EN
Lenoxx Electronics logo
Official user manual

Lenoxx Electronics CD109

15 pages·932 KB·CD Player·PDF·ENDEFRITNLJA
Lenoxx Electronics CD109
Table of Contents 63 sections COMPACT DISC PLAYER · WITH AM/FM RADIO · MODEL CD-109 OPERATING INSTRUCTIONS · PLEASE READ CAREFULLY BEFORE USE · … ShowHide
COMPACT DISC PLAYERp.1WITH AM/FM RADIOp.1MODEL CD-109 OPERATING INSTRUCTIONSp.1PLEASE READ CAREFULLY BEFORE USEp.1WARNINGp.2RISK OF ELECTRIC SHOCKp.2DO NOT OPENp.2IMPORTANT SAFETY INSTRUCTIONSp.2ADDITIONAL SAFETY INSTRUCTIONSp.3BATTERY SAFETY INSTRUCTIONSp.4SAVE THESE INSTRUCTIONSp.4CHOOSING THE POWER SOURCESp.5• Replace the batteriesp.51. Connecting the AC power cordp.5PLAYING A CDp.6USE THESE BUTTONS FOR ADDITIONAL OPERATIONSp.7OPEN THE CD DOORp.7BY LIFTING HEREp.7PHONESp.7JACKp.7BACKWARD FORWARDp.7TIPp.7STOP PLAY/PAUSEp.7STOPp.7PLAY/PAUSEp.7FORWARDSp.7BACKWARDSp.7PLAYING CD TRACKS REPEATEDLY (REPEAT PLAY)p.8PLAY/PROGRAM LAMP REPEATp.8LAMPp.8FUNCTIONp.8SWITCHp.8SELECTING YOUR OWN MUSIC PLAYING ORDER (Programmed Play)p.9PLAY/PROGRAM LAMPp.9PROGRAM/REPEATp.9BUTTONp.9PLAY/ PROGRAMp.9REPEATp.9Random Playp.9LISTENING TO THE RADIOp.101&2p.10PRECAUTIONS On Safety • As the laser beam used in the CDp.12On Power Sources • For battery operation, use 6 size “C”p.12On Operation • If the player is brought directly from ap.12On Placement • Do not leave the player in a locationp.12or unstable place. • Do not place anything within 1 inch ofp.12• This CD player is designed to bep.12MAINTENANCE Cleaning the Lensp.13• Do not use solvents such as benzene,p.13• Do not expose the CD to directp.13• Do not stick paper or stickers on thep.13TROUBLE SHOOTINGp.14Problem Remedyp.14outlet securely. • Make sure the batteries are insertedp.14General CD player Radiop.14• Make sure the FUNCTION switch is atp.14• Make sure that the CD compartment isp.14position. • Clean the CD, or replace it if the CD isp.14badly damaged. • Place the player in a location free fromp.14SPECIFICATIONp.15General Descriptionp.15CD Section Plays disc type: Any normal CD used in portable playersp.15Radio Section Frequency range: FM: 88 - 108 MHzp.15
Page 1 of the Lenoxx Electronics CD109 user manual — PLEASE READ CAREFULLY BEFORE USE
Page 1 · click to enlarge
Page 1

COMPACT DISC PLAYER

WITH AM/FM RADIO

MODEL CD-109 OPERATING INSTRUCTIONS

Lenoxx Electronics CD109 — COMPACT DISC PLAYER diagram (page 1)
Fig. 1

• PLAYS MUSIC COMPACT DISCS • FULLY PROGRAMMABLE CD PLAYER WITH REPEAT PLAY • RECEIVES AM/FM BROADCASTS • POWER LED INDICATOR • 2 WAY POWER - AC/DC • REQUIRES 6 SIZE “C” BATTERIES (not included)

PLEASE READ CAREFULLY BEFORE USE

Page 2 of the Lenoxx Electronics CD109 user manual — IMPORTANT SAFETY INSTRUCTIONS
Page 2 · click to enlarge
Page 2

WARNING

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THE PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

WARNING

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings, install in accordance with the manufacturer’s

instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other

apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug

has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. Only use attachments/accessories specified by the manufacturer. 12. Unplug this apparatus during lightning storms or when unused for long periods of time. 13. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally or has been dropped. 14. This appliance shall not be exposed to dripping or splashing water and that no object filled with liquid such as vases shall be placed on the apparatus.

Page 3 of the Lenoxx Electronics CD109 user manual — ADDITIONAL SAFETY INSTRUCTIONS
Page 3 · click to enlarge
Page 3

ADDITIONAL SAFETY INSTRUCTIONS

1. Power Sources - The appliance should be connected to a power supply only of the type

described in the operating instructions or as marked on the appliance. 2. Wall or Ceiling Mounting - The appliance should not be mounted to a wall or ceiling. 3. Object and Liquid Entry - Care should be taken so that objects do not fall and liquids

are not spilled into the enclosure through openings. 4. Servicing - The user should not attempt to service the appliance beyond that described in

the operating instructions. All other servicing should be referred to qualified service personnel.

Do not apply oil or petroleum products or solvents to any part of this set.

Page 4 of the Lenoxx Electronics CD109 user manual — SAVE THESE INSTRUCTIONS
Page 4 · click to enlarge
Page 4

BATTERY SAFETY INSTRUCTIONS

SET, READ AND FOLLOW THESE INSTRUCTIONS.

1. Use only the type and size of batteries mentioned in the operating instructions booklet (batteries are not included with this set, please buy the proper batteries). 2. Do not dispose the batteries into a fire. The cells may explode. Check with local codes for possible special disposal instructions. 3. Do not open or mutilate the batteries. Released electrolyte is corrosive and may cause damage to the eyes or skin. It may be toxic if swallowed. 4. Be careful when handling batteries in order not to short the battery with conducting materials such as rings, bracelets and keys. The battery or conductor may over heat and cause burns. 5. Do not attempt to recharge non-rechargeable batteries. The batteries may leak corrosive electrolyte or explode. 6. Do not attempt to rejuvenate the batteries identified for use with this product by heating them. Sudden release of the battery electrolyte may cause burns or irritation to eyes or skin. 7. All batteries should be replaced at the same time. Mixing fresh and discharged batteries could increase internal cell pressure and rupture the batteries. 8. When inserting batteries into this product, the proper polarity ( and ) or direction must be observed. Reverse insertion of some or all of the batteries may result in battery electrolyte leakage or explosion. 9. Remove the batteries from this product if the product will not be used for a long period of time (several months or more) since during the period the batteries could leak, damaging the product. 10. Discard weak or dead batteries as soon as possible since they are more likely to leak in the product. Batteries should be replaced (depending on the product) when the display gets dim or if the Low Battery Indicator shows or if the sound gets distorted. 11. Do not store this product in high temperature areas. Batteries that are stored in a freezer or refrigerator for the purpose of extending shelf life should be protected from condensation during storage and defrosting. Batteries should be stabilized at room temperature prior to use after cold storage. 12. If this product does not operate normally, see TROUBLE SHOOTING in this instruction manual. If you can’t resolve the problem, or if the product is damaged, refer to the LENOXX WARRANTY INFORMATION. Opening or removing covers may expose you to dangerous voltages or other risks. Incorrect reassembly can cause electric shock when the appliance is subsequently used. 13. If liquid leaks from the batteries, carefully wipe this liquid. Do not allow it to touch your skin, and discard the leaking batteries. 14. Do not mix batteries (OLD and NEW or CARBON and ALKALINE, etc.). 15. The use of rechargeable batteries is not recommended for this set because their voltage and life is lower than standard batteries. 16. Installation of batteries should be done by an adult only.

SAVE THESE INSTRUCTIONS

Page 5 of the Lenoxx Electronics CD109 user manual — • Replace the batteries
Page 5 · click to enlarge
Page 5

CHOOSING THE POWER SOURCES

You can use the AC power or batteries as a power source.

To a wall outlet

AC SOCKET Battery compartment

• Replace the batteries

1. Connecting the AC power cord

when the POWER lamp dims or when the player stops operating. Replace all the batteries with new ones. Before you replace the batteries, be sure to take out the CD from the player and remember to check the Battery Safety Instructions on Page 3. • If the CD does not play

Insert one end of the supplied AC power cord into the socket located at the rear of the player, and the other end to the wall outlet. 2. Using the player on batteries

Insert 6 size “C” batteries (not supplied) into the battery compartment.

To use the player on batteries, disconnect and remove the AC power cord from the player.

on batteries, this means the batteries are almost used up. But the radio may continue to play on these weak batteries because it uses less power than the CD player.

Insert new batteries as shown.

Page 6 of the Lenoxx Electronics CD109 user manual — PLAYING A CD
Page 6 · click to enlarge
Page 6

PLAYING A CD

Lenoxx Electronics CD109 — PLAYING A CD diagram (page 6)
Fig. 2

Connect the supplied AC power cord or batteries (see page 4).

1 Slide the FUNCTION switch (at the right side of the set) to CD position, the POWER lamp will turn on.

Lift the right corner of the CD DOOR to open it and place a CD in the CD compartment. The label side of the CD should face upward.

3 Close the CD DOOR by pushing it down. The display will show the total tracks of that CD.

Press the CD PLAY button. The PLAY/ PROGRAM lamp will be steady on, the player will play all the tracks in order once.

Page 7 of the Lenoxx Electronics CD109 user manual — TIP
Page 7 · click to enlarge
Page 7

USE THESE BUTTONS FOR ADDITIONAL OPERATIONS

OPEN THE CD DOOR

BY LIFTING HERE

VOLUME CONTROL (at the left side of the set)

FUNCTION SWITCH (at the right side of the set)

PHONES

JACK

BACKWARD FORWARD

TIP

STOP PLAY/PAUSE

When CD play is paused, the track number will flash and no music will play.

To Press or Adjust

Adjust the volume VOLUME control

STOP

To resume play, press the PAUSE button again, the track number will stop flashing and music will play.

PLAY/PAUSE

Pause playback The track number will flash during pause. Press again to resume play after pause.

Go to the next track

FORWARDS

Go back to the previous track

TIP

BACKWARDS

If you bump the set during CD play, the music will stop or skip for a few seconds. This is normal for this type of player.

BACKWARDS or FORWARDS , Press and hold down while playing until you find the point.

Locate a point in a song

Insert your headphones (not included) plug into the PHONES jack (at the left side of the set).

To enjoy the music without disturbing others

Remove the CD Lift the right corner of the CD DOOR (press STOP first).

Slide the FUNCTION switch (at the right side of the set) to OFF position.

Turn off the power

Stop playback

Page 8 of the Lenoxx Electronics CD109 user manual — FUNCTION
Page 8 · click to enlarge
Page 8

PLAYING CD TRACKS REPEATEDLY (REPEAT PLAY)

You can play CD tracks over and over in normal or programmed play modes (see page 8).

PLAY/PROGRAM LAMP REPEAT

LAMP

Lenoxx Electronics CD109 — PLAY/PROGRAM LAMP REPEAT diagram (page 8)
Fig. 3

FUNCTION

SWITCH

PLAY/PAUSE

1. Slide the FUNCTION switch (at the right side of the set) to the CD position. 2. Select the track by pressing SKIP/SEARCH BACKWARD or FORWARD , and then press . 3. Press the CD PROGRAM/REPEAT button.
Lenoxx Electronics CD109 — FUNCTION diagram (page 8)
Fig. 4

Press the PROGRAM/REPEAT button once, the REPEAT lamp will be steady on.

Press the PROGRAM/REPEAT button twice, the REPEAT lamp will be flashing.

During programmed play, press the REPEAT button twice, both the REPEAT and PLAY/ PROGRAM lamps will be flashing.

To cancel Repeat Play Press the PROGRAM/REPEAT button until the REPEAT lamp goes off.

To repeat Press · Display shows

Page 9 of the Lenoxx Electronics CD109 user manual — Random Play
Page 9 · click to enlarge
Page 9

SELECTING YOUR OWN MUSIC PLAYING ORDER (Programmed Play)

You can make a program of up to 16 tracks in the order you want them to be played.

Lenoxx Electronics CD109 — SELECTING YOUR OWN MUSIC PLAYING ORDER (Programmed Play) diagram (page 9)
Fig. 5 · SELECTING YOUR OWN MUSIC PLAYING ORDER (Programmed P…

PLAY/PROGRAM LAMP

PROGRAM/REPEAT

BUTTON

1. Slide the FUNCTION switch to CD position. Make sure the CD is stopped. 2. Press the PROGRAM/REPEAT button. The letters “P0” will show and the PLAY/PROG. lamp will flash. 3. Press or to select the tracks you want to program in the order you want. 4. Press the PROGRAM/REPEAT button to confirm. The letters “P1” will show and the PLAY/PROGRAM lamp will flash. 5. Repeat steps 3 and 4. You can program up to 16 tracks (the display will show “Pa”, “Pb” ... “Pf” for program#11-16). 6. Press to start programmed play. The PLAY/ PROGRAM lamp will be flash.

PLAY/ PROGRAM

REPEAT

PLAY/ PROGRAM

REPEAT

To change the current program Just create a new program following the programming procedure.

To cancel Programmed Play Slide the FUNCTION switch to OFF position.

Random Play

To play the songs in random order Press the RANDOM button, and the display will show some moving symbols like “ ” every 5 second.

Press to skip to next random song.

To resume normal play Press the RANDOM button again.

Page 10 of the Lenoxx Electronics CD109 user manual — 1&2
Page 10 · click to enlarge
Page 10

LISTENING TO THE RADIO

Lenoxx Electronics CD109 — LISTENING TO THE RADIO diagram (page 10)
Fig. 6

1&2

Connect the supplied AC power cord or batteries (see page 4).

Lenoxx Electronics CD109 — 1&2 diagram (page 10)
Fig. 7

Slide the FUNCTION switch (at the right side of the set) to RADIO position, the POWER lamp will turn on.

Slide the BAND switch (at the right side of the set) to the proper band position (AM or FM) that you want.

Tune into the station you prefer using the TUNING control. Adjust for the clearest sound.

Page 11 of the Lenoxx Electronics CD109 user manual — TIP
Page 11 · click to enlarge
Page 11
Lenoxx Electronics CD109 — LISTENING TO THE RADIO diagram (page 11)
Fig. 8

TIP

  • Next time you want to listen to the radio, just slide the FUNCTION switch to RADIO position. The player automatically starts playing the previously tuned station.

Adjust the volume VOLUME control (at the left side of the set)

Slide the FUNCTION switch (at the right side of the set) to OFF position

To improve broadcast reception Change position of the antenna for FM. Move the set itself for AM.

Page 12 of the Lenoxx Electronics CD109 user manual — • This CD player is designed to be
Page 12 · click to enlarge
Page 12

PRECAUTIONS On Safety • As the laser beam used in the CD

On Power Sources • For battery operation, use 6 size “C”

player section may be harmful to the eyes, do not attempt to disassemble the cabinet. Refer servicing to qualified personnel only. • Should any solid object or liquid fall

batteries. We recommend alkaline batteries for longer life. • When the batteries will not be used

for a few weeks or more, remove them to avoid damage that can be caused by battery leakage or corrosion.

into the player, unplug the player, and have it checked by qualified personnel before operating it any further.

On Operation • If the player is brought directly from a

On Placement • Do not leave the player in a location

near a heat source, or in a place subject to direct sunlight, excessive dust or mechanical shock. • Do not place the player on an inclined

cold to a warm location, or is placed in a very damp room, moisture may condense on the lens inside the CD player section. Should this occur, the player will not operate properly. In this case, remove the CD and wait about an hour for the moisture to evaporate.

or unstable place. • Do not place anything within 1 inch of

the back of the cabinet. The ventilation holes must not be covered for the player to operate properly and prolong the life of its components. • If the player is left in a car parked in

• This CD player is designed to be

played on a stable no vibration position. If you bump the set during CD play, the music will stop or skip for a few seconds. This is normal for this type of player.

the sun, be sure to choose a location in the car where the player will not be subjected to the direct rays of the sun. • Since a strong magnet is used for the

speakers, keep personal credit cards using magnetic coding or springwound watches away from the player to prevent possible damage from the magnets.

Page 13 of the Lenoxx Electronics CD109 user manual — • Do not stick paper or stickers on the
Page 13 · click to enlarge
Page 13

PRECAUTIONS (continued) Notes on CDs • Before playing, clean the CD with a

MAINTENANCE Cleaning the Lens

If the lens becomes dirty, it may cause a skipping of sound during CD operation. Clean with a commercially available lens cleaner and blower.

cleaning cloth. Wipe the CD from the center out.

Lenoxx Electronics CD109 — MAINTENANCE Cleaning the Lens diagram (page 13)
Fig. 9 · MAINTENANCE Cleaning the Lens

• Do not use solvents such as benzene,

thinner, commercially available cleaners or anti-static spray intended for vinyl LPs.

• Do not expose the CD to direct

sunlight or heat sources such as hot air ducts, nor leave it in a car parked in direct sunlight as there can be a considerable rise in temperature inside the car.

Cleaning the Cabinet Clean the cabinet, panel and controls with a soft cloth slightly moistened with a mild detergent solution. Do not use any type of abrasive pad, scouring powder, or solvent, such as alcohol or benzene.

• Do not stick paper or stickers on the

CD, nor scratch the CD.

• After playing, store the CD in its case.

If there is a scratch, dirt or fingerprints on the CD, it may cause a tracking error or skipping.

Page 14 of the Lenoxx Electronics CD109 user manual — position. • Clean the CD, or replace it if the CD is
Page 14 · click to enlarge
Page 14

TROUBLE SHOOTING

Problem Remedy

The power is not on. • Connect the AC power cord to a wall

outlet securely. • Make sure the batteries are inserted

General CD player Radio

correctly and they are fresh.

• Make sure the FUNCTION switch is at

the right position as you want. • Adjust the volume. • Unplug the headphones when listening

There is no sound.

through speakers.

“ ” appears in the display even when a CD is in place. • Insert the CD with the label side up.

• Make sure that the CD compartment is

closed. • Place the CD with the label side up. • Clean the CD. • Take out the CD and leave the CD DOOR

CD does not play.

open for about an hour to dry moisture condensation. • Make sure the FUNCTION switch is at CD

position. • Clean the CD, or replace it if the CD is

badly damaged. • Place the player in a location free from

The sound drops out.

vibration. • Check if your batteries are fresh.

CD does not play while radio may continue to play. • It is normal since the radio uses less power

than the CD player.

The sound is weak or has poor quality. • Replace all the batteries with new ones if

they are weak, or bring the set near a window, or rotate the set.

Page 15 of the Lenoxx Electronics CD109 user manual — Radio Section Frequency range: FM: 88 - 108 MHz
Page 15 · click to enlarge
Page 15

SPECIFICATION

General Description

Power sourceAC 120V, 60Hz 12Watts DC 9V (6 size “C” batteries) (Alkaline batteries are recommended)
Speakers2 - 3 ” 8 ohm
Output power1.5W/channel
DimensionsWidth: 12 ” Depth: 10 ” Height: 6 ” Weight: 3.3LBs (without batteries)

CD Section Plays disc type: Any normal CD used in portable players

Laser wavelength760 - 800 NM Tracking method: 3 - spot error detection 3.86 mm lens
Frequency response50Hz - 15kHz +1/-2dB

This set will not play CD-RW encoded discs.

Radio Section Frequency range: FM: 88 - 108 MHz

AM530 - 1700 kHz

LENOXX reserves the right to make design and specification changes for product improvement.

PROTECT YOUR FINE FURNITURE! WE RECOMMEND A CLOTH OR OTHER PROTECTIVE MATERIAL BE PLACED UNDER THE SET WHEN PLACING IT ON SURFACE WITH A NATURAL OR LACQUER FINISH.

© 2002 LENOXX ELECTRONICS CORP.

2 GERMAK DRIVE CARTERET, N.J. 07008 MADE & PRINTED IN CHINA

Ask about the Lenoxx Electronics CD109

Owners and our team usually reply within a day — and your question helps the next person too.

Add your email to get notified when it’s answered — no spam, ever.

0 questions
No questions yet about the Lenoxx Electronics CD109

Be the first to ask — other owners or our team will answer.

Original document

Lenoxx Electronics CD109 manual PDF

15 pages·932 KB·CD Player·PDF
Click any page above to open it here
Page 1 / …
100%
Loading pages…