Instruction/ maintenance manual of the product SF22-804 Kenmore
Go to page of 6
Date: 12/28/07 Parts & RepairServices S LR% (/g LAS H SF22-804 Page 1 of 6 To Be Read During Regular Working Hours Division 22, Source 790 Kenmore by EHP 24" Gas Self Clean Wall Ovens Poor Co.
Date: 12/28/07 Parts & RepaLr Services Illustration for the kit wiring... SF22-804 Page 2 of 6 IMPORTANT: Before servicing always remove power from the unit and turn off the gas supply. Remove the rear panel from the oven. It may also be helpful to remove the top cover for easier access to the thermostat and wires.
Date: 12/28/07 Parts & RepaLr Services SF22-804 Page 3 of 6 3. Position the new switch as shown in the photo. The new switch is held in place by a single screw on one end and the tab from the mounting bracket on the other end. 4. Secure the switch with the long screw and speed nut.
Date: 12/28/07 Parts & RepaLr Services SF22-804 Page 4 of 6 7. Install the resistor on the rear wall as shown in the photo. Carefully punch or drill a starter hole for the screw if necessary. 8. Use existing screw holes to install the new 120 ° thermostat to the left of the existing 170 ° thermostat.
Date: 12/28/07 Parts & RepaLr Services SF22-804 Page 5 of 6 11. Use the wire nut connector provided to connect the power wire that was attached to the 170 ° thermostat to the #1 wire from the "C" terminal of the new switch.
Date: 12/28/07 Parts & RepaLr Services SF22-804 Page 6 of 6 15. Connect the #5 (318052586 - Brown) wire to the remaining terminal of the 120 ° thermostat. Connect the other end to the "NO" terminal of the new switch PARTS: Order parts using the normal ordering procedure.
An important point after buying a device Kenmore SF22-804 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Kenmore SF22-804 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Kenmore SF22-804 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Kenmore SF22-804 you will learn all the available features of the product, as well as information on its operation. The information that you get Kenmore SF22-804 will certainly help you make a decision on the purchase.
If you already are a holder of Kenmore SF22-804, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Kenmore SF22-804.
However, one of the most important roles played by the user manual is to help in solving problems with Kenmore SF22-804. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Kenmore SF22-804 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
