Instruction/ maintenance manual of the product IP/232 Lava Computer
Go to page of 16
Rev . C00 ™ LA V A P a yLink-IP/232 Quick Installation Guide.
1 Congratulations on y our purchase of a LA V A Pa yLink-IP/232. Pa yLink-IP devicess securely connect payment t erminals to payment processors o ver an Ethernet/T CP/IP connection.
Hardwar e Setup 2 1. Connect the power supply to the and t o AC pow er . The po wer (red) LED will light to indicate that the unit is receiving pow er . 2. Connect to the Ethernet RJ-45 jack of the . Attach the other end of the crossover netw ork cable to a host PC directly .
3 3. Open a web browser t o the IP address of the P ayLink-IP and configure the device as described in the "C onfiguration" section of this manual. 4. After configuring the LA V A P ayLink-IP/232, attach it to your network and connect a payment terminal to its serial port.
4 Configuration consists of the f ollowing: B. Port configuration C. Host configuration D . T erminal Side Data and Protocol c onfiguration E. Password selection F . Upgrading software A. Configuring network settings C onfigura tion A. Configuring network settings Pa yLink-IP devices installed on your netw ork will need unique IP addresses.
5 Click "Configure" if no passwor d has been set, or enter the password for the P ayLink you are configuring , and then click "Configure .
6 If not using a DHCP ser ver t o assign network addresses , choose the "Manually configure" option for Netw ork Settings. In the configuration screen that appears , enter the network settings you wish for that P ayLink-IP . Once the new v alues are entered and accepted , the Pa yLink-IP will reboot to implement the new netw ork settings.
7 Device name IP address Subnet mask Default gatewa y HTTP por t DHCP enabled Use this field to supply a “friendly ” name for the device being configured . The friendly name is optional, and can be chosen to provide a con veniently-r emembered name for the unit.
8 “DHCP enabled” checkbox has been set. The will then act as a DHCP client and obtain its IP address from the DHCP server on its LAN that first leases an IP address to the . Use this dialog box to change the TCP port number assigned to the serial port of the .
9 B . Port configuration The P ayLink-IP/232 serial port can be configured through a web browser . The settings for the LA V A Pa yLink-IP/232's serial port should match the settings of the serial port on the payment terminal.
10 Data bits Par it y Stop bits Flow contro l T erminal ID This parameter can be set from 5 t o 8. By default this parameter is set to 8 bits. This parameter can be set ev en, odd, none , mark, or space. By default this parameter is set to none . This parameter can be set 1, 1.
11 C. Host configuration The P ayLink-IP/232 P ayment Host c onfiguration screen has fields for entering IP address/DNS name and TCP port information for up to four pa yment processing hosts. Each host can also be configur ed for the P ayLink to use a fallback addr ess By default, these fields are empty .
12 D . T erminal Side Data and P rotocol C onfiguration The P ayLink-IP/232 permits each host connection to be configured with specific data format and protoc ol configurations, using the screens shown below . T hese parameters are described in detail in the PDF manual supplied with the Pa yLink software.
13 By default, the LA V A Pa yLink-IP/232's connection to the payment processor is set up using an SSL V er . 3.0 link. Disabling this setting will send data over an unsecured TCP/IP link.
14 F . Upgrading Software New versions of P ayLink-IP software and firmware ma y be found at www .lav alink.com. Passw ord Selection E. Passwor d selection The P ayLink-IP/232 passwor d configuration screen can be accessed through a web bro wser .
LA V A C omputer MFG Inc. T oronto , Canada LA V A T echnical Suppor t 9:00 am to 5:30 pm Monday to F r ida y (Eastern Time) T el: +416 674-5942 F ax: + 416 674-8262 E-mail: tech@lav alink.com Internet: www .lavalink.com This device complies with part 15 of the FCC Rules.
An important point after buying a device Lava Computer IP/232 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Lava Computer IP/232 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Lava Computer IP/232 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Lava Computer IP/232 you will learn all the available features of the product, as well as information on its operation. The information that you get Lava Computer IP/232 will certainly help you make a decision on the purchase.
If you already are a holder of Lava Computer IP/232, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Lava Computer IP/232.
However, one of the most important roles played by the user manual is to help in solving problems with Lava Computer IP/232. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Lava Computer IP/232 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
