Instruction/ maintenance manual of the product RC6015 Land Pride
Go to page of 336
Rotary Cutters RC5015, RCM5015, RC6015 & RCM6015 15678 318-047P Parts Manual Read the Operator's manual entirely . When you see this symbol, the subsequent instructions and warnings are serious - follow without exception.
Section 1: Introduction .................................................8 Using This Manual ...............................................................8 Manual Replacement Inf or mation .......................................8 Manual Re visions .
Hydraulic Wing Lift .....................................................148 Maunal Winch Wing Dec k Accessor y .........................150 Section 8: Labels ...................................................152 Label Placement .....................
Hydraulic Cylinder Wing (810-312C) Cross ....................304 Hydraulic Cylinder Wing (810-312C) Midwa y ..................306 Hydraulic Independent Wing Control Accessor y .............308 Hydraulic V alve Selector Assessor y .....................
RC5015 & RC6015 SERIES (540 RPM) A Axle Center Dual (S/N 489025-) ..................................26 Axle Center Dual (S/N 489026+) ..................................28 Axle Center Single (S/N 489025-) ................................30 Axle T andem Center Deck (S/N 419602 to 489025) .
RCM5015 & RCM6015 SERIES (1000 RPM) A Axle Center Dual (S/N 489025-) .....................................180 Axle Center Dual (S/N 489026+) ....................................182 Axle Center Single (S/N 489025-) .................................
S Shredder Kit Comer (S/N 235492+) ...........................324 Shredder Kit Omni (S/N 235491-) ..............................326 Shredder Kit Omni (S/N 235491-) ..............................328 W Wing T ur nbuc kle and T ranspor t Bar ............
8 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index.
02/03/09 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 9 T able of Contents P ar t Number Index.
16969 10 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 2: Decks RC5015 & RC6015 SERIES (540 RPM) Blade Carrier Ap.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg16969 BLADE BOL 1 1/8-12X3 7/16 W/KY 802-277C 1. Standard Blade Quantity 2 per Center Section CUTTER BLADE 1/2X4X29 CCW 820-168C 2. Optional Blade Quantity 2 per Center Section CUTTER BLADE 1/2X4X29 LL CCW 820-188C 2.
15338 12 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 2: Decks RC5015 & RC6015 SERIES (540 RPM) Dec k Center Sec.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15338 ASSY . CENTER SECT . 540 RPM 318-026L Includes items 26 par t no. 826-174C, 27, 33 & 34 ASSY . SUB CENTER SECT .540 RPM 318-073S RPBY 318-148K 318-016H 1. NUT HEX WHIZ 1/2-13 PL T 803-037C 2.
16924 14 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 2: Decks RC5015 & RC6015 SERIES (540 RPM) Dec k Center Sec.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg16924 WLDMT . SKID SHOE LH. 318-146H 1. NUT HEX WHIZ 1/2-13 PL T 803-037C 2. HFS 1/2-13X2 GR8 802-456C 3. OMNI Gear Box W ASHER LOCK SPRING 3/4 PL T 804-023C 4. OMNI Gear Box HHCS 3/4-10X1 1/2 GR5 802-184C 5.
Revision Comments P ar t Description P ar t No. Ref. WLDMT . CENTER SECTION RED 318-568H83 29. RC6015 WLDMT . CENTER SECTION W/DECK RINGS 318-931H 29. WLDMT . CENTER SECTION W/DECK RINGS GREEN 318-931H81 29. WLDMT . CENTER SECTION W/DECK RINGS RED 318-931H83 29.
This P age Intentionally Left Blank 02/03/09 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 17 T able of Contents P ar t Number Index Section 2: Decks Land Pride RC5015 & RC6015 SER.
15340 18 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 2: Decks RC5015 & RC6015 SERIES (540 RPM) Dec k Wing Secti.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15340 LH Wing Shown DEFLECT OR 318-087D 1. DEFLECT OR GREEN 318-087D81 1. DEFLECT OR RED 318-087D82 1. RH Wing DEFLECT OR 318-086D 1. DEFLECT OR GREEN 318-086D81 1. DEFLECT OR RED 318-086D83 1.
Revision Comments P ar t Description P ar t No. Ref. HHCS 3/4-10X2 GR5 802-064C 9. Re v . 2 not compat. w/Rev . 1. (S/N 325492+) SHIELD WELDMENT 318-400H 10. Rev . 1 (S/N 325491-) SHIELD WELDMENT 312-399H 10. WASHER FLA T 3/8 SAE PL T 804-012C 11. KNOB 3/8-16 FEMALE THD 2 3/8OD 817-259C 12.
This P age Intentionally Left Blank 02/03/09 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 21 T able of Contents P ar t Number Index Section 2: Decks Land Pride RC5015 & RC6015 SER.
15351 22 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 2: Decks RC5015 & RC6015 SERIES (540 RPM) Hitch Applies to.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15351 Includes items 1 through 9 ASSY . T ONGUE 318-054L WLDMT . TONGUE CLEVIS 318-005H 1. SAFETY CHAIN 10000 LB 890-182C 2. HHCS 1-8X2 1/2 GR5 802-096C 3. W ASHER FLA T 1 USS 804-028C 4.
15488 24 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 2: Decks RC5015 & RC6015 SERIES (540 RPM) Wing T urnbuc kl.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15488 WLDMT . HINGE ROD 318-017H 1. HHCS 3/8-16X1 1/2 GR5 802-022C 2. NUT HEX TOP LOCK 1-8 PL T 803-168C 3. S/N 222150+ HHCS 1-8X5 1/2 GR5 802-205C 4. S/N 222149- HHCS 1-8X5 GR5 802-235C 4.
15376 26 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 3: Axles RC5015 & RC6015 SERIES (540 RPM) Axle Center Dual.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15376 (S/N 419601-) SP ACER 1 1/2OD X .234W X 1 318-085D 1. Rev . 2 not compat. w/Rev . 1. (S/N 222150+) HHCS 1-8X5 1/2 GR5 802-205C 2. Rev . 1 (S/N 222149-) HHCS 1-8X5 GR5 802-235C 2.
23962 28 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 3: Axles RC5015 & RC6015 SERIES (540 RPM) Axle Center Dual.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg23962 HHCS 1-8X5 1/2 GR5 802-205C 1. HHCS 1-8X9 GR5 802-110C 2. NUT HEX T OP LOCK 1-8 PL T 803-168C 3. HUB GREASE CAP 200-001D 4. NUT HEX SLO TTED 3/4-16 803-053C 5. W ASHER HARDENED .
15384 30 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 3: Axles RC5015 & RC6015 SERIES (540 RPM) Axle Center Sing.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15384 21LAMINA TED TIRE SGL. P ACKA GE 318-043A 15WHEEL RIM SGL. P ACKA GE 318-044A AIRPLANE TIRE SGL. AXLE 318-045A (S/N 419601-) SP ACER 1 1/2OD X .234W X 1 318-085D 1. Rev .
22084 32 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 3: Axles RC5015 & RC6015 SERIES (540 RPM) Axle T andem Cen.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg22084 HUB GREASE CAP 200-001D 1. WLDMT . CENTER AXLE 318-571H 2. WLDMT . T ANDEM ARM 318-573H 3. Optional WLDMT . PVT . PIN W ALKING T ANDEM 318-855H 4. GREASE ZERK STRAIGHT 1/4-28 800-001C 5.
23964 34 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 3: Axles RC5015 & RC6015 SERIES (540 RPM) Axle T andem Cen.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg23964 HUB GREASE CAP 200-001D 1. Added Hardened Bushings WLDMT . CENTER AXLE 318-571H 2. WLDMT . T ANDEM ARM 318-573H 3. Optional WLDMT . PVT . PIN W ALKING T ANDEM 318-966H 4.
15352 36 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 3: Axles RC5015 & RC6015 SERIES (540 RPM) Axle Wing (S/N 4.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15352 (S/N 223259-) WLDMT . WING AXLE LH. 318-011H 1. (S/N 223259-) WLDMT . WING AXLE RH. 318-010H 2. NUT HEX TOP LOCK 1-8 PL T 803-168C 3. HHCS 1-8X6 GR5 802-357C 4. HUB GREASE CAP 200-001D 5.
23963 38 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 3: Axles RC5015 & RC6015 SERIES (540 RPM) Axle Wing (S/N 4.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg23963 NUT HEX T OP LOCK 1-8 PL T 803-168C 1. HHCS 1-8X6 GR5 802-357C 2. HUB GREASE CAP 200-001D 3. NUT HEX SLO TTED 3/4-16 803-053C 4. WASHER HARDENED .81ID 804-216C 5. BEARING CONE LM-67048 822-021C 6.
15410 40 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 4: Guards RC5015 & RC6015 SERIES (540 RPM) Guar ds Center .
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15410 CHAIN WELD 5/16 PROOF X 7-LINK 890-393C 1. NUT HEX WHIZ 1/2-13 PL T 803-037C 2. RHSNB 1/2-13X1 1/4 GR5 802-214C 3. CG. FRONT CTR. LH.OUTER 318-098D 4. ROUND ROD 1/4 X 22 318-113D 5.
19019 42 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 4: Guards RC5015 & RC6015 SERIES (540 RPM) Guar ds Center .
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg19019 CHAIN WELD 5/16 PROOF X 7-LINK 890-393C 1. NUT HEX WHIZ 1/2-13 PL T 803-037C 2. RHSNB 1/2-13X1 1/4 GR5 802-214C 3. RC5015 CEN CHAINGU ARD LH 318-331D 4. ROUND R OD 1/4 X 25 318-337D 5.
22135 44 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 4: Guards RC5015 & RC6015 SERIES (540 RPM) Guar ds Center .
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg22135 CHAIN WELD 5/16 PROOF X 7-LINK 890-393C 1. NUT HEX WHIZ 1/2-13 PL T 803-037C 2. RHSNB 1/2-13X1 1/4 GR5 802-214C 3. RC5015 CEN CHAINGU ARD LH 318-331D 4. ROUND R OD 1/4 X 25 318-337D 5.
15690 46 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 4: Guards RC5015 & RC6015 SERIES (540 RPM) Guar ds Center .
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15690 ASSY . DBL.CG.FRT .CTR. RH.OUTER 318-066K 1. ASSY . DBL.CG.FRT .CENTER 318-065K 2. ASSY . DBL.CG.FRT .CTR. LH.OUTER 318-097K 3. ASSY . CG. REAR CENTER OUTER 318-071K 4.
19020 48 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 4: Guards RC5015 & RC6015 SERIES (540 RPM) Guar ds Center .
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg19020 ASSY . DBL. CG. FRT . CTR. RH. 318-325K 1. ASSY . DBL. CG. FRT . CTR. 318-324K 2. ASSY . DBL. CG. FRT . CTR. LH. 318-326K 3. ASSY . CG. REAR CENTER OUTER 318-071K 4. ASSY .
22136 50 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 4: Guards RC5015 & RC6015 SERIES (540 RPM) Guar ds Center .
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg22136 ASSY . DBL. CG. FRT . CTR. RH. 318-325K 1. ASSY . DBL. CG. FRT . CTR. 318-324K 2. ASSY . DBL. CG. FRT . CTR. LH. 318-326K 3. NUT HEX WHIZ 1/2-13 PL T 803-037C 4. NUT HEX WHIZ 3/8-16 PL T 803-198C 5.
15436 52 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 4: Guards RC5015 & RC6015 SERIES (540 RPM) Guar ds Wing De.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15436 ROUND R OD 1/4 X 28 1/2 318-106D 1. CHAIN WELD 5/16 PROOF X 7-LINK 890-393C 2. CG. WING FRONT OUTER LH. 318-100D 3. NUT HEX WHIZ 1/2-13 PL T 803-037C 4. RHSNB 1/2-13X1 1/4 GR5 802-214C 5.
19018 54 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 4: Guards RC5015 & RC6015 SERIES (540 RPM) Guar ds Wing De.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg19018 ROUND R OD 1/4 X 73 318-336D 1. CHAIN WELD 5/16 PROOF X 7-LINK 890-393C 2. RC5015 WING CHAINGU ARD LH 318-327D 3. NUT HEX WHIZ 1/2-13 PL T 803-037C 4. RHSNB 1/2-13X1 1/4 GR5 802-214C 5.
23952 56 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Drivelines RC5015 & RC6015 SERIES (540 RPM) Driveline C.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg23952 PT O E60 X 21.7 1280NM CLUTCH 826-478C COMER Y OKE COMPLETE 141.026.357.1 1. COMER CROSS ASSEMBL Y 180.016.130 2. COMER Y OKE, OUTER 170.016.630.1 3. COMER SHAFT , SPLINED 155.
15570 58 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Drivelines RC5015 & RC6015 SERIES (540 RPM) Driveline C.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15570 PT O INT . CA T .4 540W/CLUTCH 826-183C * Includes items 7, 8 & 9 EC BOL T ASSY KIT 6761280 Y OKE ASSEMBL Y (TRACT OR END) 1106525 1. CROSS ASSEMBL Y 1006020 2. OUTER TUBE Y OKE 1706027 3.
16965 60 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Drivelines RC5015 & RC6015 SERIES (540 RPM) Driveline C.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg16965 PT O INT . W2500/WSC CA T5 540 826-260C WS Y OKE 1 3/4-20 SPL.I.C. 2500 325027 1. WS CR OSS & BEARING KIT 2500 312209 2. WS INBOARD Y OKE 2500 097140 3. WS SPRING PIN 10 X 90 304046 4.
18548 62 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Drivelines RC5015 & RC6015 SERIES (540 RPM) Driveline Con v .
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg18548 PT O 2500 X 39.76 NO CLUTCH 826-112C WS Y OKE 1 3/4-20 SPL.I.C. 2500 325027 1. WS Y OKE 1 3/8-6 SPL Q.D . 2500 097136 2. WS CR OSS & BEARING KIT 2500 312209 3. WS INBOARD Y OKE 2500 097140 4.
16736 64 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Drivelines RC5015 & RC6015 SERIES (540 RPM) Driveline Con v .
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg16736 RPBY 826-112C 826-188C EC TUBE BEARING (INNER TUBE) 1786711 1. EC STIFFENING RING 1215733 2. EC ST ANDARD CONE 1885703 3. EC ST OP RING 1215735 4. EC SAFETY SLEEVE 1885709 5.
15569 66 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Drivelines RC5015 & RC6015 SERIES (540 RPM) Driveline Con v .
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15569 RPBY 826-112C 826-188C EC CROSS ASSEMBL Y 1006020 1. EC TUBE BEARING (OLD STYLE) 1786009 2. EC INNER TUBE Y OKE 1706029 3. EC 10X80-DIN-1481 O/TUBE R/PIN 6331080 4. EC INNER TUBE (1526084) 840MM 1526085 5.
26857 68 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Drivelines RC5015 & RC6015 SERIES (540 RPM) Driveline C.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg26857 PT O CV 2580 X 41.73 826-117C WS Y OKE 1 3/4-20 SPL.I.C. 2500 325027 1. WS Y OKE 1 3/8-6 SPL 363617 2. WS GREASE ZERK 020672 3. WS DOUBLE Y OKE 2500 365725 4. WS CROSS & BEARING KIT 2500 384316 5.
16732 70 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Drivelines RC5015 & RC6015 SERIES (540 RPM) Driveline C.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg16732 RPBY 826-117C 826-181C EC TUBE BEARING (INNER TUBE) 1786711 1. EC STIFFENING RING 1215733 2. EC ST ANDARD CONE 1885703 3. EC ST OP RING 1215735 4. EC SAFETY SLEEVE 1885709 5.
15512 72 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Drivelines RC5015 & RC6015 SERIES (540 RPM) Driveline C.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15512 RPBY 826-117C 826-181C Rev . 2 Service only EC CV JOINT 1 3/8-6 SPLINE 7106622 1. Rev . 1 RPBY 7106622 7600602 1. EC 10X80-DIN-1481 O/TUBE R/PIN 6331080 2. EC SOFT CONE 1886528 3.
19897 74 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Drivelines RC5015 & RC6015 SERIES (540 RPM) Driveline C.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg19897 Driveline CV W alterscheid (540 RPM) 826-336C WS Y OKE 1 3/8-6 SPL 363617 1. WS DOUBLE Y OKE 2500 365725 2. WS GREASE ZERK 020672 3. WS INBOARD Y OKE S4 331573 4. WS CROSS & BEARING KIT 2500 384316 5.
23947 76 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Drivelines RC5015 & RC6015 SERIES (540 RPM) Driveline C.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg23947 PT O CV V80 X 54.8 NO CLUTCH 826-476C * COMER COLLER Y OKE ASSEMBL Y 141.028.358.1 1. COMER CV -JOINT CROSS ASSEMBL Y 180.018.158 2. COMER WIDE ANGLE DOUBLE Y OKE 141.028.
23994 78 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Drivelines RC5015 & RC6015 SERIES (540 RPM) Driveline C.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg23994 Service Only EC 1 3/8" Z6PULL COLLAR 7106622 EC PULL TYPE Y OKE 1006875 1. EC GO6 CROSS ASSEMBL Y 1006830 2. EC HOMOKINETIC JOINT 1006831 3. EC OUTER TUBE HOMOKINETIC Y OKE 1006827 4.
15513 80 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Drivelines RC5015 & RC6015 SERIES (540 RPM) Driveline C.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15513 EC CV JOINT 1 3/8-6 SPLINE 7600602 EC Y OKE ASSY . 1 3/8-6 SPLINE 1000618 1. EC EC SPIDER ASSEMBL Y 1000630 2. EC SEMI MALE SUPPORT 1700600 3. EC BEARING RING 1700603 4.
23957 82 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Drivelines RC5015 & RC6015 SERIES (540 RPM) Driveline Slip Clutch (146.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg23957 COMER CLUTCH, COMPLETE ASSY 146.264.024.1 * COMER SPRING 180.014.022 1. COMER Y OKE, FLANGED 151.016.037.1 2. COMER BUSH 180.019.019 3. COMER LINING RING 180.019.018 4.
23958 84 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Drivelines RC5015 & RC6015 SERIES (540 RPM) Driveline Slip Clutch (146.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg23958 COMER CLUTCH, DISC COMPLETE 146.284.020.1 * COMER SPRING 180.014.022 1. COMER Y OKE, FLANGED 151.018.016.1 2. COMER BUSH 180.019.019 3. COMER LINING RING 180.019.018 4.
17005 86 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Drivelines RC5015 & RC6015 SERIES (540 RPM) Driveline S.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg17005 WS FRICTION CLUTCH 383805 WS CLUTCH HOUSING 324822 1. WS FRICTION DISK 168556 2. WS HUB 1 3/4"-20 SPL 351793 3. WS DRIVE PLA TE 042454 4. WS DRIVE PLA TE 042459 5.
16947 88 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Drivelines RC5015 & RC6015 SERIES (540 RPM) Driveline S.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg16947 WS FRICTION CLUTCH 391708 WS CLUTCH HOUSING 324822 1. WS FRICTION DISK 168556 2. WS HUB 1-3/4"-20 SPL 391358 3. WS DRIVE PLA TE 042454 4. WS DRIVE PLA TE 042459 5.
15521 90 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Drivelines RC5015 & RC6015 SERIES (540 RPM) Driveline S.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15521 EC CLUTCH FD4/6 1 3/4 20 SPL 1446016 * RPBY 330-297A 1215012 1. EC CLUTCH Y OKE W/FLANGE 1706033 2. EC CLUTCH BUSHING 1705009 3. EC CLUTCH LINING RING 1808010 4. EC CLUTCH MIDDLE DISK 1708034 5.
23996 92 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Drivelines RC5015 & RC6015 SERIES (540 RPM) Driveline W.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg23996 PT O CA T .4 W/CLUTCH 1 3/4-20 826-185C * EC TUBE BEARING (INNER TUBE) 1786711 1. EC STIFFENING RING 1215733 2. EC SHORT CONE 1885702 3. EC ST OP RING 1215735 4. EC SAFETY SLEEVE 1885709 5.
15567 94 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Drivelines RC5015 & RC6015 SERIES (540 RPM) Driveline W.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15567 PT O CA T .4 W/CLUTCH 1 3/4-20 826-185C EC CROSS ASSEMBL Y 1006020 1. EC TUBE BEARING 1786009 2. EC INNER TUBE Y OKE 1706029 3. EC 10X80-DIN-1481 O/TUBE R/PIN 6331080 4.
17004 96 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Drivelines RC5015 & RC6015 SERIES (540 RPM) Driveline W.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg17004 PT O W2500/WSC CA T5 540/1000 826-262C WS LOCK NUT M16 304011 1. WS HEX BOL T M16 X 90 GR 8.8 702352 2. WS Y OKE 1 3/4-20 SPL.I.C. 2500 325027 3. WS CROSS & BEARING KIT 2500 312209 4.
23953 98 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Drivelines RC5015 & RC6015 SERIES (540 RPM) Driveline W.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg23953 PT O V80 X 59.3 1280NM CLUTCH 826-481C COMER Y OKE COMPLETE 141.028.195.1 1. COMER CROSS ASSEMBL Y 180.018.004 2. COMER Y OKE OUTER 151.018.241.1 3. COMER OUTER TUBE R OLL PIN 190.
15500 100 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 6: Gearbox es RC5015 & RC6015 SERIES (540 RPM) Gearbo x 5.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15500 RC5015 GBO X RC130S 1.75-20 1:1.46 CW 826-174C RC6015 GBO X RC130L 1.75-20 1:1.46 CW 826-231C RC5015 (826-174C) OMNI HOUSING RC130S CW 010156 1. RC6015 (826-231C) OMNI HOUSING RC-130LS 010167 1.
15506 102 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 6: Gearbox es RC5015 & RC6015 SERIES (540 RPM) Gearbo x 5.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15506 RC5015 GBO X RC130S 1.75-20 1:1.46 CCW 826-175C RC6015 GBO X RC130L 1.75-20 1:1.46 CCW 826-232C RC5015 (826-175C) OMNI HOUSING RC130C CCW 010157 1. RC6015 (826-232C) OMNI HOUS.
21167 104 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 6: Gearbox es RC5015 & RC6015 SERIES (540 RPM) Gearbo x 5.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg21167 RC5015 GBO X RC50 1.75-20 1:1.46 CCW 826-315C RC6015 GBO X RC60 1.75-20 1:1.46 CCW 826-320C RC5015 (826-315C) CO HOUSING U0.125.0531.00 1. RC6015 (826-320C) CO HOUSING UO .
21266 106 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 6: Gearbox es RC5015 & RC6015 SERIES (540 RPM) Gearbo x 5.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg21266 RC5015 GBO X RC50 1.75-20 1:1.46 CCW 826-315C RC6015 GBO X RC60 1.75-20 1:1.46 CCW 826-320C RC5015 (826-315C) HOUSING 16571-01 1. RC6015 (826-320C) HOUSING 16572-01 1. BEVEL GEAR Z22 M8 17271-03 2.
21171 108 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 6: Gearbox es RC5015 & RC6015 SERIES (540 RPM) Gearbo x 5.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg21171 RC5015 GBO X RC50 1.75-20 1:1.46 CW 826-316C RC6015 GBO X RC60 1.75-20 1:1.46 CW 826-321C RC5015 (826-316C) CO HOUSING U0.125.0531.00 1. RC6015 (826-321C) CO HOUSING U0.
21267 110 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 6: Gearbox es RC5015 & RC6015 SERIES (540 RPM) Gearbo x 5.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg21267 RC5015 GBO X RC50 1.75-20 1:1.46 CW 826-316C RC6015 GBO X RC60 1.75-20 1:1.46 CW 826-321C RC5015 (826-316C) HOUSING 16571-01 1. RC6015 (826-321C) HOUSING 16571-01 1. BEVEL GEAR Z22 M8 17271-03 2.
19604 112 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 6: Gearbox es RC5015 & RC6015 SERIES (540 RPM) Gearbo x D.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg19604 DIV OMNI/CO 540RPM 1 3/4-20 826-179C CO BOL T M10 X 35 8.8 8.1.1.00109 1. TOP CO VER PLA TE 0.305.1300.00 2. CO BEARING 30209 RT A25 8.0.9.00143 3. CO SNAP RING 8.5.2.01772 4.
15503 114 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 6: Gearbox es RC5015 & RC6015 SERIES (540 RPM) Gearbo x D.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15503 DIV OMNI/CO 540RPM 1 3/4-20 826-179C * OMNI HOUSING RCD101HD 010063 1. OMNI INPUT CAP 020162 2. OMIN CANTILEVERED OUTPUT CAP 020061 3. OMNI OUTPUT CAP 020110 4. OMNI PINION, 20T 030413 5.
15427 116 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 7: Hydraulics RC5015 & RC6015 SERIES (540 RPM) Hydraulic .
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15427 RC5015 & RCM5015 CYL 3X8X1.25 ROD (TIE) NO PINS 810-195C 1. RC6015 & RCM6015 CYL 3.5X8X1.25 ROD (TIE R OD) 810-162C 1. CP 3/4FORB MALE QD 811-394C 2. HH3/8R1 168 3/4MORB 3/4FJIC 811-619C 3.
25899 118 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 7: Hydraulics RC5015 & RC6015 SERIES (540 RPM) Hydraulic .
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg25899 CYL 2.5X12X1.25 ROD (TIE R OD) 810-150C * NUT HEX 3/8-16 PL T 803-014C 1. MON PISTON NUT 130556 2. LION PIN 134953 3. MON CLEVIS PIN CO TTER 135995 4. SCREW SET SH 3/8-16X3/8 TYPE C 801-023C 5.
25900 120 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 7: Hydraulics RC5015 & RC6015 SERIES (540 RPM) Hydraulic .
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg25900 CYL 3.5X8X1.25 ROD (TIE R OD) 810-162C * NUT HEX 5/8-18 PL T 803-022C 1. MON PISTON NUT 130560 2. LION PIN 134953 3. MON CLEVIS PIN CO TTER 135995 4. SCREW SET SH 3/8-16X3/8 TYPE C 801-023C 5.
25902 122 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 7: Hydraulics RC5015 & RC6015 SERIES (540 RPM) Hydraulic .
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg12345 CYL 3X12X1.25 ROD (TIE R OD) 810-312C * NUT HEX 1/2-13 PL T 803-020C 1. MON PISTON NUT 130560 2. SCREW SET SH 3/8-16X3/8 TYPE C 801-023C 3. PLUG 9/16-18UNF MORB SOCKET HD 186561 4.
12499 124 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 7: Hydraulics RC5015 & RC6015 SERIES (540 RPM) Hydraulic .
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg12499 CYL 3X8X1.25 ROD (TIE) NO PINS 810-624C * MW BASE 3 X 3/4 SAE ORB PORT 6M4166 1. MW TIE ROD NUT 2A0014 2. Only found in sealkit 17 O-RING 3. MW TIE ROD 3 X 8 CYLINDER 7M4316 4.
25896 126 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 7: Hydraulics RC5015 & RC6015 SERIES (540 RPM) Hydraulic .
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg25896 CYL 3X8X1.25 ROD (TIE) NO PINS 810-624C * NUT HEX 1/2-13 PL T 803-020C 1. MON PISTON NUT 130560 2. SCREW SET SH 3/8-16X3/8 TYPE C 801-023C 3. LION PLUG 3/4-16UNF SOCKET HD 186562 4.
12499 128 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 7: Hydraulics RC5015 & RC6015 SERIES (540 RPM) Hydraulic .
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg12499 CYL 3X8X1.25 ROD (TIE) NO PINS 810-195C MW BASE 3 X 3/4 SAE ORB POR T 6M4166 1. MW TIE ROD NUT 2A0014 2. Only found in sealkit 17 O-RING 3. MW TIE ROD 3 X 8 CYLINDER 7M4316 4.
11421 130 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 7: Hydraulics RC5015 & RC6015 SERIES (540 RPM) Hydraulic .
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg11421 CYL 3.5X8X1.25 ROD (TIE R OD) 810-162C BASE CROSS 1D1509-4 1. TIE ROD NUT CR OSS 2A0236-9 2. Only av ailable in Seal Kit (#19) O-RING 3. TIE ROD CR OSS 2A0581-1325 4. TIE ROD CR OSS 1D0009-1050 5.
11421 132 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 7: Hydraulics RC5015 & RC6015 SERIES (540 RPM) Hydraulic .
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg19893 CYL 3.5X8X1.25 ROD (TIE R OD) 810-162C MW BASE (STD 1 PIN) 6M5142 1. MW TIE ROD NUT 2A0016 2. Only av ailable in Seal Kit (#19) O-RING 3. MW R OD 7M5316 4. MW TUBE 3 1/2 X 8 CYLINDER 5M5116 5.
15572 134 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 7: Hydraulics RC5015 & RC6015 SERIES (540 RPM) Hydraulic .
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15572 CYL 2.5X12X1.25 ROD (TIE R OD) 810-150C BASE CROSS 1D1505-3 1. CROSS NUT , CLEVIS & TIE ROD 2A0235-6 2. Only found in seal kit 19 MW O-RING 3. TIE ROD CR OSS 2A0578-1675 4.
15572 136 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 7: Hydraulics RC5015 & RC6015 SERIES (540 RPM) Hydraulic .
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15572 CYL 2.5X12X1.25 ROD (TIE R OD) 810-150C MW BASE 6M3118 1. MW NUT CLEVIS & TIE ROD 2A0012 2. Only found in seal kit 19 MW O-RING 3. ROD MW TIE 7M3320 4. MW TUBE 5M3120 5.
15572 138 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 7: Hydraulics RC5015 & RC6015 SERIES (540 RPM) Hydraulic .
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15426 CYL 3X12X1.25 ROD (TIE R OD 810-312C BASE CROSS 1D1505-3 1. CROSS NUT ,CLEVIS AND TIE ROD 2A0235-6 2. Only found in seal kit 20. O-RING 3. TIE ROD CR OSS 2A0578-1675 4.
15242 140 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 7: Hydraulics RC5015 & RC6015 SERIES (540 RPM) Hydraulic .
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg11196 CYL 3X12X1.25 ROD (TIE R OD 810-312C MW CLEVIS STD . DUTY 1M6010 1. MW ROD 1-1/4 DIA. X 10 STR OKE 2M4418 2. MW HEAD CAP 3X1-1/4 RD 9/16SAE 3M4410 3. MW PISTON 3 DIA. 4M4104 4.
25519 142 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 7: Hydraulics RC5015 & RC6015 SERIES (540 RPM) Hydraulic .
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg25519 HYDRA ULIC WING CONTROL ASSY . 318-316A * AD 9/16MJIC 811-315C 1. CP 3/4FORB MALE QD POPPET TYPE 811-394C 2.
19893 144 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 7: Hydraulics RC5015 & RC6015 SERIES (540 RPM) Hydraulic .
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg19893 2-W A Y SELECTOR VL V KIT 312-316A HH1/4R1 265 1/2MNPT 9/16FJIC 811-358C 1. AD 1/2FNPTS 3/4MORB 811-021C 2. SELECT OR V AL VE 3-W A Y 2 POS 810-152C 3. AD 3/4MORB 3/4MJIC 811-088C 4.
11196 146 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 7: Hydraulics RC5015 & RC6015 SERIES (540 RPM) Hydraulic .
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg11196 3-SPOOL V AL VE KIT 312-315A 3-SPOOL DIRECTION CONTR OL V AL V 810-167C 1. HH1/4R1 265 1/2MNPT 9/16FJIC 811-358C 2. AD 3/4MJIC 1/2FNPT 811-290C 3. EL 3/4MJIC X 3/4MNPT 811-359C 4.
15426 148 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 7: Hydraulics RC5015 & RC6015 SERIES (540 RPM) Hydraulic .
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15426 RC5015 & RCM5015 CYL 2.5X12X1.25 ROD (TIE R OD) 810-150C 1. RC6015 & RCM6015 CYL 3X12X1.25 ROD (TIE ROD) 810-312C 1. OREL 1/16 9/16MJIC 9/16MORB 811-337C 2. VENT PLUG - 9/16-18 PLA TED 800-117C 3.
25515 150 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 7: Hydraulics RC5015 & RC6015 SERIES (540 RPM) Maunal Win.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg25515 MECHANICAL WINCH 318-271A * WLDMT . WINCH 318-256H 1. HHCS 3/8-16X1 3/4 GR5 802-023C 2. HHCS 5/8-11X1 3/4 GR5 802-053C 3. NUT LOCK 3/8-16 PL T 803-013C 4. NUT HEX T OP LOCK 5/8-11 PL T 803-271C 5.
17564 152 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 8: Labels RC5015 & RC6015 SERIES (540 RPM) Label Placemen.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg17564 RC5015 DECAL P ACKA GE 318-101A RCM5015 DECAL P ACKA GE 318-102A RC6015 DECAL P ACKA GE 318-183A RCM6015 DECAL P ACKA GE 318-184A DECAL W ARNING PINCH PT/CRUSH 818-045C 1.
Revision Comments P ar t Description P ar t No. Ref. DECAL D ANGER PTO DRIVELINE 818-552C 30. DECAL IMPORT ANT - SLIP CLUTCH 818-680C 31. FOLDING CUTTER SPEED WARNING 838-588C 32.
This P age Intentionally Left Blank 02/03/09 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 155 T able of Contents P ar t Number Index Section 8: Labels Land Pride RC5015 & RC6015 S.
20659 156 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 9: Options RC5015 & RC6015 SERIES (540 RPM) Baffle Shread.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg20659 ASSY .BAFFLE/SHRD OMNI RC5015 318-311A ASSY .BAFFLE/SHRD COMER RC5015-6015 318-395A ASSY .BAFFLE/SHRD OMNI RC6015 318-436A (Shown)318-311A OMNI 5015 WELDMENT BLADE CARRIER OMNI 318-302H 1.
23949 158 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 9: Options RC5015 & RC6015 SERIES (540 RPM) Shredder Kit .
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg23949 ASSY 50/6015 SHREDDER COMER 318-949A * BLADE BUSHING 318-309D 1. WELDMENT BLADE CARRIER COMER 318-396H 2. ASSY CCW BLADES 59.5 COMER 318-946S 3. ASSY CCW BLADES 71.5 COMER 318-947S 4.
23950 160 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 9: Options RC5015 & RC6015 SERIES (540 RPM) Shredder Kit .
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg23950 ASSY 5015 SHREDDER OMNI 318-953A * WELDMENT BLADE CARRIER 318-302H 1. BLADE BUSHING 318-309D 2. ASSY CCW BLADES 59.5 OMNI 50 318-950S 3. ASSY CCW BLADES 71.5 OMNI 50 318-951S 4.
23951 162 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 9: Options RC5015 & RC6015 SERIES (540 RPM) Shredder Kit .
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg23951 ASSY 6015 SHREDDER OMNI 318-957A * BLADE BUSHING 318-309D 1. WELDMENT BLADE CARRIER OMNI 318-435H 2. ASSY CCW BLADES 59.5 OMNI 60 318-954S 3. ASSY CCW BLADES 71.5 OMNI 60 318-955S 4.
16969 164 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 2: Decks RCM5015 & RCM6015 SERIES (1000 RPM) Blade Carrie.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg16969 BLADE BOL 1 1/8-12X3 7/16 W/KY 802-277C 1. Standard Blade Quantity 2 per Center Section CUTTER BLADE 1/2X4X29 CCW 820-168C 2. Optional Blade Quantity 2 per Center Section CUTTER BLADE 1/2X4X29 LL CCW 820-188C 2.
15338 166 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 2: Decks RCM5015 & RCM6015 SERIES (1000 RPM) Dec k Center.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15338 ASSY . CENTER SECT . 1000 RPM 318-029L Includes items 26 par t no . 826-177C, 27, 33 & 34 ASSY . SUB CENTER SEC.1000 RPM 318-082S RPBY 318-148K 318-016H 1. NUT HEX WHIZ 1/2-13 PL T 803-037C 2.
16924 168 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 2: Decks RCM5015 & RCM6015 SERIES (1000 RPM) Dec k Center.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg16924 WLDMT . SKID SHOE LH. 318-146H 1. NUT HEX WHIZ 1/2-13 PL T 803-037C 2. HFS 1/2-13X2 GR8 802-456C 3. OMNI Gear Box W ASHER LOCK SPRING 3/4 PL T 804-023C 4. OMNI Gear Box HHCS 3/4-10X1 1/2 GR5 802-184C 5.
Revision Comments P ar t Description P ar t No. Ref. WLDMT . CENTER SECTION RED 318-568H83 29. RCM6015 WLDMT . CENTER SECTION W/DECK RINGS 318-931H 29. WLDMT . CENTER SECTION W/DECK RINGS GREEN 318-931H81 29. WLDMT . CENTER SECTION W/DECK RINGS RED 318-931H83 29.
This P age Intentionally Left Blank 02/03/09 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 171 T able of Contents P ar t Number Index Section 2: Decks Land Pride RCM5015 & RCM6015 .
15340 172 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 2: Decks RCM5015 & RCM6015 SERIES (1000 RPM) Dec k Wing S.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15340 LH Wing Shown DEFLECT OR 318-087D 1. DEFLECT OR GREEN 318-087D81 1. DEFLECT OR RED 318-087D83 1. RH Wing DEFLECT OR 318-086D 1. DEFLECT OR GREEN 318-086D81 1. DEFLECT OR RED 318-086D83 1.
Revision Comments P ar t Description P ar t No. Ref. GBO X RCM60 1:1.21 CW RED 826-324C83 8. RCM6015 RH (S/N 325491-) GBO X RC130L 1.75-20 1:1.21 CCW 826-235C 8. HHCS 3/4-10X2 GR5 802-064C 9. Rev . 2 not compat. w/Rev . 1. (S/N 325492+) SHIELD WELDMENT 318-400H 10.
This P age Intentionally Left Blank 02/03/09 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 175 T able of Contents P ar t Number Index Section 2: Decks Land Pride RCM5015 & RCM6015 .
15351 176 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 2: Decks RCM5015 & RCM6015 SERIES (1000 RPM) Hitch Applie.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15351 Includes items 1 through 9 ASSY . T ONGUE 318-054L WLDMT . TONGUE CLEVIS 318-005H 1. SAFETY CHAIN 10000 LB 890-182C 2. HHCS 1-8X2 1/2 GR5 802-096C 3. W ASHER FLA T 1 USS 804-028C 4.
15488 178 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 2: Decks RCM5015 & RCM6015 SERIES (1000 RPM) Wing T urnbu.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15488 WLDMT . HINGE ROD 318-017H 1. HHCS 3/8-16X1 1/2 GR5 802-022C 2. NUT HEX TOP LOCK 1-8 PL T 803-168C 3. S/N 222150+ HHCS 1-8X5 1/2 GR5 802-205C 4. S/N 222149- HHCS 1-8X5 GR5 802-235C 4.
15376 180 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 3: Axles RCM5015 & RCM6015 SERIES (1000 RPM) Axle Center .
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15376 (S/N 419601-) SP ACER 1 1/2OD X .234W X 1 318-085D 1. Rev . 2 not compat. w/Rev . 1. (S/N 222150+) HHCS 1-8X5 1/2 GR5 802-205C 2. Rev . 1 (S/N 222149-) HHCS 1-8X5 GR5 802-235C 2.
23962 182 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 3: Axles RCM5015 & RCM6015 SERIES (1000 RPM) Axle Center .
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg23962 HHCS 1-8X5 1/2 GR5 802-205C 1. HHCS 1-8X9 GR5 802-110C 2. NUT HEX T OP LOCK 1-8 PL T 803-168C 3. HUB GREASE CAP 200-001D 4. NUT HEX SLOTTED 3/4-16 803-053C 5. W ASHER HARDENED .
15384 184 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 3: Axles RCM5015 & RCM6015 SERIES (1000 RPM) Axle Center .
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15384 21LAMINA TED TIRE SGL. P ACKA GE 318-043A 15WHEEL RIM SGL. P ACKA GE 318-044A AIRPLANE TIRE SGL. AXLE 318-045A (S/N 419601-) SP ACER 1 1/2OD X .234W X 1 318-085D 1. Rev .
22084 186 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 3: Axles RCM5015 & RCM6015 SERIES (1000 RPM) Axle T andem.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg22084 HUB GREASE CAP 200-001D 1. WLDMT . CENTER AXLE 318-571H 2. WLDMT . T ANDEM ARM 318-573H 3. Optional WLDMT . PVT . PIN W ALKING T ANDEM 318-855H 4. GREASE ZERK STRAIGHT 1/4-28 800-001C 5.
23964 188 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 3: Axles RCM5015 & RCM6015 SERIES (1000 RPM) Axle T andem.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg23964 HUB GREASE CAP 200-001D 1. Added Hardened Bushings WLDMT . CENTER AXLE 318-571H 2. WLDMT . T ANDEM ARM 318-573H 3. Optional WLDMT . PVT . PIN W ALKING T ANDEM 318-966H 4.
15352 190 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 3: Axles RCM5015 & RCM6015 SERIES (1000 RPM) Axle Wing (S.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15352 (S/N 223259-) WLDMT . WING AXLE LH. 318-011H 1. (S/N 223259-) WLDMT . WING AXLE RH. 318-010H 2. NUT HEX TOP LOCK 1-8 PL T 803-168C 3. HHCS 1-8X6 GR5 802-357C 4. HUB GREASE CAP 200-001D 5.
23963 192 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 3: Axles RCM5015 & RCM6015 SERIES (1000 RPM) Axle Wing (S.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg23963 NUT HEX T OP LOCK 1-8 PL T 803-168C 1. HHCS 1-8X6 GR5 802-357C 2. HUB GREASE CAP 200-001D 3. NUT HEX SLO TTED 3/4-16 803-053C 4. WASHER HARDENED .81ID 804-216C 5. BEARING CONE LM-67048 822-021C 6.
15410 194 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 4: Guards RCM5015 & RCM6015 SERIES (1000 RPM) Guar ds Cen.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15410 CHAIN WELD 5/16 PROOF X 7-LINK 890-393C 1. NUT HEX WHIZ 1/2-13 PL T 803-037C 2. RHSNB 1/2-13X1 1/4 GR5 802-214C 3. CG. FRONT CTR. LH.OUTER 318-098D 4. ROUND ROD 1/4 X 22 318-113D 5.
19019 196 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 4: Guards RCM5015 & RCM6015 SERIES (1000 RPM) Guar ds Cen.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg19019 CHAIN WELD 5/16 PROOF X 7-LINK 890-393C 1. NUT HEX WHIZ 1/2-13 PL T 803-037C 2. RHSNB 1/2-13X1 1/4 GR5 802-214C 3. RC5015 CEN CHAINGU ARD LH 318-331D 4. ROUND R OD 1/4 X 25 318-337D 5.
22135 198 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 4: Guards RCM5015 & RCM6015 SERIES (1000 RPM) Guar ds Cen.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg22135 CHAIN WELD 5/16 PROOF X 7-LINK 890-393C 1. NUT HEX WHIZ 1/2-13 PL T 803-037C 2. RHSNB 1/2-13X1 1/4 GR5 802-214C 3. RC5015 CEN CHAINGU ARD LH 318-331D 4. ROUND R OD 1/4 X 25 318-337D 5.
15690 200 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 4: Guards RCM5015 & RCM6015 SERIES (1000 RPM) Guar ds Cen.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15690 ASSY . DBL.CG.FRT .CTR. RH.OUTER 318-066K 1. ASSY . DBL.CG.FRT .CENTER 318-065K 2. ASSY . DBL.CG.FRT .CTR. LH.OUTER 318-097K 3. ASSY . CG. REAR CENTER OUTER 318-071K 4.
19020 202 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 4: Guards RCM5015 & RCM6015 SERIES (1000 RPM) Guar ds Cen.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg19020 ASSY . DBL. CG. FRT . CTR. RH. 318-325K 1. ASSY . DBL. CG. FRT . CTR. 318-324K 2. ASSY . DBL. CG. FRT . CTR. LH. 318-326K 3. ASSY . CG. REAR CENTER OUTER 318-071K 4. ASSY .
22136 204 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 4: Guards RCM5015 & RCM6015 SERIES (1000 RPM) Guar ds Cen.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg22136 ASSY . DBL. CG. FRT . CTR. RH. 318-325K 1. ASSY . DBL. CG. FRT . CTR. 318-324K 2. ASSY . DBL. CG. FRT . CTR. LH. 318-326K 3. NUT HEX WHIZ 1/2-13 PL T 803-037C 4. NUT HEX WHIZ 3/8-16 PL T 803-198C 5.
15436 206 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 4: Guards RCM5015 & RCM6015 SERIES (1000 RPM) Guar ds Win.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15436 ROUND R OD 1/4 X 28 1/2 318-106D 1. CHAIN WELD 5/16 PROOF X 7-LINK 890-393C 2. CG. WING FRONT OUTER LH. 318-100D 3. NUT HEX WHIZ 1/2-13 PL T 803-037C 4. RHSNB 1/2-13X1 1/4 GR5 802-214C 5.
19018 208 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 4: Guards RCM5015 & RCM6015 SERIES (1000 RPM) Guar ds Win.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg19018 ROUND R OD 1/4 X 73 318-336D 1. CHAIN WELD 5/16 PROOF X 7-LINK 890-393C 2. RC5015 WING CHAINGU ARD LH 318-327D 3. NUT HEX WHIZ 1/2-13 PL T 803-037C 4. RHSNB 1/2-13X1 1/4 GR5 802-214C 5.
23952 210 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Drivelines RCM5015 & RCM6015 SERIES (1000 RPM) Driveli.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg23952 PT O E60 X 21.7 1280NM CLUTCH 826-478C COMER Y OKE COMPLETE 141.026.357.1 1. COMER CROSS ASSEMBL Y 180.016.130 2. COMER Y OKE, OUTER 170.016.630.1 3. COMER SHAFT , SPLINED 155.
15497 212 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Drivelines RCM5015 & RCM6015 SERIES (1000 RPM) Driveli.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15497 PT O INT . CA T .4 1000W/CLUTCH 826-184C * Includes items 7, 8 & 9 EC BOL T ASSY KIT 6761280 EC Y OKE ASSEMBL Y (TRACT . END) 1106525 1. EC CR OSS ASSEMBL Y 1006020 2.
26867 214 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Drivelines RCM5015 & RCM6015 SERIES (1000 RPM) Driveli.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg26867 RPBY 826-478C 826-261C * WS Y OKE 1 3/4-20 SPL.I.C. 2500 325027 1. WS CROSS & BEARING KIT 2500 312209 2. WS INBO ARD Y OKE 2500 97140 3. WS SPRING PIN 10 X 90 304046 4.
16736 216 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Drivelines RCM5015 & RCM6015 SERIES (1000 RPM) Driveline Con v .
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg16736 RPBY 826-247C 826-189C EC TUBE BEARING (INNER TUBE) 1786711 1. EC STIFFENING RING 1215733 2. EC ST ANDARD CONE 1885703 3. EC STOP RING 1215735 4. EC SAFETY SLEEVE 1885709 5.
26862 218 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Drivelines RCM5015 & RCM6015 SERIES (1000 RPM) Driveline Con v .
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg26862 RPBY 826-247C 826-189C EC CROSS ASSEMBL Y 1006020 1. EC TUBE BEARING (OLD STYLE) 1786009 2. EC INNER TUBE Y OKE 1706029 3. EC 10X80-DIN-1481 O/TUBE R/PIN 6331080 4. EC INNER TUBE (1526084) 840MM 1526085 5.
18549 220 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Drivelines RCM5015 & RCM6015 SERIES (1000 RPM) Driveline Con v .
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg18549 PT O 2500 CA T .5 1000 1 3/8-21 826-247C WS Y OKE 1 3/4-20 SPL.I.C . 2500 325027 1. WS Y OKE 1 3/8-21 SPL. AS 362430 2. WS CROSS & BEARING KIT 2500 312209 3. WS INBOARD Y OKE 2500 097140 4.
12382 222 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Drivelines RCM5015 & RCM6015 SERIES (1000 RPM) Driveli.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg12382 RPBY 826-244C 826-118C WS Y OKE 1 3/4-20 SPL.I.C. 2500 331053 1. WS Y OKE 1 3/8-21 SPL 380883 2. WS GREASE ZERK 020672 3. WS DOUBLE Y OKE 365722 4. WS CROSS & BEARING KIT 342221 5.
26866 224 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Drivelines RCM5015 & RCM6015 SERIES (1000 RPM) Driveli.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg26866 RPBY 826-244C 826-182C EC TUBE BEARING (INNER TUBE) 1786711 1. EC STIFFENING RING 1215733 2. EC ST ANDARD CONE 1885703 3. EC STOP RING 1215735 4. EC SAFETY SLEEVE 1885709 5.
26861 226 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Drivelines RCM5015 & RCM6015 SERIES (1000 RPM) Driveli.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg26861 RPBY 826-244C 826-182C Rev . 2 Service Only EC CV JOINT 1 3/8-21 SPLINE 7106632 1. Re v . 1 RPBY 7106632 7600621 1. EC 10X80-DIN-1481 O/TUBE R/PIN 6331080 2. EC SOFT CONE 1886528 3.
14067 228 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Drivelines RCM5015 & RCM6015 SERIES (1000 RPM) Driveli.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg14067 PT O CV 2580 CA T5 1000 1 3/8-21 826-244C WS Y OKE 1 3/4-20 SPL.I.C. 2500 325027 1. WS Y OKE 1 3/8-21 SPL. AS 363696 2. WS GREASE ZERK 020672 3. WS DOUBLE Y OKE 2500 365725 4.
26858 230 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Drivelines RCM5015 & RCM6015 SERIES (1000 RPM) Driveli.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg26858 PT O CV 2580 CA T5 1000 1 3/4-20 826-245C WS Y OKE 1 3/4-20 SPL.I.C. 2500 325027 1. WS CV Y OKE 1 3/4-20 SPL 363729 2. WS GREASE ZERK 020672 3. WS DOUBLE Y OKE 2500 365725 4.
23948 232 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Drivelines RCM5015 & RCM6015 SERIES (1000 RPM) Driveli.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg23948 PT O CV V80X56.8 NO/CL 1 3/8-21 826-477C * COMER CV -JOINT Y OKE COLLER 141.028.359.1 1. COMER CV -JOINT CROSS ASSEMBL Y 180.018.158 2. COMER WIDE ANGLE DOUBLE Y OKE 141.
23960 234 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Drivelines RCM5015 & RCM6015 SERIES (1000 RPM) Driveli.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg23960 PT O CV80 X 77.71 NO CLUTCH 826-499C COMER COLLER Y OKE ASSEMBL Y 141.028.360.1 1. COMER CV -JOINT CROSS ASSEMBL Y 180.018.158 2. COMER WIDE ANGLE DOUBLE Y OKE 141.028.
23995 236 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Drivelines RCM5015 & RCM6015 SERIES (1000 RPM) Driveli.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg23995 Service Only EC CV JOINT 1 3/8-21 SPLINE 7106632 EC Y OKE W/QD 1006876 1. EC GO6 CROSS ASSEMBL Y 1006830 2. EC HOMOKINETIC JOINT 1006831 3. EC OUTER TUBE HOMOKINETIC Y OKE 1006827 4.
15513 238 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Drivelines RCM5015 & RCM6015 SERIES (1000 RPM) Driveli.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15513 EC CV JOINT 1 3/8-21 SPLINE 7600621 EC Y OKE ASSY . 1 3/8-21 SPLINE 1000619 1. Optional Y oke EC Y OKE ASSY 1 3/4-20 SPLINE 1000621 1. EC EC SPIDER ASSEMBL Y 1000630 2.
23957 240 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Drivelines RCM5015 & RCM6015 SERIES (1000 RPM) Driveline Slip Clutch (146.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg23957 COMER CLUTCH, COMPLETE ASSY 146.264.024.1 * COMER SPRING 180.014.022 1. COMER Y OKE, FLANGED 151.016.037.1 2. COMER BUSH 180.019.019 3. COMER LINING RING 180.019.018 4.
23958 242 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Drivelines RCM5015 & RCM6015 SERIES (1000 RPM) Driveline Slip Clutch (146.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg23958 COMER CLUTCH, DISC COMPLETE 146.284.020.1 * COMER SPRING 180.014.022 1. COMER Y OKE, FLANGED 151.018.016.1 2. COMER BUSH 180.019.019 3. COMER LINING RING 180.019.018 4.
17005 244 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Drivelines RCM5015 & RCM6015 SERIES (1000 RPM) Driveli.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg17005 WS FRICTION CLUTCH 383805 WS CLUTCH HOUSING 324822 1. WS FRICTION DISK 168556 2. WS HUB 1 3/4"-20 SPL 351793 3. WS DRIVE PLA TE 042454 4. WS DRIVE PLA TE 042459 5.
15523 246 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Drivelines RCM5015 & RCM6015 SERIES (1000 RPM) Driveli.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15523 EC CLUTCH FD2/6 1 3/4 20 SPL 1406016 EC CLUTCH SPRING 1215012 1. EC CLUTCH Y OKE W/FLANGE 1706033 2. EC CLUTCH BUSHING 1705009 3. EC CLUTCH LINING RING 1808010 4. EC HUB WITH FLANGE 1708017 5.
16966 248 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Drivelines RCM5015 & RCM6015 SERIES (1000 RPM) Driveli.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg16966 WS FRICTION CLUTCH 391359 WS CLUTCH HOUSING 324822 1. WS FRICTION DISK 168556 2. WS HUB 1-3/4"-20 SPL 391358 3. WS DRIVE PLA TE 042454 4. WS DRIVE PLA TE 042459 5.
15521 250 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Drivelines RCM5015 & RCM6015 SERIES (1000 RPM) Driveli.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15521 EC CLUTCH FD4/6 1 3/4 20 SPL 1446016 * RPBY 330-297A 1215012 1. EC CLUTCH Y OKE W/FLANGE 1706033 2. EC CLUTCH BUSHING 1705009 3. EC CLUTCH LINING RING 1808010 4. EC CLUTCH MIDDLE DISK 1708034 5.
23996 252 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Drivelines RCM5015 & RCM6015 SERIES (1000 RPM) Driveli.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg23996 PT O CA T .4 W/CLUTCH 1 3/4-20 826-185C * EC TUBE BEARING (INNER TUBE) 1786711 1. EC STIFFENING RING 1215733 2. EC SHORT CONE 1885702 3. EC ST OP RING 1215735 4. EC SAFETY SLEEVE 1885709 5.
15567 254 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Drivelines RCM5015 & RCM6015 SERIES (1000 RPM) Driveli.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15567 PT O CA T .4 W/CLUTCH 1 3/4-20 826-185C EC CROSS ASSEMBL Y 1006020 1. EC TUBE BEARING 1786009 2. EC INNER TUBE Y OKE 1706029 3. EC 10X80-DIN-1481 O/TUBE R/PIN 6331080 4.
17004 256 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Drivelines RCM5015 & RCM6015 SERIES (1000 RPM) Driveli.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg17004 PT O W2500/WSC CA T5 540/1000 826-262C WS LOCK NUT M16 304011 1. WS HEX BOL T M16 X 90 GR 8.8 702352 2. WS Y OKE 1 3/4-20 SPL.I.C. 2500 325027 3. WS CROSS & BEARING KIT 2500 312209 4.
23953 258 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 5: Drivelines RCM5015 & RCM6015 SERIES (1000 RPM) Driveli.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg23953 PT O V80 X 59.3 1280NM CLUTCH 826-481C COMER Y OKE COMPLETE 141.028.195.1 1. COMER CROSS ASSEMBL Y 180.018.004 2. COMER Y OKE OUTER 151.018.241.1 3. COMER OUTER TUBE ROLL PIN 190.
15601 260 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 6: Gearbox es RCM5015 & RCM6015 SERIES (1000 RPM) Gearbo .
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15601 RCM5015 GBO X RC130S 1.75-20 1:1.21 CW 826-176C RCM6015 GBOX RC130L 1.75-20 1:1.21 CW 826-233C RCM5015 (826-176C) OMNI HOUSING RC130S CW 010156 1. RCM6015 (826-233C) OMNI HOUSING RC-130LS 010167 1.
15510 262 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 6: Gearbox es RCM5015 & RCM6015 SERIES (1000 RPM) Gearbo .
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15510 RCM5015 GBO X RC130S 1.75-20 1.21:1 CW 826-177C RCM6015 GBOX RC130L 1.75-20 1.21:1 CW 826-234C RCM5015 (826-177C) OMNI HOUSING RC130S CW 010156 1. RCM6015 (826-234C) OMNI HOUSING RC-130LS 010167 1.
15511 264 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 6: Gearbox es RCM5015 & RCM6015 SERIES (1000 RPM) Gearbo .
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15511 RCM5015 GBO X RC130S 1.75-20 1:1.21 CCW 826-178C RCM6015 GBO X RC130L 1.75-20 1:1.21 CCW 826-235C RCM5015 (826-178C) OMNI HOUSING RC130C CCW 010157 1. RCM6015 (826-235C) OMNI HOUS .
21167 266 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 6: Gearbox es RCM5015 & RCM6015 SERIES (1000 RPM) Gearbo .
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg21167 RCM5015 GBO X RCM50 1.75-20 1:1.21 CCW 826-317C RCM6015 GBO X RCM60 1.75-20 1:1.21 CCW 826-322C RCM5015 (826-317C) CO HOUSING U0.125.0531.00 1. RCM6015 (826-322C) CO HOUSING U0.
21266 268 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 6: Gearbox es RCM5015 & RCM6015 SERIES (1000 RPM) Gearbo .
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg21266 RCM5015 GBO X RCM50 1.75-20 1:1.21 CCW 826-317C RCM6015 GBO X RCM60 1.75-20 1:1.21 CCW 826-322C RCM5015 (826-317C) HOUSING 16571-01 1. RCM6015 (826-322C) HOUSING 16572-01 1.
21167 270 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 6: Gearbox es RCM5015 & RCM6015 SERIES (1000 RPM) Gearbo .
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg21167 RCM5015 GBO X RCM50 1.75-20 1.21:1 CCW 826-318C RCM6015 GBO X RCM60 1.75-20 1.21:1 CCW 826-323C RCM5015 (826-318C) CO HOUSING U0.125.0531.00 1. RCM6015 (826-323C) CO HOUSING U0.
21266 272 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 6: Gearbox es RCM5015 & RCM6015 SERIES (1000 RPM) Gearbo .
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg21266 RCM5015 GBO X RCM50 1.75-20 1.21:1 CCW 826-318C RCM6015 GBO X RCM60 1.75-20 1.21:1 CCW 826-323C RCM5015 (826-318C) HOUSING 16571-01 1. RCM6015 (826-323C) HOUSING 16572-01 1.
21171 274 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 6: Gearbox es RCM5015 & RCM6015 SERIES (1000 RPM) Gearbo .
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg21171 RCM5015 GBO X RCM50 1.75-20 1:1.21 CW 826-319C RCM6015 GBO X RCM60 1.75-20 1:1.21 CW 826-324C RCM5015 (826-319C) CO HOUSING U0.125.0531.00 1. RCM6015 (826-324C) CO HOUSING U0.
21267 276 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 6: Gearbox es RCM5015 & RCM6015 SERIES (1000 RPM) Gearbo .
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg21267 RCM5015 GBO X RCM50 1.75-20 1:1.21 CW 826-319C RCM6015 GBO X RCM60 1.75-20 1:1.21 CW 826-324C RCM5015 (826-319C) HOUSING 16571-01 1. RCM6015 (826-324C) HOUSING 16572-01 1.
26958 278 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 6: Gearbox es RCM5015 & RCM6015 SERIES (1000 RPM) Gearbo .
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg26958 DIV OMNI/CO 1000RPM 1 3/4-20 826-180C * CO BOL T M10 X 35 8.8 8.1.1.00109 1. T OP COVER PLA TE 0.305.1300.00 2. CO BEARING 30209 RT A25 8.0.9.00143 3. CO SNAP RING 8.5.
15504 280 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 6: Gearbox es RCM5015 & RCM6015 SERIES (1000 RPM) Gearbo .
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15504 DIV OMNI/CO 1000RPM 1 3/4-20 826-180C * OMNI HOUSING RCD101HD 010063 1. OMNI INPUT CAP 020162 2. OMIN CANTILEVERED OUTPUT CAP 020061 3. OMNI OUTPUT CAP 020110 4. OMNI GEAR, 26T 030194 5.
15427 282 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 7: Hydraulics RCM5015 & RCM6015 SERIES (1000 RPM) Hydraul.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15427 RC5015 & RCM5015 CYL 3X8X1.25 ROD (TIE) NO PINS 810-195C 1. RC6015 & RCM6015 CYL 3.5X8X1.25 ROD (TIE R OD) 810-162C 1. CP 3/4FORB MALE QD 811-394C 2. HH3/8R1 168 3/4MORB 3/4FJIC 811-619C 3.
25899 284 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 7: Hydraulics RCM5015 & RCM6015 SERIES (1000 RPM) Hydraul.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg25899 CYL 2.5X12X1.25 ROD (TIE R OD) 810-150C * NUT HEX 3/8-16 PL T 803-014C 1. MON PISTON NUT 130556 2. LION PIN 134953 3. MON CLEVIS PIN CO TTER 135995 4. SCREW SET SH 3/8-16X3/8 TYPE C 801-023C 5.
25900 286 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 7: Hydraulics RCM5015 & RCM6015 SERIES (1000 RPM) Hydraul.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg25900 CYL 3.5X8X1.25 ROD (TIE R OD) 810-162C * NUT HEX 5/8-18 PL T 803-022C 1. MON PISTON NUT 130560 2. LION PIN 134953 3. MON CLEVIS PIN CO TTER 135995 4. SCREW SET SH 3/8-16X3/8 TYPE C 801-023C 5.
25902 288 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 7: Hydraulics RCM5015 & RCM6015 SERIES (1000 RPM) Hydraul.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg12345 CYL 3X12X1.25 ROD (TIE R OD) 810-312C * NUT HEX 1/2-13 PL T 803-020C 1. MON PISTON NUT 130560 2. SCREW SET SH 3/8-16X3/8 TYPE C 801-023C 3. PLUG 9/16-18UNF MORB SOCKET HD 186561 4.
12499 290 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 7: Hydraulics RCM5015 & RCM6015 SERIES (1000 RPM) Hydraul.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg12499 CYL 3X8X1.25 ROD (TIE) NO PINS 810-624C * MW BASE 3 X 3/4 SAE ORB PORT 6M4166 1. MW TIE ROD NUT 2A0014 2. Only found in sealkit 17 O-RING 3. MW TIE ROD 3 X 8 CYLINDER 7M4316 4.
25896 292 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 7: Hydraulics RCM5015 & RCM6015 SERIES (1000 RPM) Hydraul.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg25896 CYL 3X8X1.25 ROD (TIE) NO PINS 810-624C * NUT HEX 1/2-13 PL T 803-020C 1. MON PISTON NUT 130560 2. SCREW SET SH 3/8-16X3/8 TYPE C 801-023C 3. LION PLUG 3/4-16UNF SOCKET HD 186562 4.
12499 294 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 7: Hydraulics RCM5015 & RCM6015 SERIES (1000 RPM) Hydraul.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg12499 CYL 3X8X1.25 ROD (TIE) NO PINS 810-195C MW BASE 3 X 3/4 SAE ORB POR T 6M4166 1. MW TIE ROD NUT 2A0014 2. Only found in sealkit 17 O-RING 3. MW TIE ROD 3 X 8 CYLINDER 7M4316 4.
11421 296 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 7: Hydraulics RCM5015 & RCM6015 SERIES (1000 RPM) Hydraul.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg11421 CYL 3.5X8X1.25 ROD (TIE R OD) 810-162C BASE CROSS 1D1509-4 1. TIE ROD NUT CR OSS 2A0236-9 2. Only av ailable in Seal Kit (#19) O-RING 3. TIE ROD CR OSS 2A0581-1325 4. TIE ROD CR OSS 1D0009-1050 5.
11421 298 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 7: Hydraulics RCM5015 & RCM6015 SERIES (1000 RPM) Hydraul.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg19893 CYL 3.5X8X1.25 ROD (TIE R OD) 810-162C MW BASE (STD 1 PIN) 6M5142 1. MW TIE ROD NUT 2A0016 2. Only availab le in Seal Kit (#19) O-RING 3. MW ROD 7M5316 4. MW TUBE 3 1/2 X 8 CYLINDER 5M5116 5.
15572 300 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 7: Hydraulics RCM5015 & RCM6015 SERIES (1000 RPM) Hydraul.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15572 CYL 2.5X12X1.25 ROD (TIE R OD) 810-150C BASE CROSS 1D1505-3 1. CROSS NUT , CLEVIS & TIE ROD 2A0235-6 2. Only found in seal kit 19 MW O-RING 3. TIE ROD CR OSS 2A0578-1675 4.
15572 302 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 7: Hydraulics RCM5015 & RCM6015 SERIES (1000 RPM) Hydraul.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15572 CYL 2.5X12X1.25 ROD (TIE R OD) 810-150C MW BASE 6M3118 1. MW NUT CLEVIS & TIE ROD 2A0012 2. Only found in seal kit 19 MW O-RING 3. ROD MW TIE 7M3320 4. MW TUBE 5M3120 5.
15572 304 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 7: Hydraulics RCM5015 & RCM6015 SERIES (1000 RPM) Hydraul.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15426 CYL 3X12X1.25 ROD (TIE R OD 810-312C BASE CROSS 1D1505-3 1. CROSS NUT ,CLEVIS AND TIE ROD 2A0235-6 2. Only found in seal kit 20. O-RING 3. TIE ROD CR OSS 2A0578-1675 4.
15242 306 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 7: Hydraulics RCM5015 & RCM6015 SERIES (1000 RPM) Hydraul.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg11196 CYL 3X12X1.25 ROD (TIE R OD 810-312C MW CLEVIS STD . DUTY 1M6010 1. MW ROD 1-1/4 DIA. X 10 STR OKE 2M4418 2. MW HEAD CAP 3X1-1/4 RD 9/16SAE 3M4410 3. MW PISTON 3 DIA. 4M4104 4.
25519 308 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 7: Hydraulics RCM5015 & RCM6015 SERIES (1000 RPM) Hydraul.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg25519 HYDRA ULIC WING CONTROL ASSY . 318-316A * AD 9/16MJIC 811-315C 1. CP 3/4FORB MALE QD POPPET TYPE 811-394C 2.
19893 310 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 7: Hydraulics RCM5015 & RCM6015 SERIES (1000 RPM) Hydraul.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg19893 2-W A Y SELECTOR VL V KIT 312-316A HH1/4R1 265 1/2MNPT 9/16FJIC 811-358C 1. AD 1/2FNPTS 3/4MORB 811-021C 2. SELECT OR V AL VE 3-W A Y 2 POS 810-152C 3. AD 3/4MORB 3/4MJIC 811-088C 4.
11196 312 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 7: Hydraulics RCM5015 & RCM6015 SERIES (1000 RPM) Hydraul.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg11196 3-SPOOL V AL VE KIT 312-315A 3-SPOOL DIRECTION CONTR OL V AL V 810-167C 1. HH1/4R1 265 1/2MNPT 9/16FJIC 811-358C 2. AD 3/4MJIC 1/2FNPT 811-290C 3. EL 3/4MJIC X 3/4MNPT 811-359C 4.
15426 314 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 7: Hydraulics RCM5015 & RCM6015 SERIES (1000 RPM) Hydraul.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg15426 RC5015 & RCM5015 CYL 2.5X12X1.25 ROD (TIE R OD) 810-150C 1. RC6015 & RCM6015 CYL 3X12X1.25 ROD (TIE ROD) 810-312C 1. OREL 1/16 9/16MJIC 9/16MORB 811-337C 2. VENT PLUG - 9/16-18 PLA TED 800-117C 3.
25515 316 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 7: Hydraulics RCM5015 & RCM6015 SERIES (1000 RPM) Maunal .
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg25515 MECHANICAL WINCH 318-271A * WLDMT . WINCH 318-256H 1. HHCS 3/8-16X1 3/4 GR5 802-023C 2. HHCS 5/8-11X1 3/4 GR5 802-053C 3. NUT LOCK 3/8-16 PL T 803-013C 4. NUT HEX T OP LOCK 5/8-11 PL T 803-271C 5.
17564 318 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 8: Labels RCM5015 & RCM6015 SERIES (1000 RPM) Label Place.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg17564 RC5015 DECAL P ACKA GE 318-101A RCM5015 DECAL P ACKA GE 318-102A RC6015 DECAL P ACKA GE 318-183A RCM6015 DECAL P ACKA GE 318-184A DECAL W ARNING PINCH PT/CRUSH 818-045C 1.
Revision Comments P ar t Description P ar t No. Ref. DECAL D ANGER PTO DRIVELINE 818-552C 30. DECAL IMPORT ANT - SLIP CLUTCH 818-680C 31. FOLDING CUTTER SPEED WARNING 838-588C 32.
This P age Intentionally Left Blank 02/03/09 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 321 T able of Contents P ar t Number Index Section 8: Labels Land Pride RCM5015 & RCM6015.
20659 322 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 9: Options RCM5015 & RCM6015 SERIES (1000 RPM) Baffle Shr.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg20659 ASSY .BAFFLE/SHRD OMNI RC5015 318-311A ASSY .BAFFLE/SHRD COMER RC5015-6015 318-395A ASSY .BAFFLE/SHRD OMNI RC6015 318-436A (Shown)318-311A OMNI 5015 WELDMENT BLADE CARRIER OMNI 318-302H 1.
23949 324 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 9: Options RCM5015 & RCM6015 SERIES (1000 RPM) Shredder K.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg23949 ASSY 50/6015 SHREDDER COMER 318-949A * BLADE BUSHING 318-309D 1. WELDMENT BLADE CARRIER COMER 318-396H 2. ASSY CCW BLADES 59.5 COMER 318-946S 3. ASSY CCW BLADES 71.5 COMER 318-947S 4.
23950 326 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 9: Options RCM5015 & RCM6015 SERIES (1000 RPM) Shredder K.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg23950 ASSY 5015 SHREDDER OMNI 318-953A * WELDMENT BLADE CARRIER 318-302H 1. BLADE BUSHING 318-309D 2. ASSY CCW BLADES 59.5 OMNI 50 318-950S 3. ASSY CCW BLADES 71.5 OMNI 50 318-951S 4.
23951 328 RC5015, RCM5015, RC6015 & RCM6015 Rotary Cutters 318-047P 02/03/09 T able of Contents P ar t Number Index Land Pride Section 9: Options RCM5015 & RCM6015 SERIES (1000 RPM) Shredder K.
Revision Comments P ar t Description P ar t No. Ref. Drawing Image Number dwg23951 ASSY 6015 SHREDDER OMNI 318-957A * BLADE BUSHING 318-309D 1. WELDMENT BLADE CARRIER OMNI 318-435H 2. ASSY CCW BLADES 59.5 OMNI 60 318-954S 3. ASSY CCW BLADES 71.5 OMNI 60 318-955S 4.
The P ar t Number Index is a numeric inde x of all par t numbers included in this manual. The index sho ws what page(s) the par t is used on. Pa g e Part Number 105, 109, 267, 271, 275 0.121.7101.00 ........... 105, 109, 267, 271, 275 0.252.7525.00 ..
Pa g e Part Number 67, 73, 95, 219, 227, 255 1786008 .................... 67, 73, 95, 219, 227, 255 1786009 .................... 71, 73, 225, 227 1786527 .................... 65, 71, 93, 217, 225, 253 1786710 .................... 65, 71, 93, 217, 225, 253 1786711 .
Pa g e Part Number 53, 207 318-130D ................... 41, 43, 53, 195, 197, 207 318-131D ................... 41, 195 318-132D ................... 41, 195 318-133D ................... 41, 195 318-134D ................... 53, 207 318-136D ............
Pa g e Part Number 121, 123, 287, 289 492652 ...................... 127, 293 492670 ...................... 127, 293 492675 ...................... 121, 287 492676 ...................... 121, 287 492677 ...................... 119, 285 492688 ...........
Pa g e Part Number 13, 15, 20, 25, 103, 115, 151, 804-013C ................... 167, 169, 174, 179, 281, 317 13, 15, 27, 31, 37, 167, 169, 181, 185, 191 804-015C ................... 13, 16, 27, 31, 37, 167, 170, 181, 185, 191 804-016C .................
Pa g e Part Number 170, 221 826-247C ................... 15, 61 826-260C ................... 169, 215 826-261C ................... 20, 97, 174, 257 826-262C ................... 15, 19, 105, 107 826-315C ................... 15, 19 826-315C81 ..........
Great Plains Manufacturing, Inc. Corporate Office: P .O. Box 5060 Salina, Kansas 67402-5060 USA www .landpride.com.
An important point after buying a device Land Pride RC6015 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Land Pride RC6015 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Land Pride RC6015 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Land Pride RC6015 you will learn all the available features of the product, as well as information on its operation. The information that you get Land Pride RC6015 will certainly help you make a decision on the purchase.
If you already are a holder of Land Pride RC6015, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Land Pride RC6015.
However, one of the most important roles played by the user manual is to help in solving problems with Land Pride RC6015. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Land Pride RC6015 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center