Instruction/ maintenance manual of the product 17568563 Kenmore
Go to page of 10
FOOD WASTE DISPOSERS GUIDE FOR EASY, TROUBLE-FREE INSTALLATION, CARE AND USE. HOW THIS GUIDE WILL HELP YOU. This guide describes everything you need to know to install your new food waste disposer, including care and use information.
INSTALLATION DIMENSIONS A I DRAWING REPRESENTATIVE OF A FOOD WASTE DISPOSER IMPORTANT:PLUMB WASTE LINE TO PREVENTSTAND- ING WATER IN DISPOSER MOTOR HOUSING.
REMOVING YOUR OLD DISPOSER. FIRST, TURN OFF ELECTRICAL POWER at the service panel (fuse box or circuit breaker box). If the mounting is the same as your new disposer's mounting, you can use the existing mounting. Follow instructions A through E, Step 2, then go on to Step 10.
4 HERE IS WHAT TO DO IF YOU ARE INSTALLING YOU R SINK'S FIRST DISPOSER, EXTENSION TUBE Use a pipe wrench to loosen the nut at the top of the drain trap.
w LET'S KEEP GOING...IT'S GETTING EASIER, WE HOPE. 7 NOW WE'RE GETTING INTO THE ACTUAL INSTALLATION. SEPARATE THE PARTS IN THE MOUNTING ASSEMBLY.
11 I'r!l WE'RE READY TO MAKE THE ELECTRICAL CONNECTIONS. NOTE: If using armored cable, we recommend installing an anti-short or insulation bushing in the end of the cable, A _onnector Wire nut Do not fold or remove the brown electrical insulation paper from inside the wiring compartment, Install the cable connector.
NEXT, MAKE If the cable leading to the disposer has three wires, at- tach the green ground wire to the green ground screw. SURE THE DISPOSER IS GROUNDED. !: d .,"T",'-'-i . Green Ground Screw If the cable leading to the disposer does not have a ground wire, use a copper wire that is no smaller than the other wire in your cable.
_r_- 15 NOW, ATTACH THE DISPOSER DISCHARGE TUBE TO YOUR SINK'S DRAIN TRAP. First, check inside the disposer grinding chain- ber to remove any objects or dirt that might have dropped in, Turn the disposer around to attach the discharge tube.
7 NOW, LOCKTHE DISPOSER IN PLACE. Place the end of your "wren- chette" or a screwdriver into the left side of one of the mounting ring lugs at the top of the dispose_ Then, turn the "wren- chette" or screwdriver to the right until the disposer locks in place.
INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRICAL SHOCK, OR INJURY TO PERSONS. DANGER - Improper connection o! the equip- ment-grounding conductor can result in a risk of electric shock. Check with a qualified electri- cian or serviceman if you are in doubt as to whether the appliance is properly grounded.
An important point after buying a device Kenmore 17568563 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Kenmore 17568563 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Kenmore 17568563 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Kenmore 17568563 you will learn all the available features of the product, as well as information on its operation. The information that you get Kenmore 17568563 will certainly help you make a decision on the purchase.
If you already are a holder of Kenmore 17568563, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Kenmore 17568563.
However, one of the most important roles played by the user manual is to help in solving problems with Kenmore 17568563. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Kenmore 17568563 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
