Instruction/ maintenance manual of the product RCR16 Series Land Pride
Go to page of 28
Cov er photo ma y show optional equipment not supplied with standard unit. © Cop yright 2001 Pr inted Read the Operator’ s man ual entirely . When you see this symbol, the subsequent instructions and warnings are serious - follow without e xception.
© Copyright 2001 All rights Reserved Land Pride provides this publication “as is” without warr anty of any kind, either expressed or implied. While e very precaution has been taken in the preparation of this manual, Land Pride assumes no responsibility for errors or omissions.
1 Important Safety Information 12/14/01 RCR16 Series Rotar y Cutters 312-742M Land Pride Important Safety Information Keep Rider s Off Machinery ▲ Riders obstruct the operator’ s view the y could be struck by f oreign objects or thrown from the machine.
2 Important Safety Information RCR16 Series Rotar y Cutters 312-742M 12/14/01 Land Pride Use Safety Lights and Devices ▲ Slow mo ving tractors, self- propelled equipment, and towed implements can create a hazard when driven on pub lic roads. They are difficult to see, especially at night.
3 Important Safety Information 12/14/01 RCR16 Series Rotar y Cutters 312-742M Land Pride These are common practices that ma y or may not be applicab le to the products described in this manual. Prepare for Emer gencies ▲ Be prepared if a fire star ts.
4 Important Safety Information RCR16 Series Rotar y Cutters 312-742M 12/14/01 Land Pride Safety Labels Your implement comes equipped with all safety labels in place. They were designed to help you safely operate your implement. 1. Read and follow label directions.
5 Important Safety Information 12/14/01 RCR16 Series Rotar y Cutters 312-742M Land Pride ROTATING DRIVELINE KEEP AWAY! 818-552C Danger PT O Driveline ROTATING DRIVELINE KEEP AWAY! 818-556C Danger Thro.
6 Important Safety Information RCR16 Series Rotar y Cutters 312-742M 12/14/01 Land Pride 818-830C Saf ety Combo 19745.
7 Introduction 12/14/01 RCR16 Series Rotar y Cutters 312-742M Land Pride Introduction Owner Assistance The Warranty Registration card should be filled out by the dealer at the time of purchase. This information is necessary to provide you with quality customer service.
8 Section 1 Assembl y and Set-Up RCR16 Series Rotar y Cutters 312-742M 12/14/01 Land Pride Section 1 Assembly and Set-Up T ractor Requirements The RCR16 Series Rotar y Cutters are designed for use with tractors that are equipped with a (540 RPM 1 3/8”-6 spline) rear pow er take-off (PT O).
9 Section 1 Assembl y and Set-Up 12/14/01 RCR16 Series Rotar y Cutters 312-742M Land Pride Driveline Installation Refer to Figure 1-3: 6. Remov e the snap ring (#1) from the gearbox input shaft. Slide the driveline (#2) on to the gearbo x shaft and replace the snap ring to the gearbox shaft.
10 Section 1 Assembl y and Set-Up RCR16 Series Rotar y Cutters 312-742M 12/14/01 Land Pride Front Rubber Guar ds Install front rubber guards center (#1), left hand (#2) and right hand (#3), as shown i.
11 Section 1 Assembl y and Set-Up 12/14/01 RCR16 Series Rotar y Cutters 312-742M Land Pride b . Pull driveline apar t. Reattach outer sections to tractor and gearbo x. Pull on driveline section to be sure that yok e locks into place . c. Hold dr iveline sections par allel to each other to deter mine if too long.
12 Section 2 Operating Instructions RCR16 Series Rotar y Cutters 312-742M 12/14/01 Land Pride Section 2 Operating Instructions T ranspor ting ! CAUTION When traveling on public r oads, use accessory lights and devices for adequate warning to oper ators of other vehicles.
13 Section 2 Operating Instructions 12/14/01 RCR16 Series Rotar y Cutters 312-742M Land Pride Proper adjustment of each of these items will provide f or higher efficiency , improved cutting perf or mance and longer blade lif e . The follo wing tools will be needed: a.
14 Section 2 Operating Instructions RCR16 Series Rotar y Cutters 312-742M 12/14/01 Land Pride Cutter Height Adjustment Refer to Figure 2-3: If the cutting height is too high or too low , the gauge wheel must be adjusted as f ollows: a. Use the tractor’ s 3-point hydraulic control to lift the cutter such that the gauge wheel clears the ground.
15 Section 3 Maintenance and Lubrication 12/14/01 RCR16 Series Rotar y Cutters 312-742M Land Pride Section 3 Maintenance and Lubrication Maintenance Proper ser vicing and adjustment can increase the lif e of any implement. With careful and systematic inspection, you can av oid costly maintenance, time and repair .
16 Section 3 Maintenance and Lubrication RCR16 Series Rotar y Cutters 312-742M 12/14/01 Land Pride occurred and the clutch must be disassemb led to separate the friction discs, see " Clutch Assemb ly and Disassembl y ", on page 16.
17 Section 3 Maintenance and Lubrication 12/14/01 RCR16 Series Rotar y Cutters 312-742M Land Pride Lubrication Gauge Wheel Spindle T ube T ype of Lubrication: Grease Quantity = 6 pumps Gauge Wheel Hub The gauge wheel hub is equipped with a relief hole located directly opposite the grease fitting.
18 Section 3 Maintenance and Lubrication RCR16 Series Rotar y Cutters 312-742M 12/14/01 Land Pride 20 Driveline Pr ofiles Quantity = Clean & coat the inner tube of the driveline with a light film of grease and then reassemb le.
19 Section 4 Specifications and Capacities 12/14/01 RCR16 Series Rotar y Cutters 312-742M Land Pride Section 4 Specifications and Capacities Model RCR1660 RCR1672 Cutting Width 60" 72" Over.
20 Section 5 Features and Benefits RCR16 Series Rotar y Cutters 312-742M 12/14/01 Land Pride Section 5 Features and Benefits Features Benefits Floating top link P ermits deck to f ollow the terrain f or an e ven cut. Fully welded dec k Robotic welded.
21 Section 6 T roubleshooting 12/14/01 RCR16 Series Rotar y Cutters 312-742M Land Pride Section 6 T roubleshooting Prob lem Cause Solution Oil seal leaking Gearbo x ov erfilled Drain to side plug hol.
22 Section 6 T roubleshooting RCR16 Series Rotar y Cutters 312-742M 12/14/01 Land Pride Excessive vibration Driveline bent Replace driveline Blades loose Tighten blade bolts Blade carrier bent Replace.
23 Section 6 Appendix 12/14/01 RCR16 Series Rotar y Cutters 312-742M Land Pride Section 6 Appendix T orque V alues Char t for Common Bolt Sizes in-tpi 1 N · m 2 ft-lb 3 N · m ft-lb N · m ft-lb mm x pitch 4 N · m ft-lb N · m ft-lb N · m ft-lb 1/4" - 20 7.
24 Section 6 Appendix RCR16 Series Rotar y Cutters 312-742M 12/14/01 Land Pride Warranty Land Pride warrants to the original purchaser that this Land Pride product will be free from defects in materia.
.
Cor porate Office: P .O . Box 5060 Salina, Kansas 67402-5060 USA www .landpr ide.com.
An important point after buying a device Land Pride RCR16 Series (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Land Pride RCR16 Series yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Land Pride RCR16 Series - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Land Pride RCR16 Series you will learn all the available features of the product, as well as information on its operation. The information that you get Land Pride RCR16 Series will certainly help you make a decision on the purchase.
If you already are a holder of Land Pride RCR16 Series, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Land Pride RCR16 Series.
However, one of the most important roles played by the user manual is to help in solving problems with Land Pride RCR16 Series. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Land Pride RCR16 Series along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
