Instruction/ maintenance manual of the product 19" 1U Intel Pentium 4 Socket T Rackmount Network Security Platform Lanner electronic
Go to page of 52
FW -7870 Series 19” 1U Intel Pentium 4 Socket T Rackmount Network Security Platform User’s Manual.
ii Copyright and Disclaimers © Copyright 2004 - Lanner Electronics Inc. All Rights Reserved The contents in this publication have been thoroughly checked and considered accurate.
iii Safety Instruc tions The following information relates to the safety of installation and maintenance personnel. Read all instructions before attempting to unpack, insta ll or operate this equipm ent, especially before connecting the power adapter .
iv Getting T echnical Assistance Should you encounter questions or probl ems w ith your FW -7870, Lanner Electronics is ready to assist you within the guidelines of our product support programs. First, check the electronic product documentation for assistance.
v T able of Contents Copyright and Disclaimers ....................................................................................................ii T rademark Acknowledgments ..........................................................................
vi 3.5 Advanced Chipset Features ........................................................................ 24 3.6 Integrated Peripherals ................................................................................. 26 3.7 Power Management Setup ...
1 C h a p t e r 1 Getting Started 1.1 Introduction Figure 1 – FW -7870 Outlook The FW -7870 is a 1U rackmount network security solution targeting the Enterprise market. The FW -7870 supports Socket T for Intel Pen tium 4 processor with 533/800 MHz FSB.
2 1.2 T echnical Specifications Model Name FW-7870 SBC SBC MB-X76A CPU Socket T(LGA 775) for Intel Pentium 4 Processor Chipset Intel 915GV/Intel i82801 FB BIOS Award BIOS Memory Two 184 pin DDR DIMM N.
3 1.3 Packing Contents Carefully unpack your package and make sure that you have the following items. FW -7870 Network security Platform Console cable 1.
4 1.4 MB-X76 System Board MB-X76 is the system board bundled with the FW -7870 Network security platform. The succeeding sections list all MB-X76 related jump er settings and connector pin a ssignments.
5 1.4.2 Jumper Settings and I/O Connector The onboard jumper settings and I/O connector of MB-X76 are custom-tailored to fit the FW -7870 functionality .
6 PSC1:24 Pin ATX Power Connector FAN1-3 : 3 Pin FAN Connector) Pin No. Description 1 Ground 2 +12V 3 FA N S t a t u s PKMB1: PS/2 Keyboard & Mouse Connector (2x4 Header 2.54mm ) Pin No. Description 1 KBCLK 2 Ground 3 NC 4 KBDA T A 5 NC 6 MSDA T A 7 MSCLK 8 VCC Pin No.
7 USBF1 ： USB Port #1 & #2 Connector 2x5 Pin 2.54mm Pin No. Descption Pin No. Description 1 USB_VCC 2 Grond 3 Key 4 USBD1+ 5 USBD0- 6 USBD1- 7 USBD0+ 8 Key 9 Ground 10 USB_VCC.
8 1.5 FW -7880 19” 1U Rackmount Firewall Mechanisms This section of the manual describes the mechan ical and device nomenclature of FW -7880. 1.5.1 Face Panel Figure 5 – FW -7870 Face Panel Face Panel LED S tatus and Behavior The following table lists and explains the beha vior of each LED on the FW -7870 front panel.
9 Console Port: via the console port cable, this connector attaches FW -7870 to the host PC. LCM & Keypad Please reference the Appendix B.
10 1.5.3 Rear View Figur e 6 – FW -7870 Rear V iew Power Switch: Click the Power Switch , and the system will be power on. Faulty or impr oper use of the power adap tor may cause permanent damage to the power supply and the FW -7870. Plug the adap tor to an electrical wall outlet that matches its specifications.
C h a p t e r 2 FW-7870 Hardware Installation Guide 2.1 Hardware Installation Guide - Removing the Top Cover Step 1 : Unscrew Five screws from the system.
- CPU Installation Step 1: Rem ove the fan cover scre w (3 pcs) Step 2: To l oosen the therm al modul e screw (4 pcs) Step 3: Ope n socket lever by pushing lever down a nd away from socket.
Step 4: Open load plate, (DO NOT TO UCH SOC KET CONTAC TS) Step 5: Align notches with socket. Step 6: Close load plate. Pressing down on l oad plate, close and e ngage soc ket lever. Step 7: Place the therm al module onto the main b oard, lock o n the therm al module screw ( 4pcs), then loc k on the fan m odule screw.
- System Memory - Figure 1: The DIMM slot has a notch, the DIMM memory module only fit in on e direction. - Figure 2: Align the memory notch to the module and push the memory into the DIMM socket Figu.
Installing Hard Disk Drive: Figure 1 : Put the Hard disk on the bracket, and screwing 4 screws. Figur e 1-1 F i g u r e 1 - 2 Figure 2: plug in the SATA power connector Figure 2 Figure 3: left side is power connector right side is SATA connector.
Figure 4 : Screwing the HDD bracket screws (4pcs). Figure 4 - Installing Compact Flash Card Figure 1 : Insert the compact flash card into the slot carefully as shown in the picture. Figure1 - Installing the Mini-PCI Card Figure 1: Insert the PCI expansion card into the mini-PCI slot at 45 degree.
Chapter 3 Award BIOS Setup 3.1 BIOS Setup A ward‘s ROM BIOS provides a built-in Setup prog ram that allows users to modify the basic system configuration and settings. The modified data will be stored in a battery-backed CMOS RAM so that this data will be retained even when the power is turned of f.
<Esc> Main Menu - Quit and not save changes in to CMOS Status Page Setup Menu and Option Page Set up Menu - E xit curr ent page and return to Main Menu <+/PgUp> Increase the num eric value.
3.2 Main Menu Once you enter the AwardBIOS™ CMOS Setup Utility, the Main Menu will appear on the screen. The Main Menu allows you to s elect fro m several setup functions and two exit choices. Use the arrow keys to select among the items and press <Enter> to accept and enter the sub-menu.
Set Supervisor password Use this menu to set Supervisor Passwords. Set User password Use this menu to set User Passwords. Save & Exit Setup Save CMOS value changes to CMOS and exit setup. Exit Without Saving Abandon all CMOS value changes and ex it setup.
detailed options IDE Channel 1 Master Options are in its sub menu Press <Enter> to enter the sub menu of detailed options IDE Channel 2 Master Options are in its sub menu Press <Enter> to .
Cylinder Min = 0 Max = 65535 Set the num ber of cylinde rs for this hard disk . Head M in = 0 Max = 255 Set the number of read/write heads Precomp Mi n = 0 Max = 65535 **** W arning : Setting a value of 65535 means no hard disk Landing zone Min = 0 Max = 65535 **** Sector Min = 0 Max = 255 Num ber of sectors per trac k 3.
CPU L3 Cach e: The option enables secondary cache mem ory . If enabled is selected, external cache memory is enabled. If disabled is se lected, external cache mem ory is disabled. Hyper - Threading T echnology : Allows you to enable or disable th e CPU Hyper -Threading T echnology feature.
Boot Up Sequence. MPS V ersion Contr ol For OS : An MP Platform interface standard that extends the performance of the existing PC/A T platform beyond the traditional sing le processor limit, while maintaining 100 % PC/A T binary compatibility . OS Select Fo r DRAM > 64MB : The default setting is “Non -OS2”.
DRAM Date I ntegrity Mode : Select Non-ECC or ECC (error -correcting code ), according to the type of installed DRAM. System BIOS Cacheable : Selecting “Enabled” allows c aching of the system BIOS ROM at F0000h – FFFFFh, resulting in better system perfo rmance.
3.6 Integrated Peripherals On-Chip (Primary/Secondary) PCI IDE : The int egrated periphe ral control ler contains an IDE interface with support for two IDE channe ls.
controller an d you have a USB keyboar d. Onboard LA N Contr ol : This setting controls the onboard LAN Controller. Enabled Enable Onboa rd H/W LAN functi on. Disabled Disable Onboard H/W L AN functio n. LPT/LCM Control : Use this optio n to enable and c onfigure or disable t he LPT/LCM po rt present on the evaluatio n board.
SuperIO Device : Scroll to this item and press <Enter> to view the following screen: Power On Fu nction/ KB Power ON Password/ Hot Ke y Power O n : This item allows the user to power on the system by pressing hot-keys, o r typing in a password .
IR T ransmission Delay : When UAR T Mode is selected in IrDA or ASKIR mode, it allows you to enable / disable UR2 Duplex Mode (Half) : This field is available when UAR T 2 M ode is set to either ASKIR or IrDA. This item enables you to determine the in frared function of the onboard infrared chip.
3.7 Power Management Setup The Power Management Setup allows you to c onfigure you system to most ef fectively save energy while operating in a manner consistent with your own style of computer use. ACPI Function : This item allows you to enable or disable the Advanced Configuration and Power Management (ACPI).
Suspend Mode When enabled and after the set time of system inactivity , all d evices except the CPU will be shu t off. Configuration options: Disabled / 1 Min / 2 Min / 4 Min / 8 Min / 12 Mi n / 20 Min / 30 Min / 40 Min / 1 Hour .
3.8 PnP/PCI Configuration This section describes configuring the PCI bus system. PCI, or P ersonal C omputer I nterconnect, is a system which allows I/O devi ces to operate at speeds nearing the speed the CPU itself uses when communicating with its own special components.
3.9 PC Health Status Throttling Temperature Detect CPU temperature automatically . FAN 1 / FAN 2 / FAN 3 Detect Fan1 / FAN2 speed status automa tically .
3.11 Load Optimized Defaults When you press <Enter> on this item you get a confirmation dialog box with a message similar to: Load Optimized Defaults (Y/N) ? N 3.12 Supervisor/User Password Setting You can set either supervisor or user password, or both of then.
ENTER PASSWORD: Type the password, up to eight characters in length, and press <Enter>. The password typed now will clear any previously entere d password from CMOS memory. You will be asked to confirm the password. Type the password again and press <Enter>.
Pressing <Enter> on this item asks for confirmation: Save to CMOS and EXIT (Y/N)? Y Pressing “Y” stores the selections made in the menus in CMOS – a special section of memory that stays on after you turn your system off.
3.14 Exit Without Saving Pressing <Enter> on this item asks for confirmation: Quit without saving (Y/N)? Y This allows you to exit Setup without st oring in CMOS any change. The previous selections remain in effect. This exits the Setup utility and restarts your com puter.
Appendix A Power Supply Power Supply Specification AC Input Spec : VOL T AGE 90 ~ 264 V AC F UL L RANGE Output Specifications Output V oltage Output Current Min. Output Current Max. Output Current Peak Regulation Load Regulation Line Output Ripple & Noise Max.
Appendix B Watchdog Timer Intr oduction Most systems need to be self-reliant. It's not usually possible to wait for someone to reboot them if there are so me component wrong. Some system designs, such as space probes, are simply not accessible to human operators.
= 0 Disable = 1 Enable Bit 1-0 : Reserved CRF6 (Defaul t 0x00) Watch Dog Timer Time-out valu e. Writing a non-zer o value to th is register causes the counter toload the value to Watch Dog Counter and start coun ting down.
A p p e n d i x C Console Redirection Console redirection allows you to maintain a system from a remote location by re-directing keyboard input and text output through the serial port. T his section will tell you how to use console redirection. 1. Please insert console cable between on FW -7870 and Remote Client System.
A p p e n d i x D LCD Module and Key Pad For FW-7870 Purpose The purpose of this document is to provide insta llation inform ation for the LCD module and key pad installed in the FW -7870. Specification overview The LCD module is designed to provide real-time opera ting status and configuration information for the system.
2.Read_KeyPad(); =>This Function get the KeyPad number if user pressed key . =>Direct write function to your program. Ex. int a; a=Read_KeyPad(); Return V alue: "1"=>The Upper Key "2"=>The Down Key "3"=>The Enter Key "4"=>The ESC Key 3.
Terms and Conditions Date:2004. 07.08 W arranty Policy 1. All products are warranted a gainst defects in materials and workmanship f or a period of two years from the date of your purchase.
RMA Service Request Form When requesting RMA service, please fill out this RMA Service Request Form . W ithout this form your RMA will be REJECTED!!! RMA No: Reasons to Return: □ Rep air(Please include failu re details) □ T esting Purpose Company: Contact Person: Phone No.
PEXNSD01-040709 V ersion 1.0 Printed and published in T aiwan.
An important point after buying a device Lanner electronic 19" 1U Intel Pentium 4 Socket T Rackmount Network Security Platform (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Lanner electronic 19" 1U Intel Pentium 4 Socket T Rackmount Network Security Platform yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Lanner electronic 19" 1U Intel Pentium 4 Socket T Rackmount Network Security Platform - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Lanner electronic 19" 1U Intel Pentium 4 Socket T Rackmount Network Security Platform you will learn all the available features of the product, as well as information on its operation. The information that you get Lanner electronic 19" 1U Intel Pentium 4 Socket T Rackmount Network Security Platform will certainly help you make a decision on the purchase.
If you already are a holder of Lanner electronic 19" 1U Intel Pentium 4 Socket T Rackmount Network Security Platform, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Lanner electronic 19" 1U Intel Pentium 4 Socket T Rackmount Network Security Platform.
However, one of the most important roles played by the user manual is to help in solving problems with Lanner electronic 19" 1U Intel Pentium 4 Socket T Rackmount Network Security Platform. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Lanner electronic 19" 1U Intel Pentium 4 Socket T Rackmount Network Security Platform along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
