Instruction/ maintenance manual of the product Parallel-PCI/LP Card Lava Computer
Go to page of 8
La v a P arallel-PCI/LP Installation Manual Rev . B00 LAVA COMPUTERS PARALLEL PCI/LP P.N. MOKO L72.4 MADE IN CANADA PN MOKO S-1 MADE IN JAPAN 0255351.
Wind ows Ha rdware a nd Driv er Installation 1. Before opening the casing of y our computer , make sure that all power is off . 2. Locate an unused PCI slot and insert the Parallel-PCI/LP car d into it.
necessary files from the diskette, Windows may restart your PC in order to complete the installation of the P arallel-PCI/LP card. Any Plug and Play printers attached to the P arallel-PCI/LP will now also be detected and installed. Windows XP may display a message t o the effect that the drivers are not digitally signed .
C onnec ting a non-printer de vice (e.g . external driv e or parallel scanner) to the Par allel-PCI/LP In Windows 95/98/ME (not Windows 2000/XP) some parallel port devices require parallel ports that use standard (legacy) ISA LPT addresses (0278h or 0378h).
2. Remove the check mark from the U se Automatic Settings box. Note: In some cases Windows will giv e an error message to the effect that "Windows cannot modify this resource" at this point. If you are unable to access the settings for changing syst em resources, reboot the system in Safe Mode to make changes to resour ce settings.
4. Use the up/down arrows t o scroll to one of the following r ange settings, or type them in manually : 0278 – 027F 0378 – 037F 0238 – 023F 02B8 – 02BF 5.
Release Notes: A. This documentation describes the installation of the P arallel-PCI/LP card on a Windows95/98/Me/2000/XP PC. Instructions and sof tware for DOS, Windows 3.x, and Windo ws NT 4.0 may be found in the NT4.0 subdirectory of the Parallel-PCI/LP card Installation diskette.
La va C omputer MFG Inc. La v a T echnical Suppor t 9:00 am to 5:30 pm Monday t o F riday (Eastern Time) T el: +416 674-5942 F ax: + 416 674-8262 E-mail: tech@lav alink.com Internet: www .lavalink.c om This device complies with part 15 of the FCC Rules.
An important point after buying a device Lava Computer Parallel-PCI/LP Card (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Lava Computer Parallel-PCI/LP Card yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Lava Computer Parallel-PCI/LP Card - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Lava Computer Parallel-PCI/LP Card you will learn all the available features of the product, as well as information on its operation. The information that you get Lava Computer Parallel-PCI/LP Card will certainly help you make a decision on the purchase.
If you already are a holder of Lava Computer Parallel-PCI/LP Card, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Lava Computer Parallel-PCI/LP Card.
However, one of the most important roles played by the user manual is to help in solving problems with Lava Computer Parallel-PCI/LP Card. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Lava Computer Parallel-PCI/LP Card along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
