Instruction/ maintenance manual of the product KXB200H/HR Kustom
Go to page of 12
Congratulations on the purchase of your new Kustom bass amplier . Y our KXB Model draws on decades of amp design and manufacturing experience at Kustom. This model was built from the gr ound up to offer world-class tone, useful features and r eliable performance.
FCC Statements 1. Caution: Changes or modications to this unit not expressly appr oved by the party responsible for compliance could void the user’ s authority to operate the equipment. 2. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
kustom.com ENGLISH.
kustom.com FRENCH.
1. 0 dB Input: ¼-inch input that is intended for bass guitars with standard, passive electr onics. 2. –6 dB Input: ¼-inch input that is optimized for bass guitars with active electronics. 3. Gain: Controls the input level to the pr eamp. Set so Clip indicator light is not lit, otherwise distortion may occur .
kustom.com / KXB200H HR Speaker Outputs: These are two-conductor , ¼-inch exter nal speaker jacks. These jacks ar e wired in a parallel conguration. Use them to connect the amplier head to speaker cabinets with a minimum total impedance of 4 ohms.
kustom.com KXB200H/HR AC Mains.
KXB200H/HR Suggested Settings The following suggested settings will help you dial in a variety of popular tones. Keep in mind, these are starting points to get you up and running with your KXB amplier . Feel fr ee to experiment to achieve your own signature sounds.
Kustom ® KXB200H/HR Specications Output Power 200 W atts 4 Ohms at 5% THD+N Input Impedance Dual Input 0 dB: 500K Ohm, -6dB: 95K Ohm Gain 75 dB Gain and Master at Max, All EQ at 12 o’clock S/N R.
kustom.com KXB200H/HR Signal Flow Diagram.
kustom.com 19 November 2009 KXB200H/HR.
www .kustom.com Kustom Amplication, Inc. 3015 Kustom Drive Hebron, Kentucky USA 41048 888-4-KUSTOM (888-458-7866) All specications are subject to change without prior notice.
An important point after buying a device Kustom KXB200H/HR (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Kustom KXB200H/HR yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Kustom KXB200H/HR - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Kustom KXB200H/HR you will learn all the available features of the product, as well as information on its operation. The information that you get Kustom KXB200H/HR will certainly help you make a decision on the purchase.
If you already are a holder of Kustom KXB200H/HR, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Kustom KXB200H/HR.
However, one of the most important roles played by the user manual is to help in solving problems with Kustom KXB200H/HR. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Kustom KXB200H/HR along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
