Instruction/ maintenance manual of the product G10 Kidco
Go to page of 6
Gateway Model G1 0 for openings 28” to 34” Optional 6” Extension (Model G6) available for openings 34” to 40” Optional 12” Extension (Model G 1 2) available for openings 40” to 46” Onl.
FOLLOW THESE INSTRUCTIONS CAREFULLY AND KEEP THEM FOR FUTURE REFERENCE This gate is designed for children from 6 months to 36 months. Since each child’s skills develop at different ages, these age parameters should be monitored against your own child’s development.
Button Spindle housing Spindle D (already fittec 0 Spindle A / Handle 7~~ Walk through section 1 - = 1L - Hinge n Spindle C Safety foot , Wrench / Bi T 1 Pressure indicator/Wrench Note: To prevent over extension of spindles, notches have intentionally been cut into the threads approximately 3 1/4" from the pad ends.
Optional 6” or 12” extensions are available for larger openings. Only one extension recommended per gate. If using gate on a stairway, it must be placed either on top stair or on lowest stair at bottom. Push spindles A, B, C into three corners of gate.
Close walk-through so safety foot is above bottom rail but do not lower handle. Pull out spindle C until it touches mounting surface. Tighten nut towards the gate frame until safety foot rests on bottom rail. If hinge starts to lift, nut is too tight and should be loosened until hinge is back in position.
To Open Gate. Release locking mechanism by pressing locking button in while lifting handle. BUTTON MUST ALWAYS BE PRESSED IN WHEN LIFTING HANDLE. Lift walk-through section so hinge is raised and walk-through will swing open in either direction. Gate should always be in locked position.
An important point after buying a device Kidco G10 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Kidco G10 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Kidco G10 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Kidco G10 you will learn all the available features of the product, as well as information on its operation. The information that you get Kidco G10 will certainly help you make a decision on the purchase.
If you already are a holder of Kidco G10, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Kidco G10.
However, one of the most important roles played by the user manual is to help in solving problems with Kidco G10. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Kidco G10 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
