Instruction/ maintenance manual of the product CD625 Lenoxx Electronics
Go to page of 14
IB-CD625(CDR92C-0L8)-WM-E-121803 AM/FM STEREO RADIO PROGRAMMABLE CD PLA YER MODEL CD-625 OPERA TING INSTRUCTIONS PLEASE READ CAREFULL Y BEFORE USE BUIL T -IN AM/FM RADIO RECEIVER PLA YS MUSIC .
IB-CD625(CDR92C-0L8)-WM-E-121803 LOCA TION OF CONTROLS 1. CD PROGRAM BUTTON ( ) 2. CD BACKWARD SKIP/SEARCH BUTTON ( ) 3. CD STOP AND POWER OFF BUTTON ( ) 4. CD DOOR 5. AM/FM DIAL LENS 6. CD DOOR OPEN BUTTON 7 . AM/FM TUNING CONTROL 8. POWER ON INDICA TOR 9.
IB-CD625(CDR92C-0L8)-WM-E-121803 POWER SOURCES Using with Batteries TIPS ON BA TTERY USE Reversing polarities will damage the batteries and possibly this set. Be sure to follow polarity ( + and - ) as indicated. Do not mix different types together (Alkaline, Carbon-Zinc, Nickel-Cadmium etc.
IB-CD625(CDR92C-0L8)-WM-E-121803 DISC PLA YING 5 Adjust the volume. 2 Load the disc. 3 Connect the headphones. 4 Press the PLA Y/P AUSE button ( ), the POWER ON indicator will light up.
IB-CD625(CDR92C-0L8)-WM-E-121803 OTHER OPERA TIONS Operation Press Display window shows T o pause play T o release pause and resume play TRACK NUMBER CURRENTLY PLAYING ELAPSED TIME FLASHES TRACK NUMBE.
IB-CD625(CDR92C-0L8)-WM-E-121803 REPEA T , INTRO AND RANDOM PLA Y Y ou may have repeat, intro or random play using the REPEA T button. Press the REPEA T button several times, and the display will show the followings in turn: SINGLE TRACK REPEA T Plays one song over and over till you press STOP .
IB-CD625(CDR92C-0L8)-WM-E-121803 PROGRAMMED PLA Y During programming, the word PROGRAM flashes in the display . T o program songs to play in your preferred order , follow steps below: 1. Press the PROGRAM button once. The word PROGRAM and will flash in the display .
IB-CD625(CDR92C-0L8)-WM-E-121803 RADIO OPERA TION 4 Adjust the volume. 1 Slide the CD/OFF/RADIO FUNCTION switch to RADIO position, the POWER ON indicator will be turned on. 2 Select AM, FM or FM STEREO with the AM/FM/FM STEREO BAND switch. 3 Rotate the TUNING CONTROL to select your favorite radio station.
IB-CD625(CDR92C-0L8)-WM-E-121803 Cleaning the cabinet Wipe with a soft cloth. If the cabinet is very dirty , dampen (not dripping wet) the cloth with a weak solution of soapy water , and then wipe clean. Cleaning the lens A dirty lens will cause sound skipping.
IB-CD625(CDR92C-0L8)-WM-E-121803 Do not take the set apart. The laser beam used in the set may harm your eyes. Refer servicing to qualified service personnel only . Do not insert pins or coins, clips, or any objects inside the set. This set is equipped with a safety device which automatically turns the laser beam off when the disc door is opened.
IB-CD625(CDR92C-0L8)-WM-E-121803 Since the CD circuitry may cause interference to other radios nearby , switch this set off when not in use or move it away from the affected radios.
IB-CD625(CDR92C-0L8)-WM-E-121803 TROUBLE SHOOTING GUIDE Symptoms Causes Solutions Tracks do not change or set does not play normally . Batteries are weak (they may test OK on tester but they are weak for CD operation). Replace both batteries with fresh alkaline batteries.
IB-CD625(CDR92C-0L8)-WM-E-121803 TECHNICAL SPECIFICA TIONS 50Hz - 15kHz +1/-2dB 44.1kHz 1-bit CIRC Optical 3-beam semiconductor laser (780 nm wavelength) Laser diode material GaAIAs Laser output less than 44.6 µ W General Maximum output (stereo headphones) .
IB-CD625(CDR92C-0L8)-WM-E-121803 13 © 2004 LENOXX ELECTRONICS CORP . 2 GERMAK DRIVE CARTERET , N.J. 07008 MADE & PRINTED IN CHINA LIMITED W ARRANTY We warrant this product to be free from defects.
An important point after buying a device Lenoxx Electronics CD625 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Lenoxx Electronics CD625 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Lenoxx Electronics CD625 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Lenoxx Electronics CD625 you will learn all the available features of the product, as well as information on its operation. The information that you get Lenoxx Electronics CD625 will certainly help you make a decision on the purchase.
If you already are a holder of Lenoxx Electronics CD625, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Lenoxx Electronics CD625.
However, one of the most important roles played by the user manual is to help in solving problems with Lenoxx Electronics CD625. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Lenoxx Electronics CD625 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
