Instruction/ maintenance manual of the product EKTAPRO Kodak
Go to page of 16
KODAK EKT APRO 320 Slide Pr ojector Bedienungsanleitung Instruction Manual Mode d’emploi Manual de Instrucciones Istruzioni per l’uso Gebruiksaanwijzing Bruksanvisning Käyttöohje.
.
14 Pr ojector -Featur es Electrical Approvals The KODAK EKTAPRO 320 Slide Projector complies with Inter- national Safety requirements and bears the following safety marks: UL (Underwriter Laboratories Inc.
15 english Important Safety Precautions When using your equipment, basic safety precautions should always be followed, including the following: 1. Read and understand all instructions before using. 2. Always use the correct voltage, as described on page 16.
16 . Connect your EKTAPRO Slide Projector to the mains with the mains lead . (UK users note: A suitable fused 13A plug must be fitted. See instructions on cable!) . Turn on the mains switch (10). The projector is switched on and ready for use. Lamp and fan are switched on.
17 Loading and installing the slide tray 2. 3. Tray positioning index mark With the higher light ouput of the Extra Bright Lamp Module the temperature in the slide gate rises. To enable a smooth oper- ation following hints should be consid- ered: 1. Use only light respectively light gray slide mounts (e.
18 Place the projector on a firm, vibration free base for stable and smooth operation. For professional use we recommend the special projection racks available from deal- ers. The projector may be elevated plus or minus 30 o from the horizontal along the projection axis.
19 Changing the slide tray (in zero position) Removing the slide tray (in any position) 2. 3. Always lift off the slide tray in the zero position! Move tray to zero position: a) Using the slide change button on your projector or remote control units Hold the slide transport- backwards button down.
20 Simultaneous Projection 1. With the KODAK EKTAPRO Twin Socket Adapter (accessory) You can connect two projectors in parallel using the Twin Socket Adapter and an EKTAPRO Twin Socket Connecting cable (accessory). The adapter is inserted into the remote control socket (4).
21 WARNING: Before pulling out the lamp module, switch off the projector and unplug the mains lead first! For lamp replacement let the module cool down before touching the lamp and the surrounding area. Do not place the hot lampmodule on heat sensitive surfaces.
22 Possible problems during operation Accessories KODAK Slide Projection FF Lenses (lens summary, page 85) KODAK EKTAPRO Lens Support European CAT No. 715 1335 KODAK EKTAPRO 80 Slide Tray European CAT No. 712 8580 KODAK EKTAPRO Cable Remote (4 m) European CAT No.
23 Illumination Extra Bright Lamp Module with 82V/70h/ 300W halogen lamp with integrated cold light reflecting mirror. Projector Measurements (see page 88): Length: 340 mm Width: 336 mm Height: 140 mm Height with tray: 175 mm Weight without tray: approx.
84 Kodak Diamagazin Register -80 T ray Index Card-80 Identification magasin 80 Indice para Bandeja-80 Sequenza diapositive nel caricatore da 80 Diamagazijn register -80 Index f.
85 Pr ojektor -Übersicht KODAK Projektionsobjektive KODAK Projection Lenses Objectifs Kodak KODAK Objetivos Obiettivi Kodak KODAK EKT APRO objectieven KODAK EKT APRO objektiv .
88 175.
Germany: Kodak Aktiengesellschaft D-70323 Stuttgart KODAK, CAROUSEL, EKTAGRAPHIC and EKTAPRO are registered trademarks. 620 4361-0597, G&S 0192/97 Printed in Germany. For more information on this or any other KODAK PRESENTATION TECHNOLOGIES Product, check the Internet at www.
An important point after buying a device Kodak EKTAPRO (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Kodak EKTAPRO yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Kodak EKTAPRO - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Kodak EKTAPRO you will learn all the available features of the product, as well as information on its operation. The information that you get Kodak EKTAPRO will certainly help you make a decision on the purchase.
If you already are a holder of Kodak EKTAPRO, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Kodak EKTAPRO.
However, one of the most important roles played by the user manual is to help in solving problems with Kodak EKTAPRO. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Kodak EKTAPRO along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
