Instruction/ maintenance manual of the product V4 KRK
Go to page of 14
USER GUIDE KRK MODEL V-4 VIDEO SHIELDED BI-AMPLIFIED STUDIO MONITOR KRK SYSTEMS, LLC. 5452 BUSINESS DRIVE HUNTINGTON BEACH, CA. 92649 TEL: (714) 373-4600 FAX: (714) 373-0421 WEB SITE: WWW.
1 Contents Page Introduction/ Features Overview • • • • • • • • • • • • • • • • • • • • 1 System Controls • • • • • • • • • • • • • .
2 SYSTEM GAIN Input sensitivity is adjusted (counterclockwise reduces sensitivity) through a rear panel mounted trim control. Adjustment range is from -30dB to +6dB.
3 NEUTRIK ® COMBO CONNECTOR The Neutrik ® Combo connector accommodates ¼” phone plugs, XLR, TRS. Please note that PIN 2 is hot! If you are using an unbalanced connection make sure and wire PIN 1 and PIN 3 together at the source end. Installing Your Monitors The close-field monitor, by definition, reduces room interaction.
4 Mid-Field Configuration – This configuration is basically the same as the Close-Field set-up. (see Figure 2) It is normally used with larger monitors or when the monitors are too large or heavy for the meter bridge. This set-up has the potential for a larger sweet spot and better spatia l imaging.
5 5.1 CHANNEL SURROUND SET-UP Begin set-up by placing the Left and Right front channels 30º degrees from the Center channel and equidistant to the listening position ( Figure 4 ). The Left Surround (Rear) and Right Su rround (Rear) channels should be placed 110º degrees from the Center channel.
6 Design Goals KRK’s design goal for your V-4 was to create a monitor capable of accurately reproducing sound with clarity and accuracy. Other monitors in the marketplace tend to mod ify, extend, or “tilt” their response above 1 kHz to sound more “spatial, exciting and impressive”.
7 Troubleshooting Problem: If there is no power, check to see if... • The power cord is plugged into both the IEC socket on the rear panel of the unit and into the AC mains • The AC mains voltage is matched to the operating voltage requirements (See Changing Voltage in the Connecting the System section on page 3).
8 • Once you have a better idea of what may be at fault then call us and speak with someone in the service department. They will help you determine the best solution to correct your monitors. The service department can be reached at (714) 373-4600 ext.
9 Specifications THE V-4 POWERED STUDIO MONITOR Frequency Response 65Hz -20Hz ± 2dB High Frequency Driver 1” (25mm) Fabric Dome Low Frequency Driver 4” (100.4mm) Woven Kevlar ® , High Sensitivity Voice Coil Dimensions 6” W x 9-1/4” H x 7-3/4” D (152mm W x 235mm H x 197mm D) Net Weight 9 lbs.
10 Safety Instr uctions: English This symbol is intended to alert the user of import ant operating and maintenance (servicing) instructions in the literature provided with the equipment.
11 Explana tion of gr aphical symbols The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to humans.
12 Consignes de Securite: F rancais Ce symbole sert à avertir l’utilisateur que la docum entation fournie avec le matérial contient des instructions importantes concernant l’exploitation et la m.
13 Explica tion des symboles gr aphiques Le symbole “éclair” avec fléche à l’intérieur d’un triangle équilatéral est utilisé pour alerter l’utilisateur de la presence à l’intérieur du coffret de “voltage danger eux” non isolé d’ampleur suffisante pour constituer un risque d’elétrocution.
An important point after buying a device KRK V4 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought KRK V4 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data KRK V4 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, KRK V4 you will learn all the available features of the product, as well as information on its operation. The information that you get KRK V4 will certainly help you make a decision on the purchase.
If you already are a holder of KRK V4, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime KRK V4.
However, one of the most important roles played by the user manual is to help in solving problems with KRK V4. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device KRK V4 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
