Instruction/ maintenance manual of the product CD-210 Lenoxx
Go to page of 21
® COMP ACT DISC PLA YER AM/FM STEREO CASSETTE RECORDER MODEL CD-210 OPERA TING INSTRUCTIONS PLEASE READ CAREFULL Y BEFORE USE PLA YS ALL MUSIC COMP ACT DISCS DIGIT AL TUNING WITH 20 RADIO PRE.
SAFETY INSTRUCTIONS The lightning flash and arrow head within the triangle is a warning sign alerting you of dangerous voltage inside the product. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).
SAFETY INSTRUCTIONS EXAMPLE OF ANTENNA GROUNDING AS PER NEC - NA TIONAL ELECTRICAL CODE It is the intent of Lenoxx that this product be used in full compliance with the copyright laws of the United States and that prior permission be obtained from copyright owners whenever copying tapes or CDs.
1 . Use only the type and size of batteries mentioned in the operating instructions booklet (batteries are not included with this set, please buy the proper batteries). 2. Do not dispose the batteries into a fire. The cells may explode. Check with local codes for possible special disposal instructions.
CHOOSING THE POWER SOURCES Y ou can use the AC power or batteries as a power source. TIP If the plug of the AC power cord does not match your outlet, do not force it. Reverse it and try again. The plugs are polarized and only fits one way into the wall outlet and back of the set.
LISTENING TO THE RADIO Connect the supplied AC power cord or batteries (see page 4). 12 2 Tune into the station you prefer using the TUNING UP or DOWN button.
PRESETTING ST A TIONS 6 Connect the supplied AC power cord or batteries (see page 4). 5 Press the STORE button again to confirm, the station now broadcasting is stored into that preset memory location. PROGRA M disappears from the display . 6 Repeat the above steps to store other 9 stations into memory .
USE THESE BUTTONS FOR ADDITIONAL OPERA TIONS T o Press or Adjust Adjust the volume VOLUME control Turn off the Radio Press the POWER switch. TO IMPROVE RADIO RECEPTION Change position of the antenna for FM or FM Stereo.
PLA YING A CD 1 Press the POWER switch, the POWER indicator lamp will go on. 4 1 3 Open the CD DOOR by pushing it down at the position marked OPEN/CLOSE and place the CD in the CD compartment. The label side of the CD should face upward. 2 4 8 Connect the supplied AC power cord or batteries (see page 4).
USE THESE BUTTONS FOR ADDITIONAL OPERA TIONS T o Press or Adjust Adjust the volume VOLUME control Stop playback Pause playback The elapsed playing time will flash during pause.
PLA YING CD SONGS OVER AND OVER (Repeat Play) Y ou can play CD tracks repeatedly in normal or programmed play modes (see page 1 1). T o repeat Press a single track (song) Press the REPEA T ( ) button twice, REPEA T will flash. all the tracks (all songs) Press the REPEA T ( ) button once, REPEA T will be steady on.
SELECTING YOUR OWN MUSIC PLA YING ORDER (Programmed Play) 11 T o cancel Program Play Press the STOP button. 1 2 3 4 5 During STOP mode, press the PROGRAM ( PGM ) button. The display will show , PROGRA M and TRAC K will flash in the display .
PLA YING A CASSETTE T APE Connect the supplied AC power cord or batteries (see page 4). Press the STOP/EJECT button to open the cassette door and insert a recorded tape. Close the door . 3 2 Press the PLA Y button. The player turns on and starts playing.
USE THESE BUTTONS FOR ADDITIONAL OPERA TIONS To Stop playback Eject the cassette Get different sound effect BASS BOOST switch for more BASS sounds Press or Adjust Adjust the volume VOLUME control Fast forward or rewind the tape F A ST FOR W ARD button or REWIND button Pause playback P AUSE button Press again to resume play after pause.
RECORDING ON A T APE Connect the supplied AC power cord or batteries (see page 4). Press the STOP/EJECT button to open the tape compartment and insert a blank tape. Select the program source (AM, FM, CD, or built-in microphone) you want to record. 1 2 T o record from the CD player , insert a CD and follow the steps to play a CD (see page 8).
USE THESE BUTTONS FOR ADDITIONAL OPERA TIONS To Turn off the power Press the STOP/EJECT button and the POWER switch. TIP • Adjusting the VOLUME or pressing the BASS BOOST will not affect the recording level. Press or Adjust Stop recording STOP/EJECT button P AUSE button Press the button again to resume recording.
PRECAUTIONS On Safety As the laser beam used in the CD player section is harmful to the eyes, do not attempt to disassemble the cabinet. Refer servicing to qualified personnel only . Should any solid object or liquid fall into the player , unplug the player , and have it checked by qualified personnel before operating it any further .
PRECAUTIONS (continued) Notes on CDs Before playing, clean the CD with a cleaning cloth. Wipe the CD from the center out. Do not use solvents such as benzene, thinner , commercially available cleaners or anti-static spray intended for vinyl LPs.
MAINTENANCE Cleaning the Lens If the lens becomes dirty , it may cause a skipping of sound during CD operation. Clean with a commercially available lens cleaner and blower .
TROUBLESHOOTING Problem Remedy The power is not on or the POWER indicator lamp is dim. Connect the AC power cord to a wall outlet securely . Make sure the batteries are inserted correctly and they are fresh. There is no sound. Make sure the appropriate indicator lamp is ON as you want.
SPECIFICA TION 20 General Description Power source: AC 120V , 6 0Hz 15W atts DC 12V (8 size C batteries) (Alkaline batteries are recommended) Speakers: 2 - 4 8 ohm Output power: 2.
An important point after buying a device Lenoxx CD-210 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Lenoxx CD-210 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Lenoxx CD-210 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Lenoxx CD-210 you will learn all the available features of the product, as well as information on its operation. The information that you get Lenoxx CD-210 will certainly help you make a decision on the purchase.
If you already are a holder of Lenoxx CD-210, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Lenoxx CD-210.
However, one of the most important roles played by the user manual is to help in solving problems with Lenoxx CD-210. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Lenoxx CD-210 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
