Instruction/ maintenance manual of the product CD-1 Krell Industries
Go to page of 14
.
A. INTRODUCTION Welcome to the Krell family of audio components. You have joined a select group of discriminating listeners who enjoy the finest in music reproduction. Krell Digital is dedicated to the development of techno- logically advanced components for the reproduction of digitally recorded music.
B. TABLE OF CONTENTS 3 4 5 6 7 9 12 14 FCC COMPLIANCE STATEMENT UNPACKING AND ASSEMBLY BASIC INSTALLATION AND OPERATION OPERATION OF THE CD TRANSPORT REMOTE CONTROL QUESTIONS AND ANSWERS SPECIFICATION.
C. FCC COMPLIANCE STATEMENT WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compli- ance could void the user’s authority to operate the equip- ment. Note: This equipment has been tested and found to com- ply with the fimlts for a Class B digital device, pursuant to Part 15 of the FCC Rules.
D. UNPACKING AND ASSEMBLY 1. Open the box and remove the top layer of protective foam. The following items will now be visibIe: 1 1 1 3 1 CD-1 integrated CD player AC power cord ’ CD- 1RC RemOte Con.
E. BASIC INSTALLATION AND AND CONNECTIONS 1. Place the unit on a clean level surface away from excessive heat, moist.ure or light. Ideally, the CD-1 should be placed on the top of an audio component stacl~, on top of a cabinet, or any rigid open-air platform.
Care should be taken in selecting the type of cable used to link the CD- 1 to your processor. If coaxial cable is to be used it should be 75o1~m, non-capacitive, with a band- width in excess of 10MHz to prevent dropout errors. CAUTION: The CD-1 digital output is not designed to connect directly to any preamp or analog signal proces- sor.
G. REMOTE CONTROL 1. Operating functions of the Remote Control are de- scribed below: The PLAY button will start playing the disc from track 1. The STOP/CM button will stop the disc from playing and clear all program memory. The NEXT button will move forward one track.
c. Once you have finished your programming, push the PROGR button again. The mactiine will review the tracks you have selected. - d. Press the PLAY button and the program will begin. Press STOP to defeat the Program function. e. Press the REPEAT button and the machine will pla.
H. QUESTIONS AND ANSWERS Q. I have installed the CD-1 but the "Error" signal flashes when I press PLAY. What should I do? A. 1. Check to see if you removed the transport screws from the bottom of the unit as stated in the UNPACKING AND ASSEMBLY section of this manual.
Q. How do I gain access to a specific index with in a track? A. Start the disc playing and press the Scan Forward button until the next sequential index number appears in the display under the index column. Q. I own many CD’s which have CD Rings on them.
I. SPECIFICATIONS TRANSPORT Philips CDM-1 MK II with Hall effect motor; swing-arm design in a unicast frame. LASER Single beam with glas~: lens. DAC Single Bit with 20 Bit resolution DIGITAL OUTPUTS 1 Fibre Optic via standard interface 1 Coaxial via RCA connector.
¯ l. WARRANTY AND SERVICE INFORMATION There are no user-serviceable parts inside the CD-1. The CD-1 has a limited w, arra.nty of t~h.ree years parts and " labor on transport-relatecl parts, five years parts and labor on electronic parts, in~!udIng return freight.
0 / 0 / 0 I 0 I 0 / DIGITAL INC. KRELL DIGITAL INC. 35 HIGGINS DRIVE MILFORD CT 06460 SALES 203-874-3139 FAX 203-878-8373 COPYRIGHT 1991 KRELL DIGITAL INC.
An important point after buying a device Krell Industries CD-1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Krell Industries CD-1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Krell Industries CD-1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Krell Industries CD-1 you will learn all the available features of the product, as well as information on its operation. The information that you get Krell Industries CD-1 will certainly help you make a decision on the purchase.
If you already are a holder of Krell Industries CD-1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Krell Industries CD-1.
However, one of the most important roles played by the user manual is to help in solving problems with Krell Industries CD-1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Krell Industries CD-1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
