Instruction/ maintenance manual of the product RC 55 Land Pride
Go to page of 2
14 www.landpride.com ROTARY CUTTERS • Smooth top design • 15’ Cutting width • 7 Gauge bottom, 10 gauge top • Pull-Type, self leveling hitch and clevis • 2” - 14” Cutting height • 3-1/2” Cutting capacity • Shredder kit available • Cat.
15 • Left hand weight box • 10” deck height • Optional hitch configurations • 2-3/8” Gearbox output shaft • 5-Bolt cast iron wheel hubs Our center skid shoes allow the cutter to “glide” over bumps and undulations and can be mounted in two locations to fit your terrain or tractor tire width.
An important point after buying a device Land Pride RC 55 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Land Pride RC 55 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Land Pride RC 55 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Land Pride RC 55 you will learn all the available features of the product, as well as information on its operation. The information that you get Land Pride RC 55 will certainly help you make a decision on the purchase.
If you already are a holder of Land Pride RC 55, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Land Pride RC 55.
However, one of the most important roles played by the user manual is to help in solving problems with Land Pride RC 55. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Land Pride RC 55 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center