Instruction/ maintenance manual of the product CD-206 Kenwood
Go to page of 28
INSTRUCTION MANUAL KENWOOD CORPORA TION B60-3684-00 CH ( K,P,Y, M ,X ,T ) I D 99/12 11 10 9 8 7 6 5 4 3 2 1 98/12 11 10 9 8 7 6 5 4 3 2 1 This instruction manual is used for six models. Model availability and features (functions) may differ depending on the country and sales area.
CD-206/204/203/DPF-R6010/R4010/R3010 (En ) 2 Before applying power Caution : Read this section carefully to ensure safe operation. Units are designed for operation as follows. U.S.A. and Canada .........................................................
3 CD-206/204/203/DPF-R6010/R4010/R3010 (En ) Unpacking Unpack the unit carefully and make sure that all accessories are put aside so they will not be lost. Examine the unit for any possibility of shipping damage. If your unit is damaged or fails to operate, notify your dealer immediately.
CD-206/204/203/DPF-R6010/R4010/R3010 (En ) 4 L R CD SYSTEM CONTROL AC110-220V AC220-240V L R VARI ABLE LINE OUTPUT @ DIGITAL OUTPUT SYSTEM CONTROL OPTICAL COAXIAL SL16 XS 8 ƒ TEXT OPTICAL COAXIAL L R.
5 CD-206/204/203/DPF-R6010/R4010/R3010 (En ) OT UU PT 1 -d 2B The OUTPUT level (UP/DOWN) keys of the remote control unit can adjust the output levels from the LINE/OUT and PHONES jacks of the unit. Connect a stereo headphone to the PHONES jack of the CD player.
CD-206/204/203/DPF-R6010/R4010/R3010 (En) 6 DIGITAL AUDIO COMPACT MULTIPLE CD PLAYER DPF-R6010 D.R.I.V.E. TEXT TEXT DISP. ALL INFO. TIME DISP. REPEAT RANDOM P.
7 CD-206/204/203/DPF-R6010/R4010/R3010 (En) The keys with the same name as those on the remote control unit operate the same way as the remote control unit. 1 ON/STANDBY (POWER / ) switch 9 Turns the unit ON/STANDBY. 2 P.MODE key $ 3 TEXT DISP. key (CD-206/DPF-R6010 only) # Used to select the CD-TEXT information display.
CD-206/204/203/DPF-R6010/R4010/R3010 (En) 8 Operation of remote control unit (Except for CD-203/DPF-R3010) 1. The supplied batteries are intended for use in operation checks. Therefore, their lives may be shorter than ordinary batteries. 2. When the remote-controllable distance gets shorter than before, replace both batteries with new ones.
9 CD-206/204/203/DPF-R6010/R4010/R3010 (En) REMOTE CONTROL UNIT RC-P0601 I DC SR A EI D G N 1 D: C DE T T X « 1 Preparing to Play T racks Load/unload a disc. Close the tray. ALL TEXT SEARCH (CD-206/DPF-R6010 only) For most CD-TEXT discs, it is convenient to read the complete disc information into the CD player before playing the disc.
CD-206/204/203/DPF-R6010/R4010/R3010 (En) 10 SINGLE TOTAL 10 9 8 7 6 5 4 3 2 1 REPEAT TRACK NO. DISC NO. 5 4 3 2 1 01 2 18 : 1 Check that the unit is in the normal play TRACK mode.
11 CD-206/204/203/DPF-R6010/R4010/R3010 (En) Skipping tracks Playback from desired track 2 Select the desired track No. 1 Select the disc. ÷ The track in the direction of the pressed key is skipped, and the selected track will be played from the beginning.
CD-206/204/203/DPF-R6010/R4010/R3010 (En) 12 01 C A 01 L M N O P Q ... BCDEFGHIJKL MNOPQ. . . TT IE LX Z Y 2 0: 13 2 1 D0 1I TL TE B AC In the case of a CD-TEXT disc, the tracks to be heard can be searched by title. ÷ Load a disc (CD-TEXT support) in the CD player.
13 CD-206/204/203/DPF-R6010/R4010/R3010 (En) Displays (CD-206/DPF-R6010 only) ÷ When there is no text information to be displayed “– – – – –” is scrolled on the display. ÷ In the case of a non-CD-TEXT disc, the ”NO CD TEXT“ display will appear for approx.
CD-206/204/203/DPF-R6010/R4010/R3010 (En) 14 G P0 M1 1 DT O N2 .5 G P0 M1 1 DT O N2 .5 « G P0 M1 B AD CF EH G Programmed play (PGM mode) Use the following procedure to program desired tracks in a desired order. (up to 32 tracks) ÷ Load a disc in the CD player.
15 CD-206/204/203/DPF-R6010/R4010/R3010 (En) D G P0 M1 5TO N2 .5 T o check or change the programmed tracks 1 Press the CHECK key. Press until the track No. to be changed is displayed. 2 Select the disc. 3 Select the new track No. 4 Set the entry. T o add a track to the program 1 Select the disc.
CD-206/204/203/DPF-R6010/R4010/R3010 (En) 16 Press to clear tracks from the end. T o clear tracks from the program To clear all tracks ÷ Each time the key is pressed, the last track in the program is cleared. ÷ The tracks which are programmed earlier than the track being played cannot be cleared.
17 CD-206/204/203/DPF-R6010/R4010/R3010 (En) < <> < E <2 1> > <> > N RM D0 0 5 « Playback in a random order (Random playback) ™ As tracks are selected at random, you can enjoy listening to for a long time. ÷ Load a disc in the CD player.
CD-206/204/203/DPF-R6010/R4010/R3010 (En) 18 1 Press so that the “PGM” indicator lights. Repeated playback T o repeat only the programmed tracks : Keys and controls used in the operations described on this page. ™ Preparation ÷ Load a disc in the CD player.
19 CD-206/204/203/DPF-R6010/R4010/R3010 (En) T o repeat the entire disc This allows repeated playback of all the tracks on the disc loaded in the disc tray. 1 Press so that the “PGM” indicator goes off. 2 Press the REPEAT key. For the CD-206/DPF-R6010 The current status is displayed when the key is pressed once.
CD-206/204/203/DPF-R6010/R4010/R3010 (En) 20 Blinks. CD-206/DPF-R6010 D ET ID S I? C The following procedure allows to record a CD within the specified tape length so that no music is interrupted in the middle at the ends of sides A and B. Editing Preparation 1 Light the “EDIT” indicator.
21 CD-206/204/203/DPF-R6010/R4010/R3010 (En) Editing Light up. 1 Press so that the "MULTI EDIT " indicator light. : Keys and controls used in the operations described on this page. Enter the recording time of the tape. ) 2 Do this operation in the stop mode.
CD-206/204/203/DPF-R6010/R4010/R3010 (En) 22 ÷ The edited data is cleared entirely. T o clear the edited contents T o check the edited contents ÷ When the CHECK key is pressed, track numbers and remaining time in the file A are displayed first, then those in the file B.
23 CD-206/204/203/DPF-R6010/R4010/R3010 (En) T imer operations Timer playback of CD can be started at any time using an audio timer which is available in audio stores. 1 Turn the powers of the associated components ON. 2 Preparation Load a disc in the CD player.
CD-206/204/203/DPF-R6010/R4010/R3010 (En) 24 Never play a cracked or warped disc. Cleaning If fingerprints or foreign matter be- come attached to the disc, lightly wipe the disc with a soft cotton cloth (or similar) from the center of the disc outwards, in a radial manner.
25 CD-206/204/203/DPF-R6010/R4010/R3010 (En) ÷ Power plug is loosely connected. ÷ With the power plug connected to the switched AC outlet of an amplifier, the power of the amplifier is turned off. ÷ Disc is loaded upside down. ÷ Disc is loose. ÷ Disc is dirty.
CD-206/204/203/DPF-R6010/R4010/R3010 (En) 26 Specifications CD-206/DPF-R6010 [ Format ] System .......................... Compact disc digital audio system Laser ...................................................... Semiconductor laser [ D/A Convertors ] D/A Conversion .
27 CD-206/204/203/DPF-R6010/R4010/R3010 (En).
CD-206/204/203/DPF-R6010/R4010/R3010 (En) 28 For your records Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your dealer for information or service on this product.
An important point after buying a device Kenwood CD-206 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Kenwood CD-206 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Kenwood CD-206 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Kenwood CD-206 you will learn all the available features of the product, as well as information on its operation. The information that you get Kenwood CD-206 will certainly help you make a decision on the purchase.
If you already are a holder of Kenwood CD-206, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Kenwood CD-206.
However, one of the most important roles played by the user manual is to help in solving problems with Kenwood CD-206. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Kenwood CD-206 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
