Instruction/ maintenance manual of the product KTC-SR903 Kenwood
Go to page of 20
KTC-SR903 SIRIUS SA TELLITE RADIO TUNER © PRINTED IN JAP AN B64-2876-00/00 (K) (A) T ake the time to read through this instruction manual. Familiarity with installation and operation procedures will help you obtain the best performance from your new sirius satellite radio tuner .
— 2 — English Contents What is Sirius Satellite Radio? ............................3 Safety precautions ...............................................4 Which is your control unit? .................................5 Operations from Model-A Control Unit .
— 3 — ❈ Displays shown in this manual are for descriptive purposes only , and may differ from actual displays. Sirius is radio the way it was meant to be: up to 100 new channels of digital quality programming delivered to listeners coast to coast via satellite.
English T o prevent injury and/or fire, take the following precautions: • Insert the unit all the way until it is fully locked in place. Otherwise it may fly out of place during collisions and other jolts. • T o prevent short circuits, never put or leave any metallic objects (e.
— 5 — Follow the <INSTRUCTION MANUAL> or the <INSTRUCTION MANUAL For The SIRIUS T uner Control> of the control unit if the operations of Sirius satellite radio tuner are explained in it. If not explained in the <INSTRUCTION MANUAL> of the control unit, the operations vary among Models A to D of the control unit.
— 6 — English Y ou must have the Sirius ID number [ESN] for licensing with Sirius Corp. Check the Sirius ID [ESN] of this unit as follows. 1 Select the Sirius Satellite Radio Mode Press the [SRC] button.
Select the category and channel you wish to listen to. <KDC-MP225, KDC-225MR, KDC-225, KDC-2025, KDC-MP222> 1 Enter category and channel search mode Press the [FM] button for at least 1 second. 2 Select the category Press the [FM] or [AM] button.
English Operations from Model-A Control Unit When you are listening to the Sirius satellite radio, you can switch over the display information as follows. For operations, see the <Switching Display> page of the instruction manual of your control unit.
— 9 — Operations from Model-B or C Control Unit Y ou must have the Sirius ID number [ESN] for licensing with Sirius Corp. Check the Sirius ID [ESN] of this unit as follows. <B models> 1 Select the Sirius Satellite Radio Mode Press the [SRC] button.
English — 10 — Operations from Model-B or C Control Unit Press the [FM] button. Each time the button is pressed the preset band switches between the SR1/Si1,SR2/Si2 and SR3/Si3. Selecting the Preset Band Listening to the satellite radio. Press the [SRC] button.
— 11 — When you are listening to the Sirius satellite radio, you can switch over the display information as follows. For operations, see the <Switching Display> page of the instruction manual of your control unit. What is displayed may partly depend on control units to be connected.
— 12 — English Operations from Model-D Control Unit Y ou must have the Sirius ID number [ESN] for licensing with Sirius Corp. Check the Sirius ID [ESN] of this unit as follows. 1 Select the Sirius Satellite Radio Mode Press the [SRC] button. Select the "SIRIUS" display .
Every receivable Channel is checked for 10 seconds. 1 Select a scan item from the menu item list. 2 Start Channel Scan Press the [ 4 ] or [ ¢ ] button for at least 1 second.
English Operations from Model-D Control Unit Entering the channel and tuning. 1 Enter Direct Access T uning mode Press the [DIRECT] button on the remote. 2 Enter the channel Press the number buttons. 3 Do Channel Search Press the [ 4 ] or [ ¢ ] button.
— 15 — 1. T o prevent short circuits, remove the key from the ignition and disconnect the - terminal of the battery . 2. Install the Sirius antenna and connect the antenna wire to the Sirius satellite radio tuner . 3. Connect the Sirius satellite radio tuner and the control unit using the provided Sirius connection wire.
English — 16 — Connecting Wires to T erminals Control unit Sirius Satellite Radio tuner Disc changer T o KENWOOD disc changer/ Sirius control input T o control unit KENWOOD disc changer control input Sirius antenna (Separated-sale product) T o connect the Disc changer , consult your Disc changer manual.
— 17 — CHANGER 2 TO CHANGER 1 TO H/U TO SWITCH AUX OFF ON SWITCH PROTOCOL ON IN AUX ] “N” HEAD UNIT TO Connect the KTC-SR903 to the terminal labelled TO CHANGER 2.
English — 18 — Mounting the Sirius Satellite radio tuner Unit • Install the Sirius satellite radio tuner unit in a well-ventilated location and do not place objects on top of it. • When installing to the car , the unit should be securely fastened at a location that will not interfere with driving.
— 19 — T roubleshooting Guide If you use this for the first time, it may be difficult to receive signals in the beginning. In such a case, leave the SIRIUS source ON for 3 minutes and turn it OFF and ON. What might appear to be a malfunction in your unit may just be the result of slight misoperation or miswiring.
— 20 — English Specifications Sirius tuner section Frequency range (Overall) .....................2320 MHz – 2332.5 MHz Frequency range (TDM Channel#1(fc)) ..................2322.293 MHz Frequency range (COFDM Channel(fc)) ...................2326.
An important point after buying a device Kenwood KTC-SR903 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Kenwood KTC-SR903 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Kenwood KTC-SR903 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Kenwood KTC-SR903 you will learn all the available features of the product, as well as information on its operation. The information that you get Kenwood KTC-SR903 will certainly help you make a decision on the purchase.
If you already are a holder of Kenwood KTC-SR903, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Kenwood KTC-SR903.
However, one of the most important roles played by the user manual is to help in solving problems with Kenwood KTC-SR903. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Kenwood KTC-SR903 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
