Instruction/ maintenance manual of the product Tandem 70 Anton/Bauer
Go to page of 11
® A7595-0310 Rev D DA-C130 Sht 1 of 12 Top Edge of Paper is used as a Cropmark. TANDEM Charger / Power Supply OWNER’S MANUAL Artwk Design Supplier Approvals M. O’Donnell 7/19/07 Anton/Bauer C. Hultman 7/19/07 L. Teodosio 7/23/07 Drafted By J. Teodosio 7/20/07 A.
TABLE OF CONTENTS INTRODUCTION .......................................................................................... 1 A7595-0310 Rev D DA-C130 Sht 3 of 12 FEATURES .................................................................................
1 INTRODUCTION The Tandem is the smallest and lightest p ackage available in both a charger and on- camera power supply. It incorporat es all of the Logic Series ® circuits that are employed i n every Anton/Bauer ® charger.
2 SAFEGUARDS Power Sources: This unit was designed to operate at ma ins voltages from 120 to 240 Volts AC, 50-60 Hz. Risk of Electrical Shock: Refer servicing to quali fied service personnel. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
3 Charging As with all Anton/B auer chargers, charging with Tandem is fully aut omati c. Mount any Logic Series battery to the Tand em and it will automatically determine and execute the appropriate charge routine.
4 Three Stage Charging Methodology In general, the Tandem will deliver a three stage charge routine to each battery. 1. Stage One will deliver a high rate charge matched to th e capabilities of the battery (typi cally a one or two hour rate , depending on battery type).
5 LED Indications The Tandem has three LEDs one red (charger), two green (ready and st atus). The st atus green LED indicates three stat es; 1) solid green LED indicates Tandem is operating as a charger. 2) Flashing status green LED i ndi cates Tandem is operat ing as a power supply .
6 OPERATION AS DC CAMERA SUPPLY FROM MAINS The Tandem will aut omaticall y operate as a DC power supply once the cam era, or other device is turned on. There are no switches, it is fully automatic. The single green LED will light i ndicating t hat the unit is operating as a power suppl y.
7 FCC NOTICE This equipment has been tested and found to com ply with the lim its for a Class A digital device pursuant to Part 15 of the FCC R u les. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a comm ercial environment.
8 LIMITED WARRANTY This one (1) year lim ited warranty for the product sp ecified in this document (“Product”) is given by Anton/Bauer, Inc. (“Anton/Bauer”), 14 Progr ess Dr ive, Shelton, Connecticut 06484.
7595-0310 Rev D A7595-0310 Rev D DA-C130 Sht 12 of 12 Top Edge of Paper is used as a Cropmark. The power behind the best cameras capturing the best images in the world. sm The worldwide standard ® ® The following are trademarks of Anton/Bauer, Inc.: The following are trademarks of Anton/Bauer, Inc.
An important point after buying a device Anton/Bauer Tandem 70 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Anton/Bauer Tandem 70 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Anton/Bauer Tandem 70 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Anton/Bauer Tandem 70 you will learn all the available features of the product, as well as information on its operation. The information that you get Anton/Bauer Tandem 70 will certainly help you make a decision on the purchase.
If you already are a holder of Anton/Bauer Tandem 70, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Anton/Bauer Tandem 70.
However, one of the most important roles played by the user manual is to help in solving problems with Anton/Bauer Tandem 70. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Anton/Bauer Tandem 70 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
