Instruction/ maintenance manual of the product NSK 4000 II Antec
Go to page of 10
NSK 4000 II / NSK 4480 II / NSK 4480B II User’s Manual.
Table of Contents Introduction 1.1 Case Specifications ………………...……………......………….....… 2 1.2 Diagram……………………………………………....…......…….....… 2 Hardware Installation Guide 2.1 Setting Up……….
1 At Antec, we continually refine and improve our products to ensure the highest quality. It’s possible that your new case will differ slightly from the descriptions in this manual. This isn’t a problem; it’s simply an improvement. As of the date of publication, all features, descriptions, and illustrations in this manual are correct.
2 1.1 Case Specifications 1.2 Diagram 1. 120mm rear TriCool™ exhaust fan 2. Front 80mm fan slot (optional) 3. Motherboard mount: Mini-ITX, microATX or Standard ATX 4. EarthWatts 380W ATX12V v2.2 power supply – NSK 4480 II / NSK 4480B II only 5. 3 x 5.
3 Hardware Installation Guide This manual is not designed to cover CPU, RAM, or expansion card installation. Please consult the motherboard manual for specific mounting instructions and troubleshooting. Before proceeding, check the manual for your CPU cooler to find out if there are steps you must take before installing the motherboard.
4 6. Connect the appropriate connector(s) from the power supply to the hard drive(s). 2.4 5.25” Device Installation There are three external 5.25” drive bays. 1. Looking from the rear of the case you can see metal grills covering the 5.25” drive bays.
5 3.2 AC’97/HD Audio Ports There is an Intel® standard 10-pin AC’97 connector and an Intel® 10-pin HDA (High Definition Audio) connector linked to the front panel of the case.
6 3.4 Rewiring Motherboard Header Connectors There may come a time when you need to reconfigure the pin- out of a motherboard header connector. Examples could be for your USB header, audio input header, or some other front panel connector such as the Power Button connector.
7 Speed (RPM) Input Current Air Flow Static Pressure Noise Input Power High 2000 0.24A (max.) 2.24 m³ / min (79 CFM) 2.54mm-H 2 O (0.10inch-H 2 O) 30 dBA 2.9 W Medium 1600 0.2A 1.59 m³ / min (56 CFM) 1.53mm-H 2 O (0.06inch-H 2 O) 28 dBA 2.4 W Low 1200 0.
Antec, Inc. 47900 Fremont Blvd. Fremont, CA 94538 USA tel: 510-770-1200 fax: 510-770-1288 Antec Europe B.V. Stuttgartstraat 12 3047 AS Rotterdam The Netherlands tel: +31 (0) 10 462-2060 fax: +31 (0) 10 437-1752 Customer Support: US & Canada 1-800-22ANTEC customersupport@antec.
An important point after buying a device Antec NSK 4000 II (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Antec NSK 4000 II yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Antec NSK 4000 II - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Antec NSK 4000 II you will learn all the available features of the product, as well as information on its operation. The information that you get Antec NSK 4000 II will certainly help you make a decision on the purchase.
If you already are a holder of Antec NSK 4000 II, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Antec NSK 4000 II.
However, one of the most important roles played by the user manual is to help in solving problems with Antec NSK 4000 II. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Antec NSK 4000 II along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
