Instruction/ maintenance manual of the product KAV-250cd/2 Krell Industries
Go to page of 24
The Leader in Audio Engineering KAV-250cd/2 Front Loading Compact Disc Player Instructions for Use Owner’s Reference.
KAV-250cd/2 Front Loading Compact Disc Player Instructions for Use CONTACT INFORMATION Krell Industries, Inc. 45 Connair Road Orange, CT 06477-3650 USA TEL 203-799-9954 FAX 203-891-2028 E-MAIL krell @ krellonline.
Contents INTRODUCTION Read This First DEFINITION OF TERMS UNPACKING PLACEMENT AC Power Guidelines FRONT PANEL DESCRIPTION BACK PANEL DESCRIPTION REMOTE CONTROL DESCRIPTION Battery Installation and Rem.
Illustrations FIGURE 1 FIGURE 2 FIGURE 3 The KAV-250cd/2 Front Panel The KAV-250cd/2 Back Panel The KAV-250cd/2 Remote Control Page 5 8 11 iv Krell KAV-250cd/2.
Introduction READ THIS FIRST Thank you for your purchase of the Krell KAV-250cd/2 Front Loading Compact Disc Player. The KAV-250cd/2 features a high precision disc transport mechanism and high performance analog circuitry that provide Krell sound quality at an exceptional value.
Definition of Terms INPUT AND OUTPUT CONNECTIONS OPERATION Following are the definitions of key terms used in your owner’s refer- ence manual. Balanced A symmetrical input or output circuit that has equal impedance from both input terminals to a common ground reference point.
Unpacking Follow these steps to safely unpack your amplifier: Open the shipping box and remove the top layer of foam. You see these items: 1 KAV-250cd/2 1 IEC connector (AC power) cord 1 12 VDC (12 V .
Placement Before you install the KAV-250cd/2 into your system, review the following guidelines to choose the location for the KAV-250cd/2. This will facilitate a clean, trouble-free installation. The KAV-250cd/2 does not require any type of special rack or cabinet for installation.
Figure 1 The KA V-250ccY2 Front Panel 3 4 5 6 POWER 2 7 8 9 KAV-250cd/2 11 10 12 Power 1 Power Button 2 Power LED 3 Stand-by LED Transport Functions 4 Stop Button 5 Play Button 6 Pause Button 7 Open/C.
Front Panel Description See Figure I on page 5 POWER 1 Power Button Use this button to switch the KAV-250cd/2 between the stand-by and the operational modes. 2 Power LED The blue power LED illuminates when the KAV-250cd/2 is in the operational mode. The power LED also flashes when any remote control key is pressed.
Front Panel Description continued DISPLAY 10 Front Panel Display The front panel display shows the track number of the currently play- ing compact disc as well as programming status. 11 Infrared Sensor The infrared sensor receives commands from the KAV-250cd/2 remote control.
Figure 2 The KA V-250ccY2 Back Panel ~ O Q 5W60Hz RC-5 j~12VDC’~ I IN OUT IN 20 21 17 18 19 ~ DIGITAL OUI~PUTS ~ ~ o 13 14 KAV-250cd/2 Compact Disc Player KRELt~ INDUSTRIES, INC, 45 CONNAIR ROAO ORANGE, CT 06477-3650 USA r RIGHT 15 .
Back Panel Description See Figure 2 on page 8 DIGITAL OUTPUTS 13 Optics Digital Output The KAV-250cd/2 is equipped with an EIAJ fiber optic digital output with a TosLink connector. 14 Coax(ial) Digital Output The KAV-250cd/2 is equipped with an S/PDIF coaxial digital output with an RCA connector.
Back Panel Description continued POWER 20 IEC Connector The connector is for use with the provided IEC standard 15 amp power cord. 21 Line Fuse The 50/60 Hz line fuse protects the KAV-250cd/2 against .
Figure 3 The KA V-250ccY2 Remote Control Power 22 Pwr (Power) Key Compact Disc Transport Functions 23 CD Key 24 Display Key 25 Direct Number Access Keypad 26 Pause Key 27 Play Key 28 Stop Key 29 Open .
Remote Control Description See Figure 3 on page 11 Battery Installation and Removal The KAV-250cd/2 remote control uses two AAA-size batteries, which are included with the shipment. 1. Remove the backplate, by sliding it off the remote control. 2. Install the batteries, following the battery position diagram on the plastic battery receptacle.
Remote Control Functions continued COMPACT DISC TRANSPORT FUNCTIONS continued 25 Direct Track Access Keypad Use the direct track access keypad to select a compact disc track. Tracks consisting of two digits must be pressed within eight seconds of each other.
Connecting the KAV-250cd/2 to Your System USING BALANCED CONNECTIONS Connection Steps Krell recommends using balanced interconnect cables. Balanced interconnect cables not only can minimize sonic loss but are also immune to induced noise, especially with installations using long cables.
Operating Your KAV-250cd/2 This section provides detailed information about operating the KAV-250cd/2. Power On After the KAV-250cd/2 is connected to AC power and is in the stand- by mode, use the power button or key to switch the component to the operational mode.
How to Program a Track Sequence This short term programming lets you store a maximum of twenty tracks in a program sequence. 1. Use the direct number access keypad or the track forward and back keys to select a track. 2. Press the program key to store the selected track.
How to Program a Track Sequence continued How to Clear a Programmed Track Sequence Press the power key. This places the KAV-250cd/2 in the stand-by mode and erases the programmed sequence. Note You can also clear the programmed sequence by opening and closing the compact disc transport.
Warranty To register your product for warranty benefits, please complete and return the Warranty Registration Card enclosed in the shipping box within 15 days of purchase. Thank you. This Krell product has a limited warranty of five years for parts and labor on cimuitry and three years for parts and labor on all mechanical components.
Return Authorization Procedure HOWTO EXPEDITE SERVICE If you believe there is a problem with your component, please con- tact your dealer, distributor, or the Krell factory to discuss the problem before you retum the component for repair.
Krell Industries, Inc. 45 Connair Road Orange, CT 06477-3650 USA TEL 203-799-9954, FAX 203-891-2028 E-MAIL krell@krellonline.com WEB SITE www.krellonline.com KAV-250cd/2 Front Loading Compact Disc Player v 00.0 Specifications All operational features, functions, specifications, and policies are sub- ject to change without notification.
An important point after buying a device Krell Industries KAV-250cd/2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Krell Industries KAV-250cd/2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Krell Industries KAV-250cd/2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Krell Industries KAV-250cd/2 you will learn all the available features of the product, as well as information on its operation. The information that you get Krell Industries KAV-250cd/2 will certainly help you make a decision on the purchase.
If you already are a holder of Krell Industries KAV-250cd/2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Krell Industries KAV-250cd/2.
However, one of the most important roles played by the user manual is to help in solving problems with Krell Industries KAV-250cd/2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Krell Industries KAV-250cd/2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
