Instruction/ maintenance manual of the product RCM6010 Land Pride
Go to page of 302
Rotary Cutters RC5010, RCM5010, RC6010 & RCM6010 16602 318-622P Parts Manual Read the Operator's manual entirely . When you see this symbol, the subsequent instructions and warnings are serious - follow without exception.
Section 1: Introduction .................................................6 Using This Manual ...............................................................6 Manual Replacement Inf or mation .......................................6 Manual Re visions .
Hydraulic Cylinder Wing (810-312C) Midwa y .............144 Hydraulic Wing Lift .....................................................146 Section 9: Labels ...................................................148 Label Placement .........................
RC5010 & RC6010 SERIES (540 RPM) A Axle Center Dual (S/N 489025-) .......................................26 Axle Center Dual (S/N 489026+) ......................................28 Axle Center Single (S/N 489025-) ..................................
B Blade Carrier ..............................................................152 D Deck Center Section (1000 RPM) (RCM50 Series Only S/N 217473-) .......................................................154 Deck Center Section (1000 RPM) (S/N 217474+) .
6 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index.
02/03/09 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 7 T able of Contents P ar t Number Index.
15351 8 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 2: Hitch RC5010 & RC6010 SERIES (540 RPM) Hitch Applies to .
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15351 Includes items 1 through 9 ASSY . T ONGUE 318-054L WLDMT . TONGUE CLEVIS 318-005H 1. SAFETY CHAIN 10000 LB 890-182C 2. HHCS 1-8X2 1/2 GR5 802-096C 3. W ASHER FLA T 1 USS 804-028C 4.
16969 10 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 3: Decks RC5010 & RC6010 SERIES (540 RPM) Blade Carrier Ap.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg16969 BLADE BOL 1 1/8-12X3 7/16 W/KY 802-277C 1. Standard Blade Quantity 2 per Center Section CUTTER BLADE 1/2X4X29 CCW 820-168C 2. Optional Blade Quantity 2 per Center Section CUTTER BLADE 1/2X4X29 LL CCW 820-188C 2.
15338 12 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 3: Decks RC5010 & RC6010 SERIES (540 RPM) Dec k Center Sec.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15338 ASSY . CENTER SECT . 540 RPM 318-026L Includes items 26 par t no. 826-174C, 27, 33 & 34 ASSY . SUB CENTER SECT .540 RPM 318-073S RPBY 318-148K 318-016H 1. NUT HEX WHIZ 1/2-13 PL T 803-037C 2.
16924 14 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 3: Decks RC5010 & RC6010 SERIES (540 RPM) Dec k Center Sec.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg16924 WLDMT . SKID SHOE LH. 318-146H 1. NUT HEX WHIZ 1/2-13 PL T 803-037C 2. HFS 1/2-13X2 GR8 802-456C 3. OMNI Gear Box W ASHER LOCK SPRING 3/4 PL T 804-023C 4. OMNI Gear Box HHCS 3/4-10X1 1/2 GR5 802-184C 5.
Revision Comments P ar t Description P ar t No. Ref. WLDMT . CENTER SECTION RED 318-568H83 29. RC6015 WLDMT . CENTER SECTION W/DECK RINGS 318-931H 29. WLDMT . CENTER SECTION W/DECK RINGS GREEN 318-931H81 29. WLDMT . CENTER SECTION W/DECK RINGS RED 318-931H83 29.
This P age Intentionally Left Blank 02/03/09 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 17 T able of Contents P ar t Number Index Section 3: Decks Land Pride RC5010 & RC6010 SER.
16607 18 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 3: Decks RC5010 & RC6010 SERIES (540 RPM) Dec k Wing Right.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg16607 ASSY . WING RH. SECT . 540 RPM 318-027L Includes items 7, 12, 13 par t no . 826-175C & 14 ASSY . SUB WING SECT .RH.540 RPM 318-074S DEFLECT OR 318-087D 1. DEFLECT OR GREEN 318-087D81 1.
Revision Comments P ar t Description P ar t No. Ref. (S/N 219146+) DEFLECT OR FLA T RH. 318-170D 25. DEFLECT OR FLA T RH. GREEN 318-170D81 25. DEFLECT OR FLA T RH. RED 318-170D83 25. RC5010 PT O CA T .4 W/CLUTCH 1 3/4-20 826-185C 26. RC6010 (S/N 461935 to 461937, 468573+) PT O V80 X 59.
This P age Intentionally Left Blank 02/03/09 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 21 T able of Contents P ar t Number Index Section 3: Decks Land Pride RC5010 & RC6010 SER.
16606 22 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 3: Decks RC5010 & RC6010 SERIES (540 RPM) W eight Bo x App.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg16606 1475 lbs. Bo x (S/N 355736, 355738, 355740, & 369323+) 1150 lbs. Bo x (S/N 369322- except as noted) WLDMT WEIGHT BO X 318-107H 1. WLDMT WEIGHT BO X GREEN 318-107H81 1.
15488 24 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 3: Decks RC5010 & RC6010 SERIES (540 RPM) Wing T urnbuc kl.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15488 WLDMT . HINGE ROD 318-017H 1. HHCS 3/8-16X1 1/2 GR5 802-022C 2. NUT HEX T OP LOCK 1-8 PL T 803-168C 3. S/N 222150+ HHCS 1-8X5 1/2 GR5 802-205C 4. S/N 222149- HHCS 1-8X5 GR5 802-235C 4.
15376 26 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 4: Axles RC5010 & RC6010 SERIES (540 RPM) Axle Center Dual.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15376 (S/N 419601-) SP ACER 1 1/2OD X .234W X 1 318-085D 1. Rev . 2 not compat. w/Rev . 1. (S/N 222150+) HHCS 1-8X5 1/2 GR5 802-205C 2. Rev . 1 (S/N 222149-) HHCS 1-8X5 GR5 802-235C 2.
23962 28 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 4: Axles RC5010 & RC6010 SERIES (540 RPM) Axle Center Dual.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg23962 HHCS 1-8X5 1/2 GR5 802-205C 1. HHCS 1-8X9 GR5 802-110C 2. NUT HEX T OP LOCK 1-8 PL T 803-168C 3. HUB GREASE CAP 200-001D 4. NUT HEX SLO TTED 3/4-16 803-053C 5. W ASHER HARDENED .
15384 30 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 4: Axles RC5010 & RC6010 SERIES (540 RPM) Axle Center Sing.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15384 21LAMINA TED TIRE SGL. P ACKA GE 318-043A 15WHEEL RIM SGL. P ACKA GE 318-044A AIRPLANE TIRE SGL. AXLE 318-045A (S/N 419601-) SP ACER 1 1/2OD X .234W X 1 318-085D 1. Rev .
16608 32 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 4: Axles RC5010 & RC6010 SERIES (540 RPM) Axle Right Hand .
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg16608 Includes items 2 through 15 ASSY . RH. AXLE 318-050L (S/N 223259-) WLDMT . WING AXLE RH. 318-010H 1. NUT HEX T OP LOCK 1-8 PL T 803-168C 2. HHCS 1-8X6 GR5 802-357C 3. HUB GREASE CAP 200-001D 4.
23963 34 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 4: Axles RC5010 & RC6010 SERIES (540 RPM) Axle Right Hand .
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg23963 NUT HEX T OP LOCK 1-8 PL T 803-168C 1. HHCS 1-8X6 GR5 802-357C 2. HUB GREASE CAP 200-001D 3. NUT HEX SLO TTED 3/4-16 803-053C 4. W ASHER HARDENED .81ID 804-216C 5. BEARING CONE LM-67048 822-021C 6.
22084 36 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 4: Axles RC5010 & RC6010 SERIES (540 RPM) Axle T andem Cen.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg22084 HUB GREASE CAP 200-001D 1. WLDMT . CENTER AXLE 318-571H 2. WLDMT . T ANDEM ARM 318-573H 3. Optional WLDMT . PVT . PIN W ALKING T ANDEM 318-855H 4. GREASE ZERK STRAIGHT 1/4-28 800-001C 5.
23964 38 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 4: Axles RC5010 & RC6010 SERIES (540 RPM) Axle T andem Cen.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg23964 HUB GREASE CAP 200-001D 1. Added Hardened Bushings WLDMT . CENTER AXLE 318-571H 2. WLDMT . T ANDEM ARM 318-573H 3. Optional WLDMT . PVT . PIN W ALKING T ANDEM 318-966H 4.
16604 40 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Guards RC5010 & RC6010 SERIES (540 RPM) Guar d W eight .
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg16604 (S/N 292792+) ASSY . FRT .CG.WT .BO X RH.WING 318-354K (S/N 292791-) ASSY . FRT .CG.WT .BO X RH.WING 318-110K HHCS 1/2-13X1 1/2 GR8 802-629C 1. (S/N 292791-) CHAINGU ARD MOUNTING PLA TE LH.
16605 42 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Guards RC5010 & RC6010 SERIES (540 RPM) Guar d W eight .
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg16605 Includes items 1 through 5 ASSY . REAR CHAINGU ARD 318-111K NUT HEX WHIZ 3/8-16 PL T 803-198C 1. R OUND ROD 1/4 X 10 318-105D 2. REAR CHAINGU ARD 318-158D 3. CHAIN WELD 5/16 PROOF X 5 LIN 890-341C 4.
15410 44 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Guards RC5010 & RC6010 SERIES (540 RPM) Guar ds Center .
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15410 CHAIN WELD 5/16 PROOF X 7-LINK 890-393C 1. NUT HEX WHIZ 1/2-13 PL T 803-037C 2. RHSNB 1/2-13X1 1/4 GR5 802-214C 3. CG. FRONT CTR. LH.OUTER 318-098D 4. ROUND ROD 1/4 X 22 318-113D 5.
19019 46 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Guards RC5010 & RC6010 SERIES (540 RPM) Guar ds Center .
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg19019 CHAIN WELD 5/16 PROOF X 7-LINK 890-393C 1. NUT HEX WHIZ 1/2-13 PL T 803-037C 2. RHSNB 1/2-13X1 1/4 GR5 802-214C 3. RC5015 CEN CHAINGU ARD LH 318-331D 4. ROUND R OD 1/4 X 25 318-337D 5.
22135 48 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Guards RC5010 & RC6010 SERIES (540 RPM) Guar ds Center .
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg22135 CHAIN WELD 5/16 PROOF X 7-LINK 890-393C 1. NUT HEX WHIZ 1/2-13 PL T 803-037C 2. RHSNB 1/2-13X1 1/4 GR5 802-214C 3. RC5015 CEN CHAINGU ARD LH 318-331D 4. ROUND R OD 1/4 X 25 318-337D 5.
15690 50 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Guards RC5010 & RC6010 SERIES (540 RPM) Guar ds Center .
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15690 ASSY . DBL.CG.FRT .CTR. RH.OUTER 318-066K 1. ASSY . DBL.CG.FRT .CENTER 318-065K 2. ASSY . DBL.CG.FRT .CTR. LH.OUTER 318-097K 3. ASSY . CG. REAR CENTER OUTER 318-071K 4.
19020 52 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Guards RC5010 & RC6010 SERIES (540 RPM) Guar ds Center .
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg19020 ASSY . DBL. CG. FRT . CTR. RH. 318-325K 1. ASSY . DBL. CG. FRT . CTR. 318-324K 2. ASSY . DBL. CG. FRT . CTR. LH. 318-326K 3. ASSY . CG. REAR CENTER OUTER 318-071K 4. ASSY .
22136 54 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Guards RC5010 & RC6010 SERIES (540 RPM) Guar ds Center .
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg22136 ASSY . DBL. CG. FRT . CTR. RH. 318-325K 1. ASSY . DBL. CG. FRT . CTR. 318-324K 2. ASSY . DBL. CG. FRT . CTR. LH. 318-326K 3. NUT HEX WHIZ 1/2-13 PL T 803-037C 4. NUT HEX WHIZ 3/8-16 PL T 803-198C 5.
16609 56 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Guards RC5010 & RC6010 SERIES (540 RPM) Guar ds Right H.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg16609 ROUND R OD 1/4 X 28 1/2 318-106D 1. CHAIN WELD 5/16 PROOF X 7-LINK 890-393C 2. NUT HEX WHIZ 1/2-13 PL T 803-037C 3. RHSNB 1/2-13X1 1/4 GR5 802-214C 4. CG. WING FRONT INNER 318-099D 5.
22163 58 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Guards RC5010 & RC6010 SERIES (540 RPM) Guar ds Right H.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg22163 ROUND R OD 1/4 X 73 318-336D 1. CHAIN WELD 5/16 PROOF X 7-LINK 890-393C 2. NUT HEX WHIZ 1/2-13 PL T 803-037C 3. RHSNB 1/2-13X1 1/4 GR5 802-214C 4. Includes items 1, 2, 4, 5 & 9 ASSY .
23952 60 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 6: Drivelines RC5010 & RC6010 SERIES (540 RPM) Driveline C.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg23952 PT O E60 X 21.7 1280NM CLUTCH 826-478C COMER Y OKE COMPLETE 141.026.357.1 1. COMER CROSS ASSEMBL Y 180.016.130 2. COMER Y OKE, OUTER 170.016.630.1 3. COMER SHAFT , SPLINED 155.
15570 62 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 6: Drivelines RC5010 & RC6010 SERIES (540 RPM) Driveline C.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15570 PT O INT . CA T .4 540W/CLUTCH 826-183C * Includes items 7, 8 & 9 EC BOL T ASSY KIT 6761280 Y OKE ASSEMBL Y (TRACT OR END) 1106525 1. CROSS ASSEMBL Y 1006020 2. OUTER TUBE Y OKE 1706027 3.
16965 64 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 6: Drivelines RC5010 & RC6010 SERIES (540 RPM) Driveline C.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg16965 PT O INT . W2500/WSC CA T5 540 826-260C WS Y OKE 1 3/4-20 SPL.I.C. 2500 325027 1. WS CR OSS & BEARING KIT 2500 312209 2. WS INBOARD Y OKE 2500 097140 3. WS SPRING PIN 10 X 90 304046 4.
18548 66 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 6: Drivelines RC5010 & RC6010 SERIES (540 RPM) Driveline Con v .
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg18548 PT O 2500 X 39.76 NO CLUTCH 826-112C WS Y OKE 1 3/4-20 SPL.I.C. 2500 325027 1. WS Y OKE 1 3/8-6 SPL Q.D . 2500 097136 2. WS CR OSS & BEARING KIT 2500 312209 3. WS INBOARD Y OKE 2500 097140 4.
16736 68 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 6: Drivelines RC5010 & RC6010 SERIES (540 RPM) Driveline Con v .
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg16736 RPBY 826-112C 826-188C EC TUBE BEARING (INNER TUBE) 1786711 1. EC STIFFENING RING 1215733 2. EC ST ANDARD CONE 1885703 3. EC ST OP RING 1215735 4. EC SAFETY SLEEVE 1885709 5.
15569 70 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 6: Drivelines RC5010 & RC6010 SERIES (540 RPM) Driveline Con v .
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15569 RPBY 826-112C 826-188C EC CROSS ASSEMBL Y 1006020 1. EC TUBE BEARING (OLD STYLE) 1786009 2. EC INNER TUBE Y OKE 1706029 3. EC 10X80-DIN-1481 O/TUBE R/PIN 6331080 4. EC INNER TUBE (1526084) 840MM 1526085 5.
26857 72 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 6: Drivelines RC5010 & RC6010 SERIES (540 RPM) Driveline C.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg26857 PT O CV 2580 X 41.73 826-117C WS Y OKE 1 3/4-20 SPL.I.C. 2500 325027 1. WS Y OKE 1 3/8-6 SPL 363617 2. WS GREASE ZERK 020672 3. WS DOUBLE Y OKE 2500 365725 4. WS CROSS & BEARING KIT 2500 384316 5.
16732 74 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 6: Drivelines RC5010 & RC6010 SERIES (540 RPM) Driveline C.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg16732 RPBY 826-117C 826-181C EC TUBE BEARING (INNER TUBE) 1786711 1. EC STIFFENING RING 1215733 2. EC ST ANDARD CONE 1885703 3. EC ST OP RING 1215735 4. EC SAFETY SLEEVE 1885709 5.
15512 76 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 6: Drivelines RC5010 & RC6010 SERIES (540 RPM) Driveline C.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15512 RPBY 826-117C 826-181C Rev . 2 Service only EC CV JOINT 1 3/8-6 SPLINE 7106622 1. Rev . 1 RPBY 7106622 7600602 1. EC 10X80-DIN-1481 O/TUBE R/PIN 6331080 2. EC SOFT CONE 1886528 3.
19897 78 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 6: Drivelines RC5010 & RC6010 SERIES (540 RPM) Driveline C.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg19897 Driveline CV W alterscheid (540 RPM) 826-336C WS Y OKE 1 3/8-6 SPL 363617 1. WS DOUBLE Y OKE 2500 365725 2. WS GREASE ZERK 020672 3. WS INBOARD Y OKE S4 331573 4. WS CROSS & BEARING KIT 2500 384316 5.
23947 80 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 6: Drivelines RC5010 & RC6010 SERIES (540 RPM) Driveline C.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg23947 PT O CV V80 X 54.8 NO CLUTCH 826-476C * COMER COLLER Y OKE ASSEMBL Y 141.028.358.1 1. COMER CV -JOINT CROSS ASSEMBL Y 180.018.158 2. COMER WIDE ANGLE DOUBLE Y OKE 141.028.
23994 82 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 6: Drivelines RC5010 & RC6010 SERIES (540 RPM) Driveline C.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg23994 Service Only EC 1 3/8" Z6PULL COLLAR 7106622 EC PULL TYPE Y OKE 1006875 1. EC GO6 CROSS ASSEMBL Y 1006830 2. EC HOMOKINETIC JOINT 1006831 3. EC OUTER TUBE HOMOKINETIC Y OKE 1006827 4.
15513 84 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 6: Drivelines RC5010 & RC6010 SERIES (540 RPM) Driveline C.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15513 EC CV JOINT 1 3/8-6 SPLINE 7600602 EC Y OKE ASSY . 1 3/8-6 SPLINE 1000618 1. EC EC SPIDER ASSEMBL Y 1000630 2. EC SEMI MALE SUPPORT 1700600 3. EC BEARING RING 1700603 4.
23957 86 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 6: Drivelines RC5010 & RC6010 SERIES (540 RPM) Driveline Slip Clutch (146.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg23957 COMER CLUTCH, COMPLETE ASSY 146.264.024.1 * COMER SPRING 180.014.022 1. COMER Y OKE, FLANGED 151.016.037.1 2. COMER BUSH 180.019.019 3. COMER LINING RING 180.019.018 4.
23958 88 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 6: Drivelines RC5010 & RC6010 SERIES (540 RPM) Driveline Slip Clutch (146.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg23958 COMER CLUTCH, DISC COMPLETE 146.284.020.1 * COMER SPRING 180.014.022 1. COMER Y OKE, FLANGED 151.018.016.1 2. COMER BUSH 180.019.019 3. COMER LINING RING 180.019.018 4.
17005 90 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 6: Drivelines RC5010 & RC6010 SERIES (540 RPM) Driveline S.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg17005 WS FRICTION CLUTCH 383805 WS CLUTCH HOUSING 324822 1. WS FRICTION DISK 168556 2. WS HUB 1 3/4"-20 SPL 351793 3. WS DRIVE PLA TE 042454 4. WS DRIVE PLA TE 042459 5.
16947 92 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 6: Drivelines RC5010 & RC6010 SERIES (540 RPM) Driveline S.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg16947 WS FRICTION CLUTCH 391708 WS CLUTCH HOUSING 324822 1. WS FRICTION DISK 168556 2. WS HUB 1-3/4"-20 SPL 391358 3. WS DRIVE PLA TE 042454 4. WS DRIVE PLA TE 042459 5.
15521 94 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 6: Drivelines RC5010 & RC6010 SERIES (540 RPM) Driveline S.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15521 EC CLUTCH FD4/6 1 3/4 20 SPL 1446016 * RPBY 330-297A 1215012 1. EC CLUTCH Y OKE W/FLANGE 1706033 2. EC CLUTCH BUSHING 1705009 3. EC CLUTCH LINING RING 1808010 4. EC CLUTCH MIDDLE DISK 1708034 5.
23996 96 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 6: Drivelines RC5010 & RC6010 SERIES (540 RPM) Driveline W.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg23996 PT O CA T .4 W/CLUTCH 1 3/4-20 826-185C * EC TUBE BEARING (INNER TUBE) 1786711 1. EC STIFFENING RING 1215733 2. EC SHORT CONE 1885702 3. EC ST OP RING 1215735 4. EC SAFETY SLEEVE 1885709 5.
15567 98 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 6: Drivelines RC5010 & RC6010 SERIES (540 RPM) Driveline W.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15567 PT O CA T .4 W/CLUTCH 1 3/4-20 826-185C EC CROSS ASSEMBL Y 1006020 1. EC TUBE BEARING 1786009 2. EC INNER TUBE Y OKE 1706029 3. EC 10X80-DIN-1481 O/TUBE R/PIN 6331080 4.
17004 100 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 6: Drivelines RC5010 & RC6010 SERIES (540 RPM) Driveline .
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg17004 PT O W2500/WSC CA T5 540/1000 826-262C WS LOCK NUT M16 304011 1. WS HEX BOL T M16 X 90 GR 8.8 702352 2. WS Y OKE 1 3/4-20 SPL.I.C. 2500 325027 3. WS CROSS & BEARING KIT 2500 312209 4.
23953 102 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 6: Drivelines RC5010 & RC6010 SERIES (540 RPM) Driveline .
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg23953 PT O V80 X 59.3 1280NM CLUTCH 826-481C COMER Y OKE COMPLETE 141.028.195.1 1. COMER CROSS ASSEMBL Y 180.018.004 2. COMER Y OKE OUTER 151.018.241.1 3. COMER OUTER TUBE ROLL PIN 190.
15500 104 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 7: Gearbox es RC5010 & RC6010 SERIES (540 RPM) Gearbo x 5.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15500 REPLACE BY 318-559S 826-174C RC6010 GBO X RC130L 1.75-20 1:1.46 CW 826-231C RC5010 (826-174C) OMNI HOUSING RC130S CW 010156 1. RC6010 (826-231C) OMNI HOUSING RC-130LS 010167 1.
15506 106 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 7: Gearbox es RC5010 & RC6010 SERIES (540 RPM) Gearbo x 5.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15506 RC5010 GBO X RC130S 1.75-20 1:1.46 CCW 826-175C RC6010 GBO X RC130L 1.75-20 1:1.46 CCW 826-232C RC5010 (826-175C) OMNI HOUSING RC130C CCW 010157 1. RC6010 (826-232C) OMNI HOUS.
21167 108 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 7: Gearbox es RC5010 & RC6010 SERIES (540 RPM) Gearbo x 5.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg21167 GBO X RC50 1.75-20 1:1.46 CCW 826-315C GBO X RC60 1.75-20 1:1.46 CCW 826-320C RC5010 (826-315C) CO HOUSING U0.125.0531.00 1. RC6010 (826-320C) CO HOUSING U0.125.0532.00 1.
21266 110 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 7: Gearbox es RC5010 & RC6010 SERIES (540 RPM) Gearbo x 5.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg21266 RC5010 GBO X RC50 1.75-20 1:1.46 CCW 826-315C RC6010 GBO X RC60 1.75-20 1:1.46 CCW 826-320C RC5010 (826-315C) HOUSING 16571-01 1. RC6010 (826-320C) HOUSING 16572-01 1. BEVEL GEAR Z22 M8 17271-03 2.
21171 112 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 7: Gearbox es RC5010 & RC6010 SERIES (540 RPM) Gearbo x 5.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg21171 RC5010 GBO X RC50 1.75-20 1:1.46 CW 826-316C RC6010 GBO X RC60 1.75-20 1:1.46 CW 826-321C RC5010 (826-316C) CO HOUSING U0.125.0531.00 1. RC6010 (826-321C) CO HOUSING U0.
21267 114 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 7: Gearbox es RC5010 & RC6010 SERIES (540 RPM) Gearbo x 5.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg21267 RC5010 GBO X RC50 1.75-20 1:1.46 CW 826-316C RC6010 GBO X RC60 1.75-20 1:1.46 CW 826-321C RC5010 (826-316C) HOUSING 16571-01 1. RC6010 (826-321C) HOUSING 16571-01 1. BEVEL GEAR Z22 M8 17271-03 2.
19604 116 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 7: Gearbox es RC5010 & RC6010 SERIES (540 RPM) Gearbo x D.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg19604 DIV OMNI/CO 540RPM 1 3/4-20 826-179C CO BOL T M10 X 35 8.8 8.1.1.00109 1. TOP CO VER PLA TE 0.305.1300.00 2. CO BEARING 30209 RT A25 8.0.9.00143 3. CO SNAP RING 8.5.2.01772 4.
15503 118 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 7: Gearbox es RC5010 & RC6010 SERIES (540 RPM) Gearbo x D.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15503 DIV OMNI/CO 540RPM 1 3/4-20 826-179C OMNI HOUSING RCD101HD 010063 1. OMNI INPUT CAP 020162 2. OMIN CANTILEVERED OUTPUT CAP 020061 3. OMNI OUTPUT CAP 020110 4. OMNI PINION, 20T 030413 5.
15427 120 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 8: Hydraulics RC5010 & RC6010 SERIES (540 RPM) Hydraulic .
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15427 RC5010 & RCM5010 CYL 3X8X1.25 ROD (TIE) NO PINS 810-195C 1. RC6010 & RCM6010 CYL 3.5X8X1.25 ROD (TIE R OD) 810-162C 1. CP 3/4FORB MALE QD 811-394C 2. HH3/8R1 168 3/4MORB 3/4FJIC 811-619C 3.
25899 122 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 8: Hydraulics RC5010 & RC6010 SERIES (540 RPM) Hydraulic .
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg25899 CYL 2.5X12X1.25 ROD (TIE R OD) 810-150C * NUT HEX 3/8-16 PL T 803-014C 1. MON PISTON NUT 130556 2. LION PIN 134953 3. MON CLEVIS PIN COTTER 135995 4. SCREW SET SH 3/8-16X3/8 TYPE C 801-023C 5.
25900 124 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 8: Hydraulics RC5010 & RC6010 SERIES (540 RPM) Hydraulic .
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg25900 CYL 3.5X8X1.25 ROD (TIE R OD) 810-162C * NUT HEX 5/8-18 PL T 803-022C 1. MON PISTON NUT 130560 2. LION PIN 134953 3. MON CLEVIS PIN COTTER 135995 4. SCREW SET SH 3/8-16X3/8 TYPE C 801-023C 5.
25902 126 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 8: Hydraulics RC5010 & RC6010 SERIES (540 RPM) Hydraulic .
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg12345 CYL 3X12X1.25 ROD (TIE R OD) 810-312C * NUT HEX 1/2-13 PL T 803-020C 1. MON PISTON NUT 130560 2. SCREW SET SH 3/8-16X3/8 TYPE C 801-023C 3. PLUG 9/16-18UNF MORB SOCKET HD 186561 4.
12499 128 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 8: Hydraulics RC5010 & RC6010 SERIES (540 RPM) Hydraulic .
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg12499 CYL 3X8X1.25 ROD (TIE) NO PINS 810-624C * MW BASE 3 X 3/4 SAE ORB PORT 6M4166 1. MW TIE ROD NUT 2A0014 2. Only found in sealkit 17 O-RING 3. MW TIE ROD 3 X 8 CYLINDER 7M4316 4.
25896 130 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 8: Hydraulics RC5010 & RC6010 SERIES (540 RPM) Hydraulic .
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg25896 CYL 3X8X1.25 ROD (TIE) NO PINS 810-624C * NUT HEX 1/2-13 PL T 803-020C 1. MON PISTON NUT 130560 2. SCREW SET SH 3/8-16X3/8 TYPE C 801-023C 3. LION PLUG 3/4-16UNF SOCKET HD 186562 4.
12499 132 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 8: Hydraulics RC5010 & RC6010 SERIES (540 RPM) Hydraulic .
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg12499 RC(M)5010 CYL 3X8X1.25 R OD (TIE) NO PINS 810-195C MW BASE 3 X 3/4 SAE ORB POR T 6M4166 1. MW TIE ROD NUT 2A0014 2. Only found in seal kit 17 O-RING 3. MW TIE ROD 3 X 8 CYLINDER 7M4316 4.
11421 134 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 8: Hydraulics RC5010 & RC6010 SERIES (540 RPM) Hydraulic .
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg11421 RAC(M)6010 CYL 3.5X8X1.25 ROD (TIE ROD) 810-162C BASE CROSS 1D1509-4 1. TIE ROD NUT CR OSS 2A0236-9 2. Only availale in Seal Kit (#19) O-RING 3. TIE ROD CR OSS 2A0581-1325 4.
11421 136 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 8: Hydraulics RC5010 & RC6010 SERIES (540 RPM) Hydraulic .
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg11421 RC(M)6010 CYL 3.5X8X1.25 R OD (TIE ROD) 810-162C MW BASE (STD 1 PIN) 6M5142 1. MW TIE ROD NUT 2A0016 2. Only availab le in Seal Kit (#19) O-RING 3. MW ROD 7M5316 4. MW TUBE 3 1/2 X 8 CYLINDER 5M5116 5.
15572 138 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 8: Hydraulics RC5010 & RC6010 SERIES (540 RPM) Hydraulic .
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15572 RC(M)5010 CYL 2.5X12X1.25 R OD (TIE ROD) 810-150C BASE CROSS 1D1505-3 1. CROSS NUT , CLEVIS & TIE ROD 2A0235-6 2. Only found in seal kit 19 MW O-RING 3. TIE R OD CROSS 2A0578-1675 4.
15572 140 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 8: Hydraulics RC5010 & RC6010 SERIES (540 RPM) Hydraulic .
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15572 RC(M)5010 CYL 2.5X12X1.25 R OD (TIE ROD) 810-150C MW BASE 6M3118 1. MW NUT CLEVIS & TIE ROD 2A0012 2. Only found in seal kit 19 MW O-RING 3. MW TIE ROD 7M3320 4. MW TUBE 5M3120 5.
15572 142 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 8: Hydraulics RC5010 & RC6010 SERIES (540 RPM) Hydraulic .
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15572 RC(M)6010 CYL 3X12X1.25 R OD (TIE ROD) 810-312C BASE CROSS 1D1505-3 1. CROSS NUT ,CLEVIS AND TIE ROD 2A0235-6 2. Only found in seal kit 20. O-RING 3. TIE ROD CR OSS 2A0578-1675 4.
15242 144 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 8: Hydraulics RC5010 & RC6010 SERIES (540 RPM) Hydraulic .
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15242 RAC(M)6010 CYL 3X12X1.25 ROD (TIE ROD 810-312C MW CLEVIS STD . DUTY 1M6010 1. MW R OD 1-1/4 DIA. X 10 STROKE 2M4418 2. MW HEAD CAP 3X1-1/4 RD 9/16SAE 3M4410 3. MW PISTON 3 DIA.
19022 146 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 8: Hydraulics RC5010 & RC6010 SERIES (540 RPM) Hydraulic .
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg19022 RC5010 & RCM5010 CYL 2.5X12X1.25 ROD (TIE R OD) 810-150C 1. RC6010 & RCM6010 CYL 3X12X1.25 ROD (TIE ROD) 810-312C 1. OREL 1/32 9/16MJIC 9/16MORB 811-062C 2. VENT PLUG - 9/16-18 PLA TED 800-117C 3.
17563 148 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 9: Labels RC5010 & RC6010 SERIES (540 RPM) Label Placemen.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg17563 RC5010 DECAL P ACKA GE 318-142A RCM5010 DECAL P ACKA GE 318-143A DECAL W ARNING PINCH PT/CRUSH 818-045C 1. DECAL BLADE RO T A TION RC45180 818-268C 2. DECAL W ARNING OPERA TING ANGLE 818-276C 3.
15351 150 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 2: Hitch RCM5010 & RCM6010 SERIES (1000 RPM) Hitch Applie.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15351 Includes items 1 through 9 ASSY . T ONGUE 318-054L WLDMT . TONGUE CLEVIS 318-005H 1. SAFETY CHAIN 10000 LB 890-182C 2. HHCS 1-8X2 1/2 GR5 802-096C 3. W ASHER FLA T 1 USS 804-028C 4.
16969 152 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 3: Decks RCM5010 & RCM6010 SERIES (1000 RPM) Blade Carrie.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg16969 BLADE BOL 1 1/8-12X3 7/16 W/KY 802-277C 1. Standard Blade Quantity 2 per Center Section CUTTER BLADE 1/2X4X29 CCW 820-168C 2. Optional Blade Quantity 2 per Center Section CUTTER BLADE 1/2X4X29 LL CCW 820-188C 2.
15338 154 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 3: Decks RCM5010 & RCM6010 SERIES (1000 RPM) Dec k Center.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15338 ASSY . CENTER SECT . 1000 RPM 318-029L Includes items 26 par t no . 826-177C, 27, 33 & 34 ASSY . SUB CENTER SEC.1000 RPM 318-082S RPBY 318-148K 318-016H 1. NUT HEX WHIZ 1/2-13 PL T 803-037C 2.
16924 156 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 3: Decks RCM5010 & RCM6010 SERIES (1000 RPM) Dec k Center.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg16924 WLDMT . SKID SHOE LH. 318-146H 1. NUT HEX WHIZ 1/2-13 PL T 803-037C 2. HFS 1/2-13X2 GR8 802-456C 3. OMNI Gear Box W ASHER LOCK SPRING 3/4 PL T 804-023C 4. OMNI Gear Box HHCS 3/4-10X1 1/2 GR5 802-184C 5.
Revision Comments P ar t Description P ar t No. Ref. WLDMT . CENTER SECTION RED 318-568H83 29. RCM6015 WLDMT . CENTER SECTION W/DECK RINGS 318-931H 29. WLDMT . CENTER SECTION W/DECK RINGS GREEN 318-931H81 29. WLDMT . CENTER SECTION W/DECK RINGS RED 318-931H83 29.
This P age Intentionally Left Blank 02/03/09 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 159 T able of Contents P ar t Number Index Section 3: Decks Land Pride RCM5010 & RCM6010 .
16607 160 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 3: Decks RCM5010 & RCM6010 SERIES (1000 RPM) Dec k Wing R.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg16607 Includes items 7, 12, 13 par t no . 826-178C & 14 ASSY . SUB WING SEC.RH.1000 RPM 318-083S DEFLECT OR 318-087D 1. Rev . 2 not compat. w/Rev . 1 (S/N 292792+) RC5010 & RCM5010 WLDMT .
16606 162 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 3: Decks RCM5010 & RCM6010 SERIES (1000 RPM) W eight Bo x.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg16606 1475 lbs. Bo x (S/N 355736, 355738, 355740, & 369323+) 1150 lbs. Bo x (S/N 369322- except as noted) WLDMT WEIGHT BO X 318-107H 1. WLDMT WEIGHT BO X GREEN 318-107H81 1.
15488 164 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 3: Decks RCM5010 & RCM6010 SERIES (1000 RPM) Wing T urnbu.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15488 WLDMT . HINGE ROD 318-017H 1. HHCS 3/8-16X1 1/2 GR5 802-022C 2. NUT HEX T OP LOCK 1-8 PL T 803-168C 3. S/N 222150+ HHCS 1-8X5 1/2 GR5 802-205C 4. S/N 222149- HHCS 1-8X5 GR5 802-235C 4.
15376 166 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 4: Axles RCM5010 & RCM6010 SERIES (1000 RPM) Axle Center .
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15376 (S/N 419601-) SP ACER 1 1/2OD X .234W X 1 318-085D 1. Rev . 2 not compat. w/Rev . 1. (S/N 222150+) HHCS 1-8X5 1/2 GR5 802-205C 2. Rev . 1 (S/N 222149-) HHCS 1-8X5 GR5 802-235C 2.
23962 168 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 4: Axles RCM5010 & RCM6010 SERIES (1000 RPM) Axle Center .
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg23962 HHCS 1-8X5 1/2 GR5 802-205C 1. HHCS 1-8X9 GR5 802-110C 2. NUT HEX T OP LOCK 1-8 PL T 803-168C 3. HUB GREASE CAP 200-001D 4. NUT HEX SLO TTED 3/4-16 803-053C 5. WASHER HARDENED .
15384 170 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 4: Axles RCM5010 & RCM6010 SERIES (1000 RPM) Axle Center .
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15384 21LAMINA TED TIRE SGL. P ACKA GE 318-043A 15WHEEL RIM SGL. P ACKA GE 318-044A AIRPLANE TIRE SGL. AXLE 318-045A (S/N 419601-) SP ACER 1 1/2OD X .234W X 1 318-085D 1. Rev .
16608 172 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 4: Axles RCM5010 & RCM6010 SERIES (1000 RPM) Axle Right H.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg16608 Includes items 2 through 15 ASSY . RH. AXLE 318-050L (S/N 223259-) WLDMT . WING AXLE RH. 318-010H 1. NUT HEX TOP LOCK 1-8 PL T 803-168C 2. HHCS 1-8X6 GR5 802-357C 3. HUB GREASE CAP 200-001D 4.
23963 174 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 4: Axles RCM5010 & RCM6010 SERIES (1000 RPM) Axle Right H.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg23963 NUT HEX T OP LOCK 1-8 PL T 803-168C 1. HHCS 1-8X6 GR5 802-357C 2. HUB GREASE CAP 200-001D 3. NUT HEX SLO TTED 3/4-16 803-053C 4. WASHER HARDENED .81ID 804-216C 5. BEARING CONE LM-67048 822-021C 6.
22084 176 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 4: Axles RCM5010 & RCM6010 SERIES (1000 RPM) Axle T andem.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg22084 HUB GREASE CAP 200-001D 1. WLDMT . CENTER AXLE 318-571H 2. WLDMT . T ANDEM ARM 318-573H 3. Optional WLDMT . PVT . PIN W ALKING T ANDEM 318-855H 4. GREASE ZERK STRAIGHT 1/4-28 800-001C 5.
23964 178 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 4: Axles RCM5010 & RCM6010 SERIES (1000 RPM) Axle T andem.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg23964 HUB GREASE CAP 200-001D 1. Added Hardened Bushings WLDMT . CENTER AXLE 318-571H 2. WLDMT . T ANDEM ARM 318-573H 3. Optional WLDMT . PVT . PIN W ALKING T ANDEM 318-966H 4.
16604 180 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Guards RCM5010 & RCM6010 SERIES (1000 RPM) Guar d W ei.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg16604 (S/N 292792+) ASSY . FRT .CG.WT .BO X RH.WING 318-354K (S/N 292791-) ASSY . FRT .CG.WT .BO X RH.WING 318-110K HHCS 1/2-13X1 1/2 GR8 802-629C 1. (S/N 292791-) CHAINGU ARD MOUNTING PLA TE LH.
16605 182 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Guards RCM5010 & RCM6010 SERIES (1000 RPM) Guar d W ei.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg16605 Includes items 1 through 5 ASSY . REAR CHAINGU ARD 318-111K NUT HEX WHIZ 3/8-16 PL T 803-198C 1. ROUND ROD 1/4 X 10 318-105D 2. REAR CHAINGU ARD 318-158D 3. CHAIN WELD 5/16 PROOF X 5 LIN 890-341C 4.
15410 184 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Guards RCM5010 & RCM6010 SERIES (1000 RPM) Guar ds Cen.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15410 CHAIN WELD 5/16 PROOF X 7-LINK 890-393C 1. NUT HEX WHIZ 1/2-13 PL T 803-037C 2. RHSNB 1/2-13X1 1/4 GR5 802-214C 3. CG. FRONT CTR. LH.OUTER 318-098D 4. ROUND ROD 1/4 X 22 318-113D 5.
19019 186 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Guards RCM5010 & RCM6010 SERIES (1000 RPM) Guar ds Cen.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg19019 CHAIN WELD 5/16 PROOF X 7-LINK 890-393C 1. NUT HEX WHIZ 1/2-13 PL T 803-037C 2. RHSNB 1/2-13X1 1/4 GR5 802-214C 3. RC5015 CEN CHAINGU ARD LH 318-331D 4. ROUND R OD 1/4 X 25 318-337D 5.
22135 188 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Guards RCM5010 & RCM6010 SERIES (1000 RPM) Guar ds Cen.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg22135 CHAIN WELD 5/16 PROOF X 7-LINK 890-393C 1. NUT HEX WHIZ 1/2-13 PL T 803-037C 2. RHSNB 1/2-13X1 1/4 GR5 802-214C 3. RC5015 CEN CHAINGU ARD LH 318-331D 4. ROUND R OD 1/4 X 25 318-337D 5.
15690 190 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Guards RCM5010 & RCM6010 SERIES (1000 RPM) Guar ds Cen.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15690 ASSY . DBL.CG.FRT .CTR. RH.OUTER 318-066K 1. ASSY . DBL.CG.FRT .CENTER 318-065K 2. ASSY . DBL.CG.FRT .CTR. LH.OUTER 318-097K 3. ASSY . CG. REAR CENTER OUTER 318-071K 4.
19020 192 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Guards RCM5010 & RCM6010 SERIES (1000 RPM) Guar ds Cen.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg19020 ASSY . DBL. CG. FRT . CTR. RH. 318-325K 1. ASSY . DBL. CG. FRT . CTR. 318-324K 2. ASSY . DBL. CG. FRT . CTR. LH. 318-326K 3. ASSY . CG. REAR CENTER OUTER 318-071K 4. ASSY .
22136 194 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Guards RCM5010 & RCM6010 SERIES (1000 RPM) Guar ds Cen.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg22136 ASSY . DBL. CG. FRT . CTR. RH. 318-325K 1. ASSY . DBL. CG. FRT . CTR. 318-324K 2. ASSY . DBL. CG. FRT . CTR. LH. 318-326K 3. NUT HEX WHIZ 1/2-13 PL T 803-037C 4. NUT HEX WHIZ 3/8-16 PL T 803-198C 5.
16609 196 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Guards RCM5010 & RCM6010 SERIES (1000 RPM) Guar ds Rig.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg16609 ROUND R OD 1/4 X 28 1/2 318-106D 1. CHAIN WELD 5/16 PROOF X 7-LINK 890-393C 2. NUT HEX WHIZ 1/2-13 PL T 803-037C 3. RHSNB 1/2-13X1 1/4 GR5 802-214C 4. CG. WING FRONT INNER 318-099D 5.
22163 198 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Guards RCM5010 & RCM6010 SERIES (1000 RPM) Guar ds Rig.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg22163 ROUND R OD 1/4 X 73 318-336D 1. CHAIN WELD 5/16 PROOF X 7-LINK 890-393C 2. NUT HEX WHIZ 1/2-13 PL T 803-037C 3. RHSNB 1/2-13X1 1/4 GR5 802-214C 4. Includes items 1, 2, 4, 5 & 9 ASSY .
23952 200 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 6: Drivelines RCM5010 & RCM6010 SERIES (1000 RPM) Driveli.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg23952 PT O E60 X 21.7 1280NM CLUTCH 826-478C COMER Y OKE COMPLETE 141.026.357.1 1. COMER CROSS ASSEMBL Y 180.016.130 2. COMER Y OKE, OUTER 170.016.630.1 3. COMER SHAFT , SPLINED 155.
15497 202 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 6: Drivelines RCM5010 & RCM6010 SERIES (1000 RPM) Driveli.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15497 PT O INT . CA T .4 1000W/CLUTCH 826-184C * Includes items 7, 8 & 9 EC BOL T ASSY KIT 6761280 EC Y OKE ASSEMBL Y (TRACT . END) 1106525 1. EC CR OSS ASSEMBL Y 1006020 2.
26867 204 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 6: Drivelines RCM5010 & RCM6010 SERIES (1000 RPM) Driveli.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg26867 RPBY 826-478C 826-261C * WS Y OKE 1 3/4-20 SPL.I.C. 2500 325027 1. WS CR OSS & BEARING KIT 2500 312209 2. WS INBOARD Y OKE 2500 97140 3. WS SPRING PIN 10 X 90 304046 4.
16736 206 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 6: Drivelines RCM5010 & RCM6010 SERIES (1000 RPM) Driveline Con v .
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg16736 RPBY 826-247C 826-189C EC TUBE BEARING (INNER TUBE) 1786711 1. EC STIFFENING RING 1215733 2. EC ST ANDARD CONE 1885703 3. EC ST OP RING 1215735 4. EC SAFETY SLEEVE 1885709 5.
26862 208 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 6: Drivelines RCM5010 & RCM6010 SERIES (1000 RPM) Driveline Con v .
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg26862 RPBY 826-247C 826-189C EC CROSS ASSEMBL Y 1006020 1. EC TUBE BEARING (OLD STYLE) 1786009 2. EC INNER TUBE Y OKE 1706029 3. EC 10X80-DIN-1481 O/TUBE R/PIN 6331080 4. EC INNER TUBE (1526084) 840MM 1526085 5.
18549 210 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 6: Drivelines RCM5010 & RCM6010 SERIES (1000 RPM) Driveline Con v .
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg18549 PT O 2500 CA T .5 1000 1 3/8-21 826-247C WS Y OKE 1 3/4-20 SPL.I.C . 2500 325027 1. WS Y OKE 1 3/8-21 SPL. AS 362430 2. WS CROSS & BEARING KIT 2500 312209 3. WS INBOARD Y OKE 2500 097140 4.
12382 212 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 6: Drivelines RCM5010 & RCM6010 SERIES (1000 RPM) Driveli.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg12382 RPBY 826-244C 826-118C WS Y OKE 1 3/4-20 SPL.I.C. 2500 331053 1. WS Y OKE 1 3/8-21 SPL 380883 2. WS GREASE ZERK 020672 3. WS DOUBLE Y OKE 365722 4. WS CROSS & BEARING KIT 342221 5.
26866 214 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 6: Drivelines RCM5010 & RCM6010 SERIES (1000 RPM) Driveli.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg26866 RPBY 826-244C 826-182C EC TUBE BEARING (INNER TUBE) 1786711 1. EC STIFFENING RING 1215733 2. EC ST ANDARD CONE 1885703 3. EC ST OP RING 1215735 4. EC SAFETY SLEEVE 1885709 5.
26861 216 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 6: Drivelines RCM5010 & RCM6010 SERIES (1000 RPM) Driveli.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg26861 RPBY 826-244C 826-182C Rev . 2 Service Only EC CV JOINT 1 3/8-21 SPLINE 7106632 1. Rev . 1 RPBY 7106632 7600621 1. EC 10X80-DIN-1481 O/TUBE R/PIN 6331080 2. EC SOFT CONE 1886528 3.
14067 218 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 6: Drivelines RCM5010 & RCM6010 SERIES (1000 RPM) Driveli.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg14067 PT O CV 2580 CA T5 1000 1 3/8-21 826-244C WS Y OKE 1 3/4-20 SPL.I.C. 2500 325027 1. WS Y OKE 1 3/8-21 SPL. AS 363696 2. WS GREASE ZERK 020672 3. WS DOUBLE Y OKE 2500 365725 4.
26858 220 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 6: Drivelines RCM5010 & RCM6010 SERIES (1000 RPM) Driveli.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg26858 PT O CV 2580 CA T5 1000 1 3/4-20 826-245C WS Y OKE 1 3/4-20 SPL.I.C. 2500 325027 1. WS CV Y OKE 1 3/4-20 SPL 363729 2. WS GREASE ZERK 020672 3. WS DOUBLE Y OKE 2500 365725 4.
23948 222 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 6: Drivelines RCM5010 & RCM6010 SERIES (1000 RPM) Driveli.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg23948 PT O CV V80X56.8 NO/CL 1 3/8-21 826-477C * COMER CV -JOINT Y OKE COLLER 141.028.359.1 1. COMER CV -JOINT CROSS ASSEMBL Y 180.018.158 2. COMER WIDE ANGLE DOUBLE Y OKE 141.
23960 224 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 6: Drivelines RCM5010 & RCM6010 SERIES (1000 RPM) Driveli.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg23960 PT O CV80 X 77.71 NO CLUTCH 826-499C COMER COLLER Y OKE ASSEMBL Y 141.028.360.1 1. COMER CV -JOINT CROSS ASSEMBL Y 180.018.158 2. COMER WIDE ANGLE DOUBLE Y OKE 141.028.
23995 226 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 6: Drivelines RCM5010 & RCM6010 SERIES (1000 RPM) Driveli.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg23995 Service Only EC CV JOINT 1 3/8-21 SPLINE 7106632 EC Y OKE W/QD 1006876 1. EC GO6 CR OSS ASSEMBL Y 1006830 2. EC HOMOKINETIC JOINT 1006831 3. EC OUTER TUBE HOMOKINETIC Y OKE 1006827 4.
15513 228 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 6: Drivelines RCM5010 & RCM6010 SERIES (1000 RPM) Driveli.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15513 EC CV JOINT 1 3/8-21 SPLINE 7600621 EC Y OKE ASSY . 1 3/8-21 SPLINE 1000619 1. Optional Y oke EC Y OKE ASSY 1 3/4-20 SPLINE 1000621 1. EC EC SPIDER ASSEMBL Y 1000630 2.
23957 230 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 6: Drivelines RCM5010 & RCM6010 SERIES (1000 RPM) Driveline Slip Clutch (146.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg23957 COMER CLUTCH, COMPLETE ASSY 146.264.024.1 * COMER SPRING 180.014.022 1. COMER Y OKE, FLANGED 151.016.037.1 2. COMER BUSH 180.019.019 3. COMER LINING RING 180.019.018 4.
23958 232 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 6: Drivelines RCM5010 & RCM6010 SERIES (1000 RPM) Driveline Slip Clutch (146.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg23958 COMER CLUTCH, DISC COMPLETE 146.284.020.1 * COMER SPRING 180.014.022 1. COMER Y OKE, FLANGED 151.018.016.1 2. COMER BUSH 180.019.019 3. COMER LINING RING 180.019.018 4.
17005 234 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 6: Drivelines RCM5010 & RCM6010 SERIES (1000 RPM) Driveli.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg17005 WS FRICTION CLUTCH 383805 WS CLUTCH HOUSING 324822 1. WS FRICTION DISK 168556 2. WS HUB 1 3/4"-20 SPL 351793 3. WS DRIVE PLA TE 042454 4. WS DRIVE PLA TE 042459 5.
15523 236 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 6: Drivelines RCM5010 & RCM6010 SERIES (1000 RPM) Driveli.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15523 EC CLUTCH FD2/6 1 3/4 20 SPL 1406016 EC CLUTCH SPRING 1215012 1. EC CLUTCH Y OKE W/FLANGE 1706033 2. EC CLUTCH BUSHING 1705009 3. EC CLUTCH LINING RING 1808010 4. EC HUB WITH FLANGE 1708017 5.
16966 238 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 6: Drivelines RCM5010 & RCM6010 SERIES (1000 RPM) Driveli.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg16966 WS FRICTION CLUTCH 391359 WS CLUTCH HOUSING 324822 1. WS FRICTION DISK 168556 2. WS HUB 1-3/4"-20 SPL 391358 3. WS DRIVE PLA TE 042454 4. WS DRIVE PLA TE 042459 5.
15521 240 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 6: Drivelines RCM5010 & RCM6010 SERIES (1000 RPM) Driveli.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15521 EC CLUTCH FD4/6 1 3/4 20 SPL 1446016 * RPBY 330-297A 1215012 1. EC CLUTCH Y OKE W/FLANGE 1706033 2. EC CLUTCH BUSHING 1705009 3. EC CLUTCH LINING RING 1808010 4. EC CLUTCH MIDDLE DISK 1708034 5.
23996 242 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 6: Drivelines RCM5010 & RCM6010 SERIES (1000 RPM) Driveli.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg23996 PT O CA T .4 W/CLUTCH 1 3/4-20 826-185C * EC TUBE BEARING (INNER TUBE) 1786711 1. EC STIFFENING RING 1215733 2. EC SHORT CONE 1885702 3. EC ST OP RING 1215735 4. EC SAFETY SLEEVE 1885709 5.
15567 244 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 6: Drivelines RCM5010 & RCM6010 SERIES (1000 RPM) Driveli.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15567 PT O CA T .4 W/CLUTCH 1 3/4-20 826-185C EC CROSS ASSEMBL Y 1006020 1. EC TUBE BEARING 1786009 2. EC INNER TUBE Y OKE 1706029 3. EC 10X80-DIN-1481 O/TUBE R/PIN 6331080 4.
17004 246 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 6: Drivelines RCM5010 & RCM6010 SERIES (1000 RPM) Driveli.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg17004 PT O W2500/WSC CA T5 540/1000 826-262C WS LOCK NUT M16 304011 1. WS HEX BOL T M16 X 90 GR 8.8 702352 2. WS Y OKE 1 3/4-20 SPL.I.C. 2500 325027 3. WS CROSS & BEARING KIT 2500 312209 4.
23953 248 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 6: Drivelines RCM5010 & RCM6010 SERIES (1000 RPM) Driveli.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg23953 PT O V80 X 59.3 1280NM CLUTCH 826-481C COMER Y OKE COMPLETE 141.028.195.1 1. COMER CROSS ASSEMBL Y 180.018.004 2. COMER Y OKE OUTER 151.018.241.1 3. COMER OUTER TUBE ROLL PIN 190.
15510 250 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 7: Gearbox es RCM5010 & RCM6010 SERIES (1000 RPM) Gearbo .
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15510 RCM5010 GBO X RC130S 1.75-20 1.21:1 CW 826-177C RCM6010 GBO X RC130L 1.75-20 1.21:1 CW 826-234C RCM5010 (826-177C) OMNI HOUSING RC130S CW 010156 1. RCM6010 (826-234C) OMNI HOUSING RC-130LS 010167 1.
15511 252 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 7: Gearbox es RCM5010 & RCM6010 SERIES (1000 RPM) Gearbo .
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15511 RCM5010 GBO X RC130S 1.75-20 1:1.21 CCW 826-178C RCM6010 GBO X RC130L 1.75-20 1:1.21 CCW 826-235C RCM5010 (826-178C) OMNI HOUSING RC130C CCW 010157 1. RCM6010 (826-235C) OMNI HOUS.
21167 254 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 7: Gearbox es RCM5010 & RCM6010 SERIES (1000 RPM) Gearbo .
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg21167 RCM5010 (826-318C) CO HOUSING U0.125.0531.00 1. RCM6010 (826-323C) CO HOUSING U0.125.0532.00 1. CO CROWN GEAR Z18 M7.8 U0.125.6003.00 2. CO BEARING 30209 RT A25 8.0.9.00143 3.
21266 256 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 7: Gearbox es RCM5010 & RCM6010 SERIES (1000 RPM) Gearbo .
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg21266 RCM5010 GBO X RCM50 1.75-20 1.21:1 CCW 826-318C RCM6010 GBO X RCM60 1.75-20 1.21:1 CCW 826-323C RCM5010 (826-318C) HOUSING 16571-01 1. RCM6010 (826-323C) HOUSING 16572-01 1.
21171 258 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 7: Gearbox es RCM5010 & RCM6010 SERIES (1000 RPM) Gearbo .
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg21171 RCM5015 GBO X RCM50 1.75-20 1:1.21 CW 826-319C RCM6015 GBOX RCM60 1.75-20 1:1.21 CW 826-324C RCM5010 (826-319C) CO HOUSING U0.125.0531.00 1. RCM6010 (826-324C) CO HOUSING U0.
21267 260 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 7: Gearbox es RCM5010 & RCM6010 SERIES (1000 RPM) Gearbo .
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg21267 RCM5015 GBO X RCM50 1.75-20 1:1.21 CW 826-319C RCM6015 GBOX RCM60 1.75-20 1:1.21 CW 826-324C RCM5015 (826-319C) HOUSING 16571-01 1. RCM6015 (826-324C) HOUSING 16572-01 1.
26958 262 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 7: Gearbox es RCM5010 & RCM6010 SERIES (1000 RPM) Gearbo .
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg26958 DIV OMNI/CO 1000RPM 1 3/4-20 826-180C * CO BOL T M10 X 35 8.8 8.1.1.00109 1. T OP COVER PLA TE 0.305.1300.00 2. CO BEARING 30209 RT A25 8.0.9.00143 3. CO SNAP RING 8.5.
15504 264 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 7: Gearbox es RCM5010 & RCM6010 SERIES (1000 RPM) Gearbo .
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15504 DIV OMNI/CO 1000RPM 1 3/4-20 826-180C OMNI HOUSING RCD101HD 010063 1. OMNI INPUT CAP 020162 2. OMIN CANTILEVERED OUTPUT CAP 020061 3. OMNI OUTPUT CAP 020110 4. OMNI GEAR, 26T 030194 5.
15427 266 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 8: Hydraulics RCM5010 & RCM6010 SERIES (1000 RPM) Hydraul.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15427 RC5010 & RCM5010 CYL 3X8X1.25 ROD (TIE) NO PINS 810-195C 1. RC6010 & RCM6010 CYL 3.5X8X1.25 ROD (TIE R OD) 810-162C 1. CP 3/4FORB MALE QD 811-394C 2. HH3/8R1 168 3/4MORB 3/4FJIC 811-619C 3.
25899 268 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 8: Hydraulics RCM5010 & RCM6010 SERIES (1000 RPM) Hydraul.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg25899 CYL 2.5X12X1.25 ROD (TIE R OD) 810-150C * NUT HEX 3/8-16 PL T 803-014C 1. MON PISTON NUT 130556 2. LION PIN 134953 3. MON CLEVIS PIN COTTER 135995 4. SCREW SET SH 3/8-16X3/8 TYPE C 801-023C 5.
25900 270 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 8: Hydraulics RCM5010 & RCM6010 SERIES (1000 RPM) Hydraul.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg25900 CYL 3.5X8X1.25 ROD (TIE R OD) 810-162C * NUT HEX 5/8-18 PL T 803-022C 1. MON PISTON NUT 130560 2. LION PIN 134953 3. MON CLEVIS PIN COTTER 135995 4. SCREW SET SH 3/8-16X3/8 TYPE C 801-023C 5.
25902 272 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 8: Hydraulics RCM5010 & RCM6010 SERIES (1000 RPM) Hydraul.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg12345 CYL 3X12X1.25 ROD (TIE R OD) 810-312C * NUT HEX 1/2-13 PL T 803-020C 1. MON PISTON NUT 130560 2. SCREW SET SH 3/8-16X3/8 TYPE C 801-023C 3. PLUG 9/16-18UNF MORB SOCKET HD 186561 4.
12499 274 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 8: Hydraulics RCM5010 & RCM6010 SERIES (1000 RPM) Hydraul.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg12499 CYL 3X8X1.25 ROD (TIE) NO PINS 810-624C * MW BASE 3 X 3/4 SAE ORB PORT 6M4166 1. MW TIE ROD NUT 2A0014 2. Only found in sealkit 17 O-RING 3. MW TIE ROD 3 X 8 CYLINDER 7M4316 4.
25896 276 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 8: Hydraulics RCM5010 & RCM6010 SERIES (1000 RPM) Hydraul.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg25896 CYL 3X8X1.25 ROD (TIE) NO PINS 810-624C * NUT HEX 1/2-13 PL T 803-020C 1. MON PISTON NUT 130560 2. SCREW SET SH 3/8-16X3/8 TYPE C 801-023C 3. LION PLUG 3/4-16UNF SOCKET HD 186562 4.
12499 278 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 8: Hydraulics RCM5010 & RCM6010 SERIES (1000 RPM) Hydraul.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg12499 RC(M)5010 CYL 3X8X1.25 R OD (TIE) NO PINS 810-195C MW BASE 3 X 3/4 SAE ORB POR T 6M4166 1. MW TIE ROD NUT 2A0014 2. Only found in seal kit 17 O-RING 3. MW TIE ROD 3 X 8 CYLINDER 7M4316 4.
11421 280 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 8: Hydraulics RCM5010 & RCM6010 SERIES (1000 RPM) Hydraul.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg11421 RAC(M)6010 CYL 3.5X8X1.25 ROD (TIE ROD) 810-162C BASE CROSS 1D1509-4 1. TIE ROD NUT CROSS 2A0236-9 2. Only av ailale in Seal Kit (#19) O-RING 3. TIE ROD CR OSS 2A0581-1325 4.
11421 282 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 8: Hydraulics RCM5010 & RCM6010 SERIES (1000 RPM) Hydraul.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg11421 RC(M)6010 CYL 3.5X8X1.25 R OD (TIE ROD) 810-162C MW BASE (STD 1 PIN) 6M5142 1. MW TIE ROD NUT 2A0016 2. Only availab le in Seal Kit (#19) O-RING 3. MW ROD 7M5316 4. MW TUBE 3 1/2 X 8 CYLINDER 5M5116 5.
15572 284 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 8: Hydraulics RCM5010 & RCM6010 SERIES (1000 RPM) Hydraul.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15572 RC(M)5010 CYL 2.5X12X1.25 R OD (TIE ROD) 810-150C BASE CROSS 1D1505-3 1. CROSS NUT , CLEVIS & TIE ROD 2A0235-6 2. Only found in seal kit 19 MW O-RING 3. TIE ROD CR OSS 2A0578-1675 4.
15572 286 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 8: Hydraulics RCM5010 & RCM6010 SERIES (1000 RPM) Hydraul.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15572 RC(M)5010 CYL 2.5X12X1.25 R OD (TIE ROD) 810-150C MW BASE 6M3118 1. MW NUT CLEVIS & TIE ROD 2A0012 2. Only found in seal kit 19 MW O-RING 3. MW TIE ROD 7M3320 4. MW TUBE 5M3120 5.
15572 288 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 8: Hydraulics RCM5010 & RCM6010 SERIES (1000 RPM) Hydraul.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15572 RC(M)6010 CYL 3X12X1.25 R OD (TIE ROD) 810-312C BASE CROSS 1D1505-3 1. CROSS NUT ,CLEVIS AND TIE ROD 2A0235-6 2. Only found in seal kit 20. O-RING 3. TIE ROD CR OSS 2A0578-1675 4.
15242 290 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 8: Hydraulics RCM5010 & RCM6010 SERIES (1000 RPM) Hydraul.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15242 RAC(M)6010 CYL 3X12X1.25 ROD (TIE ROD 810-312C MW CLEVIS STD . DUTY 1M6010 1. MW R OD 1-1/4 DIA. X 10 STROKE 2M4418 2. MW HEAD CAP 3X1-1/4 RD 9/16SAE 3M4410 3. MW PISTON 3 DIA.
19022 292 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 8: Hydraulics RCM5010 & RCM6010 SERIES (1000 RPM) Hydraul.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg19022 RC5010 & RCM5010 CYL 2.5X12X1.25 ROD (TIE R OD) 810-150C 1. RC6010 & RCM6010 CYL 3X12X1.25 ROD (TIE ROD) 810-312C 1. OREL 1/32 9/16MJIC 9/16MORB 811-062C 2. VENT PLUG - 9/16-18 PLA TED 800-117C 3.
17563 294 RC5010, RCM5010, RC6010 & RCM6010 Rotary Cutters 318-622P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 9: Labels RCM5010 & RCM6010 SERIES (1000 RPM) Label Place.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg17563 RC5010 DECAL P ACKA GE 318-142A RCM5010 DECAL P ACKA GE 318-143A DECAL W ARNING PINCH PT/CRUSH 818-045C 1. DECAL BLADE RO T A TION RC45180 818-268C 2. DECAL W ARNING OPERA TING ANGLE 818-276C 3.
The P ar t Number Index is a numeric inde x of all par t numbers included in this manual. The index sho ws what page(s) the par t is used on. Pa g e Part Number 109, 113, 255, 259 0.121.7101.00 ........... 109, 113, 255, 259 0.252.7525.00 ........... 109, 113, 255, 259 0.
Pa g e Part Number 69, 75, 97, 207, 215, 243 1786711 .................... 111, 115, 257, 261 17871-01 ................... 87, 89, 231, 233 180.014.022 .............. 81, 103, 223, 225, 249 180.014.240 .............. 81, 103, 223, 225, 249 180.016.025 .
Pa g e Part Number 57, 197 318-136D ................... 45, 185 318-138D ................... 45, 185 318-139D ................... 57, 197 318-140D ................... 51, 191 318-141D ................... 149, 295 318-142A ................... 51, 191 318-142D .
Pa g e Part Number 69, 71, 75, 77, 97, 99, 203, 207, 6560508 .................... 209, 215, 217, 243, 245 95, 241 6691010 .................... 237 6691080 .................... 63, 203 6761280 .................... 97, 99, 243, 245 6761480 .............
Pa g e Part Number 27, 31, 33, 167, 171, 173 814-066C ................... 27, 31, 33, 167, 171, 173 814-086C ................... 27, 31, 33, 167, 171, 173 814-087C ................... 27, 31, 33, 167, 171, 173 814-088C ................... 27, 31, 33, 167, 171, 173 814-089C .
Pa g e Part Number 57, 197 dwg16609 .................. 75 dwg16732 .................. 69, 207 dwg16736 .................. 15, 157 dwg16924 .................. 93 dwg16947 .................. 65 dwg16965 .................. 239 dwg16966 ..................
Great Plains Manufacturing, Inc. Corporate Office: P .O. Box 5060 Salina, Kansas 67402-5060 USA www .landpride.com.
An important point after buying a device Land Pride RCM6010 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Land Pride RCM6010 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Land Pride RCM6010 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Land Pride RCM6010 you will learn all the available features of the product, as well as information on its operation. The information that you get Land Pride RCM6010 will certainly help you make a decision on the purchase.
If you already are a holder of Land Pride RCM6010, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Land Pride RCM6010.
However, one of the most important roles played by the user manual is to help in solving problems with Land Pride RCM6010. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Land Pride RCM6010 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
