163<color> Lowp.163Dialingp.163DO NOT TOUCHp.163Fax completep.163Fax failedp.163Flushing bufferp.163File corruptp.163Hex Tracep.163Imaging Kitp.163Incoming callp.164Insert Tray <x>p.164Invalid Engine Codep.164Invalid Network Codep.164LADP connection errorp.164Line busyp.164Load <src> with <x>p.164Load single sheet feeder with <x>p.164Maintenancep.165Memory full, cannot send faxesp.165Menus disabledp.165No analog phone linep.165No answerp.165No dial tonep.165No recognized file typesp.165PC Kit Life Warningp.165Phone in Usep.166Picture too largep.166Power Saverp.166Printing errorp.166Programming Codep.166Reading datap.166Reading error (Remove drive)p.166Readyp.166Receiving pXXp.167Reload printed pages in Tray <x>p.167Remote Management Activep.167Remove originals from the scanner ADFp.167Remove packaging materialp.167Remove paper from standard output binp.167Replace <color> cartridgep.167Replace PC Kitp.167Scan Document Too Longp.167Scan to USB failedp.167Scanner ADF Cover Openp.168Sending pXXp.168Standard Exit Bin Fullp.168Tray <x> Emptyp.168Tray <x> Lowp.168Tray <x> Missingp.168Unsupported USB device, please removep.168Unsupported USB hub, please removep.168Unsupported Modep.168USB drive disabledp.169Use camera controls to printp.169Waitingp.169Waiting, too many eventsp.16930.yy <color> cartridge missingp.16931.yy Defective <color> Cartridgep.16931 Defective Imaging Kitp.16932.yy Replace Unsupported <color> Cartridgep.16934 Short paperp.16935 Insufficient memory to support Resource Save featurep.17037 Insufficient memory to collate jobp.17038 Memory Fullp.17039 Complex page, some data may not have printedp.17040 <color> Invalid refill, change cartridgep.17050 PPDS Font Errorp.17051 Defective flash detectedp.17052 Not enough free space in flash memory for resourcesp.17153 Unformatted flash detectedp.17154 Network <x> Software Errorp.17156 Standard USB Port Disabledp.17158 Too many flash options installedp.17158 Too many trays attachedp.17258 Input config errorp.17259 Incompatible tray <x>p.17282 Replace waste toner boxp.17282.yy Waste toner box missingp.17288.yy <color> Cartridge is lowp.17288.yy Replace <color> Cartridgep.172150 displayedp.173200.yy Paper jam <area name>p.173201.yy Paper jam <area name>p.173202.yy Paper jam <area name>p.173230.yy Paper jam <area name>p.173235 Paper Jam Check Duplexp.17324x Paper Jam Check Tray <x>p.174250.yy Paper jam <area name>p.174290–292 ADF Scanning Jamsp.174293 Paper Missingp.174293.02 Flatbed Cover Openp.174294 ADF Jamp.175840.01 Scanner Disabledp.175840.02 Scanner Auto Disabledp.175940.01p.175941.01p.175942.01p.175943.01p.176940.02p.176941.02p.176942.02p.176943.02p.176900–999 Service <message>p.176Maintaining the printerp.177Storing suppliesp.177Checking the status of suppliesp.177Checking the status of supplies from the printer control panelp.177Checking the status of supplies from a network computerp.177Ordering suppliesp.178Ordering toner cartridgesp.178Ordering imaging kitsp.179Ordering a waste toner bottlep.179Replacing suppliesp.180Replacing the waste toner bottlep.180Replacing a black imaging kitp.183Replacing a black and color imaging kitp.189Replacing a toner cartridgep.195Replacing a developer unitp.197Cleaning the exterior of the printerp.203Cleaning the scanner glassp.204Moving the printerp.204Before moving the printerp.204Moving the printer to another locationp.205Shipping the printerp.205Administrative supportp.206Finding advanced networking and administrator informationp.206Restoring the factory default settingsp.206Using the Embedded Web Serverp.206Setting up e-mail alertsp.207Viewing reportsp.207Troubleshootingp.208Solving basic printer problemsp.208Solving printing problemsp.208Multiple-language PDFs do not printp.208Printer control panel display is blank or displays only diamondsp.208Error message about reading USB drive appearsp.208Jobs do not printp.209Make sure the printer is ready to printp.209Check to see if the standard exit bin is fullp.209Check to see if the paper tray is emptyp.209Make sure the printer is connected to the networkp.209Make sure you are using a recommended USB or Ethernet cablep.209Make sure printer cables are securely connectedp.209Job takes longer than expected to printp.209Reduce the complexity of the print jobp.209Change the Page Protect setting to Offp.209Job prints from the wrong tray or on the wrong paperp.210Check the Paper Type settingp.210Incorrect or strange characters printp.210Tray linking does not workp.210Load the same size and type of paperp.210Use the same Paper Size and Paper Type settingsp.210Large jobs do not collatep.210Make sure Collate is set to Onp.210Reduce the complexity of the print jobp.210Make sure the printer has enough memoryp.211Unexpected page breaks occurp.211Solving copy problemsp.211Copier does not respondp.211Check the display for error messagesp.211Check the powerp.211Scanner unit does not closep.211Poor copy qualityp.212Check the display for error messagesp.212The toner may be lowp.212The scanner glass may be dirtyp.212The copy is too light or too darkp.212Check the quality of the original documentp.212Check the document placementp.213Unwanted toner is in the backgroundp.213Patterns (moiré) appear in the outputp.213Text is light or disappearingp.213The output appears washed out or overexposedp.213Partial document or photo copiesp.213Check the document placementp.213Check the Paper Size settingp.213Solving scanner problemsp.213Checking an unresponsive scannerp.213Scan was not successfulp.214Check the cable connectionsp.214An error may have occurred in the programp.214Scanning takes too long or freezes the computerp.214Other software programs may be interfering with scanningp.214The scan resolution may be set too highp.214Poor scanned image qualityp.214Check the display for error messagesp.214The scanner glass may be dirtyp.214Adjust the scan resolutionp.214Check the quality of the original documentp.214Check the document placementp.215Partial document or photo scansp.215Check the document placementp.215Check the paper size settingp.215Cannot scan from a computerp.215Check the display for error messagesp.215Check the powerp.215Check the cable connectionsp.215Solving fax problemsp.215Caller ID is not shownp.215Cannot send or receive a faxp.216Check the display for error messagesp.216Check the powerp.216Check the printer connectionsp.216Check the telephone wall jackp.216Review this digital phone service checklistp.216Check for a dial tonep.216Temporarily disconnect other equipmentp.217Check for jamsp.217Temporarily disable Call Waitingp.217Voice Mail service may be interfering with the fax transmissionp.217The printer memory may be fullp.217Can send but not receive faxesp.217Check to see if the paper tray is emptyp.217Check the ring count delay settingsp.217The toner may be lowp.218Can receive but not send faxesp.218Make sure the printer is in Fax modep.218Make sure the document is loaded properlyp.218Make sure the shortcut number is set up properlyp.218Received fax has poor print qualityp.218Re-send the documentp.218The toner may be lowp.218Make sure the fax transmission speed is not set too highp.218Blocking junk faxesp.219Solving option problemsp.219Option does not operate correctly or quits after it is installedp.219Reset the printerp.219Check to see if the option is connected to the printerp.219Make sure the option is installed correctlyp.219Make sure the option is selectedp.220Drawersp.220Make sure the paper is loaded correctlyp.220Reset the printerp.220Multipurpose feederp.220Check the multipurpose feederp.220Clear any jamsp.220Check the power cord connectionp.220Check the paperp.220Check the paper guidesp.220Check for service messagesp.221Memory cardp.221Solving paper feed problemsp.221Paper frequently jamsp.221Check the paperp.221Make sure there is not too much paper in the paper trayp.221Check the paper guidesp.221The paper may have absorbed moisture due to high humidityp.221Paper jam message remains after jam is clearedp.221Page that jammed does not reprint after you clear the jamp.221Solving print quality problemsp.222Blank pagesp.222Packing material may be on the print cartridgep.222The toner may be lowp.222Characters have jagged or uneven edgesp.222Clipped imagesp.223Check the guidesp.223Check the paper size settingp.223Dark linesp.223Gray backgroundp.223Check the Toner Darkness settingp.223Incorrect marginsp.224Check the paper guidesp.224Check the paper size settingp.224Light colored line, white line, or incorrectly colored linep.224A toner cartridge may be defectivep.224The imaging kit may be defectivep.224Paper curlp.225Check the Paper Type settingp.225Has the paper absorbed moisture due to high humidity?p.225Print irregularitiesp.225The paper may have absorbed moisture due to high humidityp.225Check the paper type settingp.225Check the paperp.225The toner may be lowp.225The fuser may be worn or defectivep.225Repeating defectsp.226Repeating marks occur multiple times on a pagep.226Skewed printp.226Check the paper guidesp.226Check the paperp.226Print is too lightp.226Calibrate the colorp.226Check the darkness, brightness, and contrast settingsp.227The paper may have absorbed moisture due to high humidityp.227Check the paperp.227Check the Paper Type settingp.227Make sure Color Saver is set to Offp.227A toner cartridge may be lowp.227A toner cartridge may be defectivep.227The imaging kit may be worn or defectivep.227Print is too darkp.228Calibrate the colorp.228Check the darkness, brightness, and contrast settingsp.228A toner cartridge may be defectivep.228Solid color pagesp.229Make sure the print cartridge is properly installedp.229The print cartridge may be defective or low on tonerp.229Toner fog or background shading appears on the pagep.229The imaging kit may be worn or defectivep.229Is there toner in the paper path?p.229Toner rubs offp.230Check the paper type settingp.230Check the Paper Texture settingp.230Toner specksp.230The print cartridge may be defectivep.230There is toner in the paper pathp.230Transparency print quality is poorp.231Check the transparenciesp.231Check the paper type settingp.231Uneven print densityp.231Solving color quality problemsp.232Color misregistrationp.232A toner cartridge may be defectivep.232Calibrate the colorp.232FAQ about color printingp.232Embedded Web Server does not openp.235Check the network connectionsp.235Check the network settingsp.235Contacting Customer Supportp.235Noticesp.236Product informationp.236Edition noticep.236GOVERNMENT END USERSp.236Trademarksp.237Federal Communications Commission (FCC) compliance information statementp.237Modular component noticep.237Noise emission levelsp.238Waste from Electrical and Electronic Equipment (WEEE) directivep.238Static sensitivity noticep.238ENERGY STARp.239Mercury statementp.239Temperature informationp.239Laser noticep.239Laser advisory labelp.239Power consumptionp.240Product power consumptionp.240Power Saverp.240Off modep.241Total energy usagep.241Notice to users of the US telephone network: FCC requirementsp.241Notice to users of the Canadian telephone networkp.242Notice to users of the New Zealand telephone networkp.243South Africa telecommunications noticep.243European Community (EC) directives conformityp.244Regulatory notices for wireless productsp.244Exposure to radio frequency radiationp.245Industry Canada (Canada)p.245Notice to users in the European Unionp.246STATEMENT OF LIMITED WARRANTY FOR LEXMARK LASER PRINTERS, LEXMARK LED PRINTERS, AND LEXMARK MULTIFUN ...p.248Patent acknowledgmentp.250Indexp.251
Page 257 of the Lexmark 356 user manual — Table of contents
Page 257 · click to enlarge
Page 257

Table of contents

Contentsp.2Safety informationp.10Learning about the printerp.12Finding information about the printerp.12Selecting a location for the printerp.13Printer configurationsp.15Basic functions of the scannerp.15Understanding the ADF and scanner glassp.16Understanding the printer control panelp.16Additional printer setupp.22Installing internal optionsp.22Available optionsp.22Accessing the system board to install internal optionsp.23Installing a memory cardp.25Installing a flash memory cardp.27Installing hardware optionsp.29Installing an optional tray or drawerp.29Attaching cablesp.30Verifying printer setupp.32Printing menu settings pagesp.32Printing a network setup pagep.32Setting up the printer softwarep.33Installing the printer softwarep.33Updating available options in the printer driverp.33Setting up wireless printingp.34Preparing to set up the printer on a wireless networkp.34Installing the printer on a wireless network (Windows)p.35Installing the printer on a wireless network (Macintosh)p.37Installing the printer on an Ethernet networkp.40Minimizing your printer's environmental impactp.43Saving paper and tonerp.43Using recycled paper and other office papersp.43Conserving suppliesp.44Saving energyp.45Using Eco-Modep.45Reducing printer noisep.45Adjusting Power Saverp.46Recyclingp.47Recycling Lexmark productsp.47Recycling Lexmark packagingp.47Returning Lexmark cartridges for reuse or recyclingp.47Loading paper and specialty mediap.48Linking and unlinking traysp.48Linking traysp.48Unlinking traysp.48Assigning a Custom Type namep.48Setting the Paper Size and Paper Typep.49Configuring Universal paper settingsp.49Loading the standard 250-sheet tray and optional 550-sheet trayp.50Loading the 650-sheet duo drawerp.53Using the multipurpose feederp.54Using the manual feederp.56Paper and specialty media guidep.58Paper guidelinesp.58Paper characteristicsp.58Unacceptable paperp.59Selecting paperp.59Selecting preprinted forms and letterheadp.59Storing paperp.60Supported paper sizes, types, and weightsp.60Paper sizes supported by the printerp.60Paper types supported by the printerp.61Paper types and weights supported by the printerp.62Paper capacitiesp.64Printingp.65Printing a documentp.65Printing on specialty mediap.65Tips on using letterheadp.65Tips on using transparenciesp.67Tips on using envelopesp.67Tips on using paper labelsp.68Tips on using card stockp.68Printing from a flash drivep.69Supported flash drives and file typesp.70Printing photos from a PictBridge-enabled digital camerap.71Printing information pagesp.71Printing a font sample listp.71Printing a directory listp.72Printing the print quality test pagesp.72Canceling a print jobp.72Canceling a print job from the printer control panelp.72Canceling a print job from the computerp.72Copyingp.74Making copiesp.74Making a quick copyp.74Copying using the ADFp.74Copying using the scanner glassp.75Copying photosp.75Copying on specialty mediap.75Copying to transparenciesp.75Copying to letterheadp.76Customizing copy settingsp.76Copying from one size to anotherp.76Making copies using paper from a selected trayp.77Copying on both sides of the paper (duplexing)p.77Reducing or enlarging copiesp.78Making a copy lighter or darkerp.78Adjusting copy qualityp.79Collating copiesp.79Placing separator sheets between copiesp.80Copying multiple pages onto a single sheetp.80Canceling a copy jobp.81Improving copy qualityp.81E-mailingp.82Getting ready to e-mailp.82Setting up the e-mail functionp.82Setting up the address bookp.83Creating an e-mail shortcut using the Embedded Web Serverp.83E-mailing a documentp.83Sending an e-mail using the keypadp.83Sending an e-mail using a shortcut numberp.84Sending an e-mail using the address bookp.85Canceling an e-mailp.85Faxingp.86Getting the printer ready to faxp.86Initial fax setupp.86Choosing a fax connectionp.87Connecting to an analog telephone linep.88Connecting to a DSL servicep.89Connecting to a PBX or ISDN systemp.89Connecting to a Distinctive Ring Servicep.90Connecting a telephone or answering machine to the same telephone linep.90Connecting to an adapter for your country or regionp.91Connecting to a computer with a modemp.97Setting the outgoing fax name and numberp.99Setting the date and timep.99Turning daylight saving time on or offp.99Sending a faxp.100Sending a fax using the printer control panelp.100Sending a fax using the computerp.100Creating shortcutsp.101Creating a fax destination shortcut using the Embedded Web Serverp.101Creating a fax destination shortcut using the printer control panelp.101Using shortcuts and the address bookp.102Using fax destination shortcutsp.102Using the address bookp.102Customizing fax settingsp.103Changing the fax resolutionp.103Making a fax lighter or darkerp.103Sending a fax at a scheduled timep.103Viewing a fax logp.104Canceling an outgoing faxp.104Understanding fax optionsp.105Original Sizep.105Contentp.105Sides (Duplex)p.105Resolutionp.105Darknessp.105Improving fax qualityp.106Forwarding a faxp.106Scanning to an FTP addressp.107Scanning to an FTP addressp.107Scanning to an FTP address using the keypadp.107Scanning to an FTP address using a shortcut numberp.108Creating an FTP shortcut using the Embedded Web Serverp.108Scanning to a computer or USB flash memory devicep.109Scanning to a computerp.109Scanning to a USB flash memory devicep.110Understanding scan to computer optionsp.111Sides (Duplex)p.111Darknessp.111Improving scan qualityp.111Using the Scan Center softwarep.111Understanding the Scan Center featuresp.111Using the ScanBack utilityp.112Using the ScanBack Utilityp.112Clearing jamsp.113Avoiding jamsp.113Understanding jam numbers and locationsp.114200 paper jamp.115201 paper jamp.115202 paper jamp.116230 paper jamp.118235 paper jamp.118242 and 243 paper jamsp.118250 paper jamp.119290 paper jamp.119Understanding printer menusp.121Menus listp.121Supplies menup.122Paper menup.122Default Source menup.122Size/Type menup.123Paper Texture menup.125Paper Weight menup.127Paper Loading menup.128Custom Types menup.129Custom Scan Sizes menup.130Universal Setup menup.130Reports menup.131Reports menup.131Network/Portsp.132Active NIC menup.132Network menup.132Wireless menup.134USB menup.134Settings menup.136General Settings menup.136Copy Settings menup.139Fax Settings menup.141Flash Drive menup.147Flash Drive menup.147Print Settingsp.150Setup menup.150Finishing menup.150Quality menup.152Utilities menup.154PDF menup.155PostScript menup.155PCL Emul menup.155Image menup.158PictBridge menup.158Set Date and Timep.159Understanding printer messagesp.162List of status and error messagesp.162Access USB after scanp.162Access USB nowp.162Busyp.162Calibratingp.162Call completep.162Cancel not availablep.162Cancelingp.162Check Config IDp.162Clock batteryp.162Close doorp.163<color> Lowp.163Dialingp.163DO NOT TOUCHp.163Fax completep.163Fax failedp.163Flushing bufferp.163File corruptp.163Hex Tracep.163Imaging Kitp.163Incoming callp.164Insert Tray <x>p.164Invalid Engine Codep.164Invalid Network Codep.164LADP connection errorp.164Line busyp.164Load <src> with <x>p.164Load single sheet feeder with <x>p.164Maintenancep.165Memory full, cannot send faxesp.165Menus disabledp.165No analog phone linep.165No answerp.165No dial tonep.165No recognized file typesp.165PC Kit Life Warningp.165Phone in Usep.166Picture too largep.166Power Saverp.166Printing errorp.166Programming Codep.166Reading datap.166Reading error (Remove drive)p.166Readyp.166Receiving pXXp.167Reload printed pages in Tray <x>p.167Remote Management Activep.167Remove originals from the scanner ADFp.167Remove packaging materialp.167Remove paper from standard output binp.167Replace <color> cartridgep.167Replace PC Kitp.167Scan Document Too Longp.167Scan to USB failedp.167Scanner ADF Cover Openp.168Sending pXXp.168Standard Exit Bin Fullp.168Tray <x> Emptyp.168Tray <x> Lowp.168Tray <x> Missingp.168Unsupported USB device, please removep.168Unsupported USB hub, please removep.168Unsupported Modep.168USB drive disabledp.169Use camera controls to printp.169Waitingp.169Waiting, too many eventsp.16930.yy <color> cartridge missingp.16931.yy Defective <color> Cartridgep.16931 Defective Imaging Kitp.16932.yy Replace Unsupported <color> Cartridgep.16934 Short paperp.16935 Insufficient memory to support Resource Save featurep.17037 Insufficient memory to collate jobp.17038 Memory Fullp.17039 Complex page, some data may not have printedp.17040 <color> Invalid refill, change cartridgep.17050 PPDS Font Errorp.17051 Defective flash detectedp.17052 Not enough free space in flash memory for resourcesp.17153 Unformatted flash detectedp.17154 Network <x> Software Errorp.17156 Standard USB Port Disabledp.17158 Too many flash options installedp.17158 Too many trays attachedp.17258 Input config errorp.17259 Incompatible tray <x>p.17282 Replace waste toner boxp.17282.yy Waste toner box missingp.17288.yy <color> Cartridge is lowp.17288.yy Replace <color> Cartridgep.172150 displayedp.173200.yy Paper jam <area name>p.173201.yy Paper jam <area name>p.173202.yy Paper jam <area name>p.173230.yy Paper jam <area name>p.173235 Paper Jam Check Duplexp.17324x Paper Jam Check Tray <x>p.174250.yy Paper jam <area name>p.174290–292 ADF Scanning Jamsp.174293 Paper Missingp.174293.02 Flatbed Cover Openp.174294 ADF Jamp.175840.01 Scanner Disabledp.175840.02 Scanner Auto Disabledp.175940.01p.175941.01p.175942.01p.175943.01p.176940.02p.176941.02p.176942.02p.176943.02p.176900–999 Service <message>p.176Maintaining the printerp.177Storing suppliesp.177Checking the status of suppliesp.177Checking the status of supplies from the printer control panelp.177Checking the status of supplies from a network computerp.177Ordering suppliesp.178Ordering toner cartridgesp.178Ordering imaging kitsp.179Ordering a waste toner bottlep.179Replacing suppliesp.180Replacing the waste toner bottlep.180Replacing a black imaging kitp.183Replacing a black and color imaging kitp.189Replacing a toner cartridgep.195Replacing a developer unitp.197Cleaning the exterior of the printerp.203Cleaning the scanner glassp.204Moving the printerp.204Before moving the printerp.204Moving the printer to another locationp.205Shipping the printerp.205Administrative supportp.206Finding advanced networking and administrator informationp.206Restoring the factory default settingsp.206Using the Embedded Web Serverp.206Setting up e-mail alertsp.207Viewing reportsp.207Troubleshootingp.208Solving basic printer problemsp.208Solving printing problemsp.208Multiple-language PDFs do not printp.208Printer control panel display is blank or displays only diamondsp.208Error message about reading USB drive appearsp.208Jobs do not printp.209Make sure the printer is ready to printp.209Check to see if the standard exit bin is fullp.209Check to see if the paper tray is emptyp.209Make sure the printer is connected to the networkp.209Make sure you are using a recommended USB or Ethernet cablep.209Make sure printer cables are securely connectedp.209Job takes longer than expected to printp.209Reduce the complexity of the print jobp.209Change the Page Protect setting to Offp.209Job prints from the wrong tray or on the wrong paperp.210Check the Paper Type settingp.210Incorrect or strange characters printp.210Tray linking does not workp.210Load the same size and type of paperp.210Use the same Paper Size and Paper Type settingsp.210Large jobs do not collatep.210Make sure Collate is set to Onp.210Reduce the complexity of the print jobp.210Make sure the printer has enough memoryp.211Unexpected page breaks occurp.211Solving copy problemsp.211Copier does not respondp.211Check the display for error messagesp.211Check the powerp.211Scanner unit does not closep.211Poor copy qualityp.212Check the display for error messagesp.212The toner may be lowp.212The scanner glass may be dirtyp.212The copy is too light or too darkp.212Check the quality of the original documentp.212Check the document placementp.213Unwanted toner is in the backgroundp.213Patterns (moiré) appear in the outputp.213Text is light or disappearingp.213The output appears washed out or overexposedp.213Partial document or photo copiesp.213Check the document placementp.213Check the Paper Size settingp.213Solving scanner problemsp.213Checking an unresponsive scannerp.213Scan was not successfulp.214Check the cable connectionsp.214An error may have occurred in the programp.214Scanning takes too long or freezes the computerp.214Other software programs may be interfering with scanningp.214The scan resolution may be set too highp.214Poor scanned image qualityp.214Check the display for error messagesp.214The scanner glass may be dirtyp.214Adjust the scan resolutionp.214Check the quality of the original documentp.214Check the document placementp.215Partial document or photo scansp.215Check the document placementp.215Check the paper size settingp.215Cannot scan from a computerp.215Check the display for error messagesp.215Check the powerp.215Check the cable connectionsp.215Solving fax problemsp.215Caller ID is not shownp.215Cannot send or receive a faxp.216Check the display for error messagesp.216Check the powerp.216Check the printer connectionsp.216Check the telephone wall jackp.216Review this digital phone service checklistp.216Check for a dial tonep.216Temporarily disconnect other equipmentp.217Check for jamsp.217Temporarily disable Call Waitingp.217Voice Mail service may be interfering with the fax transmissionp.217The printer memory may be fullp.217Can send but not receive faxesp.217Check to see if the paper tray is emptyp.217Check the ring count delay settingsp.217The toner may be lowp.218Can receive but not send faxesp.218Make sure the printer is in Fax modep.218Make sure the document is loaded properlyp.218Make sure the shortcut number is set up properlyp.218Received fax has poor print qualityp.218Re-send the documentp.218The toner may be lowp.218Make sure the fax transmission speed is not set too highp.218Blocking junk faxesp.219Solving option problemsp.219Option does not operate correctly or quits after it is installedp.219Reset the printerp.219Check to see if the option is connected to the printerp.219Make sure the option is installed correctlyp.219Make sure the option is selectedp.220Drawersp.220Make sure the paper is loaded correctlyp.220Reset the printerp.220Multipurpose feederp.220Check the multipurpose feederp.220Clear any jamsp.220Check the power cord connectionp.220Check the paperp.220Check the paper guidesp.220Check for service messagesp.221Memory cardp.221Solving paper feed problemsp.221Paper frequently jamsp.221Check the paperp.221Make sure there is not too much paper in the paper trayp.221Check the paper guidesp.221The paper may have absorbed moisture due to high humidityp.221Paper jam message remains after jam is clearedp.221Page that jammed does not reprint after you clear the jamp.221Solving print quality problemsp.222Blank pagesp.222Packing material may be on the print cartridgep.222The toner may be lowp.222Characters have jagged or uneven edgesp.222Clipped imagesp.223Check the guidesp.223Check the paper size settingp.223Dark linesp.223Gray backgroundp.223Check the Toner Darkness settingp.223Incorrect marginsp.224Check the paper guidesp.224Check the paper size settingp.224Light colored line, white line, or incorrectly colored linep.224A toner cartridge may be defectivep.224The imaging kit may be defectivep.224Paper curlp.225Check the Paper Type settingp.225Has the paper absorbed moisture due to high humidity?p.225Print irregularitiesp.225The paper may have absorbed moisture due to high humidityp.225Check the paper type settingp.225Check the paperp.225The toner may be lowp.225The fuser may be worn or defectivep.225Repeating defectsp.226Repeating marks occur multiple times on a pagep.226Skewed printp.226Check the paper guidesp.226Check the paperp.226Print is too lightp.226Calibrate the colorp.226Check the darkness, brightness, and contrast settingsp.227The paper may have absorbed moisture due to high humidityp.227Check the paperp.227Check the Paper Type settingp.227Make sure Color Saver is set to Offp.227A toner cartridge may be lowp.227A toner cartridge may be defectivep.227The imaging kit may be worn or defectivep.227Print is too darkp.228Calibrate the colorp.228Check the darkness, brightness, and contrast settingsp.228A toner cartridge may be defectivep.228Solid color pagesp.229Make sure the print cartridge is properly installedp.229The print cartridge may be defective or low on tonerp.229Toner fog or background shading appears on the pagep.229The imaging kit may be worn or defectivep.229Is there toner in the paper path?p.229Toner rubs offp.230Check the paper type settingp.230Check the Paper Texture settingp.230Toner specksp.230The print cartridge may be defectivep.230There is toner in the paper pathp.230Transparency print quality is poorp.231Check the transparenciesp.231Check the paper type settingp.231Uneven print densityp.231Solving color quality problemsp.232Color misregistrationp.232A toner cartridge may be defectivep.232Calibrate the colorp.232FAQ about color printingp.232Embedded Web Server does not openp.235Check the network connectionsp.235Check the network settingsp.235Contacting Customer Supportp.235Noticesp.236Product informationp.236Edition noticep.236GOVERNMENT END USERSp.236Trademarksp.237Federal Communications Commission (FCC) compliance information statementp.237Modular component noticep.237Noise emission levelsp.238Waste from Electrical and Electronic Equipment (WEEE) directivep.238Static sensitivity noticep.238ENERGY STARp.239Mercury statementp.239Temperature informationp.239Laser noticep.239Laser advisory labelp.239Power consumptionp.240Product power consumptionp.240Power Saverp.240Off modep.241Total energy usagep.241Notice to users of the US telephone network: FCC requirementsp.241Notice to users of the Canadian telephone networkp.242Notice to users of the New Zealand telephone networkp.243South Africa telecommunications noticep.243European Community (EC) directives conformityp.244Regulatory notices for wireless productsp.244Exposure to radio frequency radiationp.245Industry Canada (Canada)p.245Notice to users in the European Unionp.246STATEMENT OF LIMITED WARRANTY FOR LEXMARK LASER PRINTERS, LEXMARK LED PRINTERS, AND LEXMARK MULTIFUN ...p.248Patent acknowledgmentp.250Indexp.251
Sources

References & links

Pages referenced in this manual — manufacturer, support and downloads.

Ask about the Lexmark 356

Owners and our team usually reply within a day — and your question helps the next person too.

Add your email to get notified when it’s answered — no spam, ever.

0 questions
No questions yet about the Lexmark 356

Be the first to ask — other owners or our team will answer.

Original document

Lexmark 356 manual PDF

257 pages·7.1 MB·Printer·PDF
Click any page above to open it here
Page 1 / …
100%
Loading pages…