Instruction/ maintenance manual of the product CD-50 Lenoxx Electronics
Go to page of 14
PROGRAMMABLE COMP ACT DISC PLA YER ® MODEL CD-50 OPERA TING INSTRUCTIONS PLEASE READ CAREFULL Y BEFORE USE PLA YS ALL MUSIC COMP ACT DISCS 6 DIGIT LCD VISUAL DISPLA Y TRACK REPEA T & DISC REPEA T DELUXE STEREO HEADPHONES INCLUDED USES 4 SIZE AA BA TTERIES (NOT INCLUDED) CD-50(70A-0A9)121000 NL v .
LOCA TION OF CONTROLS 1. PHONES JACK (headphone jack) 2. CD DOOR CLOSE AREA 3. VOLUME CONTROL 4. CD DOOR OPEN BUTTON 5. REPEA T BUTTON 6. BACKWARD SKIP/SEARCH BUTTON ( ) 7. FORWARD SKIP/SEARCH BUTTON ( ) 8. LCD VISUAL DISPLA Y 9. PLA Y/P AUSE AND POWER ON BUTTON 1 0 .
POWER SOURCES Using with batteries Tips on battery use Reversing polarities will damage the batteries and possibly your set. Be sure to follow polarity ( + and - ) as indicated. Do not mix different types together (Alkaline, Carbon-Zinc, Nickel-Cadmium etc.
DISC PLA YING 4 Adjust the volume. 1 Load the disc. 2 Connect the headphones. 3 Press the PLA Y/P AUSE button ( ). Push here Disc Label side up Press to open T o PHONES Stereo headphones PLA Y/P AUSE .
Other operations Operation Press Display window shows T o pause play T o release pause and resume play TRACK NUMBER CURRENTLY PLAYING PLAYING TIME FLASHES TRACK NUMBER CURRENTLY PLAYING PLAYING TIME A.
SINGLE TRACK REPEA T Plays one song over and over till you press STOP . During play , select the song you want to repeat with either of the SKIP buttons ( or ), then press the REPEA T button once, the symbol REPEA T 1 appears in the display . The song currently playing will repeat over and over , until you press STOP .
PROGRAMMED PLA Y The tracks (songs) on the disc can be programmed (arranged in advance) to play in any order you prefer (up to 21 tracks can be programmed). Programming Example: Program Number 1 2 3 4 5 6 7 8 Track Number (song number) 3 5 8 1 2 4 1 1 etc.
Cleaning the cabinet Wipe with a soft cloth. If the cabinet is very dirty , dampen (not dripping wet) the cloth with a weak solution of soapy water , and then wipe clean. Cleaning the lens A dirty lens will cause sound skipping. If the lens is very dirty , the player may not work.
SAFETY PRECAUTIONS Do not take the set apart. The laser beam used in the set may harm your eyes. Refer servicing to qualified service personnel only . Do not insert pins or coins, clips, or any objects inside the set. This set is equipped with a safety device which automatically turns the laser beam off when the disc door is opened.
IMPORT ANT INFORMA TION REQUIRED BY THE FCC Since the CD circuitry may cause interference to other radios nearby , switch this set off when not in use or move it away from the affected radios.
TROUBLE SHOOTING GUIDE Symptoms Causes Solutions Tracks do not change or set does not play normally . Batteries are weak (they may test OK on tester but they are weak for CD operation). Replace all the 4 batteries with fresh alkaline batteries. Battery life with fresh batteries is about 16 hours (rechargeable batteries have 1/2 of that life).
TECHNICAL SPECIFICA TIONS CD PLA YER SECTION Frequency response .............................. Wow and flutter ...................................... Sampling frequency ................................ D/A converter ...................................
QUICK INSTRUCTIONS MODEL CD-50 POWERING UP Power your CD player by connecting an optional AC ADAPTOR or by inserting 4 size AA fresh alkaline batteries. BA TTERY OPERA TION 1. Open the BA TTERY DOOR. 2. Insert 4 size AA fresh alkaline batteries as shown.
QUICK INSTRUCTIONS BASIC FEA TURES P AUSE Pressing PLA Y/P AUSE button while a disc is playing will pause play (the playing time of the current track will flash ). Press PLA Y/P AUSE again to continue play . STOP or POWER OFF Press the STOP button once to stop play , and the set will turn itself off automatically after 30 seconds.
An important point after buying a device Lenoxx Electronics CD-50 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Lenoxx Electronics CD-50 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Lenoxx Electronics CD-50 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Lenoxx Electronics CD-50 you will learn all the available features of the product, as well as information on its operation. The information that you get Lenoxx Electronics CD-50 will certainly help you make a decision on the purchase.
If you already are a holder of Lenoxx Electronics CD-50, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Lenoxx Electronics CD-50.
However, one of the most important roles played by the user manual is to help in solving problems with Lenoxx Electronics CD-50. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Lenoxx Electronics CD-50 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
