Instruction/ maintenance manual of the product CD-110 Lenoxx Electronics
Go to page of 15
® PORT ABLE CD PLA YER WITH AM/FM RADIO RECEIVER PLA YS MUSIC COMP ACT DISCS FULL Y PROGRAMMABLE CD PLA YER WITH REPEA T PLA Y RECEIVES AM/FM BROADCASTS POWER LED INDICA TO R 2 W .
SAFETY INSTRUCTIONS The lightning flash and arrow head within the triangle is a warning sign alerting you of dangerous voltage inside the product. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).
EXAMPLE OF ANTENNA GROUNDING AS PER NEC - NA TIONAL ELECTRICAL CODE Do not apply oil or petroleum products or solvents to any part of this set. CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
1 . Use only the type and size of batteries mentioned in the operating instructions booklet (batteries are not included with this set, please buy the proper batteries). 2 . Do not dispose the batteries into a fire. The cells may explode. Check with local codes for possible special disposal instructions.
CHOOSING THE POWER SOURCES Y ou can use the AC power or batteries as a power source. TIP If the plug of the AC power cord does not match your outlet, do not force it. Reverse it and try again. The plugs are polarized and only fits one way into the wall outlet and back of the set.
1 Rotate the FUNCTION switch to the CD position. The POWER lamp will turn on. 3 Close the CD DOOR by pushing it down. The display will show the total tracks on that CD. 4 1 3 Press the OPEN button to open the CD door and place the CD in the CD compartment.
USE THESE BUTTONS FOR ADDITIONAL OPERA TIONS To Press or Adjust Adjust the volume VOLUME control (on left side) Stop playback Pause playback The PLA Y/P AUSE lamp will flash during pause.
PLA YING CD TRACKS REPEA TEDL Y (REPEA T PLA Y) 1. Rotate the FUNCTION switch to CD position. 2. Select the track by pressing o r , and then press . 3.
Y ou can make a program of up to 16 tracks in the order you want them to be played. 1 . Rotate the FUNCTION switch to CD position. 2 . Press the PROGRAM button. The letters Pr and the PROGRAM lamp will flash. 3 . Press o r t o select the tracks you want to program in the order you want.
LISTENING TO THE RADIO Connect the supplied AC power cord or batteries (see page 4). Rotate the FUNCTION switch to RADIO position, the POWER lamp will be on. 1 2 3 1 2 3 Rotate the BAND switch to the proper band position (AM or FM) that you want. Tune into the station you prefer using the TUNING control (at the right side of the set).
USE THESE BUTTONS FOR ADDITIONAL OPERA TIONS To Rotate Adjust the volume VOLUME control (at the left side of the set) TIP Turn off the Radio Rotate the FUNCTION switch to OFF position T o improve broadcast reception • Next time you want to listen to the radio, just Rotate the FUNCTION switch to RADIO.
PRECAUTIONS On Safety The laser beam used in the CD player section may be harmful to the eyes, do not attempt to disassemble the cabinet. Refer servicing to qualified personnel only . Should any solid object or liquid fall into the player, unplug the player, and have it checked by qualified personnel b e fo r e operating it any further.
PRECAUTIONS (continued) Notes on CDs Before playing, clean the CD with a cleaning cloth. Wipe the CD from the center out. Do not use solvents such as benzene, thinner , commercially available cleaners or anti-static spray intended for vinyl LPs.
TROUBLE SHOOTING Problem Remedy The power is not on. Connect the AC power cord to a wall outlet securely and make sure AC cord is inserted properly in the back of the set. Make sure the batteries are inserted correctly and they are fresh. There is no sound.
SPECIFICA TION General Description Power source: AC 120V , 60Hz 12Watts DC 9V (6 size D batteries) (Alkaline batteries are recommended) Speakers: 2 - 3 ^ 8 o hm Output power: 1.5W/channel Dimensions: Width: 13 ^ Depth: 10 1 / 2 ^ Height: 5 ^ Weight: 4.
An important point after buying a device Lenoxx Electronics CD-110 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Lenoxx Electronics CD-110 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Lenoxx Electronics CD-110 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Lenoxx Electronics CD-110 you will learn all the available features of the product, as well as information on its operation. The information that you get Lenoxx Electronics CD-110 will certainly help you make a decision on the purchase.
If you already are a holder of Lenoxx Electronics CD-110, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Lenoxx Electronics CD-110.
However, one of the most important roles played by the user manual is to help in solving problems with Lenoxx Electronics CD-110. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Lenoxx Electronics CD-110 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
