Instruction/ maintenance manual of the product PM-3L Andis Company
Go to page of 2
l'excès d'huile sur les lames à l'aide d'un chiffon sec et doux. Les lubrifiants en aérosol ne contiennent pas assez d'huile pour bien lubrifier les lames. Remplacez toujours les lames brisées ou ébréchées afin de prévenir les blessures.
CLIPPER BLADE ADJUSTMENT Y our Andis Adjustable Clipper Blade set is easy to adjust. From coarse to fine cuts, all that’ s needed is a flick of the adjustment lever with your thumb. In the upright position, blades are set for the finest, or shortest cuts.
An important point after buying a device Andis Company PM-3L (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Andis Company PM-3L yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Andis Company PM-3L - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Andis Company PM-3L you will learn all the available features of the product, as well as information on its operation. The information that you get Andis Company PM-3L will certainly help you make a decision on the purchase.
If you already are a holder of Andis Company PM-3L, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Andis Company PM-3L.
However, one of the most important roles played by the user manual is to help in solving problems with Andis Company PM-3L. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Andis Company PM-3L along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
