Instruction/ maintenance manual of the product LZ-760R Kenwood
Go to page of 24
7V WIDE T OUCH SCREEN MONIT OR LZ-760R INSTR UCTION MANU AL © B64-3159-00/00 (EV) LZ-760R_E_(En).indd 1 LZ-760R_E_(En).indd 1 05.6.7 10:29:03 AM 05.6.
2 | English C ontents Before Use .................................................... 3 Monitor Contr ol Function ........................... 4 • Pow er O ff • Switching the Monitor ’ s Picture .
English | 3 Be fore Use 2 W ARNING T o prevent injury and/or fire, take the following precautions: • Ensure that the unit is securely installed. Otherwise it may fly out of place during collisions and other jolts. • When extending the ignition, battery or ground wires, make sure to use automotive-grade wires or other wires with an area of 0.
4 | English Monitor C ontrol F unction PWR V .SEL MODE SCRN V olume Increasing V olume: Press the [ 5 ] button. Decreasing Volume: Press the [ ∞ ] button.
English | 5 Switching to the Screen C ontrol Screen Press the [SCRN] button. ( ☛ Page 6) Switching the Speak er Mode Press the [MODE] button f or at least 1 second.
6 | English Enter the Screen Con trol Screen Select the Screen Control mode by ref erring to "Switching t o the Screen Control Screen" (page 5).
English | 7 Monitor Contr ol Function Switching the A V Output T ouch the C area. When buttons are displayed , touching the C area switches the A V output mode as follows: Display Setting "Normal.
8 | English Setup Function Enter the Setup Menu Screen Press the [SCRN] button f or at least 1 second. Setup Menu Screen is displayed. Setting the System Setup T ouch the [System Setup] button. System Setup Screen-1 is display ed. ( ☛ Page 9) Setting the T V Setup T ouch the [ T V Setup] button.
English | 9 < Sy stem Setup > Setting the NA V input Setup input and switch method of the navigation picture. T ouch Setting [ 7 RGB] It becomes the RGB mode setting. Operate the V .SEL button when the image from the navigation unit connected to I/F terminal is shown on the monitor .
10 | English Setting the A V Output [A V-OUT ] T ouch Setting [ 7 Normal] Picture/sound with monitor picture. [ 7 Video 1]/ [ 7 NA V ] Picture/sound fr om A V-IN1 terminal. [ 7 Video 2]/ [ 7 R-Cam] Picture/sound fr om A V-IN2 terminal. [ 7 T V ] Picture/sound from t elevision.
English | 11 Setting the T V Area (During the KTC- V500E is connected) Select the area for T V broadcast viewing. Selecting the Preset Bands: T ouch the [ T V 1] or [ T V 2] button. Selecting the Reception Area: Each time you touch the [ 2 ] or [ 3 ] button.
Be fore Use 12 | English < T ouch P anel Adjustment > Adjusting the T ouch Position The touch panel can be adjusted if the position touched and the operation performed do not match. 1 Accurately touch the mark at the lo wer left. 2 Accurately touch the mark at the upper right.
English | 13 Setup Function LZ-760R_E_(En).indd 13 LZ-760R_E_(En).indd 13 05.6.7 10:29:10 AM 05.6.7 10:29:10 AM.
Be fore Use 14 | English Selecting the Preset Band T ouch the [Band] button. Each time the button is touched the preset band switches between the T V1 and TV2. Seek Mode Sets the seeking mode. T ouch the [Seek] button. Each time the button is touched the seeking mode switches as shown below .
English | 15 Station Preset Memory Putting the station in the memory. 1 Select the band T ouch the [Band] button. 2 Select the channel to put in the memor y T ouch the [ 4 ] or [ ¢ ] button. 3 Put the channel in the memory T ouch the [P1 ] — [P8] button for at least 1 seconds.
16 | English Installation The use of any accessories except for those pr ovided might result in damage to the unit. Make sure only to use the accessories shipped with the unit, as shown above. A ..........1 B ..........1 C ..........2 D ..........1 E .
English | 17 1. T o prevent short circuits, remove the key from the ignition and disconnect the · terminal of the battery . 2. Make the proper input and output cable connections for each unit. 3. Connect the wiring harness wires in the following order: ground, battery , ignition.
Be fore Use 18 | English Connection L FM/AM ANTENNA ( 5A ) B C + A B C A TV ANTENNA INPUT TO MONITOR UNIT POWER TO MONITOR TO TV TUNER L FM/AM ANTENNA ( 3A ) PRK SW TO NAVIGA TION AV 1 INPUT R VIDEO L.
English | 19 Be fore Use Installation Installation for Monitor Unit ■ Installation location and cleaning A B C Select for installation a location where the stand can be placed completely horizontal or where the front edge of the support (petal-shaped par t) can be attached horizontally as shown in Figur e A.
20 | English ■ Setting the Monitor Unit Accessory D Accessory G Protective strip Tighten Loosen Installation sur face Tighten Loosen 1 Bend the stand support to conform to the shape of the installation location. 2 Adjust the shape of the support so that there is no rattling or gap when the stand is placed on the support.
English | 21 ■ Attaching the Harness Band ■ Removing the Monitor Unit Raise the Release button. The Monitor Unit is unlocked, allowing you to detach it. Release button Secure the cable to the bracket using the supplied harness band (Accessory J ) .
22 | English Installation Installation for Video Bo x Unit 1 Use the screws (A ccessor y F ) to fix the bracket (Accessory C ) onto both sides of V ideo Box Unit.
English | 23 T roubleshooting Guide General ? T he power does not turn ON. ✔ The fuse has blown. ☞ After checking for short circuits in the wires, replace the fuse with one with the same rating. ✔ The motor is not attached t o the bracket securely.
24 | English Specifications Specifications subject to change without notice. Monitor Unit Screen size .....................................................................................................................................................
An important point after buying a device Kenwood LZ-760R (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Kenwood LZ-760R yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Kenwood LZ-760R - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Kenwood LZ-760R you will learn all the available features of the product, as well as information on its operation. The information that you get Kenwood LZ-760R will certainly help you make a decision on the purchase.
If you already are a holder of Kenwood LZ-760R, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Kenwood LZ-760R.
However, one of the most important roles played by the user manual is to help in solving problems with Kenwood LZ-760R. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Kenwood LZ-760R along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
