

Manual de Uso y Cuidado
Vacuum Cleaner
Aspiradora
IMPORTANT
Before returning this product-
For..replacement parts, please contact:
Sears Parts and Repair Center (1-800-4MY-HOME)
(1-800-469_4663) Anytime, day or night
(USA. and Canada)
For any other issue, please contact:
Vacuum Cleaner Help Line (1-877-531-7321)
8:00am-5:00pm EST, M-F (U.SA and Canada)
CtJlDADO: Lea y siga todaslas instrucciones de operaci6n y seguddad antes del uso de este producto_
Printed in Mexico Impreso en M6xico
Part No. CO tZDGU10UOO-KC01ZDGUZOUO
![Page 2 of the Kenmore 116.29915 user manual — PACKING LIST ]](/cdn/reader/ea/ea3a98b2afafab3f5e92be7884698dae523fa35a64c1659c392cbf0675f74d6a/images/page-2.webp?w=400)
![Kenmore 116.29915 — PACKING LIST ] diagram (page 2)](/cdn/reader/ea/ea3a98b2afafab3f5e92be7884698dae523fa35a64c1659c392cbf0675f74d6a/images/rimg-2.webp)
Canister Care 15
Before Using Your New Vacuum Cleaner 2
Removing Clogs t5 Bag Changing t6 Cleaning Extedor and Attachments I7 Motor Safety Filler Changing t7 Exhaust Filter Changing !8 PowerMate _ Care t9
Packing List 2 Kenmore Vacuum Cleaner Warranty. , 3
Assembly Instructions 7-8
Belt Changing and Agitator Cleaning 19-20 Bulb Changing 2I Dirt Sensor 22
Pet PowerMate _ Storage 8
Operating Instructions 9 How to Start 9-10 Vacuuming Tips 10-1t Suggested Pile Height Settings I1 Attachments 12 Attachment Use Table t3 Performance Features t3-15
Agitator Servicing 23
Troubleshooting 24-25
Master Protection Agreements 26
Requesting Assistance Or Service Back Cover
Please read this guide, It will help you assemble and operate your new Kenmore vacuum cleaner in the safest and most effective way.
For more information about vacuum cleaner care and operation, call your nearest Sears store. You will need the complete model and serial numbers when requesting information, "four vacuum cleaner's model and serial numbers are located on the Model and Serial
Use the space below to record the model number and serial number of your new Kenmore vacuum cleaner,
Keep this book and your sales check (receipt) in a safe place for future reference,,
Your KENMORE VACUUM CLEANER is packaged with the following parts and compo- nents assembled separately in the carton:
1 Canister Vacuum Cleaner I Combination Brush* i PowerMate® 1 Pet PowerMate® 1 Hose Assembly 1 Telescoping Wand 1 Floor Brush* 1 Use & Care Guide I Crevice Toot* 1 Parts List
Each of the above assemblies are shown in detail inside the Repair Parts List, *These items are found under the Tool Cover,,

![Kenmore 116.29915 — PACKING LIST ] diagram (page 3)](/cdn/reader/ea/ea3a98b2afafab3f5e92be7884698dae523fa35a64c1659c392cbf0675f74d6a/images/rimg-3.webp)
OneYearLimitedWarranty Whenassembled, operatedandmaintained according toallinstructions supplied with theproduct,ifthisvacuumcleanerfailsduetoadefectinmaterialorworkmanship within oneyearfromthedateofpurchase, returnittoanySearstore,SearsParts&Repair CenterorotherKenmore outletforfreerepair._
This warranty covers only defects in material and workmanship, Sears will NOT pay for: 1=, Expendable items that can wear out from normal use, including but not limited to filters, bells, light bulbs, and bags.. 2. A service technician to instruct the user in correct product assembly, operation or maintenanca.. 3.. A service technician to clean or maintain this product.. 4o Damage to or failure of this product if it is not assembled, operated or maintained according to all ins_Jctions supplied with the product.. 5_ Damage to or failure of this product resulting from accident, abuse, misuse or use for other than its intended purpose.. 6, Damage to or failure of this product caused by the use of detergents, cleaners, chemicals or utensils other than those recommended in all instructions supplied with the product. 7. Damage to or failure of parts or systems resulting from unauthorized modifications made to this producL
Disclaimer of implied warranties; limitation of remedies Customer's sole and exclusive remedy under this limited warranty shall be product repair as provided herein.. Implied warranties, including warranties of merchantability or fitness for a particular purpose, are limited to one year or the shortest period allowed by law. Sears shall not be liable for incidental or consequential damages._ Some states and provinces do not allow the exclusion or limitation of incidental or consequential damages, or limitations on the duration of implied warranties of merchantability or fitness, so these exclusions or limitations may not apply to you
This warranty applies only while this vacuum cleaner is used in the United States and
This warranty gives you specific legal dghts, and you may also have other rights which vary from state to state.,
Sears, Roebuck and Coo, Hoffman Estates, IL 60179 Sears Canada Inc.., Toronto. Ontario, Canada M5B 2B8
Canada_
![Page 4 of the Kenmore 116.29915 user manual — PACKING LIST ]](/cdn/reader/ea/ea3a98b2afafab3f5e92be7884698dae523fa35a64c1659c392cbf0675f74d6a/images/page-4.webp?w=400)
![Kenmore 116.29915 — PACKING LIST ] diagram (page 4)](/cdn/reader/ea/ea3a98b2afafab3f5e92be7884698dae523fa35a64c1659c392cbf0675f74d6a/images/rimg-4.webp)
Read all instructions in this manual before assembling or ustng your vacuum cleaner_ WARNmNG
Your safety is important to us_,To reduce the risk of fire, electrical shock, injur_y to persons or damage when usin_q your vacuum cleaner, follow {oasic satety precautions including the following:
Use extra care when cleaning on stairs.. Do not put on chairs, tables, etc. Keep on floor.
Use your vacuum cleaner only as descdbed in this manual.. Use only with Sears recommended attachments..
Disconnect electrical supply before servicing or cleaning out brush area. Failure to do so could result in electrical shock or brush suddenly starting.. Do not leave vacuum cleaner when plugged in.. Unplug from outlet when not in use and before servicing.
Do not use vacuum cleaner to pick up flammable or combustible liquids (gasoline, cleaning fluids, perfumes, etc), or use in areas where they may be present. The fumes from these substances can create a fire hazard or explosion
Do not pick up anything that is buming or smoking, such as cigarettes, matches, or hot ashes..
To reduce the dsk of electrical shock - Do not use outdoors or on wet surfaces
Do not use vacuum cleaner without dust bag andlor filters in place
Do not allow to be used as a toy. Close attention is necessary when used by or near children.
Always change the dust bag after vacuuming carpet cleaners or freshener, powders and fine dust. These products clog the bag, reduce airflow and can cause the bag to burst.. Failure to change bag could cause permanent damage to the vacuum cleaner_
Do not use with damaged cord or plug. if vacuum cleaner is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to a Sears Service Center.
Do not pull or carry by cord, use cord as a handle, close door on cord, or putt cord around sharp edges or comers Do not run vacuum cleaner over cord.. Keep cord away from heated surfaces.
Do not use the vacuum cleaner to pick up sharp hard objects, small toys, pins, paper clips, etc They may damage the vacuum cleaner or dust bag
Do not operate vacuum cleaner without the exhaust filter or exhaust filter door in place (If applicable)_
Do not unplug by pulling on cord To unplug, grasp the plug, not the cord
Do not handle plug orvacuum cleaner with wet hands
The hose contains electrical wires Do not use when damaged, cut, or punctured.. Replace if cut or worn Do not pick up sharp objects..
Do not put any objects into openings..
Do not use with any opening blocked; keep free of dust, tint, hair and anything that may reduce airf ow..
Always turn off and unplug the vacuum cleaner before connecting or disconnecting either hose, Handi-Mate Jr..® (if applicable), or nozzle
Keep hair, loose clothing, t_ngers, and all parts of body away from openings and moving parts
Hold plug when rewinding onto cord reel. Do not allow plug to whip when rewinding.
Turn off all controls before unplugging.
You are responsible for making sure that
your vacuum cleaner is not used by anyone unable to operate it properly SAVE THESE iNSTRUCTiONS
Proper assembly and safe use of your vacuum cleaner are your responsibilities., "Yourvacuum cleaner is intended for Household use, Read t,51s Use & Care Guide carefully for important use and safety information. This guide contains safety statements under warning and caution symbols.


It is important to know your vacuum cleaner's parts and features to ensure its proper and safe use_ Review these before using your vacuum cleaner,
Part No. Part No. Object Style No. in USA in Canada
Belt CB-3 20_5218 2040118
Headlight Bulb 20-5248 20.40601
Handle Quick Release Button
Adjust Button..--,. 1 Wand Light---_ _


ATTACHMENTS
3-Way On/Off Switch Off/Floor/Carpet
Electronic Suction Control Handle
Crevice Tool -_ _
CANISTER
Dust Bag Q 20,,50557 20:50410
Exhaust Filter EF-1 20-86889 2040324
Motor Safety Filter CF-1 20:86883 2040321
Tool Storage Cover CHECK BAG (Attachment Indicator Stora
Motor Safety Filter (Behind Dust Bag)


I,II,,U,U,I,H,U,HI,,U,UUlU,II,Ul,i UUl% ,IllUl Please pay special attention to these hazard alert boxes, and follow any instruc-
tions given. WARNING statements atert you to such dangers as fire, electric shock, burns and personal injury. CAUTION statements alert you to such dangers as personal injury and/or property damage.
DO NOT plug into electrical supply until assembly is complete. Failure to do so could result in electrical shock or injury.
Handle Quick Release Button. _
Before assembling vacuum cleaner, check the PACKING LIST_.Use this list to verify that you have received all the com- ponents of your new Kenmore vacuum cleanest.
The wand length I J is adjustable and ,) #
requires no assembly, To adjust, simply push down on the wand adjust but- ton and slide the Wand Length upper wand to Adjust the desired Burro. height,
Wand Length Adjust Button
When adjusting the wand length you may have to hold the PowerMate with your hand or foot.
tl _' The swivel, located on the PowerMate, allows
Swivel_..\_
L to turn the handle you to the left or right side _-- lo reach farther under low furniture
Insert wand into PowerMate until the wand button snaps into place.


HOSE
I,, Open the canister hood.
2, Check to see that the dust bag is properly installed See BAG CHANGING for instructions
3, Check to see that the motor safety filter is properly installed, See MOTOR SAFETY FILTER CHANGING for instructions,
To remove: Do not open hood before removing hose, With hood closed, depress hose latch tab and pull upward on hose,
It is normal for the canister hood and tool storage cover to come off when opened further than needed, Line up the hinge slots,
insert the hinges into the slots, and close the hood and tool storage cover to reinstall
To remove:
Press handle quick release button and pull up on handle,
Never open canister hood with the tool storage cover open, This will help to prevent damage from occurring to the canister hood and/or tool storage cover°
To store: Disconnect hose from wand and canister to prevent stress on hose during storage. Store hose in a loosely coiled position so the hose covering is not stressed°
This canister is equipped with an on-board storage area for a Pet PowerMate attachment.,
Storage Cover._.
Open the Pet PowerMate storage cover Insert the Pet PowerMate, press down into place, and close the lid securely,
Open the storage cover, Remove Pet PowerMate from the storage area and use as needed (see ATTACHMENTS and ATTACHMENT USE TABLE)_
Pet PowerMate


on. Contacting the agitator while it is rotating can __/_/_ cut, bruise or cause other injuries., Always turn off and unplug from electrical outlet before servicing,, Use caution when operating near children.
i illl i illl kWARNING
To rewind: Turn off and unplug the vacuum cleaner.
Hold the plug while rewinding to pre- vent damage or injury' from the moving cord, Push cord rewind button,,
DO NOT plug in if switch is in ON position, Personal injury or property damage could result° The cord moves rapidly when rewinding. Keep children away and provide a clear path when rewinding the cord to prevent personal injury,_ DO NOT use outlets above counters° Damage from cord to items in surrounding area could occur.
3oLower wand from upright position by pressing on the handle release pedal,
t_ I f_ Pile Height
Cord Rewind Button.
4,,Select a pile height setting by pressing the HEIGHT ADJUST pedal on the rear of the PowerMate, The pile height setting shows on the indicator,, See SUGGESTED PILE HEIGHT SETTINGS,
NOTE: To reduce the risk of electric shock, this vacuum cleaner has a polarized plug; one blade is wider than the other. This plug willfit in a potadzed outlet only one way, tf the plug does not fit fully in the outlet, reverse the piugo If it still does not fit, con- tact a qualified electrician to install the prop- er outtet, Do not change the plug in any way,
rift/ j_ · Release L_ · Pedal


5oSelectapositiononthehandlethree-way On/Offswitch.
OFF
DO NOT leave the PowerMate running in one spot in the upright position for any length of time. Damage to carpet
FLOOR - turns on the canister motor only
may occur.
CARPET - turns on both the canister and the PowerMate motors°
Suggested sweeping pattern.
For best cleaning action, the PowerMate should be pushed straight away from you and pulled straight back. At the end of each
Product Damage Hazard Use care if the PowerMate and wand is left in the upright position as it may tip over easily. Property damage can occur if tipped.
pull stroke, the direction of the PowerMate should be changed to point into the next section to be cleaned.. This pattern should
be continued across the carpet with stow, gliding motions,,
Personal injury and Product Damage Hazard
DO NOT run over power cord with PowerMate. Personal injury or product damage could result,
DO NOT pull plug from wall by the power cord. If there is damage to the cord or plug, personal injury or property damage could result,
rotates left and right for improved maneuvering in tight spaces and around corners,
The hose swivel allows the hose to turn without moving the •
canister This is _,_1_/_,_ helpful for cleaning in small areas. Check ,f_r "_," hose for twisting before pulling canister,
The nozzle swivel


The stair grip located on the caster will aid in preventing the canister from slipping when used on stairs (see PERFORMANCE FEATURES). %
Carpeted stairs suction need to be Control
For best cleaning results, use HIGH setting on electronic suction control.
vacuumed regularly. _
For best cleaning results, keep the airflow passage open Check each assembly area in REMOVING CLOGS occasionally for clogs_ Turn off and unplug vacuum cleaner from outlet before checking.
Use care if canister is placed on stairs° It may fall, causing personal injury or property damage.
Do not pull on the hose to move the canister from one stair to the next. When finished cleaning in one area use the handle grip on the canister to move the vacuum cleaner to a new location for further cleaning.
For best deep down cleaning, use the XLO setting, However, you may need to raise the
HI - Shag, deep pile, or scatter rugs,.
MED - Medium to deep pile,,
height to make some jobs easier, such as scatter rugs and some deep pile carpets,
LO - Low to medium pile,
and to prevent the vacuum cleaner from shutting off, Suggested settings are:
XLO - Most carpets and bare floors,,
Personal Injury Hazard · Product Damage Hazard · ti


i i _CAUTION
2oPress wand quick release pedaI with foot and pull the wand straight up and out of PowerMate
DO NOT attach or remove handle or wands while vacuum cleaner is ON. This could cause sparking and damage the electrical contacts or electronic controls.
Quick l]l Release Pedal
3_Put attach- ments on wand as needed See ATTACHMENT
USE TABLE.
Handle Quick rm= Release_,-
" Dusting To assemble,' . Brush
insert the fabric..
brush inta'_he / t _ dusting,bi'us,h'
2, Slide attachments firmly on handle as needed. See ATTACHMENT USE TABLE.
nozzfe,_3nd,'press Fabric into@lace', Brush
To remove, press latch and lift out..
i_ To remove : _ "_../_}"_ wand from , i ,_, ,i,¢-,Y PowerMate, :_ _.1_/" lock wand in i _- _-_ ,"_ straight-up )_ _ ";.,'
position "'


CLEANING AREA
Between Bare Carpeted ATTACHMENT Furniture1 Cushions1 Drapes I Stairs Floors :[0ors/Rugs W_lls
Crevice Tool V V
PowerMate' "' ','_,.1, i .
Pet PowerMate3,4 _ V v'
1, Always clean attachments before using on fabrics 2 3-way OnlOff switch should be in FLOOR position, 3 Some Models; Handi-mate Jr® and Pet PowerMate attachment instructions are included with the products 4. Pet PowerMate can only be used on the hose handle
OVERLOAD PROTECTOR kWARNING
The PowerMate has built-in protection against motor and belt Reset damage should the agitator jam. If the agitator slows down or stops, the overload protector shuts off the PowerMate and the red light will come on. The canister motor will continue to run,
Overload Protector/ Belt Reset
cleaner before cleaning the agitator area as agitator may suddenly restart, Failure to do so can result in personal injury.
Active brush edge cleaners are on both sides of the
PowerMate. Guide either side of the
To correct problem: Turn off and unplug vacuum cleaner, remove obstruction, then press BELT RESET button..
PowerMate along baseboards or next to furniture to help
remove dirt trapped at carpet edges
If the problem persists, have the vacuum cleaner serviced by a Sears or other qualified service agent..


ELECTRONIC SUCTION CONTROL
During normal operation while the canister is in the horizontal position, the caster wheel
The electronic suction control allows you to change the power of the vacuum cleaner suction motor
In o r to prevent the nister from
1stairs, _GRIP the feat
LOW POWER decreases suction for draperies and
Increase Suction .I
wheel in ,hen the
HIGH increases suction for
_osition.
MECHANICAL SUCTION CONTROL
This vacuum cfeaner is equipped with a light on the extension wand. This light wil! operate only when the vacuum cleaner is in CARPET mode (see HOW TO START). The light will operate when attached or not attached to the PowerMate
The mechanical suction control allows you to adjust the vacuum suction for very light fabrics,
Opening the control decreases suction white closing the control increases Suction suction.
The light can be used for lighting hard to
CHECK BAG INDICATOR
This vacuum cleaner has a thermal
When the vacuum CHECKBAG cleaner is running Indicator_ __ with normal airflow, _._" theC.ECKBAG !'Q-Z.q-..;. light is off,, The ./" "_. -- light comes on // _ _ whenever the /// f /, airflowbecomes _I! I_ "_'_t \ blocked. If that 9_rs, fifskF.heck the''_'- disposable dus[_o'ag., Then check the motor safety _ilterand other possible/.// clog Iocations_s_hown in REMOVING" CLOGS..
protector which automaticalfy trips to protect the vacuum cleaner from overheating, If a Hog prevents the normal flow of air to the m_otor,the thermal protector turns the motor off automatically, This allows the motor to cool in order to prevent possible damage to the vacuum cleaner,.
um cleaner to allow the vacuum cleaner to cool and the thermal protector to reset., Check for and remove clogs, if necessap.,-t,Also check and replace any clogged filters,, Wait approximately thirty (30) minutes and plug the vacuum cleaner in and turn back on to see if the motor protector has reseL


The DIRT SENSOR
When the PowerMate is being moved back and forth on the floor, the lightswillchange from one configuration to another as dirt is being vacuumed..As long as the red lights are on, dirt is passing through the wand to indicate that the surface still needs cleaning.
DIRT SENsoR
light system is mount- ed on the PowerMate nozzle near the reset button. It consists of a series of two red lights and two green lights..
When the green lights stay on as the
The lights give you an indicationof the amount of dirt particles that are passing through the sensor on its way to the dust bag..
PowerMate is moved back and forth over an area, the sensor is not seeing enough dirt to warrant further cleaning of that area.
When the PowerMate is first started, the fol- lowing light sequence occurs in a two-second time frame: IoTwo reds come on.
The vacuum cleaner creates suction that picks up dirt.. Rapidly moving air carries the ,i'f/ '_._ dirt to the dust bag through the airflow pas- //).,_ sages. The dust bag lets the air pass ,/_._/'
through, while it traps the dirt_ //// For best cleaning results, keep the airflow ,,,_>_y t passage openr Check the starred areas ..,_'._" [, occasio.ally foFclogs, Turnoffand #/ li unplug vacuum cleaner from outlet /
Motor · before checking __//


For best cleaning results, the dust bag should be changed often.. The CHECK BAG indicator will come on when the bag needs to be changed or the airflow is blocked..
t. Turn off and unplug vacuum cleaner.
Hood Release.
9, Tuck the bag securely into the bag cavity so that none of the bag is able to be pinched
3, Pull hood release out and up, then lift canister hood.
by the hood.
10, Close and latch canister hood
t2,. Plug cord into wall outlet.
NEVER REUSE A DUST BAG. Very fine materials, such as carpet freshener, face powder, fine dust, plaster, soot,
new carpet lint, etc. can clog the bag and cause it to burst before it is full and may cause damage to vacuum cleaner motor° Change bag more often when vacuuming these materials.
6oCheck the motor safety filter and replace, if necessar!..
t6


Do not use attachments if they are wet° Attachments used in dirty areas, such as under a refrigerator, should not be used on other surfaces until they are washed. They could leave marks.
/ = nlllm uuluull,lll.ul=
iL, ,WARNING
2° Lift the rubber ..4L_,j_'_/_ _ retainer and pull out motor safety filter as shown
Turn off and unplug vacuum cleaner Fromelectrical outlet. Do not operate the vacuum cleaner without the motor safety filter. Be sure the filter is dry and properly installed to prevent motor failure andlor electrical shock.
,.__ 3oReplace the fitter,
toward dust bag, by
sliding it back into place under the ribs in the bag cavity Tuck
This filter must be replaced when dirty It should be replaced regularly depending on use conditions° The filter CANNOT be washed as it will lose its dust trapping ability.
_ white side facing
_iRubber _" J filter in so that it fits _Retainer_ completely under the rubber retainer.
1oRemove the bag as outlined in the BAG CHANGING section.
Electrical Shock Hazard · Retainer S


Fire andlor Electrical Shock Hazard
Do not operate with a clogged exhaust filter or without the exhaust filter installed° Do not operate without filter cover installed.
5oTo replace the exhaust filter cover place the two tabs on the filter cover into the slots on the canister,
The exhaust filter cadridge must be replaced when dirty, Replace the filter when the entire surface area is covered
evenly, The filter CANNOT be washed as it will lose its dust trapping ability_
1,,Press latch down to release the exhaust filter cover from slot in canister.,
rotate filter cover into place..
2, Pull filter cover outward to remove from canister /
3oRemove the exhaust filter using the recess as shown
Exhaust


,d_WARNING
Electrical Shock Or Personal Injury Hazard
cleaner before performing maintenance to the vacuum cleaner, Failure to do so could result in electrical shock or personal injury from vacuum cleaner suddenly starting.
TO REMOVE BELT
'__ 1,.Remove the,.,.., _ wand by pressing thequick release
PowerMate upside down and unscrew two (2) PowerMate cover
Handle i = ,


then over be path.
The agitator must also be cleaned accord- ing to the following schedule:
HEAVY - (used daily)
LIGHT +
2oPlace agitator assembly into PowerMate.
Turn off and unplug vacuum cleaner from electrical outlet, Check and remove hair, string and lint build-up frequently in the
PowerMate agitator and end cap areas.
4+Line up front of cover and base Rest cover on front edge of base as shown,
Remove any dirt or debris in the belt path area or in the brush roller area,,
Carefully remove any stdng or debris located on the agitator or end caps,
_ End Cap Belt Path q
Brush Unit End Cap _
7, Turn PowerMate upside down and replace two (2) cover screws,


, WARNING
CAUTION
Electrical Shock Or Personal Injury Hazard
Do not use a bulb rated over 9W (13V)o During extended use, heat from the bulb could overheat surrounding plastic
Turn off and unplug vacuum cleaner before performing maintenance to the vacuum cleaner, Failure to do so could result in electrical shock or personal injury from the vacuum cleaner suddenly starting.
parts°,
4_To replace the light bulb, carefully insert fully into sloL
2,,Pry light lens out at slots as shown on both sides, Rotate lens up and Iift off,,
6, Rotate lens down and firmly snap into place,,
3, Remove the light bulb by pulling straight out.,
Flat


Although the dirt sensor feature in your Kenmore PowerMate_ is designed for years of trouble free use, the passage of dirt through the air passage system can coat the lenses causing the green light to come on and stay on - never switching to red. When this happens the lenses must be cleaned,
Never use water or any cleaning solution when cleaning the lenses. The residue of the water or cleaners will accelerate the recoating of the lenses and make cleaning necessary sooner.
Ap_prox.,
. Ring
3 ½ inches or 90 rnm
1oRemove the wand from the
PowerMate by pressing the quick release pedal and lifting up on the wand,
_._-_ Wand


TO REPLACE AGITATOR ASSEMBLY
_kWARNING
Electrical Shock Or Personal Injury Hazard
!o Remove PowerMate cover, belt and agitator assembly. See 'To Remove Belt" in BELT CHANGING AND AGITATOR CLEANING
Always turn off and unplug vacuum cleaner before performing maintenance to the vacuum cleaner. Failure to do so could result in electrical shock or personal injury from vacuum cleaner suddenly starting,
2,,Replace agitator assembly,
3_Reinstall belt and PowerMate cover. See "To replace belt" in BELT CHANGING AND AGITATOR CLEANING,,
When brushes are worn to the level of the base support bars, replace the agitator assembly
New Brushes Worn Brushes
Base Support · Bar


Review this table to find do-it-yourself solutions for minor performance problems, Any other
service needed should be performed by a Sears or other qualified service agent
Always turn off and unplug vacuum cleaner before performing maintenance to the vacuum cleaner. Failure to do so could result in electrical shock or personal injury°
Vacuum cleaner won't starL
t,, Unplugged at wall outlet
1oPlug in firmly, push ON/OFF switch to on 2. Reset circuit breaker or replace fuse
2., Tripped circuitbreaker/blown fuse at householdservice panel, 3. Loose hose electrical connections
3, Reconnect hose ends,,
Poor job of dirt to pick-up,, 2_ 3o 4_ 5. 6_ 7o 8o 9.
Full or clogged dust bag Clogged airflow passages. Dirty fillers. Wrong p_leheightsetting. Wrong power level selected Hole in hose. Worn PowerMata agitator Worn or broken belt Dirty agitator or end caps. Canister hood open Tripped overload protectorin PewerMate
Change bag Clear airflow passages Change fillers,, Adjust setting Adjust control Replace hose. Change agitator. See BELT CHANGING AND AGITATOR CLEANING Close and talch hood
ti,.
Remove any items lhat may be caught or jammed, lhen reset If vacuum cleaner starts and stops again, clean agitator and end caps, then reset,
Vacuum cleaner starts but shuts off.
1,, Check connections, reconnect hose ends 2oRemove any items that may be caught or jammed, then reset If vacuum cleaner starts and stops again, clean agitatorand end caps, then reset. 3,, See PERFORMANCE FEATURES - "Thermal Prolector"
PowerMate will not run when attached°
I,, Plug in firmly
2 & 3. See BELT CHANGING AND AGITATOR CLEANING,, 4. Remove any items that may be caught or jammed, then reset If vacuum cleaner starts and stops again, clean agitator and end caps, lhen reset, 5. Move switch to CARPET position,


Constant green Eighton 1. Dirt passage is dogged t Check for clogs in air passages. in dirt sensor, 2. Lenses ere dirty 2, Clean lenses,,
No green or red dirt 1o Switch not in CARPET position,, 1, Move swilch to CARPET position sensor lights, 2, No power to sensor board. 2. Take to your nearest Sears Service
CHECK BAG Indicator activates,
1,, Full or clogged dust bag 2,, Didy filters 3,, Blocked airflow passage 4_ Certain attachmenI tools
1, Change bag 2, Change filters 3, Clear blockage from airflow passage 4, This is normal Light should go off when tool is removed
Vacuum cleaner picks up moveable rugs -or- PowerMate pushes too hard.
I, Wrong pile height setting 2, Suction too strong
1, Adjust setting. 2 Select lower Power Level
Red light for BELT RESET (overload protector) is lit on the PowerMate,
!, Tripped overload protector in 1. Remove any items that may be PowerMate. caught or jammed, then reset. If vacuum cleaner starts and stops again, clean agitator and end caps. then reset
Io Dirty power cord 1. Clean the power cord 2., Cord jammed 2. Pull out cord and rewind
Vacuum cleaner leaves marks on carpet,
1., Wrong vacuuming pattern 1, See VACUUMING TIPS
Cen_er, · Cord won't rewind°


Congratulations on making a smart purchase. Your new Kenmore® product is designed and manufactured for years of dependable operation. But like all products, it may require preventive maintenance or repair from time to time. That's when having a Master Prolection Agreemenl can save you money and aggravation
The Master Protection Agreement also helps extend the life of your new product Here's what the Agreement" includes:
Parts and labor needed 10 help keep products operating properly under normal use, not just defects Our coverage goes well beyond the product warranty No deductibles, no functionat failure excluded from coverage-- real protection,,
Expert service by a force of more than 10,000 authorized Sears service technicians, which means someone you can trust will be working on your product
i_ Unlimited service calls and nationwide service, as often as you want us. whenever you want us..
I_ "No-lemon" guarantee - replacement of your covered product if four or more product failures occur within twelve months.
Product replacement if your covered product can't be fixed
Annual Preventive Maintenance Check at your request - no extra charge
Fast help by phone - we cat_it Rapid Resolution - phone support from a Sears representative on alt products.. Think of us as a "talking owner's manual"
I_ Power surge protection against electrical damage due to power fluctuations
$250 Food Loss Protection annually for any food spoilage that is 1he result of mechanical failure of any covered refrigerator or freezer.
I_ Rental reimbursement if repair of your covered product takes longer than promised..
I_ 10% discount off the regular price of any non-covered repair service and related installed parts
Once you purchase the Agreement, a simple phone call is all that it takes for you to schedule service You can call anytime day or night, or schedule a service appointment online
The Master Protection Agreement is a risk free purchase. If you cancel for any reason during the product warranty period, we wi|I provide a full refund. Or, a prorated refund anytime after the product warranty period expires Purchase your Master Protection Agreement today!
Some limitations and exclusions appty. For prices and additional information in the U.S.A. call 1-800-827-6655,,
* Coverage in Canada varies on some items° For full details call Sears Canada at 1-800- 361-6665_
For Sears professional installation of home appliances, garage door openers, water heaters, and other major home items, in the U S.A. or Canada cab 1-800--4-MY-HOME®..
Owners and our team usually reply within a day — and your question helps the next person too.
Be the first to ask — other owners or our team will answer.