Instruction/ maintenance manual of the product 790.9805 Kenmore
Go to page of 30
Use & Care Guide Manual de Uso y Cuidado English / Espa_ol Models/Modelos: 790.9805 _ Ke _orno P/N 318205206A (1003) Sears Brands Management Corporation Hoffman Estates, IL 60179 U.
Table of Contents Appliance Warranty .................................................. 2 Product Record ......................................................... 2 Serial Plate Location ................................................. 2 iMPORTANT SAFETY INSTRUCTIONS .
iMPORTANT SAFETY iNSTRUCTiONS Read all instructions before using this appliance. This manual contains important safety symbols and instructions. Please pay attention to these symbols and follow all instructions given. * Remove all tape and packaging before using the appliance.
iMPORTANT SAFETY iNSTRUCTiONS * Wear Proper Apparel. Loose-fitting or hanging * garments should never be worn while using the appliance. Do not let clothing or other flammable materials contact hot surfaces. Never use your appliance for * warming or heating the room.
iMPORTANT SAFETY iNSTRUCTiONS * Protective liners--Do not use aluminum foil to line the oven bottom. Only use aluminum foil as recommended in this manual, improper installation of these liners may result in risk of electric shock, or fire.
Range Features 0 Your electric range includes: 1. Electronic Oven Control with Timer 2. Left Front Element Control Knob & Indicator Light 3. Left Rear Element Control Knob & Indicator Light 4. Warm & Ready Zone Control Pads & Indicator Light 5.
Before Setting Surface Controls About the Ceramic Glass Cooktop The ceramic cooktop has radiant surface elements located below the surface of the glass. The design of the ceramic cooktop outlines the area of the surface element underneath. Make sure the diameter of the pan matches the diameter of the element outline on the cooktop (See Figure 1).
Setting Surface Controls Surface Cooking Settings Use the chart (Figure 1) to determine the correct setting for the kind of food you are preparing. The Simmer settings are used to simmer and keep larger quantities of foods warm such as stews and soups.
Setting Surface Controls Figure 1 Figure 2 Figure 3 Figure 4 (cont'd) Operating the Dual SurFace Radiant Element The cooktop is equipped with a dual radiant surface elements located at the right front (See Figure 2 & 4) position.
Surface Cooking Selecting Surface Cooking Cookware Cookware should have flat bottoms that make good contact with the entire surface heating element. Check for flatness by rotating a ruler across the bottom of the cookware (See Figure 1). Be sure to follow the recommendations for using cookware as shown in Figure 2.
Before Setting the Oven Controls The lower oven is equipped with a blower which runs in baking and self=cleanlng mode to keep all internal components at a cool temperature. The blower may keep running even if the oven has been turned off, until the components have cooled down.
Control Pad Features READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use of your oven, become familiar with the various features and functions of the oven as described below. Detailed instructions for each feature and function follow later in this Use & Care Guide.
Setting Oven Controls Note: The time of day must first be set in order to operate the oven. To Set the Clock The L_ pad is used to set the clock. The clock may be set for 12 or 24 hour time of day operation. The clock has been preset at the factory for the 12 hour operation.
Setting Oven Controls Note: The time of day must first be set in order to operate the oven. NOTICE : The illustrations and instructions contained in this document only refer to the lower oven operations.
Setting Oven Controls To Set the Timed Bake Feature The COOK TIME pad control the Timed Bake feature. Timed Bake allows the oven to be set to cook for a specific length of time and shut off: automatically. The oven will shut off: and will beep when the countdown is finished.
Setting Oven Controls Oven Baking For best cooking results, heat the oven before baking cookies, breads, cakes, pies or pastries, etc. There is no need to preheat the oven for roasting meat or baking casseroles. The cooking times and temperatures needed to bake a product may vary slightly from your previously owned appliance.
Setting Oven Controls Broil Broiling is a method of cooking tender cuts of meat by direct heat under the broil element of the oven. Be sure you center your broiler pan {available by mail order) directly under the broil element for best results. Arrange oven rack while oven is still cool.
Setting Oven Controls Setting the Warm & Hold TM Feature The Warm & Hold pad turns ON the Serve Warm & Hold feature and will maintain an oven temperature of 170°F (76°C). The Warm & Hold feature will keep oven baked foods warm for serving up to 3 hours after cooking has finished.
Setting Oven Controls To Set the Sabbath Feature (for use on the Jewish Sabbath & Holidays) The COOK TUME and DELAY START pads are used to set the Sabbath feature.
Adjusting the Oven Temperature Your oven thermostat has been precisely set at the factory. This setting may differ from your previous oven, however_ so your recipe times may not give you the results you expect.
Self-Cleaning During the self=cleanlng cy= tie, the outside of the wall oven can become very hot to the touch. DO NOT leave small children unaffended near the appliance. The health of some birds is extremely sensitive to the fumes given off: during the self-clean cycle of any wail oven.
Self-Cleaning What to Expect during Cleaning: While the oven is in operation, the oven heats to temperatures much higher than those used in normal cooking. Sounds of metal expansion and contraction are normal. Odor is also normal as the food soil is being removed.
General Care & Cleaning Cleaning Various Parts of Your Oven Before cleaning any part of the oven, be sure all controls are turned OFF: and the oven is COOL. REMOVE SPILLOVERS AND HEAVY SOILING AS SOON AS POSSIBLE. REGULAR CLEANINGS NOW WILL REDUCE THE EXTENT AND DIFFICULTY OF MAJOR CLEANING LATER.
General Care & Cleaning Ceramic Glass Cooktop Cleaning & Maintenance i_ Consistent and proper cleaning is essential to maintaining your Ceramic glass cooktop. Prior to using your cooktop for the first time, apply the recommended CookTop® Cleaning Creme to the ceramic surface (on the web visit www.
General Care & Cleaning Ceramic Glass Cooktop Cleaning & Maintenance Do not use the following on the ceramic glass caaktap: * Do not use abrasive cleaners and scouring pads, such as metal and some nylon pads. They may scratch the coaktop, making it more difflcult to clean.
General Care & Fig. 2 ] Aroun ; Oven door_ -, Fig. 3 Fig. 4 Cleaning Removing and Replacing the Lower Oven Lift-Off Door The door is heavy. For safe, temporary storage, lay the door flat with the inside of the door facing down. To Remove Oven Door: 1.
Before You Call Solutions fo Common Problems Before you call for service, review this list. It may save you time and expense. The list includes common occurrences that are not the result of defective workmanship or materials in this appliance. OCCURRENCE Oven Control Beeps and Displays any F code error (ex.
Before You Call Solutions to Common Problems OCCURRENCE Oven smokes excessively during broiling. Poor baking results. Oven light does not work. Fan noise during cooking operation. Self-cleanlng cycle does not work. Soll not completely removed after self- cleaning cycle is completed.
PROTECTION AGREEMENTS Master Protection Agreements Congratulations on making a smart purchase. Your new Kenmoree_product is designed and manufactured for years of dependable operation. But like all products, it may require preventive maintenance or repair from time to time.
Your Home For troubleshooting, product manuals and expert advice: manag www.managemylife.com For repair - in your home - of all major brand appliances, lawn and garden equipment, or heating and coolin.
An important point after buying a device Kenmore 790.9805 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Kenmore 790.9805 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Kenmore 790.9805 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Kenmore 790.9805 you will learn all the available features of the product, as well as information on its operation. The information that you get Kenmore 790.9805 will certainly help you make a decision on the purchase.
If you already are a holder of Kenmore 790.9805, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Kenmore 790.9805.
However, one of the most important roles played by the user manual is to help in solving problems with Kenmore 790.9805. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Kenmore 790.9805 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
