Instruction/ maintenance manual of the product G60 Kidco
Go to page of 10
Elongate Model G60 for openings 45” to 60” wide Use 1 optional 24” extension (Model G24) when opening is 5’ to 7’ wide Use 2 optional 24” extension (Model G24) when opening is 7’ to 9’.
FOLLOW THESE INSTRUCTIONS CAREFULLY AND KEEP THEM FOR FUTURE REFERENCE This gate is designed for children from 6 months to 36 months. Since each child’s skills develop at different ages, these age parameters should be monitored against your child’s own development.
Hinge Side Hardware Locking Side Hardware 2 Hinge bottoms (c) 0 P 2 Locking latches (e) If 2 Hinge spindles with locknuts (I) 2 Locking latch brackets (f) I!!8 2 Springs (k) I 1 Bottom latch spindle 6.
4 important: Gate must be installed in a struc- turally sound opening. Hinge side of gate must be mounted to a rigid surface. Ensure mounting surface (wall, door frame, stairpost etc.) is strong, rigid and has an even surface. If using gate on a stairway it must be placed either on top stair or on lowest stair at bot- tom.
Screw hinge spindles (I) into top and bottom rails of second section (o) until they are extended equally. These will be adjusted to correct length at a later stage so do not tighten. Mounting Locking Side Screws provided are for mounting directly into wood.
The correct width will be reached by adjus- ting gate sections and all four corner spind- les. Each spindle adjusts individually and may be extended to varying lengths to allow for molding, uneven walls, etc. Spindles may be extended a minimum af 1” but not more than 4” on each side.
Center gate in opening. Gaps on each side should be equal. Place hinge spindles (I) over hinge bottom posts (c), dropping them into place. Adjust latch spindles out until they fit securely into the two locking brackets. Latch spindles must be adjusted so they click under locking latch when in closed position.
A protective plastic cover (h) is provided for the top latch spindle. Cut cover, remove latch spindle and put cover on. Return spindle and adjust to correct length.
Safety foot To open walk through section, press down on top locking latch, lift walk through section so hinge is raised (a), and slide out of bracket. Note: The gate should always be in locked position. If gate is open and excessive pressure is applied, hinge posts are desig- ned to break to prevent structural dama- ge.
KIDCO LIMITED WARRANTY Yo ur Kid Co pro du ct is wa rr an te d to be fr ee fro m man uf a ct ur in g de fe ct s fo r a pe ri od of on e ye ar from date of pur ch as e und er norm al use and in com pl ia nc e wit h the ope ra ti ng inst ru c- tio ns .
An important point after buying a device Kidco G60 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Kidco G60 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Kidco G60 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Kidco G60 you will learn all the available features of the product, as well as information on its operation. The information that you get Kidco G60 will certainly help you make a decision on the purchase.
If you already are a holder of Kidco G60, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Kidco G60.
However, one of the most important roles played by the user manual is to help in solving problems with Kidco G60. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Kidco G60 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
